cfg80211: remove enum ieee80211_band
This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
index c15f5be..bf1b69a 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.c
@@ -390,10 +390,10 @@
int n_channels, s8 max_txpower_avg)
{
int ch_idx;
- enum ieee80211_band band;
+ enum nl80211_band band;
band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
- IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+ NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
for (ch_idx = 0; ch_idx < n_channels; ch_idx++) {
struct ieee80211_channel *chan = &data->channels[ch_idx];
@@ -526,7 +526,7 @@
static void iwl_mod_ht40_chan_info(struct device *dev,
struct iwl_nvm_data *data, int n_channels,
- enum ieee80211_band band, u16 channel,
+ enum nl80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
u8 clear_ht40_extension_channel)
{
@@ -548,7 +548,7 @@
IWL_DEBUG_EEPROM(dev,
"HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
channel,
- band == IEEE80211_BAND_5GHZ ? "5.2" : "2.4",
+ band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
CHECK_AND_PRINT(IBSS),
CHECK_AND_PRINT(ACTIVE),
CHECK_AND_PRINT(RADAR),
@@ -606,8 +606,8 @@
n_channels++;
channel->hw_value = eeprom_ch_array[ch_idx];
- channel->band = (band == 1) ? IEEE80211_BAND_2GHZ
- : IEEE80211_BAND_5GHZ;
+ channel->band = (band == 1) ? NL80211_BAND_2GHZ
+ : NL80211_BAND_5GHZ;
channel->center_freq =
ieee80211_channel_to_frequency(
channel->hw_value, channel->band);
@@ -677,15 +677,15 @@
/* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
- enum ieee80211_band ieeeband;
+ enum nl80211_band ieeeband;
iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
&eeprom_ch_count, &eeprom_ch_info,
&eeprom_ch_array);
/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
- ieeeband = (band == 6) ? IEEE80211_BAND_2GHZ
- : IEEE80211_BAND_5GHZ;
+ ieeeband = (band == 6) ? NL80211_BAND_2GHZ
+ : NL80211_BAND_5GHZ;
/* Loop through each band adding each of the channels */
for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
@@ -708,7 +708,7 @@
int iwl_init_sband_channels(struct iwl_nvm_data *data,
struct ieee80211_supported_band *sband,
- int n_channels, enum ieee80211_band band)
+ int n_channels, enum nl80211_band band)
{
struct ieee80211_channel *chan = &data->channels[0];
int n = 0, idx = 0;
@@ -734,7 +734,7 @@
void iwl_init_ht_hw_capab(const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
struct ieee80211_sta_ht_cap *ht_info,
- enum ieee80211_band band,
+ enum nl80211_band band,
u8 tx_chains, u8 rx_chains)
{
int max_bit_rate = 0;
@@ -813,22 +813,22 @@
int n_used = 0;
struct ieee80211_supported_band *sband;
- sband = &data->bands[IEEE80211_BAND_2GHZ];
- sband->band = IEEE80211_BAND_2GHZ;
+ sband = &data->bands[NL80211_BAND_2GHZ];
+ sband->band = NL80211_BAND_2GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
sband->n_bitrates = N_RATES_24;
n_used += iwl_init_sband_channels(data, sband, n_channels,
- IEEE80211_BAND_2GHZ);
- iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_2GHZ,
+ NL80211_BAND_2GHZ);
+ iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, NL80211_BAND_2GHZ,
data->valid_tx_ant, data->valid_rx_ant);
- sband = &data->bands[IEEE80211_BAND_5GHZ];
- sband->band = IEEE80211_BAND_5GHZ;
+ sband = &data->bands[NL80211_BAND_5GHZ];
+ sband->band = NL80211_BAND_5GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS];
sband->n_bitrates = N_RATES_52;
n_used += iwl_init_sband_channels(data, sband, n_channels,
- IEEE80211_BAND_5GHZ);
- iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, IEEE80211_BAND_5GHZ,
+ NL80211_BAND_5GHZ);
+ iwl_init_ht_hw_capab(cfg, data, &sband->ht_cap, NL80211_BAND_5GHZ,
data->valid_tx_ant, data->valid_rx_ant);
if (n_channels != n_used)