ARM: tegra: add missing unit addresses to DT
DT node names should include a unit address iff the node has a reg
property. For Tegra DTs at least, we were previously applying a different
rule, namely that node names only needed to include a unit address if it
was required to make the node name unique. Consequently, many unit
addresses are missing. Add them.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 08cad69..bc28e27 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -10,7 +10,7 @@
reg = <0x80000000 0x7ff00000>;
};
- pcie-controller {
+ pcie-controller@00003000 {
status = "okay";
pex-clk-supply = <&sys_3v3_pexs_reg>;
vdd-supply = <&ldo1_reg>;
@@ -31,8 +31,8 @@
};
};
- host1x {
- hdmi {
+ host1x@50000000 {
+ hdmi@54280000 {
status = "okay";
vdd-supply = <&sys_3v3_reg>;
@@ -44,7 +44,7 @@
};
};
- pinmux {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -159,7 +159,7 @@
status = "okay";
clock-frequency = <100000>;
- rt5640: rt5640 {
+ rt5640: rt5640@1c {
compatible = "realtek,rt5640";
reg = <0x1c>;
interrupt-parent = <&gpio>;
@@ -168,7 +168,7 @@
<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
};
- tps62361 {
+ tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
@@ -296,13 +296,13 @@
};
};
- ahub {
+ ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
- pmc {
+ pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
@@ -342,7 +342,7 @@
#address-cells = <1>;
#size-cells = <0>;
- clk32k_in: clock {
+ clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;