usb: musb: Add pre and post root port reset end callbacks
The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.
The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 86c4b53..30842bc 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -195,8 +195,10 @@
msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
+ musb_platform_pre_root_reset_end(musb);
musb_writeb(mbase, MUSB_POWER,
power & ~MUSB_POWER_RESET);
+ musb_platform_post_root_reset_end(musb);
power = musb_readb(mbase, MUSB_POWER);
if (power & MUSB_POWER_HSMODE) {