rt2x00: Factor out TXWI writing to common rt2800 code.
TXWI writing is exactly the same for rt2800pci and rt2800usb, so
make it common code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b9ec081..bd56cd1 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -616,67 +616,13 @@
static int rt2800pci_write_tx_data(struct queue_entry* entry,
struct txentry_desc *txdesc)
{
- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct sk_buff *skb = entry->skb;
- struct skb_frame_desc *skbdesc;
int ret;
- __le32 *txwi;
- u32 word;
ret = rt2x00pci_write_tx_data(entry, txdesc);
if (ret)
return ret;
- skbdesc = get_skb_frame_desc(skb);
- txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
-
- /*
- * Initialize TX Info descriptor
- */
- rt2x00_desc_read(txwi, 0, &word);
- rt2x00_set_field32(&word, TXWI_W0_FRAG,
- test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
- rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
- rt2x00_set_field32(&word, TXWI_W0_TS,
- test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_AMPDU,
- test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
- rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->txop);
- rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
- rt2x00_set_field32(&word, TXWI_W0_BW,
- test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
- test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
- rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
- rt2x00_desc_write(txwi, 0, word);
-
- rt2x00_desc_read(txwi, 1, &word);
- rt2x00_set_field32(&word, TXWI_W1_ACK,
- test_bit(ENTRY_TXD_ACK, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_NSEQ,
- test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
- rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
- rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
- test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- txdesc->key_idx : 0xff);
- rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
- txdesc->length);
- rt2x00_set_field32(&word, TXWI_W1_PACKETID,
- skbdesc->entry->queue->qid + 1);
- rt2x00_desc_write(txwi, 1, word);
-
- /*
- * Always write 0 to IV/EIV fields, hardware will insert the IV
- * from the IVEIV register when TXD_W3_WIV is set to 0.
- * When TXD_W3_WIV is set to 1 it will use the IV data
- * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
- * crypto entry in the registers should be used to encrypt the frame.
- */
- _rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
- _rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+ rt2800_write_txwi(entry->skb, txdesc);
return 0;
}