phy: move fixed_phy MII register generation to a library
Move the fixed_phy MII register generation to a library to allow other
software phy implementations to use this code.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c
index 2d2e433..d98a0d9 100644
--- a/drivers/net/phy/fixed_phy.c
+++ b/drivers/net/phy/fixed_phy.c
@@ -24,6 +24,8 @@
#include <linux/of.h>
#include <linux/gpio.h>
+#include "swphy.h"
+
#define MII_REGS_NUM 29
struct fixed_mdio_bus {
@@ -48,101 +50,10 @@
static int fixed_phy_update_regs(struct fixed_phy *fp)
{
- u16 bmsr = BMSR_ANEGCAPABLE;
- u16 bmcr = 0;
- u16 lpagb = 0;
- u16 lpa = 0;
-
if (gpio_is_valid(fp->link_gpio))
fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio);
- if (fp->status.duplex) {
- switch (fp->status.speed) {
- case 1000:
- bmsr |= BMSR_ESTATEN;
- break;
- case 100:
- bmsr |= BMSR_100FULL;
- break;
- case 10:
- bmsr |= BMSR_10FULL;
- break;
- default:
- break;
- }
- } else {
- switch (fp->status.speed) {
- case 1000:
- bmsr |= BMSR_ESTATEN;
- break;
- case 100:
- bmsr |= BMSR_100HALF;
- break;
- case 10:
- bmsr |= BMSR_10HALF;
- break;
- default:
- break;
- }
- }
-
- if (fp->status.link) {
- bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE;
-
- if (fp->status.duplex) {
- bmcr |= BMCR_FULLDPLX;
-
- switch (fp->status.speed) {
- case 1000:
- bmcr |= BMCR_SPEED1000;
- lpagb |= LPA_1000FULL;
- break;
- case 100:
- bmcr |= BMCR_SPEED100;
- lpa |= LPA_100FULL;
- break;
- case 10:
- lpa |= LPA_10FULL;
- break;
- default:
- pr_warn("fixed phy: unknown speed\n");
- return -EINVAL;
- }
- } else {
- switch (fp->status.speed) {
- case 1000:
- bmcr |= BMCR_SPEED1000;
- lpagb |= LPA_1000HALF;
- break;
- case 100:
- bmcr |= BMCR_SPEED100;
- lpa |= LPA_100HALF;
- break;
- case 10:
- lpa |= LPA_10HALF;
- break;
- default:
- pr_warn("fixed phy: unknown speed\n");
- return -EINVAL;
- }
- }
-
- if (fp->status.pause)
- lpa |= LPA_PAUSE_CAP;
-
- if (fp->status.asym_pause)
- lpa |= LPA_PAUSE_ASYM;
- }
-
- fp->regs[MII_PHYSID1] = 0;
- fp->regs[MII_PHYSID2] = 0;
-
- fp->regs[MII_BMSR] = bmsr;
- fp->regs[MII_BMCR] = bmcr;
- fp->regs[MII_LPA] = lpa;
- fp->regs[MII_STAT1000] = lpagb;
-
- return 0;
+ return swphy_update_regs(fp->regs, &fp->status);
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)