| /* -*- linux-c -*- ------------------------------------------------------- * |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * Copyright 2007 rPath, Inc. - All Rights Reserved |
| * |
| * This file is part of the Linux kernel, and is made available under |
| * the terms of the GNU General Public License version 2. |
| * |
| * ----------------------------------------------------------------------- */ |
| |
| /* |
| * Prepare the machine for transition to protected mode. |
| */ |
| |
| #include "boot.h" |
| #include <asm/segment.h> |
| |
| /* |
| * Invoke the realmode switch hook if present; otherwise |
| * disable all interrupts. |
| */ |
| static void realmode_switch_hook(void) |
| { |
| if (boot_params.hdr.realmode_swtch) { |
| asm volatile("lcallw *%0" |
| : : "m" (boot_params.hdr.realmode_swtch) |
| : "eax", "ebx", "ecx", "edx"); |
| } else { |
| asm volatile("cli"); |
| outb(0x80, 0x70); /* Disable NMI */ |
| io_delay(); |
| } |
| } |
| |
| /* |
| * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000. |
| * A bzImage kernel is loaded and runs at 0x100000. |
| */ |
| static void move_kernel_around(void) |
| { |
| /* Note: rely on the compile-time option here rather than |
| the LOADED_HIGH flag. The Qemu kernel loader unconditionally |
| sets the loadflags to zero. */ |
| #ifndef __BIG_KERNEL__ |
| u16 dst_seg, src_seg; |
| u32 syssize; |
| |
| dst_seg = 0x1000 >> 4; |
| src_seg = 0x10000 >> 4; |
| syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */ |
| |
| while (syssize) { |
| int paras = (syssize >= 0x1000) ? 0x1000 : syssize; |
| int dwords = paras << 2; |
| |
| asm volatile("pushw %%es ; " |
| "pushw %%ds ; " |
| "movw %1,%%es ; " |
| "movw %2,%%ds ; " |
| "xorw %%di,%%di ; " |
| "xorw %%si,%%si ; " |
| "rep;movsl ; " |
| "popw %%ds ; " |
| "popw %%es" |
| : "+c" (dwords) |
| : "r" (dst_seg), "r" (src_seg) |
| : "esi", "edi"); |
| |
| syssize -= paras; |
| dst_seg += paras; |
| src_seg += paras; |
| } |
| #endif |
| } |
| |
| /* |
| * Disable all interrupts at the legacy PIC. |
| */ |
| static void mask_all_interrupts(void) |
| { |
| outb(0xff, 0xa1); /* Mask all interrupts on the secondary PIC */ |
| io_delay(); |
| outb(0xfb, 0x21); /* Mask all but cascade on the primary PIC */ |
| io_delay(); |
| } |
| |
| /* |
| * Reset IGNNE# if asserted in the FPU. |
| */ |
| static void reset_coprocessor(void) |
| { |
| outb(0, 0xf0); |
| io_delay(); |
| outb(0, 0xf1); |
| io_delay(); |
| } |
| |
| /* |
| * Set up the GDT |
| */ |
| #define GDT_ENTRY(flags, base, limit) \ |
| (((u64)(base & 0xff000000) << 32) | \ |
| ((u64)flags << 40) | \ |
| ((u64)(limit & 0x00ff0000) << 32) | \ |
| ((u64)(base & 0x00ffffff) << 16) | \ |
| ((u64)(limit & 0x0000ffff))) |
| |
| struct gdt_ptr { |
| u16 len; |
| u32 ptr; |
| } __attribute__((packed)); |
| |
| static void setup_gdt(void) |
| { |
| /* There are machines which are known to not boot with the GDT |
| being 8-byte unaligned. Intel recommends 16 byte alignment. */ |
| static const u64 boot_gdt[] __attribute__((aligned(16))) = { |
| /* CS: code, read/execute, 4 GB, base 0 */ |
| [GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff), |
| /* DS: data, read/write, 4 GB, base 0 */ |
| [GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff), |
| /* TSS: 32-bit tss, 104 bytes, base 4096 */ |
| /* We only have a TSS here to keep Intel VT happy; |
| we don't actually use it for anything. */ |
| [GDT_ENTRY_BOOT_TSS] = GDT_ENTRY(0x0089, 4096, 103), |
| }; |
| /* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead |
| of the gdt_ptr contents. Thus, make it static so it will |
| stay in memory, at least long enough that we switch to the |
| proper kernel GDT. */ |
| static struct gdt_ptr gdt; |
| |
| gdt.len = sizeof(boot_gdt)-1; |
| gdt.ptr = (u32)&boot_gdt + (ds() << 4); |
| |
| asm volatile("lgdtl %0" : : "m" (gdt)); |
| } |
| |
| /* |
| * Set up the IDT |
| */ |
| static void setup_idt(void) |
| { |
| static const struct gdt_ptr null_idt = {0, 0}; |
| asm volatile("lidtl %0" : : "m" (null_idt)); |
| } |
| |
| /* |
| * Actual invocation sequence |
| */ |
| void go_to_protected_mode(void) |
| { |
| /* Hook before leaving real mode, also disables interrupts */ |
| realmode_switch_hook(); |
| |
| /* Move the kernel/setup to their final resting places */ |
| move_kernel_around(); |
| |
| /* Enable the A20 gate */ |
| if (enable_a20()) { |
| puts("A20 gate not responding, unable to boot...\n"); |
| die(); |
| } |
| |
| /* Reset coprocessor (IGNNE#) */ |
| reset_coprocessor(); |
| |
| /* Mask all interrupts in the PIC */ |
| mask_all_interrupts(); |
| |
| /* Actual transition to protected mode... */ |
| setup_idt(); |
| setup_gdt(); |
| protected_mode_jump(boot_params.hdr.code32_start, |
| (u32)&boot_params + (ds() << 4)); |
| } |