[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omap
Patch from Tony Lindgren
This patch move common OMAP code from arch-omap to plat-omap
directory.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
new file mode 100644
index 0000000..10c3f22
--- /dev/null
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -0,0 +1,685 @@
+/*
+ * linux/arch/arm/plat-omap/mcbsp.c
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Samuel Ortiz <samuel.ortiz@nokia.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/mcbsp.h>
+
+#include <asm/hardware/clock.h>
+
+#ifdef CONFIG_MCBSP_DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...) do { } while (0)
+#endif
+
+struct omap_mcbsp {
+ u32 io_base;
+ u8 id;
+ u8 free;
+ omap_mcbsp_word_length rx_word_length;
+ omap_mcbsp_word_length tx_word_length;
+
+ /* IRQ based TX/RX */
+ int rx_irq;
+ int tx_irq;
+
+ /* DMA stuff */
+ u8 dma_rx_sync;
+ short dma_rx_lch;
+ u8 dma_tx_sync;
+ short dma_tx_lch;
+
+ /* Completion queues */
+ struct completion tx_irq_completion;
+ struct completion rx_irq_completion;
+ struct completion tx_dma_completion;
+ struct completion rx_dma_completion;
+
+ spinlock_t lock;
+};
+
+static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
+static struct clk *mcbsp_dsp_ck = 0;
+static struct clk *mcbsp_api_ck = 0;
+
+
+static void omap_mcbsp_dump_reg(u8 id)
+{
+ DBG("**** MCBSP%d regs ****\n", mcbsp[id].id);
+ DBG("DRR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2));
+ DBG("DRR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1));
+ DBG("DXR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2));
+ DBG("DXR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1));
+ DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2));
+ DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1));
+ DBG("RCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2));
+ DBG("RCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1));
+ DBG("XCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2));
+ DBG("XCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1));
+ DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2));
+ DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1));
+ DBG("PCR0: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0));
+ DBG("***********************\n");
+}
+
+
+static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id);
+
+ DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+
+ complete(&mcbsp_tx->tx_irq_completion);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id);
+
+ DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+
+ complete(&mcbsp_rx->rx_irq_completion);
+ return IRQ_HANDLED;
+}
+
+
+static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
+{
+ struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data);
+
+ DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+
+ /* We can free the channels */
+ omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
+ mcbsp_dma_tx->dma_tx_lch = -1;
+
+ complete(&mcbsp_dma_tx->tx_dma_completion);
+}
+
+static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
+{
+ struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data);
+
+ DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+
+ /* We can free the channels */
+ omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
+ mcbsp_dma_rx->dma_rx_lch = -1;
+
+ complete(&mcbsp_dma_rx->rx_dma_completion);
+}
+
+
+/*
+ * omap_mcbsp_config simply write a config to the
+ * appropriate McBSP.
+ * You either call this function or set the McBSP registers
+ * by yourself before calling omap_mcbsp_start().
+ */
+
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config)
+{
+ u32 io_base = mcbsp[id].io_base;
+
+ DBG("OMAP-McBSP: McBSP%d io_base: 0x%8x\n", id+1, io_base);
+
+ /* We write the given config */
+ OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1);
+ OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2);
+ OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1);
+ OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2);
+ OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1);
+ OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2);
+ OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1);
+ OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
+ OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
+ OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+}
+
+
+
+static int omap_mcbsp_check(unsigned int id)
+{
+ if (cpu_is_omap730()) {
+ if (id > OMAP_MAX_MCBSP_COUNT - 1) {
+ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+ return -1;
+ }
+ return 0;
+ }
+
+ if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+ if (id > OMAP_MAX_MCBSP_COUNT) {
+ printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
+ return -1;
+ }
+ return 0;
+ }
+
+ return -1;
+}
+
+#define EN_XORPCK 1
+#define DSP_RSTCT2 0xe1008014
+
+static void omap_mcbsp_dsp_request(void)
+{
+ if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+ omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)),
+ ARM_RSTCT1);
+ clk_enable(mcbsp_dsp_ck);
+ clk_enable(mcbsp_api_ck);
+
+ /* enable 12MHz clock to mcbsp 1 & 3 */
+ __raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK),
+ DSP_IDLECT2);
+ __raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
+ DSP_RSTCT2);
+ }
+}
+
+static void omap_mcbsp_dsp_free(void)
+{
+ /* Useless for now */
+}
+
+
+int omap_mcbsp_request(unsigned int id)
+{
+ int err;
+
+ if (omap_mcbsp_check(id) < 0)
+ return -EINVAL;
+
+ /*
+ * On 1510, 1610 and 1710, McBSP1 and McBSP3
+ * are DSP public peripherals.
+ */
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+ omap_mcbsp_dsp_request();
+
+ spin_lock(&mcbsp[id].lock);
+ if (!mcbsp[id].free) {
+ printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1);
+ spin_unlock(&mcbsp[id].lock);
+ return -1;
+ }
+
+ mcbsp[id].free = 0;
+ spin_unlock(&mcbsp[id].lock);
+
+ /* We need to get IRQs here */
+ err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0,
+ "McBSP",
+ (void *) (&mcbsp[id]));
+ if (err != 0) {
+ printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n",
+ mcbsp[id].tx_irq, mcbsp[id].id);
+ return err;
+ }
+
+ init_completion(&(mcbsp[id].tx_irq_completion));
+
+
+ err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0,
+ "McBSP",
+ (void *) (&mcbsp[id]));
+ if (err != 0) {
+ printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n",
+ mcbsp[id].rx_irq, mcbsp[id].id);
+ free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+ return err;
+ }
+
+ init_completion(&(mcbsp[id].rx_irq_completion));
+ return 0;
+
+}
+
+void omap_mcbsp_free(unsigned int id)
+{
+ if (omap_mcbsp_check(id) < 0)
+ return;
+
+ if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3)
+ omap_mcbsp_dsp_free();
+
+ spin_lock(&mcbsp[id].lock);
+ if (mcbsp[id].free) {
+ printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1);
+ spin_unlock(&mcbsp[id].lock);
+ return;
+ }
+
+ mcbsp[id].free = 1;
+ spin_unlock(&mcbsp[id].lock);
+
+ /* Free IRQs */
+ free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id]));
+ free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id]));
+}
+
+/*
+ * Here we start the McBSP, by enabling the sample
+ * generator, both transmitter and receivers,
+ * and the frame sync.
+ */
+void omap_mcbsp_start(unsigned int id)
+{
+ u32 io_base;
+ u16 w;
+
+ if (omap_mcbsp_check(id) < 0)
+ return;
+
+ io_base = mcbsp[id].io_base;
+
+ mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7);
+ mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7);
+
+ /* Start the sample generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+
+ /* Enable transmitter and receiver */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+
+ w = OMAP_MCBSP_READ(io_base, SPCR1);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+
+ udelay(100);
+
+ /* Start frame sync */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+
+ /* Dump McBSP Regs */
+ omap_mcbsp_dump_reg(id);
+
+}
+
+void omap_mcbsp_stop(unsigned int id)
+{
+ u32 io_base;
+ u16 w;
+
+ if (omap_mcbsp_check(id) < 0)
+ return;
+
+ io_base = mcbsp[id].io_base;
+
+ /* Reset transmitter */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+
+ /* Reset receiver */
+ w = OMAP_MCBSP_READ(io_base, SPCR1);
+ OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+
+ /* Reset the sample rate generator */
+ w = OMAP_MCBSP_READ(io_base, SPCR2);
+ OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+}
+
+
+/*
+ * IRQ based word transmission.
+ */
+void omap_mcbsp_xmit_word(unsigned int id, u32 word)
+{
+ u32 io_base;
+ omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length;
+
+ if (omap_mcbsp_check(id) < 0)
+ return;
+
+ io_base = mcbsp[id].io_base;
+
+ wait_for_completion(&(mcbsp[id].tx_irq_completion));
+
+ if (word_length > OMAP_MCBSP_WORD_16)
+ OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16);
+ OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff);
+}
+
+u32 omap_mcbsp_recv_word(unsigned int id)
+{
+ u32 io_base;
+ u16 word_lsb, word_msb = 0;
+ omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length;
+
+ if (omap_mcbsp_check(id) < 0)
+ return -EINVAL;
+
+ io_base = mcbsp[id].io_base;
+
+ wait_for_completion(&(mcbsp[id].rx_irq_completion));
+
+ if (word_length > OMAP_MCBSP_WORD_16)
+ word_msb = OMAP_MCBSP_READ(io_base, DRR2);
+ word_lsb = OMAP_MCBSP_READ(io_base, DRR1);
+
+ return (word_lsb | (word_msb << 16));
+}
+
+
+/*
+ * Simple DMA based buffer rx/tx routines.
+ * Nothing fancy, just a single buffer tx/rx through DMA.
+ * The DMA resources are released once the transfer is done.
+ * For anything fancier, you should use your own customized DMA
+ * routines and callbacks.
+ */
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+{
+ int dma_tx_ch;
+
+ if (omap_mcbsp_check(id) < 0)
+ return -EINVAL;
+
+ if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback,
+ &mcbsp[id],
+ &dma_tx_ch)) {
+ printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1);
+ return -EAGAIN;
+ }
+ mcbsp[id].dma_tx_lch = dma_tx_ch;
+
+ DBG("TX DMA on channel %d\n", dma_tx_ch);
+
+ init_completion(&(mcbsp[id].tx_dma_completion));
+
+ omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch,
+ OMAP_DMA_DATA_TYPE_S16,
+ length >> 1, 1,
+ OMAP_DMA_SYNC_ELEMENT);
+
+ omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
+ OMAP_DMA_PORT_TIPB,
+ OMAP_DMA_AMODE_CONSTANT,
+ mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1);
+
+ omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
+ OMAP_DMA_PORT_EMIFF,
+ OMAP_DMA_AMODE_POST_INC,
+ buffer);
+
+ omap_start_dma(mcbsp[id].dma_tx_lch);
+ wait_for_completion(&(mcbsp[id].tx_dma_completion));
+ return 0;
+}
+
+
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length)
+{
+ int dma_rx_ch;
+
+ if (omap_mcbsp_check(id) < 0)
+ return -EINVAL;
+
+ if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback,
+ &mcbsp[id],
+ &dma_rx_ch)) {
+ printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1);
+ return -EAGAIN;
+ }
+ mcbsp[id].dma_rx_lch = dma_rx_ch;
+
+ DBG("RX DMA on channel %d\n", dma_rx_ch);
+
+ init_completion(&(mcbsp[id].rx_dma_completion));
+
+ omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch,
+ OMAP_DMA_DATA_TYPE_S16,
+ length >> 1, 1,
+ OMAP_DMA_SYNC_ELEMENT);
+
+ omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
+ OMAP_DMA_PORT_TIPB,
+ OMAP_DMA_AMODE_CONSTANT,
+ mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1);
+
+ omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
+ OMAP_DMA_PORT_EMIFF,
+ OMAP_DMA_AMODE_POST_INC,
+ buffer);
+
+ omap_start_dma(mcbsp[id].dma_rx_lch);
+ wait_for_completion(&(mcbsp[id].rx_dma_completion));
+ return 0;
+}
+
+
+/*
+ * SPI wrapper.
+ * Since SPI setup is much simpler than the generic McBSP one,
+ * this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
+ * Once this is done, you can call omap_mcbsp_start().
+ */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg)
+{
+ struct omap_mcbsp_reg_cfg mcbsp_cfg;
+
+ if (omap_mcbsp_check(id) < 0)
+ return;
+
+ memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
+
+ /* SPI has only one frame */
+ mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
+ mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
+
+ /* Clock stop mode */
+ if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
+ mcbsp_cfg.spcr1 |= (1 << 12);
+ else
+ mcbsp_cfg.spcr1 |= (3 << 11);
+
+ /* Set clock parities */
+ if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
+ mcbsp_cfg.pcr0 |= CLKRP;
+ else
+ mcbsp_cfg.pcr0 &= ~CLKRP;
+
+ if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
+ mcbsp_cfg.pcr0 &= ~CLKXP;
+ else
+ mcbsp_cfg.pcr0 |= CLKXP;
+
+ /* Set SCLKME to 0 and CLKSM to 1 */
+ mcbsp_cfg.pcr0 &= ~SCLKME;
+ mcbsp_cfg.srgr2 |= CLKSM;
+
+ /* Set FSXP */
+ if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
+ mcbsp_cfg.pcr0 &= ~FSXP;
+ else
+ mcbsp_cfg.pcr0 |= FSXP;
+
+ if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
+ mcbsp_cfg.pcr0 |= CLKXM;
+ mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1);
+ mcbsp_cfg.pcr0 |= FSXM;
+ mcbsp_cfg.srgr2 &= ~FSGM;
+ mcbsp_cfg.xcr2 |= XDATDLY(1);
+ mcbsp_cfg.rcr2 |= RDATDLY(1);
+ }
+ else {
+ mcbsp_cfg.pcr0 &= ~CLKXM;
+ mcbsp_cfg.srgr1 |= CLKGDV(1);
+ mcbsp_cfg.pcr0 &= ~FSXM;
+ mcbsp_cfg.xcr2 &= ~XDATDLY(3);
+ mcbsp_cfg.rcr2 &= ~RDATDLY(3);
+ }
+
+ mcbsp_cfg.xcr2 &= ~XPHASE;
+ mcbsp_cfg.rcr2 &= ~RPHASE;
+
+ omap_mcbsp_config(id, &mcbsp_cfg);
+}
+
+
+/*
+ * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
+ * 730 has only 2 McBSP, and both of them are MPU peripherals.
+ */
+struct omap_mcbsp_info {
+ u32 virt_base;
+ u8 dma_rx_sync, dma_tx_sync;
+ u16 rx_irq, tx_irq;
+};
+
+#ifdef CONFIG_ARCH_OMAP730
+static const struct omap_mcbsp_info mcbsp_730[] = {
+ [0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_730_McBSP1RX,
+ .tx_irq = INT_730_McBSP1TX },
+ [1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_730_McBSP2RX,
+ .tx_irq = INT_730_McBSP2TX },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1510
+static const struct omap_mcbsp_info mcbsp_1510[] = {
+ [0] = { .virt_base = OMAP1510_MCBSP1_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_McBSP1RX,
+ .tx_irq = INT_McBSP1TX },
+ [1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+ .rx_irq = INT_1510_SPI_RX,
+ .tx_irq = INT_1510_SPI_TX },
+ [2] = { .virt_base = OMAP1510_MCBSP3_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_McBSP3RX,
+ .tx_irq = INT_McBSP3TX },
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static const struct omap_mcbsp_info mcbsp_1610[] = {
+ [0] = { .virt_base = OMAP1610_MCBSP1_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP1_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP1_TX,
+ .rx_irq = INT_McBSP1RX,
+ .tx_irq = INT_McBSP1TX },
+ [1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE),
+ .dma_rx_sync = OMAP_DMA_MCBSP2_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP2_TX,
+ .rx_irq = INT_1610_McBSP2_RX,
+ .tx_irq = INT_1610_McBSP2_TX },
+ [2] = { .virt_base = OMAP1610_MCBSP3_BASE,
+ .dma_rx_sync = OMAP_DMA_MCBSP3_RX,
+ .dma_tx_sync = OMAP_DMA_MCBSP3_TX,
+ .rx_irq = INT_McBSP3RX,
+ .tx_irq = INT_McBSP3TX },
+};
+#endif
+
+static int __init omap_mcbsp_init(void)
+{
+ int mcbsp_count = 0, i;
+ static const struct omap_mcbsp_info *mcbsp_info;
+
+ printk("Initializing OMAP McBSP system\n");
+
+ mcbsp_dsp_ck = clk_get(0, "dsp_ck");
+ if (IS_ERR(mcbsp_dsp_ck)) {
+ printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n");
+ return PTR_ERR(mcbsp_dsp_ck);
+ }
+ mcbsp_api_ck = clk_get(0, "api_ck");
+ if (IS_ERR(mcbsp_dsp_ck)) {
+ printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
+ return PTR_ERR(mcbsp_api_ck);
+ }
+
+#ifdef CONFIG_ARCH_OMAP730
+ if (cpu_is_omap730()) {
+ mcbsp_info = mcbsp_730;
+ mcbsp_count = ARRAY_SIZE(mcbsp_730);
+ }
+#endif
+#ifdef CONFIG_ARCH_OMAP1510
+ if (cpu_is_omap1510()) {
+ mcbsp_info = mcbsp_1510;
+ mcbsp_count = ARRAY_SIZE(mcbsp_1510);
+ }
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+ if (cpu_is_omap1610() || cpu_is_omap1710()) {
+ mcbsp_info = mcbsp_1610;
+ mcbsp_count = ARRAY_SIZE(mcbsp_1610);
+ }
+#endif
+ for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) {
+ if (i >= mcbsp_count) {
+ mcbsp[i].io_base = 0;
+ mcbsp[i].free = 0;
+ continue;
+ }
+ mcbsp[i].id = i + 1;
+ mcbsp[i].free = 1;
+ mcbsp[i].dma_tx_lch = -1;
+ mcbsp[i].dma_rx_lch = -1;
+
+ mcbsp[i].io_base = mcbsp_info[i].virt_base;
+ mcbsp[i].tx_irq = mcbsp_info[i].tx_irq;
+ mcbsp[i].rx_irq = mcbsp_info[i].rx_irq;
+ mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync;
+ mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync;
+ spin_lock_init(&mcbsp[i].lock);
+ }
+
+ return 0;
+}
+
+
+arch_initcall(omap_mcbsp_init);
+
+EXPORT_SYMBOL(omap_mcbsp_config);
+EXPORT_SYMBOL(omap_mcbsp_request);
+EXPORT_SYMBOL(omap_mcbsp_free);
+EXPORT_SYMBOL(omap_mcbsp_start);
+EXPORT_SYMBOL(omap_mcbsp_stop);
+EXPORT_SYMBOL(omap_mcbsp_xmit_word);
+EXPORT_SYMBOL(omap_mcbsp_recv_word);
+EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
+EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
+EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);