usb: dwc3: trace: purge dwc3_trace()
Finally get rid of dwc3_trace() hack. If any other
message is truly needed, we should add proper
tracepoints for them instead of hacking around with
dwc3_trace() or similar.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 15b62a5..2b22ea7 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -49,10 +49,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
int ret;
dep = dwc->eps[epnum];
- if (dep->flags & DWC3_EP_BUSY) {
- dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
+ if (dep->flags & DWC3_EP_BUSY)
return 0;
- }
trb = &dwc->ep0_trb[dep->trb_enqueue];
@@ -144,9 +142,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
if (dwc->ep0state == EP0_STATUS_PHASE)
__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
- else
- dwc3_trace(trace_dwc3_ep0,
- "too early for delayed status");
return 0;
}
@@ -210,9 +205,8 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
spin_lock_irqsave(&dwc->lock, flags);
if (!dep->endpoint.desc) {
- dwc3_trace(trace_dwc3_ep0,
- "trying to queue request %p to disabled %s",
- request, dep->name);
+ dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
+ dep->name);
ret = -ESHUTDOWN;
goto out;
}
@@ -574,13 +568,12 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
addr = le16_to_cpu(ctrl->wValue);
if (addr > 127) {
- dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr);
+ dev_err(dwc->dev, "invalid device address %d\n", addr);
return -EINVAL;
}
if (state == USB_STATE_CONFIGURED) {
- dwc3_trace(trace_dwc3_ep0,
- "trying to set address when configured");
+ dev_err(dwc->dev, "can't SetAddress() from Configured State\n");
return -EINVAL;
}
@@ -765,35 +758,27 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
switch (ctrl->bRequest) {
case USB_REQ_GET_STATUS:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS");
ret = dwc3_ep0_handle_status(dwc, ctrl);
break;
case USB_REQ_CLEAR_FEATURE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE");
ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
break;
case USB_REQ_SET_FEATURE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE");
ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
break;
case USB_REQ_SET_ADDRESS:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS");
ret = dwc3_ep0_set_address(dwc, ctrl);
break;
case USB_REQ_SET_CONFIGURATION:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION");
ret = dwc3_ep0_set_config(dwc, ctrl);
break;
case USB_REQ_SET_SEL:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL");
ret = dwc3_ep0_set_sel(dwc, ctrl);
break;
case USB_REQ_SET_ISOCH_DELAY:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
default:
- dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
break;
}
@@ -869,9 +854,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (status == DWC3_TRBSTS_SETUP_PENDING) {
dwc->setup_packet_pending = true;
-
- dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
-
if (r)
dwc3_gadget_giveback(ep0, r, -ECONNRESET);
@@ -961,7 +943,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
if (ret < 0) {
- dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d",
+ dev_err(dwc->dev, "invalid test #%d\n",
dwc->test_mode_nr);
dwc3_ep0_stall_and_restart(dwc);
return;
@@ -969,10 +951,8 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
}
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
- if (status == DWC3_TRBSTS_SETUP_PENDING) {
+ if (status == DWC3_TRBSTS_SETUP_PENDING)
dwc->setup_packet_pending = true;
- dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
- }
dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
@@ -1022,10 +1002,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
- if (ret) {
- dwc3_trace(trace_dwc3_ep0, "failed to map request");
+ if (ret)
return;
- }
maxpacket = dep->endpoint.maxpacket;
@@ -1050,10 +1028,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
} else {
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
- if (ret) {
- dwc3_trace(trace_dwc3_ep0, "failed to map request");
+ if (ret)
return;
- }
ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
req->request.length, DWC3_TRBCTL_CONTROL_DATA,
@@ -1123,8 +1099,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
if (dwc->ep0_expect_in != event->endpoint_number) {
struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
- dwc3_trace(trace_dwc3_ep0,
- "Wrong direction for Data phase");
+ dev_err(dwc->dev, "unexpected direction for Data Phase\n");
dwc3_ep0_end_control_data(dwc, dep);
dwc3_ep0_stall_and_restart(dwc);
return;
@@ -1140,7 +1115,6 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
if (dwc->delayed_status) {
WARN_ON_ONCE(event->endpoint_number != 1);
- dwc3_trace(trace_dwc3_ep0, "Delayed Status");
return;
}