i40e: get pf_id from HW rather than PCI function
Getting the pf_id from the function number was a good place to start,
but when the PF was setup in passthru mode, the PCI bus/device/function
was virtualized and the number in the VM is different from the number in
the bare metal. This caused HW configuration issues when the wrong pf_id
was used to set up the HMC and other structures. The PF_FUNC_RID register
has the real bus/device/function information as configured by the BIOS,
so use that for a better number. This works in NPAR mode as well.
Change-ID: I65e3dd6c97594890c2bad566b83cc670b1dae534
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Greg Rose <gregory.v.rose@intel.com>
Acked-by: Kevin Scott <kevin.c.scott@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index ec63bcb..3d741ee 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -550,7 +550,7 @@
i40e_status i40e_init_shared_code(struct i40e_hw *hw)
{
i40e_status status = 0;
- u32 reg;
+ u32 port, ari, func_rid;
i40e_set_mac_type(hw);
@@ -563,18 +563,17 @@
hw->phy.get_link_info = true;
- /* Determine port number */
- reg = rd32(hw, I40E_PFGEN_PORTNUM);
- reg = ((reg & I40E_PFGEN_PORTNUM_PORT_NUM_MASK) >>
- I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT);
- hw->port = (u8)reg;
-
- /* Determine the PF number based on the PCI fn */
- reg = rd32(hw, I40E_GLPCI_CAPSUP);
- if (reg & I40E_GLPCI_CAPSUP_ARI_EN_MASK)
- hw->pf_id = (u8)((hw->bus.device << 3) | hw->bus.func);
+ /* Determine port number and PF number*/
+ port = (rd32(hw, I40E_PFGEN_PORTNUM) & I40E_PFGEN_PORTNUM_PORT_NUM_MASK)
+ >> I40E_PFGEN_PORTNUM_PORT_NUM_SHIFT;
+ hw->port = (u8)port;
+ ari = (rd32(hw, I40E_GLPCI_CAPSUP) & I40E_GLPCI_CAPSUP_ARI_EN_MASK) >>
+ I40E_GLPCI_CAPSUP_ARI_EN_SHIFT;
+ func_rid = rd32(hw, I40E_PF_FUNC_RID);
+ if (ari)
+ hw->pf_id = (u8)(func_rid & 0xff);
else
- hw->pf_id = (u8)hw->bus.func;
+ hw->pf_id = (u8)(func_rid & 0x7);
status = i40e_init_nvm(hw);
return status;