| /* |
| * Copyright © 2008-2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eric Anholt <eric@anholt.net> |
| * |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_vma_manager.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_vgpu.h" |
| #include "i915_trace.h" |
| #include "intel_drv.h" |
| #include <linux/shmem_fs.h> |
| #include <linux/slab.h> |
| #include <linux/swap.h> |
| #include <linux/pci.h> |
| #include <linux/dma-buf.h> |
| |
| #define RQ_BUG_ON(expr) |
| |
| static void i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj); |
| static void i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj); |
| static void |
| i915_gem_object_retire__write(struct drm_i915_gem_object *obj); |
| static void |
| i915_gem_object_retire__read(struct drm_i915_gem_object *obj, int ring); |
| |
| static bool cpu_cache_is_coherent(struct drm_device *dev, |
| enum i915_cache_level level) |
| { |
| return HAS_LLC(dev) || level != I915_CACHE_NONE; |
| } |
| |
| static bool cpu_write_needs_clflush(struct drm_i915_gem_object *obj) |
| { |
| if (!cpu_cache_is_coherent(obj->base.dev, obj->cache_level)) |
| return true; |
| |
| return obj->pin_display; |
| } |
| |
| /* some bookkeeping */ |
| static void i915_gem_info_add_obj(struct drm_i915_private *dev_priv, |
| size_t size) |
| { |
| spin_lock(&dev_priv->mm.object_stat_lock); |
| dev_priv->mm.object_count++; |
| dev_priv->mm.object_memory += size; |
| spin_unlock(&dev_priv->mm.object_stat_lock); |
| } |
| |
| static void i915_gem_info_remove_obj(struct drm_i915_private *dev_priv, |
| size_t size) |
| { |
| spin_lock(&dev_priv->mm.object_stat_lock); |
| dev_priv->mm.object_count--; |
| dev_priv->mm.object_memory -= size; |
| spin_unlock(&dev_priv->mm.object_stat_lock); |
| } |
| |
| static int |
| i915_gem_wait_for_error(struct i915_gpu_error *error) |
| { |
| int ret; |
| |
| #define EXIT_COND (!i915_reset_in_progress(error) || \ |
| i915_terminally_wedged(error)) |
| if (EXIT_COND) |
| return 0; |
| |
| /* |
| * Only wait 10 seconds for the gpu reset to complete to avoid hanging |
| * userspace. If it takes that long something really bad is going on and |
| * we should simply try to bail out and fail as gracefully as possible. |
| */ |
| ret = wait_event_interruptible_timeout(error->reset_queue, |
| EXIT_COND, |
| 10*HZ); |
| if (ret == 0) { |
| DRM_ERROR("Timed out waiting for the gpu reset to complete\n"); |
| return -EIO; |
| } else if (ret < 0) { |
| return ret; |
| } |
| #undef EXIT_COND |
| |
| return 0; |
| } |
| |
| int i915_mutex_lock_interruptible(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| ret = i915_gem_wait_for_error(&dev_priv->gpu_error); |
| if (ret) |
| return ret; |
| |
| ret = mutex_lock_interruptible(&dev->struct_mutex); |
| if (ret) |
| return ret; |
| |
| WARN_ON(i915_verify_lists(dev)); |
| return 0; |
| } |
| |
| int |
| i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| struct drm_i915_gem_get_aperture *args = data; |
| struct i915_vma *vma; |
| size_t pinned; |
| |
| pinned = 0; |
| mutex_lock(&dev->struct_mutex); |
| list_for_each_entry(vma, &ggtt->base.active_list, vm_link) |
| if (vma->pin_count) |
| pinned += vma->node.size; |
| list_for_each_entry(vma, &ggtt->base.inactive_list, vm_link) |
| if (vma->pin_count) |
| pinned += vma->node.size; |
| mutex_unlock(&dev->struct_mutex); |
| |
| args->aper_size = ggtt->base.total; |
| args->aper_available_size = args->aper_size - pinned; |
| |
| return 0; |
| } |
| |
| static int |
| i915_gem_object_get_pages_phys(struct drm_i915_gem_object *obj) |
| { |
| struct address_space *mapping = file_inode(obj->base.filp)->i_mapping; |
| char *vaddr = obj->phys_handle->vaddr; |
| struct sg_table *st; |
| struct scatterlist *sg; |
| int i; |
| |
| if (WARN_ON(i915_gem_object_needs_bit17_swizzle(obj))) |
| return -EINVAL; |
| |
| for (i = 0; i < obj->base.size / PAGE_SIZE; i++) { |
| struct page *page; |
| char *src; |
| |
| page = shmem_read_mapping_page(mapping, i); |
| if (IS_ERR(page)) |
| return PTR_ERR(page); |
| |
| src = kmap_atomic(page); |
| memcpy(vaddr, src, PAGE_SIZE); |
| drm_clflush_virt_range(vaddr, PAGE_SIZE); |
| kunmap_atomic(src); |
| |
| put_page(page); |
| vaddr += PAGE_SIZE; |
| } |
| |
| i915_gem_chipset_flush(obj->base.dev); |
| |
| st = kmalloc(sizeof(*st), GFP_KERNEL); |
| if (st == NULL) |
| return -ENOMEM; |
| |
| if (sg_alloc_table(st, 1, GFP_KERNEL)) { |
| kfree(st); |
| return -ENOMEM; |
| } |
| |
| sg = st->sgl; |
| sg->offset = 0; |
| sg->length = obj->base.size; |
| |
| sg_dma_address(sg) = obj->phys_handle->busaddr; |
| sg_dma_len(sg) = obj->base.size; |
| |
| obj->pages = st; |
| return 0; |
| } |
| |
| static void |
| i915_gem_object_put_pages_phys(struct drm_i915_gem_object *obj) |
| { |
| int ret; |
| |
| BUG_ON(obj->madv == __I915_MADV_PURGED); |
| |
| ret = i915_gem_object_set_to_cpu_domain(obj, true); |
| if (ret) { |
| /* In the event of a disaster, abandon all caches and |
| * hope for the best. |
| */ |
| WARN_ON(ret != -EIO); |
| obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU; |
| } |
| |
| if (obj->madv == I915_MADV_DONTNEED) |
| obj->dirty = 0; |
| |
| if (obj->dirty) { |
| struct address_space *mapping = file_inode(obj->base.filp)->i_mapping; |
| char *vaddr = obj->phys_handle->vaddr; |
| int i; |
| |
| for (i = 0; i < obj->base.size / PAGE_SIZE; i++) { |
| struct page *page; |
| char *dst; |
| |
| page = shmem_read_mapping_page(mapping, i); |
| if (IS_ERR(page)) |
| continue; |
| |
| dst = kmap_atomic(page); |
| drm_clflush_virt_range(vaddr, PAGE_SIZE); |
| memcpy(dst, vaddr, PAGE_SIZE); |
| kunmap_atomic(dst); |
| |
| set_page_dirty(page); |
| if (obj->madv == I915_MADV_WILLNEED) |
| mark_page_accessed(page); |
| put_page(page); |
| vaddr += PAGE_SIZE; |
| } |
| obj->dirty = 0; |
| } |
| |
| sg_free_table(obj->pages); |
| kfree(obj->pages); |
| } |
| |
| static void |
| i915_gem_object_release_phys(struct drm_i915_gem_object *obj) |
| { |
| drm_pci_free(obj->base.dev, obj->phys_handle); |
| } |
| |
| static const struct drm_i915_gem_object_ops i915_gem_phys_ops = { |
| .get_pages = i915_gem_object_get_pages_phys, |
| .put_pages = i915_gem_object_put_pages_phys, |
| .release = i915_gem_object_release_phys, |
| }; |
| |
| static int |
| drop_pages(struct drm_i915_gem_object *obj) |
| { |
| struct i915_vma *vma, *next; |
| int ret; |
| |
| drm_gem_object_reference(&obj->base); |
| list_for_each_entry_safe(vma, next, &obj->vma_list, obj_link) |
| if (i915_vma_unbind(vma)) |
| break; |
| |
| ret = i915_gem_object_put_pages(obj); |
| drm_gem_object_unreference(&obj->base); |
| |
| return ret; |
| } |
| |
| int |
| i915_gem_object_attach_phys(struct drm_i915_gem_object *obj, |
| int align) |
| { |
| drm_dma_handle_t *phys; |
| int ret; |
| |
| if (obj->phys_handle) { |
| if ((unsigned long)obj->phys_handle->vaddr & (align -1)) |
| return -EBUSY; |
| |
| return 0; |
| } |
| |
| if (obj->madv != I915_MADV_WILLNEED) |
| return -EFAULT; |
| |
| if (obj->base.filp == NULL) |
| return -EINVAL; |
| |
| ret = drop_pages(obj); |
| if (ret) |
| return ret; |
| |
| /* create a new object */ |
| phys = drm_pci_alloc(obj->base.dev, obj->base.size, align); |
| if (!phys) |
| return -ENOMEM; |
| |
| obj->phys_handle = phys; |
| obj->ops = &i915_gem_phys_ops; |
| |
| return i915_gem_object_get_pages(obj); |
| } |
| |
| static int |
| i915_gem_phys_pwrite(struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file_priv) |
| { |
| struct drm_device *dev = obj->base.dev; |
| void *vaddr = obj->phys_handle->vaddr + args->offset; |
| char __user *user_data = to_user_ptr(args->data_ptr); |
| int ret = 0; |
| |
| /* We manually control the domain here and pretend that it |
| * remains coherent i.e. in the GTT domain, like shmem_pwrite. |
| */ |
| ret = i915_gem_object_wait_rendering(obj, false); |
| if (ret) |
| return ret; |
| |
| intel_fb_obj_invalidate(obj, ORIGIN_CPU); |
| if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) { |
| unsigned long unwritten; |
| |
| /* The physical object once assigned is fixed for the lifetime |
| * of the obj, so we can safely drop the lock and continue |
| * to access vaddr. |
| */ |
| mutex_unlock(&dev->struct_mutex); |
| unwritten = copy_from_user(vaddr, user_data, args->size); |
| mutex_lock(&dev->struct_mutex); |
| if (unwritten) { |
| ret = -EFAULT; |
| goto out; |
| } |
| } |
| |
| drm_clflush_virt_range(vaddr, args->size); |
| i915_gem_chipset_flush(dev); |
| |
| out: |
| intel_fb_obj_flush(obj, false, ORIGIN_CPU); |
| return ret; |
| } |
| |
| void *i915_gem_object_alloc(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| return kmem_cache_zalloc(dev_priv->objects, GFP_KERNEL); |
| } |
| |
| void i915_gem_object_free(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| kmem_cache_free(dev_priv->objects, obj); |
| } |
| |
| static int |
| i915_gem_create(struct drm_file *file, |
| struct drm_device *dev, |
| uint64_t size, |
| uint32_t *handle_p) |
| { |
| struct drm_i915_gem_object *obj; |
| int ret; |
| u32 handle; |
| |
| size = roundup(size, PAGE_SIZE); |
| if (size == 0) |
| return -EINVAL; |
| |
| /* Allocate the new object */ |
| obj = i915_gem_alloc_object(dev, size); |
| if (obj == NULL) |
| return -ENOMEM; |
| |
| ret = drm_gem_handle_create(file, &obj->base, &handle); |
| /* drop reference from allocate - handle holds it now */ |
| drm_gem_object_unreference_unlocked(&obj->base); |
| if (ret) |
| return ret; |
| |
| *handle_p = handle; |
| return 0; |
| } |
| |
| int |
| i915_gem_dumb_create(struct drm_file *file, |
| struct drm_device *dev, |
| struct drm_mode_create_dumb *args) |
| { |
| /* have to work out size/pitch and return them */ |
| args->pitch = ALIGN(args->width * DIV_ROUND_UP(args->bpp, 8), 64); |
| args->size = args->pitch * args->height; |
| return i915_gem_create(file, dev, |
| args->size, &args->handle); |
| } |
| |
| /** |
| * Creates a new mm object and returns a handle to it. |
| */ |
| int |
| i915_gem_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_create *args = data; |
| |
| return i915_gem_create(file, dev, |
| args->size, &args->handle); |
| } |
| |
| static inline int |
| __copy_to_user_swizzled(char __user *cpu_vaddr, |
| const char *gpu_vaddr, int gpu_offset, |
| int length) |
| { |
| int ret, cpu_offset = 0; |
| |
| while (length > 0) { |
| int cacheline_end = ALIGN(gpu_offset + 1, 64); |
| int this_length = min(cacheline_end - gpu_offset, length); |
| int swizzled_gpu_offset = gpu_offset ^ 64; |
| |
| ret = __copy_to_user(cpu_vaddr + cpu_offset, |
| gpu_vaddr + swizzled_gpu_offset, |
| this_length); |
| if (ret) |
| return ret + length; |
| |
| cpu_offset += this_length; |
| gpu_offset += this_length; |
| length -= this_length; |
| } |
| |
| return 0; |
| } |
| |
| static inline int |
| __copy_from_user_swizzled(char *gpu_vaddr, int gpu_offset, |
| const char __user *cpu_vaddr, |
| int length) |
| { |
| int ret, cpu_offset = 0; |
| |
| while (length > 0) { |
| int cacheline_end = ALIGN(gpu_offset + 1, 64); |
| int this_length = min(cacheline_end - gpu_offset, length); |
| int swizzled_gpu_offset = gpu_offset ^ 64; |
| |
| ret = __copy_from_user(gpu_vaddr + swizzled_gpu_offset, |
| cpu_vaddr + cpu_offset, |
| this_length); |
| if (ret) |
| return ret + length; |
| |
| cpu_offset += this_length; |
| gpu_offset += this_length; |
| length -= this_length; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Pins the specified object's pages and synchronizes the object with |
| * GPU accesses. Sets needs_clflush to non-zero if the caller should |
| * flush the object from the CPU cache. |
| */ |
| int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj, |
| int *needs_clflush) |
| { |
| int ret; |
| |
| *needs_clflush = 0; |
| |
| if (WARN_ON((obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE) == 0)) |
| return -EINVAL; |
| |
| if (!(obj->base.read_domains & I915_GEM_DOMAIN_CPU)) { |
| /* If we're not in the cpu read domain, set ourself into the gtt |
| * read domain and manually flush cachelines (if required). This |
| * optimizes for the case when the gpu will dirty the data |
| * anyway again before the next pread happens. */ |
| *needs_clflush = !cpu_cache_is_coherent(obj->base.dev, |
| obj->cache_level); |
| ret = i915_gem_object_wait_rendering(obj, true); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| return ret; |
| |
| i915_gem_object_pin_pages(obj); |
| |
| return ret; |
| } |
| |
| /* Per-page copy function for the shmem pread fastpath. |
| * Flushes invalid cachelines before reading the target if |
| * needs_clflush is set. */ |
| static int |
| shmem_pread_fast(struct page *page, int shmem_page_offset, int page_length, |
| char __user *user_data, |
| bool page_do_bit17_swizzling, bool needs_clflush) |
| { |
| char *vaddr; |
| int ret; |
| |
| if (unlikely(page_do_bit17_swizzling)) |
| return -EINVAL; |
| |
| vaddr = kmap_atomic(page); |
| if (needs_clflush) |
| drm_clflush_virt_range(vaddr + shmem_page_offset, |
| page_length); |
| ret = __copy_to_user_inatomic(user_data, |
| vaddr + shmem_page_offset, |
| page_length); |
| kunmap_atomic(vaddr); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| static void |
| shmem_clflush_swizzled_range(char *addr, unsigned long length, |
| bool swizzled) |
| { |
| if (unlikely(swizzled)) { |
| unsigned long start = (unsigned long) addr; |
| unsigned long end = (unsigned long) addr + length; |
| |
| /* For swizzling simply ensure that we always flush both |
| * channels. Lame, but simple and it works. Swizzled |
| * pwrite/pread is far from a hotpath - current userspace |
| * doesn't use it at all. */ |
| start = round_down(start, 128); |
| end = round_up(end, 128); |
| |
| drm_clflush_virt_range((void *)start, end - start); |
| } else { |
| drm_clflush_virt_range(addr, length); |
| } |
| |
| } |
| |
| /* Only difference to the fast-path function is that this can handle bit17 |
| * and uses non-atomic copy and kmap functions. */ |
| static int |
| shmem_pread_slow(struct page *page, int shmem_page_offset, int page_length, |
| char __user *user_data, |
| bool page_do_bit17_swizzling, bool needs_clflush) |
| { |
| char *vaddr; |
| int ret; |
| |
| vaddr = kmap(page); |
| if (needs_clflush) |
| shmem_clflush_swizzled_range(vaddr + shmem_page_offset, |
| page_length, |
| page_do_bit17_swizzling); |
| |
| if (page_do_bit17_swizzling) |
| ret = __copy_to_user_swizzled(user_data, |
| vaddr, shmem_page_offset, |
| page_length); |
| else |
| ret = __copy_to_user(user_data, |
| vaddr + shmem_page_offset, |
| page_length); |
| kunmap(page); |
| |
| return ret ? - EFAULT : 0; |
| } |
| |
| static int |
| i915_gem_shmem_pread(struct drm_device *dev, |
| struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_pread *args, |
| struct drm_file *file) |
| { |
| char __user *user_data; |
| ssize_t remain; |
| loff_t offset; |
| int shmem_page_offset, page_length, ret = 0; |
| int obj_do_bit17_swizzling, page_do_bit17_swizzling; |
| int prefaulted = 0; |
| int needs_clflush = 0; |
| struct sg_page_iter sg_iter; |
| |
| user_data = to_user_ptr(args->data_ptr); |
| remain = args->size; |
| |
| obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); |
| |
| ret = i915_gem_obj_prepare_shmem_read(obj, &needs_clflush); |
| if (ret) |
| return ret; |
| |
| offset = args->offset; |
| |
| for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, |
| offset >> PAGE_SHIFT) { |
| struct page *page = sg_page_iter_page(&sg_iter); |
| |
| if (remain <= 0) |
| break; |
| |
| /* Operation in this page |
| * |
| * shmem_page_offset = offset within page in shmem file |
| * page_length = bytes to copy for this page |
| */ |
| shmem_page_offset = offset_in_page(offset); |
| page_length = remain; |
| if ((shmem_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - shmem_page_offset; |
| |
| page_do_bit17_swizzling = obj_do_bit17_swizzling && |
| (page_to_phys(page) & (1 << 17)) != 0; |
| |
| ret = shmem_pread_fast(page, shmem_page_offset, page_length, |
| user_data, page_do_bit17_swizzling, |
| needs_clflush); |
| if (ret == 0) |
| goto next_page; |
| |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (likely(!i915.prefault_disable) && !prefaulted) { |
| ret = fault_in_multipages_writeable(user_data, remain); |
| /* Userspace is tricking us, but we've already clobbered |
| * its pages with the prefault and promised to write the |
| * data up to the first fault. Hence ignore any errors |
| * and just continue. */ |
| (void)ret; |
| prefaulted = 1; |
| } |
| |
| ret = shmem_pread_slow(page, shmem_page_offset, page_length, |
| user_data, page_do_bit17_swizzling, |
| needs_clflush); |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| if (ret) |
| goto out; |
| |
| next_page: |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| out: |
| i915_gem_object_unpin_pages(obj); |
| |
| return ret; |
| } |
| |
| /** |
| * Reads data from the object referenced by handle. |
| * |
| * On error, the contents of *data are undefined. |
| */ |
| int |
| i915_gem_pread_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_pread *args = data; |
| struct drm_i915_gem_object *obj; |
| int ret = 0; |
| |
| if (args->size == 0) |
| return 0; |
| |
| if (!access_ok(VERIFY_WRITE, |
| to_user_ptr(args->data_ptr), |
| args->size)) |
| return -EFAULT; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Bounds check source. */ |
| if (args->offset > obj->base.size || |
| args->size > obj->base.size - args->offset) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* prime objects have no backing filp to GEM pread/pwrite |
| * pages from. |
| */ |
| if (!obj->base.filp) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| trace_i915_gem_object_pread(obj, args->offset, args->size); |
| |
| ret = i915_gem_shmem_pread(dev, obj, args, file); |
| |
| out: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /* This is the fast write path which cannot handle |
| * page faults in the source data |
| */ |
| |
| static inline int |
| fast_user_write(struct io_mapping *mapping, |
| loff_t page_base, int page_offset, |
| char __user *user_data, |
| int length) |
| { |
| void __iomem *vaddr_atomic; |
| void *vaddr; |
| unsigned long unwritten; |
| |
| vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base); |
| /* We can use the cpu mem copy function because this is X86. */ |
| vaddr = (void __force*)vaddr_atomic + page_offset; |
| unwritten = __copy_from_user_inatomic_nocache(vaddr, |
| user_data, length); |
| io_mapping_unmap_atomic(vaddr_atomic); |
| return unwritten; |
| } |
| |
| /** |
| * This is the fast pwrite path, where we copy the data directly from the |
| * user into the GTT, uncached. |
| */ |
| static int |
| i915_gem_gtt_pwrite_fast(struct drm_device *dev, |
| struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| ssize_t remain; |
| loff_t offset, page_base; |
| char __user *user_data; |
| int page_offset, page_length, ret; |
| |
| ret = i915_gem_obj_ggtt_pin(obj, 0, PIN_MAPPABLE | PIN_NONBLOCK); |
| if (ret) |
| goto out; |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, true); |
| if (ret) |
| goto out_unpin; |
| |
| ret = i915_gem_object_put_fence(obj); |
| if (ret) |
| goto out_unpin; |
| |
| user_data = to_user_ptr(args->data_ptr); |
| remain = args->size; |
| |
| offset = i915_gem_obj_ggtt_offset(obj) + args->offset; |
| |
| intel_fb_obj_invalidate(obj, ORIGIN_GTT); |
| |
| while (remain > 0) { |
| /* Operation in this page |
| * |
| * page_base = page offset within aperture |
| * page_offset = offset within page |
| * page_length = bytes to copy for this page |
| */ |
| page_base = offset & PAGE_MASK; |
| page_offset = offset_in_page(offset); |
| page_length = remain; |
| if ((page_offset + remain) > PAGE_SIZE) |
| page_length = PAGE_SIZE - page_offset; |
| |
| /* If we get a fault while copying data, then (presumably) our |
| * source page isn't available. Return the error and we'll |
| * retry in the slow path. |
| */ |
| if (fast_user_write(ggtt->mappable, page_base, |
| page_offset, user_data, page_length)) { |
| ret = -EFAULT; |
| goto out_flush; |
| } |
| |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| out_flush: |
| intel_fb_obj_flush(obj, false, ORIGIN_GTT); |
| out_unpin: |
| i915_gem_object_ggtt_unpin(obj); |
| out: |
| return ret; |
| } |
| |
| /* Per-page copy function for the shmem pwrite fastpath. |
| * Flushes invalid cachelines before writing to the target if |
| * needs_clflush_before is set and flushes out any written cachelines after |
| * writing if needs_clflush is set. */ |
| static int |
| shmem_pwrite_fast(struct page *page, int shmem_page_offset, int page_length, |
| char __user *user_data, |
| bool page_do_bit17_swizzling, |
| bool needs_clflush_before, |
| bool needs_clflush_after) |
| { |
| char *vaddr; |
| int ret; |
| |
| if (unlikely(page_do_bit17_swizzling)) |
| return -EINVAL; |
| |
| vaddr = kmap_atomic(page); |
| if (needs_clflush_before) |
| drm_clflush_virt_range(vaddr + shmem_page_offset, |
| page_length); |
| ret = __copy_from_user_inatomic(vaddr + shmem_page_offset, |
| user_data, page_length); |
| if (needs_clflush_after) |
| drm_clflush_virt_range(vaddr + shmem_page_offset, |
| page_length); |
| kunmap_atomic(vaddr); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| /* Only difference to the fast-path function is that this can handle bit17 |
| * and uses non-atomic copy and kmap functions. */ |
| static int |
| shmem_pwrite_slow(struct page *page, int shmem_page_offset, int page_length, |
| char __user *user_data, |
| bool page_do_bit17_swizzling, |
| bool needs_clflush_before, |
| bool needs_clflush_after) |
| { |
| char *vaddr; |
| int ret; |
| |
| vaddr = kmap(page); |
| if (unlikely(needs_clflush_before || page_do_bit17_swizzling)) |
| shmem_clflush_swizzled_range(vaddr + shmem_page_offset, |
| page_length, |
| page_do_bit17_swizzling); |
| if (page_do_bit17_swizzling) |
| ret = __copy_from_user_swizzled(vaddr, shmem_page_offset, |
| user_data, |
| page_length); |
| else |
| ret = __copy_from_user(vaddr + shmem_page_offset, |
| user_data, |
| page_length); |
| if (needs_clflush_after) |
| shmem_clflush_swizzled_range(vaddr + shmem_page_offset, |
| page_length, |
| page_do_bit17_swizzling); |
| kunmap(page); |
| |
| return ret ? -EFAULT : 0; |
| } |
| |
| static int |
| i915_gem_shmem_pwrite(struct drm_device *dev, |
| struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_pwrite *args, |
| struct drm_file *file) |
| { |
| ssize_t remain; |
| loff_t offset; |
| char __user *user_data; |
| int shmem_page_offset, page_length, ret = 0; |
| int obj_do_bit17_swizzling, page_do_bit17_swizzling; |
| int hit_slowpath = 0; |
| int needs_clflush_after = 0; |
| int needs_clflush_before = 0; |
| struct sg_page_iter sg_iter; |
| |
| user_data = to_user_ptr(args->data_ptr); |
| remain = args->size; |
| |
| obj_do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj); |
| |
| if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) { |
| /* If we're not in the cpu write domain, set ourself into the gtt |
| * write domain and manually flush cachelines (if required). This |
| * optimizes for the case when the gpu will use the data |
| * right away and we therefore have to clflush anyway. */ |
| needs_clflush_after = cpu_write_needs_clflush(obj); |
| ret = i915_gem_object_wait_rendering(obj, false); |
| if (ret) |
| return ret; |
| } |
| /* Same trick applies to invalidate partially written cachelines read |
| * before writing. */ |
| if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) |
| needs_clflush_before = |
| !cpu_cache_is_coherent(dev, obj->cache_level); |
| |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| return ret; |
| |
| intel_fb_obj_invalidate(obj, ORIGIN_CPU); |
| |
| i915_gem_object_pin_pages(obj); |
| |
| offset = args->offset; |
| obj->dirty = 1; |
| |
| for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, |
| offset >> PAGE_SHIFT) { |
| struct page *page = sg_page_iter_page(&sg_iter); |
| int partial_cacheline_write; |
| |
| if (remain <= 0) |
| break; |
| |
| /* Operation in this page |
| * |
| * shmem_page_offset = offset within page in shmem file |
| * page_length = bytes to copy for this page |
| */ |
| shmem_page_offset = offset_in_page(offset); |
| |
| page_length = remain; |
| if ((shmem_page_offset + page_length) > PAGE_SIZE) |
| page_length = PAGE_SIZE - shmem_page_offset; |
| |
| /* If we don't overwrite a cacheline completely we need to be |
| * careful to have up-to-date data by first clflushing. Don't |
| * overcomplicate things and flush the entire patch. */ |
| partial_cacheline_write = needs_clflush_before && |
| ((shmem_page_offset | page_length) |
| & (boot_cpu_data.x86_clflush_size - 1)); |
| |
| page_do_bit17_swizzling = obj_do_bit17_swizzling && |
| (page_to_phys(page) & (1 << 17)) != 0; |
| |
| ret = shmem_pwrite_fast(page, shmem_page_offset, page_length, |
| user_data, page_do_bit17_swizzling, |
| partial_cacheline_write, |
| needs_clflush_after); |
| if (ret == 0) |
| goto next_page; |
| |
| hit_slowpath = 1; |
| mutex_unlock(&dev->struct_mutex); |
| ret = shmem_pwrite_slow(page, shmem_page_offset, page_length, |
| user_data, page_do_bit17_swizzling, |
| partial_cacheline_write, |
| needs_clflush_after); |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| if (ret) |
| goto out; |
| |
| next_page: |
| remain -= page_length; |
| user_data += page_length; |
| offset += page_length; |
| } |
| |
| out: |
| i915_gem_object_unpin_pages(obj); |
| |
| if (hit_slowpath) { |
| /* |
| * Fixup: Flush cpu caches in case we didn't flush the dirty |
| * cachelines in-line while writing and the object moved |
| * out of the cpu write domain while we've dropped the lock. |
| */ |
| if (!needs_clflush_after && |
| obj->base.write_domain != I915_GEM_DOMAIN_CPU) { |
| if (i915_gem_clflush_object(obj, obj->pin_display)) |
| needs_clflush_after = true; |
| } |
| } |
| |
| if (needs_clflush_after) |
| i915_gem_chipset_flush(dev); |
| else |
| obj->cache_dirty = true; |
| |
| intel_fb_obj_flush(obj, false, ORIGIN_CPU); |
| return ret; |
| } |
| |
| /** |
| * Writes data to the object referenced by handle. |
| * |
| * On error, the contents of the buffer that were to be modified are undefined. |
| */ |
| int |
| i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_pwrite *args = data; |
| struct drm_i915_gem_object *obj; |
| int ret; |
| |
| if (args->size == 0) |
| return 0; |
| |
| if (!access_ok(VERIFY_READ, |
| to_user_ptr(args->data_ptr), |
| args->size)) |
| return -EFAULT; |
| |
| if (likely(!i915.prefault_disable)) { |
| ret = fault_in_multipages_readable(to_user_ptr(args->data_ptr), |
| args->size); |
| if (ret) |
| return -EFAULT; |
| } |
| |
| intel_runtime_pm_get(dev_priv); |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| goto put_rpm; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Bounds check destination. */ |
| if (args->offset > obj->base.size || |
| args->size > obj->base.size - args->offset) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* prime objects have no backing filp to GEM pread/pwrite |
| * pages from. |
| */ |
| if (!obj->base.filp) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| trace_i915_gem_object_pwrite(obj, args->offset, args->size); |
| |
| ret = -EFAULT; |
| /* We can only do the GTT pwrite on untiled buffers, as otherwise |
| * it would end up going through the fenced access, and we'll get |
| * different detiling behavior between reading and writing. |
| * pread/pwrite currently are reading and writing from the CPU |
| * perspective, requiring manual detiling by the client. |
| */ |
| if (obj->tiling_mode == I915_TILING_NONE && |
| obj->base.write_domain != I915_GEM_DOMAIN_CPU && |
| cpu_write_needs_clflush(obj)) { |
| ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file); |
| /* Note that the gtt paths might fail with non-page-backed user |
| * pointers (e.g. gtt mappings when moving data between |
| * textures). Fallback to the shmem path in that case. */ |
| } |
| |
| if (ret == -EFAULT || ret == -ENOSPC) { |
| if (obj->phys_handle) |
| ret = i915_gem_phys_pwrite(obj, args, file); |
| else |
| ret = i915_gem_shmem_pwrite(dev, obj, args, file); |
| } |
| |
| out: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| put_rpm: |
| intel_runtime_pm_put(dev_priv); |
| |
| return ret; |
| } |
| |
| int |
| i915_gem_check_wedge(struct i915_gpu_error *error, |
| bool interruptible) |
| { |
| if (i915_reset_in_progress(error)) { |
| /* Non-interruptible callers can't handle -EAGAIN, hence return |
| * -EIO unconditionally for these. */ |
| if (!interruptible) |
| return -EIO; |
| |
| /* Recovery complete, but the reset failed ... */ |
| if (i915_terminally_wedged(error)) |
| return -EIO; |
| |
| /* |
| * Check if GPU Reset is in progress - we need intel_ring_begin |
| * to work properly to reinit the hw state while the gpu is |
| * still marked as reset-in-progress. Handle this with a flag. |
| */ |
| if (!error->reload_in_reset) |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| static void fake_irq(unsigned long data) |
| { |
| wake_up_process((struct task_struct *)data); |
| } |
| |
| static bool missed_irq(struct drm_i915_private *dev_priv, |
| struct intel_engine_cs *engine) |
| { |
| return test_bit(engine->id, &dev_priv->gpu_error.missed_irq_rings); |
| } |
| |
| static unsigned long local_clock_us(unsigned *cpu) |
| { |
| unsigned long t; |
| |
| /* Cheaply and approximately convert from nanoseconds to microseconds. |
| * The result and subsequent calculations are also defined in the same |
| * approximate microseconds units. The principal source of timing |
| * error here is from the simple truncation. |
| * |
| * Note that local_clock() is only defined wrt to the current CPU; |
| * the comparisons are no longer valid if we switch CPUs. Instead of |
| * blocking preemption for the entire busywait, we can detect the CPU |
| * switch and use that as indicator of system load and a reason to |
| * stop busywaiting, see busywait_stop(). |
| */ |
| *cpu = get_cpu(); |
| t = local_clock() >> 10; |
| put_cpu(); |
| |
| return t; |
| } |
| |
| static bool busywait_stop(unsigned long timeout, unsigned cpu) |
| { |
| unsigned this_cpu; |
| |
| if (time_after(local_clock_us(&this_cpu), timeout)) |
| return true; |
| |
| return this_cpu != cpu; |
| } |
| |
| static int __i915_spin_request(struct drm_i915_gem_request *req, int state) |
| { |
| unsigned long timeout; |
| unsigned cpu; |
| |
| /* When waiting for high frequency requests, e.g. during synchronous |
| * rendering split between the CPU and GPU, the finite amount of time |
| * required to set up the irq and wait upon it limits the response |
| * rate. By busywaiting on the request completion for a short while we |
| * can service the high frequency waits as quick as possible. However, |
| * if it is a slow request, we want to sleep as quickly as possible. |
| * The tradeoff between waiting and sleeping is roughly the time it |
| * takes to sleep on a request, on the order of a microsecond. |
| */ |
| |
| if (req->engine->irq_refcount) |
| return -EBUSY; |
| |
| /* Only spin if we know the GPU is processing this request */ |
| if (!i915_gem_request_started(req, true)) |
| return -EAGAIN; |
| |
| timeout = local_clock_us(&cpu) + 5; |
| while (!need_resched()) { |
| if (i915_gem_request_completed(req, true)) |
| return 0; |
| |
| if (signal_pending_state(state, current)) |
| break; |
| |
| if (busywait_stop(timeout, cpu)) |
| break; |
| |
| cpu_relax_lowlatency(); |
| } |
| |
| if (i915_gem_request_completed(req, false)) |
| return 0; |
| |
| return -EAGAIN; |
| } |
| |
| /** |
| * __i915_wait_request - wait until execution of request has finished |
| * @req: duh! |
| * @reset_counter: reset sequence associated with the given request |
| * @interruptible: do an interruptible wait (normally yes) |
| * @timeout: in - how long to wait (NULL forever); out - how much time remaining |
| * |
| * Note: It is of utmost importance that the passed in seqno and reset_counter |
| * values have been read by the caller in an smp safe manner. Where read-side |
| * locks are involved, it is sufficient to read the reset_counter before |
| * unlocking the lock that protects the seqno. For lockless tricks, the |
| * reset_counter _must_ be read before, and an appropriate smp_rmb must be |
| * inserted. |
| * |
| * Returns 0 if the request was found within the alloted time. Else returns the |
| * errno with remaining time filled in timeout argument. |
| */ |
| int __i915_wait_request(struct drm_i915_gem_request *req, |
| unsigned reset_counter, |
| bool interruptible, |
| s64 *timeout, |
| struct intel_rps_client *rps) |
| { |
| struct intel_engine_cs *engine = i915_gem_request_get_engine(req); |
| struct drm_device *dev = engine->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| const bool irq_test_in_progress = |
| ACCESS_ONCE(dev_priv->gpu_error.test_irq_rings) & intel_engine_flag(engine); |
| int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE; |
| DEFINE_WAIT(wait); |
| unsigned long timeout_expire; |
| s64 before = 0; /* Only to silence a compiler warning. */ |
| int ret; |
| |
| WARN(!intel_irqs_enabled(dev_priv), "IRQs disabled"); |
| |
| if (list_empty(&req->list)) |
| return 0; |
| |
| if (i915_gem_request_completed(req, true)) |
| return 0; |
| |
| timeout_expire = 0; |
| if (timeout) { |
| if (WARN_ON(*timeout < 0)) |
| return -EINVAL; |
| |
| if (*timeout == 0) |
| return -ETIME; |
| |
| timeout_expire = jiffies + nsecs_to_jiffies_timeout(*timeout); |
| |
| /* |
| * Record current time in case interrupted by signal, or wedged. |
| */ |
| before = ktime_get_raw_ns(); |
| } |
| |
| if (INTEL_INFO(dev_priv)->gen >= 6) |
| gen6_rps_boost(dev_priv, rps, req->emitted_jiffies); |
| |
| trace_i915_gem_request_wait_begin(req); |
| |
| /* Optimistic spin for the next jiffie before touching IRQs */ |
| ret = __i915_spin_request(req, state); |
| if (ret == 0) |
| goto out; |
| |
| if (!irq_test_in_progress && WARN_ON(!engine->irq_get(engine))) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| for (;;) { |
| struct timer_list timer; |
| |
| prepare_to_wait(&engine->irq_queue, &wait, state); |
| |
| /* We need to check whether any gpu reset happened in between |
| * the caller grabbing the seqno and now ... */ |
| if (reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter)) { |
| /* ... but upgrade the -EAGAIN to an -EIO if the gpu |
| * is truely gone. */ |
| ret = i915_gem_check_wedge(&dev_priv->gpu_error, interruptible); |
| if (ret == 0) |
| ret = -EAGAIN; |
| break; |
| } |
| |
| if (i915_gem_request_completed(req, false)) { |
| ret = 0; |
| break; |
| } |
| |
| if (signal_pending_state(state, current)) { |
| ret = -ERESTARTSYS; |
| break; |
| } |
| |
| if (timeout && time_after_eq(jiffies, timeout_expire)) { |
| ret = -ETIME; |
| break; |
| } |
| |
| timer.function = NULL; |
| if (timeout || missed_irq(dev_priv, engine)) { |
| unsigned long expire; |
| |
| setup_timer_on_stack(&timer, fake_irq, (unsigned long)current); |
| expire = missed_irq(dev_priv, engine) ? jiffies + 1 : timeout_expire; |
| mod_timer(&timer, expire); |
| } |
| |
| io_schedule(); |
| |
| if (timer.function) { |
| del_singleshot_timer_sync(&timer); |
| destroy_timer_on_stack(&timer); |
| } |
| } |
| if (!irq_test_in_progress) |
| engine->irq_put(engine); |
| |
| finish_wait(&engine->irq_queue, &wait); |
| |
| out: |
| trace_i915_gem_request_wait_end(req); |
| |
| if (timeout) { |
| s64 tres = *timeout - (ktime_get_raw_ns() - before); |
| |
| *timeout = tres < 0 ? 0 : tres; |
| |
| /* |
| * Apparently ktime isn't accurate enough and occasionally has a |
| * bit of mismatch in the jiffies<->nsecs<->ktime loop. So patch |
| * things up to make the test happy. We allow up to 1 jiffy. |
| * |
| * This is a regrssion from the timespec->ktime conversion. |
| */ |
| if (ret == -ETIME && *timeout < jiffies_to_usecs(1)*1000) |
| *timeout = 0; |
| } |
| |
| return ret; |
| } |
| |
| int i915_gem_request_add_to_client(struct drm_i915_gem_request *req, |
| struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv; |
| |
| WARN_ON(!req || !file || req->file_priv); |
| |
| if (!req || !file) |
| return -EINVAL; |
| |
| if (req->file_priv) |
| return -EINVAL; |
| |
| file_priv = file->driver_priv; |
| |
| spin_lock(&file_priv->mm.lock); |
| req->file_priv = file_priv; |
| list_add_tail(&req->client_list, &file_priv->mm.request_list); |
| spin_unlock(&file_priv->mm.lock); |
| |
| req->pid = get_pid(task_pid(current)); |
| |
| return 0; |
| } |
| |
| static inline void |
| i915_gem_request_remove_from_client(struct drm_i915_gem_request *request) |
| { |
| struct drm_i915_file_private *file_priv = request->file_priv; |
| |
| if (!file_priv) |
| return; |
| |
| spin_lock(&file_priv->mm.lock); |
| list_del(&request->client_list); |
| request->file_priv = NULL; |
| spin_unlock(&file_priv->mm.lock); |
| |
| put_pid(request->pid); |
| request->pid = NULL; |
| } |
| |
| static void i915_gem_request_retire(struct drm_i915_gem_request *request) |
| { |
| trace_i915_gem_request_retire(request); |
| |
| /* We know the GPU must have read the request to have |
| * sent us the seqno + interrupt, so use the position |
| * of tail of the request to update the last known position |
| * of the GPU head. |
| * |
| * Note this requires that we are always called in request |
| * completion order. |
| */ |
| request->ringbuf->last_retired_head = request->postfix; |
| |
| list_del_init(&request->list); |
| i915_gem_request_remove_from_client(request); |
| |
| i915_gem_request_unreference(request); |
| } |
| |
| static void |
| __i915_gem_request_retire__upto(struct drm_i915_gem_request *req) |
| { |
| struct intel_engine_cs *engine = req->engine; |
| struct drm_i915_gem_request *tmp; |
| |
| lockdep_assert_held(&engine->dev->struct_mutex); |
| |
| if (list_empty(&req->list)) |
| return; |
| |
| do { |
| tmp = list_first_entry(&engine->request_list, |
| typeof(*tmp), list); |
| |
| i915_gem_request_retire(tmp); |
| } while (tmp != req); |
| |
| WARN_ON(i915_verify_lists(engine->dev)); |
| } |
| |
| /** |
| * Waits for a request to be signaled, and cleans up the |
| * request and object lists appropriately for that event. |
| */ |
| int |
| i915_wait_request(struct drm_i915_gem_request *req) |
| { |
| struct drm_device *dev; |
| struct drm_i915_private *dev_priv; |
| bool interruptible; |
| int ret; |
| |
| BUG_ON(req == NULL); |
| |
| dev = req->engine->dev; |
| dev_priv = dev->dev_private; |
| interruptible = dev_priv->mm.interruptible; |
| |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| |
| ret = i915_gem_check_wedge(&dev_priv->gpu_error, interruptible); |
| if (ret) |
| return ret; |
| |
| ret = __i915_wait_request(req, |
| atomic_read(&dev_priv->gpu_error.reset_counter), |
| interruptible, NULL, NULL); |
| if (ret) |
| return ret; |
| |
| __i915_gem_request_retire__upto(req); |
| return 0; |
| } |
| |
| /** |
| * Ensures that all rendering to the object has completed and the object is |
| * safe to unbind from the GTT or access from the CPU. |
| */ |
| int |
| i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj, |
| bool readonly) |
| { |
| int ret, i; |
| |
| if (!obj->active) |
| return 0; |
| |
| if (readonly) { |
| if (obj->last_write_req != NULL) { |
| ret = i915_wait_request(obj->last_write_req); |
| if (ret) |
| return ret; |
| |
| i = obj->last_write_req->engine->id; |
| if (obj->last_read_req[i] == obj->last_write_req) |
| i915_gem_object_retire__read(obj, i); |
| else |
| i915_gem_object_retire__write(obj); |
| } |
| } else { |
| for (i = 0; i < I915_NUM_ENGINES; i++) { |
| if (obj->last_read_req[i] == NULL) |
| continue; |
| |
| ret = i915_wait_request(obj->last_read_req[i]); |
| if (ret) |
| return ret; |
| |
| i915_gem_object_retire__read(obj, i); |
| } |
| RQ_BUG_ON(obj->active); |
| } |
| |
| return 0; |
| } |
| |
| static void |
| i915_gem_object_retire_request(struct drm_i915_gem_object *obj, |
| struct drm_i915_gem_request *req) |
| { |
| int ring = req->engine->id; |
| |
| if (obj->last_read_req[ring] == req) |
| i915_gem_object_retire__read(obj, ring); |
| else if (obj->last_write_req == req) |
| i915_gem_object_retire__write(obj); |
| |
| __i915_gem_request_retire__upto(req); |
| } |
| |
| /* A nonblocking variant of the above wait. This is a highly dangerous routine |
| * as the object state may change during this call. |
| */ |
| static __must_check int |
| i915_gem_object_wait_rendering__nonblocking(struct drm_i915_gem_object *obj, |
| struct intel_rps_client *rps, |
| bool readonly) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_request *requests[I915_NUM_ENGINES]; |
| unsigned reset_counter; |
| int ret, i, n = 0; |
| |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| BUG_ON(!dev_priv->mm.interruptible); |
| |
| if (!obj->active) |
| return 0; |
| |
| ret = i915_gem_check_wedge(&dev_priv->gpu_error, true); |
| if (ret) |
| return ret; |
| |
| reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter); |
| |
| if (readonly) { |
| struct drm_i915_gem_request *req; |
| |
| req = obj->last_write_req; |
| if (req == NULL) |
| return 0; |
| |
| requests[n++] = i915_gem_request_reference(req); |
| } else { |
| for (i = 0; i < I915_NUM_ENGINES; i++) { |
| struct drm_i915_gem_request *req; |
| |
| req = obj->last_read_req[i]; |
| if (req == NULL) |
| continue; |
| |
| requests[n++] = i915_gem_request_reference(req); |
| } |
| } |
| |
| mutex_unlock(&dev->struct_mutex); |
| for (i = 0; ret == 0 && i < n; i++) |
| ret = __i915_wait_request(requests[i], reset_counter, true, |
| NULL, rps); |
| mutex_lock(&dev->struct_mutex); |
| |
| for (i = 0; i < n; i++) { |
| if (ret == 0) |
| i915_gem_object_retire_request(obj, requests[i]); |
| i915_gem_request_unreference(requests[i]); |
| } |
| |
| return ret; |
| } |
| |
| static struct intel_rps_client *to_rps_client(struct drm_file *file) |
| { |
| struct drm_i915_file_private *fpriv = file->driver_priv; |
| return &fpriv->rps; |
| } |
| |
| /** |
| * Called when user space prepares to use an object with the CPU, either |
| * through the mmap ioctl's mapping or a GTT mapping. |
| */ |
| int |
| i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_set_domain *args = data; |
| struct drm_i915_gem_object *obj; |
| uint32_t read_domains = args->read_domains; |
| uint32_t write_domain = args->write_domain; |
| int ret; |
| |
| /* Only handle setting domains to types used by the CPU. */ |
| if (write_domain & I915_GEM_GPU_DOMAINS) |
| return -EINVAL; |
| |
| if (read_domains & I915_GEM_GPU_DOMAINS) |
| return -EINVAL; |
| |
| /* Having something in the write domain implies it's in the read |
| * domain, and only that read domain. Enforce that in the request. |
| */ |
| if (write_domain != 0 && read_domains != write_domain) |
| return -EINVAL; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Try to flush the object off the GPU without holding the lock. |
| * We will repeat the flush holding the lock in the normal manner |
| * to catch cases where we are gazumped. |
| */ |
| ret = i915_gem_object_wait_rendering__nonblocking(obj, |
| to_rps_client(file), |
| !write_domain); |
| if (ret) |
| goto unref; |
| |
| if (read_domains & I915_GEM_DOMAIN_GTT) |
| ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); |
| else |
| ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); |
| |
| if (write_domain != 0) |
| intel_fb_obj_invalidate(obj, |
| write_domain == I915_GEM_DOMAIN_GTT ? |
| ORIGIN_GTT : ORIGIN_CPU); |
| |
| unref: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * Called when user space has done writes to this buffer |
| */ |
| int |
| i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_sw_finish *args = data; |
| struct drm_i915_gem_object *obj; |
| int ret = 0; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Pinned buffers may be scanout, so flush the cache */ |
| if (obj->pin_display) |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * Maps the contents of an object, returning the address it is mapped |
| * into. |
| * |
| * While the mapping holds a reference on the contents of the object, it doesn't |
| * imply a ref on the object itself. |
| * |
| * IMPORTANT: |
| * |
| * DRM driver writers who look a this function as an example for how to do GEM |
| * mmap support, please don't implement mmap support like here. The modern way |
| * to implement DRM mmap support is with an mmap offset ioctl (like |
| * i915_gem_mmap_gtt) and then using the mmap syscall on the DRM fd directly. |
| * That way debug tooling like valgrind will understand what's going on, hiding |
| * the mmap call in a driver private ioctl will break that. The i915 driver only |
| * does cpu mmaps this way because we didn't know better. |
| */ |
| int |
| i915_gem_mmap_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_mmap *args = data; |
| struct drm_gem_object *obj; |
| unsigned long addr; |
| |
| if (args->flags & ~(I915_MMAP_WC)) |
| return -EINVAL; |
| |
| if (args->flags & I915_MMAP_WC && !cpu_has_pat) |
| return -ENODEV; |
| |
| obj = drm_gem_object_lookup(dev, file, args->handle); |
| if (obj == NULL) |
| return -ENOENT; |
| |
| /* prime objects have no backing filp to GEM mmap |
| * pages from. |
| */ |
| if (!obj->filp) { |
| drm_gem_object_unreference_unlocked(obj); |
| return -EINVAL; |
| } |
| |
| addr = vm_mmap(obj->filp, 0, args->size, |
| PROT_READ | PROT_WRITE, MAP_SHARED, |
| args->offset); |
| if (args->flags & I915_MMAP_WC) { |
| struct mm_struct *mm = current->mm; |
| struct vm_area_struct *vma; |
| |
| down_write(&mm->mmap_sem); |
| vma = find_vma(mm, addr); |
| if (vma) |
| vma->vm_page_prot = |
| pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); |
| else |
| addr = -ENOMEM; |
| up_write(&mm->mmap_sem); |
| } |
| drm_gem_object_unreference_unlocked(obj); |
| if (IS_ERR((void *)addr)) |
| return addr; |
| |
| args->addr_ptr = (uint64_t) addr; |
| |
| return 0; |
| } |
| |
| /** |
| * i915_gem_fault - fault a page into the GTT |
| * @vma: VMA in question |
| * @vmf: fault info |
| * |
| * The fault handler is set up by drm_gem_mmap() when a object is GTT mapped |
| * from userspace. The fault handler takes care of binding the object to |
| * the GTT (if needed), allocating and programming a fence register (again, |
| * only if needed based on whether the old reg is still valid or the object |
| * is tiled) and inserting a new PTE into the faulting process. |
| * |
| * Note that the faulting process may involve evicting existing objects |
| * from the GTT and/or fence registers to make room. So performance may |
| * suffer if the GTT working set is large or there are few fence registers |
| * left. |
| */ |
| int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) |
| { |
| struct drm_i915_gem_object *obj = to_intel_bo(vma->vm_private_data); |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| struct i915_ggtt_view view = i915_ggtt_view_normal; |
| pgoff_t page_offset; |
| unsigned long pfn; |
| int ret = 0; |
| bool write = !!(vmf->flags & FAULT_FLAG_WRITE); |
| |
| intel_runtime_pm_get(dev_priv); |
| |
| /* We don't use vmf->pgoff since that has the fake offset */ |
| page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> |
| PAGE_SHIFT; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| goto out; |
| |
| trace_i915_gem_object_fault(obj, page_offset, true, write); |
| |
| /* Try to flush the object off the GPU first without holding the lock. |
| * Upon reacquiring the lock, we will perform our sanity checks and then |
| * repeat the flush holding the lock in the normal manner to catch cases |
| * where we are gazumped. |
| */ |
| ret = i915_gem_object_wait_rendering__nonblocking(obj, NULL, !write); |
| if (ret) |
| goto unlock; |
| |
| /* Access to snoopable pages through the GTT is incoherent. */ |
| if (obj->cache_level != I915_CACHE_NONE && !HAS_LLC(dev)) { |
| ret = -EFAULT; |
| goto unlock; |
| } |
| |
| /* Use a partial view if the object is bigger than the aperture. */ |
| if (obj->base.size >= ggtt->mappable_end && |
| obj->tiling_mode == I915_TILING_NONE) { |
| static const unsigned int chunk_size = 256; // 1 MiB |
| |
| memset(&view, 0, sizeof(view)); |
| view.type = I915_GGTT_VIEW_PARTIAL; |
| view.params.partial.offset = rounddown(page_offset, chunk_size); |
| view.params.partial.size = |
| min_t(unsigned int, |
| chunk_size, |
| (vma->vm_end - vma->vm_start)/PAGE_SIZE - |
| view.params.partial.offset); |
| } |
| |
| /* Now pin it into the GTT if needed */ |
| ret = i915_gem_object_ggtt_pin(obj, &view, 0, PIN_MAPPABLE); |
| if (ret) |
| goto unlock; |
| |
| ret = i915_gem_object_set_to_gtt_domain(obj, write); |
| if (ret) |
| goto unpin; |
| |
| ret = i915_gem_object_get_fence(obj); |
| if (ret) |
| goto unpin; |
| |
| /* Finally, remap it using the new GTT offset */ |
| pfn = ggtt->mappable_base + |
| i915_gem_obj_ggtt_offset_view(obj, &view); |
| pfn >>= PAGE_SHIFT; |
| |
| if (unlikely(view.type == I915_GGTT_VIEW_PARTIAL)) { |
| /* Overriding existing pages in partial view does not cause |
| * us any trouble as TLBs are still valid because the fault |
| * is due to userspace losing part of the mapping or never |
| * having accessed it before (at this partials' range). |
| */ |
| unsigned long base = vma->vm_start + |
| (view.params.partial.offset << PAGE_SHIFT); |
| unsigned int i; |
| |
| for (i = 0; i < view.params.partial.size; i++) { |
| ret = vm_insert_pfn(vma, base + i * PAGE_SIZE, pfn + i); |
| if (ret) |
| break; |
| } |
| |
| obj->fault_mappable = true; |
| } else { |
| if (!obj->fault_mappable) { |
| unsigned long size = min_t(unsigned long, |
| vma->vm_end - vma->vm_start, |
| obj->base.size); |
| int i; |
| |
| for (i = 0; i < size >> PAGE_SHIFT; i++) { |
| ret = vm_insert_pfn(vma, |
| (unsigned long)vma->vm_start + i * PAGE_SIZE, |
| pfn + i); |
| if (ret) |
| break; |
| } |
| |
| obj->fault_mappable = true; |
| } else |
| ret = vm_insert_pfn(vma, |
| (unsigned long)vmf->virtual_address, |
| pfn + page_offset); |
| } |
| unpin: |
| i915_gem_object_ggtt_unpin_view(obj, &view); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| out: |
| switch (ret) { |
| case -EIO: |
| /* |
| * We eat errors when the gpu is terminally wedged to avoid |
| * userspace unduly crashing (gl has no provisions for mmaps to |
| * fail). But any other -EIO isn't ours (e.g. swap in failure) |
| * and so needs to be reported. |
| */ |
| if (!i915_terminally_wedged(&dev_priv->gpu_error)) { |
| ret = VM_FAULT_SIGBUS; |
| break; |
| } |
| case -EAGAIN: |
| /* |
| * EAGAIN means the gpu is hung and we'll wait for the error |
| * handler to reset everything when re-faulting in |
| * i915_mutex_lock_interruptible. |
| */ |
| case 0: |
| case -ERESTARTSYS: |
| case -EINTR: |
| case -EBUSY: |
| /* |
| * EBUSY is ok: this just means that another thread |
| * already did the job. |
| */ |
| ret = VM_FAULT_NOPAGE; |
| break; |
| case -ENOMEM: |
| ret = VM_FAULT_OOM; |
| break; |
| case -ENOSPC: |
| case -EFAULT: |
| ret = VM_FAULT_SIGBUS; |
| break; |
| default: |
| WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret); |
| ret = VM_FAULT_SIGBUS; |
| break; |
| } |
| |
| intel_runtime_pm_put(dev_priv); |
| return ret; |
| } |
| |
| /** |
| * i915_gem_release_mmap - remove physical page mappings |
| * @obj: obj in question |
| * |
| * Preserve the reservation of the mmapping with the DRM core code, but |
| * relinquish ownership of the pages back to the system. |
| * |
| * It is vital that we remove the page mapping if we have mapped a tiled |
| * object through the GTT and then lose the fence register due to |
| * resource pressure. Similarly if the object has been moved out of the |
| * aperture, than pages mapped into userspace must be revoked. Removing the |
| * mapping will then trigger a page fault on the next user access, allowing |
| * fixup by i915_gem_fault(). |
| */ |
| void |
| i915_gem_release_mmap(struct drm_i915_gem_object *obj) |
| { |
| if (!obj->fault_mappable) |
| return; |
| |
| drm_vma_node_unmap(&obj->base.vma_node, |
| obj->base.dev->anon_inode->i_mapping); |
| obj->fault_mappable = false; |
| } |
| |
| void |
| i915_gem_release_all_mmaps(struct drm_i915_private *dev_priv) |
| { |
| struct drm_i915_gem_object *obj; |
| |
| list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) |
| i915_gem_release_mmap(obj); |
| } |
| |
| uint32_t |
| i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode) |
| { |
| uint32_t gtt_size; |
| |
| if (INTEL_INFO(dev)->gen >= 4 || |
| tiling_mode == I915_TILING_NONE) |
| return size; |
| |
| /* Previous chips need a power-of-two fence region when tiling */ |
| if (INTEL_INFO(dev)->gen == 3) |
| gtt_size = 1024*1024; |
| else |
| gtt_size = 512*1024; |
| |
| while (gtt_size < size) |
| gtt_size <<= 1; |
| |
| return gtt_size; |
| } |
| |
| /** |
| * i915_gem_get_gtt_alignment - return required GTT alignment for an object |
| * @obj: object to check |
| * |
| * Return the required GTT alignment for an object, taking into account |
| * potential fence register mapping. |
| */ |
| uint32_t |
| i915_gem_get_gtt_alignment(struct drm_device *dev, uint32_t size, |
| int tiling_mode, bool fenced) |
| { |
| /* |
| * Minimum alignment is 4k (GTT page size), but might be greater |
| * if a fence register is needed for the object. |
| */ |
| if (INTEL_INFO(dev)->gen >= 4 || (!fenced && IS_G33(dev)) || |
| tiling_mode == I915_TILING_NONE) |
| return 4096; |
| |
| /* |
| * Previous chips need to be aligned to the size of the smallest |
| * fence register that can contain the object. |
| */ |
| return i915_gem_get_gtt_size(dev, size, tiling_mode); |
| } |
| |
| static int i915_gem_object_create_mmap_offset(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| int ret; |
| |
| dev_priv->mm.shrinker_no_lock_stealing = true; |
| |
| ret = drm_gem_create_mmap_offset(&obj->base); |
| if (ret != -ENOSPC) |
| goto out; |
| |
| /* Badly fragmented mmap space? The only way we can recover |
| * space is by destroying unwanted objects. We can't randomly release |
| * mmap_offsets as userspace expects them to be persistent for the |
| * lifetime of the objects. The closest we can is to release the |
| * offsets on purgeable objects by truncating it and marking it purged, |
| * which prevents userspace from ever using that object again. |
| */ |
| i915_gem_shrink(dev_priv, |
| obj->base.size >> PAGE_SHIFT, |
| I915_SHRINK_BOUND | |
| I915_SHRINK_UNBOUND | |
| I915_SHRINK_PURGEABLE); |
| ret = drm_gem_create_mmap_offset(&obj->base); |
| if (ret != -ENOSPC) |
| goto out; |
| |
| i915_gem_shrink_all(dev_priv); |
| ret = drm_gem_create_mmap_offset(&obj->base); |
| out: |
| dev_priv->mm.shrinker_no_lock_stealing = false; |
| |
| return ret; |
| } |
| |
| static void i915_gem_object_free_mmap_offset(struct drm_i915_gem_object *obj) |
| { |
| drm_gem_free_mmap_offset(&obj->base); |
| } |
| |
| int |
| i915_gem_mmap_gtt(struct drm_file *file, |
| struct drm_device *dev, |
| uint32_t handle, |
| uint64_t *offset) |
| { |
| struct drm_i915_gem_object *obj; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| if (obj->madv != I915_MADV_WILLNEED) { |
| DRM_DEBUG("Attempting to mmap a purgeable buffer\n"); |
| ret = -EFAULT; |
| goto out; |
| } |
| |
| ret = i915_gem_object_create_mmap_offset(obj); |
| if (ret) |
| goto out; |
| |
| *offset = drm_vma_node_offset_addr(&obj->base.vma_node); |
| |
| out: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| /** |
| * i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing |
| * @dev: DRM device |
| * @data: GTT mapping ioctl data |
| * @file: GEM object info |
| * |
| * Simply returns the fake offset to userspace so it can mmap it. |
| * The mmap call will end up in drm_gem_mmap(), which will set things |
| * up so we can get faults in the handler above. |
| * |
| * The fault handler will take care of binding the object into the GTT |
| * (since it may have been evicted to make room for something), allocating |
| * a fence register, and mapping the appropriate aperture address into |
| * userspace. |
| */ |
| int |
| i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_mmap_gtt *args = data; |
| |
| return i915_gem_mmap_gtt(file, dev, args->handle, &args->offset); |
| } |
| |
| /* Immediately discard the backing storage */ |
| static void |
| i915_gem_object_truncate(struct drm_i915_gem_object *obj) |
| { |
| i915_gem_object_free_mmap_offset(obj); |
| |
| if (obj->base.filp == NULL) |
| return; |
| |
| /* Our goal here is to return as much of the memory as |
| * is possible back to the system as we are called from OOM. |
| * To do this we must instruct the shmfs to drop all of its |
| * backing pages, *now*. |
| */ |
| shmem_truncate_range(file_inode(obj->base.filp), 0, (loff_t)-1); |
| obj->madv = __I915_MADV_PURGED; |
| } |
| |
| /* Try to discard unwanted pages */ |
| static void |
| i915_gem_object_invalidate(struct drm_i915_gem_object *obj) |
| { |
| struct address_space *mapping; |
| |
| switch (obj->madv) { |
| case I915_MADV_DONTNEED: |
| i915_gem_object_truncate(obj); |
| case __I915_MADV_PURGED: |
| return; |
| } |
| |
| if (obj->base.filp == NULL) |
| return; |
| |
| mapping = file_inode(obj->base.filp)->i_mapping, |
| invalidate_mapping_pages(mapping, 0, (loff_t)-1); |
| } |
| |
| static void |
| i915_gem_object_put_pages_gtt(struct drm_i915_gem_object *obj) |
| { |
| struct sg_page_iter sg_iter; |
| int ret; |
| |
| BUG_ON(obj->madv == __I915_MADV_PURGED); |
| |
| ret = i915_gem_object_set_to_cpu_domain(obj, true); |
| if (ret) { |
| /* In the event of a disaster, abandon all caches and |
| * hope for the best. |
| */ |
| WARN_ON(ret != -EIO); |
| i915_gem_clflush_object(obj, true); |
| obj->base.read_domains = obj->base.write_domain = I915_GEM_DOMAIN_CPU; |
| } |
| |
| i915_gem_gtt_finish_object(obj); |
| |
| if (i915_gem_object_needs_bit17_swizzle(obj)) |
| i915_gem_object_save_bit_17_swizzle(obj); |
| |
| if (obj->madv == I915_MADV_DONTNEED) |
| obj->dirty = 0; |
| |
| for_each_sg_page(obj->pages->sgl, &sg_iter, obj->pages->nents, 0) { |
| struct page *page = sg_page_iter_page(&sg_iter); |
| |
| if (obj->dirty) |
| set_page_dirty(page); |
| |
| if (obj->madv == I915_MADV_WILLNEED) |
| mark_page_accessed(page); |
| |
| put_page(page); |
| } |
| obj->dirty = 0; |
| |
| sg_free_table(obj->pages); |
| kfree(obj->pages); |
| } |
| |
| int |
| i915_gem_object_put_pages(struct drm_i915_gem_object *obj) |
| { |
| const struct drm_i915_gem_object_ops *ops = obj->ops; |
| |
| if (obj->pages == NULL) |
| return 0; |
| |
| if (obj->pages_pin_count) |
| return -EBUSY; |
| |
| BUG_ON(i915_gem_obj_bound_any(obj)); |
| |
| /* ->put_pages might need to allocate memory for the bit17 swizzle |
| * array, hence protect them from being reaped by removing them from gtt |
| * lists early. */ |
| list_del(&obj->global_list); |
| |
| if (obj->mapping) { |
| if (is_vmalloc_addr(obj->mapping)) |
| vunmap(obj->mapping); |
| else |
| kunmap(kmap_to_page(obj->mapping)); |
| obj->mapping = NULL; |
| } |
| |
| ops->put_pages(obj); |
| obj->pages = NULL; |
| |
| i915_gem_object_invalidate(obj); |
| |
| return 0; |
| } |
| |
| static int |
| i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| int page_count, i; |
| struct address_space *mapping; |
| struct sg_table *st; |
| struct scatterlist *sg; |
| struct sg_page_iter sg_iter; |
| struct page *page; |
| unsigned long last_pfn = 0; /* suppress gcc warning */ |
| int ret; |
| gfp_t gfp; |
| |
| /* Assert that the object is not currently in any GPU domain. As it |
| * wasn't in the GTT, there shouldn't be any way it could have been in |
| * a GPU cache |
| */ |
| BUG_ON(obj->base.read_domains & I915_GEM_GPU_DOMAINS); |
| BUG_ON(obj->base.write_domain & I915_GEM_GPU_DOMAINS); |
| |
| st = kmalloc(sizeof(*st), GFP_KERNEL); |
| if (st == NULL) |
| return -ENOMEM; |
| |
| page_count = obj->base.size / PAGE_SIZE; |
| if (sg_alloc_table(st, page_count, GFP_KERNEL)) { |
| kfree(st); |
| return -ENOMEM; |
| } |
| |
| /* Get the list of pages out of our struct file. They'll be pinned |
| * at this point until we release them. |
| * |
| * Fail silently without starting the shrinker |
| */ |
| mapping = file_inode(obj->base.filp)->i_mapping; |
| gfp = mapping_gfp_constraint(mapping, ~(__GFP_IO | __GFP_RECLAIM)); |
| gfp |= __GFP_NORETRY | __GFP_NOWARN; |
| sg = st->sgl; |
| st->nents = 0; |
| for (i = 0; i < page_count; i++) { |
| page = shmem_read_mapping_page_gfp(mapping, i, gfp); |
| if (IS_ERR(page)) { |
| i915_gem_shrink(dev_priv, |
| page_count, |
| I915_SHRINK_BOUND | |
| I915_SHRINK_UNBOUND | |
| I915_SHRINK_PURGEABLE); |
| page = shmem_read_mapping_page_gfp(mapping, i, gfp); |
| } |
| if (IS_ERR(page)) { |
| /* We've tried hard to allocate the memory by reaping |
| * our own buffer, now let the real VM do its job and |
| * go down in flames if truly OOM. |
| */ |
| i915_gem_shrink_all(dev_priv); |
| page = shmem_read_mapping_page(mapping, i); |
| if (IS_ERR(page)) { |
| ret = PTR_ERR(page); |
| goto err_pages; |
| } |
| } |
| #ifdef CONFIG_SWIOTLB |
| if (swiotlb_nr_tbl()) { |
| st->nents++; |
| sg_set_page(sg, page, PAGE_SIZE, 0); |
| sg = sg_next(sg); |
| continue; |
| } |
| #endif |
| if (!i || page_to_pfn(page) != last_pfn + 1) { |
| if (i) |
| sg = sg_next(sg); |
| st->nents++; |
| sg_set_page(sg, page, PAGE_SIZE, 0); |
| } else { |
| sg->length += PAGE_SIZE; |
| } |
| last_pfn = page_to_pfn(page); |
| |
| /* Check that the i965g/gm workaround works. */ |
| WARN_ON((gfp & __GFP_DMA32) && (last_pfn >= 0x00100000UL)); |
| } |
| #ifdef CONFIG_SWIOTLB |
| if (!swiotlb_nr_tbl()) |
| #endif |
| sg_mark_end(sg); |
| obj->pages = st; |
| |
| ret = i915_gem_gtt_prepare_object(obj); |
| if (ret) |
| goto err_pages; |
| |
| if (i915_gem_object_needs_bit17_swizzle(obj)) |
| i915_gem_object_do_bit_17_swizzle(obj); |
| |
| if (obj->tiling_mode != I915_TILING_NONE && |
| dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES) |
| i915_gem_object_pin_pages(obj); |
| |
| return 0; |
| |
| err_pages: |
| sg_mark_end(sg); |
| for_each_sg_page(st->sgl, &sg_iter, st->nents, 0) |
| put_page(sg_page_iter_page(&sg_iter)); |
| sg_free_table(st); |
| kfree(st); |
| |
| /* shmemfs first checks if there is enough memory to allocate the page |
| * and reports ENOSPC should there be insufficient, along with the usual |
| * ENOMEM for a genuine allocation failure. |
| * |
| * We use ENOSPC in our driver to mean that we have run out of aperture |
| * space and so want to translate the error from shmemfs back to our |
| * usual understanding of ENOMEM. |
| */ |
| if (ret == -ENOSPC) |
| ret = -ENOMEM; |
| |
| return ret; |
| } |
| |
| /* Ensure that the associated pages are gathered from the backing storage |
| * and pinned into our object. i915_gem_object_get_pages() may be called |
| * multiple times before they are released by a single call to |
| * i915_gem_object_put_pages() - once the pages are no longer referenced |
| * either as a result of memory pressure (reaping pages under the shrinker) |
| * or as the object is itself released. |
| */ |
| int |
| i915_gem_object_get_pages(struct drm_i915_gem_object *obj) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| const struct drm_i915_gem_object_ops *ops = obj->ops; |
| int ret; |
| |
| if (obj->pages) |
| return 0; |
| |
| if (obj->madv != I915_MADV_WILLNEED) { |
| DRM_DEBUG("Attempting to obtain a purgeable object\n"); |
| return -EFAULT; |
| } |
| |
| BUG_ON(obj->pages_pin_count); |
| |
| ret = ops->get_pages(obj); |
| if (ret) |
| return ret; |
| |
| list_add_tail(&obj->global_list, &dev_priv->mm.unbound_list); |
| |
| obj->get_page.sg = obj->pages->sgl; |
| obj->get_page.last = 0; |
| |
| return 0; |
| } |
| |
| void *i915_gem_object_pin_map(struct drm_i915_gem_object *obj) |
| { |
| int ret; |
| |
| lockdep_assert_held(&obj->base.dev->struct_mutex); |
| |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| i915_gem_object_pin_pages(obj); |
| |
| if (obj->mapping == NULL) { |
| struct page **pages; |
| |
| pages = NULL; |
| if (obj->base.size == PAGE_SIZE) |
| obj->mapping = kmap(sg_page(obj->pages->sgl)); |
| else |
| pages = drm_malloc_gfp(obj->base.size >> PAGE_SHIFT, |
| sizeof(*pages), |
| GFP_TEMPORARY); |
| if (pages != NULL) { |
| struct sg_page_iter sg_iter; |
| int n; |
| |
| n = 0; |
| for_each_sg_page(obj->pages->sgl, &sg_iter, |
| obj->pages->nents, 0) |
| pages[n++] = sg_page_iter_page(&sg_iter); |
| |
| obj->mapping = vmap(pages, n, 0, PAGE_KERNEL); |
| drm_free_large(pages); |
| } |
| if (obj->mapping == NULL) { |
| i915_gem_object_unpin_pages(obj); |
| return ERR_PTR(-ENOMEM); |
| } |
| } |
| |
| return obj->mapping; |
| } |
| |
| void i915_vma_move_to_active(struct i915_vma *vma, |
| struct drm_i915_gem_request *req) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| struct intel_engine_cs *engine; |
| |
| engine = i915_gem_request_get_engine(req); |
| |
| /* Add a reference if we're newly entering the active list. */ |
| if (obj->active == 0) |
| drm_gem_object_reference(&obj->base); |
| obj->active |= intel_engine_flag(engine); |
| |
| list_move_tail(&obj->engine_list[engine->id], &engine->active_list); |
| i915_gem_request_assign(&obj->last_read_req[engine->id], req); |
| |
| list_move_tail(&vma->vm_link, &vma->vm->active_list); |
| } |
| |
| static void |
| i915_gem_object_retire__write(struct drm_i915_gem_object *obj) |
| { |
| RQ_BUG_ON(obj->last_write_req == NULL); |
| RQ_BUG_ON(!(obj->active & intel_engine_flag(obj->last_write_req->engine))); |
| |
| i915_gem_request_assign(&obj->last_write_req, NULL); |
| intel_fb_obj_flush(obj, true, ORIGIN_CS); |
| } |
| |
| static void |
| i915_gem_object_retire__read(struct drm_i915_gem_object *obj, int ring) |
| { |
| struct i915_vma *vma; |
| |
| RQ_BUG_ON(obj->last_read_req[ring] == NULL); |
| RQ_BUG_ON(!(obj->active & (1 << ring))); |
| |
| list_del_init(&obj->engine_list[ring]); |
| i915_gem_request_assign(&obj->last_read_req[ring], NULL); |
| |
| if (obj->last_write_req && obj->last_write_req->engine->id == ring) |
| i915_gem_object_retire__write(obj); |
| |
| obj->active &= ~(1 << ring); |
| if (obj->active) |
| return; |
| |
| /* Bump our place on the bound list to keep it roughly in LRU order |
| * so that we don't steal from recently used but inactive objects |
| * (unless we are forced to ofc!) |
| */ |
| list_move_tail(&obj->global_list, |
| &to_i915(obj->base.dev)->mm.bound_list); |
| |
| list_for_each_entry(vma, &obj->vma_list, obj_link) { |
| if (!list_empty(&vma->vm_link)) |
| list_move_tail(&vma->vm_link, &vma->vm->inactive_list); |
| } |
| |
| i915_gem_request_assign(&obj->last_fenced_req, NULL); |
| drm_gem_object_unreference(&obj->base); |
| } |
| |
| static int |
| i915_gem_init_seqno(struct drm_device *dev, u32 seqno) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| int ret; |
| |
| /* Carefully retire all requests without writing to the rings */ |
| for_each_engine(engine, dev_priv) { |
| ret = intel_engine_idle(engine); |
| if (ret) |
| return ret; |
| } |
| i915_gem_retire_requests(dev); |
| |
| /* Finally reset hw state */ |
| for_each_engine(engine, dev_priv) |
| intel_ring_init_seqno(engine, seqno); |
| |
| return 0; |
| } |
| |
| int i915_gem_set_seqno(struct drm_device *dev, u32 seqno) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (seqno == 0) |
| return -EINVAL; |
| |
| /* HWS page needs to be set less than what we |
| * will inject to ring |
| */ |
| ret = i915_gem_init_seqno(dev, seqno - 1); |
| if (ret) |
| return ret; |
| |
| /* Carefully set the last_seqno value so that wrap |
| * detection still works |
| */ |
| dev_priv->next_seqno = seqno; |
| dev_priv->last_seqno = seqno - 1; |
| if (dev_priv->last_seqno == 0) |
| dev_priv->last_seqno--; |
| |
| return 0; |
| } |
| |
| int |
| i915_gem_get_seqno(struct drm_device *dev, u32 *seqno) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* reserve 0 for non-seqno */ |
| if (dev_priv->next_seqno == 0) { |
| int ret = i915_gem_init_seqno(dev, 0); |
| if (ret) |
| return ret; |
| |
| dev_priv->next_seqno = 1; |
| } |
| |
| *seqno = dev_priv->last_seqno = dev_priv->next_seqno++; |
| return 0; |
| } |
| |
| /* |
| * NB: This function is not allowed to fail. Doing so would mean the the |
| * request is not being tracked for completion but the work itself is |
| * going to happen on the hardware. This would be a Bad Thing(tm). |
| */ |
| void __i915_add_request(struct drm_i915_gem_request *request, |
| struct drm_i915_gem_object *obj, |
| bool flush_caches) |
| { |
| struct intel_engine_cs *engine; |
| struct drm_i915_private *dev_priv; |
| struct intel_ringbuffer *ringbuf; |
| u32 request_start; |
| int ret; |
| |
| if (WARN_ON(request == NULL)) |
| return; |
| |
| engine = request->engine; |
| dev_priv = request->i915; |
| ringbuf = request->ringbuf; |
| |
| /* |
| * To ensure that this call will not fail, space for its emissions |
| * should already have been reserved in the ring buffer. Let the ring |
| * know that it is time to use that space up. |
| */ |
| intel_ring_reserved_space_use(ringbuf); |
| |
| request_start = intel_ring_get_tail(ringbuf); |
| /* |
| * Emit any outstanding flushes - execbuf can fail to emit the flush |
| * after having emitted the batchbuffer command. Hence we need to fix |
| * things up similar to emitting the lazy request. The difference here |
| * is that the flush _must_ happen before the next request, no matter |
| * what. |
| */ |
| if (flush_caches) { |
| if (i915.enable_execlists) |
| ret = logical_ring_flush_all_caches(request); |
| else |
| ret = intel_ring_flush_all_caches(request); |
| /* Not allowed to fail! */ |
| WARN(ret, "*_ring_flush_all_caches failed: %d!\n", ret); |
| } |
| |
| trace_i915_gem_request_add(request); |
| |
| request->head = request_start; |
| |
| /* Whilst this request exists, batch_obj will be on the |
| * active_list, and so will hold the active reference. Only when this |
| * request is retired will the the batch_obj be moved onto the |
| * inactive_list and lose its active reference. Hence we do not need |
| * to explicitly hold another reference here. |
| */ |
| request->batch_obj = obj; |
| |
| /* Seal the request and mark it as pending execution. Note that |
| * we may inspect this state, without holding any locks, during |
| * hangcheck. Hence we apply the barrier to ensure that we do not |
| * see a more recent value in the hws than we are tracking. |
| */ |
| request->emitted_jiffies = jiffies; |
| request->previous_seqno = engine->last_submitted_seqno; |
| smp_store_mb(engine->last_submitted_seqno, request->seqno); |
| list_add_tail(&request->list, &engine->request_list); |
| |
| /* Record the position of the start of the request so that |
| * should we detect the updated seqno part-way through the |
| * GPU processing the request, we never over-estimate the |
| * position of the head. |
| */ |
| request->postfix = intel_ring_get_tail(ringbuf); |
| |
| if (i915.enable_execlists) |
| ret = engine->emit_request(request); |
| else { |
| ret = engine->add_request(request); |
| |
| request->tail = intel_ring_get_tail(ringbuf); |
| } |
| /* Not allowed to fail! */ |
| WARN(ret, "emit|add_request failed: %d!\n", ret); |
| |
| i915_queue_hangcheck(engine->dev); |
| |
| queue_delayed_work(dev_priv->wq, |
| &dev_priv->mm.retire_work, |
| round_jiffies_up_relative(HZ)); |
| intel_mark_busy(dev_priv->dev); |
| |
| /* Sanity check that the reserved size was large enough. */ |
| intel_ring_reserved_space_end(ringbuf); |
| } |
| |
| static bool i915_context_is_banned(struct drm_i915_private *dev_priv, |
| const struct intel_context *ctx) |
| { |
| unsigned long elapsed; |
| |
| elapsed = get_seconds() - ctx->hang_stats.guilty_ts; |
| |
| if (ctx->hang_stats.banned) |
| return true; |
| |
| if (ctx->hang_stats.ban_period_seconds && |
| elapsed <= ctx->hang_stats.ban_period_seconds) { |
| if (!i915_gem_context_is_default(ctx)) { |
| DRM_DEBUG("context hanging too fast, banning!\n"); |
| return true; |
| } else if (i915_stop_ring_allow_ban(dev_priv)) { |
| if (i915_stop_ring_allow_warn(dev_priv)) |
| DRM_ERROR("gpu hanging too fast, banning!\n"); |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static void i915_set_reset_status(struct drm_i915_private *dev_priv, |
| struct intel_context *ctx, |
| const bool guilty) |
| { |
| struct i915_ctx_hang_stats *hs; |
| |
| if (WARN_ON(!ctx)) |
| return; |
| |
| hs = &ctx->hang_stats; |
| |
| if (guilty) { |
| hs->banned = i915_context_is_banned(dev_priv, ctx); |
| hs->batch_active++; |
| hs->guilty_ts = get_seconds(); |
| } else { |
| hs->batch_pending++; |
| } |
| } |
| |
| void i915_gem_request_free(struct kref *req_ref) |
| { |
| struct drm_i915_gem_request *req = container_of(req_ref, |
| typeof(*req), ref); |
| struct intel_context *ctx = req->ctx; |
| |
| if (req->file_priv) |
| i915_gem_request_remove_from_client(req); |
| |
| if (ctx) { |
| if (i915.enable_execlists && ctx != req->i915->kernel_context) |
| intel_lr_context_unpin(ctx, req->engine); |
| |
| i915_gem_context_unreference(ctx); |
| } |
| |
| kmem_cache_free(req->i915->requests, req); |
| } |
| |
| static inline int |
| __i915_gem_request_alloc(struct intel_engine_cs *engine, |
| struct intel_context *ctx, |
| struct drm_i915_gem_request **req_out) |
| { |
| struct drm_i915_private *dev_priv = to_i915(engine->dev); |
| struct drm_i915_gem_request *req; |
| int ret; |
| |
| if (!req_out) |
| return -EINVAL; |
| |
| *req_out = NULL; |
| |
| req = kmem_cache_zalloc(dev_priv->requests, GFP_KERNEL); |
| if (req == NULL) |
| return -ENOMEM; |
| |
| ret = i915_gem_get_seqno(engine->dev, &req->seqno); |
| if (ret) |
| goto err; |
| |
| kref_init(&req->ref); |
| req->i915 = dev_priv; |
| req->engine = engine; |
| req->ctx = ctx; |
| i915_gem_context_reference(req->ctx); |
| |
| if (i915.enable_execlists) |
| ret = intel_logical_ring_alloc_request_extras(req); |
| else |
| ret = intel_ring_alloc_request_extras(req); |
| if (ret) { |
| i915_gem_context_unreference(req->ctx); |
| goto err; |
| } |
| |
| /* |
| * Reserve space in the ring buffer for all the commands required to |
| * eventually emit this request. This is to guarantee that the |
| * i915_add_request() call can't fail. Note that the reserve may need |
| * to be redone if the request is not actually submitted straight |
| * away, e.g. because a GPU scheduler has deferred it. |
| */ |
| if (i915.enable_execlists) |
| ret = intel_logical_ring_reserve_space(req); |
| else |
| ret = intel_ring_reserve_space(req); |
| if (ret) { |
| /* |
| * At this point, the request is fully allocated even if not |
| * fully prepared. Thus it can be cleaned up using the proper |
| * free code. |
| */ |
| i915_gem_request_cancel(req); |
| return ret; |
| } |
| |
| *req_out = req; |
| return 0; |
| |
| err: |
| kmem_cache_free(dev_priv->requests, req); |
| return ret; |
| } |
| |
| /** |
| * i915_gem_request_alloc - allocate a request structure |
| * |
| * @engine: engine that we wish to issue the request on. |
| * @ctx: context that the request will be associated with. |
| * This can be NULL if the request is not directly related to |
| * any specific user context, in which case this function will |
| * choose an appropriate context to use. |
| * |
| * Returns a pointer to the allocated request if successful, |
| * or an error code if not. |
| */ |
| struct drm_i915_gem_request * |
| i915_gem_request_alloc(struct intel_engine_cs *engine, |
| struct intel_context *ctx) |
| { |
| struct drm_i915_gem_request *req; |
| int err; |
| |
| if (ctx == NULL) |
| ctx = to_i915(engine->dev)->kernel_context; |
| err = __i915_gem_request_alloc(engine, ctx, &req); |
| return err ? ERR_PTR(err) : req; |
| } |
| |
| void i915_gem_request_cancel(struct drm_i915_gem_request *req) |
| { |
| intel_ring_reserved_space_cancel(req->ringbuf); |
| |
| i915_gem_request_unreference(req); |
| } |
| |
| struct drm_i915_gem_request * |
| i915_gem_find_active_request(struct intel_engine_cs *engine) |
| { |
| struct drm_i915_gem_request *request; |
| |
| list_for_each_entry(request, &engine->request_list, list) { |
| if (i915_gem_request_completed(request, false)) |
| continue; |
| |
| return request; |
| } |
| |
| return NULL; |
| } |
| |
| static void i915_gem_reset_engine_status(struct drm_i915_private *dev_priv, |
| struct intel_engine_cs *engine) |
| { |
| struct drm_i915_gem_request *request; |
| bool ring_hung; |
| |
| request = i915_gem_find_active_request(engine); |
| |
| if (request == NULL) |
| return; |
| |
| ring_hung = engine->hangcheck.score >= HANGCHECK_SCORE_RING_HUNG; |
| |
| i915_set_reset_status(dev_priv, request->ctx, ring_hung); |
| |
| list_for_each_entry_continue(request, &engine->request_list, list) |
| i915_set_reset_status(dev_priv, request->ctx, false); |
| } |
| |
| static void i915_gem_reset_engine_cleanup(struct drm_i915_private *dev_priv, |
| struct intel_engine_cs *engine) |
| { |
| struct intel_ringbuffer *buffer; |
| |
| while (!list_empty(&engine->active_list)) { |
| struct drm_i915_gem_object *obj; |
| |
| obj = list_first_entry(&engine->active_list, |
| struct drm_i915_gem_object, |
| engine_list[engine->id]); |
| |
| i915_gem_object_retire__read(obj, engine->id); |
| } |
| |
| /* |
| * Clear the execlists queue up before freeing the requests, as those |
| * are the ones that keep the context and ringbuffer backing objects |
| * pinned in place. |
| */ |
| |
| if (i915.enable_execlists) { |
| /* Ensure irq handler finishes or is cancelled. */ |
| tasklet_kill(&engine->irq_tasklet); |
| |
| spin_lock_bh(&engine->execlist_lock); |
| /* list_splice_tail_init checks for empty lists */ |
| list_splice_tail_init(&engine->execlist_queue, |
| &engine->execlist_retired_req_list); |
| spin_unlock_bh(&engine->execlist_lock); |
| |
| intel_execlists_retire_requests(engine); |
| } |
| |
| /* |
| * We must free the requests after all the corresponding objects have |
| * been moved off active lists. Which is the same order as the normal |
| * retire_requests function does. This is important if object hold |
| * implicit references on things like e.g. ppgtt address spaces through |
| * the request. |
| */ |
| while (!list_empty(&engine->request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&engine->request_list, |
| struct drm_i915_gem_request, |
| list); |
| |
| i915_gem_request_retire(request); |
| } |
| |
| /* Having flushed all requests from all queues, we know that all |
| * ringbuffers must now be empty. However, since we do not reclaim |
| * all space when retiring the request (to prevent HEADs colliding |
| * with rapid ringbuffer wraparound) the amount of available space |
| * upon reset is less than when we start. Do one more pass over |
| * all the ringbuffers to reset last_retired_head. |
| */ |
| list_for_each_entry(buffer, &engine->buffers, link) { |
| buffer->last_retired_head = buffer->tail; |
| intel_ring_update_space(buffer); |
| } |
| |
| intel_ring_init_seqno(engine, engine->last_submitted_seqno); |
| } |
| |
| void i915_gem_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| |
| /* |
| * Before we free the objects from the requests, we need to inspect |
| * them for finding the guilty party. As the requests only borrow |
| * their reference to the objects, the inspection must be done first. |
| */ |
| for_each_engine(engine, dev_priv) |
| i915_gem_reset_engine_status(dev_priv, engine); |
| |
| for_each_engine(engine, dev_priv) |
| i915_gem_reset_engine_cleanup(dev_priv, engine); |
| |
| i915_gem_context_reset(dev); |
| |
| i915_gem_restore_fences(dev); |
| |
| WARN_ON(i915_verify_lists(dev)); |
| } |
| |
| /** |
| * This function clears the request list as sequence numbers are passed. |
| */ |
| void |
| i915_gem_retire_requests_ring(struct intel_engine_cs *engine) |
| { |
| WARN_ON(i915_verify_lists(engine->dev)); |
| |
| /* Retire requests first as we use it above for the early return. |
| * If we retire requests last, we may use a later seqno and so clear |
| * the requests lists without clearing the active list, leading to |
| * confusion. |
| */ |
| while (!list_empty(&engine->request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&engine->request_list, |
| struct drm_i915_gem_request, |
| list); |
| |
| if (!i915_gem_request_completed(request, true)) |
| break; |
| |
| i915_gem_request_retire(request); |
| } |
| |
| /* Move any buffers on the active list that are no longer referenced |
| * by the ringbuffer to the flushing/inactive lists as appropriate, |
| * before we free the context associated with the requests. |
| */ |
| while (!list_empty(&engine->active_list)) { |
| struct drm_i915_gem_object *obj; |
| |
| obj = list_first_entry(&engine->active_list, |
| struct drm_i915_gem_object, |
| engine_list[engine->id]); |
| |
| if (!list_empty(&obj->last_read_req[engine->id]->list)) |
| break; |
| |
| i915_gem_object_retire__read(obj, engine->id); |
| } |
| |
| if (unlikely(engine->trace_irq_req && |
| i915_gem_request_completed(engine->trace_irq_req, true))) { |
| engine->irq_put(engine); |
| i915_gem_request_assign(&engine->trace_irq_req, NULL); |
| } |
| |
| WARN_ON(i915_verify_lists(engine->dev)); |
| } |
| |
| bool |
| i915_gem_retire_requests(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| bool idle = true; |
| |
| for_each_engine(engine, dev_priv) { |
| i915_gem_retire_requests_ring(engine); |
| idle &= list_empty(&engine->request_list); |
| if (i915.enable_execlists) { |
| spin_lock_bh(&engine->execlist_lock); |
| idle &= list_empty(&engine->execlist_queue); |
| spin_unlock_bh(&engine->execlist_lock); |
| |
| intel_execlists_retire_requests(engine); |
| } |
| } |
| |
| if (idle) |
| mod_delayed_work(dev_priv->wq, |
| &dev_priv->mm.idle_work, |
| msecs_to_jiffies(100)); |
| |
| return idle; |
| } |
| |
| static void |
| i915_gem_retire_work_handler(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), mm.retire_work.work); |
| struct drm_device *dev = dev_priv->dev; |
| bool idle; |
| |
| /* Come back later if the device is busy... */ |
| idle = false; |
| if (mutex_trylock(&dev->struct_mutex)) { |
| idle = i915_gem_retire_requests(dev); |
| mutex_unlock(&dev->struct_mutex); |
| } |
| if (!idle) |
| queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, |
| round_jiffies_up_relative(HZ)); |
| } |
| |
| static void |
| i915_gem_idle_work_handler(struct work_struct *work) |
| { |
| struct drm_i915_private *dev_priv = |
| container_of(work, typeof(*dev_priv), mm.idle_work.work); |
| struct drm_device *dev = dev_priv->dev; |
| struct intel_engine_cs *engine; |
| |
| for_each_engine(engine, dev_priv) |
| if (!list_empty(&engine->request_list)) |
| return; |
| |
| /* we probably should sync with hangcheck here, using cancel_work_sync. |
| * Also locking seems to be fubar here, engine->request_list is protected |
| * by dev->struct_mutex. */ |
| |
| intel_mark_idle(dev); |
| |
| if (mutex_trylock(&dev->struct_mutex)) { |
| for_each_engine(engine, dev_priv) |
| i915_gem_batch_pool_fini(&engine->batch_pool); |
| |
| mutex_unlock(&dev->struct_mutex); |
| } |
| } |
| |
| /** |
| * Ensures that an object will eventually get non-busy by flushing any required |
| * write domains, emitting any outstanding lazy request and retiring and |
| * completed requests. |
| */ |
| static int |
| i915_gem_object_flush_active(struct drm_i915_gem_object *obj) |
| { |
| int i; |
| |
| if (!obj->active) |
| return 0; |
| |
| for (i = 0; i < I915_NUM_ENGINES; i++) { |
| struct drm_i915_gem_request *req; |
| |
| req = obj->last_read_req[i]; |
| if (req == NULL) |
| continue; |
| |
| if (list_empty(&req->list)) |
| goto retire; |
| |
| if (i915_gem_request_completed(req, true)) { |
| __i915_gem_request_retire__upto(req); |
| retire: |
| i915_gem_object_retire__read(obj, i); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * i915_gem_wait_ioctl - implements DRM_IOCTL_I915_GEM_WAIT |
| * @DRM_IOCTL_ARGS: standard ioctl arguments |
| * |
| * Returns 0 if successful, else an error is returned with the remaining time in |
| * the timeout parameter. |
| * -ETIME: object is still busy after timeout |
| * -ERESTARTSYS: signal interrupted the wait |
| * -ENONENT: object doesn't exist |
| * Also possible, but rare: |
| * -EAGAIN: GPU wedged |
| * -ENOMEM: damn |
| * -ENODEV: Internal IRQ fail |
| * -E?: The add request failed |
| * |
| * The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any |
| * non-zero timeout parameter the wait ioctl will wait for the given number of |
| * nanoseconds on an object becoming unbusy. Since the wait itself does so |
| * without holding struct_mutex the object may become re-busied before this |
| * function completes. A similar but shorter * race condition exists in the busy |
| * ioctl |
| */ |
| int |
| i915_gem_wait_ioctl(struct drm_device *dev, void *data, struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_wait *args = data; |
| struct drm_i915_gem_object *obj; |
| struct drm_i915_gem_request *req[I915_NUM_ENGINES]; |
| unsigned reset_counter; |
| int i, n = 0; |
| int ret; |
| |
| if (args->flags != 0) |
| return -EINVAL; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->bo_handle)); |
| if (&obj->base == NULL) { |
| mutex_unlock(&dev->struct_mutex); |
| return -ENOENT; |
| } |
| |
| /* Need to make sure the object gets inactive eventually. */ |
| ret = i915_gem_object_flush_active(obj); |
| if (ret) |
| goto out; |
| |
| if (!obj->active) |
| goto out; |
| |
| /* Do this after OLR check to make sure we make forward progress polling |
| * on this IOCTL with a timeout == 0 (like busy ioctl) |
| */ |
| if (args->timeout_ns == 0) { |
| ret = -ETIME; |
| goto out; |
| } |
| |
| drm_gem_object_unreference(&obj->base); |
| reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter); |
| |
| for (i = 0; i < I915_NUM_ENGINES; i++) { |
| if (obj->last_read_req[i] == NULL) |
| continue; |
| |
| req[n++] = i915_gem_request_reference(obj->last_read_req[i]); |
| } |
| |
| mutex_unlock(&dev->struct_mutex); |
| |
| for (i = 0; i < n; i++) { |
| if (ret == 0) |
| ret = __i915_wait_request(req[i], reset_counter, true, |
| args->timeout_ns > 0 ? &args->timeout_ns : NULL, |
| to_rps_client(file)); |
| i915_gem_request_unreference__unlocked(req[i]); |
| } |
| return ret; |
| |
| out: |
| drm_gem_object_unreference(&obj->base); |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| static int |
| __i915_gem_object_sync(struct drm_i915_gem_object *obj, |
| struct intel_engine_cs *to, |
| struct drm_i915_gem_request *from_req, |
| struct drm_i915_gem_request **to_req) |
| { |
| struct intel_engine_cs *from; |
| int ret; |
| |
| from = i915_gem_request_get_engine(from_req); |
| if (to == from) |
| return 0; |
| |
| if (i915_gem_request_completed(from_req, true)) |
| return 0; |
| |
| if (!i915_semaphore_is_enabled(obj->base.dev)) { |
| struct drm_i915_private *i915 = to_i915(obj->base.dev); |
| ret = __i915_wait_request(from_req, |
| atomic_read(&i915->gpu_error.reset_counter), |
| i915->mm.interruptible, |
| NULL, |
| &i915->rps.semaphores); |
| if (ret) |
| return ret; |
| |
| i915_gem_object_retire_request(obj, from_req); |
| } else { |
| int idx = intel_ring_sync_index(from, to); |
| u32 seqno = i915_gem_request_get_seqno(from_req); |
| |
| WARN_ON(!to_req); |
| |
| if (seqno <= from->semaphore.sync_seqno[idx]) |
| return 0; |
| |
| if (*to_req == NULL) { |
| struct drm_i915_gem_request *req; |
| |
| req = i915_gem_request_alloc(to, NULL); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| *to_req = req; |
| } |
| |
| trace_i915_gem_ring_sync_to(*to_req, from, from_req); |
| ret = to->semaphore.sync_to(*to_req, from, seqno); |
| if (ret) |
| return ret; |
| |
| /* We use last_read_req because sync_to() |
| * might have just caused seqno wrap under |
| * the radar. |
| */ |
| from->semaphore.sync_seqno[idx] = |
| i915_gem_request_get_seqno(obj->last_read_req[from->id]); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * i915_gem_object_sync - sync an object to a ring. |
| * |
| * @obj: object which may be in use on another ring. |
| * @to: ring we wish to use the object on. May be NULL. |
| * @to_req: request we wish to use the object for. See below. |
| * This will be allocated and returned if a request is |
| * required but not passed in. |
| * |
| * This code is meant to abstract object synchronization with the GPU. |
| * Calling with NULL implies synchronizing the object with the CPU |
| * rather than a particular GPU ring. Conceptually we serialise writes |
| * between engines inside the GPU. We only allow one engine to write |
| * into a buffer at any time, but multiple readers. To ensure each has |
| * a coherent view of memory, we must: |
| * |
| * - If there is an outstanding write request to the object, the new |
| * request must wait for it to complete (either CPU or in hw, requests |
| * on the same ring will be naturally ordered). |
| * |
| * - If we are a write request (pending_write_domain is set), the new |
| * request must wait for outstanding read requests to complete. |
| * |
| * For CPU synchronisation (NULL to) no request is required. For syncing with |
| * rings to_req must be non-NULL. However, a request does not have to be |
| * pre-allocated. If *to_req is NULL and sync commands will be emitted then a |
| * request will be allocated automatically and returned through *to_req. Note |
| * that it is not guaranteed that commands will be emitted (because the system |
| * might already be idle). Hence there is no need to create a request that |
| * might never have any work submitted. Note further that if a request is |
| * returned in *to_req, it is the responsibility of the caller to submit |
| * that request (after potentially adding more work to it). |
| * |
| * Returns 0 if successful, else propagates up the lower layer error. |
| */ |
| int |
| i915_gem_object_sync(struct drm_i915_gem_object *obj, |
| struct intel_engine_cs *to, |
| struct drm_i915_gem_request **to_req) |
| { |
| const bool readonly = obj->base.pending_write_domain == 0; |
| struct drm_i915_gem_request *req[I915_NUM_ENGINES]; |
| int ret, i, n; |
| |
| if (!obj->active) |
| return 0; |
| |
| if (to == NULL) |
| return i915_gem_object_wait_rendering(obj, readonly); |
| |
| n = 0; |
| if (readonly) { |
| if (obj->last_write_req) |
| req[n++] = obj->last_write_req; |
| } else { |
| for (i = 0; i < I915_NUM_ENGINES; i++) |
| if (obj->last_read_req[i]) |
| req[n++] = obj->last_read_req[i]; |
| } |
| for (i = 0; i < n; i++) { |
| ret = __i915_gem_object_sync(obj, to, req[i], to_req); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void i915_gem_object_finish_gtt(struct drm_i915_gem_object *obj) |
| { |
| u32 old_write_domain, old_read_domains; |
| |
| /* Force a pagefault for domain tracking on next user access */ |
| i915_gem_release_mmap(obj); |
| |
| if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0) |
| return; |
| |
| /* Wait for any direct GTT access to complete */ |
| mb(); |
| |
| old_read_domains = obj->base.read_domains; |
| old_write_domain = obj->base.write_domain; |
| |
| obj->base.read_domains &= ~I915_GEM_DOMAIN_GTT; |
| obj->base.write_domain &= ~I915_GEM_DOMAIN_GTT; |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| } |
| |
| static int __i915_vma_unbind(struct i915_vma *vma, bool wait) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| int ret; |
| |
| if (list_empty(&vma->obj_link)) |
| return 0; |
| |
| if (!drm_mm_node_allocated(&vma->node)) { |
| i915_gem_vma_destroy(vma); |
| return 0; |
| } |
| |
| if (vma->pin_count) |
| return -EBUSY; |
| |
| BUG_ON(obj->pages == NULL); |
| |
| if (wait) { |
| ret = i915_gem_object_wait_rendering(obj, false); |
| if (ret) |
| return ret; |
| } |
| |
| if (vma->is_ggtt && vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL) { |
| i915_gem_object_finish_gtt(obj); |
| |
| /* release the fence reg _after_ flushing */ |
| ret = i915_gem_object_put_fence(obj); |
| if (ret) |
| return ret; |
| } |
| |
| trace_i915_vma_unbind(vma); |
| |
| vma->vm->unbind_vma(vma); |
| vma->bound = 0; |
| |
| list_del_init(&vma->vm_link); |
| if (vma->is_ggtt) { |
| if (vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL) { |
| obj->map_and_fenceable = false; |
| } else if (vma->ggtt_view.pages) { |
| sg_free_table(vma->ggtt_view.pages); |
| kfree(vma->ggtt_view.pages); |
| } |
| vma->ggtt_view.pages = NULL; |
| } |
| |
| drm_mm_remove_node(&vma->node); |
| i915_gem_vma_destroy(vma); |
| |
| /* Since the unbound list is global, only move to that list if |
| * no more VMAs exist. */ |
| if (list_empty(&obj->vma_list)) |
| list_move_tail(&obj->global_list, &dev_priv->mm.unbound_list); |
| |
| /* And finally now the object is completely decoupled from this vma, |
| * we can drop its hold on the backing storage and allow it to be |
| * reaped by the shrinker. |
| */ |
| i915_gem_object_unpin_pages(obj); |
| |
| return 0; |
| } |
| |
| int i915_vma_unbind(struct i915_vma *vma) |
| { |
| return __i915_vma_unbind(vma, true); |
| } |
| |
| int __i915_vma_unbind_no_wait(struct i915_vma *vma) |
| { |
| return __i915_vma_unbind(vma, false); |
| } |
| |
| int i915_gpu_idle(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| int ret; |
| |
| /* Flush everything onto the inactive list. */ |
| for_each_engine(engine, dev_priv) { |
| if (!i915.enable_execlists) { |
| struct drm_i915_gem_request *req; |
| |
| req = i915_gem_request_alloc(engine, NULL); |
| if (IS_ERR(req)) |
| return PTR_ERR(req); |
| |
| ret = i915_switch_context(req); |
| if (ret) { |
| i915_gem_request_cancel(req); |
| return ret; |
| } |
| |
| i915_add_request_no_flush(req); |
| } |
| |
| ret = intel_engine_idle(engine); |
| if (ret) |
| return ret; |
| } |
| |
| WARN_ON(i915_verify_lists(dev)); |
| return 0; |
| } |
| |
| static bool i915_gem_valid_gtt_space(struct i915_vma *vma, |
| unsigned long cache_level) |
| { |
| struct drm_mm_node *gtt_space = &vma->node; |
| struct drm_mm_node *other; |
| |
| /* |
| * On some machines we have to be careful when putting differing types |
| * of snoopable memory together to avoid the prefetcher crossing memory |
| * domains and dying. During vm initialisation, we decide whether or not |
| * these constraints apply and set the drm_mm.color_adjust |
| * appropriately. |
| */ |
| if (vma->vm->mm.color_adjust == NULL) |
| return true; |
| |
| if (!drm_mm_node_allocated(gtt_space)) |
| return true; |
| |
| if (list_empty(>t_space->node_list)) |
| return true; |
| |
| other = list_entry(gtt_space->node_list.prev, struct drm_mm_node, node_list); |
| if (other->allocated && !other->hole_follows && other->color != cache_level) |
| return false; |
| |
| other = list_entry(gtt_space->node_list.next, struct drm_mm_node, node_list); |
| if (other->allocated && !gtt_space->hole_follows && other->color != cache_level) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * Finds free space in the GTT aperture and binds the object or a view of it |
| * there. |
| */ |
| static struct i915_vma * |
| i915_gem_object_bind_to_vm(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| const struct i915_ggtt_view *ggtt_view, |
| unsigned alignment, |
| uint64_t flags) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| u32 fence_alignment, unfenced_alignment; |
| u32 search_flag, alloc_flag; |
| u64 start, end; |
| u64 size, fence_size; |
| struct i915_vma *vma; |
| int ret; |
| |
| if (i915_is_ggtt(vm)) { |
| u32 view_size; |
| |
| if (WARN_ON(!ggtt_view)) |
| return ERR_PTR(-EINVAL); |
| |
| view_size = i915_ggtt_view_size(obj, ggtt_view); |
| |
| fence_size = i915_gem_get_gtt_size(dev, |
| view_size, |
| obj->tiling_mode); |
| fence_alignment = i915_gem_get_gtt_alignment(dev, |
| view_size, |
| obj->tiling_mode, |
| true); |
| unfenced_alignment = i915_gem_get_gtt_alignment(dev, |
| view_size, |
| obj->tiling_mode, |
| false); |
| size = flags & PIN_MAPPABLE ? fence_size : view_size; |
| } else { |
| fence_size = i915_gem_get_gtt_size(dev, |
| obj->base.size, |
| obj->tiling_mode); |
| fence_alignment = i915_gem_get_gtt_alignment(dev, |
| obj->base.size, |
| obj->tiling_mode, |
| true); |
| unfenced_alignment = |
| i915_gem_get_gtt_alignment(dev, |
| obj->base.size, |
| obj->tiling_mode, |
| false); |
| size = flags & PIN_MAPPABLE ? fence_size : obj->base.size; |
| } |
| |
| start = flags & PIN_OFFSET_BIAS ? flags & PIN_OFFSET_MASK : 0; |
| end = vm->total; |
| if (flags & PIN_MAPPABLE) |
| end = min_t(u64, end, ggtt->mappable_end); |
| if (flags & PIN_ZONE_4G) |
| end = min_t(u64, end, (1ULL << 32) - PAGE_SIZE); |
| |
| if (alignment == 0) |
| alignment = flags & PIN_MAPPABLE ? fence_alignment : |
| unfenced_alignment; |
| if (flags & PIN_MAPPABLE && alignment & (fence_alignment - 1)) { |
| DRM_DEBUG("Invalid object (view type=%u) alignment requested %u\n", |
| ggtt_view ? ggtt_view->type : 0, |
| alignment); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* If binding the object/GGTT view requires more space than the entire |
| * aperture has, reject it early before evicting everything in a vain |
| * attempt to find space. |
| */ |
| if (size > end) { |
| DRM_DEBUG("Attempting to bind an object (view type=%u) larger than the aperture: size=%llu > %s aperture=%llu\n", |
| ggtt_view ? ggtt_view->type : 0, |
| size, |
| flags & PIN_MAPPABLE ? "mappable" : "total", |
| end); |
| return ERR_PTR(-E2BIG); |
| } |
| |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| i915_gem_object_pin_pages(obj); |
| |
| vma = ggtt_view ? i915_gem_obj_lookup_or_create_ggtt_vma(obj, ggtt_view) : |
| i915_gem_obj_lookup_or_create_vma(obj, vm); |
| |
| if (IS_ERR(vma)) |
| goto err_unpin; |
| |
| if (flags & PIN_OFFSET_FIXED) { |
| uint64_t offset = flags & PIN_OFFSET_MASK; |
| |
| if (offset & (alignment - 1) || offset + size > end) { |
| ret = -EINVAL; |
| goto err_free_vma; |
| } |
| vma->node.start = offset; |
| vma->node.size = size; |
| vma->node.color = obj->cache_level; |
| ret = drm_mm_reserve_node(&vm->mm, &vma->node); |
| if (ret) { |
| ret = i915_gem_evict_for_vma(vma); |
| if (ret == 0) |
| ret = drm_mm_reserve_node(&vm->mm, &vma->node); |
| } |
| if (ret) |
| goto err_free_vma; |
| } else { |
| if (flags & PIN_HIGH) { |
| search_flag = DRM_MM_SEARCH_BELOW; |
| alloc_flag = DRM_MM_CREATE_TOP; |
| } else { |
| search_flag = DRM_MM_SEARCH_DEFAULT; |
| alloc_flag = DRM_MM_CREATE_DEFAULT; |
| } |
| |
| search_free: |
| ret = drm_mm_insert_node_in_range_generic(&vm->mm, &vma->node, |
| size, alignment, |
| obj->cache_level, |
| start, end, |
| search_flag, |
| alloc_flag); |
| if (ret) { |
| ret = i915_gem_evict_something(dev, vm, size, alignment, |
| obj->cache_level, |
| start, end, |
| flags); |
| if (ret == 0) |
| goto search_free; |
| |
| goto err_free_vma; |
| } |
| } |
| if (WARN_ON(!i915_gem_valid_gtt_space(vma, obj->cache_level))) { |
| ret = -EINVAL; |
| goto err_remove_node; |
| } |
| |
| trace_i915_vma_bind(vma, flags); |
| ret = i915_vma_bind(vma, obj->cache_level, flags); |
| if (ret) |
| goto err_remove_node; |
| |
| list_move_tail(&obj->global_list, &dev_priv->mm.bound_list); |
| list_add_tail(&vma->vm_link, &vm->inactive_list); |
| |
| return vma; |
| |
| err_remove_node: |
| drm_mm_remove_node(&vma->node); |
| err_free_vma: |
| i915_gem_vma_destroy(vma); |
| vma = ERR_PTR(ret); |
| err_unpin: |
| i915_gem_object_unpin_pages(obj); |
| return vma; |
| } |
| |
| bool |
| i915_gem_clflush_object(struct drm_i915_gem_object *obj, |
| bool force) |
| { |
| /* If we don't have a page list set up, then we're not pinned |
| * to GPU, and we can ignore the cache flush because it'll happen |
| * again at bind time. |
| */ |
| if (obj->pages == NULL) |
| return false; |
| |
| /* |
| * Stolen memory is always coherent with the GPU as it is explicitly |
| * marked as wc by the system, or the system is cache-coherent. |
| */ |
| if (obj->stolen || obj->phys_handle) |
| return false; |
| |
| /* If the GPU is snooping the contents of the CPU cache, |
| * we do not need to manually clear the CPU cache lines. However, |
| * the caches are only snooped when the render cache is |
| * flushed/invalidated. As we always have to emit invalidations |
| * and flushes when moving into and out of the RENDER domain, correct |
| * snooping behaviour occurs naturally as the result of our domain |
| * tracking. |
| */ |
| if (!force && cpu_cache_is_coherent(obj->base.dev, obj->cache_level)) { |
| obj->cache_dirty = true; |
| return false; |
| } |
| |
| trace_i915_gem_object_clflush(obj); |
| drm_clflush_sg(obj->pages); |
| obj->cache_dirty = false; |
| |
| return true; |
| } |
| |
| /** Flushes the GTT write domain for the object if it's dirty. */ |
| static void |
| i915_gem_object_flush_gtt_write_domain(struct drm_i915_gem_object *obj) |
| { |
| uint32_t old_write_domain; |
| |
| if (obj->base.write_domain != I915_GEM_DOMAIN_GTT) |
| return; |
| |
| /* No actual flushing is required for the GTT write domain. Writes |
| * to it immediately go to main memory as far as we know, so there's |
| * no chipset flush. It also doesn't land in render cache. |
| * |
| * However, we do have to enforce the order so that all writes through |
| * the GTT land before any writes to the device, such as updates to |
| * the GATT itself. |
| */ |
| wmb(); |
| |
| old_write_domain = obj->base.write_domain; |
| obj->base.write_domain = 0; |
| |
| intel_fb_obj_flush(obj, false, ORIGIN_GTT); |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->base.read_domains, |
| old_write_domain); |
| } |
| |
| /** Flushes the CPU write domain for the object if it's dirty. */ |
| static void |
| i915_gem_object_flush_cpu_write_domain(struct drm_i915_gem_object *obj) |
| { |
| uint32_t old_write_domain; |
| |
| if (obj->base.write_domain != I915_GEM_DOMAIN_CPU) |
| return; |
| |
| if (i915_gem_clflush_object(obj, obj->pin_display)) |
| i915_gem_chipset_flush(obj->base.dev); |
| |
| old_write_domain = obj->base.write_domain; |
| obj->base.write_domain = 0; |
| |
| intel_fb_obj_flush(obj, false, ORIGIN_CPU); |
| |
| trace_i915_gem_object_change_domain(obj, |
| obj->base.read_domains, |
| old_write_domain); |
| } |
| |
| /** |
| * Moves a single object to the GTT read, and possibly write domain. |
| * |
| * This function returns when the move is complete, including waiting on |
| * flushes to occur. |
| */ |
| int |
| i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj, bool write) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| uint32_t old_write_domain, old_read_domains; |
| struct i915_vma *vma; |
| int ret; |
| |
| if (obj->base.write_domain == I915_GEM_DOMAIN_GTT) |
| return 0; |
| |
| ret = i915_gem_object_wait_rendering(obj, !write); |
| if (ret) |
| return ret; |
| |
| /* Flush and acquire obj->pages so that we are coherent through |
| * direct access in memory with previous cached writes through |
| * shmemfs and that our cache domain tracking remains valid. |
| * For example, if the obj->filp was moved to swap without us |
| * being notified and releasing the pages, we would mistakenly |
| * continue to assume that the obj remained out of the CPU cached |
| * domain. |
| */ |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| return ret; |
| |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| /* Serialise direct access to this object with the barriers for |
| * coherent writes from the GPU, by effectively invalidating the |
| * GTT domain upon first access. |
| */ |
| if ((obj->base.read_domains & I915_GEM_DOMAIN_GTT) == 0) |
| mb(); |
| |
| old_write_domain = obj->base.write_domain; |
| old_read_domains = obj->base.read_domains; |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_GTT) != 0); |
| obj->base.read_domains |= I915_GEM_DOMAIN_GTT; |
| if (write) { |
| obj->base.read_domains = I915_GEM_DOMAIN_GTT; |
| obj->base.write_domain = I915_GEM_DOMAIN_GTT; |
| obj->dirty = 1; |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| |
| /* And bump the LRU for this access */ |
| vma = i915_gem_obj_to_ggtt(obj); |
| if (vma && drm_mm_node_allocated(&vma->node) && !obj->active) |
| list_move_tail(&vma->vm_link, |
| &ggtt->base.inactive_list); |
| |
| return 0; |
| } |
| |
| /** |
| * Changes the cache-level of an object across all VMA. |
| * |
| * After this function returns, the object will be in the new cache-level |
| * across all GTT and the contents of the backing storage will be coherent, |
| * with respect to the new cache-level. In order to keep the backing storage |
| * coherent for all users, we only allow a single cache level to be set |
| * globally on the object and prevent it from being changed whilst the |
| * hardware is reading from the object. That is if the object is currently |
| * on the scanout it will be set to uncached (or equivalent display |
| * cache coherency) and all non-MOCS GPU access will also be uncached so |
| * that all direct access to the scanout remains coherent. |
| */ |
| int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj, |
| enum i915_cache_level cache_level) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct i915_vma *vma, *next; |
| bool bound = false; |
| int ret = 0; |
| |
| if (obj->cache_level == cache_level) |
| goto out; |
| |
| /* Inspect the list of currently bound VMA and unbind any that would |
| * be invalid given the new cache-level. This is principally to |
| * catch the issue of the CS prefetch crossing page boundaries and |
| * reading an invalid PTE on older architectures. |
| */ |
| list_for_each_entry_safe(vma, next, &obj->vma_list, obj_link) { |
| if (!drm_mm_node_allocated(&vma->node)) |
| continue; |
| |
| if (vma->pin_count) { |
| DRM_DEBUG("can not change the cache level of pinned objects\n"); |
| return -EBUSY; |
| } |
| |
| if (!i915_gem_valid_gtt_space(vma, cache_level)) { |
| ret = i915_vma_unbind(vma); |
| if (ret) |
| return ret; |
| } else |
| bound = true; |
| } |
| |
| /* We can reuse the existing drm_mm nodes but need to change the |
| * cache-level on the PTE. We could simply unbind them all and |
| * rebind with the correct cache-level on next use. However since |
| * we already have a valid slot, dma mapping, pages etc, we may as |
| * rewrite the PTE in the belief that doing so tramples upon less |
| * state and so involves less work. |
| */ |
| if (bound) { |
| /* Before we change the PTE, the GPU must not be accessing it. |
| * If we wait upon the object, we know that all the bound |
| * VMA are no longer active. |
| */ |
| ret = i915_gem_object_wait_rendering(obj, false); |
| if (ret) |
| return ret; |
| |
| if (!HAS_LLC(dev) && cache_level != I915_CACHE_NONE) { |
| /* Access to snoopable pages through the GTT is |
| * incoherent and on some machines causes a hard |
| * lockup. Relinquish the CPU mmaping to force |
| * userspace to refault in the pages and we can |
| * then double check if the GTT mapping is still |
| * valid for that pointer access. |
| */ |
| i915_gem_release_mmap(obj); |
| |
| /* As we no longer need a fence for GTT access, |
| * we can relinquish it now (and so prevent having |
| * to steal a fence from someone else on the next |
| * fence request). Note GPU activity would have |
| * dropped the fence as all snoopable access is |
| * supposed to be linear. |
| */ |
| ret = i915_gem_object_put_fence(obj); |
| if (ret) |
| return ret; |
| } else { |
| /* We either have incoherent backing store and |
| * so no GTT access or the architecture is fully |
| * coherent. In such cases, existing GTT mmaps |
| * ignore the cache bit in the PTE and we can |
| * rewrite it without confusing the GPU or having |
| * to force userspace to fault back in its mmaps. |
| */ |
| } |
| |
| list_for_each_entry(vma, &obj->vma_list, obj_link) { |
| if (!drm_mm_node_allocated(&vma->node)) |
| continue; |
| |
| ret = i915_vma_bind(vma, cache_level, PIN_UPDATE); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| list_for_each_entry(vma, &obj->vma_list, obj_link) |
| vma->node.color = cache_level; |
| obj->cache_level = cache_level; |
| |
| out: |
| /* Flush the dirty CPU caches to the backing storage so that the |
| * object is now coherent at its new cache level (with respect |
| * to the access domain). |
| */ |
| if (obj->cache_dirty && |
| obj->base.write_domain != I915_GEM_DOMAIN_CPU && |
| cpu_write_needs_clflush(obj)) { |
| if (i915_gem_clflush_object(obj, true)) |
| i915_gem_chipset_flush(obj->base.dev); |
| } |
| |
| return 0; |
| } |
| |
| int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_caching *args = data; |
| struct drm_i915_gem_object *obj; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) |
| return -ENOENT; |
| |
| switch (obj->cache_level) { |
| case I915_CACHE_LLC: |
| case I915_CACHE_L3_LLC: |
| args->caching = I915_CACHING_CACHED; |
| break; |
| |
| case I915_CACHE_WT: |
| args->caching = I915_CACHING_DISPLAY; |
| break; |
| |
| default: |
| args->caching = I915_CACHING_NONE; |
| break; |
| } |
| |
| drm_gem_object_unreference_unlocked(&obj->base); |
| return 0; |
| } |
| |
| int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_caching *args = data; |
| struct drm_i915_gem_object *obj; |
| enum i915_cache_level level; |
| int ret; |
| |
| switch (args->caching) { |
| case I915_CACHING_NONE: |
| level = I915_CACHE_NONE; |
| break; |
| case I915_CACHING_CACHED: |
| /* |
| * Due to a HW issue on BXT A stepping, GPU stores via a |
| * snooped mapping may leave stale data in a corresponding CPU |
| * cacheline, whereas normally such cachelines would get |
| * invalidated. |
| */ |
| if (!HAS_LLC(dev) && !HAS_SNOOP(dev)) |
| return -ENODEV; |
| |
| level = I915_CACHE_LLC; |
| break; |
| case I915_CACHING_DISPLAY: |
| level = HAS_WT(dev) ? I915_CACHE_WT : I915_CACHE_NONE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| intel_runtime_pm_get(dev_priv); |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| goto rpm_put; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| ret = i915_gem_object_set_cache_level(obj, level); |
| |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| rpm_put: |
| intel_runtime_pm_put(dev_priv); |
| |
| return ret; |
| } |
| |
| /* |
| * Prepare buffer for display plane (scanout, cursors, etc). |
| * Can be called from an uninterruptible phase (modesetting) and allows |
| * any flushes to be pipelined (for pageflips). |
| */ |
| int |
| i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, |
| u32 alignment, |
| const struct i915_ggtt_view *view) |
| { |
| u32 old_read_domains, old_write_domain; |
| int ret; |
| |
| /* Mark the pin_display early so that we account for the |
| * display coherency whilst setting up the cache domains. |
| */ |
| obj->pin_display++; |
| |
| /* The display engine is not coherent with the LLC cache on gen6. As |
| * a result, we make sure that the pinning that is about to occur is |
| * done with uncached PTEs. This is lowest common denominator for all |
| * chipsets. |
| * |
| * However for gen6+, we could do better by using the GFDT bit instead |
| * of uncaching, which would allow us to flush all the LLC-cached data |
| * with that bit in the PTE to main memory with just one PIPE_CONTROL. |
| */ |
| ret = i915_gem_object_set_cache_level(obj, |
| HAS_WT(obj->base.dev) ? I915_CACHE_WT : I915_CACHE_NONE); |
| if (ret) |
| goto err_unpin_display; |
| |
| /* As the user may map the buffer once pinned in the display plane |
| * (e.g. libkms for the bootup splash), we have to ensure that we |
| * always use map_and_fenceable for all scanout buffers. |
| */ |
| ret = i915_gem_object_ggtt_pin(obj, view, alignment, |
| view->type == I915_GGTT_VIEW_NORMAL ? |
| PIN_MAPPABLE : 0); |
| if (ret) |
| goto err_unpin_display; |
| |
| i915_gem_object_flush_cpu_write_domain(obj); |
| |
| old_write_domain = obj->base.write_domain; |
| old_read_domains = obj->base.read_domains; |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| obj->base.write_domain = 0; |
| obj->base.read_domains |= I915_GEM_DOMAIN_GTT; |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| |
| return 0; |
| |
| err_unpin_display: |
| obj->pin_display--; |
| return ret; |
| } |
| |
| void |
| i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view) |
| { |
| if (WARN_ON(obj->pin_display == 0)) |
| return; |
| |
| i915_gem_object_ggtt_unpin_view(obj, view); |
| |
| obj->pin_display--; |
| } |
| |
| /** |
| * Moves a single object to the CPU read, and possibly write domain. |
| * |
| * This function returns when the move is complete, including waiting on |
| * flushes to occur. |
| */ |
| int |
| i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write) |
| { |
| uint32_t old_write_domain, old_read_domains; |
| int ret; |
| |
| if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) |
| return 0; |
| |
| ret = i915_gem_object_wait_rendering(obj, !write); |
| if (ret) |
| return ret; |
| |
| i915_gem_object_flush_gtt_write_domain(obj); |
| |
| old_write_domain = obj->base.write_domain; |
| old_read_domains = obj->base.read_domains; |
| |
| /* Flush the CPU cache if it's still invalid. */ |
| if ((obj->base.read_domains & I915_GEM_DOMAIN_CPU) == 0) { |
| i915_gem_clflush_object(obj, false); |
| |
| obj->base.read_domains |= I915_GEM_DOMAIN_CPU; |
| } |
| |
| /* It should now be out of any other write domains, and we can update |
| * the domain values for our changes. |
| */ |
| BUG_ON((obj->base.write_domain & ~I915_GEM_DOMAIN_CPU) != 0); |
| |
| /* If we're writing through the CPU, then the GPU read domains will |
| * need to be invalidated at next use. |
| */ |
| if (write) { |
| obj->base.read_domains = I915_GEM_DOMAIN_CPU; |
| obj->base.write_domain = I915_GEM_DOMAIN_CPU; |
| } |
| |
| trace_i915_gem_object_change_domain(obj, |
| old_read_domains, |
| old_write_domain); |
| |
| return 0; |
| } |
| |
| /* Throttle our rendering by waiting until the ring has completed our requests |
| * emitted over 20 msec ago. |
| * |
| * Note that if we were to use the current jiffies each time around the loop, |
| * we wouldn't escape the function with any frames outstanding if the time to |
| * render a frame was over 20ms. |
| * |
| * This should get us reasonable parallelism between CPU and GPU but also |
| * relatively low latency when blocking on a particular request to finish. |
| */ |
| static int |
| i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| unsigned long recent_enough = jiffies - DRM_I915_THROTTLE_JIFFIES; |
| struct drm_i915_gem_request *request, *target = NULL; |
| unsigned reset_counter; |
| int ret; |
| |
| ret = i915_gem_wait_for_error(&dev_priv->gpu_error); |
| if (ret) |
| return ret; |
| |
| ret = i915_gem_check_wedge(&dev_priv->gpu_error, false); |
| if (ret) |
| return ret; |
| |
| spin_lock(&file_priv->mm.lock); |
| list_for_each_entry(request, &file_priv->mm.request_list, client_list) { |
| if (time_after_eq(request->emitted_jiffies, recent_enough)) |
| break; |
| |
| /* |
| * Note that the request might not have been submitted yet. |
| * In which case emitted_jiffies will be zero. |
| */ |
| if (!request->emitted_jiffies) |
| continue; |
| |
| target = request; |
| } |
| reset_counter = atomic_read(&dev_priv->gpu_error.reset_counter); |
| if (target) |
| i915_gem_request_reference(target); |
| spin_unlock(&file_priv->mm.lock); |
| |
| if (target == NULL) |
| return 0; |
| |
| ret = __i915_wait_request(target, reset_counter, true, NULL, NULL); |
| if (ret == 0) |
| queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, 0); |
| |
| i915_gem_request_unreference__unlocked(target); |
| |
| return ret; |
| } |
| |
| static bool |
| i915_vma_misplaced(struct i915_vma *vma, uint32_t alignment, uint64_t flags) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| |
| if (alignment && |
| vma->node.start & (alignment - 1)) |
| return true; |
| |
| if (flags & PIN_MAPPABLE && !obj->map_and_fenceable) |
| return true; |
| |
| if (flags & PIN_OFFSET_BIAS && |
| vma->node.start < (flags & PIN_OFFSET_MASK)) |
| return true; |
| |
| if (flags & PIN_OFFSET_FIXED && |
| vma->node.start != (flags & PIN_OFFSET_MASK)) |
| return true; |
| |
| return false; |
| } |
| |
| void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) |
| { |
| struct drm_i915_gem_object *obj = vma->obj; |
| bool mappable, fenceable; |
| u32 fence_size, fence_alignment; |
| |
| fence_size = i915_gem_get_gtt_size(obj->base.dev, |
| obj->base.size, |
| obj->tiling_mode); |
| fence_alignment = i915_gem_get_gtt_alignment(obj->base.dev, |
| obj->base.size, |
| obj->tiling_mode, |
| true); |
| |
| fenceable = (vma->node.size == fence_size && |
| (vma->node.start & (fence_alignment - 1)) == 0); |
| |
| mappable = (vma->node.start + fence_size <= |
| to_i915(obj->base.dev)->ggtt.mappable_end); |
| |
| obj->map_and_fenceable = mappable && fenceable; |
| } |
| |
| static int |
| i915_gem_object_do_pin(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| const struct i915_ggtt_view *ggtt_view, |
| uint32_t alignment, |
| uint64_t flags) |
| { |
| struct drm_i915_private *dev_priv = obj->base.dev->dev_private; |
| struct i915_vma *vma; |
| unsigned bound; |
| int ret; |
| |
| if (WARN_ON(vm == &dev_priv->mm.aliasing_ppgtt->base)) |
| return -ENODEV; |
| |
| if (WARN_ON(flags & (PIN_GLOBAL | PIN_MAPPABLE) && !i915_is_ggtt(vm))) |
| return -EINVAL; |
| |
| if (WARN_ON((flags & (PIN_MAPPABLE | PIN_GLOBAL)) == PIN_MAPPABLE)) |
| return -EINVAL; |
| |
| if (WARN_ON(i915_is_ggtt(vm) != !!ggtt_view)) |
| return -EINVAL; |
| |
| vma = ggtt_view ? i915_gem_obj_to_ggtt_view(obj, ggtt_view) : |
| i915_gem_obj_to_vma(obj, vm); |
| |
| if (vma) { |
| if (WARN_ON(vma->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT)) |
| return -EBUSY; |
| |
| if (i915_vma_misplaced(vma, alignment, flags)) { |
| WARN(vma->pin_count, |
| "bo is already pinned in %s with incorrect alignment:" |
| " offset=%08x %08x, req.alignment=%x, req.map_and_fenceable=%d," |
| " obj->map_and_fenceable=%d\n", |
| ggtt_view ? "ggtt" : "ppgtt", |
| upper_32_bits(vma->node.start), |
| lower_32_bits(vma->node.start), |
| alignment, |
| !!(flags & PIN_MAPPABLE), |
| obj->map_and_fenceable); |
| ret = i915_vma_unbind(vma); |
| if (ret) |
| return ret; |
| |
| vma = NULL; |
| } |
| } |
| |
| bound = vma ? vma->bound : 0; |
| if (vma == NULL || !drm_mm_node_allocated(&vma->node)) { |
| vma = i915_gem_object_bind_to_vm(obj, vm, ggtt_view, alignment, |
| flags); |
| if (IS_ERR(vma)) |
| return PTR_ERR(vma); |
| } else { |
| ret = i915_vma_bind(vma, obj->cache_level, flags); |
| if (ret) |
| return ret; |
| } |
| |
| if (ggtt_view && ggtt_view->type == I915_GGTT_VIEW_NORMAL && |
| (bound ^ vma->bound) & GLOBAL_BIND) { |
| __i915_vma_set_map_and_fenceable(vma); |
| WARN_ON(flags & PIN_MAPPABLE && !obj->map_and_fenceable); |
| } |
| |
| vma->pin_count++; |
| return 0; |
| } |
| |
| int |
| i915_gem_object_pin(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm, |
| uint32_t alignment, |
| uint64_t flags) |
| { |
| return i915_gem_object_do_pin(obj, vm, |
| i915_is_ggtt(vm) ? &i915_ggtt_view_normal : NULL, |
| alignment, flags); |
| } |
| |
| int |
| i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view, |
| uint32_t alignment, |
| uint64_t flags) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| |
| BUG_ON(!view); |
| |
| return i915_gem_object_do_pin(obj, &ggtt->base, view, |
| alignment, flags | PIN_GLOBAL); |
| } |
| |
| void |
| i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view) |
| { |
| struct i915_vma *vma = i915_gem_obj_to_ggtt_view(obj, view); |
| |
| BUG_ON(!vma); |
| WARN_ON(vma->pin_count == 0); |
| WARN_ON(!i915_gem_obj_ggtt_bound_view(obj, view)); |
| |
| --vma->pin_count; |
| } |
| |
| int |
| i915_gem_busy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_busy *args = data; |
| struct drm_i915_gem_object *obj; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| /* Count all active objects as busy, even if they are currently not used |
| * by the gpu. Users of this interface expect objects to eventually |
| * become non-busy without any further actions, therefore emit any |
| * necessary flushes here. |
| */ |
| ret = i915_gem_object_flush_active(obj); |
| if (ret) |
| goto unref; |
| |
| args->busy = 0; |
| if (obj->active) { |
| int i; |
| |
| for (i = 0; i < I915_NUM_ENGINES; i++) { |
| struct drm_i915_gem_request *req; |
| |
| req = obj->last_read_req[i]; |
| if (req) |
| args->busy |= 1 << (16 + req->engine->exec_id); |
| } |
| if (obj->last_write_req) |
| args->busy |= obj->last_write_req->engine->exec_id; |
| } |
| |
| unref: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| int |
| i915_gem_throttle_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| return i915_gem_ring_throttle(dev, file_priv); |
| } |
| |
| int |
| i915_gem_madvise_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_i915_gem_madvise *args = data; |
| struct drm_i915_gem_object *obj; |
| int ret; |
| |
| switch (args->madv) { |
| case I915_MADV_DONTNEED: |
| case I915_MADV_WILLNEED: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| obj = to_intel_bo(drm_gem_object_lookup(dev, file_priv, args->handle)); |
| if (&obj->base == NULL) { |
| ret = -ENOENT; |
| goto unlock; |
| } |
| |
| if (i915_gem_obj_is_pinned(obj)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (obj->pages && |
| obj->tiling_mode != I915_TILING_NONE && |
| dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES) { |
| if (obj->madv == I915_MADV_WILLNEED) |
| i915_gem_object_unpin_pages(obj); |
| if (args->madv == I915_MADV_WILLNEED) |
| i915_gem_object_pin_pages(obj); |
| } |
| |
| if (obj->madv != __I915_MADV_PURGED) |
| obj->madv = args->madv; |
| |
| /* if the object is no longer attached, discard its backing storage */ |
| if (obj->madv == I915_MADV_DONTNEED && obj->pages == NULL) |
| i915_gem_object_truncate(obj); |
| |
| args->retained = obj->madv != __I915_MADV_PURGED; |
| |
| out: |
| drm_gem_object_unreference(&obj->base); |
| unlock: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| void i915_gem_object_init(struct drm_i915_gem_object *obj, |
| const struct drm_i915_gem_object_ops *ops) |
| { |
| int i; |
| |
| INIT_LIST_HEAD(&obj->global_list); |
| for (i = 0; i < I915_NUM_ENGINES; i++) |
| INIT_LIST_HEAD(&obj->engine_list[i]); |
| INIT_LIST_HEAD(&obj->obj_exec_link); |
| INIT_LIST_HEAD(&obj->vma_list); |
| INIT_LIST_HEAD(&obj->batch_pool_link); |
| |
| obj->ops = ops; |
| |
| obj->fence_reg = I915_FENCE_REG_NONE; |
| obj->madv = I915_MADV_WILLNEED; |
| |
| i915_gem_info_add_obj(obj->base.dev->dev_private, obj->base.size); |
| } |
| |
| static const struct drm_i915_gem_object_ops i915_gem_object_ops = { |
| .flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE, |
| .get_pages = i915_gem_object_get_pages_gtt, |
| .put_pages = i915_gem_object_put_pages_gtt, |
| }; |
| |
| struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev, |
| size_t size) |
| { |
| struct drm_i915_gem_object *obj; |
| struct address_space *mapping; |
| gfp_t mask; |
| |
| obj = i915_gem_object_alloc(dev); |
| if (obj == NULL) |
| return NULL; |
| |
| if (drm_gem_object_init(dev, &obj->base, size) != 0) { |
| i915_gem_object_free(obj); |
| return NULL; |
| } |
| |
| mask = GFP_HIGHUSER | __GFP_RECLAIMABLE; |
| if (IS_CRESTLINE(dev) || IS_BROADWATER(dev)) { |
| /* 965gm cannot relocate objects above 4GiB. */ |
| mask &= ~__GFP_HIGHMEM; |
| mask |= __GFP_DMA32; |
| } |
| |
| mapping = file_inode(obj->base.filp)->i_mapping; |
| mapping_set_gfp_mask(mapping, mask); |
| |
| i915_gem_object_init(obj, &i915_gem_object_ops); |
| |
| obj->base.write_domain = I915_GEM_DOMAIN_CPU; |
| obj->base.read_domains = I915_GEM_DOMAIN_CPU; |
| |
| if (HAS_LLC(dev)) { |
| /* On some devices, we can have the GPU use the LLC (the CPU |
| * cache) for about a 10% performance improvement |
| * compared to uncached. Graphics requests other than |
| * display scanout are coherent with the CPU in |
| * accessing this cache. This means in this mode we |
| * don't need to clflush on the CPU side, and on the |
| * GPU side we only need to flush internal caches to |
| * get data visible to the CPU. |
| * |
| * However, we maintain the display planes as UC, and so |
| * need to rebind when first used as such. |
| */ |
| obj->cache_level = I915_CACHE_LLC; |
| } else |
| obj->cache_level = I915_CACHE_NONE; |
| |
| trace_i915_gem_object_create(obj); |
| |
| return obj; |
| } |
| |
| static bool discard_backing_storage(struct drm_i915_gem_object *obj) |
| { |
| /* If we are the last user of the backing storage (be it shmemfs |
| * pages or stolen etc), we know that the pages are going to be |
| * immediately released. In this case, we can then skip copying |
| * back the contents from the GPU. |
| */ |
| |
| if (obj->madv != I915_MADV_WILLNEED) |
| return false; |
| |
| if (obj->base.filp == NULL) |
| return true; |
| |
| /* At first glance, this looks racy, but then again so would be |
| * userspace racing mmap against close. However, the first external |
| * reference to the filp can only be obtained through the |
| * i915_gem_mmap_ioctl() which safeguards us against the user |
| * acquiring such a reference whilst we are in the middle of |
| * freeing the object. |
| */ |
| return atomic_long_read(&obj->base.filp->f_count) == 1; |
| } |
| |
| void i915_gem_free_object(struct drm_gem_object *gem_obj) |
| { |
| struct drm_i915_gem_object *obj = to_intel_bo(gem_obj); |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct i915_vma *vma, *next; |
| |
| intel_runtime_pm_get(dev_priv); |
| |
| trace_i915_gem_object_destroy(obj); |
| |
| list_for_each_entry_safe(vma, next, &obj->vma_list, obj_link) { |
| int ret; |
| |
| vma->pin_count = 0; |
| ret = i915_vma_unbind(vma); |
| if (WARN_ON(ret == -ERESTARTSYS)) { |
| bool was_interruptible; |
| |
| was_interruptible = dev_priv->mm.interruptible; |
| dev_priv->mm.interruptible = false; |
| |
| WARN_ON(i915_vma_unbind(vma)); |
| |
| dev_priv->mm.interruptible = was_interruptible; |
| } |
| } |
| |
| /* Stolen objects don't hold a ref, but do hold pin count. Fix that up |
| * before progressing. */ |
| if (obj->stolen) |
| i915_gem_object_unpin_pages(obj); |
| |
| WARN_ON(obj->frontbuffer_bits); |
| |
| if (obj->pages && obj->madv == I915_MADV_WILLNEED && |
| dev_priv->quirks & QUIRK_PIN_SWIZZLED_PAGES && |
| obj->tiling_mode != I915_TILING_NONE) |
| i915_gem_object_unpin_pages(obj); |
| |
| if (WARN_ON(obj->pages_pin_count)) |
| obj->pages_pin_count = 0; |
| if (discard_backing_storage(obj)) |
| obj->madv = I915_MADV_DONTNEED; |
| i915_gem_object_put_pages(obj); |
| i915_gem_object_free_mmap_offset(obj); |
| |
| BUG_ON(obj->pages); |
| |
| if (obj->base.import_attach) |
| drm_prime_gem_destroy(&obj->base, NULL); |
| |
| if (obj->ops->release) |
| obj->ops->release(obj); |
| |
| drm_gem_object_release(&obj->base); |
| i915_gem_info_remove_obj(dev_priv, obj->base.size); |
| |
| kfree(obj->bit_17); |
| i915_gem_object_free(obj); |
| |
| intel_runtime_pm_put(dev_priv); |
| } |
| |
| struct i915_vma *i915_gem_obj_to_vma(struct drm_i915_gem_object *obj, |
| struct i915_address_space *vm) |
| { |
| struct i915_vma *vma; |
| list_for_each_entry(vma, &obj->vma_list, obj_link) { |
| if (vma->ggtt_view.type == I915_GGTT_VIEW_NORMAL && |
| vma->vm == vm) |
| return vma; |
| } |
| return NULL; |
| } |
| |
| struct i915_vma *i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj, |
| const struct i915_ggtt_view *view) |
| { |
| struct drm_device *dev = obj->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| struct i915_vma *vma; |
| |
| BUG_ON(!view); |
| |
| list_for_each_entry(vma, &obj->vma_list, obj_link) |
| if (vma->vm == &ggtt->base && |
| i915_ggtt_view_equal(&vma->ggtt_view, view)) |
| return vma; |
| return NULL; |
| } |
| |
| void i915_gem_vma_destroy(struct i915_vma *vma) |
| { |
| WARN_ON(vma->node.allocated); |
| |
| /* Keep the vma as a placeholder in the execbuffer reservation lists */ |
| if (!list_empty(&vma->exec_list)) |
| return; |
| |
| if (!vma->is_ggtt) |
| i915_ppgtt_put(i915_vm_to_ppgtt(vma->vm)); |
| |
| list_del(&vma->obj_link); |
| |
| kmem_cache_free(to_i915(vma->obj->base.dev)->vmas, vma); |
| } |
| |
| static void |
| i915_gem_stop_engines(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| |
| for_each_engine(engine, dev_priv) |
| dev_priv->gt.stop_engine(engine); |
| } |
| |
| int |
| i915_gem_suspend(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret = 0; |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_gpu_idle(dev); |
| if (ret) |
| goto err; |
| |
| i915_gem_retire_requests(dev); |
| |
| i915_gem_stop_engines(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work); |
| cancel_delayed_work_sync(&dev_priv->mm.retire_work); |
| flush_delayed_work(&dev_priv->mm.idle_work); |
| |
| /* Assert that we sucessfully flushed all the work and |
| * reset the GPU back to its idle, low power state. |
| */ |
| WARN_ON(dev_priv->mm.busy); |
| |
| return 0; |
| |
| err: |
| mutex_unlock(&dev->struct_mutex); |
| return ret; |
| } |
| |
| int i915_gem_l3_remap(struct drm_i915_gem_request *req, int slice) |
| { |
| struct intel_engine_cs *engine = req->engine; |
| struct drm_device *dev = engine->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 *remap_info = dev_priv->l3_parity.remap_info[slice]; |
| int i, ret; |
| |
| if (!HAS_L3_DPF(dev) || !remap_info) |
| return 0; |
| |
| ret = intel_ring_begin(req, GEN7_L3LOG_SIZE / 4 * 3); |
| if (ret) |
| return ret; |
| |
| /* |
| * Note: We do not worry about the concurrent register cacheline hang |
| * here because no other code should access these registers other than |
| * at initialization time. |
| */ |
| for (i = 0; i < GEN7_L3LOG_SIZE / 4; i++) { |
| intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1)); |
| intel_ring_emit_reg(engine, GEN7_L3LOG(slice, i)); |
| intel_ring_emit(engine, remap_info[i]); |
| } |
| |
| intel_ring_advance(engine); |
| |
| return ret; |
| } |
| |
| void i915_gem_init_swizzling(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (INTEL_INFO(dev)->gen < 5 || |
| dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE) |
| return; |
| |
| I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) | |
| DISP_TILE_SURFACE_SWIZZLING); |
| |
| if (IS_GEN5(dev)) |
| return; |
| |
| I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_SWZCTL); |
| if (IS_GEN6(dev)) |
| I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB)); |
| else if (IS_GEN7(dev)) |
| I915_WRITE(ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB)); |
| else if (IS_GEN8(dev)) |
| I915_WRITE(GAMTARBMODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_BDW)); |
| else |
| BUG(); |
| } |
| |
| static void init_unused_ring(struct drm_device *dev, u32 base) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| I915_WRITE(RING_CTL(base), 0); |
| I915_WRITE(RING_HEAD(base), 0); |
| I915_WRITE(RING_TAIL(base), 0); |
| I915_WRITE(RING_START(base), 0); |
| } |
| |
| static void init_unused_rings(struct drm_device *dev) |
| { |
| if (IS_I830(dev)) { |
| init_unused_ring(dev, PRB1_BASE); |
| init_unused_ring(dev, SRB0_BASE); |
| init_unused_ring(dev, SRB1_BASE); |
| init_unused_ring(dev, SRB2_BASE); |
| init_unused_ring(dev, SRB3_BASE); |
| } else if (IS_GEN2(dev)) { |
| init_unused_ring(dev, SRB0_BASE); |
| init_unused_ring(dev, SRB1_BASE); |
| } else if (IS_GEN3(dev)) { |
| init_unused_ring(dev, PRB1_BASE); |
| init_unused_ring(dev, PRB2_BASE); |
| } |
| } |
| |
| int i915_gem_init_engines(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| ret = intel_init_render_ring_buffer(dev); |
| if (ret) |
| return ret; |
| |
| if (HAS_BSD(dev)) { |
| ret = intel_init_bsd_ring_buffer(dev); |
| if (ret) |
| goto cleanup_render_ring; |
| } |
| |
| if (HAS_BLT(dev)) { |
| ret = intel_init_blt_ring_buffer(dev); |
| if (ret) |
| goto cleanup_bsd_ring; |
| } |
| |
| if (HAS_VEBOX(dev)) { |
| ret = intel_init_vebox_ring_buffer(dev); |
| if (ret) |
| goto cleanup_blt_ring; |
| } |
| |
| if (HAS_BSD2(dev)) { |
| ret = intel_init_bsd2_ring_buffer(dev); |
| if (ret) |
| goto cleanup_vebox_ring; |
| } |
| |
| return 0; |
| |
| cleanup_vebox_ring: |
| intel_cleanup_engine(&dev_priv->engine[VECS]); |
| cleanup_blt_ring: |
| intel_cleanup_engine(&dev_priv->engine[BCS]); |
| cleanup_bsd_ring: |
| intel_cleanup_engine(&dev_priv->engine[VCS]); |
| cleanup_render_ring: |
| intel_cleanup_engine(&dev_priv->engine[RCS]); |
| |
| return ret; |
| } |
| |
| int |
| i915_gem_init_hw(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| int ret, j; |
| |
| if (INTEL_INFO(dev)->gen < 6 && !intel_enable_gtt()) |
| return -EIO; |
| |
| /* Double layer security blanket, see i915_gem_init() */ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| if (dev_priv->ellc_size) |
| I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf)); |
| |
| if (IS_HASWELL(dev)) |
| I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev) ? |
| LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED); |
| |
| if (HAS_PCH_NOP(dev)) { |
| if (IS_IVYBRIDGE(dev)) { |
| u32 temp = I915_READ(GEN7_MSG_CTL); |
| temp &= ~(WAIT_FOR_PCH_FLR_ACK | WAIT_FOR_PCH_RESET_ACK); |
| I915_WRITE(GEN7_MSG_CTL, temp); |
| } else if (INTEL_INFO(dev)->gen >= 7) { |
| u32 temp = I915_READ(HSW_NDE_RSTWRN_OPT); |
| temp &= ~RESET_PCH_HANDSHAKE_ENABLE; |
| I915_WRITE(HSW_NDE_RSTWRN_OPT, temp); |
| } |
| } |
| |
| i915_gem_init_swizzling(dev); |
| |
| /* |
| * At least 830 can leave some of the unused rings |
| * "active" (ie. head != tail) after resume which |
| * will prevent c3 entry. Makes sure all unused rings |
| * are totally idle. |
| */ |
| init_unused_rings(dev); |
| |
| BUG_ON(!dev_priv->kernel_context); |
| |
| ret = i915_ppgtt_init_hw(dev); |
| if (ret) { |
| DRM_ERROR("PPGTT enable HW failed %d\n", ret); |
| goto out; |
| } |
| |
| /* Need to do basic initialisation of all rings first: */ |
| for_each_engine(engine, dev_priv) { |
| ret = engine->init_hw(engine); |
| if (ret) |
| goto out; |
| } |
| |
| /* We can't enable contexts until all firmware is loaded */ |
| if (HAS_GUC_UCODE(dev)) { |
| ret = intel_guc_ucode_load(dev); |
| if (ret) { |
| DRM_ERROR("Failed to initialize GuC, error %d\n", ret); |
| ret = -EIO; |
| goto out; |
| } |
| } |
| |
| /* |
| * Increment the next seqno by 0x100 so we have a visible break |
| * on re-initialisation |
| */ |
| ret = i915_gem_set_seqno(dev, dev_priv->next_seqno+0x100); |
| if (ret) |
| goto out; |
| |
| /* Now it is safe to go back round and do everything else: */ |
| for_each_engine(engine, dev_priv) { |
| struct drm_i915_gem_request *req; |
| |
| req = i915_gem_request_alloc(engine, NULL); |
| if (IS_ERR(req)) { |
| ret = PTR_ERR(req); |
| i915_gem_cleanup_engines(dev); |
| goto out; |
| } |
| |
| if (engine->id == RCS) { |
| for (j = 0; j < NUM_L3_SLICES(dev); j++) |
| i915_gem_l3_remap(req, j); |
| } |
| |
| ret = i915_ppgtt_init_ring(req); |
| if (ret && ret != -EIO) { |
| DRM_ERROR("PPGTT enable %s failed %d\n", |
| engine->name, ret); |
| i915_gem_request_cancel(req); |
| i915_gem_cleanup_engines(dev); |
| goto out; |
| } |
| |
| ret = i915_gem_context_enable(req); |
| if (ret && ret != -EIO) { |
| DRM_ERROR("Context enable %s failed %d\n", |
| engine->name, ret); |
| i915_gem_request_cancel(req); |
| i915_gem_cleanup_engines(dev); |
| goto out; |
| } |
| |
| i915_add_request_no_flush(req); |
| } |
| |
| out: |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| return ret; |
| } |
| |
| int i915_gem_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| i915.enable_execlists = intel_sanitize_enable_execlists(dev, |
| i915.enable_execlists); |
| |
| mutex_lock(&dev->struct_mutex); |
| |
| if (!i915.enable_execlists) { |
| dev_priv->gt.execbuf_submit = i915_gem_ringbuffer_submission; |
| dev_priv->gt.init_engines = i915_gem_init_engines; |
| dev_priv->gt.cleanup_engine = intel_cleanup_engine; |
| dev_priv->gt.stop_engine = intel_stop_engine; |
| } else { |
| dev_priv->gt.execbuf_submit = intel_execlists_submission; |
| dev_priv->gt.init_engines = intel_logical_rings_init; |
| dev_priv->gt.cleanup_engine = intel_logical_ring_cleanup; |
| dev_priv->gt.stop_engine = intel_logical_ring_stop; |
| } |
| |
| /* This is just a security blanket to placate dragons. |
| * On some systems, we very sporadically observe that the first TLBs |
| * used by the CS may be stale, despite us poking the TLB reset. If |
| * we hold the forcewake during initialisation these problems |
| * just magically go away. |
| */ |
| intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); |
| |
| ret = i915_gem_init_userptr(dev); |
| if (ret) |
| goto out_unlock; |
| |
| i915_gem_init_ggtt(dev); |
| |
| ret = i915_gem_context_init(dev); |
| if (ret) |
| goto out_unlock; |
| |
| ret = dev_priv->gt.init_engines(dev); |
| if (ret) |
| goto out_unlock; |
| |
| ret = i915_gem_init_hw(dev); |
| if (ret == -EIO) { |
| /* Allow ring initialisation to fail by marking the GPU as |
| * wedged. But we only want to do this where the GPU is angry, |
| * for all other failure, such as an allocation failure, bail. |
| */ |
| DRM_ERROR("Failed to initialize GPU, declaring it wedged\n"); |
| atomic_or(I915_WEDGED, &dev_priv->gpu_error.reset_counter); |
| ret = 0; |
| } |
| |
| out_unlock: |
| intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| void |
| i915_gem_cleanup_engines(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_engine_cs *engine; |
| |
| for_each_engine(engine, dev_priv) |
| dev_priv->gt.cleanup_engine(engine); |
| |
| if (i915.enable_execlists) |
| /* |
| * Neither the BIOS, ourselves or any other kernel |
| * expects the system to be in execlists mode on startup, |
| * so we need to reset the GPU back to legacy mode. |
| */ |
| intel_gpu_reset(dev, ALL_ENGINES); |
| } |
| |
| static void |
| init_engine_lists(struct intel_engine_cs *engine) |
| { |
| INIT_LIST_HEAD(&engine->active_list); |
| INIT_LIST_HEAD(&engine->request_list); |
| } |
| |
| void |
| i915_gem_load_init_fences(struct drm_i915_private *dev_priv) |
| { |
| struct drm_device *dev = dev_priv->dev; |
| |
| if (INTEL_INFO(dev_priv)->gen >= 7 && !IS_VALLEYVIEW(dev_priv) && |
| !IS_CHERRYVIEW(dev_priv)) |
| dev_priv->num_fence_regs = 32; |
| else if (INTEL_INFO(dev_priv)->gen >= 4 || IS_I945G(dev_priv) || |
| IS_I945GM(dev_priv) || IS_G33(dev_priv)) |
| dev_priv->num_fence_regs = 16; |
| else |
| dev_priv->num_fence_regs = 8; |
| |
| if (intel_vgpu_active(dev)) |
| dev_priv->num_fence_regs = |
| I915_READ(vgtif_reg(avail_rs.fence_num)); |
| |
| /* Initialize fence registers to zero */ |
| i915_gem_restore_fences(dev); |
| |
| i915_gem_detect_bit_6_swizzle(dev); |
| } |
| |
| void |
| i915_gem_load_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i; |
| |
| dev_priv->objects = |
| kmem_cache_create("i915_gem_object", |
| sizeof(struct drm_i915_gem_object), 0, |
| SLAB_HWCACHE_ALIGN, |
| NULL); |
| dev_priv->vmas = |
| kmem_cache_create("i915_gem_vma", |
| sizeof(struct i915_vma), 0, |
| SLAB_HWCACHE_ALIGN, |
| NULL); |
| dev_priv->requests = |
| kmem_cache_create("i915_gem_request", |
| sizeof(struct drm_i915_gem_request), 0, |
| SLAB_HWCACHE_ALIGN, |
| NULL); |
| |
| INIT_LIST_HEAD(&dev_priv->vm_list); |
| INIT_LIST_HEAD(&dev_priv->context_list); |
| INIT_LIST_HEAD(&dev_priv->mm.unbound_list); |
| INIT_LIST_HEAD(&dev_priv->mm.bound_list); |
| INIT_LIST_HEAD(&dev_priv->mm.fence_list); |
| for (i = 0; i < I915_NUM_ENGINES; i++) |
| init_engine_lists(&dev_priv->engine[i]); |
| for (i = 0; i < I915_MAX_NUM_FENCES; i++) |
| INIT_LIST_HEAD(&dev_priv->fence_regs[i].lru_list); |
| INIT_DELAYED_WORK(&dev_priv->mm.retire_work, |
| i915_gem_retire_work_handler); |
| INIT_DELAYED_WORK(&dev_priv->mm.idle_work, |
| i915_gem_idle_work_handler); |
| init_waitqueue_head(&dev_priv->gpu_error.reset_queue); |
| |
| dev_priv->relative_constants_mode = I915_EXEC_CONSTANTS_REL_GENERAL; |
| |
| /* |
| * Set initial sequence number for requests. |
| * Using this number allows the wraparound to happen early, |
| * catching any obvious problems. |
| */ |
| dev_priv->next_seqno = ((u32)~0 - 0x1100); |
| dev_priv->last_seqno = ((u32)~0 - 0x1101); |
| |
| INIT_LIST_HEAD(&dev_priv->mm.fence_list); |
| |
| init_waitqueue_head(&dev_priv->pending_flip_queue); |
| |
| dev_priv->mm.interruptible = true; |
| |
| mutex_init(&dev_priv->fb_tracking.lock); |
| } |
| |
| void i915_gem_load_cleanup(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| |
| kmem_cache_destroy(dev_priv->requests); |
| kmem_cache_destroy(dev_priv->vmas); |
| kmem_cache_destroy(dev_priv->objects); |
| } |
| |
| void i915_gem_release(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| /* Clean up our request list when the client is going away, so that |
| * later retire_requests won't dereference our soon-to-be-gone |
| * file_priv. |
| */ |
| spin_lock(&file_priv->mm.lock); |
| while (!list_empty(&file_priv->mm.request_list)) { |
| struct drm_i915_gem_request *request; |
| |
| request = list_first_entry(&file_priv->mm.request_list, |
| struct drm_i915_gem_request, |
| client_list); |
| list_del(&request->client_list); |
| request->file_priv = NULL; |
| } |
| spin_unlock(&file_priv->mm.lock); |
| |
| if (!list_empty(&file_priv->rps.link)) { |
| spin_lock(&to_i915(dev)->rps.client_lock); |
| list_del(&file_priv->rps.link); |
| spin_unlock(&to_i915(dev)->rps.client_lock); |
| } |
| } |
| |
| int i915_gem_open(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv; |
| int ret; |
| |
| DRM_DEBUG_DRIVER("\n"); |
| |
| file_priv = kzalloc(sizeof(*file_priv), GFP_KERNEL); |
| if (!file_priv) |
| return -ENOMEM; |
| |
| file->driver_priv = file_priv; |
| file_priv->dev_priv = dev->dev_private; |
| file_priv->file = file; |
| INIT_LIST_HEAD(&file_priv->rps.link); |
| |
| spin_lock_init(&file_priv->mm.lock); |
| INIT_LIST_HEAD(&file_priv->mm.request_list); |
| |
| file_priv->bsd_ring = -1; |
| |
| ret = i915_gem_context_open(dev, file); |
| if (ret) |
| kfree(file_priv); |
| |
| return ret; |
| } |
| |
| /** |
| * i915_gem_track_fb - update frontbuffer tracking |
| * @old: current GEM buffer for the frontbuffer slots |
| * @new: new GEM buffer for the frontbuffer slots |
| * @frontbuffer_bits: bitmask of frontbuffer slots |
| * |
| * This updates the frontbuffer tracking bits @frontbuffer_bits by clearing them |
| * from @old and setting them in @new. Both @old and @new can be NULL. |
| */ |
| void i915_gem_track_fb(struct drm_i915_gem_object *old, |
| struct drm_i915_gem_object *new, |
| unsigned frontbuffer_bits) |
| { |
| if (old) { |
| WARN_ON(!mutex_is_locked(&old->base.dev->struct_mutex)); |
| WARN_ON(!(old->frontbuffer_bits & frontbuffer_bits)); |
| old->frontbuffer_bits &= ~frontbuffer_bits; |
| } |
| |
| if (new) { |
| WARN_ON(!mutex_is_locked(&new->base.dev->struct_mutex)); |
| WARN_ON(new->frontbuffer_bits & frontbuffer_bits); |
| new->frontbuffer_bits |= frontbuffer_bits; |
| } |
| } |
| |
| /* All the new VM stuff */ |
| u64 i915_gem_obj_offset(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm) |
| { |
| struct drm_i915_private *dev_priv = o->base.dev->dev_private; |
| struct i915_vma *vma; |
| |
| WARN_ON(vm == &dev_priv->mm.aliasing_ppgtt->base); |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) { |
| if (vma->is_ggtt && |
| vma->ggtt_view.type != I915_GGTT_VIEW_NORMAL) |
| continue; |
| if (vma->vm == vm) |
| return vma->node.start; |
| } |
| |
| WARN(1, "%s vma for this object not found.\n", |
| i915_is_ggtt(vm) ? "global" : "ppgtt"); |
| return -1; |
| } |
| |
| u64 i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o, |
| const struct i915_ggtt_view *view) |
| { |
| struct drm_i915_private *dev_priv = to_i915(o->base.dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) |
| if (vma->vm == &ggtt->base && |
| i915_ggtt_view_equal(&vma->ggtt_view, view)) |
| return vma->node.start; |
| |
| WARN(1, "global vma for this object not found. (view=%u)\n", view->type); |
| return -1; |
| } |
| |
| bool i915_gem_obj_bound(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm) |
| { |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) { |
| if (vma->is_ggtt && |
| vma->ggtt_view.type != I915_GGTT_VIEW_NORMAL) |
| continue; |
| if (vma->vm == vm && drm_mm_node_allocated(&vma->node)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool i915_gem_obj_ggtt_bound_view(struct drm_i915_gem_object *o, |
| const struct i915_ggtt_view *view) |
| { |
| struct drm_i915_private *dev_priv = to_i915(o->base.dev); |
| struct i915_ggtt *ggtt = &dev_priv->ggtt; |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) |
| if (vma->vm == &ggtt->base && |
| i915_ggtt_view_equal(&vma->ggtt_view, view) && |
| drm_mm_node_allocated(&vma->node)) |
| return true; |
| |
| return false; |
| } |
| |
| bool i915_gem_obj_bound_any(struct drm_i915_gem_object *o) |
| { |
| struct i915_vma *vma; |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) |
| if (drm_mm_node_allocated(&vma->node)) |
| return true; |
| |
| return false; |
| } |
| |
| unsigned long i915_gem_obj_size(struct drm_i915_gem_object *o, |
| struct i915_address_space *vm) |
| { |
| struct drm_i915_private *dev_priv = o->base.dev->dev_private; |
| struct i915_vma *vma; |
| |
| WARN_ON(vm == &dev_priv->mm.aliasing_ppgtt->base); |
| |
| BUG_ON(list_empty(&o->vma_list)); |
| |
| list_for_each_entry(vma, &o->vma_list, obj_link) { |
| if (vma->is_ggtt && |
| vma->ggtt_view.type != I915_GGTT_VIEW_NORMAL) |
| continue; |
| if (vma->vm == vm) |
| return vma->node.size; |
| } |
| return 0; |
| } |
| |
| bool i915_gem_obj_is_pinned(struct drm_i915_gem_object *obj) |
| { |
| struct i915_vma *vma; |
| list_for_each_entry(vma, &obj->vma_list, obj_link) |
| if (vma->pin_count > 0) |
| return true; |
| |
| return false; |
| } |
| |
| /* Like i915_gem_object_get_page(), but mark the returned page dirty */ |
| struct page * |
| i915_gem_object_get_dirty_page(struct drm_i915_gem_object *obj, int n) |
| { |
| struct page *page; |
| |
| /* Only default objects have per-page dirty tracking */ |
| if (WARN_ON((obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE) == 0)) |
| return NULL; |
| |
| page = i915_gem_object_get_page(obj, n); |
| set_page_dirty(page); |
| return page; |
| } |
| |
| /* Allocate a new GEM object and fill it with the supplied data */ |
| struct drm_i915_gem_object * |
| i915_gem_object_create_from_data(struct drm_device *dev, |
| const void *data, size_t size) |
| { |
| struct drm_i915_gem_object *obj; |
| struct sg_table *sg; |
| size_t bytes; |
| int ret; |
| |
| obj = i915_gem_alloc_object(dev, round_up(size, PAGE_SIZE)); |
| if (IS_ERR_OR_NULL(obj)) |
| return obj; |
| |
| ret = i915_gem_object_set_to_cpu_domain(obj, true); |
| if (ret) |
| goto fail; |
| |
| ret = i915_gem_object_get_pages(obj); |
| if (ret) |
| goto fail; |
| |
| i915_gem_object_pin_pages(obj); |
| sg = obj->pages; |
| bytes = sg_copy_from_buffer(sg->sgl, sg->nents, (void *)data, size); |
| obj->dirty = 1; /* Backing store is now out of date */ |
| i915_gem_object_unpin_pages(obj); |
| |
| if (WARN_ON(bytes != size)) { |
| DRM_ERROR("Incomplete copy, wrote %zu of %zu", bytes, size); |
| ret = -EFAULT; |
| goto fail; |
| } |
| |
| return obj; |
| |
| fail: |
| drm_gem_object_unreference(&obj->base); |
| return ERR_PTR(ret); |
| } |