asix: Factor out common code
Allow the new driver for the AX88172A to share code with the
existing drivers for ASIX devices.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 6564c32..8c513f7 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -20,137 +20,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-// #define DEBUG // error path messages, extra info
-// #define VERBOSE // more; success messages
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/crc32.h>
-#include <linux/usb/usbnet.h>
-#include <linux/slab.h>
-#include <linux/if_vlan.h>
-
-#define DRIVER_VERSION "22-Dec-2011"
-#define DRIVER_NAME "asix"
-
-/* ASIX AX8817X based USB 2.0 Ethernet Devices */
-
-#define AX_CMD_SET_SW_MII 0x06
-#define AX_CMD_READ_MII_REG 0x07
-#define AX_CMD_WRITE_MII_REG 0x08
-#define AX_CMD_SET_HW_MII 0x0a
-#define AX_CMD_READ_EEPROM 0x0b
-#define AX_CMD_WRITE_EEPROM 0x0c
-#define AX_CMD_WRITE_ENABLE 0x0d
-#define AX_CMD_WRITE_DISABLE 0x0e
-#define AX_CMD_READ_RX_CTL 0x0f
-#define AX_CMD_WRITE_RX_CTL 0x10
-#define AX_CMD_READ_IPG012 0x11
-#define AX_CMD_WRITE_IPG0 0x12
-#define AX_CMD_WRITE_IPG1 0x13
-#define AX_CMD_READ_NODE_ID 0x13
-#define AX_CMD_WRITE_NODE_ID 0x14
-#define AX_CMD_WRITE_IPG2 0x14
-#define AX_CMD_WRITE_MULTI_FILTER 0x16
-#define AX88172_CMD_READ_NODE_ID 0x17
-#define AX_CMD_READ_PHY_ID 0x19
-#define AX_CMD_READ_MEDIUM_STATUS 0x1a
-#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
-#define AX_CMD_READ_MONITOR_MODE 0x1c
-#define AX_CMD_WRITE_MONITOR_MODE 0x1d
-#define AX_CMD_READ_GPIOS 0x1e
-#define AX_CMD_WRITE_GPIOS 0x1f
-#define AX_CMD_SW_RESET 0x20
-#define AX_CMD_SW_PHY_STATUS 0x21
-#define AX_CMD_SW_PHY_SELECT 0x22
-
-#define AX_MONITOR_MODE 0x01
-#define AX_MONITOR_LINK 0x02
-#define AX_MONITOR_MAGIC 0x04
-#define AX_MONITOR_HSFS 0x10
-
-/* AX88172 Medium Status Register values */
-#define AX88172_MEDIUM_FD 0x02
-#define AX88172_MEDIUM_TX 0x04
-#define AX88172_MEDIUM_FC 0x10
-#define AX88172_MEDIUM_DEFAULT \
- ( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
-
-#define AX_MCAST_FILTER_SIZE 8
-#define AX_MAX_MCAST 64
-
-#define AX_SWRESET_CLEAR 0x00
-#define AX_SWRESET_RR 0x01
-#define AX_SWRESET_RT 0x02
-#define AX_SWRESET_PRTE 0x04
-#define AX_SWRESET_PRL 0x08
-#define AX_SWRESET_BZ 0x10
-#define AX_SWRESET_IPRL 0x20
-#define AX_SWRESET_IPPD 0x40
-
-#define AX88772_IPG0_DEFAULT 0x15
-#define AX88772_IPG1_DEFAULT 0x0c
-#define AX88772_IPG2_DEFAULT 0x12
-
-/* AX88772 & AX88178 Medium Mode Register */
-#define AX_MEDIUM_PF 0x0080
-#define AX_MEDIUM_JFE 0x0040
-#define AX_MEDIUM_TFC 0x0020
-#define AX_MEDIUM_RFC 0x0010
-#define AX_MEDIUM_ENCK 0x0008
-#define AX_MEDIUM_AC 0x0004
-#define AX_MEDIUM_FD 0x0002
-#define AX_MEDIUM_GM 0x0001
-#define AX_MEDIUM_SM 0x1000
-#define AX_MEDIUM_SBP 0x0800
-#define AX_MEDIUM_PS 0x0200
-#define AX_MEDIUM_RE 0x0100
-
-#define AX88178_MEDIUM_DEFAULT \
- (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
- AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
- AX_MEDIUM_RE)
-
-#define AX88772_MEDIUM_DEFAULT \
- (AX_MEDIUM_FD | AX_MEDIUM_RFC | \
- AX_MEDIUM_TFC | AX_MEDIUM_PS | \
- AX_MEDIUM_AC | AX_MEDIUM_RE)
-
-/* AX88772 & AX88178 RX_CTL values */
-#define AX_RX_CTL_SO 0x0080
-#define AX_RX_CTL_AP 0x0020
-#define AX_RX_CTL_AM 0x0010
-#define AX_RX_CTL_AB 0x0008
-#define AX_RX_CTL_SEP 0x0004
-#define AX_RX_CTL_AMALL 0x0002
-#define AX_RX_CTL_PRO 0x0001
-#define AX_RX_CTL_MFB_2048 0x0000
-#define AX_RX_CTL_MFB_4096 0x0100
-#define AX_RX_CTL_MFB_8192 0x0200
-#define AX_RX_CTL_MFB_16384 0x0300
-
-#define AX_DEFAULT_RX_CTL (AX_RX_CTL_SO | AX_RX_CTL_AB)
-
-/* GPIO 0 .. 2 toggles */
-#define AX_GPIO_GPO0EN 0x01 /* GPIO0 Output enable */
-#define AX_GPIO_GPO_0 0x02 /* GPIO0 Output value */
-#define AX_GPIO_GPO1EN 0x04 /* GPIO1 Output enable */
-#define AX_GPIO_GPO_1 0x08 /* GPIO1 Output value */
-#define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */
-#define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */
-#define AX_GPIO_RESERVED 0x40 /* Reserved */
-#define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */
-
-#define AX_EEPROM_MAGIC 0xdeadbeef
-#define AX88172_EEPROM_LEN 0x40
-#define AX88772_EEPROM_LEN 0xff
+#include "asix.h"
#define PHY_MODE_MARVELL 0x0000
#define MII_MARVELL_LED_CTRL 0x0018
@@ -166,15 +36,6 @@
#define PHY_MODE_RTL8211CL 0x000C
-/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct asix_data {
- u8 multi_filter[AX_MCAST_FILTER_SIZE];
- u8 mac_addr[ETH_ALEN];
- u8 phymode;
- u8 ledmode;
- u8 eeprom_len;
-};
-
struct ax88172_int_data {
__le16 res1;
u8 link;
@@ -183,225 +44,6 @@
__le16 res3;
} __packed;
-static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- void *buf;
- int err = -ENOMEM;
-
- netdev_dbg(dev->net, "asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
- cmd, value, index, size);
-
- buf = kmalloc(size, GFP_KERNEL);
- if (!buf)
- goto out;
-
- err = usb_control_msg(
- dev->udev,
- usb_rcvctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- buf,
- size,
- USB_CTRL_GET_TIMEOUT);
- if (err == size)
- memcpy(data, buf, size);
- else if (err >= 0)
- err = -EINVAL;
- kfree(buf);
-
-out:
- return err;
-}
-
-static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- void *buf = NULL;
- int err = -ENOMEM;
-
- netdev_dbg(dev->net, "asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
- cmd, value, index, size);
-
- if (data) {
- buf = kmemdup(data, size, GFP_KERNEL);
- if (!buf)
- goto out;
- }
-
- err = usb_control_msg(
- dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- cmd,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- value,
- index,
- buf,
- size,
- USB_CTRL_SET_TIMEOUT);
- kfree(buf);
-
-out:
- return err;
-}
-
-static void asix_async_cmd_callback(struct urb *urb)
-{
- struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
- int status = urb->status;
-
- if (status < 0)
- printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
- status);
-
- kfree(req);
- usb_free_urb(urb);
-}
-
-static void
-asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
- u16 size, void *data)
-{
- struct usb_ctrlrequest *req;
- int status;
- struct urb *urb;
-
- netdev_dbg(dev->net, "asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
- cmd, value, index, size);
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urb) {
- netdev_err(dev->net, "Error allocating URB in write_cmd_async!\n");
- return;
- }
-
- req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
- if (!req) {
- netdev_err(dev->net, "Failed to allocate memory for control request\n");
- usb_free_urb(urb);
- return;
- }
-
- req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
- req->bRequest = cmd;
- req->wValue = cpu_to_le16(value);
- req->wIndex = cpu_to_le16(index);
- req->wLength = cpu_to_le16(size);
-
- usb_fill_control_urb(urb, dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- (void *)req, data, size,
- asix_async_cmd_callback, req);
-
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status < 0) {
- netdev_err(dev->net, "Error submitting the control message: status=%d\n",
- status);
- kfree(req);
- usb_free_urb(urb);
- }
-}
-
-static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
- int offset = 0;
-
- while (offset + sizeof(u32) < skb->len) {
- struct sk_buff *ax_skb;
- u16 size;
- u32 header = get_unaligned_le32(skb->data + offset);
-
- offset += sizeof(u32);
-
- /* get the packet length */
- size = (u16) (header & 0x7ff);
- if (size != ((~header >> 16) & 0x07ff)) {
- netdev_err(dev->net, "asix_rx_fixup() Bad Header Length\n");
- return 0;
- }
-
- if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
- (size + offset > skb->len)) {
- netdev_err(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
- size);
- return 0;
- }
- ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
- if (!ax_skb)
- return 0;
-
- skb_put(ax_skb, size);
- memcpy(ax_skb->data, skb->data + offset, size);
- usbnet_skb_return(dev, ax_skb);
-
- offset += (size + 1) & 0xfffe;
- }
-
- if (skb->len != offset) {
- netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d\n",
- skb->len);
- return 0;
- }
- return 1;
-}
-
-static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
- gfp_t flags)
-{
- int padlen;
- int headroom = skb_headroom(skb);
- int tailroom = skb_tailroom(skb);
- u32 packet_len;
- u32 padbytes = 0xffff0000;
-
- padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
-
- /* We need to push 4 bytes in front of frame (packet_len)
- * and maybe add 4 bytes after the end (if padlen is 4)
- *
- * Avoid skb_copy_expand() expensive call, using following rules :
- * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
- * is false (and if we have 4 bytes of headroom)
- * - We are allowed to put 4 bytes at tail if skb_cloned()
- * is false (and if we have 4 bytes of tailroom)
- *
- * TCP packets for example are cloned, but skb_header_release()
- * was called in tcp stack, allowing us to use headroom for our needs.
- */
- if (!skb_header_cloned(skb) &&
- !(padlen && skb_cloned(skb)) &&
- headroom + tailroom >= 4 + padlen) {
- /* following should not happen, but better be safe */
- if (headroom < 4 ||
- tailroom < padlen) {
- skb->data = memmove(skb->head + 4, skb->data, skb->len);
- skb_set_tail_pointer(skb, skb->len);
- }
- } else {
- struct sk_buff *skb2;
-
- skb2 = skb_copy_expand(skb, 4, padlen, flags);
- dev_kfree_skb_any(skb);
- skb = skb2;
- if (!skb)
- return NULL;
- }
-
- packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
- skb_push(skb, 4);
- cpu_to_le32s(&packet_len);
- skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
-
- if (padlen) {
- cpu_to_le32s(&padbytes);
- memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
- skb_put(skb, sizeof(padbytes));
- }
- return skb;
-}
-
static void asix_status(struct usbnet *dev, struct urb *urb)
{
struct ax88172_int_data *event;
@@ -422,200 +64,6 @@
}
}
-static inline int asix_set_sw_mii(struct usbnet *dev)
-{
- int ret;
- ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to enable software MII access\n");
- return ret;
-}
-
-static inline int asix_set_hw_mii(struct usbnet *dev)
-{
- int ret;
- ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to enable hardware MII access\n");
- return ret;
-}
-
-static inline int asix_get_phy_addr(struct usbnet *dev)
-{
- u8 buf[2];
- int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
-
- netdev_dbg(dev->net, "asix_get_phy_addr()\n");
-
- if (ret < 0) {
- netdev_err(dev->net, "Error reading PHYID register: %02x\n", ret);
- goto out;
- }
- netdev_dbg(dev->net, "asix_get_phy_addr() returning 0x%04x\n",
- *((__le16 *)buf));
- ret = buf[1];
-
-out:
- return ret;
-}
-
-static int asix_sw_reset(struct usbnet *dev, u8 flags)
-{
- int ret;
-
- ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
-
- return ret;
-}
-
-static u16 asix_read_rx_ctl(struct usbnet *dev)
-{
- __le16 v;
- int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v);
-
- if (ret < 0) {
- netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
- goto out;
- }
- ret = le16_to_cpu(v);
-out:
- return ret;
-}
-
-static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
-{
- int ret;
-
- netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
- ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
- mode, ret);
-
- return ret;
-}
-
-static u16 asix_read_medium_status(struct usbnet *dev)
-{
- __le16 v;
- int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
-
- if (ret < 0) {
- netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
- ret);
- return ret; /* TODO: callers not checking for error ret */
- }
-
- return le16_to_cpu(v);
-
-}
-
-static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
-{
- int ret;
-
- netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
- ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
- mode, ret);
-
- return ret;
-}
-
-static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
-{
- int ret;
-
- netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
- ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
- if (ret < 0)
- netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
- value, ret);
-
- if (sleep)
- msleep(sleep);
-
- return ret;
-}
-
-/*
- * AX88772 & AX88178 have a 16-bit RX_CTL value
- */
-static void asix_set_multicast(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
- u16 rx_ctl = AX_DEFAULT_RX_CTL;
-
- if (net->flags & IFF_PROMISC) {
- rx_ctl |= AX_RX_CTL_PRO;
- } else if (net->flags & IFF_ALLMULTI ||
- netdev_mc_count(net) > AX_MAX_MCAST) {
- rx_ctl |= AX_RX_CTL_AMALL;
- } else if (netdev_mc_empty(net)) {
- /* just broadcast and directed */
- } else {
- /* We use the 20 byte dev->data
- * for our 8 byte filter buffer
- * to avoid allocating memory that
- * is tricky to free later */
- struct netdev_hw_addr *ha;
- u32 crc_bits;
-
- memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
- /* Build the multicast hash filter. */
- netdev_for_each_mc_addr(ha, net) {
- crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
- data->multi_filter[crc_bits >> 3] |=
- 1 << (crc_bits & 7);
- }
-
- asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
- AX_MCAST_FILTER_SIZE, data->multi_filter);
-
- rx_ctl |= AX_RX_CTL_AM;
- }
-
- asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
- struct usbnet *dev = netdev_priv(netdev);
- __le16 res;
-
- mutex_lock(&dev->phy_mutex);
- asix_set_sw_mii(dev);
- asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
- (__u16)loc, 2, &res);
- asix_set_hw_mii(dev);
- mutex_unlock(&dev->phy_mutex);
-
- netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
- phy_id, loc, le16_to_cpu(res));
-
- return le16_to_cpu(res);
-}
-
-static void
-asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
-{
- struct usbnet *dev = netdev_priv(netdev);
- __le16 res = cpu_to_le16(val);
-
- netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
- phy_id, loc, val);
- mutex_lock(&dev->phy_mutex);
- asix_set_sw_mii(dev);
- asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
- asix_set_hw_mii(dev);
- mutex_unlock(&dev->phy_mutex);
-}
-
/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
static u32 asix_get_phyid(struct usbnet *dev)
{
@@ -645,88 +93,6 @@
return phy_id;
}
-static void
-asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt;
-
- if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
- wolinfo->supported = 0;
- wolinfo->wolopts = 0;
- return;
- }
- wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
- wolinfo->wolopts = 0;
- if (opt & AX_MONITOR_LINK)
- wolinfo->wolopts |= WAKE_PHY;
- if (opt & AX_MONITOR_MAGIC)
- wolinfo->wolopts |= WAKE_MAGIC;
-}
-
-static int
-asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
- struct usbnet *dev = netdev_priv(net);
- u8 opt = 0;
-
- if (wolinfo->wolopts & WAKE_PHY)
- opt |= AX_MONITOR_LINK;
- if (wolinfo->wolopts & WAKE_MAGIC)
- opt |= AX_MONITOR_MAGIC;
-
- if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
- opt, 0, 0, NULL) < 0)
- return -EINVAL;
-
- return 0;
-}
-
-static int asix_get_eeprom_len(struct net_device *net)
-{
- struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
-
- return data->eeprom_len;
-}
-
-static int asix_get_eeprom(struct net_device *net,
- struct ethtool_eeprom *eeprom, u8 *data)
-{
- struct usbnet *dev = netdev_priv(net);
- __le16 *ebuf = (__le16 *)data;
- int i;
-
- /* Crude hack to ensure that we don't overwrite memory
- * if an odd length is supplied
- */
- if (eeprom->len % 2)
- return -EINVAL;
-
- eeprom->magic = AX_EEPROM_MAGIC;
-
- /* ax8817x returns 2 bytes from eeprom on read */
- for (i=0; i < eeprom->len / 2; i++) {
- if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
- eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
- return -EINVAL;
- }
- return 0;
-}
-
-static void asix_get_drvinfo (struct net_device *net,
- struct ethtool_drvinfo *info)
-{
- struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
-
- /* Inherit standard device info */
- usbnet_get_drvinfo(net, info);
- strncpy (info->driver, DRIVER_NAME, sizeof info->driver);
- strncpy (info->version, DRIVER_VERSION, sizeof info->version);
- info->eedump_len = data->eeprom_len;
-}
-
static u32 asix_get_link(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -741,30 +107,6 @@
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
-static int asix_set_mac_address(struct net_device *net, void *p)
-{
- struct usbnet *dev = netdev_priv(net);
- struct asix_data *data = (struct asix_data *)&dev->data;
- struct sockaddr *addr = p;
-
- if (netif_running(net))
- return -EBUSY;
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
-
- /* We use the 20 byte dev->data
- * for our 6 byte mac buffer
- * to avoid allocating memory that
- * is tricky to free later */
- memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
- asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
- data->mac_addr);
-
- return 0;
-}
-
/* We need to override some ethtool_ops so we require our
own structure so we don't interfere with other usbnet
devices that may be connected at the same time. */