UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
diff --git a/include/uapi/linux/rtc.h b/include/uapi/linux/rtc.h
new file mode 100644
index 0000000..f8c82e6
--- /dev/null
+++ b/include/uapi/linux/rtc.h
@@ -0,0 +1,107 @@
+/*
+ * Generic RTC interface.
+ * This version contains the part of the user interface to the Real Time Clock
+ * service. It is used with both the legacy mc146818 and also EFI
+ * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out
+ * from <linux/mc146818rtc.h> to this file for 2.4 kernels.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co.
+ * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com>
+ */
+#ifndef _UAPI_LINUX_RTC_H_
+#define _UAPI_LINUX_RTC_H_
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+
+struct rtc_time {
+ int tm_sec;
+ int tm_min;
+ int tm_hour;
+ int tm_mday;
+ int tm_mon;
+ int tm_year;
+ int tm_wday;
+ int tm_yday;
+ int tm_isdst;
+};
+
+/*
+ * This data structure is inspired by the EFI (v0.92) wakeup
+ * alarm API.
+ */
+struct rtc_wkalrm {
+ unsigned char enabled; /* 0 = alarm disabled, 1 = alarm enabled */
+ unsigned char pending; /* 0 = alarm not pending, 1 = alarm pending */
+ struct rtc_time time; /* time the alarm is set to */
+};
+
+/*
+ * Data structure to control PLL correction some better RTC feature
+ * pll_value is used to get or set current value of correction,
+ * the rest of the struct is used to query HW capabilities.
+ * This is modeled after the RTC used in Q40/Q60 computers but
+ * should be sufficiently flexible for other devices
+ *
+ * +ve pll_value means clock will run faster by
+ * pll_value*pll_posmult/pll_clock
+ * -ve pll_value means clock will run slower by
+ * pll_value*pll_negmult/pll_clock
+ */
+
+struct rtc_pll_info {
+ int pll_ctrl; /* placeholder for fancier control */
+ int pll_value; /* get/set correction value */
+ int pll_max; /* max +ve (faster) adjustment value */
+ int pll_min; /* max -ve (slower) adjustment value */
+ int pll_posmult; /* factor for +ve correction */
+ int pll_negmult; /* factor for -ve correction */
+ long pll_clock; /* base PLL frequency */
+};
+
+/*
+ * ioctl calls that are permitted to the /dev/rtc interface, if
+ * any of the RTC drivers are enabled.
+ */
+
+#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */
+#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */
+#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */
+#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */
+#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */
+#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */
+#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */
+#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */
+
+#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */
+#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */
+#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */
+#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */
+#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */
+#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */
+#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */
+#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */
+
+#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
+#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
+
+#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */
+#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */
+
+#define RTC_VL_READ _IOR('p', 0x13, int) /* Voltage low detector */
+#define RTC_VL_CLR _IO('p', 0x14) /* Clear voltage low information */
+
+/* interrupt flags */
+#define RTC_IRQF 0x80 /* Any of the following is active */
+#define RTC_PF 0x40 /* Periodic interrupt */
+#define RTC_AF 0x20 /* Alarm interrupt */
+#define RTC_UF 0x10 /* Update interrupt for 1Hz RTC */
+
+
+#define RTC_MAX_FREQ 8192
+
+
+#endif /* _UAPI_LINUX_RTC_H_ */