commit 60d0da5168349041b167973c7464ba0815d5fd67
author Valentin Rothberg <valentinrothberg@gmail.com> Sun Apr 12 17:54:35 2015 +0200
committer Greg Kroah-Hartman <gregkh@linuxfoundation.org> Wed May 06 22:26:59 2015 +0200
tree de63e6c7a07d2cc4061cf88b2b0af8166036205b
parent 5b84c967ccf0573ee4a0b2a53720d5e1e4a8c0f8

serial: bfin: ctsrts: enfore Kconfig naming convention

The CONFIG_ prefix is reserved for Kconfig options in Make and CPP
syntax; static analysis tools rely on this convention.  This patch
enforces this behavior for SERIAL_BFIN_{HARD_}CTSRTS.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/bfin_uart.c

diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 155781e..ae3cf94 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -74,8 +74,8 @@
 
 static void bfin_serial_reset_irda(struct uart_port *port);
 
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -110,7 +110,7 @@
 	struct bfin_serial_port *uart = dev_id;
 	struct uart_port *uport = &uart->port;
 	unsigned int status = bfin_serial_get_mctrl(uport);
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 
 	UART_CLEAR_SCTS(uart);
 	if (uport->hw_stopped) {
@@ -700,7 +700,7 @@
 # endif
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
 		if (request_irq(gpio_to_irq(uart->cts_pin),
 			bfin_serial_mctrl_cts_int,
@@ -718,7 +718,7 @@
 			gpio_direction_output(uart->rts_pin, 0);
 	}
 #endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0) {
 		if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
 			0, "BFIN_UART_MODEM_STATUS", uart)) {
@@ -766,13 +766,13 @@
 	free_irq(uart->tx_irq, uart);
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0)
 		free_irq(gpio_to_irq(uart->cts_pin), uart);
 	if (uart->rts_pin >= 0)
 		gpio_free(uart->rts_pin);
 #endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
 	if (uart->cts_pin >= 0)
 		free_irq(uart->status_irq, uart);
 #endif
@@ -788,7 +788,7 @@
 	unsigned int ier, lcr = 0;
 	unsigned long timeout;
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
 	if (old == NULL && uart->cts_pin != -1)
 		termios->c_cflag |= CRTSCTS;
 	else if (uart->cts_pin == -1)
@@ -1110,8 +1110,8 @@
 	int baud = 57600;
 	int bits = 8;
 	int parity = 'n';
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+# if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 	int flow = 'r';
 # else
 	int flow = 'n';
@@ -1322,8 +1322,8 @@
 		init_timer(&(uart->rx_dma_timer));
 #endif
 
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
-	defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+	defined(SERIAL_BFIN_HARD_CTSRTS)
 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 		if (res == NULL)
 			uart->cts_pin = -1;