of: Always use 'struct device.of_node' to get device node pointer.
The following structure elements duplicate the information in
'struct device.of_node' and so are being eliminated. This patch
makes all readers of these elements use device.of_node instead.
(struct of_device *)->node
(struct dev_archdata *)->prom_node (sparc)
(struct dev_archdata *)->of_node (powerpc & microblaze)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index dd873cc..cda2ba8 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -136,7 +136,8 @@
EMAC_FTR_440EP_PHY_CLK_FIX))
DBG(dev, "%s" NL, error);
else if (net_ratelimit())
- printk(KERN_ERR "%s: %s\n", dev->ofdev->node->full_name, error);
+ printk(KERN_ERR "%s: %s\n", dev->ofdev->dev.of_node->full_name,
+ error);
}
/* EMAC PHY clock workaround:
@@ -2185,7 +2186,7 @@
strcpy(info->version, DRV_VERSION);
info->fw_version[0] = '\0';
sprintf(info->bus_info, "PPC 4xx EMAC-%d %s",
- dev->cell_index, dev->ofdev->node->full_name);
+ dev->cell_index, dev->ofdev->dev.of_node->full_name);
info->regdump_len = emac_ethtool_get_regs_len(ndev);
}
@@ -2379,7 +2380,7 @@
static int __devinit emac_init_phy(struct emac_instance *dev)
{
- struct device_node *np = dev->ofdev->node;
+ struct device_node *np = dev->ofdev->dev.of_node;
struct net_device *ndev = dev->ndev;
u32 phy_map, adv;
int i;
@@ -2514,7 +2515,7 @@
static int __devinit emac_init_config(struct emac_instance *dev)
{
- struct device_node *np = dev->ofdev->node;
+ struct device_node *np = dev->ofdev->dev.of_node;
const void *p;
unsigned int plen;
const char *pm, *phy_modes[] = {
@@ -2723,7 +2724,7 @@
{
struct net_device *ndev;
struct emac_instance *dev;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct device_node **blist = NULL;
int err, i;
@@ -2810,7 +2811,7 @@
err = mal_register_commac(dev->mal, &dev->commac);
if (err) {
printk(KERN_ERR "%s: failed to register with mal %s!\n",
- np->full_name, dev->mal_dev->node->full_name);
+ np->full_name, dev->mal_dev->dev.of_node->full_name);
goto err_rel_deps;
}
dev->rx_skb_size = emac_rx_skb_size(ndev->mtu);
diff --git a/drivers/net/ibm_newemac/debug.c b/drivers/net/ibm_newemac/debug.c
index 775c850..3995faf 100644
--- a/drivers/net/ibm_newemac/debug.c
+++ b/drivers/net/ibm_newemac/debug.c
@@ -33,7 +33,7 @@
int i;
printk("** EMAC %s TX BDs **\n"
" tx_cnt = %d tx_slot = %d ack_slot = %d\n",
- p->ofdev->node->full_name,
+ p->ofdev->dev.of_node->full_name,
p->tx_cnt, p->tx_slot, p->ack_slot);
for (i = 0; i < NUM_TX_BUFF / 2; ++i)
printk
@@ -49,7 +49,7 @@
printk("** EMAC %s RX BDs **\n"
" rx_slot = %d flags = 0x%lx rx_skb_size = %d rx_sync_size = %d\n"
" rx_sg_skb = 0x%p\n",
- p->ofdev->node->full_name,
+ p->ofdev->dev.of_node->full_name,
p->rx_slot, p->commac.flags, p->rx_skb_size,
p->rx_sync_size, p->rx_sg_skb);
for (i = 0; i < NUM_RX_BUFF / 2; ++i)
@@ -77,7 +77,8 @@
"MR0 = 0x%08x MR1 = 0x%08x TMR0 = 0x%08x TMR1 = 0x%08x\n"
"RMR = 0x%08x ISR = 0x%08x ISER = 0x%08x\n"
"IAR = %04x%08x VTPID = 0x%04x VTCI = 0x%04x\n",
- dev->ofdev->node->full_name, in_be32(&p->mr0), in_be32(&p->mr1),
+ dev->ofdev->dev.of_node->full_name,
+ in_be32(&p->mr0), in_be32(&p->mr1),
in_be32(&p->tmr0), in_be32(&p->tmr1),
in_be32(&p->rmr), in_be32(&p->isr), in_be32(&p->iser),
in_be32(&p->iahr), in_be32(&p->ialr), in_be32(&p->vtpid),
@@ -128,7 +129,7 @@
"CFG = 0x%08x ESR = 0x%08x IER = 0x%08x\n"
"TX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n"
"RX|CASR = 0x%08x CARR = 0x%08x EOBISR = 0x%08x DEIR = 0x%08x\n",
- mal->ofdev->node->full_name,
+ mal->ofdev->dev.of_node->full_name,
get_mal_dcrn(mal, MAL_CFG), get_mal_dcrn(mal, MAL_ESR),
get_mal_dcrn(mal, MAL_IER),
get_mal_dcrn(mal, MAL_TXCASR), get_mal_dcrn(mal, MAL_TXCARR),
diff --git a/drivers/net/ibm_newemac/debug.h b/drivers/net/ibm_newemac/debug.h
index b631842..e596c77 100644
--- a/drivers/net/ibm_newemac/debug.h
+++ b/drivers/net/ibm_newemac/debug.h
@@ -53,8 +53,8 @@
#endif
-#define EMAC_DBG(dev, name, fmt, arg...) \
- printk(KERN_DEBUG #name "%s: " fmt, dev->ofdev->node->full_name, ## arg)
+#define EMAC_DBG(d, name, fmt, arg...) \
+ printk(KERN_DEBUG #name "%s: " fmt, d->ofdev->dev.of_node->full_name, ## arg)
#if DBG_LEVEL > 0
# define DBG(d,f,x...) EMAC_DBG(d, emac, f, ##x)
diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index 5b3d944..aba1794 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -538,11 +538,11 @@
}
mal->index = index;
mal->ofdev = ofdev;
- mal->version = of_device_is_compatible(ofdev->node, "ibm,mcmal2") ? 2 : 1;
+ mal->version = of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal2") ? 2 : 1;
MAL_DBG(mal, "probe" NL);
- prop = of_get_property(ofdev->node, "num-tx-chans", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "num-tx-chans", NULL);
if (prop == NULL) {
printk(KERN_ERR
"mal%d: can't find MAL num-tx-chans property!\n",
@@ -552,7 +552,7 @@
}
mal->num_tx_chans = prop[0];
- prop = of_get_property(ofdev->node, "num-rx-chans", NULL);
+ prop = of_get_property(ofdev->dev.of_node, "num-rx-chans", NULL);
if (prop == NULL) {
printk(KERN_ERR
"mal%d: can't find MAL num-rx-chans property!\n",
@@ -562,14 +562,14 @@
}
mal->num_rx_chans = prop[0];
- dcr_base = dcr_resource_start(ofdev->node, 0);
+ dcr_base = dcr_resource_start(ofdev->dev.of_node, 0);
if (dcr_base == 0) {
printk(KERN_ERR
"mal%d: can't find DCR resource!\n", index);
err = -ENODEV;
goto fail;
}
- mal->dcr_host = dcr_map(ofdev->node, dcr_base, 0x100);
+ mal->dcr_host = dcr_map(ofdev->dev.of_node, dcr_base, 0x100);
if (!DCR_MAP_OK(mal->dcr_host)) {
printk(KERN_ERR
"mal%d: failed to map DCRs !\n", index);
@@ -577,28 +577,28 @@
goto fail;
}
- if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) {
+ if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-405ez")) {
#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \
defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR)
mal->features |= (MAL_FTR_CLEAR_ICINTSTAT |
MAL_FTR_COMMON_ERR_INT);
#else
printk(KERN_ERR "%s: Support for 405EZ not enabled!\n",
- ofdev->node->full_name);
+ ofdev->dev.of_node->full_name);
err = -ENODEV;
goto fail;
#endif
}
- mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0);
- mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1);
- mal->serr_irq = irq_of_parse_and_map(ofdev->node, 2);
+ mal->txeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+ mal->rxeob_irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
+ mal->serr_irq = irq_of_parse_and_map(ofdev->dev.of_node, 2);
if (mal_has_feature(mal, MAL_FTR_COMMON_ERR_INT)) {
mal->txde_irq = mal->rxde_irq = mal->serr_irq;
} else {
- mal->txde_irq = irq_of_parse_and_map(ofdev->node, 3);
- mal->rxde_irq = irq_of_parse_and_map(ofdev->node, 4);
+ mal->txde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 3);
+ mal->rxde_irq = irq_of_parse_and_map(ofdev->dev.of_node, 4);
}
if (mal->txeob_irq == NO_IRQ || mal->rxeob_irq == NO_IRQ ||
@@ -629,7 +629,7 @@
/* Current Axon is not happy with priority being non-0, it can
* deadlock, fix it up here
*/
- if (of_device_is_compatible(ofdev->node, "ibm,mcmal-axon"))
+ if (of_device_is_compatible(ofdev->dev.of_node, "ibm,mcmal-axon"))
cfg &= ~(MAL2_CFG_RPP_10 | MAL2_CFG_WPP_10);
/* Apply configuration */
@@ -701,7 +701,7 @@
printk(KERN_INFO
"MAL v%d %s, %d TX channels, %d RX channels\n",
- mal->version, ofdev->node->full_name,
+ mal->version, ofdev->dev.of_node->full_name,
mal->num_tx_chans, mal->num_rx_chans);
/* Advertise this instance to the rest of the world */
diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c
index 5b90d34..6ab630a 100644
--- a/drivers/net/ibm_newemac/rgmii.c
+++ b/drivers/net/ibm_newemac/rgmii.c
@@ -103,7 +103,7 @@
/* Check if we need to attach to a RGMII */
if (input < 0 || !rgmii_valid_mode(mode)) {
printk(KERN_ERR "%s: unsupported settings !\n",
- ofdev->node->full_name);
+ ofdev->dev.of_node->full_name);
return -ENODEV;
}
@@ -113,7 +113,7 @@
out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
printk(KERN_NOTICE "%s: input %d in %s mode\n",
- ofdev->node->full_name, input, rgmii_mode_name(mode));
+ ofdev->dev.of_node->full_name, input, rgmii_mode_name(mode));
++dev->users;
@@ -231,7 +231,7 @@
static int __devinit rgmii_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct rgmii_instance *dev;
struct resource regs;
int rc;
@@ -264,11 +264,11 @@
}
/* Check for RGMII flags */
- if (of_get_property(ofdev->node, "has-mdio", NULL))
+ if (of_get_property(ofdev->dev.of_node, "has-mdio", NULL))
dev->flags |= EMAC_RGMII_FLAG_HAS_MDIO;
/* CAB lacks the right properties, fix this up */
- if (of_device_is_compatible(ofdev->node, "ibm,rgmii-axon"))
+ if (of_device_is_compatible(ofdev->dev.of_node, "ibm,rgmii-axon"))
dev->flags |= EMAC_RGMII_FLAG_HAS_MDIO;
DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n",
@@ -279,7 +279,7 @@
printk(KERN_INFO
"RGMII %s initialized with%s MDIO support\n",
- ofdev->node->full_name,
+ ofdev->dev.of_node->full_name,
(dev->flags & EMAC_RGMII_FLAG_HAS_MDIO) ? "" : "out");
wmb();
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c
index 30173a9..4f64b00 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ibm_newemac/tah.c
@@ -57,7 +57,8 @@
--n;
if (unlikely(!n))
- printk(KERN_ERR "%s: reset timeout\n", ofdev->node->full_name);
+ printk(KERN_ERR "%s: reset timeout\n",
+ ofdev->dev.of_node->full_name);
/* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
out_be32(&p->mr,
@@ -89,7 +90,7 @@
static int __devinit tah_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct tah_instance *dev;
struct resource regs;
int rc;
@@ -127,7 +128,7 @@
tah_reset(ofdev);
printk(KERN_INFO
- "TAH %s initialized\n", ofdev->node->full_name);
+ "TAH %s initialized\n", ofdev->dev.of_node->full_name);
wmb();
return 0;
diff --git a/drivers/net/ibm_newemac/zmii.c b/drivers/net/ibm_newemac/zmii.c
index 1f038f8..b4fa823 100644
--- a/drivers/net/ibm_newemac/zmii.c
+++ b/drivers/net/ibm_newemac/zmii.c
@@ -121,13 +121,14 @@
dev->mode = *mode;
printk(KERN_NOTICE "%s: bridge in %s mode\n",
- ofdev->node->full_name, zmii_mode_name(dev->mode));
+ ofdev->dev.of_node->full_name,
+ zmii_mode_name(dev->mode));
} else {
/* All inputs must use the same mode */
if (*mode != PHY_MODE_NA && *mode != dev->mode) {
printk(KERN_ERR
"%s: invalid mode %d specified for input %d\n",
- ofdev->node->full_name, *mode, input);
+ ofdev->dev.of_node->full_name, *mode, input);
mutex_unlock(&dev->lock);
return -EINVAL;
}
@@ -233,7 +234,7 @@
static int __devinit zmii_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
struct zmii_instance *dev;
struct resource regs;
int rc;
@@ -273,7 +274,7 @@
out_be32(&dev->base->fer, 0);
printk(KERN_INFO
- "ZMII %s initialized\n", ofdev->node->full_name);
+ "ZMII %s initialized\n", ofdev->dev.of_node->full_name);
wmb();
dev_set_drvdata(&ofdev->dev, dev);