hwmon: Clearly mark ACPI drivers as such
Now that we have ACPI-based hardware monitoring drivers, and we will
start telling users to use them instead of native drivers when I/O
resources conflict, I think it would be good to clearly mark ACPI
drivers as such in Kconfig.
Also, in the case of monolithic kernels, I think the ACPI drivers
should take precedence over native drivers, so they should be listed
first in Makefile.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Luca Tettamanti <kronos.it@gmail.com>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index ee57a4a..461abb1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -28,6 +28,17 @@
tristate
default n
+config HWMON_DEBUG_CHIP
+ bool "Hardware Monitoring Chip debugging messages"
+ default n
+ help
+ Say Y here if you want the I2C chip drivers to produce a bunch of
+ debug messages to the system log. Select this if you are having
+ a problem with I2C support and want to see more of what is going
+ on.
+
+comment "Native drivers"
+
config SENSORS_ABITUGURU
tristate "Abit uGuru (rev 1 & 2)"
depends on X86 && EXPERIMENTAL
@@ -248,18 +259,6 @@
This driver can also be built as a module. If so, the module
will be called asb100.
-config SENSORS_ATK0110
- tristate "ASUS ATK0110 ACPI hwmon"
- depends on X86 && ACPI && EXPERIMENTAL
- help
- If you say yes here you get support for the ACPI hardware
- monitoring interface found in many ASUS motherboards. This
- driver will provide readings of fans, voltages and temperatures
- through the system firmware.
-
- This driver can also be built as a module. If so, the module
- will be called asus_atk0110.
-
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
depends on I2C && EXPERIMENTAL
@@ -974,34 +973,6 @@
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
-config SENSORS_LIS3LV02D
- tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
- depends on ACPI && INPUT
- select INPUT_POLLDEV
- select NEW_LEDS
- select LEDS_CLASS
- default n
- help
- This driver provides support for the LIS3LV02Dx accelerometer. In
- particular, it can be found in a number of HP laptops, which have the
- "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
- systems the driver should load automatically (via ACPI). The
- accelerometer might also be found in other systems, connected via SPI
- or I2C. The accelerometer data is readable via
- /sys/devices/platform/lis3lv02d.
-
- This driver also provides an absolute input class device, allowing
- the laptop to act as a pinball machine-esque joystick. On HP laptops,
- if the led infrastructure is activated, support for a led indicating
- disk protection will be provided as hp:red:hddprotection.
-
- This driver can also be built as modules. If so, the core module
- will be called lis3lv02d and a specific module for HP laptops will be
- called hp_accel.
-
- Say Y here if you have an applicable laptop and want to experience
- the awesome power of lis3lv02d.
-
config SENSORS_LIS3_SPI
tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
depends on !ACPI && SPI_MASTER && INPUT
@@ -1044,13 +1015,50 @@
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
-config HWMON_DEBUG_CHIP
- bool "Hardware Monitoring Chip debugging messages"
+if ACPI
+
+comment "ACPI drivers"
+
+config SENSORS_ATK0110
+ tristate "ASUS ATK0110"
+ depends on X86 && EXPERIMENTAL
+ help
+ If you say yes here you get support for the ACPI hardware
+ monitoring interface found in many ASUS motherboards. This
+ driver will provide readings of fans, voltages and temperatures
+ through the system firmware.
+
+ This driver can also be built as a module. If so, the module
+ will be called asus_atk0110.
+
+config SENSORS_LIS3LV02D
+ tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
+ depends on INPUT
+ select INPUT_POLLDEV
+ select NEW_LEDS
+ select LEDS_CLASS
default n
help
- Say Y here if you want the I2C chip drivers to produce a bunch of
- debug messages to the system log. Select this if you are having
- a problem with I2C support and want to see more of what is going
- on.
+ This driver provides support for the LIS3LV02Dx accelerometer. In
+ particular, it can be found in a number of HP laptops, which have the
+ "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such
+ systems the driver should load automatically (via ACPI). The
+ accelerometer might also be found in other systems, connected via SPI
+ or I2C. The accelerometer data is readable via
+ /sys/devices/platform/lis3lv02d.
+
+ This driver also provides an absolute input class device, allowing
+ the laptop to act as a pinball machine-esque joystick. On HP laptops,
+ if the led infrastructure is activated, support for a led indicating
+ disk protection will be provided as hp:red:hddprotection.
+
+ This driver can also be built as modules. If so, the core module
+ will be called lis3lv02d and a specific module for HP laptops will be
+ called hp_accel.
+
+ Say Y here if you have an applicable laptop and want to experience
+ the awesome power of lis3lv02d.
+
+endif # ACPI
endif # HWMON
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b577b49..2e54788 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -5,6 +5,10 @@
obj-$(CONFIG_HWMON) += hwmon.o
obj-$(CONFIG_HWMON_VID) += hwmon-vid.o
+# APCI drivers
+obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
+
+# Native drivers
# asb100, then w83781d go first, as they can override other drivers' addresses.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
@@ -29,10 +33,8 @@
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
-
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_AMS) += ams/
-obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o