Merge branches 'dma40', 'pl08x', 'fsldma', 'imx' and 'intel-mid' into dmaengine
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 9280d25..58b3e72 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -193,7 +193,6 @@
.memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
.memcpy_conf_phy = &dma40_memcpy_conf_phy,
.memcpy_conf_log = &dma40_memcpy_conf_log,
- .llis_per_log = 8,
.disabled_channels = {-1},
};
diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
index 5fbde4b..3dd4255 100644
--- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h
+++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h
@@ -1,10 +1,8 @@
/*
- * arch/arm/plat-nomadik/include/plat/ste_dma40.h
- *
- * Copyright (C) ST-Ericsson 2007-2010
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
@@ -73,6 +71,9 @@
#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16
+/* Maximum number of possible physical channels */
+#define STEDMA40_MAX_PHYS 32
+
enum stedma40_flow_ctrl {
STEDMA40_NO_FLOW_CTRL,
STEDMA40_FLOW_CTRL,
@@ -90,6 +91,22 @@
STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
};
+enum stedma40_xfer_dir {
+ STEDMA40_MEM_TO_MEM = 1,
+ STEDMA40_MEM_TO_PERIPH,
+ STEDMA40_PERIPH_TO_MEM,
+ STEDMA40_PERIPH_TO_PERIPH
+};
+
+
+/**
+ * struct stedma40_chan_cfg - dst/src channel configuration
+ *
+ * @endianess: Endianess of the src/dst hardware
+ * @data_width: Data width of the src/dst hardware
+ * @p_size: Burst size
+ * @flow_ctrl: Flow control on/off.
+ */
struct stedma40_half_channel_info {
enum stedma40_endianess endianess;
enum stedma40_periph_data_width data_width;
@@ -97,14 +114,6 @@
enum stedma40_flow_ctrl flow_ctrl;
};
-enum stedma40_xfer_dir {
- STEDMA40_MEM_TO_MEM,
- STEDMA40_MEM_TO_PERIPH,
- STEDMA40_PERIPH_TO_MEM,
- STEDMA40_PERIPH_TO_PERIPH
-};
-
-
/**
* struct stedma40_chan_cfg - Structure to be filled by client drivers.
*
@@ -114,10 +123,6 @@
* @dst_dev_type: Dst device type
* @src_info: Parameters for dst half channel
* @dst_info: Parameters for dst half channel
- * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
- * @pre_transfer: Callback used if needed before preparation of transfer.
- * Only called if device is set. size of bytes to transfer
- * (in case of multiple element transfer size is size of the first element).
*
*
* This structure has to be filled by the client drivers.
@@ -131,10 +136,6 @@
int dst_dev_type;
struct stedma40_half_channel_info src_info;
struct stedma40_half_channel_info dst_info;
- void *pre_transfer_data;
- int (*pre_transfer) (struct dma_chan *chan,
- void *data,
- int size);
};
/**
@@ -147,7 +148,6 @@
* @memcpy_len: length of memcpy
* @memcpy_conf_phy: default configuration of physical channel memcpy
* @memcpy_conf_log: default configuration of logical channel memcpy
- * @llis_per_log: number of max linked list items per logical channel
* @disabled_channels: A vector, ending with -1, that marks physical channels
* that are for different reasons not available for the driver.
*/
@@ -159,23 +159,10 @@
u32 memcpy_len;
struct stedma40_chan_cfg *memcpy_conf_phy;
struct stedma40_chan_cfg *memcpy_conf_log;
- unsigned int llis_per_log;
- int disabled_channels[8];
+ int disabled_channels[STEDMA40_MAX_PHYS];
};
-/**
- * setdma40_set_psize() - Used for changing the package size of an
- * already configured dma channel.
- *
- * @chan: dmaengine handle
- * @src_psize: new package side for src. (STEDMA40_PSIZE*)
- * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
- *
- * returns 0 on ok, otherwise negative error number.
- */
-int stedma40_set_psize(struct dma_chan *chan,
- int src_psize,
- int dst_psize);
+#ifdef CONFIG_STE_DMA40
/**
* stedma40_filter() - Provides stedma40_chan_cfg to the
@@ -238,4 +225,21 @@
direction, flags);
}
+#else
+static inline bool stedma40_filter(struct dma_chan *chan, void *data)
+{
+ return false;
+}
+
+static inline struct
+dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
+ dma_addr_t addr,
+ unsigned int size,
+ enum dma_data_direction direction,
+ unsigned long flags)
+{
+ return NULL;
+}
+#endif
+
#endif
diff --git a/arch/powerpc/include/asm/fsldma.h b/arch/powerpc/include/asm/fsldma.h
deleted file mode 100644
index debc5ed..0000000
--- a/arch/powerpc/include/asm/fsldma.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Freescale MPC83XX / MPC85XX DMA Controller
- *
- * Copyright (c) 2009 Ira W. Snyder <iws@ovro.caltech.edu>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
-#define __ARCH_POWERPC_ASM_FSLDMA_H__
-
-#include <linux/slab.h>
-#include <linux/dmaengine.h>
-
-/*
- * Definitions for the Freescale DMA controller's DMA_SLAVE implemention
- *
- * The Freescale DMA_SLAVE implementation was designed to handle many-to-many
- * transfers. An example usage would be an accelerated copy between two
- * scatterlists. Another example use would be an accelerated copy from
- * multiple non-contiguous device buffers into a single scatterlist.
- *
- * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This
- * structure contains a list of hardware addresses that should be copied
- * to/from the scatterlist passed into device_prep_slave_sg(). The structure
- * also has some fields to enable hardware-specific features.
- */
-
-/**
- * struct fsl_dma_hw_addr
- * @entry: linked list entry
- * @address: the hardware address
- * @length: length to transfer
- *
- * Holds a single physical hardware address / length pair for use
- * with the DMAEngine DMA_SLAVE API.
- */
-struct fsl_dma_hw_addr {
- struct list_head entry;
-
- dma_addr_t address;
- size_t length;
-};
-
-/**
- * struct fsl_dma_slave
- * @addresses: a linked list of struct fsl_dma_hw_addr structures
- * @request_count: value for DMA request count
- * @src_loop_size: setup and enable constant source-address DMA transfers
- * @dst_loop_size: setup and enable constant destination address DMA transfers
- * @external_start: enable externally started DMA transfers
- * @external_pause: enable externally paused DMA transfers
- *
- * Holds a list of address / length pairs for use with the DMAEngine
- * DMA_SLAVE API implementation for the Freescale DMA controller.
- */
-struct fsl_dma_slave {
-
- /* List of hardware address/length pairs */
- struct list_head addresses;
-
- /* Support for extra controller features */
- unsigned int request_count;
- unsigned int src_loop_size;
- unsigned int dst_loop_size;
- bool external_start;
- bool external_pause;
-};
-
-/**
- * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave
- * @slave: the &struct fsl_dma_slave to add to
- * @address: the hardware address to add
- * @length: the length of bytes to transfer from @address
- *
- * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on
- * success, -ERRNO otherwise.
- */
-static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave,
- dma_addr_t address, size_t length)
-{
- struct fsl_dma_hw_addr *addr;
-
- addr = kzalloc(sizeof(*addr), GFP_ATOMIC);
- if (!addr)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&addr->entry);
- addr->address = address;
- addr->length = length;
-
- list_add_tail(&addr->entry, &slave->addresses);
- return 0;
-}
-
-/**
- * fsl_dma_slave_free - free a struct fsl_dma_slave
- * @slave: the struct fsl_dma_slave to free
- *
- * Free a struct fsl_dma_slave and all associated address/length pairs
- */
-static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave)
-{
- struct fsl_dma_hw_addr *addr, *tmp;
-
- if (slave) {
- list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) {
- list_del(&addr->entry);
- kfree(addr);
- }
-
- kfree(slave);
- }
-}
-
-/**
- * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave
- * @gfp: the flags to pass to kmalloc when allocating this structure
- *
- * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new
- * struct fsl_dma_slave on success, or NULL on failure.
- */
-static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp)
-{
- struct fsl_dma_slave *slave;
-
- slave = kzalloc(sizeof(*slave), gfp);
- if (!slave)
- return NULL;
-
- INIT_LIST_HEAD(&slave->addresses);
- return slave;
-}
-
-#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e0e1f40..ab28f60 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -49,6 +49,14 @@
config ASYNC_TX_DISABLE_CHANNEL_SWITCH
bool
+config AMBA_PL08X
+ bool "ARM PrimeCell PL080 or PL081 support"
+ depends on ARM_AMBA && EXPERIMENTAL
+ select DMA_ENGINE
+ help
+ Platform has a PL08x DMAC device
+ which can provide DMA engine support
+
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 79ac75b..a8a84f4 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -27,3 +27,4 @@
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PCH_DMA) += pch_dma.o
+obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
new file mode 100644
index 0000000..b605cc9
--- /dev/null
+++ b/drivers/dma/amba-pl08x.c
@@ -0,0 +1,2167 @@
+/*
+ * Copyright (c) 2006 ARM Ltd.
+ * Copyright (c) 2010 ST-Ericsson SA
+ *
+ * Author: Peter Pearse <peter.pearse@arm.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is iin this distribution in the
+ * file called COPYING.
+ *
+ * Documentation: ARM DDI 0196G == PL080
+ * Documentation: ARM DDI 0218E == PL081
+ *
+ * PL080 & PL081 both have 16 sets of DMA signals that can be routed to
+ * any channel.
+ *
+ * The PL080 has 8 channels available for simultaneous use, and the PL081
+ * has only two channels. So on these DMA controllers the number of channels
+ * and the number of incoming DMA signals are two totally different things.
+ * It is usually not possible to theoretically handle all physical signals,
+ * so a multiplexing scheme with possible denial of use is necessary.
+ *
+ * The PL080 has a dual bus master, PL081 has a single master.
+ *
+ * Memory to peripheral transfer may be visualized as
+ * Get data from memory to DMAC
+ * Until no data left
+ * On burst request from peripheral
+ * Destination burst from DMAC to peripheral
+ * Clear burst request
+ * Raise terminal count interrupt
+ *
+ * For peripherals with a FIFO:
+ * Source burst size == half the depth of the peripheral FIFO
+ * Destination burst size == the depth of the peripheral FIFO
+ *
+ * (Bursts are irrelevant for mem to mem transfers - there are no burst
+ * signals, the DMA controller will simply facilitate its AHB master.)
+ *
+ * ASSUMES default (little) endianness for DMA transfers
+ *
+ * Only DMAC flow control is implemented
+ *
+ * Global TODO:
+ * - Break out common code from arch/arm/mach-s3c64xx and share
+ */
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/dmapool.h>
+#include <linux/amba/bus.h>
+#include <linux/dmaengine.h>
+#include <linux/amba/pl08x.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/hardware/pl080.h>
+#include <asm/dma.h>
+#include <asm/mach/dma.h>
+#include <asm/atomic.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+
+#define DRIVER_NAME "pl08xdmac"
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL08x derivates
+ * @name: the name of this specific variant
+ * @channels: the number of channels available in this variant
+ * @dualmaster: whether this version supports dual AHB masters
+ * or not.
+ */
+struct vendor_data {
+ char *name;
+ u8 channels;
+ bool dualmaster;
+};
+
+/*
+ * PL08X private data structures
+ * An LLI struct - see pl08x TRM
+ * Note that next uses bit[0] as a bus bit,
+ * start & end do not - their bus bit info
+ * is in cctl
+ */
+struct lli {
+ dma_addr_t src;
+ dma_addr_t dst;
+ dma_addr_t next;
+ u32 cctl;
+};
+
+/**
+ * struct pl08x_driver_data - the local state holder for the PL08x
+ * @slave: slave engine for this instance
+ * @memcpy: memcpy engine for this instance
+ * @base: virtual memory base (remapped) for the PL08x
+ * @adev: the corresponding AMBA (PrimeCell) bus entry
+ * @vd: vendor data for this PL08x variant
+ * @pd: platform data passed in from the platform/machine
+ * @phy_chans: array of data for the physical channels
+ * @pool: a pool for the LLI descriptors
+ * @pool_ctr: counter of LLIs in the pool
+ * @lock: a spinlock for this struct
+ */
+struct pl08x_driver_data {
+ struct dma_device slave;
+ struct dma_device memcpy;
+ void __iomem *base;
+ struct amba_device *adev;
+ struct vendor_data *vd;
+ struct pl08x_platform_data *pd;
+ struct pl08x_phy_chan *phy_chans;
+ struct dma_pool *pool;
+ int pool_ctr;
+ spinlock_t lock;
+};
+
+/*
+ * PL08X specific defines
+ */
+
+/*
+ * Memory boundaries: the manual for PL08x says that the controller
+ * cannot read past a 1KiB boundary, so these defines are used to
+ * create transfer LLIs that do not cross such boundaries.
+ */
+#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */
+#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT)
+
+/* Minimum period between work queue runs */
+#define PL08X_WQ_PERIODMIN 20
+
+/* Size (bytes) of each LLI buffer allocated for one transfer */
+# define PL08X_LLI_TSFR_SIZE 0x2000
+
+/* Maximimum times we call dma_pool_alloc on this pool without freeing */
+#define PL08X_MAX_ALLOCS 0x40
+#define MAX_NUM_TSFR_LLIS (PL08X_LLI_TSFR_SIZE/sizeof(struct lli))
+#define PL08X_ALIGN 8
+
+static inline struct pl08x_dma_chan *to_pl08x_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct pl08x_dma_chan, chan);
+}
+
+/*
+ * Physical channel handling
+ */
+
+/* Whether a certain channel is busy or not */
+static int pl08x_phy_channel_busy(struct pl08x_phy_chan *ch)
+{
+ unsigned int val;
+
+ val = readl(ch->base + PL080_CH_CONFIG);
+ return val & PL080_CONFIG_ACTIVE;
+}
+
+/*
+ * Set the initial DMA register values i.e. those for the first LLI
+ * The next lli pointer and the configuration interrupt bit have
+ * been set when the LLIs were constructed
+ */
+static void pl08x_set_cregs(struct pl08x_driver_data *pl08x,
+ struct pl08x_phy_chan *ch)
+{
+ /* Wait for channel inactive */
+ while (pl08x_phy_channel_busy(ch))
+ ;
+
+ dev_vdbg(&pl08x->adev->dev,
+ "WRITE channel %d: csrc=%08x, cdst=%08x, "
+ "cctl=%08x, clli=%08x, ccfg=%08x\n",
+ ch->id,
+ ch->csrc,
+ ch->cdst,
+ ch->cctl,
+ ch->clli,
+ ch->ccfg);
+
+ writel(ch->csrc, ch->base + PL080_CH_SRC_ADDR);
+ writel(ch->cdst, ch->base + PL080_CH_DST_ADDR);
+ writel(ch->clli, ch->base + PL080_CH_LLI);
+ writel(ch->cctl, ch->base + PL080_CH_CONTROL);
+ writel(ch->ccfg, ch->base + PL080_CH_CONFIG);
+}
+
+static inline void pl08x_config_phychan_for_txd(struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_channel_data *cd = plchan->cd;
+ struct pl08x_phy_chan *phychan = plchan->phychan;
+ struct pl08x_txd *txd = plchan->at;
+
+ /* Copy the basic control register calculated at transfer config */
+ phychan->csrc = txd->csrc;
+ phychan->cdst = txd->cdst;
+ phychan->clli = txd->clli;
+ phychan->cctl = txd->cctl;
+
+ /* Assign the signal to the proper control registers */
+ phychan->ccfg = cd->ccfg;
+ phychan->ccfg &= ~PL080_CONFIG_SRC_SEL_MASK;
+ phychan->ccfg &= ~PL080_CONFIG_DST_SEL_MASK;
+ /* If it wasn't set from AMBA, ignore it */
+ if (txd->direction == DMA_TO_DEVICE)
+ /* Select signal as destination */
+ phychan->ccfg |=
+ (phychan->signal << PL080_CONFIG_DST_SEL_SHIFT);
+ else if (txd->direction == DMA_FROM_DEVICE)
+ /* Select signal as source */
+ phychan->ccfg |=
+ (phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT);
+ /* Always enable error interrupts */
+ phychan->ccfg |= PL080_CONFIG_ERR_IRQ_MASK;
+ /* Always enable terminal interrupts */
+ phychan->ccfg |= PL080_CONFIG_TC_IRQ_MASK;
+}
+
+/*
+ * Enable the DMA channel
+ * Assumes all other configuration bits have been set
+ * as desired before this code is called
+ */
+static void pl08x_enable_phy_chan(struct pl08x_driver_data *pl08x,
+ struct pl08x_phy_chan *ch)
+{
+ u32 val;
+
+ /*
+ * Do not access config register until channel shows as disabled
+ */
+ while (readl(pl08x->base + PL080_EN_CHAN) & (1 << ch->id))
+ ;
+
+ /*
+ * Do not access config register until channel shows as inactive
+ */
+ val = readl(ch->base + PL080_CH_CONFIG);
+ while ((val & PL080_CONFIG_ACTIVE) || (val & PL080_CONFIG_ENABLE))
+ val = readl(ch->base + PL080_CH_CONFIG);
+
+ writel(val | PL080_CONFIG_ENABLE, ch->base + PL080_CH_CONFIG);
+}
+
+/*
+ * Overall DMAC remains enabled always.
+ *
+ * Disabling individual channels could lose data.
+ *
+ * Disable the peripheral DMA after disabling the DMAC
+ * in order to allow the DMAC FIFO to drain, and
+ * hence allow the channel to show inactive
+ *
+ */
+static void pl08x_pause_phy_chan(struct pl08x_phy_chan *ch)
+{
+ u32 val;
+
+ /* Set the HALT bit and wait for the FIFO to drain */
+ val = readl(ch->base + PL080_CH_CONFIG);
+ val |= PL080_CONFIG_HALT;
+ writel(val, ch->base + PL080_CH_CONFIG);
+
+ /* Wait for channel inactive */
+ while (pl08x_phy_channel_busy(ch))
+ ;
+}
+
+static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch)
+{
+ u32 val;
+
+ /* Clear the HALT bit */
+ val = readl(ch->base + PL080_CH_CONFIG);
+ val &= ~PL080_CONFIG_HALT;
+ writel(val, ch->base + PL080_CH_CONFIG);
+}
+
+
+/* Stops the channel */
+static void pl08x_stop_phy_chan(struct pl08x_phy_chan *ch)
+{
+ u32 val;
+
+ pl08x_pause_phy_chan(ch);
+
+ /* Disable channel */
+ val = readl(ch->base + PL080_CH_CONFIG);
+ val &= ~PL080_CONFIG_ENABLE;
+ val &= ~PL080_CONFIG_ERR_IRQ_MASK;
+ val &= ~PL080_CONFIG_TC_IRQ_MASK;
+ writel(val, ch->base + PL080_CH_CONFIG);
+}
+
+static inline u32 get_bytes_in_cctl(u32 cctl)
+{
+ /* The source width defines the number of bytes */
+ u32 bytes = cctl & PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+ switch (cctl >> PL080_CONTROL_SWIDTH_SHIFT) {
+ case PL080_WIDTH_8BIT:
+ break;
+ case PL080_WIDTH_16BIT:
+ bytes *= 2;
+ break;
+ case PL080_WIDTH_32BIT:
+ bytes *= 4;
+ break;
+ }
+ return bytes;
+}
+
+/* The channel should be paused when calling this */
+static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_phy_chan *ch;
+ struct pl08x_txd *txdi = NULL;
+ struct pl08x_txd *txd;
+ unsigned long flags;
+ u32 bytes = 0;
+
+ spin_lock_irqsave(&plchan->lock, flags);
+
+ ch = plchan->phychan;
+ txd = plchan->at;
+
+ /*
+ * Next follow the LLIs to get the number of pending bytes in the
+ * currently active transaction.
+ */
+ if (ch && txd) {
+ struct lli *llis_va = txd->llis_va;
+ struct lli *llis_bus = (struct lli *) txd->llis_bus;
+ u32 clli = readl(ch->base + PL080_CH_LLI);
+
+ /* First get the bytes in the current active LLI */
+ bytes = get_bytes_in_cctl(readl(ch->base + PL080_CH_CONTROL));
+
+ if (clli) {
+ int i = 0;
+
+ /* Forward to the LLI pointed to by clli */
+ while ((clli != (u32) &(llis_bus[i])) &&
+ (i < MAX_NUM_TSFR_LLIS))
+ i++;
+
+ while (clli) {
+ bytes += get_bytes_in_cctl(llis_va[i].cctl);
+ /*
+ * A clli of 0x00000000 will terminate the
+ * LLI list
+ */
+ clli = llis_va[i].next;
+ i++;
+ }
+ }
+ }
+
+ /* Sum up all queued transactions */
+ if (!list_empty(&plchan->desc_list)) {
+ list_for_each_entry(txdi, &plchan->desc_list, node) {
+ bytes += txdi->len;
+ }
+
+ }
+
+ spin_unlock_irqrestore(&plchan->lock, flags);
+
+ return bytes;
+}
+
+/*
+ * Allocate a physical channel for a virtual channel
+ */
+static struct pl08x_phy_chan *
+pl08x_get_phy_channel(struct pl08x_driver_data *pl08x,
+ struct pl08x_dma_chan *virt_chan)
+{
+ struct pl08x_phy_chan *ch = NULL;
+ unsigned long flags;
+ int i;
+
+ /*
+ * Try to locate a physical channel to be used for
+ * this transfer. If all are taken return NULL and
+ * the requester will have to cope by using some fallback
+ * PIO mode or retrying later.
+ */
+ for (i = 0; i < pl08x->vd->channels; i++) {
+ ch = &pl08x->phy_chans[i];
+
+ spin_lock_irqsave(&ch->lock, flags);
+
+ if (!ch->serving) {
+ ch->serving = virt_chan;
+ ch->signal = -1;
+ spin_unlock_irqrestore(&ch->lock, flags);
+ break;
+ }
+
+ spin_unlock_irqrestore(&ch->lock, flags);
+ }
+
+ if (i == pl08x->vd->channels) {
+ /* No physical channel available, cope with it */
+ return NULL;
+ }
+
+ return ch;
+}
+
+static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x,
+ struct pl08x_phy_chan *ch)
+{
+ unsigned long flags;
+
+ /* Stop the channel and clear its interrupts */
+ pl08x_stop_phy_chan(ch);
+ writel((1 << ch->id), pl08x->base + PL080_ERR_CLEAR);
+ writel((1 << ch->id), pl08x->base + PL080_TC_CLEAR);
+
+ /* Mark it as free */
+ spin_lock_irqsave(&ch->lock, flags);
+ ch->serving = NULL;
+ spin_unlock_irqrestore(&ch->lock, flags);
+}
+
+/*
+ * LLI handling
+ */
+
+static inline unsigned int pl08x_get_bytes_for_cctl(unsigned int coded)
+{
+ switch (coded) {
+ case PL080_WIDTH_8BIT:
+ return 1;
+ case PL080_WIDTH_16BIT:
+ return 2;
+ case PL080_WIDTH_32BIT:
+ return 4;
+ default:
+ break;
+ }
+ BUG();
+ return 0;
+}
+
+static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
+ u32 tsize)
+{
+ u32 retbits = cctl;
+
+ /* Remove all src, dst and transfersize bits */
+ retbits &= ~PL080_CONTROL_DWIDTH_MASK;
+ retbits &= ~PL080_CONTROL_SWIDTH_MASK;
+ retbits &= ~PL080_CONTROL_TRANSFER_SIZE_MASK;
+
+ /* Then set the bits according to the parameters */
+ switch (srcwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ switch (dstwidth) {
+ case 1:
+ retbits |= PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case 2:
+ retbits |= PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ case 4:
+ retbits |= PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ retbits |= tsize << PL080_CONTROL_TRANSFER_SIZE_SHIFT;
+ return retbits;
+}
+
+/*
+ * Autoselect a master bus to use for the transfer
+ * this prefers the destination bus if both available
+ * if fixed address on one bus the other will be chosen
+ */
+void pl08x_choose_master_bus(struct pl08x_bus_data *src_bus,
+ struct pl08x_bus_data *dst_bus, struct pl08x_bus_data **mbus,
+ struct pl08x_bus_data **sbus, u32 cctl)
+{
+ if (!(cctl & PL080_CONTROL_DST_INCR)) {
+ *mbus = src_bus;
+ *sbus = dst_bus;
+ } else if (!(cctl & PL080_CONTROL_SRC_INCR)) {
+ *mbus = dst_bus;
+ *sbus = src_bus;
+ } else {
+ if (dst_bus->buswidth == 4) {
+ *mbus = dst_bus;
+ *sbus = src_bus;
+ } else if (src_bus->buswidth == 4) {
+ *mbus = src_bus;
+ *sbus = dst_bus;
+ } else if (dst_bus->buswidth == 2) {
+ *mbus = dst_bus;
+ *sbus = src_bus;
+ } else if (src_bus->buswidth == 2) {
+ *mbus = src_bus;
+ *sbus = dst_bus;
+ } else {
+ /* src_bus->buswidth == 1 */
+ *mbus = dst_bus;
+ *sbus = src_bus;
+ }
+ }
+}
+
+/*
+ * Fills in one LLI for a certain transfer descriptor
+ * and advance the counter
+ */
+int pl08x_fill_lli_for_desc(struct pl08x_driver_data *pl08x,
+ struct pl08x_txd *txd, int num_llis, int len,
+ u32 cctl, u32 *remainder)
+{
+ struct lli *llis_va = txd->llis_va;
+ struct lli *llis_bus = (struct lli *) txd->llis_bus;
+
+ BUG_ON(num_llis >= MAX_NUM_TSFR_LLIS);
+
+ llis_va[num_llis].cctl = cctl;
+ llis_va[num_llis].src = txd->srcbus.addr;
+ llis_va[num_llis].dst = txd->dstbus.addr;
+
+ /*
+ * On versions with dual masters, you can optionally AND on
+ * PL080_LLI_LM_AHB2 to the LLI to tell the hardware to read
+ * in new LLIs with that controller, but we always try to
+ * choose AHB1 to point into memory. The idea is to have AHB2
+ * fixed on the peripheral and AHB1 messing around in the
+ * memory. So we don't manipulate this bit currently.
+ */
+
+ llis_va[num_llis].next =
+ (dma_addr_t)((u32) &(llis_bus[num_llis + 1]));
+
+ if (cctl & PL080_CONTROL_SRC_INCR)
+ txd->srcbus.addr += len;
+ if (cctl & PL080_CONTROL_DST_INCR)
+ txd->dstbus.addr += len;
+
+ *remainder -= len;
+
+ return num_llis + 1;
+}
+
+/*
+ * Return number of bytes to fill to boundary, or len
+ */
+static inline u32 pl08x_pre_boundary(u32 addr, u32 len)
+{
+ u32 boundary;
+
+ boundary = ((addr >> PL08X_BOUNDARY_SHIFT) + 1)
+ << PL08X_BOUNDARY_SHIFT;
+
+ if (boundary < addr + len)
+ return boundary - addr;
+ else
+ return len;
+}
+
+/*
+ * This fills in the table of LLIs for the transfer descriptor
+ * Note that we assume we never have to change the burst sizes
+ * Return 0 for error
+ */
+static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
+ struct pl08x_txd *txd)
+{
+ struct pl08x_channel_data *cd = txd->cd;
+ struct pl08x_bus_data *mbus, *sbus;
+ u32 remainder;
+ int num_llis = 0;
+ u32 cctl;
+ int max_bytes_per_lli;
+ int total_bytes = 0;
+ struct lli *llis_va;
+ struct lli *llis_bus;
+
+ if (!txd) {
+ dev_err(&pl08x->adev->dev, "%s no descriptor\n", __func__);
+ return 0;
+ }
+
+ txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT,
+ &txd->llis_bus);
+ if (!txd->llis_va) {
+ dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__);
+ return 0;
+ }
+
+ pl08x->pool_ctr++;
+
+ /*
+ * Initialize bus values for this transfer
+ * from the passed optimal values
+ */
+ if (!cd) {
+ dev_err(&pl08x->adev->dev, "%s no channel data\n", __func__);
+ return 0;
+ }
+
+ /* Get the default CCTL from the platform data */
+ cctl = cd->cctl;
+
+ /*
+ * On the PL080 we have two bus masters and we
+ * should select one for source and one for
+ * destination. We try to use AHB2 for the
+ * bus which does not increment (typically the
+ * peripheral) else we just choose something.
+ */
+ cctl &= ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2);
+ if (pl08x->vd->dualmaster) {
+ if (cctl & PL080_CONTROL_SRC_INCR)
+ /* Source increments, use AHB2 for destination */
+ cctl |= PL080_CONTROL_DST_AHB2;
+ else if (cctl & PL080_CONTROL_DST_INCR)
+ /* Destination increments, use AHB2 for source */
+ cctl |= PL080_CONTROL_SRC_AHB2;
+ else
+ /* Just pick something, source AHB1 dest AHB2 */
+ cctl |= PL080_CONTROL_DST_AHB2;
+ }
+
+ /* Find maximum width of the source bus */
+ txd->srcbus.maxwidth =
+ pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_SWIDTH_MASK) >>
+ PL080_CONTROL_SWIDTH_SHIFT);
+
+ /* Find maximum width of the destination bus */
+ txd->dstbus.maxwidth =
+ pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >>
+ PL080_CONTROL_DWIDTH_SHIFT);
+
+ /* Set up the bus widths to the maximum */
+ txd->srcbus.buswidth = txd->srcbus.maxwidth;
+ txd->dstbus.buswidth = txd->dstbus.maxwidth;
+ dev_vdbg(&pl08x->adev->dev,
+ "%s source bus is %d bytes wide, dest bus is %d bytes wide\n",
+ __func__, txd->srcbus.buswidth, txd->dstbus.buswidth);
+
+
+ /*
+ * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
+ */
+ max_bytes_per_lli = min(txd->srcbus.buswidth, txd->dstbus.buswidth) *
+ PL080_CONTROL_TRANSFER_SIZE_MASK;
+ dev_vdbg(&pl08x->adev->dev,
+ "%s max bytes per lli = %d\n",
+ __func__, max_bytes_per_lli);
+
+ /* We need to count this down to zero */
+ remainder = txd->len;
+ dev_vdbg(&pl08x->adev->dev,
+ "%s remainder = %d\n",
+ __func__, remainder);
+
+ /*
+ * Choose bus to align to
+ * - prefers destination bus if both available
+ * - if fixed address on one bus chooses other
+ * - modifies cctl to choose an apropriate master
+ */
+ pl08x_choose_master_bus(&txd->srcbus, &txd->dstbus,
+ &mbus, &sbus, cctl);
+
+
+ /*
+ * The lowest bit of the LLI register
+ * is also used to indicate which master to
+ * use for reading the LLIs.
+ */
+
+ if (txd->len < mbus->buswidth) {
+ /*
+ * Less than a bus width available
+ * - send as single bytes
+ */
+ while (remainder) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%s single byte LLIs for a transfer of "
+ "less than a bus width (remain %08x)\n",
+ __func__, remainder);
+ cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+ num_llis =
+ pl08x_fill_lli_for_desc(pl08x, txd, num_llis, 1,
+ cctl, &remainder);
+ total_bytes++;
+ }
+ } else {
+ /*
+ * Make one byte LLIs until master bus is aligned
+ * - slave will then be aligned also
+ */
+ while ((mbus->addr) % (mbus->buswidth)) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%s adjustment lli for less than bus width "
+ "(remain %08x)\n",
+ __func__, remainder);
+ cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+ num_llis = pl08x_fill_lli_for_desc
+ (pl08x, txd, num_llis, 1, cctl, &remainder);
+ total_bytes++;
+ }
+
+ /*
+ * Master now aligned
+ * - if slave is not then we must set its width down
+ */
+ if (sbus->addr % sbus->buswidth) {
+ dev_dbg(&pl08x->adev->dev,
+ "%s set down bus width to one byte\n",
+ __func__);
+
+ sbus->buswidth = 1;
+ }
+
+ /*
+ * Make largest possible LLIs until less than one bus
+ * width left
+ */
+ while (remainder > (mbus->buswidth - 1)) {
+ int lli_len, target_len;
+ int tsize;
+ int odd_bytes;
+
+ /*
+ * If enough left try to send max possible,
+ * otherwise try to send the remainder
+ */
+ target_len = remainder;
+ if (remainder > max_bytes_per_lli)
+ target_len = max_bytes_per_lli;
+
+ /*
+ * Set bus lengths for incrementing busses
+ * to number of bytes which fill to next memory
+ * boundary
+ */
+ if (cctl & PL080_CONTROL_SRC_INCR)
+ txd->srcbus.fill_bytes =
+ pl08x_pre_boundary(
+ txd->srcbus.addr,
+ remainder);
+ else
+ txd->srcbus.fill_bytes =
+ max_bytes_per_lli;
+
+ if (cctl & PL080_CONTROL_DST_INCR)
+ txd->dstbus.fill_bytes =
+ pl08x_pre_boundary(
+ txd->dstbus.addr,
+ remainder);
+ else
+ txd->dstbus.fill_bytes =
+ max_bytes_per_lli;
+
+ /*
+ * Find the nearest
+ */
+ lli_len = min(txd->srcbus.fill_bytes,
+ txd->dstbus.fill_bytes);
+
+ BUG_ON(lli_len > remainder);
+
+ if (lli_len <= 0) {
+ dev_err(&pl08x->adev->dev,
+ "%s lli_len is %d, <= 0\n",
+ __func__, lli_len);
+ return 0;
+ }
+
+ if (lli_len == target_len) {
+ /*
+ * Can send what we wanted
+ */
+ /*
+ * Maintain alignment
+ */
+ lli_len = (lli_len/mbus->buswidth) *
+ mbus->buswidth;
+ odd_bytes = 0;
+ } else {
+ /*
+ * So now we know how many bytes to transfer
+ * to get to the nearest boundary
+ * The next lli will past the boundary
+ * - however we may be working to a boundary
+ * on the slave bus
+ * We need to ensure the master stays aligned
+ */
+ odd_bytes = lli_len % mbus->buswidth;
+ /*
+ * - and that we are working in multiples
+ * of the bus widths
+ */
+ lli_len -= odd_bytes;
+
+ }
+
+ if (lli_len) {
+ /*
+ * Check against minimum bus alignment:
+ * Calculate actual transfer size in relation
+ * to bus width an get a maximum remainder of
+ * the smallest bus width - 1
+ */
+ /* FIXME: use round_down()? */
+ tsize = lli_len / min(mbus->buswidth,
+ sbus->buswidth);
+ lli_len = tsize * min(mbus->buswidth,
+ sbus->buswidth);
+
+ if (target_len != lli_len) {
+ dev_vdbg(&pl08x->adev->dev,
+ "%s can't send what we want. Desired %08x, lli of %08x bytes in txd of %08x\n",
+ __func__, target_len, lli_len, txd->len);
+ }
+
+ cctl = pl08x_cctl_bits(cctl,
+ txd->srcbus.buswidth,
+ txd->dstbus.buswidth,
+ tsize);
+
+ dev_vdbg(&pl08x->adev->dev,
+ "%s fill lli with single lli chunk of size %08x (remainder %08x)\n",
+ __func__, lli_len, remainder);
+ num_llis = pl08x_fill_lli_for_desc(pl08x, txd,
+ num_llis, lli_len, cctl,
+ &remainder);
+ total_bytes += lli_len;
+ }
+
+
+ if (odd_bytes) {
+ /*
+ * Creep past the boundary,
+ * maintaining master alignment
+ */
+ int j;
+ for (j = 0; (j < mbus->buswidth)
+ && (remainder); j++) {
+ cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+ dev_vdbg(&pl08x->adev->dev,
+ "%s align with boundardy, single byte (remain %08x)\n",
+ __func__, remainder);
+ num_llis =
+ pl08x_fill_lli_for_desc(pl08x,
+ txd, num_llis, 1,
+ cctl, &remainder);
+ total_bytes++;
+ }
+ }
+ }
+
+ /*
+ * Send any odd bytes
+ */
+ if (remainder < 0) {
+ dev_err(&pl08x->adev->dev, "%s remainder not fitted 0x%08x bytes\n",
+ __func__, remainder);
+ return 0;
+ }
+
+ while (remainder) {
+ cctl = pl08x_cctl_bits(cctl, 1, 1, 1);
+ dev_vdbg(&pl08x->adev->dev,
+ "%s align with boundardy, single odd byte (remain %d)\n",
+ __func__, remainder);
+ num_llis = pl08x_fill_lli_for_desc(pl08x, txd, num_llis,
+ 1, cctl, &remainder);
+ total_bytes++;
+ }
+ }
+ if (total_bytes != txd->len) {
+ dev_err(&pl08x->adev->dev,
+ "%s size of encoded lli:s don't match total txd, transferred 0x%08x from size 0x%08x\n",
+ __func__, total_bytes, txd->len);
+ return 0;
+ }
+
+ if (num_llis >= MAX_NUM_TSFR_LLIS) {
+ dev_err(&pl08x->adev->dev,
+ "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n",
+ __func__, (u32) MAX_NUM_TSFR_LLIS);
+ return 0;
+ }
+ /*
+ * Decide whether this is a loop or a terminated transfer
+ */
+ llis_va = txd->llis_va;
+ llis_bus = (struct lli *) txd->llis_bus;
+
+ if (cd->circular_buffer) {
+ /*
+ * Loop the circular buffer so that the next element
+ * points back to the beginning of the LLI.
+ */
+ llis_va[num_llis - 1].next =
+ (dma_addr_t)((unsigned int)&(llis_bus[0]));
+ } else {
+ /*
+ * On non-circular buffers, the final LLI terminates
+ * the LLI.
+ */
+ llis_va[num_llis - 1].next = 0;
+ /*
+ * The final LLI element shall also fire an interrupt
+ */
+ llis_va[num_llis - 1].cctl |= PL080_CONTROL_TC_IRQ_EN;
+ }
+
+ /* Now store the channel register values */
+ txd->csrc = llis_va[0].src;
+ txd->cdst = llis_va[0].dst;
+ if (num_llis > 1)
+ txd->clli = llis_va[0].next;
+ else
+ txd->clli = 0;
+
+ txd->cctl = llis_va[0].cctl;
+ /* ccfg will be set at physical channel allocation time */
+
+#ifdef VERBOSE_DEBUG
+ {
+ int i;
+
+ for (i = 0; i < num_llis; i++) {
+ dev_vdbg(&pl08x->adev->dev,
+ "lli %d @%p: csrc=%08x, cdst=%08x, cctl=%08x, clli=%08x\n",
+ i,
+ &llis_va[i],
+ llis_va[i].src,
+ llis_va[i].dst,
+ llis_va[i].cctl,
+ llis_va[i].next
+ );
+ }
+ }
+#endif
+
+ return num_llis;
+}
+
+/* You should call this with the struct pl08x lock held */
+static void pl08x_free_txd(struct pl08x_driver_data *pl08x,
+ struct pl08x_txd *txd)
+{
+ if (!txd)
+ dev_err(&pl08x->adev->dev,
+ "%s no descriptor to free\n",
+ __func__);
+
+ /* Free the LLI */
+ dma_pool_free(pl08x->pool, txd->llis_va,
+ txd->llis_bus);
+
+ pl08x->pool_ctr--;
+
+ kfree(txd);
+}
+
+static void pl08x_free_txd_list(struct pl08x_driver_data *pl08x,
+ struct pl08x_dma_chan *plchan)
+{
+ struct pl08x_txd *txdi = NULL;
+ struct pl08x_txd *next;
+
+ if (!list_empty(&plchan->desc_list)) {
+ list_for_each_entry_safe(txdi,
+ next, &plchan->desc_list, node) {
+ list_del(&txdi->node);
+ pl08x_free_txd(pl08x, txdi);
+ }
+
+ }
+}
+
+/*
+ * The DMA ENGINE API
+ */
+static int pl08x_alloc_chan_resources(struct dma_chan *chan)
+{
+ return 0;
+}
+
+static void pl08x_free_chan_resources(struct dma_chan *chan)
+{
+}
+
+/*
+ * This should be called with the channel plchan->lock held
+ */
+static int prep_phy_channel(struct pl08x_dma_chan *plchan,
+ struct pl08x_txd *txd)
+{
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_phy_chan *ch;
+ int ret;
+
+ /* Check if we already have a channel */
+ if (plchan->phychan)
+ return 0;
+
+ ch = pl08x_get_phy_channel(pl08x, plchan);
+ if (!ch) {
+ /* No physical channel available, cope with it */
+ dev_dbg(&pl08x->adev->dev, "no physical channel available for xfer on %s\n", plchan->name);
+ return -EBUSY;
+ }
+
+ /*
+ * OK we have a physical channel: for memcpy() this is all we
+ * need, but for slaves the physical signals may be muxed!
+ * Can the platform allow us to use this channel?
+ */
+ if (plchan->slave &&
+ ch->signal < 0 &&
+ pl08x->pd->get_signal) {
+ ret = pl08x->pd->get_signal(plchan);
+ if (ret < 0) {
+ dev_dbg(&pl08x->adev->dev,
+ "unable to use physical channel %d for transfer on %s due to platform restrictions\n",
+ ch->id, plchan->name);
+ /* Release physical channel & return */
+ pl08x_put_phy_channel(pl08x, ch);
+ return -EBUSY;
+ }
+ ch->signal = ret;
+ }
+
+ dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",
+ ch->id,
+ ch->signal,
+ plchan->name);
+
+ plchan->phychan = ch;
+
+ return 0;
+}
+
+static dma_cookie_t pl08x_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(tx->chan);
+
+ atomic_inc(&plchan->last_issued);
+ tx->cookie = atomic_read(&plchan->last_issued);
+ /* This unlock follows the lock in the prep() function */
+ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags);
+
+ return tx->cookie;
+}
+
+static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt(
+ struct dma_chan *chan, unsigned long flags)
+{
+ struct dma_async_tx_descriptor *retval = NULL;
+
+ return retval;
+}
+
+/*
+ * Code accessing dma_async_is_complete() in a tight loop
+ * may give problems - could schedule where indicated.
+ * If slaves are relying on interrupts to signal completion this
+ * function must not be called with interrupts disabled
+ */
+static enum dma_status
+pl08x_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+ enum dma_status ret;
+ u32 bytesleft = 0;
+
+ last_used = atomic_read(&plchan->last_issued);
+ last_complete = plchan->lc;
+
+ ret = dma_async_is_complete(cookie, last_complete, last_used);
+ if (ret == DMA_SUCCESS) {
+ dma_set_tx_state(txstate, last_complete, last_used, 0);
+ return ret;
+ }
+
+ /*
+ * schedule(); could be inserted here
+ */
+
+ /*
+ * This cookie not complete yet
+ */
+ last_used = atomic_read(&plchan->last_issued);
+ last_complete = plchan->lc;
+
+ /* Get number of bytes left in the active transactions and queue */
+ bytesleft = pl08x_getbytes_chan(plchan);
+
+ dma_set_tx_state(txstate, last_complete, last_used,
+ bytesleft);
+
+ if (plchan->state == PL08X_CHAN_PAUSED)
+ return DMA_PAUSED;
+
+ /* Whether waiting or running, we're in progress */
+ return DMA_IN_PROGRESS;
+}
+
+/* PrimeCell DMA extension */
+struct burst_table {
+ int burstwords;
+ u32 reg;
+};
+
+static const struct burst_table burst_sizes[] = {
+ {
+ .burstwords = 256,
+ .reg = (PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 128,
+ .reg = (PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 64,
+ .reg = (PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 32,
+ .reg = (PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 16,
+ .reg = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 8,
+ .reg = (PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 4,
+ .reg = (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+ {
+ .burstwords = 1,
+ .reg = (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT),
+ },
+};
+
+static void dma_set_runtime_config(struct dma_chan *chan,
+ struct dma_slave_config *config)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_channel_data *cd = plchan->cd;
+ enum dma_slave_buswidth addr_width;
+ u32 maxburst;
+ u32 cctl = 0;
+ /* Mask out all except src and dst channel */
+ u32 ccfg = cd->ccfg & 0x000003DEU;
+ int i = 0;
+
+ /* Transfer direction */
+ plchan->runtime_direction = config->direction;
+ if (config->direction == DMA_TO_DEVICE) {
+ plchan->runtime_addr = config->dst_addr;
+ cctl |= PL080_CONTROL_SRC_INCR;
+ ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ addr_width = config->dst_addr_width;
+ maxburst = config->dst_maxburst;
+ } else if (config->direction == DMA_FROM_DEVICE) {
+ plchan->runtime_addr = config->src_addr;
+ cctl |= PL080_CONTROL_DST_INCR;
+ ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ addr_width = config->src_addr_width;
+ maxburst = config->src_maxburst;
+ } else {
+ dev_err(&pl08x->adev->dev,
+ "bad runtime_config: alien transfer direction\n");
+ return;
+ }
+
+ switch (addr_width) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ cctl |= (PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT) |
+ (PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT);
+ break;
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ cctl |= (PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT) |
+ (PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT);
+ break;
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ cctl |= (PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT) |
+ (PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT);
+ break;
+ default:
+ dev_err(&pl08x->adev->dev,
+ "bad runtime_config: alien address width\n");
+ return;
+ }
+
+ /*
+ * Now decide on a maxburst:
+ * If this channel will only request single transfers, set
+ * this down to ONE element.
+ */
+ if (plchan->cd->single) {
+ cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
+ (PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT);
+ } else {
+ while (i < ARRAY_SIZE(burst_sizes)) {
+ if (burst_sizes[i].burstwords <= maxburst)
+ break;
+ i++;
+ }
+ cctl |= burst_sizes[i].reg;
+ }
+
+ /* Access the cell in privileged mode, non-bufferable, non-cacheable */
+ cctl &= ~PL080_CONTROL_PROT_MASK;
+ cctl |= PL080_CONTROL_PROT_SYS;
+
+ /* Modify the default channel data to fit PrimeCell request */
+ cd->cctl = cctl;
+ cd->ccfg = ccfg;
+
+ dev_dbg(&pl08x->adev->dev,
+ "configured channel %s (%s) for %s, data width %d, "
+ "maxburst %d words, LE, CCTL=%08x, CCFG=%08x\n",
+ dma_chan_name(chan), plchan->name,
+ (config->direction == DMA_FROM_DEVICE) ? "RX" : "TX",
+ addr_width,
+ maxburst,
+ cctl, ccfg);
+}
+
+/*
+ * Slave transactions callback to the slave device to allow
+ * synchronization of slave DMA signals with the DMAC enable
+ */
+static void pl08x_issue_pending(struct dma_chan *chan)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ unsigned long flags;
+
+ spin_lock_irqsave(&plchan->lock, flags);
+ /* Something is already active */
+ if (plchan->at) {
+ spin_unlock_irqrestore(&plchan->lock, flags);
+ return;
+ }
+
+ /* Didn't get a physical channel so waiting for it ... */
+ if (plchan->state == PL08X_CHAN_WAITING)
+ return;
+
+ /* Take the first element in the queue and execute it */
+ if (!list_empty(&plchan->desc_list)) {
+ struct pl08x_txd *next;
+
+ next = list_first_entry(&plchan->desc_list,
+ struct pl08x_txd,
+ node);
+ list_del(&next->node);
+ plchan->at = next;
+ plchan->state = PL08X_CHAN_RUNNING;
+
+ /* Configure the physical channel for the active txd */
+ pl08x_config_phychan_for_txd(plchan);
+ pl08x_set_cregs(pl08x, plchan->phychan);
+ pl08x_enable_phy_chan(pl08x, plchan->phychan);
+ }
+
+ spin_unlock_irqrestore(&plchan->lock, flags);
+}
+
+static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
+ struct pl08x_txd *txd)
+{
+ int num_llis;
+ struct pl08x_driver_data *pl08x = plchan->host;
+ int ret;
+
+ num_llis = pl08x_fill_llis_for_desc(pl08x, txd);
+
+ if (!num_llis)
+ return -EINVAL;
+
+ spin_lock_irqsave(&plchan->lock, plchan->lockflags);
+
+ /*
+ * If this device is not using a circular buffer then
+ * queue this new descriptor for transfer.
+ * The descriptor for a circular buffer continues
+ * to be used until the channel is freed.
+ */
+ if (txd->cd->circular_buffer)
+ dev_err(&pl08x->adev->dev,
+ "%s attempting to queue a circular buffer\n",
+ __func__);
+ else
+ list_add_tail(&txd->node,
+ &plchan->desc_list);
+
+ /*
+ * See if we already have a physical channel allocated,
+ * else this is the time to try to get one.
+ */
+ ret = prep_phy_channel(plchan, txd);
+ if (ret) {
+ /*
+ * No physical channel available, we will
+ * stack up the memcpy channels until there is a channel
+ * available to handle it whereas slave transfers may
+ * have been denied due to platform channel muxing restrictions
+ * and since there is no guarantee that this will ever be
+ * resolved, and since the signal must be aquired AFTER
+ * aquiring the physical channel, we will let them be NACK:ed
+ * with -EBUSY here. The drivers can alway retry the prep()
+ * call if they are eager on doing this using DMA.
+ */
+ if (plchan->slave) {
+ pl08x_free_txd_list(pl08x, plchan);
+ spin_unlock_irqrestore(&plchan->lock, plchan->lockflags);
+ return -EBUSY;
+ }
+ /* Do this memcpy whenever there is a channel ready */
+ plchan->state = PL08X_CHAN_WAITING;
+ plchan->waiting = txd;
+ } else
+ /*
+ * Else we're all set, paused and ready to roll,
+ * status will switch to PL08X_CHAN_RUNNING when
+ * we call issue_pending(). If there is something
+ * running on the channel already we don't change
+ * its state.
+ */
+ if (plchan->state == PL08X_CHAN_IDLE)
+ plchan->state = PL08X_CHAN_PAUSED;
+
+ /*
+ * Notice that we leave plchan->lock locked on purpose:
+ * it will be unlocked in the subsequent tx_submit()
+ * call. This is a consequence of the current API.
+ */
+
+ return 0;
+}
+
+/*
+ * Initialize a descriptor to be used by memcpy submit
+ */
+static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
+ struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ int ret;
+
+ txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ if (!txd) {
+ dev_err(&pl08x->adev->dev,
+ "%s no memory for descriptor\n", __func__);
+ return NULL;
+ }
+
+ dma_async_tx_descriptor_init(&txd->tx, chan);
+ txd->direction = DMA_NONE;
+ txd->srcbus.addr = src;
+ txd->dstbus.addr = dest;
+
+ /* Set platform data for m2m */
+ txd->cd = &pl08x->pd->memcpy_channel;
+ /* Both to be incremented or the code will break */
+ txd->cd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
+ txd->tx.tx_submit = pl08x_tx_submit;
+ txd->tx.callback = NULL;
+ txd->tx.callback_param = NULL;
+ txd->len = len;
+
+ INIT_LIST_HEAD(&txd->node);
+ ret = pl08x_prep_channel_resources(plchan, txd);
+ if (ret)
+ return NULL;
+ /*
+ * NB: the channel lock is held at this point so tx_submit()
+ * must be called in direct succession.
+ */
+
+ return &txd->tx;
+}
+
+struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ struct pl08x_txd *txd;
+ int ret;
+
+ /*
+ * Current implementation ASSUMES only one sg
+ */
+ if (sg_len != 1) {
+ dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n",
+ __func__);
+ BUG();
+ }
+
+ dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n",
+ __func__, sgl->length, plchan->name);
+
+ txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT);
+ if (!txd) {
+ dev_err(&pl08x->adev->dev, "%s no txd\n", __func__);
+ return NULL;
+ }
+
+ dma_async_tx_descriptor_init(&txd->tx, chan);
+
+ if (direction != plchan->runtime_direction)
+ dev_err(&pl08x->adev->dev, "%s DMA setup does not match "
+ "the direction configured for the PrimeCell\n",
+ __func__);
+
+ /*
+ * Set up addresses, the PrimeCell configured address
+ * will take precedence since this may configure the
+ * channel target address dynamically at runtime.
+ */
+ txd->direction = direction;
+ if (direction == DMA_TO_DEVICE) {
+ txd->srcbus.addr = sgl->dma_address;
+ if (plchan->runtime_addr)
+ txd->dstbus.addr = plchan->runtime_addr;
+ else
+ txd->dstbus.addr = plchan->cd->addr;
+ } else if (direction == DMA_FROM_DEVICE) {
+ if (plchan->runtime_addr)
+ txd->srcbus.addr = plchan->runtime_addr;
+ else
+ txd->srcbus.addr = plchan->cd->addr;
+ txd->dstbus.addr = sgl->dma_address;
+ } else {
+ dev_err(&pl08x->adev->dev,
+ "%s direction unsupported\n", __func__);
+ return NULL;
+ }
+ txd->cd = plchan->cd;
+ txd->tx.tx_submit = pl08x_tx_submit;
+ txd->tx.callback = NULL;
+ txd->tx.callback_param = NULL;
+ txd->len = sgl->length;
+ INIT_LIST_HEAD(&txd->node);
+
+ ret = pl08x_prep_channel_resources(plchan, txd);
+ if (ret)
+ return NULL;
+ /*
+ * NB: the channel lock is held at this point so tx_submit()
+ * must be called in direct succession.
+ */
+
+ return &txd->tx;
+}
+
+static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ struct pl08x_driver_data *pl08x = plchan->host;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Controls applicable to inactive channels */
+ if (cmd == DMA_SLAVE_CONFIG) {
+ dma_set_runtime_config(chan,
+ (struct dma_slave_config *)
+ arg);
+ return 0;
+ }
+
+ /*
+ * Anything succeeds on channels with no physical allocation and
+ * no queued transfers.
+ */
+ spin_lock_irqsave(&plchan->lock, flags);
+ if (!plchan->phychan && !plchan->at) {
+ spin_unlock_irqrestore(&plchan->lock, flags);
+ return 0;
+ }
+
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ plchan->state = PL08X_CHAN_IDLE;
+
+ if (plchan->phychan) {
+ pl08x_stop_phy_chan(plchan->phychan);
+
+ /*
+ * Mark physical channel as free and free any slave
+ * signal
+ */
+ if ((plchan->phychan->signal >= 0) &&
+ pl08x->pd->put_signal) {
+ pl08x->pd->put_signal(plchan);
+ plchan->phychan->signal = -1;
+ }
+ pl08x_put_phy_channel(pl08x, plchan->phychan);
+ plchan->phychan = NULL;
+ }
+ /* Stop any pending tasklet */
+ tasklet_disable(&plchan->tasklet);
+ /* Dequeue jobs and free LLIs */
+ if (plchan->at) {
+ pl08x_free_txd(pl08x, plchan->at);
+ plchan->at = NULL;
+ }
+ /* Dequeue jobs not yet fired as well */
+ pl08x_free_txd_list(pl08x, plchan);
+ break;
+ case DMA_PAUSE:
+ pl08x_pause_phy_chan(plchan->phychan);
+ plchan->state = PL08X_CHAN_PAUSED;
+ break;
+ case DMA_RESUME:
+ pl08x_resume_phy_chan(plchan->phychan);
+ plchan->state = PL08X_CHAN_RUNNING;
+ break;
+ default:
+ /* Unknown command */
+ ret = -ENXIO;
+ break;
+ }
+
+ spin_unlock_irqrestore(&plchan->lock, flags);
+
+ return ret;
+}
+
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+ struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+ char *name = chan_id;
+
+ /* Check that the channel is not taken! */
+ if (!strcmp(plchan->name, name))
+ return true;
+
+ return false;
+}
+
+/*
+ * Just check that the device is there and active
+ * TODO: turn this bit on/off depending on the number of
+ * physical channels actually used, if it is zero... well
+ * shut it off. That will save some power. Cut the clock
+ * at the same time.
+ */
+static void pl08x_ensure_on(struct pl08x_driver_data *pl08x)
+{
+ u32 val;
+
+ val = readl(pl08x->base + PL080_CONFIG);
+ val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE);
+ /* We implictly clear bit 1 and that means little-endian mode */
+ val |= PL080_CONFIG_ENABLE;
+ writel(val, pl08x->base + PL080_CONFIG);
+}
+
+static void pl08x_tasklet(unsigned long data)
+{
+ struct pl08x_dma_chan *plchan = (struct pl08x_dma_chan *) data;
+ struct pl08x_phy_chan *phychan = plchan->phychan;
+ struct pl08x_driver_data *pl08x = plchan->host;
+
+ if (!plchan)
+ BUG();
+
+ spin_lock(&plchan->lock);
+
+ if (plchan->at) {
+ dma_async_tx_callback callback =
+ plchan->at->tx.callback;
+ void *callback_param =
+ plchan->at->tx.callback_param;
+
+ /*
+ * Update last completed
+ */
+ plchan->lc =
+ (plchan->at->tx.cookie);
+
+ /*
+ * Callback to signal completion
+ */
+ if (callback)
+ callback(callback_param);
+
+ /*
+ * Device callbacks should NOT clear
+ * the current transaction on the channel
+ * Linus: sometimes they should?
+ */
+ if (!plchan->at)
+ BUG();
+
+ /*
+ * Free the descriptor if it's not for a device
+ * using a circular buffer
+ */
+ if (!plchan->at->cd->circular_buffer) {
+ pl08x_free_txd(pl08x, plchan->at);
+ plchan->at = NULL;
+ }
+ /*
+ * else descriptor for circular
+ * buffers only freed when
+ * client has disabled dma
+ */
+ }
+ /*
+ * If a new descriptor is queued, set it up
+ * plchan->at is NULL here
+ */
+ if (!list_empty(&plchan->desc_list)) {
+ struct pl08x_txd *next;
+
+ next = list_first_entry(&plchan->desc_list,
+ struct pl08x_txd,
+ node);
+ list_del(&next->node);
+ plchan->at = next;
+ /* Configure the physical channel for the next txd */
+ pl08x_config_phychan_for_txd(plchan);
+ pl08x_set_cregs(pl08x, plchan->phychan);
+ pl08x_enable_phy_chan(pl08x, plchan->phychan);
+ } else {
+ struct pl08x_dma_chan *waiting = NULL;
+
+ /*
+ * No more jobs, so free up the physical channel
+ * Free any allocated signal on slave transfers too
+ */
+ if ((phychan->signal >= 0) && pl08x->pd->put_signal) {
+ pl08x->pd->put_signal(plchan);
+ phychan->signal = -1;
+ }
+ pl08x_put_phy_channel(pl08x, phychan);
+ plchan->phychan = NULL;
+ plchan->state = PL08X_CHAN_IDLE;
+
+ /*
+ * And NOW before anyone else can grab that free:d
+ * up physical channel, see if there is some memcpy
+ * pending that seriously needs to start because of
+ * being stacked up while we were choking the
+ * physical channels with data.
+ */
+ list_for_each_entry(waiting, &pl08x->memcpy.channels,
+ chan.device_node) {
+ if (waiting->state == PL08X_CHAN_WAITING &&
+ waiting->waiting != NULL) {
+ int ret;
+
+ /* This should REALLY not fail now */
+ ret = prep_phy_channel(waiting,
+ waiting->waiting);
+ BUG_ON(ret);
+ waiting->state = PL08X_CHAN_RUNNING;
+ waiting->waiting = NULL;
+ pl08x_issue_pending(&waiting->chan);
+ break;
+ }
+ }
+ }
+
+ spin_unlock(&plchan->lock);
+}
+
+static irqreturn_t pl08x_irq(int irq, void *dev)
+{
+ struct pl08x_driver_data *pl08x = dev;
+ u32 mask = 0;
+ u32 val;
+ int i;
+
+ val = readl(pl08x->base + PL080_ERR_STATUS);
+ if (val) {
+ /*
+ * An error interrupt (on one or more channels)
+ */
+ dev_err(&pl08x->adev->dev,
+ "%s error interrupt, register value 0x%08x\n",
+ __func__, val);
+ /*
+ * Simply clear ALL PL08X error interrupts,
+ * regardless of channel and cause
+ * FIXME: should be 0x00000003 on PL081 really.
+ */
+ writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+ }
+ val = readl(pl08x->base + PL080_INT_STATUS);
+ for (i = 0; i < pl08x->vd->channels; i++) {
+ if ((1 << i) & val) {
+ /* Locate physical channel */
+ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
+ struct pl08x_dma_chan *plchan = phychan->serving;
+
+ /* Schedule tasklet on this channel */
+ tasklet_schedule(&plchan->tasklet);
+
+ mask |= (1 << i);
+ }
+ }
+ /*
+ * Clear only the terminal interrupts on channels we processed
+ */
+ writel(mask, pl08x->base + PL080_TC_CLEAR);
+
+ return mask ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/*
+ * Initialise the DMAC memcpy/slave channels.
+ * Make a local wrapper to hold required data
+ */
+static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
+ struct dma_device *dmadev,
+ unsigned int channels,
+ bool slave)
+{
+ struct pl08x_dma_chan *chan;
+ int i;
+
+ INIT_LIST_HEAD(&dmadev->channels);
+ /*
+ * Register as many many memcpy as we have physical channels,
+ * we won't always be able to use all but the code will have
+ * to cope with that situation.
+ */
+ for (i = 0; i < channels; i++) {
+ chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL);
+ if (!chan) {
+ dev_err(&pl08x->adev->dev,
+ "%s no memory for channel\n", __func__);
+ return -ENOMEM;
+ }
+
+ chan->host = pl08x;
+ chan->state = PL08X_CHAN_IDLE;
+
+ if (slave) {
+ chan->slave = true;
+ chan->name = pl08x->pd->slave_channels[i].bus_id;
+ chan->cd = &pl08x->pd->slave_channels[i];
+ } else {
+ chan->cd = &pl08x->pd->memcpy_channel;
+ chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
+ if (!chan->name) {
+ kfree(chan);
+ return -ENOMEM;
+ }
+ }
+ dev_info(&pl08x->adev->dev,
+ "initialize virtual channel \"%s\"\n",
+ chan->name);
+
+ chan->chan.device = dmadev;
+ atomic_set(&chan->last_issued, 0);
+ chan->lc = atomic_read(&chan->last_issued);
+
+ spin_lock_init(&chan->lock);
+ INIT_LIST_HEAD(&chan->desc_list);
+ tasklet_init(&chan->tasklet, pl08x_tasklet,
+ (unsigned long) chan);
+
+ list_add_tail(&chan->chan.device_node, &dmadev->channels);
+ }
+ dev_info(&pl08x->adev->dev, "initialized %d virtual %s channels\n",
+ i, slave ? "slave" : "memcpy");
+ return i;
+}
+
+static void pl08x_free_virtual_channels(struct dma_device *dmadev)
+{
+ struct pl08x_dma_chan *chan = NULL;
+ struct pl08x_dma_chan *next;
+
+ list_for_each_entry_safe(chan,
+ next, &dmadev->channels, chan.device_node) {
+ list_del(&chan->chan.device_node);
+ kfree(chan);
+ }
+}
+
+#ifdef CONFIG_DEBUG_FS
+static const char *pl08x_state_str(enum pl08x_dma_chan_state state)
+{
+ switch (state) {
+ case PL08X_CHAN_IDLE:
+ return "idle";
+ case PL08X_CHAN_RUNNING:
+ return "running";
+ case PL08X_CHAN_PAUSED:
+ return "paused";
+ case PL08X_CHAN_WAITING:
+ return "waiting";
+ default:
+ break;
+ }
+ return "UNKNOWN STATE";
+}
+
+static int pl08x_debugfs_show(struct seq_file *s, void *data)
+{
+ struct pl08x_driver_data *pl08x = s->private;
+ struct pl08x_dma_chan *chan;
+ struct pl08x_phy_chan *ch;
+ unsigned long flags;
+ int i;
+
+ seq_printf(s, "PL08x physical channels:\n");
+ seq_printf(s, "CHANNEL:\tUSER:\n");
+ seq_printf(s, "--------\t-----\n");
+ for (i = 0; i < pl08x->vd->channels; i++) {
+ struct pl08x_dma_chan *virt_chan;
+
+ ch = &pl08x->phy_chans[i];
+
+ spin_lock_irqsave(&ch->lock, flags);
+ virt_chan = ch->serving;
+
+ seq_printf(s, "%d\t\t%s\n",
+ ch->id, virt_chan ? virt_chan->name : "(none)");
+
+ spin_unlock_irqrestore(&ch->lock, flags);
+ }
+
+ seq_printf(s, "\nPL08x virtual memcpy channels:\n");
+ seq_printf(s, "CHANNEL:\tSTATE:\n");
+ seq_printf(s, "--------\t------\n");
+ list_for_each_entry(chan, &pl08x->memcpy.channels, chan.device_node) {
+ seq_printf(s, "%s\t\t\%s\n", chan->name,
+ pl08x_state_str(chan->state));
+ }
+
+ seq_printf(s, "\nPL08x virtual slave channels:\n");
+ seq_printf(s, "CHANNEL:\tSTATE:\n");
+ seq_printf(s, "--------\t------\n");
+ list_for_each_entry(chan, &pl08x->slave.channels, chan.device_node) {
+ seq_printf(s, "%s\t\t\%s\n", chan->name,
+ pl08x_state_str(chan->state));
+ }
+
+ return 0;
+}
+
+static int pl08x_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pl08x_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations pl08x_debugfs_operations = {
+ .open = pl08x_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
+{
+ /* Expose a simple debugfs interface to view all clocks */
+ (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO,
+ NULL, pl08x,
+ &pl08x_debugfs_operations);
+}
+
+#else
+static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
+{
+}
+#endif
+
+static int pl08x_probe(struct amba_device *adev, struct amba_id *id)
+{
+ struct pl08x_driver_data *pl08x;
+ struct vendor_data *vd = id->data;
+ int ret = 0;
+ int i;
+
+ ret = amba_request_regions(adev, NULL);
+ if (ret)
+ return ret;
+
+ /* Create the driver state holder */
+ pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL);
+ if (!pl08x) {
+ ret = -ENOMEM;
+ goto out_no_pl08x;
+ }
+
+ /* Initialize memcpy engine */
+ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask);
+ pl08x->memcpy.dev = &adev->dev;
+ pl08x->memcpy.device_alloc_chan_resources = pl08x_alloc_chan_resources;
+ pl08x->memcpy.device_free_chan_resources = pl08x_free_chan_resources;
+ pl08x->memcpy.device_prep_dma_memcpy = pl08x_prep_dma_memcpy;
+ pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
+ pl08x->memcpy.device_tx_status = pl08x_dma_tx_status;
+ pl08x->memcpy.device_issue_pending = pl08x_issue_pending;
+ pl08x->memcpy.device_control = pl08x_control;
+
+ /* Initialize slave engine */
+ dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
+ pl08x->slave.dev = &adev->dev;
+ pl08x->slave.device_alloc_chan_resources = pl08x_alloc_chan_resources;
+ pl08x->slave.device_free_chan_resources = pl08x_free_chan_resources;
+ pl08x->slave.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
+ pl08x->slave.device_tx_status = pl08x_dma_tx_status;
+ pl08x->slave.device_issue_pending = pl08x_issue_pending;
+ pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
+ pl08x->slave.device_control = pl08x_control;
+
+ /* Get the platform data */
+ pl08x->pd = dev_get_platdata(&adev->dev);
+ if (!pl08x->pd) {
+ dev_err(&adev->dev, "no platform data supplied\n");
+ goto out_no_platdata;
+ }
+
+ /* Assign useful pointers to the driver state */
+ pl08x->adev = adev;
+ pl08x->vd = vd;
+
+ /* A DMA memory pool for LLIs, align on 1-byte boundary */
+ pl08x->pool = dma_pool_create(DRIVER_NAME, &pl08x->adev->dev,
+ PL08X_LLI_TSFR_SIZE, PL08X_ALIGN, 0);
+ if (!pl08x->pool) {
+ ret = -ENOMEM;
+ goto out_no_lli_pool;
+ }
+
+ spin_lock_init(&pl08x->lock);
+
+ pl08x->base = ioremap(adev->res.start, resource_size(&adev->res));
+ if (!pl08x->base) {
+ ret = -ENOMEM;
+ goto out_no_ioremap;
+ }
+
+ /* Turn on the PL08x */
+ pl08x_ensure_on(pl08x);
+
+ /*
+ * Attach the interrupt handler
+ */
+ writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR);
+ writel(0x000000FF, pl08x->base + PL080_TC_CLEAR);
+
+ ret = request_irq(adev->irq[0], pl08x_irq, IRQF_DISABLED,
+ vd->name, pl08x);
+ if (ret) {
+ dev_err(&adev->dev, "%s failed to request interrupt %d\n",
+ __func__, adev->irq[0]);
+ goto out_no_irq;
+ }
+
+ /* Initialize physical channels */
+ pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)),
+ GFP_KERNEL);
+ if (!pl08x->phy_chans) {
+ dev_err(&adev->dev, "%s failed to allocate "
+ "physical channel holders\n",
+ __func__);
+ goto out_no_phychans;
+ }
+
+ for (i = 0; i < vd->channels; i++) {
+ struct pl08x_phy_chan *ch = &pl08x->phy_chans[i];
+
+ ch->id = i;
+ ch->base = pl08x->base + PL080_Cx_BASE(i);
+ spin_lock_init(&ch->lock);
+ ch->serving = NULL;
+ ch->signal = -1;
+ dev_info(&adev->dev,
+ "physical channel %d is %s\n", i,
+ pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE");
+ }
+
+ /* Register as many memcpy channels as there are physical channels */
+ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->memcpy,
+ pl08x->vd->channels, false);
+ if (ret <= 0) {
+ dev_warn(&pl08x->adev->dev,
+ "%s failed to enumerate memcpy channels - %d\n",
+ __func__, ret);
+ goto out_no_memcpy;
+ }
+ pl08x->memcpy.chancnt = ret;
+
+ /* Register slave channels */
+ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
+ pl08x->pd->num_slave_channels,
+ true);
+ if (ret <= 0) {
+ dev_warn(&pl08x->adev->dev,
+ "%s failed to enumerate slave channels - %d\n",
+ __func__, ret);
+ goto out_no_slave;
+ }
+ pl08x->slave.chancnt = ret;
+
+ ret = dma_async_device_register(&pl08x->memcpy);
+ if (ret) {
+ dev_warn(&pl08x->adev->dev,
+ "%s failed to register memcpy as an async device - %d\n",
+ __func__, ret);
+ goto out_no_memcpy_reg;
+ }
+
+ ret = dma_async_device_register(&pl08x->slave);
+ if (ret) {
+ dev_warn(&pl08x->adev->dev,
+ "%s failed to register slave as an async device - %d\n",
+ __func__, ret);
+ goto out_no_slave_reg;
+ }
+
+ amba_set_drvdata(adev, pl08x);
+ init_pl08x_debugfs(pl08x);
+ dev_info(&pl08x->adev->dev, "ARM(R) %s DMA block initialized @%08x\n",
+ vd->name, adev->res.start);
+ return 0;
+
+out_no_slave_reg:
+ dma_async_device_unregister(&pl08x->memcpy);
+out_no_memcpy_reg:
+ pl08x_free_virtual_channels(&pl08x->slave);
+out_no_slave:
+ pl08x_free_virtual_channels(&pl08x->memcpy);
+out_no_memcpy:
+ kfree(pl08x->phy_chans);
+out_no_phychans:
+ free_irq(adev->irq[0], pl08x);
+out_no_irq:
+ iounmap(pl08x->base);
+out_no_ioremap:
+ dma_pool_destroy(pl08x->pool);
+out_no_lli_pool:
+out_no_platdata:
+ kfree(pl08x);
+out_no_pl08x:
+ amba_release_regions(adev);
+ return ret;
+}
+
+/* PL080 has 8 channels and the PL080 have just 2 */
+static struct vendor_data vendor_pl080 = {
+ .name = "PL080",
+ .channels = 8,
+ .dualmaster = true,
+};
+
+static struct vendor_data vendor_pl081 = {
+ .name = "PL081",
+ .channels = 2,
+ .dualmaster = false,
+};
+
+static struct amba_id pl08x_ids[] = {
+ /* PL080 */
+ {
+ .id = 0x00041080,
+ .mask = 0x000fffff,
+ .data = &vendor_pl080,
+ },
+ /* PL081 */
+ {
+ .id = 0x00041081,
+ .mask = 0x000fffff,
+ .data = &vendor_pl081,
+ },
+ /* Nomadik 8815 PL080 variant */
+ {
+ .id = 0x00280880,
+ .mask = 0x00ffffff,
+ .data = &vendor_pl080,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl08x_amba_driver = {
+ .drv.name = DRIVER_NAME,
+ .id_table = pl08x_ids,
+ .probe = pl08x_probe,
+};
+
+static int __init pl08x_init(void)
+{
+ int retval;
+ retval = amba_driver_register(&pl08x_amba_driver);
+ if (retval)
+ printk(KERN_WARNING DRIVER_NAME
+ "failed to register as an amba device (%d)\n",
+ retval);
+ return retval;
+}
+subsys_initcall(pl08x_init);
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index e5e79ce..235153c 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -690,6 +690,8 @@
!device->device_prep_dma_memset);
BUG_ON(dma_has_cap(DMA_INTERRUPT, device->cap_mask) &&
!device->device_prep_dma_interrupt);
+ BUG_ON(dma_has_cap(DMA_SG, device->cap_mask) &&
+ !device->device_prep_dma_sg);
BUG_ON(dma_has_cap(DMA_SLAVE, device->cap_mask) &&
!device->device_prep_slave_sg);
BUG_ON(dma_has_cap(DMA_CYCLIC, device->cap_mask) &&
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index cea08be..286c3ac 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -35,9 +35,10 @@
#include <linux/dmapool.h>
#include <linux/of_platform.h>
-#include <asm/fsldma.h>
#include "fsldma.h"
+static const char msg_ld_oom[] = "No free memory for link descriptor\n";
+
static void dma_init(struct fsldma_chan *chan)
{
/* Reset the channel */
@@ -499,7 +500,7 @@
new = fsl_dma_alloc_descriptor(chan);
if (!new) {
- dev_err(chan->dev, "No free memory for link descriptor\n");
+ dev_err(chan->dev, msg_ld_oom);
return NULL;
}
@@ -536,8 +537,7 @@
/* Allocate the link descriptor from DMA pool */
new = fsl_dma_alloc_descriptor(chan);
if (!new) {
- dev_err(chan->dev,
- "No free memory for link descriptor\n");
+ dev_err(chan->dev, msg_ld_oom);
goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
@@ -583,6 +583,125 @@
return NULL;
}
+static struct dma_async_tx_descriptor *fsl_dma_prep_sg(struct dma_chan *dchan,
+ struct scatterlist *dst_sg, unsigned int dst_nents,
+ struct scatterlist *src_sg, unsigned int src_nents,
+ unsigned long flags)
+{
+ struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
+ struct fsldma_chan *chan = to_fsl_chan(dchan);
+ size_t dst_avail, src_avail;
+ dma_addr_t dst, src;
+ size_t len;
+
+ /* basic sanity checks */
+ if (dst_nents == 0 || src_nents == 0)
+ return NULL;
+
+ if (dst_sg == NULL || src_sg == NULL)
+ return NULL;
+
+ /*
+ * TODO: should we check that both scatterlists have the same
+ * TODO: number of bytes in total? Is that really an error?
+ */
+
+ /* get prepared for the loop */
+ dst_avail = sg_dma_len(dst_sg);
+ src_avail = sg_dma_len(src_sg);
+
+ /* run until we are out of scatterlist entries */
+ while (true) {
+
+ /* create the largest transaction possible */
+ len = min_t(size_t, src_avail, dst_avail);
+ len = min_t(size_t, len, FSL_DMA_BCR_MAX_CNT);
+ if (len == 0)
+ goto fetch;
+
+ dst = sg_dma_address(dst_sg) + sg_dma_len(dst_sg) - dst_avail;
+ src = sg_dma_address(src_sg) + sg_dma_len(src_sg) - src_avail;
+
+ /* allocate and populate the descriptor */
+ new = fsl_dma_alloc_descriptor(chan);
+ if (!new) {
+ dev_err(chan->dev, msg_ld_oom);
+ goto fail;
+ }
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+ set_desc_cnt(chan, &new->hw, len);
+ set_desc_src(chan, &new->hw, src);
+ set_desc_dst(chan, &new->hw, dst);
+
+ if (!first)
+ first = new;
+ else
+ set_desc_next(chan, &prev->hw, new->async_tx.phys);
+
+ new->async_tx.cookie = 0;
+ async_tx_ack(&new->async_tx);
+ prev = new;
+
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+
+ /* update metadata */
+ dst_avail -= len;
+ src_avail -= len;
+
+fetch:
+ /* fetch the next dst scatterlist entry */
+ if (dst_avail == 0) {
+
+ /* no more entries: we're done */
+ if (dst_nents == 0)
+ break;
+
+ /* fetch the next entry: if there are no more: done */
+ dst_sg = sg_next(dst_sg);
+ if (dst_sg == NULL)
+ break;
+
+ dst_nents--;
+ dst_avail = sg_dma_len(dst_sg);
+ }
+
+ /* fetch the next src scatterlist entry */
+ if (src_avail == 0) {
+
+ /* no more entries: we're done */
+ if (src_nents == 0)
+ break;
+
+ /* fetch the next entry: if there are no more: done */
+ src_sg = sg_next(src_sg);
+ if (src_sg == NULL)
+ break;
+
+ src_nents--;
+ src_avail = sg_dma_len(src_sg);
+ }
+ }
+
+ new->async_tx.flags = flags; /* client is in control of this ack */
+ new->async_tx.cookie = -EBUSY;
+
+ /* Set End-of-link to the last link descriptor of new list */
+ set_ld_eol(chan, new);
+
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ fsldma_free_desc_list_reverse(chan, &first->tx_list);
+ return NULL;
+}
+
/**
* fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
* @chan: DMA channel
@@ -599,207 +718,70 @@
struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
enum dma_data_direction direction, unsigned long flags)
{
- struct fsldma_chan *chan;
- struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
- struct fsl_dma_slave *slave;
- size_t copy;
-
- int i;
- struct scatterlist *sg;
- size_t sg_used;
- size_t hw_used;
- struct fsl_dma_hw_addr *hw;
- dma_addr_t dma_dst, dma_src;
-
- if (!dchan)
- return NULL;
-
- if (!dchan->private)
- return NULL;
-
- chan = to_fsl_chan(dchan);
- slave = dchan->private;
-
- if (list_empty(&slave->addresses))
- return NULL;
-
- hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
- hw_used = 0;
-
/*
- * Build the hardware transaction to copy from the scatterlist to
- * the hardware, or from the hardware to the scatterlist
+ * This operation is not supported on the Freescale DMA controller
*
- * If you are copying from the hardware to the scatterlist and it
- * takes two hardware entries to fill an entire page, then both
- * hardware entries will be coalesced into the same page
- *
- * If you are copying from the scatterlist to the hardware and a
- * single page can fill two hardware entries, then the data will
- * be read out of the page into the first hardware entry, and so on
+ * However, we need to provide the function pointer to allow the
+ * device_control() method to work.
*/
- for_each_sg(sgl, sg, sg_len, i) {
- sg_used = 0;
-
- /* Loop until the entire scatterlist entry is used */
- while (sg_used < sg_dma_len(sg)) {
-
- /*
- * If we've used up the current hardware address/length
- * pair, we need to load a new one
- *
- * This is done in a while loop so that descriptors with
- * length == 0 will be skipped
- */
- while (hw_used >= hw->length) {
-
- /*
- * If the current hardware entry is the last
- * entry in the list, we're finished
- */
- if (list_is_last(&hw->entry, &slave->addresses))
- goto finished;
-
- /* Get the next hardware address/length pair */
- hw = list_entry(hw->entry.next,
- struct fsl_dma_hw_addr, entry);
- hw_used = 0;
- }
-
- /* Allocate the link descriptor from DMA pool */
- new = fsl_dma_alloc_descriptor(chan);
- if (!new) {
- dev_err(chan->dev, "No free memory for "
- "link descriptor\n");
- goto fail;
- }
-#ifdef FSL_DMA_LD_DEBUG
- dev_dbg(chan->dev, "new link desc alloc %p\n", new);
-#endif
-
- /*
- * Calculate the maximum number of bytes to transfer,
- * making sure it is less than the DMA controller limit
- */
- copy = min_t(size_t, sg_dma_len(sg) - sg_used,
- hw->length - hw_used);
- copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
-
- /*
- * DMA_FROM_DEVICE
- * from the hardware to the scatterlist
- *
- * DMA_TO_DEVICE
- * from the scatterlist to the hardware
- */
- if (direction == DMA_FROM_DEVICE) {
- dma_src = hw->address + hw_used;
- dma_dst = sg_dma_address(sg) + sg_used;
- } else {
- dma_src = sg_dma_address(sg) + sg_used;
- dma_dst = hw->address + hw_used;
- }
-
- /* Fill in the descriptor */
- set_desc_cnt(chan, &new->hw, copy);
- set_desc_src(chan, &new->hw, dma_src);
- set_desc_dst(chan, &new->hw, dma_dst);
-
- /*
- * If this is not the first descriptor, chain the
- * current descriptor after the previous descriptor
- */
- if (!first) {
- first = new;
- } else {
- set_desc_next(chan, &prev->hw,
- new->async_tx.phys);
- }
-
- new->async_tx.cookie = 0;
- async_tx_ack(&new->async_tx);
-
- prev = new;
- sg_used += copy;
- hw_used += copy;
-
- /* Insert the link descriptor into the LD ring */
- list_add_tail(&new->node, &first->tx_list);
- }
- }
-
-finished:
-
- /* All of the hardware address/length pairs had length == 0 */
- if (!first || !new)
- return NULL;
-
- new->async_tx.flags = flags;
- new->async_tx.cookie = -EBUSY;
-
- /* Set End-of-link to the last link descriptor of new list */
- set_ld_eol(chan, new);
-
- /* Enable extra controller features */
- if (chan->set_src_loop_size)
- chan->set_src_loop_size(chan, slave->src_loop_size);
-
- if (chan->set_dst_loop_size)
- chan->set_dst_loop_size(chan, slave->dst_loop_size);
-
- if (chan->toggle_ext_start)
- chan->toggle_ext_start(chan, slave->external_start);
-
- if (chan->toggle_ext_pause)
- chan->toggle_ext_pause(chan, slave->external_pause);
-
- if (chan->set_request_count)
- chan->set_request_count(chan, slave->request_count);
-
- return &first->async_tx;
-
-fail:
- /* If first was not set, then we failed to allocate the very first
- * descriptor, and we're done */
- if (!first)
- return NULL;
-
- /*
- * First is set, so all of the descriptors we allocated have been added
- * to first->tx_list, INCLUDING "first" itself. Therefore we
- * must traverse the list backwards freeing each descriptor in turn
- *
- * We're re-using variables for the loop, oh well
- */
- fsldma_free_desc_list_reverse(chan, &first->tx_list);
return NULL;
}
static int fsl_dma_device_control(struct dma_chan *dchan,
enum dma_ctrl_cmd cmd, unsigned long arg)
{
+ struct dma_slave_config *config;
struct fsldma_chan *chan;
unsigned long flags;
-
- /* Only supports DMA_TERMINATE_ALL */
- if (cmd != DMA_TERMINATE_ALL)
- return -ENXIO;
+ int size;
if (!dchan)
return -EINVAL;
chan = to_fsl_chan(dchan);
- /* Halt the DMA engine */
- dma_halt(chan);
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ /* Halt the DMA engine */
+ dma_halt(chan);
- spin_lock_irqsave(&chan->desc_lock, flags);
+ spin_lock_irqsave(&chan->desc_lock, flags);
- /* Remove and free all of the descriptors in the LD queue */
- fsldma_free_desc_list(chan, &chan->ld_pending);
- fsldma_free_desc_list(chan, &chan->ld_running);
+ /* Remove and free all of the descriptors in the LD queue */
+ fsldma_free_desc_list(chan, &chan->ld_pending);
+ fsldma_free_desc_list(chan, &chan->ld_running);
- spin_unlock_irqrestore(&chan->desc_lock, flags);
+ spin_unlock_irqrestore(&chan->desc_lock, flags);
+ return 0;
+
+ case DMA_SLAVE_CONFIG:
+ config = (struct dma_slave_config *)arg;
+
+ /* make sure the channel supports setting burst size */
+ if (!chan->set_request_count)
+ return -ENXIO;
+
+ /* we set the controller burst size depending on direction */
+ if (config->direction == DMA_TO_DEVICE)
+ size = config->dst_addr_width * config->dst_maxburst;
+ else
+ size = config->src_addr_width * config->src_maxburst;
+
+ chan->set_request_count(chan, size);
+ return 0;
+
+ case FSLDMA_EXTERNAL_START:
+
+ /* make sure the channel supports external start */
+ if (!chan->toggle_ext_start)
+ return -ENXIO;
+
+ chan->toggle_ext_start(chan, arg);
+ return 0;
+
+ default:
+ return -ENXIO;
+ }
return 0;
}
@@ -1327,11 +1309,13 @@
dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+ dma_cap_set(DMA_SG, fdev->common.cap_mask);
dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
+ fdev->common.device_prep_dma_sg = fsl_dma_prep_sg;
fdev->common.device_tx_status = fsl_tx_status;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index c2591e8..338bc4e 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -25,6 +25,7 @@
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
#include <linux/intel_mid_dma.h>
#define MAX_CHAN 4 /*max ch across controllers*/
@@ -91,13 +92,13 @@
int byte_width = 0, block_ts = 0;
switch (tx_width) {
- case LNW_DMA_WIDTH_8BIT:
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
byte_width = 1;
break;
- case LNW_DMA_WIDTH_16BIT:
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
byte_width = 2;
break;
- case LNW_DMA_WIDTH_32BIT:
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
default:
byte_width = 4;
break;
@@ -247,16 +248,17 @@
struct middma_device *mid = to_middma_device(midc->chan.device);
/* channel is idle */
- if (midc->in_use && test_ch_en(midc->dma_base, midc->ch_id)) {
+ if (midc->busy && test_ch_en(midc->dma_base, midc->ch_id)) {
/*error*/
pr_err("ERR_MDMA: channel is busy in start\n");
/* The tasklet will hopefully advance the queue... */
return;
}
-
+ midc->busy = true;
/*write registers and en*/
iowrite32(first->sar, midc->ch_regs + SAR);
iowrite32(first->dar, midc->ch_regs + DAR);
+ iowrite32(first->lli_phys, midc->ch_regs + LLP);
iowrite32(first->cfg_hi, midc->ch_regs + CFG_HIGH);
iowrite32(first->cfg_lo, midc->ch_regs + CFG_LOW);
iowrite32(first->ctl_lo, midc->ch_regs + CTL_LOW);
@@ -264,9 +266,9 @@
pr_debug("MDMA:TX SAR %x,DAR %x,CFGL %x,CFGH %x,CTLH %x, CTLL %x\n",
(int)first->sar, (int)first->dar, first->cfg_hi,
first->cfg_lo, first->ctl_hi, first->ctl_lo);
+ first->status = DMA_IN_PROGRESS;
iowrite32(ENABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
- first->status = DMA_IN_PROGRESS;
}
/**
@@ -283,20 +285,36 @@
{
struct dma_async_tx_descriptor *txd = &desc->txd;
dma_async_tx_callback callback_txd = NULL;
+ struct intel_mid_dma_lli *llitem;
void *param_txd = NULL;
midc->completed = txd->cookie;
callback_txd = txd->callback;
param_txd = txd->callback_param;
- list_move(&desc->desc_node, &midc->free_list);
-
+ if (desc->lli != NULL) {
+ /*clear the DONE bit of completed LLI in memory*/
+ llitem = desc->lli + desc->current_lli;
+ llitem->ctl_hi &= CLEAR_DONE;
+ if (desc->current_lli < desc->lli_length-1)
+ (desc->current_lli)++;
+ else
+ desc->current_lli = 0;
+ }
spin_unlock_bh(&midc->lock);
if (callback_txd) {
pr_debug("MDMA: TXD callback set ... calling\n");
callback_txd(param_txd);
- spin_lock_bh(&midc->lock);
- return;
+ }
+ if (midc->raw_tfr) {
+ desc->status = DMA_SUCCESS;
+ if (desc->lli != NULL) {
+ pci_pool_free(desc->lli_pool, desc->lli,
+ desc->lli_phys);
+ pci_pool_destroy(desc->lli_pool);
+ }
+ list_move(&desc->desc_node, &midc->free_list);
+ midc->busy = false;
}
spin_lock_bh(&midc->lock);
@@ -317,14 +335,89 @@
/*tx is complete*/
list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
- if (desc->status == DMA_IN_PROGRESS) {
- desc->status = DMA_SUCCESS;
+ if (desc->status == DMA_IN_PROGRESS)
midc_descriptor_complete(midc, desc);
- }
}
return;
-}
+ }
+/**
+ * midc_lli_fill_sg - Helper function to convert
+ * SG list to Linked List Items.
+ *@midc: Channel
+ *@desc: DMA descriptor
+ *@sglist: Pointer to SG list
+ *@sglen: SG list length
+ *@flags: DMA transaction flags
+ *
+ * Walk through the SG list and convert the SG list into Linked
+ * List Items (LLI).
+ */
+static int midc_lli_fill_sg(struct intel_mid_dma_chan *midc,
+ struct intel_mid_dma_desc *desc,
+ struct scatterlist *sglist,
+ unsigned int sglen,
+ unsigned int flags)
+{
+ struct intel_mid_dma_slave *mids;
+ struct scatterlist *sg;
+ dma_addr_t lli_next, sg_phy_addr;
+ struct intel_mid_dma_lli *lli_bloc_desc;
+ union intel_mid_dma_ctl_lo ctl_lo;
+ union intel_mid_dma_ctl_hi ctl_hi;
+ int i;
+ pr_debug("MDMA: Entered midc_lli_fill_sg\n");
+ mids = midc->mid_slave;
+
+ lli_bloc_desc = desc->lli;
+ lli_next = desc->lli_phys;
+
+ ctl_lo.ctl_lo = desc->ctl_lo;
+ ctl_hi.ctl_hi = desc->ctl_hi;
+ for_each_sg(sglist, sg, sglen, i) {
+ /*Populate CTL_LOW and LLI values*/
+ if (i != sglen - 1) {
+ lli_next = lli_next +
+ sizeof(struct intel_mid_dma_lli);
+ } else {
+ /*Check for circular list, otherwise terminate LLI to ZERO*/
+ if (flags & DMA_PREP_CIRCULAR_LIST) {
+ pr_debug("MDMA: LLI is configured in circular mode\n");
+ lli_next = desc->lli_phys;
+ } else {
+ lli_next = 0;
+ ctl_lo.ctlx.llp_dst_en = 0;
+ ctl_lo.ctlx.llp_src_en = 0;
+ }
+ }
+ /*Populate CTL_HI values*/
+ ctl_hi.ctlx.block_ts = get_block_ts(sg->length,
+ desc->width,
+ midc->dma->block_size);
+ /*Populate SAR and DAR values*/
+ sg_phy_addr = sg_phys(sg);
+ if (desc->dirn == DMA_TO_DEVICE) {
+ lli_bloc_desc->sar = sg_phy_addr;
+ lli_bloc_desc->dar = mids->dma_slave.dst_addr;
+ } else if (desc->dirn == DMA_FROM_DEVICE) {
+ lli_bloc_desc->sar = mids->dma_slave.src_addr;
+ lli_bloc_desc->dar = sg_phy_addr;
+ }
+ /*Copy values into block descriptor in system memroy*/
+ lli_bloc_desc->llp = lli_next;
+ lli_bloc_desc->ctl_lo = ctl_lo.ctl_lo;
+ lli_bloc_desc->ctl_hi = ctl_hi.ctl_hi;
+
+ lli_bloc_desc++;
+ }
+ /*Copy very first LLI values to descriptor*/
+ desc->ctl_lo = desc->lli->ctl_lo;
+ desc->ctl_hi = desc->lli->ctl_hi;
+ desc->sar = desc->lli->sar;
+ desc->dar = desc->lli->dar;
+
+ return 0;
+}
/*****************************************************************************
DMA engine callback Functions*/
/**
@@ -349,12 +442,12 @@
desc->txd.cookie = cookie;
- if (list_empty(&midc->active_list)) {
- midc_dostart(midc, desc);
+ if (list_empty(&midc->active_list))
list_add_tail(&desc->desc_node, &midc->active_list);
- } else {
+ else
list_add_tail(&desc->desc_node, &midc->queue);
- }
+
+ midc_dostart(midc, desc);
spin_unlock_bh(&midc->lock);
return cookie;
@@ -414,6 +507,23 @@
return ret;
}
+static int dma_slave_control(struct dma_chan *chan, unsigned long arg)
+{
+ struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan);
+ struct dma_slave_config *slave = (struct dma_slave_config *)arg;
+ struct intel_mid_dma_slave *mid_slave;
+
+ BUG_ON(!midc);
+ BUG_ON(!slave);
+ pr_debug("MDMA: slave control called\n");
+
+ mid_slave = to_intel_mid_dma_slave(slave);
+
+ BUG_ON(!mid_slave);
+
+ midc->mid_slave = mid_slave;
+ return 0;
+}
/**
* intel_mid_dma_device_control - DMA device control
* @chan: chan for DMA control
@@ -428,49 +538,41 @@
struct intel_mid_dma_chan *midc = to_intel_mid_dma_chan(chan);
struct middma_device *mid = to_middma_device(chan->device);
struct intel_mid_dma_desc *desc, *_desc;
- LIST_HEAD(list);
+ union intel_mid_dma_cfg_lo cfg_lo;
+
+ if (cmd == DMA_SLAVE_CONFIG)
+ return dma_slave_control(chan, arg);
if (cmd != DMA_TERMINATE_ALL)
return -ENXIO;
spin_lock_bh(&midc->lock);
- if (midc->in_use == false) {
+ if (midc->busy == false) {
spin_unlock_bh(&midc->lock);
return 0;
}
- list_splice_init(&midc->free_list, &list);
- midc->descs_allocated = 0;
- midc->slave = NULL;
-
+ /*Suspend and disable the channel*/
+ cfg_lo.cfg_lo = ioread32(midc->ch_regs + CFG_LOW);
+ cfg_lo.cfgx.ch_susp = 1;
+ iowrite32(cfg_lo.cfg_lo, midc->ch_regs + CFG_LOW);
+ iowrite32(DISABLE_CHANNEL(midc->ch_id), mid->dma_base + DMA_CHAN_EN);
+ midc->busy = false;
/* Disable interrupts */
disable_dma_interrupt(midc);
+ midc->descs_allocated = 0;
spin_unlock_bh(&midc->lock);
- list_for_each_entry_safe(desc, _desc, &list, desc_node) {
- pr_debug("MDMA: freeing descriptor %p\n", desc);
- pci_pool_free(mid->dma_pool, desc, desc->txd.phys);
+ list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
+ if (desc->lli != NULL) {
+ pci_pool_free(desc->lli_pool, desc->lli,
+ desc->lli_phys);
+ pci_pool_destroy(desc->lli_pool);
+ }
+ list_move(&desc->desc_node, &midc->free_list);
}
return 0;
}
-/**
- * intel_mid_dma_prep_slave_sg - Prep slave sg txn
- * @chan: chan for DMA transfer
- * @sgl: scatter gather list
- * @sg_len: length of sg txn
- * @direction: DMA transfer dirtn
- * @flags: DMA flags
- *
- * Do DMA sg txn: NOT supported now
- */
-static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
- struct dma_chan *chan, struct scatterlist *sgl,
- unsigned int sg_len, enum dma_data_direction direction,
- unsigned long flags)
-{
- /*not supported now*/
- return NULL;
-}
/**
* intel_mid_dma_prep_memcpy - Prep memcpy txn
@@ -495,23 +597,24 @@
union intel_mid_dma_ctl_hi ctl_hi;
union intel_mid_dma_cfg_lo cfg_lo;
union intel_mid_dma_cfg_hi cfg_hi;
- enum intel_mid_dma_width width = 0;
+ enum dma_slave_buswidth width;
pr_debug("MDMA: Prep for memcpy\n");
- WARN_ON(!chan);
+ BUG_ON(!chan);
if (!len)
return NULL;
- mids = chan->private;
- WARN_ON(!mids);
-
midc = to_intel_mid_dma_chan(chan);
- WARN_ON(!midc);
+ BUG_ON(!midc);
+
+ mids = midc->mid_slave;
+ BUG_ON(!mids);
pr_debug("MDMA:called for DMA %x CH %d Length %zu\n",
midc->dma->pci_id, midc->ch_id, len);
pr_debug("MDMA:Cfg passed Mode %x, Dirn %x, HS %x, Width %x\n",
- mids->cfg_mode, mids->dirn, mids->hs_mode, mids->src_width);
+ mids->cfg_mode, mids->dma_slave.direction,
+ mids->hs_mode, mids->dma_slave.src_addr_width);
/*calculate CFG_LO*/
if (mids->hs_mode == LNW_DMA_SW_HS) {
@@ -530,13 +633,13 @@
if (midc->dma->pimr_mask) {
cfg_hi.cfgx.protctl = 0x0; /*default value*/
cfg_hi.cfgx.fifo_mode = 1;
- if (mids->dirn == DMA_TO_DEVICE) {
+ if (mids->dma_slave.direction == DMA_TO_DEVICE) {
cfg_hi.cfgx.src_per = 0;
if (mids->device_instance == 0)
cfg_hi.cfgx.dst_per = 3;
if (mids->device_instance == 1)
cfg_hi.cfgx.dst_per = 1;
- } else if (mids->dirn == DMA_FROM_DEVICE) {
+ } else if (mids->dma_slave.direction == DMA_FROM_DEVICE) {
if (mids->device_instance == 0)
cfg_hi.cfgx.src_per = 2;
if (mids->device_instance == 1)
@@ -552,7 +655,8 @@
/*calculate CTL_HI*/
ctl_hi.ctlx.reser = 0;
- width = mids->src_width;
+ ctl_hi.ctlx.done = 0;
+ width = mids->dma_slave.src_addr_width;
ctl_hi.ctlx.block_ts = get_block_ts(len, width, midc->dma->block_size);
pr_debug("MDMA:calc len %d for block size %d\n",
@@ -560,21 +664,21 @@
/*calculate CTL_LO*/
ctl_lo.ctl_lo = 0;
ctl_lo.ctlx.int_en = 1;
- ctl_lo.ctlx.dst_tr_width = mids->dst_width;
- ctl_lo.ctlx.src_tr_width = mids->src_width;
- ctl_lo.ctlx.dst_msize = mids->src_msize;
- ctl_lo.ctlx.src_msize = mids->dst_msize;
+ ctl_lo.ctlx.dst_tr_width = mids->dma_slave.dst_addr_width;
+ ctl_lo.ctlx.src_tr_width = mids->dma_slave.src_addr_width;
+ ctl_lo.ctlx.dst_msize = mids->dma_slave.src_maxburst;
+ ctl_lo.ctlx.src_msize = mids->dma_slave.dst_maxburst;
if (mids->cfg_mode == LNW_DMA_MEM_TO_MEM) {
ctl_lo.ctlx.tt_fc = 0;
ctl_lo.ctlx.sinc = 0;
ctl_lo.ctlx.dinc = 0;
} else {
- if (mids->dirn == DMA_TO_DEVICE) {
+ if (mids->dma_slave.direction == DMA_TO_DEVICE) {
ctl_lo.ctlx.sinc = 0;
ctl_lo.ctlx.dinc = 2;
ctl_lo.ctlx.tt_fc = 1;
- } else if (mids->dirn == DMA_FROM_DEVICE) {
+ } else if (mids->dma_slave.direction == DMA_FROM_DEVICE) {
ctl_lo.ctlx.sinc = 2;
ctl_lo.ctlx.dinc = 0;
ctl_lo.ctlx.tt_fc = 2;
@@ -597,7 +701,10 @@
desc->ctl_lo = ctl_lo.ctl_lo;
desc->ctl_hi = ctl_hi.ctl_hi;
desc->width = width;
- desc->dirn = mids->dirn;
+ desc->dirn = mids->dma_slave.direction;
+ desc->lli_phys = 0;
+ desc->lli = NULL;
+ desc->lli_pool = NULL;
return &desc->txd;
err_desc_get:
@@ -605,6 +712,85 @@
midc_desc_put(midc, desc);
return NULL;
}
+/**
+ * intel_mid_dma_prep_slave_sg - Prep slave sg txn
+ * @chan: chan for DMA transfer
+ * @sgl: scatter gather list
+ * @sg_len: length of sg txn
+ * @direction: DMA transfer dirtn
+ * @flags: DMA flags
+ *
+ * Prepares LLI based periphral transfer
+ */
+static struct dma_async_tx_descriptor *intel_mid_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_data_direction direction,
+ unsigned long flags)
+{
+ struct intel_mid_dma_chan *midc = NULL;
+ struct intel_mid_dma_slave *mids = NULL;
+ struct intel_mid_dma_desc *desc = NULL;
+ struct dma_async_tx_descriptor *txd = NULL;
+ union intel_mid_dma_ctl_lo ctl_lo;
+
+ pr_debug("MDMA: Prep for slave SG\n");
+
+ if (!sg_len) {
+ pr_err("MDMA: Invalid SG length\n");
+ return NULL;
+ }
+ midc = to_intel_mid_dma_chan(chan);
+ BUG_ON(!midc);
+
+ mids = midc->mid_slave;
+ BUG_ON(!mids);
+
+ if (!midc->dma->pimr_mask) {
+ pr_debug("MDMA: SG list is not supported by this controller\n");
+ return NULL;
+ }
+
+ pr_debug("MDMA: SG Length = %d, direction = %d, Flags = %#lx\n",
+ sg_len, direction, flags);
+
+ txd = intel_mid_dma_prep_memcpy(chan, 0, 0, sgl->length, flags);
+ if (NULL == txd) {
+ pr_err("MDMA: Prep memcpy failed\n");
+ return NULL;
+ }
+ desc = to_intel_mid_dma_desc(txd);
+ desc->dirn = direction;
+ ctl_lo.ctl_lo = desc->ctl_lo;
+ ctl_lo.ctlx.llp_dst_en = 1;
+ ctl_lo.ctlx.llp_src_en = 1;
+ desc->ctl_lo = ctl_lo.ctl_lo;
+ desc->lli_length = sg_len;
+ desc->current_lli = 0;
+ /* DMA coherent memory pool for LLI descriptors*/
+ desc->lli_pool = pci_pool_create("intel_mid_dma_lli_pool",
+ midc->dma->pdev,
+ (sizeof(struct intel_mid_dma_lli)*sg_len),
+ 32, 0);
+ if (NULL == desc->lli_pool) {
+ pr_err("MID_DMA:LLI pool create failed\n");
+ return NULL;
+ }
+
+ desc->lli = pci_pool_alloc(desc->lli_pool, GFP_KERNEL, &desc->lli_phys);
+ if (!desc->lli) {
+ pr_err("MID_DMA: LLI alloc failed\n");
+ pci_pool_destroy(desc->lli_pool);
+ return NULL;
+ }
+
+ midc_lli_fill_sg(midc, desc, sgl, sg_len, flags);
+ if (flags & DMA_PREP_INTERRUPT) {
+ iowrite32(UNMASK_INTR_REG(midc->ch_id),
+ midc->dma_base + MASK_BLOCK);
+ pr_debug("MDMA:Enabled Block interrupt\n");
+ }
+ return &desc->txd;
+}
/**
* intel_mid_dma_free_chan_resources - Frees dma resources
@@ -618,11 +804,11 @@
struct middma_device *mid = to_middma_device(chan->device);
struct intel_mid_dma_desc *desc, *_desc;
- if (true == midc->in_use) {
+ if (true == midc->busy) {
/*trying to free ch in use!!!!!*/
pr_err("ERR_MDMA: trying to free ch in use\n");
}
-
+ pm_runtime_put(&mid->pdev->dev);
spin_lock_bh(&midc->lock);
midc->descs_allocated = 0;
list_for_each_entry_safe(desc, _desc, &midc->active_list, desc_node) {
@@ -639,6 +825,7 @@
}
spin_unlock_bh(&midc->lock);
midc->in_use = false;
+ midc->busy = false;
/* Disable CH interrupts */
iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_BLOCK);
iowrite32(MASK_INTR_REG(midc->ch_id), mid->dma_base + MASK_ERR);
@@ -659,11 +846,20 @@
dma_addr_t phys;
int i = 0;
+ pm_runtime_get_sync(&mid->pdev->dev);
+
+ if (mid->state == SUSPENDED) {
+ if (dma_resume(mid->pdev)) {
+ pr_err("ERR_MDMA: resume failed");
+ return -EFAULT;
+ }
+ }
/* ASSERT: channel is idle */
if (test_ch_en(mid->dma_base, midc->ch_id)) {
/*ch is not idle*/
pr_err("ERR_MDMA: ch not idle\n");
+ pm_runtime_put(&mid->pdev->dev);
return -EIO;
}
midc->completed = chan->cookie = 1;
@@ -674,6 +870,7 @@
desc = pci_pool_alloc(mid->dma_pool, GFP_KERNEL, &phys);
if (!desc) {
pr_err("ERR_MDMA: desc failed\n");
+ pm_runtime_put(&mid->pdev->dev);
return -ENOMEM;
/*check*/
}
@@ -686,7 +883,8 @@
list_add_tail(&desc->desc_node, &midc->free_list);
}
spin_unlock_bh(&midc->lock);
- midc->in_use = false;
+ midc->in_use = true;
+ midc->busy = false;
pr_debug("MID_DMA: Desc alloc done ret: %d desc\n", i);
return i;
}
@@ -715,7 +913,7 @@
{
struct middma_device *mid = NULL;
struct intel_mid_dma_chan *midc = NULL;
- u32 status;
+ u32 status, raw_tfr, raw_block;
int i;
mid = (struct middma_device *)data;
@@ -724,8 +922,9 @@
return;
}
pr_debug("MDMA: in tasklet for device %x\n", mid->pci_id);
- status = ioread32(mid->dma_base + RAW_TFR);
- pr_debug("MDMA:RAW_TFR %x\n", status);
+ raw_tfr = ioread32(mid->dma_base + RAW_TFR);
+ raw_block = ioread32(mid->dma_base + RAW_BLOCK);
+ status = raw_tfr | raw_block;
status &= mid->intr_mask;
while (status) {
/*txn interrupt*/
@@ -741,15 +940,23 @@
}
pr_debug("MDMA:Tx complete interrupt %x, Ch No %d Index %d\n",
status, midc->ch_id, i);
+ midc->raw_tfr = raw_tfr;
+ midc->raw_block = raw_block;
+ spin_lock_bh(&midc->lock);
/*clearing this interrupts first*/
iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_TFR);
- iowrite32((1 << midc->ch_id), mid->dma_base + CLEAR_BLOCK);
-
- spin_lock_bh(&midc->lock);
+ if (raw_block) {
+ iowrite32((1 << midc->ch_id),
+ mid->dma_base + CLEAR_BLOCK);
+ }
midc_scan_descriptors(mid, midc);
pr_debug("MDMA:Scan of desc... complete, unmasking\n");
iowrite32(UNMASK_INTR_REG(midc->ch_id),
mid->dma_base + MASK_TFR);
+ if (raw_block) {
+ iowrite32(UNMASK_INTR_REG(midc->ch_id),
+ mid->dma_base + MASK_BLOCK);
+ }
spin_unlock_bh(&midc->lock);
}
@@ -804,9 +1011,14 @@
static irqreturn_t intel_mid_dma_interrupt(int irq, void *data)
{
struct middma_device *mid = data;
- u32 status;
+ u32 tfr_status, err_status;
int call_tasklet = 0;
+ tfr_status = ioread32(mid->dma_base + RAW_TFR);
+ err_status = ioread32(mid->dma_base + RAW_ERR);
+ if (!tfr_status && !err_status)
+ return IRQ_NONE;
+
/*DMA Interrupt*/
pr_debug("MDMA:Got an interrupt on irq %d\n", irq);
if (!mid) {
@@ -814,19 +1026,18 @@
return -EINVAL;
}
- status = ioread32(mid->dma_base + RAW_TFR);
- pr_debug("MDMA: Status %x, Mask %x\n", status, mid->intr_mask);
- status &= mid->intr_mask;
- if (status) {
+ pr_debug("MDMA: Status %x, Mask %x\n", tfr_status, mid->intr_mask);
+ tfr_status &= mid->intr_mask;
+ if (tfr_status) {
/*need to disable intr*/
- iowrite32((status << 8), mid->dma_base + MASK_TFR);
- pr_debug("MDMA: Calling tasklet %x\n", status);
+ iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_TFR);
+ iowrite32((tfr_status << INT_MASK_WE), mid->dma_base + MASK_BLOCK);
+ pr_debug("MDMA: Calling tasklet %x\n", tfr_status);
call_tasklet = 1;
}
- status = ioread32(mid->dma_base + RAW_ERR);
- status &= mid->intr_mask;
- if (status) {
- iowrite32(MASK_INTR_REG(status), mid->dma_base + MASK_ERR);
+ err_status &= mid->intr_mask;
+ if (err_status) {
+ iowrite32(MASK_INTR_REG(err_status), mid->dma_base + MASK_ERR);
call_tasklet = 1;
}
if (call_tasklet)
@@ -856,7 +1067,6 @@
{
struct middma_device *dma = pci_get_drvdata(pdev);
int err, i;
- unsigned int irq_level;
/* DMA coherent memory pool for DMA descriptor allocations */
dma->dma_pool = pci_pool_create("intel_mid_dma_desc_pool", pdev,
@@ -884,6 +1094,7 @@
pr_debug("MDMA:Adding %d channel for this controller\n", dma->max_chan);
/*init CH structures*/
dma->intr_mask = 0;
+ dma->state = RUNNING;
for (i = 0; i < dma->max_chan; i++) {
struct intel_mid_dma_chan *midch = &dma->ch[i];
@@ -943,7 +1154,6 @@
/*register irq */
if (dma->pimr_mask) {
- irq_level = IRQF_SHARED;
pr_debug("MDMA:Requesting irq shared for DMAC1\n");
err = request_irq(pdev->irq, intel_mid_dma_interrupt1,
IRQF_SHARED, "INTEL_MID_DMAC1", dma);
@@ -951,10 +1161,9 @@
goto err_irq;
} else {
dma->intr_mask = 0x03;
- irq_level = 0;
pr_debug("MDMA:Requesting irq for DMAC2\n");
err = request_irq(pdev->irq, intel_mid_dma_interrupt2,
- 0, "INTEL_MID_DMAC2", dma);
+ IRQF_SHARED, "INTEL_MID_DMAC2", dma);
if (0 != err)
goto err_irq;
}
@@ -1070,6 +1279,9 @@
if (err)
goto err_dma;
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_allow(&pdev->dev);
return 0;
err_dma:
@@ -1104,6 +1316,85 @@
pci_disable_device(pdev);
}
+/* Power Management */
+/*
+* dma_suspend - PCI suspend function
+*
+* @pci: PCI device structure
+* @state: PM message
+*
+* This function is called by OS when a power event occurs
+*/
+int dma_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ int i;
+ struct middma_device *device = pci_get_drvdata(pci);
+ pr_debug("MDMA: dma_suspend called\n");
+
+ for (i = 0; i < device->max_chan; i++) {
+ if (device->ch[i].in_use)
+ return -EAGAIN;
+ }
+ device->state = SUSPENDED;
+ pci_set_drvdata(pci, device);
+ pci_save_state(pci);
+ pci_disable_device(pci);
+ pci_set_power_state(pci, PCI_D3hot);
+ return 0;
+}
+
+/**
+* dma_resume - PCI resume function
+*
+* @pci: PCI device structure
+*
+* This function is called by OS when a power event occurs
+*/
+int dma_resume(struct pci_dev *pci)
+{
+ int ret;
+ struct middma_device *device = pci_get_drvdata(pci);
+
+ pr_debug("MDMA: dma_resume called\n");
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+ ret = pci_enable_device(pci);
+ if (ret) {
+ pr_err("MDMA: device cant be enabled for %x\n", pci->device);
+ return ret;
+ }
+ device->state = RUNNING;
+ iowrite32(REG_BIT0, device->dma_base + DMA_CFG);
+ pci_set_drvdata(pci, device);
+ return 0;
+}
+
+static int dma_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ return dma_suspend(pci_dev, PMSG_SUSPEND);
+}
+
+static int dma_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ return dma_resume(pci_dev);
+}
+
+static int dma_runtime_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct middma_device *device = pci_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < device->max_chan; i++) {
+ if (device->ch[i].in_use)
+ return -EAGAIN;
+ }
+
+ return pm_schedule_suspend(dev, 0);
+}
+
/******************************************************************************
* PCI stuff
*/
@@ -1116,11 +1407,24 @@
};
MODULE_DEVICE_TABLE(pci, intel_mid_dma_ids);
+static const struct dev_pm_ops intel_mid_dma_pm = {
+ .runtime_suspend = dma_runtime_suspend,
+ .runtime_resume = dma_runtime_resume,
+ .runtime_idle = dma_runtime_idle,
+};
+
static struct pci_driver intel_mid_dma_pci = {
.name = "Intel MID DMA",
.id_table = intel_mid_dma_ids,
.probe = intel_mid_dma_probe,
.remove = __devexit_p(intel_mid_dma_remove),
+#ifdef CONFIG_PM
+ .suspend = dma_suspend,
+ .resume = dma_resume,
+ .driver = {
+ .pm = &intel_mid_dma_pm,
+ },
+#endif
};
static int __init intel_mid_dma_init(void)
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
index d81aa65..709fecb 100644
--- a/drivers/dma/intel_mid_dma_regs.h
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -29,11 +29,12 @@
#include <linux/dmapool.h>
#include <linux/pci_ids.h>
-#define INTEL_MID_DMA_DRIVER_VERSION "1.0.5"
+#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
#define REG_BIT0 0x00000001
#define REG_BIT8 0x00000100
-
+#define INT_MASK_WE 0x8
+#define CLEAR_DONE 0xFFFFEFFF
#define UNMASK_INTR_REG(chan_num) \
((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
@@ -41,6 +42,9 @@
#define ENABLE_CHANNEL(chan_num) \
((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
+#define DISABLE_CHANNEL(chan_num) \
+ (REG_BIT8 << chan_num)
+
#define DESCS_PER_CHANNEL 16
/*DMA Registers*/
/*registers associated with channel programming*/
@@ -50,6 +54,7 @@
/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
#define SAR 0x00 /* Source Address Register*/
#define DAR 0x08 /* Destination Address Register*/
+#define LLP 0x10 /* Linked List Pointer Register*/
#define CTL_LOW 0x18 /* Control Register*/
#define CTL_HIGH 0x1C /* Control Register*/
#define CFG_LOW 0x40 /* Configuration Register Low*/
@@ -112,8 +117,8 @@
union intel_mid_dma_ctl_hi {
struct {
u32 block_ts:12; /*block transfer size*/
- /*configured by DMAC*/
- u32 reser:20;
+ u32 done:1; /*Done - updated by DMAC*/
+ u32 reser:19; /*configured by DMAC*/
} ctlx;
u32 ctl_hi;
@@ -152,6 +157,7 @@
u32 cfg_hi;
};
+
/**
* struct intel_mid_dma_chan - internal mid representation of a DMA channel
* @chan: dma_chan strcture represetation for mid chan
@@ -166,7 +172,10 @@
* @slave: dma slave struture
* @descs_allocated: total number of decsiptors allocated
* @dma: dma device struture pointer
+ * @busy: bool representing if ch is busy (active txn) or not
* @in_use: bool representing if ch is in use or not
+ * @raw_tfr: raw trf interrupt recieved
+ * @raw_block: raw block interrupt recieved
*/
struct intel_mid_dma_chan {
struct dma_chan chan;
@@ -178,10 +187,13 @@
struct list_head active_list;
struct list_head queue;
struct list_head free_list;
- struct intel_mid_dma_slave *slave;
unsigned int descs_allocated;
struct middma_device *dma;
+ bool busy;
bool in_use;
+ u32 raw_tfr;
+ u32 raw_block;
+ struct intel_mid_dma_slave *mid_slave;
};
static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
@@ -190,6 +202,10 @@
return container_of(chan, struct intel_mid_dma_chan, chan);
}
+enum intel_mid_dma_state {
+ RUNNING = 0,
+ SUSPENDED,
+};
/**
* struct middma_device - internal representation of a DMA device
* @pdev: PCI device
@@ -205,6 +221,7 @@
* @max_chan: max number of chs supported (from drv_data)
* @block_size: Block size of DMA transfer supported (from drv_data)
* @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
+ * @state: dma PM device state
*/
struct middma_device {
struct pci_dev *pdev;
@@ -220,6 +237,7 @@
int max_chan;
int block_size;
unsigned int pimr_mask;
+ enum intel_mid_dma_state state;
};
static inline struct middma_device *to_middma_device(struct dma_device *common)
@@ -238,14 +256,27 @@
u32 cfg_lo;
u32 ctl_lo;
u32 ctl_hi;
+ struct pci_pool *lli_pool;
+ struct intel_mid_dma_lli *lli;
+ dma_addr_t lli_phys;
+ unsigned int lli_length;
+ unsigned int current_lli;
dma_addr_t next;
enum dma_data_direction dirn;
enum dma_status status;
- enum intel_mid_dma_width width; /*width of DMA txn*/
+ enum dma_slave_buswidth width; /*width of DMA txn*/
enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
};
+struct intel_mid_dma_lli {
+ dma_addr_t sar;
+ dma_addr_t dar;
+ dma_addr_t llp;
+ u32 ctl_lo;
+ u32 ctl_hi;
+} __attribute__ ((packed));
+
static inline int test_ch_en(void __iomem *dma, u32 ch_no)
{
u32 en_reg = ioread32(dma + DMA_CHAN_EN);
@@ -257,4 +288,14 @@
{
return container_of(txd, struct intel_mid_dma_desc, txd);
}
+
+static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
+ (struct dma_slave_config *slave)
+{
+ return container_of(slave, struct intel_mid_dma_slave, dma_slave);
+}
+
+
+int dma_resume(struct pci_dev *pci);
+
#endif /*__INTEL_MID_DMAC_REGS_H__*/
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 86c5ae9..411d5bf 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -162,7 +162,7 @@
static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
{
- u32 val = (1 << (1 + (chan->idx * 16)));
+ u32 val = ~(1 << (chan->idx * 16));
dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
__raw_writel(val, XOR_INTR_CAUSE(chan));
}
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index fb64cf3..eb6b54d 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -580,7 +580,6 @@
sh_chan = to_sh_chan(chan);
param = chan->private;
- slave_addr = param->config->addr;
/* Someone calling slave DMA on a public channel? */
if (!param || !sg_len) {
@@ -589,6 +588,8 @@
return NULL;
}
+ slave_addr = param->config->addr;
+
/*
* if (param != NULL), this is a successfully requested slave channel,
* therefore param->config != NULL too.
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 17e2600..3f76cd9 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1,11 +1,8 @@
/*
- * driver/dma/ste_dma40.c
- *
- * Copyright (C) ST-Ericsson 2007-2010
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
*/
#include <linux/kernel.h>
@@ -14,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/err.h>
#include <plat/ste_dma40.h>
@@ -32,6 +30,11 @@
/* Hardware requirement on LCLA alignment */
#define LCLA_ALIGNMENT 0x40000
+
+/* Max number of links per event group */
+#define D40_LCLA_LINK_PER_EVENT_GRP 128
+#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
+
/* Attempts before giving up to trying to get pages that are aligned */
#define MAX_LCLA_ALLOC_ATTEMPTS 256
@@ -41,7 +44,7 @@
#define D40_ALLOC_LOG_FREE 0
/* Hardware designer of the block */
-#define D40_PERIPHID2_DESIGNER 0x8
+#define D40_HW_DESIGNER 0x8
/**
* enum 40_command - The different commands and/or statuses.
@@ -84,18 +87,17 @@
* @lli_log: Same as above but for logical channels.
* @lli_pool: The pool with two entries pre-allocated.
* @lli_len: Number of llis of current descriptor.
- * @lli_count: Number of transfered llis.
- * @lli_tx_len: Max number of LLIs per transfer, there can be
- * many transfer for one descriptor.
+ * @lli_current: Number of transfered llis.
+ * @lcla_alloc: Number of LCLA entries allocated.
* @txd: DMA engine struct. Used for among other things for communication
* during a transfer.
* @node: List entry.
- * @dir: The transfer direction of this job.
* @is_in_client_list: true if the client owns this descriptor.
+ * @is_hw_linked: true if this job will automatically be continued for
+ * the previous one.
*
* This descriptor is used for both logical and physical transfers.
*/
-
struct d40_desc {
/* LLI physical */
struct d40_phy_lli_bidir lli_phy;
@@ -104,14 +106,14 @@
struct d40_lli_pool lli_pool;
int lli_len;
- int lli_count;
- u32 lli_tx_len;
+ int lli_current;
+ int lcla_alloc;
struct dma_async_tx_descriptor txd;
struct list_head node;
- enum dma_data_direction dir;
bool is_in_client_list;
+ bool is_hw_linked;
};
/**
@@ -123,17 +125,14 @@
* @pages: The number of pages needed for all physical channels.
* Only used later for clean-up on error
* @lock: Lock to protect the content in this struct.
- * @alloc_map: Bitmap mapping between physical channel and LCLA entries.
- * @num_blocks: The number of entries of alloc_map. Equals to the
- * number of physical channels.
+ * @alloc_map: big map over which LCLA entry is own by which job.
*/
struct d40_lcla_pool {
void *base;
void *base_unaligned;
int pages;
spinlock_t lock;
- u32 *alloc_map;
- int num_blocks;
+ struct d40_desc **alloc_map;
};
/**
@@ -146,9 +145,7 @@
* this physical channel. Can also be free or physically allocated.
* @allocated_dst: Same as for src but is dst.
* allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
- * event line number. Both allocated_src and allocated_dst can not be
- * allocated to a physical channel, since the interrupt handler has then
- * no way of figure out which one the interrupt belongs to.
+ * event line number.
*/
struct d40_phy_res {
spinlock_t lock;
@@ -206,7 +203,6 @@
u32 src_def_cfg;
u32 dst_def_cfg;
struct d40_def_lcsp log_def;
- struct d40_lcla_elem lcla;
struct d40_log_lli_full *lcpa;
/* Runtime reconfiguration */
dma_addr_t runtime_addr;
@@ -234,7 +230,6 @@
* @dma_both: dma_device channels that can do both memcpy and slave transfers.
* @dma_slave: dma_device channels that can do only do slave transfers.
* @dma_memcpy: dma_device channels that can do only do memcpy transfers.
- * @phy_chans: Room for all possible physical channels in system.
* @log_chans: Room for all possible logical channels in system.
* @lookup_log_chans: Used to map interrupt number to logical channel. Points
* to log_chans entries.
@@ -340,9 +335,6 @@
align);
d40d->lli_phy.dst = PTR_ALIGN(d40d->lli_phy.src + lli_len,
align);
-
- d40d->lli_phy.src_addr = virt_to_phys(d40d->lli_phy.src);
- d40d->lli_phy.dst_addr = virt_to_phys(d40d->lli_phy.dst);
}
return 0;
@@ -357,22 +349,67 @@
d40d->lli_log.dst = NULL;
d40d->lli_phy.src = NULL;
d40d->lli_phy.dst = NULL;
- d40d->lli_phy.src_addr = 0;
- d40d->lli_phy.dst_addr = 0;
}
-static dma_cookie_t d40_assign_cookie(struct d40_chan *d40c,
- struct d40_desc *desc)
+static int d40_lcla_alloc_one(struct d40_chan *d40c,
+ struct d40_desc *d40d)
{
- dma_cookie_t cookie = d40c->chan.cookie;
+ unsigned long flags;
+ int i;
+ int ret = -EINVAL;
+ int p;
- if (++cookie < 0)
- cookie = 1;
+ spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
- d40c->chan.cookie = cookie;
- desc->txd.cookie = cookie;
+ p = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP;
- return cookie;
+ /*
+ * Allocate both src and dst at the same time, therefore the half
+ * start on 1 since 0 can't be used since zero is used as end marker.
+ */
+ for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
+ if (!d40c->base->lcla_pool.alloc_map[p + i]) {
+ d40c->base->lcla_pool.alloc_map[p + i] = d40d;
+ d40d->lcla_alloc++;
+ ret = i;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
+
+ return ret;
+}
+
+static int d40_lcla_free_all(struct d40_chan *d40c,
+ struct d40_desc *d40d)
+{
+ unsigned long flags;
+ int i;
+ int ret = -EINVAL;
+
+ if (d40c->log_num == D40_PHY_CHAN)
+ return 0;
+
+ spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
+
+ for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
+ if (d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num *
+ D40_LCLA_LINK_PER_EVENT_GRP + i] == d40d) {
+ d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num *
+ D40_LCLA_LINK_PER_EVENT_GRP + i] = NULL;
+ d40d->lcla_alloc--;
+ if (d40d->lcla_alloc == 0) {
+ ret = 0;
+ break;
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
+
+ return ret;
+
}
static void d40_desc_remove(struct d40_desc *d40d)
@@ -382,28 +419,35 @@
static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
{
- struct d40_desc *d;
- struct d40_desc *_d;
+ struct d40_desc *desc = NULL;
if (!list_empty(&d40c->client)) {
+ struct d40_desc *d;
+ struct d40_desc *_d;
+
list_for_each_entry_safe(d, _d, &d40c->client, node)
if (async_tx_test_ack(&d->txd)) {
d40_pool_lli_free(d);
d40_desc_remove(d);
+ desc = d;
+ memset(desc, 0, sizeof(*desc));
break;
}
- } else {
- d = kmem_cache_alloc(d40c->base->desc_slab, GFP_NOWAIT);
- if (d != NULL) {
- memset(d, 0, sizeof(struct d40_desc));
- INIT_LIST_HEAD(&d->node);
- }
}
- return d;
+
+ if (!desc)
+ desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
+
+ if (desc)
+ INIT_LIST_HEAD(&desc->node);
+
+ return desc;
}
static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
{
+
+ d40_lcla_free_all(d40c, d40d);
kmem_cache_free(d40c->base->desc_slab, d40d);
}
@@ -412,6 +456,59 @@
list_add_tail(&desc->node, &d40c->active);
}
+static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
+{
+ int curr_lcla = -EINVAL, next_lcla;
+
+ if (d40c->log_num == D40_PHY_CHAN) {
+ d40_phy_lli_write(d40c->base->virtbase,
+ d40c->phy_chan->num,
+ d40d->lli_phy.dst,
+ d40d->lli_phy.src);
+ d40d->lli_current = d40d->lli_len;
+ } else {
+
+ if ((d40d->lli_len - d40d->lli_current) > 1)
+ curr_lcla = d40_lcla_alloc_one(d40c, d40d);
+
+ d40_log_lli_lcpa_write(d40c->lcpa,
+ &d40d->lli_log.dst[d40d->lli_current],
+ &d40d->lli_log.src[d40d->lli_current],
+ curr_lcla);
+
+ d40d->lli_current++;
+ for (; d40d->lli_current < d40d->lli_len; d40d->lli_current++) {
+ struct d40_log_lli *lcla;
+
+ if (d40d->lli_current + 1 < d40d->lli_len)
+ next_lcla = d40_lcla_alloc_one(d40c, d40d);
+ else
+ next_lcla = -EINVAL;
+
+ lcla = d40c->base->lcla_pool.base +
+ d40c->phy_chan->num * 1024 +
+ 8 * curr_lcla * 2;
+
+ d40_log_lli_lcla_write(lcla,
+ &d40d->lli_log.dst[d40d->lli_current],
+ &d40d->lli_log.src[d40d->lli_current],
+ next_lcla);
+
+ (void) dma_map_single(d40c->base->dev, lcla,
+ 2 * sizeof(struct d40_log_lli),
+ DMA_TO_DEVICE);
+
+ curr_lcla = next_lcla;
+
+ if (curr_lcla == -EINVAL) {
+ d40d->lli_current++;
+ break;
+ }
+
+ }
+ }
+}
+
static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
{
struct d40_desc *d;
@@ -443,68 +540,26 @@
return d;
}
-/* Support functions for logical channels */
-
-static int d40_lcla_id_get(struct d40_chan *d40c)
+static struct d40_desc *d40_last_queued(struct d40_chan *d40c)
{
- int src_id = 0;
- int dst_id = 0;
- struct d40_log_lli *lcla_lidx_base =
- d40c->base->lcla_pool.base + d40c->phy_chan->num * 1024;
- int i;
- int lli_per_log = d40c->base->plat_data->llis_per_log;
- unsigned long flags;
+ struct d40_desc *d;
- if (d40c->lcla.src_id >= 0 && d40c->lcla.dst_id >= 0)
- return 0;
-
- if (d40c->base->lcla_pool.num_blocks > 32)
- return -EINVAL;
-
- spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
-
- for (i = 0; i < d40c->base->lcla_pool.num_blocks; i++) {
- if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &
- (0x1 << i))) {
- d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |=
- (0x1 << i);
+ if (list_empty(&d40c->queue))
+ return NULL;
+ list_for_each_entry(d, &d40c->queue, node)
+ if (list_is_last(&d->node, &d40c->queue))
break;
- }
- }
- src_id = i;
- if (src_id >= d40c->base->lcla_pool.num_blocks)
- goto err;
-
- for (; i < d40c->base->lcla_pool.num_blocks; i++) {
- if (!(d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &
- (0x1 << i))) {
- d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] |=
- (0x1 << i);
- break;
- }
- }
-
- dst_id = i;
- if (dst_id == src_id)
- goto err;
-
- d40c->lcla.src_id = src_id;
- d40c->lcla.dst_id = dst_id;
- d40c->lcla.dst = lcla_lidx_base + dst_id * lli_per_log + 1;
- d40c->lcla.src = lcla_lidx_base + src_id * lli_per_log + 1;
-
- spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
- return 0;
-err:
- spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
- return -EINVAL;
+ return d;
}
+/* Support functions for logical channels */
+
static int d40_channel_execute_command(struct d40_chan *d40c,
enum d40_command command)
{
- int status, i;
+ u32 status;
+ int i;
void __iomem *active_reg;
int ret = 0;
unsigned long flags;
@@ -567,35 +622,19 @@
static void d40_term_all(struct d40_chan *d40c)
{
struct d40_desc *d40d;
- unsigned long flags;
/* Release active descriptors */
while ((d40d = d40_first_active_get(d40c))) {
d40_desc_remove(d40d);
-
- /* Return desc to free-list */
d40_desc_free(d40c, d40d);
}
/* Release queued descriptors waiting for transfer */
while ((d40d = d40_first_queued(d40c))) {
d40_desc_remove(d40d);
-
- /* Return desc to free-list */
d40_desc_free(d40c, d40d);
}
- spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
-
- d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &=
- (~(0x1 << d40c->lcla.dst_id));
- d40c->base->lcla_pool.alloc_map[d40c->phy_chan->num] &=
- (~(0x1 << d40c->lcla.src_id));
-
- d40c->lcla.src_id = -1;
- d40c->lcla.dst_id = -1;
-
- spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
d40c->pending_tx = 0;
d40c->busy = false;
@@ -640,45 +679,22 @@
static u32 d40_chan_has_events(struct d40_chan *d40c)
{
- u32 val = 0;
+ u32 val;
- /* If SSLNK or SDLNK is zero all events are disabled */
- if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) ||
- (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH))
- val = readl(d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA +
- D40_CHAN_REG_SSLNK);
+ val = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSLNK);
- if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM)
- val = readl(d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA +
- D40_CHAN_REG_SDLNK);
+ val |= readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDLNK);
return val;
}
-static void d40_config_enable_lidx(struct d40_chan *d40c)
-{
- /* Set LIDX for lcla */
- writel((d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) &
- D40_SREG_ELEM_LOG_LIDX_MASK,
- d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA + D40_CHAN_REG_SDELT);
-
- writel((d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) &
- D40_SREG_ELEM_LOG_LIDX_MASK,
- d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA + D40_CHAN_REG_SSELT);
-}
-
-static int d40_config_write(struct d40_chan *d40c)
+static void d40_config_write(struct d40_chan *d40c)
{
u32 addr_base;
u32 var;
- int res;
-
- res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
- if (res)
- return res;
/* Odd addresses are even addresses + 4 */
addr_base = (d40c->phy_chan->num % 2) * 4;
@@ -704,41 +720,181 @@
d40c->phy_chan->num * D40_DREG_PCDELTA +
D40_CHAN_REG_SDCFG);
- d40_config_enable_lidx(d40c);
+ /* Set LIDX for lcla */
+ writel((d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) &
+ D40_SREG_ELEM_LOG_LIDX_MASK,
+ d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDELT);
+
+ writel((d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) &
+ D40_SREG_ELEM_LOG_LIDX_MASK,
+ d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSELT);
+
}
+}
+
+static u32 d40_residue(struct d40_chan *d40c)
+{
+ u32 num_elt;
+
+ if (d40c->log_num != D40_PHY_CHAN)
+ num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
+ >> D40_MEM_LCSP2_ECNT_POS;
+ else
+ num_elt = (readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDELT) &
+ D40_SREG_ELEM_PHY_ECNT_MASK) >>
+ D40_SREG_ELEM_PHY_ECNT_POS;
+ return num_elt * (1 << d40c->dma_cfg.dst_info.data_width);
+}
+
+static bool d40_tx_is_linked(struct d40_chan *d40c)
+{
+ bool is_link;
+
+ if (d40c->log_num != D40_PHY_CHAN)
+ is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
+ else
+ is_link = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDLNK) &
+ D40_SREG_LNK_PHYS_LNK_MASK;
+ return is_link;
+}
+
+static int d40_pause(struct dma_chan *chan)
+{
+ struct d40_chan *d40c =
+ container_of(chan, struct d40_chan, chan);
+ int res = 0;
+ unsigned long flags;
+
+ if (!d40c->busy)
+ return 0;
+
+ spin_lock_irqsave(&d40c->lock, flags);
+
+ res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
+ if (res == 0) {
+ if (d40c->log_num != D40_PHY_CHAN) {
+ d40_config_set_event(d40c, false);
+ /* Resume the other logical channels if any */
+ if (d40_chan_has_events(d40c))
+ res = d40_channel_execute_command(d40c,
+ D40_DMA_RUN);
+ }
+ }
+
+ spin_unlock_irqrestore(&d40c->lock, flags);
return res;
}
-static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
+static int d40_resume(struct dma_chan *chan)
{
- if (d40d->lli_phy.dst && d40d->lli_phy.src) {
- d40_phy_lli_write(d40c->base->virtbase,
- d40c->phy_chan->num,
- d40d->lli_phy.dst,
- d40d->lli_phy.src);
- } else if (d40d->lli_log.dst && d40d->lli_log.src) {
- struct d40_log_lli *src = d40d->lli_log.src;
- struct d40_log_lli *dst = d40d->lli_log.dst;
- int s;
+ struct d40_chan *d40c =
+ container_of(chan, struct d40_chan, chan);
+ int res = 0;
+ unsigned long flags;
- src += d40d->lli_count;
- dst += d40d->lli_count;
- s = d40_log_lli_write(d40c->lcpa,
- d40c->lcla.src, d40c->lcla.dst,
- dst, src,
- d40c->base->plat_data->llis_per_log);
+ if (!d40c->busy)
+ return 0;
- /* If s equals to zero, the job is not linked */
- if (s > 0) {
- (void) dma_map_single(d40c->base->dev, d40c->lcla.src,
- s * sizeof(struct d40_log_lli),
- DMA_TO_DEVICE);
- (void) dma_map_single(d40c->base->dev, d40c->lcla.dst,
- s * sizeof(struct d40_log_lli),
- DMA_TO_DEVICE);
+ spin_lock_irqsave(&d40c->lock, flags);
+
+ if (d40c->base->rev == 0)
+ if (d40c->log_num != D40_PHY_CHAN) {
+ res = d40_channel_execute_command(d40c,
+ D40_DMA_SUSPEND_REQ);
+ goto no_suspend;
}
+
+ /* If bytes left to transfer or linked tx resume job */
+ if (d40_residue(d40c) || d40_tx_is_linked(d40c)) {
+
+ if (d40c->log_num != D40_PHY_CHAN)
+ d40_config_set_event(d40c, true);
+
+ res = d40_channel_execute_command(d40c, D40_DMA_RUN);
}
- d40d->lli_count += d40d->lli_tx_len;
+
+no_suspend:
+ spin_unlock_irqrestore(&d40c->lock, flags);
+ return res;
+}
+
+static void d40_tx_submit_log(struct d40_chan *d40c, struct d40_desc *d40d)
+{
+ /* TODO: Write */
+}
+
+static void d40_tx_submit_phy(struct d40_chan *d40c, struct d40_desc *d40d)
+{
+ struct d40_desc *d40d_prev = NULL;
+ int i;
+ u32 val;
+
+ if (!list_empty(&d40c->queue))
+ d40d_prev = d40_last_queued(d40c);
+ else if (!list_empty(&d40c->active))
+ d40d_prev = d40_first_active_get(d40c);
+
+ if (!d40d_prev)
+ return;
+
+ /* Here we try to join this job with previous jobs */
+ val = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSLNK);
+
+ /* Figure out which link we're currently transmitting */
+ for (i = 0; i < d40d_prev->lli_len; i++)
+ if (val == d40d_prev->lli_phy.src[i].reg_lnk)
+ break;
+
+ val = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSELT) >> D40_SREG_ELEM_LOG_ECNT_POS;
+
+ if (i == (d40d_prev->lli_len - 1) && val > 0) {
+ /* Change the current one */
+ writel(virt_to_phys(d40d->lli_phy.src),
+ d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSLNK);
+ writel(virt_to_phys(d40d->lli_phy.dst),
+ d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDLNK);
+
+ d40d->is_hw_linked = true;
+
+ } else if (i < d40d_prev->lli_len) {
+ (void) dma_unmap_single(d40c->base->dev,
+ virt_to_phys(d40d_prev->lli_phy.src),
+ d40d_prev->lli_pool.size,
+ DMA_TO_DEVICE);
+
+ /* Keep the settings */
+ val = d40d_prev->lli_phy.src[d40d_prev->lli_len - 1].reg_lnk &
+ ~D40_SREG_LNK_PHYS_LNK_MASK;
+ d40d_prev->lli_phy.src[d40d_prev->lli_len - 1].reg_lnk =
+ val | virt_to_phys(d40d->lli_phy.src);
+
+ val = d40d_prev->lli_phy.dst[d40d_prev->lli_len - 1].reg_lnk &
+ ~D40_SREG_LNK_PHYS_LNK_MASK;
+ d40d_prev->lli_phy.dst[d40d_prev->lli_len - 1].reg_lnk =
+ val | virt_to_phys(d40d->lli_phy.dst);
+
+ (void) dma_map_single(d40c->base->dev,
+ d40d_prev->lli_phy.src,
+ d40d_prev->lli_pool.size,
+ DMA_TO_DEVICE);
+ d40d->is_hw_linked = true;
+ }
}
static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
@@ -749,14 +905,28 @@
struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
unsigned long flags;
+ (void) d40_pause(&d40c->chan);
+
spin_lock_irqsave(&d40c->lock, flags);
- tx->cookie = d40_assign_cookie(d40c, d40d);
+ d40c->chan.cookie++;
+
+ if (d40c->chan.cookie < 0)
+ d40c->chan.cookie = 1;
+
+ d40d->txd.cookie = d40c->chan.cookie;
+
+ if (d40c->log_num == D40_PHY_CHAN)
+ d40_tx_submit_phy(d40c, d40d);
+ else
+ d40_tx_submit_log(d40c, d40d);
d40_desc_queue(d40c, d40d);
spin_unlock_irqrestore(&d40c->lock, flags);
+ (void) d40_resume(&d40c->chan);
+
return tx->cookie;
}
@@ -796,14 +966,21 @@
/* Add to active queue */
d40_desc_submit(d40c, d40d);
- /* Initiate DMA job */
- d40_desc_load(d40c, d40d);
+ /*
+ * If this job is already linked in hw,
+ * do not submit it.
+ */
- /* Start dma job */
- err = d40_start(d40c);
+ if (!d40d->is_hw_linked) {
+ /* Initiate DMA job */
+ d40_desc_load(d40c, d40d);
- if (err)
- return NULL;
+ /* Start dma job */
+ err = d40_start(d40c);
+
+ if (err)
+ return NULL;
+ }
}
return d40d;
@@ -814,17 +991,15 @@
{
struct d40_desc *d40d;
- if (!d40c->phy_chan)
- return;
-
/* Get first active entry from list */
d40d = d40_first_active_get(d40c);
if (d40d == NULL)
return;
- if (d40d->lli_count < d40d->lli_len) {
+ d40_lcla_free_all(d40c, d40d);
+ if (d40d->lli_current < d40d->lli_len) {
d40_desc_load(d40c, d40d);
/* Start dma job */
(void) d40_start(d40c);
@@ -842,7 +1017,7 @@
static void dma_tasklet(unsigned long data)
{
struct d40_chan *d40c = (struct d40_chan *) data;
- struct d40_desc *d40d_fin;
+ struct d40_desc *d40d;
unsigned long flags;
dma_async_tx_callback callback;
void *callback_param;
@@ -850,12 +1025,12 @@
spin_lock_irqsave(&d40c->lock, flags);
/* Get first active entry from list */
- d40d_fin = d40_first_active_get(d40c);
+ d40d = d40_first_active_get(d40c);
- if (d40d_fin == NULL)
+ if (d40d == NULL)
goto err;
- d40c->completed = d40d_fin->txd.cookie;
+ d40c->completed = d40d->txd.cookie;
/*
* If terminating a channel pending_tx is set to zero.
@@ -867,19 +1042,19 @@
}
/* Callback to client */
- callback = d40d_fin->txd.callback;
- callback_param = d40d_fin->txd.callback_param;
+ callback = d40d->txd.callback;
+ callback_param = d40d->txd.callback_param;
- if (async_tx_test_ack(&d40d_fin->txd)) {
- d40_pool_lli_free(d40d_fin);
- d40_desc_remove(d40d_fin);
- /* Return desc to free-list */
- d40_desc_free(d40c, d40d_fin);
+ if (async_tx_test_ack(&d40d->txd)) {
+ d40_pool_lli_free(d40d);
+ d40_desc_remove(d40d);
+ d40_desc_free(d40c, d40d);
} else {
- if (!d40d_fin->is_in_client_list) {
- d40_desc_remove(d40d_fin);
- list_add_tail(&d40d_fin->node, &d40c->client);
- d40d_fin->is_in_client_list = true;
+ if (!d40d->is_in_client_list) {
+ d40_desc_remove(d40d);
+ d40_lcla_free_all(d40c, d40d);
+ list_add_tail(&d40d->node, &d40c->client);
+ d40d->is_in_client_list = true;
}
}
@@ -890,7 +1065,7 @@
spin_unlock_irqrestore(&d40c->lock, flags);
- if (callback)
+ if (callback && (d40d->txd.flags & DMA_PREP_INTERRUPT))
callback(callback_param);
return;
@@ -919,7 +1094,6 @@
int i;
u32 regs[ARRAY_SIZE(il)];
- u32 tmp;
u32 idx;
u32 row;
long chan = -1;
@@ -946,9 +1120,7 @@
idx = chan & (BITS_PER_LONG - 1);
/* ACK interrupt */
- tmp = readl(base->virtbase + il[row].clr);
- tmp |= 1 << idx;
- writel(tmp, base->virtbase + il[row].clr);
+ writel(1 << idx, base->virtbase + il[row].clr);
if (il[row].offset == D40_PHY_CHAN)
d40c = base->lookup_phy_chans[idx];
@@ -971,7 +1143,6 @@
return IRQ_HANDLED;
}
-
static int d40_validate_conf(struct d40_chan *d40c,
struct stedma40_chan_cfg *conf)
{
@@ -981,14 +1152,39 @@
bool is_log = (conf->channel_type & STEDMA40_CHANNEL_IN_OPER_MODE)
== STEDMA40_CHANNEL_IN_LOG_MODE;
- if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH &&
+ if (!conf->dir) {
+ dev_err(&d40c->chan.dev->device, "[%s] Invalid direction.\n",
+ __func__);
+ res = -EINVAL;
+ }
+
+ if (conf->dst_dev_type != STEDMA40_DEV_DST_MEMORY &&
+ d40c->base->plat_data->dev_tx[conf->dst_dev_type] == 0 &&
+ d40c->runtime_addr == 0) {
+
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Invalid TX channel address (%d)\n",
+ __func__, conf->dst_dev_type);
+ res = -EINVAL;
+ }
+
+ if (conf->src_dev_type != STEDMA40_DEV_SRC_MEMORY &&
+ d40c->base->plat_data->dev_rx[conf->src_dev_type] == 0 &&
+ d40c->runtime_addr == 0) {
+ dev_err(&d40c->chan.dev->device,
+ "[%s] Invalid RX channel address (%d)\n",
+ __func__, conf->src_dev_type);
+ res = -EINVAL;
+ }
+
+ if (conf->dir == STEDMA40_MEM_TO_PERIPH &&
dst_event_group == STEDMA40_DEV_DST_MEMORY) {
dev_err(&d40c->chan.dev->device, "[%s] Invalid dst\n",
__func__);
res = -EINVAL;
}
- if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM &&
+ if (conf->dir == STEDMA40_PERIPH_TO_MEM &&
src_event_group == STEDMA40_DEV_SRC_MEMORY) {
dev_err(&d40c->chan.dev->device, "[%s] Invalid src\n",
__func__);
@@ -1082,7 +1278,6 @@
spin_lock_irqsave(&phy->lock, flags);
if (!log_event_line) {
- /* Physical interrupts are masked per physical full channel */
phy->allocated_dst = D40_ALLOC_FREE;
phy->allocated_src = D40_ALLOC_FREE;
is_free = true;
@@ -1251,7 +1446,6 @@
list_for_each_entry_safe(d, _d, &d40c->client, node) {
d40_pool_lli_free(d);
d40_desc_remove(d);
- /* Return desc to free-list */
d40_desc_free(d40c, d);
}
@@ -1331,30 +1525,6 @@
return 0;
}
-static int d40_pause(struct dma_chan *chan)
-{
- struct d40_chan *d40c =
- container_of(chan, struct d40_chan, chan);
- int res;
- unsigned long flags;
-
- spin_lock_irqsave(&d40c->lock, flags);
-
- res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
- if (res == 0) {
- if (d40c->log_num != D40_PHY_CHAN) {
- d40_config_set_event(d40c, false);
- /* Resume the other logical channels if any */
- if (d40_chan_has_events(d40c))
- res = d40_channel_execute_command(d40c,
- D40_DMA_RUN);
- }
- }
-
- spin_unlock_irqrestore(&d40c->lock, flags);
- return res;
-}
-
static bool d40_is_paused(struct d40_chan *d40c)
{
bool is_paused = false;
@@ -1381,16 +1551,22 @@
}
if (d40c->dma_cfg.dir == STEDMA40_MEM_TO_PERIPH ||
- d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM)
+ d40c->dma_cfg.dir == STEDMA40_MEM_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type);
- else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM)
+ status = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SDLNK);
+ } else if (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) {
event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type);
- else {
+ status = readl(d40c->base->virtbase + D40_DREG_PCBASE +
+ d40c->phy_chan->num * D40_DREG_PCDELTA +
+ D40_CHAN_REG_SSLNK);
+ } else {
dev_err(&d40c->chan.dev->device,
"[%s] Unknown direction\n", __func__);
goto _exit;
}
- status = d40_chan_has_events(d40c);
+
status = (status & D40_EVENTLINE_MASK(event)) >>
D40_EVENTLINE_POS(event);
@@ -1403,64 +1579,6 @@
}
-static bool d40_tx_is_linked(struct d40_chan *d40c)
-{
- bool is_link;
-
- if (d40c->log_num != D40_PHY_CHAN)
- is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
- else
- is_link = readl(d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA +
- D40_CHAN_REG_SDLNK) &
- D40_SREG_LNK_PHYS_LNK_MASK;
- return is_link;
-}
-
-static u32 d40_residue(struct d40_chan *d40c)
-{
- u32 num_elt;
-
- if (d40c->log_num != D40_PHY_CHAN)
- num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
- >> D40_MEM_LCSP2_ECNT_POS;
- else
- num_elt = (readl(d40c->base->virtbase + D40_DREG_PCBASE +
- d40c->phy_chan->num * D40_DREG_PCDELTA +
- D40_CHAN_REG_SDELT) &
- D40_SREG_ELEM_PHY_ECNT_MASK) >>
- D40_SREG_ELEM_PHY_ECNT_POS;
- return num_elt * (1 << d40c->dma_cfg.dst_info.data_width);
-}
-
-static int d40_resume(struct dma_chan *chan)
-{
- struct d40_chan *d40c =
- container_of(chan, struct d40_chan, chan);
- int res = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&d40c->lock, flags);
-
- if (d40c->base->rev == 0)
- if (d40c->log_num != D40_PHY_CHAN) {
- res = d40_channel_execute_command(d40c,
- D40_DMA_SUSPEND_REQ);
- goto no_suspend;
- }
-
- /* If bytes left to transfer or linked tx resume job */
- if (d40_residue(d40c) || d40_tx_is_linked(d40c)) {
- if (d40c->log_num != D40_PHY_CHAN)
- d40_config_set_event(d40c, true);
- res = d40_channel_execute_command(d40c, D40_DMA_RUN);
- }
-
-no_suspend:
- spin_unlock_irqrestore(&d40c->lock, flags);
- return res;
-}
-
static u32 stedma40_residue(struct dma_chan *chan)
{
struct d40_chan *d40c =
@@ -1475,51 +1593,6 @@
return bytes_left;
}
-/* Public DMA functions in addition to the DMA engine framework */
-
-int stedma40_set_psize(struct dma_chan *chan,
- int src_psize,
- int dst_psize)
-{
- struct d40_chan *d40c =
- container_of(chan, struct d40_chan, chan);
- unsigned long flags;
-
- spin_lock_irqsave(&d40c->lock, flags);
-
- if (d40c->log_num != D40_PHY_CHAN) {
- d40c->log_def.lcsp1 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK;
- d40c->log_def.lcsp3 &= ~D40_MEM_LCSP1_SCFG_PSIZE_MASK;
- d40c->log_def.lcsp1 |= src_psize <<
- D40_MEM_LCSP1_SCFG_PSIZE_POS;
- d40c->log_def.lcsp3 |= dst_psize <<
- D40_MEM_LCSP1_SCFG_PSIZE_POS;
- goto out;
- }
-
- if (src_psize == STEDMA40_PSIZE_PHY_1)
- d40c->src_def_cfg &= ~(1 << D40_SREG_CFG_PHY_PEN_POS);
- else {
- d40c->src_def_cfg |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- d40c->src_def_cfg &= ~(STEDMA40_PSIZE_PHY_16 <<
- D40_SREG_CFG_PSIZE_POS);
- d40c->src_def_cfg |= src_psize << D40_SREG_CFG_PSIZE_POS;
- }
-
- if (dst_psize == STEDMA40_PSIZE_PHY_1)
- d40c->dst_def_cfg &= ~(1 << D40_SREG_CFG_PHY_PEN_POS);
- else {
- d40c->dst_def_cfg |= 1 << D40_SREG_CFG_PHY_PEN_POS;
- d40c->dst_def_cfg &= ~(STEDMA40_PSIZE_PHY_16 <<
- D40_SREG_CFG_PSIZE_POS);
- d40c->dst_def_cfg |= dst_psize << D40_SREG_CFG_PSIZE_POS;
- }
-out:
- spin_unlock_irqrestore(&d40c->lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(stedma40_set_psize);
-
struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
struct scatterlist *sgl_dst,
struct scatterlist *sgl_src,
@@ -1545,21 +1618,10 @@
goto err;
d40d->lli_len = sgl_len;
- d40d->lli_tx_len = d40d->lli_len;
+ d40d->lli_current = 0;
d40d->txd.flags = dma_flags;
if (d40c->log_num != D40_PHY_CHAN) {
- if (d40d->lli_len > d40c->base->plat_data->llis_per_log)
- d40d->lli_tx_len = d40c->base->plat_data->llis_per_log;
-
- if (sgl_len > 1)
- /*
- * Check if there is space available in lcla. If not,
- * split list into 1-length and run only in lcpa
- * space.
- */
- if (d40_lcla_id_get(d40c) != 0)
- d40d->lli_tx_len = 1;
if (d40_pool_lli_alloc(d40d, sgl_len, true) < 0) {
dev_err(&d40c->chan.dev->device,
@@ -1567,27 +1629,17 @@
goto err;
}
- (void) d40_log_sg_to_lli(d40c->lcla.src_id,
- sgl_src,
+ (void) d40_log_sg_to_lli(sgl_src,
sgl_len,
d40d->lli_log.src,
d40c->log_def.lcsp1,
- d40c->dma_cfg.src_info.data_width,
- dma_flags & DMA_PREP_INTERRUPT,
- d40d->lli_tx_len,
- d40c->base->plat_data->llis_per_log);
+ d40c->dma_cfg.src_info.data_width);
- (void) d40_log_sg_to_lli(d40c->lcla.dst_id,
- sgl_dst,
+ (void) d40_log_sg_to_lli(sgl_dst,
sgl_len,
d40d->lli_log.dst,
d40c->log_def.lcsp3,
- d40c->dma_cfg.dst_info.data_width,
- dma_flags & DMA_PREP_INTERRUPT,
- d40d->lli_tx_len,
- d40c->base->plat_data->llis_per_log);
-
-
+ d40c->dma_cfg.dst_info.data_width);
} else {
if (d40_pool_lli_alloc(d40d, sgl_len, false) < 0) {
dev_err(&d40c->chan.dev->device,
@@ -1599,11 +1651,10 @@
sgl_len,
0,
d40d->lli_phy.src,
- d40d->lli_phy.src_addr,
+ virt_to_phys(d40d->lli_phy.src),
d40c->src_def_cfg,
d40c->dma_cfg.src_info.data_width,
- d40c->dma_cfg.src_info.psize,
- true);
+ d40c->dma_cfg.src_info.psize);
if (res < 0)
goto err;
@@ -1612,11 +1663,10 @@
sgl_len,
0,
d40d->lli_phy.dst,
- d40d->lli_phy.dst_addr,
+ virt_to_phys(d40d->lli_phy.dst),
d40c->dst_def_cfg,
d40c->dma_cfg.dst_info.data_width,
- d40c->dma_cfg.dst_info.psize,
- true);
+ d40c->dma_cfg.dst_info.psize);
if (res < 0)
goto err;
@@ -1633,6 +1683,8 @@
return &d40d->txd;
err:
+ if (d40d)
+ d40_desc_free(d40c, d40d);
spin_unlock_irqrestore(&d40c->lock, flags);
return NULL;
}
@@ -1673,6 +1725,7 @@
* use default configuration (memcpy)
*/
if (d40c->dma_cfg.channel_type == 0) {
+
err = d40_config_memcpy(d40c);
if (err) {
dev_err(&d40c->chan.dev->device,
@@ -1712,14 +1765,8 @@
* resource is free. In case of multiple logical channels
* on the same physical resource, only the first write is necessary.
*/
- if (is_free_phy) {
- err = d40_config_write(d40c);
- if (err) {
- dev_err(&d40c->chan.dev->device,
- "[%s] Failed to configure channel\n",
- __func__);
- }
- }
+ if (is_free_phy)
+ d40_config_write(d40c);
fail:
spin_unlock_irqrestore(&d40c->lock, flags);
return err;
@@ -1790,23 +1837,21 @@
goto err;
}
d40d->lli_len = 1;
- d40d->lli_tx_len = 1;
+ d40d->lli_current = 0;
d40_log_fill_lli(d40d->lli_log.src,
src,
size,
- 0,
d40c->log_def.lcsp1,
d40c->dma_cfg.src_info.data_width,
- false, true);
+ true);
d40_log_fill_lli(d40d->lli_log.dst,
dst,
size,
- 0,
d40c->log_def.lcsp3,
d40c->dma_cfg.dst_info.data_width,
- true, true);
+ true);
} else {
@@ -1851,12 +1896,25 @@
err_fill_lli:
dev_err(&d40c->chan.dev->device,
"[%s] Failed filling in PHY LLI\n", __func__);
- d40_pool_lli_free(d40d);
err:
+ if (d40d)
+ d40_desc_free(d40c, d40d);
spin_unlock_irqrestore(&d40c->lock, flags);
return NULL;
}
+static struct dma_async_tx_descriptor *
+d40_prep_sg(struct dma_chan *chan,
+ struct scatterlist *dst_sg, unsigned int dst_nents,
+ struct scatterlist *src_sg, unsigned int src_nents,
+ unsigned long dma_flags)
+{
+ if (dst_nents != src_nents)
+ return NULL;
+
+ return stedma40_memcpy_sg(chan, dst_sg, src_sg, dst_nents, dma_flags);
+}
+
static int d40_prep_slave_sg_log(struct d40_desc *d40d,
struct d40_chan *d40c,
struct scatterlist *sgl,
@@ -1874,19 +1932,7 @@
}
d40d->lli_len = sg_len;
- if (d40d->lli_len <= d40c->base->plat_data->llis_per_log)
- d40d->lli_tx_len = d40d->lli_len;
- else
- d40d->lli_tx_len = d40c->base->plat_data->llis_per_log;
-
- if (sg_len > 1)
- /*
- * Check if there is space available in lcla.
- * If not, split list into 1-length and run only
- * in lcpa space.
- */
- if (d40_lcla_id_get(d40c) != 0)
- d40d->lli_tx_len = 1;
+ d40d->lli_current = 0;
if (direction == DMA_FROM_DEVICE)
if (d40c->runtime_addr)
@@ -1902,16 +1948,13 @@
else
return -EINVAL;
- total_size = d40_log_sg_to_dev(&d40c->lcla,
- sgl, sg_len,
+ total_size = d40_log_sg_to_dev(sgl, sg_len,
&d40d->lli_log,
&d40c->log_def,
d40c->dma_cfg.src_info.data_width,
d40c->dma_cfg.dst_info.data_width,
direction,
- dma_flags & DMA_PREP_INTERRUPT,
- dev_addr, d40d->lli_tx_len,
- d40c->base->plat_data->llis_per_log);
+ dev_addr);
if (total_size < 0)
return -EINVAL;
@@ -1937,7 +1980,7 @@
}
d40d->lli_len = sgl_len;
- d40d->lli_tx_len = sgl_len;
+ d40d->lli_current = 0;
if (direction == DMA_FROM_DEVICE) {
dst_dev_addr = 0;
@@ -1958,11 +2001,10 @@
sgl_len,
src_dev_addr,
d40d->lli_phy.src,
- d40d->lli_phy.src_addr,
+ virt_to_phys(d40d->lli_phy.src),
d40c->src_def_cfg,
d40c->dma_cfg.src_info.data_width,
- d40c->dma_cfg.src_info.psize,
- true);
+ d40c->dma_cfg.src_info.psize);
if (res < 0)
return res;
@@ -1970,11 +2012,10 @@
sgl_len,
dst_dev_addr,
d40d->lli_phy.dst,
- d40d->lli_phy.dst_addr,
+ virt_to_phys(d40d->lli_phy.dst),
d40c->dst_def_cfg,
d40c->dma_cfg.dst_info.data_width,
- d40c->dma_cfg.dst_info.psize,
- true);
+ d40c->dma_cfg.dst_info.psize);
if (res < 0)
return res;
@@ -2001,17 +2042,11 @@
return ERR_PTR(-EINVAL);
}
- if (d40c->dma_cfg.pre_transfer)
- d40c->dma_cfg.pre_transfer(chan,
- d40c->dma_cfg.pre_transfer_data,
- sg_dma_len(sgl));
-
spin_lock_irqsave(&d40c->lock, flags);
d40d = d40_desc_get(d40c);
- spin_unlock_irqrestore(&d40c->lock, flags);
if (d40d == NULL)
- return NULL;
+ goto err;
if (d40c->log_num != D40_PHY_CHAN)
err = d40_prep_slave_sg_log(d40d, d40c, sgl, sg_len,
@@ -2024,7 +2059,7 @@
"[%s] Failed to prepare %s slave sg job: %d\n",
__func__,
d40c->log_num != D40_PHY_CHAN ? "log" : "phy", err);
- return NULL;
+ goto err;
}
d40d->txd.flags = dma_flags;
@@ -2033,7 +2068,14 @@
d40d->txd.tx_submit = d40_tx_submit;
+ spin_unlock_irqrestore(&d40c->lock, flags);
return &d40d->txd;
+
+err:
+ if (d40d)
+ d40_desc_free(d40c, d40d);
+ spin_unlock_irqrestore(&d40c->lock, flags);
+ return NULL;
}
static enum dma_status d40_tx_status(struct dma_chan *chan,
@@ -2166,14 +2208,25 @@
return;
}
- if (config_maxburst >= 16)
- psize = STEDMA40_PSIZE_LOG_16;
- else if (config_maxburst >= 8)
- psize = STEDMA40_PSIZE_LOG_8;
- else if (config_maxburst >= 4)
- psize = STEDMA40_PSIZE_LOG_4;
- else
- psize = STEDMA40_PSIZE_LOG_1;
+ if (d40c->log_num != D40_PHY_CHAN) {
+ if (config_maxburst >= 16)
+ psize = STEDMA40_PSIZE_LOG_16;
+ else if (config_maxburst >= 8)
+ psize = STEDMA40_PSIZE_LOG_8;
+ else if (config_maxburst >= 4)
+ psize = STEDMA40_PSIZE_LOG_4;
+ else
+ psize = STEDMA40_PSIZE_LOG_1;
+ } else {
+ if (config_maxburst >= 16)
+ psize = STEDMA40_PSIZE_PHY_16;
+ else if (config_maxburst >= 8)
+ psize = STEDMA40_PSIZE_PHY_8;
+ else if (config_maxburst >= 4)
+ psize = STEDMA40_PSIZE_PHY_4;
+ else
+ psize = STEDMA40_PSIZE_PHY_1;
+ }
/* Set up all the endpoint configs */
cfg->src_info.data_width = addr_width;
@@ -2185,6 +2238,13 @@
cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
+ /* Fill in register values */
+ if (d40c->log_num != D40_PHY_CHAN)
+ d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
+ else
+ d40_phy_cfg(cfg, &d40c->src_def_cfg,
+ &d40c->dst_def_cfg, false);
+
/* These settings will take precedence later */
d40c->runtime_addr = config_addr;
d40c->runtime_direction = config->direction;
@@ -2247,10 +2307,6 @@
d40c->base = base;
d40c->chan.device = dma;
- /* Invalidate lcla element */
- d40c->lcla.src_id = -1;
- d40c->lcla.dst_id = -1;
-
spin_lock_init(&d40c->lock);
d40c->log_num = D40_PHY_CHAN;
@@ -2281,6 +2337,7 @@
base->dma_slave.device_alloc_chan_resources = d40_alloc_chan_resources;
base->dma_slave.device_free_chan_resources = d40_free_chan_resources;
base->dma_slave.device_prep_dma_memcpy = d40_prep_memcpy;
+ base->dma_slave.device_prep_dma_sg = d40_prep_sg;
base->dma_slave.device_prep_slave_sg = d40_prep_slave_sg;
base->dma_slave.device_tx_status = d40_tx_status;
base->dma_slave.device_issue_pending = d40_issue_pending;
@@ -2301,10 +2358,12 @@
dma_cap_zero(base->dma_memcpy.cap_mask);
dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
+ dma_cap_set(DMA_SG, base->dma_slave.cap_mask);
base->dma_memcpy.device_alloc_chan_resources = d40_alloc_chan_resources;
base->dma_memcpy.device_free_chan_resources = d40_free_chan_resources;
base->dma_memcpy.device_prep_dma_memcpy = d40_prep_memcpy;
+ base->dma_slave.device_prep_dma_sg = d40_prep_sg;
base->dma_memcpy.device_prep_slave_sg = d40_prep_slave_sg;
base->dma_memcpy.device_tx_status = d40_tx_status;
base->dma_memcpy.device_issue_pending = d40_issue_pending;
@@ -2331,10 +2390,12 @@
dma_cap_zero(base->dma_both.cap_mask);
dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
+ dma_cap_set(DMA_SG, base->dma_slave.cap_mask);
base->dma_both.device_alloc_chan_resources = d40_alloc_chan_resources;
base->dma_both.device_free_chan_resources = d40_free_chan_resources;
base->dma_both.device_prep_dma_memcpy = d40_prep_memcpy;
+ base->dma_slave.device_prep_dma_sg = d40_prep_sg;
base->dma_both.device_prep_slave_sg = d40_prep_slave_sg;
base->dma_both.device_tx_status = d40_tx_status;
base->dma_both.device_issue_pending = d40_issue_pending;
@@ -2387,9 +2448,11 @@
/* Mark disabled channels as occupied */
for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
- base->phy_res[i].allocated_src = D40_ALLOC_PHY;
- base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
- num_phy_chans_avail--;
+ int chan = base->plat_data->disabled_channels[i];
+
+ base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
+ base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
+ num_phy_chans_avail--;
}
dev_info(base->dev, "%d of %d physical DMA channels available\n",
@@ -2441,6 +2504,7 @@
int num_phy_chans;
int i;
u32 val;
+ u32 rev;
clk = clk_get(&pdev->dev, NULL);
@@ -2479,21 +2543,26 @@
}
}
- /* Get silicon revision */
+ /* Get silicon revision and designer */
val = readl(virtbase + D40_DREG_PERIPHID2);
- if ((val & 0xf) != D40_PERIPHID2_DESIGNER) {
+ if ((val & D40_DREG_PERIPHID2_DESIGNER_MASK) !=
+ D40_HW_DESIGNER) {
dev_err(&pdev->dev,
"[%s] Unknown designer! Got %x wanted %x\n",
- __func__, val & 0xf, D40_PERIPHID2_DESIGNER);
+ __func__, val & D40_DREG_PERIPHID2_DESIGNER_MASK,
+ D40_HW_DESIGNER);
goto failure;
}
+ rev = (val & D40_DREG_PERIPHID2_REV_MASK) >>
+ D40_DREG_PERIPHID2_REV_POS;
+
/* The number of physical channels on this HW */
num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n",
- (val >> 4) & 0xf, res->start);
+ rev, res->start);
plat_data = pdev->dev.platform_data;
@@ -2515,7 +2584,7 @@
goto failure;
}
- base->rev = (val >> 4) & 0xf;
+ base->rev = rev;
base->clk = clk;
base->num_phy_chans = num_phy_chans;
base->num_log_chans = num_log_chans;
@@ -2549,7 +2618,10 @@
if (!base->lookup_log_chans)
goto failure;
}
- base->lcla_pool.alloc_map = kzalloc(num_phy_chans * sizeof(u32),
+
+ base->lcla_pool.alloc_map = kzalloc(num_phy_chans *
+ sizeof(struct d40_desc *) *
+ D40_LCLA_LINK_PER_EVENT_GRP,
GFP_KERNEL);
if (!base->lcla_pool.alloc_map)
goto failure;
@@ -2563,7 +2635,7 @@
return base;
failure:
- if (clk) {
+ if (!IS_ERR(clk)) {
clk_disable(clk);
clk_put(clk);
}
@@ -2700,8 +2772,10 @@
if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
base->lcla_pool.base = (void *)page_list[i];
} else {
- /* After many attempts, no succees with finding the correct
- * alignment try with allocating a big buffer */
+ /*
+ * After many attempts and no succees with finding the correct
+ * alignment, try with allocating a big buffer.
+ */
dev_warn(base->dev,
"[%s] Failed to get %d pages @ 18 bit align.\n",
__func__, base->lcla_pool.pages);
@@ -2794,8 +2868,6 @@
spin_lock_init(&base->lcla_pool.lock);
- base->lcla_pool.num_blocks = base->num_phy_chans;
-
base->irq = platform_get_irq(pdev, 0);
ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
@@ -2823,8 +2895,9 @@
if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
free_pages((unsigned long)base->lcla_pool.base,
base->lcla_pool.pages);
- if (base->lcla_pool.base_unaligned)
- kfree(base->lcla_pool.base_unaligned);
+
+ kfree(base->lcla_pool.base_unaligned);
+
if (base->phy_lcpa)
release_mem_region(base->phy_lcpa,
base->lcpa_size);
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c
index d937f76..86a306d 100644
--- a/drivers/dma/ste_dma40_ll.c
+++ b/drivers/dma/ste_dma40_ll.c
@@ -1,10 +1,8 @@
/*
- * driver/dma/ste_dma40_ll.c
- *
- * Copyright (C) ST-Ericsson 2007-2010
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
#include <linux/kernel.h>
@@ -39,16 +37,13 @@
cfg->dir == STEDMA40_PERIPH_TO_PERIPH)
l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
- l3 |= 1 << D40_MEM_LCSP3_DCFG_TIM_POS;
l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
- l3 |= 1 << D40_MEM_LCSP3_DTCP_POS;
l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS;
l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
- l1 |= 1 << D40_MEM_LCSP1_STCP_POS;
*lcsp1 = l1;
*lcsp3 = l3;
@@ -197,8 +192,7 @@
dma_addr_t lli_phys,
u32 reg_cfg,
u32 data_width,
- int psize,
- bool term_int)
+ int psize)
{
int total_size = 0;
int i;
@@ -238,7 +232,7 @@
}
return total_size;
- err:
+err:
return err;
}
@@ -271,11 +265,59 @@
/* DMA logical lli operations */
+static void d40_log_lli_link(struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int next)
+{
+ u32 slos = 0;
+ u32 dlos = 0;
+
+ if (next != -EINVAL) {
+ slos = next * 2;
+ dlos = next * 2 + 1;
+ } else {
+ lli_dst->lcsp13 |= D40_MEM_LCSP1_SCFG_TIM_MASK;
+ lli_dst->lcsp13 |= D40_MEM_LCSP3_DTCP_MASK;
+ }
+
+ lli_src->lcsp13 = (lli_src->lcsp13 & ~D40_MEM_LCSP1_SLOS_MASK) |
+ (slos << D40_MEM_LCSP1_SLOS_POS);
+
+ lli_dst->lcsp13 = (lli_dst->lcsp13 & ~D40_MEM_LCSP1_SLOS_MASK) |
+ (dlos << D40_MEM_LCSP1_SLOS_POS);
+}
+
+void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
+ struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int next)
+{
+ d40_log_lli_link(lli_dst, lli_src, next);
+
+ writel(lli_src->lcsp02, &lcpa[0].lcsp0);
+ writel(lli_src->lcsp13, &lcpa[0].lcsp1);
+ writel(lli_dst->lcsp02, &lcpa[0].lcsp2);
+ writel(lli_dst->lcsp13, &lcpa[0].lcsp3);
+}
+
+void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
+ struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int next)
+{
+ d40_log_lli_link(lli_dst, lli_src, next);
+
+ writel(lli_src->lcsp02, &lcla[0].lcsp02);
+ writel(lli_src->lcsp13, &lcla[0].lcsp13);
+ writel(lli_dst->lcsp02, &lcla[1].lcsp02);
+ writel(lli_dst->lcsp13, &lcla[1].lcsp13);
+}
+
void d40_log_fill_lli(struct d40_log_lli *lli,
dma_addr_t data, u32 data_size,
- u32 lli_next_off, u32 reg_cfg,
+ u32 reg_cfg,
u32 data_width,
- bool term_int, bool addr_inc)
+ bool addr_inc)
{
lli->lcsp13 = reg_cfg;
@@ -290,165 +332,69 @@
if (addr_inc)
lli->lcsp13 |= D40_MEM_LCSP1_SCFG_INCR_MASK;
- lli->lcsp13 |= D40_MEM_LCSP3_DTCP_MASK;
- /* If this scatter list entry is the last one, no next link */
- lli->lcsp13 |= (lli_next_off << D40_MEM_LCSP1_SLOS_POS) &
- D40_MEM_LCSP1_SLOS_MASK;
-
- if (term_int)
- lli->lcsp13 |= D40_MEM_LCSP1_SCFG_TIM_MASK;
- else
- lli->lcsp13 &= ~D40_MEM_LCSP1_SCFG_TIM_MASK;
}
-int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
- struct scatterlist *sg,
+int d40_log_sg_to_dev(struct scatterlist *sg,
int sg_len,
struct d40_log_lli_bidir *lli,
struct d40_def_lcsp *lcsp,
u32 src_data_width,
u32 dst_data_width,
enum dma_data_direction direction,
- bool term_int, dma_addr_t dev_addr, int max_len,
- int llis_per_log)
+ dma_addr_t dev_addr)
{
int total_size = 0;
struct scatterlist *current_sg = sg;
int i;
- u32 next_lli_off_dst = 0;
- u32 next_lli_off_src = 0;
for_each_sg(sg, current_sg, sg_len, i) {
total_size += sg_dma_len(current_sg);
- /*
- * If this scatter list entry is the last one or
- * max length, terminate link.
- */
- if (sg_len - 1 == i || ((i+1) % max_len == 0)) {
- next_lli_off_src = 0;
- next_lli_off_dst = 0;
- } else {
- if (next_lli_off_dst == 0 &&
- next_lli_off_src == 0) {
- /* The first lli will be at next_lli_off */
- next_lli_off_dst = (lcla->dst_id *
- llis_per_log + 1);
- next_lli_off_src = (lcla->src_id *
- llis_per_log + 1);
- } else {
- next_lli_off_dst++;
- next_lli_off_src++;
- }
- }
-
if (direction == DMA_TO_DEVICE) {
d40_log_fill_lli(&lli->src[i],
sg_phys(current_sg),
sg_dma_len(current_sg),
- next_lli_off_src,
lcsp->lcsp1, src_data_width,
- false,
true);
d40_log_fill_lli(&lli->dst[i],
dev_addr,
sg_dma_len(current_sg),
- next_lli_off_dst,
lcsp->lcsp3, dst_data_width,
- /* No next == terminal interrupt */
- term_int && !next_lli_off_dst,
false);
} else {
d40_log_fill_lli(&lli->dst[i],
sg_phys(current_sg),
sg_dma_len(current_sg),
- next_lli_off_dst,
lcsp->lcsp3, dst_data_width,
- /* No next == terminal interrupt */
- term_int && !next_lli_off_dst,
true);
d40_log_fill_lli(&lli->src[i],
dev_addr,
sg_dma_len(current_sg),
- next_lli_off_src,
lcsp->lcsp1, src_data_width,
- false,
false);
}
}
return total_size;
}
-int d40_log_sg_to_lli(int lcla_id,
- struct scatterlist *sg,
+int d40_log_sg_to_lli(struct scatterlist *sg,
int sg_len,
struct d40_log_lli *lli_sg,
u32 lcsp13, /* src or dst*/
- u32 data_width,
- bool term_int, int max_len, int llis_per_log)
+ u32 data_width)
{
int total_size = 0;
struct scatterlist *current_sg = sg;
int i;
- u32 next_lli_off = 0;
for_each_sg(sg, current_sg, sg_len, i) {
total_size += sg_dma_len(current_sg);
- /*
- * If this scatter list entry is the last one or
- * max length, terminate link.
- */
- if (sg_len - 1 == i || ((i+1) % max_len == 0))
- next_lli_off = 0;
- else {
- if (next_lli_off == 0)
- /* The first lli will be at next_lli_off */
- next_lli_off = lcla_id * llis_per_log + 1;
- else
- next_lli_off++;
- }
-
d40_log_fill_lli(&lli_sg[i],
sg_phys(current_sg),
sg_dma_len(current_sg),
- next_lli_off,
lcsp13, data_width,
- term_int && !next_lli_off,
true);
}
return total_size;
}
-
-int d40_log_lli_write(struct d40_log_lli_full *lcpa,
- struct d40_log_lli *lcla_src,
- struct d40_log_lli *lcla_dst,
- struct d40_log_lli *lli_dst,
- struct d40_log_lli *lli_src,
- int llis_per_log)
-{
- u32 slos;
- u32 dlos;
- int i;
-
- writel(lli_src->lcsp02, &lcpa->lcsp0);
- writel(lli_src->lcsp13, &lcpa->lcsp1);
- writel(lli_dst->lcsp02, &lcpa->lcsp2);
- writel(lli_dst->lcsp13, &lcpa->lcsp3);
-
- slos = lli_src->lcsp13 & D40_MEM_LCSP1_SLOS_MASK;
- dlos = lli_dst->lcsp13 & D40_MEM_LCSP3_DLOS_MASK;
-
- for (i = 0; (i < llis_per_log) && slos && dlos; i++) {
- writel(lli_src[i + 1].lcsp02, &lcla_src[i].lcsp02);
- writel(lli_src[i + 1].lcsp13, &lcla_src[i].lcsp13);
- writel(lli_dst[i + 1].lcsp02, &lcla_dst[i].lcsp02);
- writel(lli_dst[i + 1].lcsp13, &lcla_dst[i].lcsp13);
-
- slos = lli_src[i + 1].lcsp13 & D40_MEM_LCSP1_SLOS_MASK;
- dlos = lli_dst[i + 1].lcsp13 & D40_MEM_LCSP3_DLOS_MASK;
- }
-
- return i;
-
-}
diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h
index 9c0fa2f..37f81e8 100644
--- a/drivers/dma/ste_dma40_ll.h
+++ b/drivers/dma/ste_dma40_ll.h
@@ -1,10 +1,8 @@
/*
- * driver/dma/ste_dma40_ll.h
- *
- * Copyright (C) ST-Ericsson 2007-2010
+ * Copyright (C) ST-Ericsson SA 2007-2010
+ * Author: Per Friden <per.friden@stericsson.com> for ST-Ericsson SA
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson SA
* License terms: GNU General Public License (GPL) version 2
- * Author: Per Friden <per.friden@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
*/
#ifndef STE_DMA40_LL_H
#define STE_DMA40_LL_H
@@ -163,6 +161,9 @@
#define D40_DREG_PERIPHID0 0xFE0
#define D40_DREG_PERIPHID1 0xFE4
#define D40_DREG_PERIPHID2 0xFE8
+#define D40_DREG_PERIPHID2_REV_POS 4
+#define D40_DREG_PERIPHID2_REV_MASK (0xf << D40_DREG_PERIPHID2_REV_POS)
+#define D40_DREG_PERIPHID2_DESIGNER_MASK 0xf
#define D40_DREG_PERIPHID3 0xFEC
#define D40_DREG_CELLID0 0xFF0
#define D40_DREG_CELLID1 0xFF4
@@ -199,8 +200,6 @@
*
* @src: Register settings for src channel.
* @dst: Register settings for dst channel.
- * @dst_addr: Physical destination address.
- * @src_addr: Physical source address.
*
* All DMA transfers have a source and a destination.
*/
@@ -208,8 +207,6 @@
struct d40_phy_lli_bidir {
struct d40_phy_lli *src;
struct d40_phy_lli *dst;
- dma_addr_t dst_addr;
- dma_addr_t src_addr;
};
@@ -271,29 +268,16 @@
u32 lcsp1;
};
-/**
- * struct d40_lcla_elem - Info for one LCA element.
- *
- * @src_id: logical channel src id
- * @dst_id: logical channel dst id
- * @src: LCPA formated src parameters
- * @dst: LCPA formated dst parameters
- *
- */
-struct d40_lcla_elem {
- int src_id;
- int dst_id;
- struct d40_log_lli *src;
- struct d40_log_lli *dst;
-};
-
/* Physical channels */
void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
- u32 *src_cfg, u32 *dst_cfg, bool is_log);
+ u32 *src_cfg,
+ u32 *dst_cfg,
+ bool is_log);
void d40_log_cfg(struct stedma40_chan_cfg *cfg,
- u32 *lcsp1, u32 *lcsp2);
+ u32 *lcsp1,
+ u32 *lcsp2);
int d40_phy_sg_to_lli(struct scatterlist *sg,
int sg_len,
@@ -302,8 +286,7 @@
dma_addr_t lli_phys,
u32 reg_cfg,
u32 data_width,
- int psize,
- bool term_int);
+ int psize);
int d40_phy_fill_lli(struct d40_phy_lli *lli,
dma_addr_t data,
@@ -323,35 +306,35 @@
/* Logical channels */
void d40_log_fill_lli(struct d40_log_lli *lli,
- dma_addr_t data, u32 data_size,
- u32 lli_next_off, u32 reg_cfg,
+ dma_addr_t data,
+ u32 data_size,
+ u32 reg_cfg,
u32 data_width,
- bool term_int, bool addr_inc);
+ bool addr_inc);
-int d40_log_sg_to_dev(struct d40_lcla_elem *lcla,
- struct scatterlist *sg,
+int d40_log_sg_to_dev(struct scatterlist *sg,
int sg_len,
struct d40_log_lli_bidir *lli,
struct d40_def_lcsp *lcsp,
u32 src_data_width,
u32 dst_data_width,
enum dma_data_direction direction,
- bool term_int, dma_addr_t dev_addr, int max_len,
- int llis_per_log);
+ dma_addr_t dev_addr);
-int d40_log_lli_write(struct d40_log_lli_full *lcpa,
- struct d40_log_lli *lcla_src,
- struct d40_log_lli *lcla_dst,
- struct d40_log_lli *lli_dst,
- struct d40_log_lli *lli_src,
- int llis_per_log);
-
-int d40_log_sg_to_lli(int lcla_id,
- struct scatterlist *sg,
+int d40_log_sg_to_lli(struct scatterlist *sg,
int sg_len,
struct d40_log_lli *lli_sg,
u32 lcsp13, /* src or dst*/
- u32 data_width,
- bool term_int, int max_len, int llis_per_log);
+ u32 data_width);
+
+void d40_log_lli_lcpa_write(struct d40_log_lli_full *lcpa,
+ struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int next);
+
+void d40_log_lli_lcla_write(struct d40_log_lli *lcla,
+ struct d40_log_lli *lli_dst,
+ struct d40_log_lli *lli_src,
+ int next);
#endif /* STE_DMA40_LLI_H */
diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h
new file mode 100644
index 0000000..521a0f8
--- /dev/null
+++ b/include/linux/amba/pl08x.h
@@ -0,0 +1,222 @@
+/*
+ * linux/amba/pl08x.h - ARM PrimeCell DMA Controller driver
+ *
+ * Copyright (C) 2005 ARM Ltd
+ * Copyright (C) 2010 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * pl08x information required by platform code
+ *
+ * Please credit ARM.com
+ * Documentation: ARM DDI 0196D
+ *
+ */
+
+#ifndef AMBA_PL08X_H
+#define AMBA_PL08X_H
+
+/* We need sizes of structs from this header */
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+/**
+ * struct pl08x_channel_data - data structure to pass info between
+ * platform and PL08x driver regarding channel configuration
+ * @bus_id: name of this device channel, not just a device name since
+ * devices may have more than one channel e.g. "foo_tx"
+ * @min_signal: the minimum DMA signal number to be muxed in for this
+ * channel (for platforms supporting muxed signals). If you have
+ * static assignments, make sure this is set to the assigned signal
+ * number, PL08x have 16 possible signals in number 0 thru 15 so
+ * when these are not enough they often get muxed (in hardware)
+ * disabling simultaneous use of the same channel for two devices.
+ * @max_signal: the maximum DMA signal number to be muxed in for
+ * the channel. Set to the same as min_signal for
+ * devices with static assignments
+ * @muxval: a number usually used to poke into some mux regiser to
+ * mux in the signal to this channel
+ * @cctl_opt: default options for the channel control register
+ * @addr: source/target address in physical memory for this DMA channel,
+ * can be the address of a FIFO register for burst requests for example.
+ * This can be left undefined if the PrimeCell API is used for configuring
+ * this.
+ * @circular_buffer: whether the buffer passed in is circular and
+ * shall simply be looped round round (like a record baby round
+ * round round round)
+ * @single: the device connected to this channel will request single
+ * DMA transfers, not bursts. (Bursts are default.)
+ */
+struct pl08x_channel_data {
+ char *bus_id;
+ int min_signal;
+ int max_signal;
+ u32 muxval;
+ u32 cctl;
+ u32 ccfg;
+ dma_addr_t addr;
+ bool circular_buffer;
+ bool single;
+};
+
+/**
+ * Struct pl08x_bus_data - information of source or destination
+ * busses for a transfer
+ * @addr: current address
+ * @maxwidth: the maximum width of a transfer on this bus
+ * @buswidth: the width of this bus in bytes: 1, 2 or 4
+ * @fill_bytes: bytes required to fill to the next bus memory
+ * boundary
+ */
+struct pl08x_bus_data {
+ dma_addr_t addr;
+ u8 maxwidth;
+ u8 buswidth;
+ u32 fill_bytes;
+};
+
+/**
+ * struct pl08x_phy_chan - holder for the physical channels
+ * @id: physical index to this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @signal: the physical signal (aka channel) serving this
+ * physical channel right now
+ * @serving: the virtual channel currently being served by this
+ * physical channel
+ */
+struct pl08x_phy_chan {
+ unsigned int id;
+ void __iomem *base;
+ spinlock_t lock;
+ int signal;
+ struct pl08x_dma_chan *serving;
+ u32 csrc;
+ u32 cdst;
+ u32 clli;
+ u32 cctl;
+ u32 ccfg;
+};
+
+/**
+ * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor
+ * @llis_bus: DMA memory address (physical) start for the LLIs
+ * @llis_va: virtual memory address start for the LLIs
+ */
+struct pl08x_txd {
+ struct dma_async_tx_descriptor tx;
+ struct list_head node;
+ enum dma_data_direction direction;
+ struct pl08x_bus_data srcbus;
+ struct pl08x_bus_data dstbus;
+ int len;
+ dma_addr_t llis_bus;
+ void *llis_va;
+ struct pl08x_channel_data *cd;
+ bool active;
+ /*
+ * Settings to be put into the physical channel when we
+ * trigger this txd
+ */
+ u32 csrc;
+ u32 cdst;
+ u32 clli;
+ u32 cctl;
+};
+
+/**
+ * struct pl08x_dma_chan_state - holds the PL08x specific virtual
+ * channel states
+ * @PL08X_CHAN_IDLE: the channel is idle
+ * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport
+ * channel, but the transfer is currently paused
+ * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum pl08x_dma_chan_state {
+ PL08X_CHAN_IDLE,
+ PL08X_CHAN_RUNNING,
+ PL08X_CHAN_PAUSED,
+ PL08X_CHAN_WAITING,
+};
+
+/**
+ * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel
+ * @chan: wrappped abstract channel
+ * @phychan: the physical channel utilized by this channel, if there is one
+ * @tasklet: tasklet scheduled by the IRQ to handle actual work etc
+ * @name: name of channel
+ * @cd: channel platform data
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @runtime_direction: current direction of this channel according to
+ * runtime config
+ * @lc: last completed transaction on this channel
+ * @desc_list: queued transactions pending on this channel
+ * @at: active transaction on this channel
+ * @lockflags: sometimes we let a lock last between two function calls,
+ * especially prep/submit, and then we need to store the IRQ flags
+ * in the channel state, here
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, paused, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ * @waiting: a TX descriptor on this channel which is waiting for
+ * a physical channel to become available
+ */
+struct pl08x_dma_chan {
+ struct dma_chan chan;
+ struct pl08x_phy_chan *phychan;
+ struct tasklet_struct tasklet;
+ char *name;
+ struct pl08x_channel_data *cd;
+ dma_addr_t runtime_addr;
+ enum dma_data_direction runtime_direction;
+ atomic_t last_issued;
+ dma_cookie_t lc;
+ struct list_head desc_list;
+ struct pl08x_txd *at;
+ unsigned long lockflags;
+ spinlock_t lock;
+ void *host;
+ enum pl08x_dma_chan_state state;
+ bool slave;
+ struct pl08x_txd *waiting;
+};
+
+/**
+ * struct pl08x_platform_data - the platform configuration for the
+ * PL08x PrimeCells.
+ * @slave_channels: the channels defined for the different devices on the
+ * platform, all inclusive, including multiplexed channels. The available
+ * physical channels will be multiplexed around these signals as they
+ * are requested, just enumerate all possible channels.
+ * @get_signal: request a physical signal to be used for a DMA
+ * transfer immediately: if there is some multiplexing or similar blocking
+ * the use of the channel the transfer can be denied by returning
+ * less than zero, else it returns the allocated signal number
+ * @put_signal: indicate to the platform that this physical signal is not
+ * running any DMA transfer and multiplexing can be recycled
+ * @bus_bit_lli: Bit[0] of the address indicated which AHB bus master the
+ * LLI addresses are on 0/1 Master 1/2.
+ */
+struct pl08x_platform_data {
+ struct pl08x_channel_data *slave_channels;
+ unsigned int num_slave_channels;
+ struct pl08x_channel_data memcpy_channel;
+ int (*get_signal)(struct pl08x_dma_chan *);
+ void (*put_signal)(struct pl08x_dma_chan *);
+};
+
+#ifdef CONFIG_AMBA_PL08X
+bool pl08x_filter_id(struct dma_chan *chan, void *chan_id);
+#else
+static inline bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
+{
+ return false;
+}
+#endif
+
+#endif /* AMBA_PL08X_H */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 2218fdc..3934ebd 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -64,6 +64,7 @@
DMA_PQ_VAL,
DMA_MEMSET,
DMA_INTERRUPT,
+ DMA_SG,
DMA_PRIVATE,
DMA_ASYNC_TX,
DMA_SLAVE,
@@ -120,12 +121,15 @@
* configuration data in statically from the platform). An additional
* argument of struct dma_slave_config must be passed in with this
* command.
+ * @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
+ * into external start mode.
*/
enum dma_ctrl_cmd {
DMA_TERMINATE_ALL,
DMA_PAUSE,
DMA_RESUME,
DMA_SLAVE_CONFIG,
+ FSLDMA_EXTERNAL_START,
};
/**
@@ -477,6 +481,11 @@
unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
struct dma_chan *chan, unsigned long flags);
+ struct dma_async_tx_descriptor *(*device_prep_dma_sg)(
+ struct dma_chan *chan,
+ struct scatterlist *dst_sg, unsigned int dst_nents,
+ struct scatterlist *src_sg, unsigned int src_nents,
+ unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_slave_sg)(
struct dma_chan *chan, struct scatterlist *sgl,
@@ -589,7 +598,7 @@
return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
}
-static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
{
return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
}
diff --git a/include/linux/intel_mid_dma.h b/include/linux/intel_mid_dma.h
index d9d08b6..10496bd 100644
--- a/include/linux/intel_mid_dma.h
+++ b/include/linux/intel_mid_dma.h
@@ -27,14 +27,7 @@
#include <linux/dmaengine.h>
-/*DMA transaction width, src and dstn width would be same
-The DMA length must be width aligned,
-for 32 bit width the length must be 32 bit (4bytes) aligned only*/
-enum intel_mid_dma_width {
- LNW_DMA_WIDTH_8BIT = 0x0,
- LNW_DMA_WIDTH_16BIT = 0x1,
- LNW_DMA_WIDTH_32BIT = 0x2,
-};
+#define DMA_PREP_CIRCULAR_LIST (1 << 10)
/*DMA mode configurations*/
enum intel_mid_dma_mode {
@@ -69,18 +62,15 @@
* @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
* @src_msize: Source DMA burst size
* @dst_msize: Dst DMA burst size
+ * @per_addr: Periphral address
* @device_instance: DMA peripheral device instance, we can have multiple
* peripheral device connected to single DMAC
*/
struct intel_mid_dma_slave {
- enum dma_data_direction dirn;
- enum intel_mid_dma_width src_width; /*width of DMA src txn*/
- enum intel_mid_dma_width dst_width; /*width of DMA dst txn*/
enum intel_mid_dma_hs_mode hs_mode; /*handshaking*/
enum intel_mid_dma_mode cfg_mode; /*mode configuration*/
- enum intel_mid_dma_msize src_msize; /*size if src burst*/
- enum intel_mid_dma_msize dst_msize; /*size of dst burst*/
unsigned int device_instance; /*0, 1 for periphral instance*/
+ struct dma_slave_config dma_slave;
};
#endif /*__INTEL_MID_DMA_H__*/