diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt
index 44bd766..85eaead 100644
--- a/Documentation/filesystems/nfs-rdma.txt
+++ b/Documentation/filesystems/nfs-rdma.txt
@@ -251,7 +251,7 @@
 
     Instruct the server to listen on the RDMA transport:
 
-    $ echo rdma 2050 > /proc/fs/nfsd/portlist
+    $ echo rdma 20049 > /proc/fs/nfsd/portlist
 
   - On the client system
 
@@ -263,7 +263,7 @@
     Regardless of how the client was built (module or built-in), use this
     command to mount the NFS/RDMA server:
 
-    $ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt
+    $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt
 
     To verify that the mount is using RDMA, run "cat /proc/mounts" and check
     the "proto" field for the given mount.
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 923f9dd..f3355b6 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -3,7 +3,7 @@
 KCPPFLAGS
 --------------------------------------------------
 Additional options to pass when preprocessing. The preprocessing options
-will be used in all cases where kbuild do preprocessing including
+will be used in all cases where kbuild does preprocessing including
 building C files and assembler files.
 
 KAFLAGS
@@ -16,7 +16,7 @@
 
 KBUILD_VERBOSE
 --------------------------------------------------
-Set the kbuild verbosity. Can be assinged same values as "V=...".
+Set the kbuild verbosity. Can be assigned same values as "V=...".
 See make help for the full list.
 Setting "V=..." takes precedence over KBUILD_VERBOSE.
 
@@ -35,14 +35,14 @@
 --------------------------------------------------
 Specify the output directory when building the kernel.
 The output directory can also be specificed using "O=...".
-Setting "O=..." takes precedence over KBUILD_OUTPUT
+Setting "O=..." takes precedence over KBUILD_OUTPUT.
 
 ARCH
 --------------------------------------------------
 Set ARCH to the architecture to be built.
 In most cases the name of the architecture is the same as the
 directory name found in the arch/ directory.
-But some architectures suach as x86 and sparc has aliases.
+But some architectures such as x86 and sparc have aliases.
 x86: i386 for 32 bit, x86_64 for 64 bit
 sparc: sparc for 32 bit, sparc64 for 64 bit
 
@@ -63,7 +63,7 @@
 INSTALL_PATH
 --------------------------------------------------
 INSTALL_PATH specifies where to place the updated kernel and system map
-images. Default is /boot, but you can set it to other values
+images. Default is /boot, but you can set it to other values.
 
 
 MODLIB
@@ -90,7 +90,7 @@
 
 INSTALL_FW_PATH
 --------------------------------------------------
-INSTALL_FW_PATH specify where to install the firmware blobs.
+INSTALL_FW_PATH specifies where to install the firmware blobs.
 The default value is:
 
     $(INSTALL_MOD_PATH)/lib/firmware
@@ -99,7 +99,7 @@
 
 INSTALL_HDR_PATH
 --------------------------------------------------
-INSTALL_HDR_PATH specify where to install user space headers when
+INSTALL_HDR_PATH specifies where to install user space headers when
 executing "make headers_*".
 The default value is:
 
@@ -112,22 +112,23 @@
 
 KBUILD_MODPOST_WARN
 --------------------------------------------------
-KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
-symbols in the final module linking stage.
+KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined
+symbols in the final module linking stage. It changes such errors
+into warnings.
 
-KBUILD_MODPOST_FINAL
+KBUILD_MODPOST_NOFINAL
 --------------------------------------------------
 KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
-This is solely usefull to speed up test compiles.
+This is solely useful to speed up test compiles.
 
 KBUILD_EXTRA_SYMBOLS
 --------------------------------------------------
-For modules use symbols from another modules.
+For modules that use symbols from other modules.
 See more details in modules.txt.
 
 ALLSOURCE_ARCHS
 --------------------------------------------------
-For tags/TAGS/cscope targets, you can specify more than one archs
-to be included in the databases, separated by blankspace. e.g.
+For tags/TAGS/cscope targets, you can specify more than one arch
+to be included in the databases, separated by blank space. E.g.:
 
     $ make ALLSOURCE_ARCHS="x86 mips arm" tags
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8511d35..d8362cf 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -577,9 +577,6 @@
 			a memory unit (amount[KMG]). See also
 			Documentation/kdump/kdump.txt for a example.
 
-	cs4232=		[HW,OSS]
-			Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>
-
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
 
@@ -732,10 +729,6 @@
 			Default value is 0.
 			Value can be changed at runtime via /selinux/enforce.
 
-	es1371=		[HW,OSS]
-			Format: <spdif>,[<nomix>,[<amplifier>]]
-			See also header of sound/oss/es1371.c.
-
 	ether=		[HW,NET] Ethernet cards parameters
 			This option is obsoleted by the "netdev=" option, which
 			has equivalent usage. See its documentation for details.
diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt
index 3c2f2b3..8d02207 100644
--- a/Documentation/networking/netconsole.txt
+++ b/Documentation/networking/netconsole.txt
@@ -51,7 +51,8 @@
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>' or syslogd.
+The remote host can run either 'netcat -u -l -p <port>',
+'nc -l -u <port>' or syslogd.
 
 Dynamic reconfiguration:
 ========================
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 64eb110..0f5d26b 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -349,6 +349,7 @@
 STAC92HD83*
 ===========
   ref		Reference board
+  mic-ref	Reference board with power managment for ports
 
 STAC9872
 ========
diff --git a/MAINTAINERS b/MAINTAINERS
index 3fe4dc2..d992d40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2102,7 +2102,8 @@
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
 L:	linux-i2c@vger.kernel.org
-T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
+W:	http://i2c.wiki.kernel.org/
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER
diff --git a/Makefile b/Makefile
index 207303d..cf9e20d 100644
--- a/Makefile
+++ b/Makefile
@@ -213,6 +213,10 @@
 # Where to locate arch specific headers
 hdr-arch  := $(SRCARCH)
 
+ifeq ($(ARCH),m68knommu)
+       hdr-arch  := m68k
+endif
+
 KCONFIG_CONFIG	?= .config
 
 # SHELL used by kbuild
@@ -606,25 +610,20 @@
 MODLIB	= $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
 export MODLIB
 
-strip-symbols := $(srctree)/scripts/strip-symbols \
-		 $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
-
 #
-# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
-# they get installed.  If INSTALL_MOD_STRIP is '1', then the default
-# options (see below) will be used.  Otherwise, INSTALL_MOD_STRIP will
-# be used as the option(s) to the objcopy command.
+#  INSTALL_MOD_STRIP, if defined, will cause modules to be
+#  stripped after they are installed.  If INSTALL_MOD_STRIP is '1', then
+#  the default option --strip-debug will be used.  Otherwise,
+#  INSTALL_MOD_STRIP will used as the options to the strip command.
+
 ifdef INSTALL_MOD_STRIP
 ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(OBJCOPY) --strip-debug
-ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
-mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
-endif
+mod_strip_cmd = $(STRIP) --strip-debug
 else
-mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
 endif # INSTALL_MOD_STRIP=1
 else
-mod_strip_cmd = false
+mod_strip_cmd = true
 endif # INSTALL_MOD_STRIP
 export mod_strip_cmd
 
@@ -754,7 +753,6 @@
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
 
 define verify_kallsyms
 	$(Q)$(if $($(quiet)cmd_sysmap),                                      \
@@ -779,41 +777,24 @@
 
 # Generate .S file with all kernel symbols
 quiet_cmd_kallsyms = KSYM    $@
-      cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
-		     | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
+      cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
+                     $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
 
-quiet_cmd_kstrip = STRIP   $@
-      cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
-
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
-$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
+.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
 	$(call if_changed_dep,as_o_S)
 
-ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
-strip-ext := .stripped
-endif
-
-.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
+.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
 	$(call cmd,kallsyms)
 
-# make -jN seems to have problems with intermediate files, see bug #3330.
-.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
-.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
-	$(call cmd,kstrip)
-
-ifneq ($(CONFIG_DEBUG_INFO),y)
-.tmp_vmlinux%: LDFLAGS_vmlinux += -S
-endif
 # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
-	$(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
+.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
+	$(call if_changed_rule,ksym_ld)
 
-.tmp_vmlinux0$(strip-ext):
-	$(Q)echo "placeholder" >$@
+.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
+	$(call if_changed,vmlinux__)
 
-.tmp_vmlinux1: .tmp_kallsyms0.o
-.tmp_vmlinux2: .tmp_kallsyms1.o
-.tmp_vmlinux3: .tmp_kallsyms2.o
+.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
+	$(call if_changed,vmlinux__)
 
 # Needs to visit scripts/ before $(KALLSYMS) can be used.
 $(KALLSYMS): scripts ;
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 17a17b4..1037bba 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -24,6 +24,15 @@
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ *  An entry with a NULL ID is assumed to be a wildcard.
+ *  If an entry has a device ID, it must match
+ *  If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
 static struct clk *clk_find(const char *dev_id, const char *con_id)
 {
 	struct clk_lookup *p;
@@ -31,13 +40,17 @@
 	int match, best = 0;
 
 	list_for_each_entry(p, &clocks, node) {
-		if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
-			continue;
 		match = 0;
-		if (p->dev_id)
-			match += 2 * (strcmp(p->dev_id, dev_id) == 0);
-		if (p->con_id)
-			match += 1 * (strcmp(p->con_id, con_id) == 0);
+		if (p->dev_id) {
+			if (!dev_id || strcmp(p->dev_id, dev_id))
+				continue;
+			match += 2;
+		}
+		if (p->con_id) {
+			if (!con_id || strcmp(p->con_id, con_id))
+				continue;
+			match += 1;
+		}
 		if (match == 0)
 			continue;
 
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index ce90958..f7a272c 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -719,8 +719,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -744,7 +744,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index 2c4aa11..7647325 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -767,7 +767,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index bf97801..bc6bd9f 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -676,7 +676,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -703,7 +703,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 868fb7b..238b218 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -636,7 +636,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index de43fc6..9f7a99a 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -610,7 +610,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 38e6a0a..e0ee706 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -582,7 +582,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 93b779f..01d1ef9 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -660,7 +660,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -687,7 +687,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index a7ddd94..036a126 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -670,7 +670,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -697,7 +697,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index df0d6ee..7e018a0 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -665,7 +665,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index 811bebb..237a2a6 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -566,7 +566,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -593,7 +593,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 85c80f7..a19e824 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -723,7 +723,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index b2bbf21..80222fe 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -750,7 +750,7 @@
 # Other I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f945105..8448108 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -722,7 +722,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -749,7 +749,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index 46f1c9d..227da08 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -763,8 +763,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig
index c3e3418..744086f 100644
--- a/arch/arm/configs/colibri_defconfig
+++ b/arch/arm/configs/colibri_defconfig
@@ -801,7 +801,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index 9876543..d6cd165 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -982,8 +982,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1008,7 +1008,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 67e65e4..29f68c2 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -679,7 +679,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 9970214..f7b60ce 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -704,7 +704,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index cfeb817..ca52073 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -721,7 +721,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -747,7 +747,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 21aa013..3f89d5f 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -681,7 +681,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index 2a84d55..d5ee16e 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -877,7 +877,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -900,7 +900,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 299dc22..6ace512 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -801,7 +801,7 @@
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 482e570..89c1776 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -744,7 +744,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 8612f58..d70177b 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -847,7 +847,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 8b0098d..eec4882 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -746,7 +746,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 84680db..57526c1 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -768,7 +768,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 4a2f7b2..ef97561 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -900,7 +900,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index fc14932..95cd8df 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -1083,7 +1083,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 6dd95a2..9f92fc5 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -603,7 +603,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index ab8b1e0..4bc3807 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -905,8 +905,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -930,7 +930,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index 17da7c3..b720fcf 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -654,7 +654,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -675,7 +675,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 4d11678..73ba62b 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -678,7 +678,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index 3b4ecf2..cc3b06e 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -580,7 +580,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCA9633=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index d38ebf8..83c817f 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -832,7 +832,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index 568ef17..672f6db 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -767,7 +767,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -798,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index 325f1e1..e0e4e98 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -774,8 +774,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -798,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 92ccdc6..d81ea21 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -737,7 +737,7 @@
 #
 # Other I2C Chip support
 #
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index e042d27..4c6fb7e 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -687,8 +687,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 09543f4..b54ad2e 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -713,8 +713,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -740,7 +740,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index b0617c0..640e9af 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -710,7 +710,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -743,7 +743,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index bb39dfc..ac7adf3 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -612,7 +612,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index 4b1c252..ccdc661 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -637,7 +637,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index fc66f01..0c42c89 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -641,7 +641,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index c035072..74dbdc6 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -700,7 +700,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -731,7 +731,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_TSC2101=y
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index 5bc8918..a4aab8e 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -681,7 +681,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index 55b2611..0cfe363 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -631,7 +631,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b77d054..aa9d34f 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -656,7 +656,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index b68e014..6b3b5c6 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -711,7 +711,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 418ca2f..f8701fa 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -698,7 +698,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index b2456ca..a8ee698 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -886,8 +886,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index 4920096..a57f9e4 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -858,8 +858,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -885,7 +885,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 6361922..08e1406 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -554,7 +554,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TSC2101 is not set
 # CONFIG_SPI_TSC2102 is not set
 # CONFIG_SPI_TSC210X is not set
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index 3245f8f..a0dc37c 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -527,8 +527,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -552,7 +552,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 17b9b24..05ad96a 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -606,7 +606,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig
index 6b798c2..41429a0 100644
--- a/arch/arm/configs/pcm038_defconfig
+++ b/arch/arm/configs/pcm038_defconfig
@@ -604,7 +604,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -626,7 +626,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 59e4463..9018f0f 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -744,7 +744,7 @@
 #
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 811b8f6..67b5f1e 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -915,7 +915,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 5cbd815..cd1d717 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -687,7 +687,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -714,7 +714,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index f62d181..a29d61f 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -590,7 +590,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 35faaea..65a583e 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -923,7 +923,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -950,7 +950,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index cf3c1b5..2e8fa50 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -465,8 +465,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 4df5b4d..745c68f 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -977,8 +977,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1003,7 +1003,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 853dcdd..25b007f 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -610,7 +610,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 9033d14..b6f8381 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -948,7 +948,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index fcb4aaa..fd77740 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -676,7 +676,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index b786e04..e7c19dd 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -668,7 +668,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 8355f88..b11c5da 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -611,7 +611,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index d01fecb..30f463d 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -860,8 +860,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig
index f891364..1039f366 100644
--- a/arch/arm/configs/xm_x2xx_defconfig
+++ b/arch/arm/configs/xm_x2xx_defconfig
@@ -1009,8 +1009,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index a9f41c2..9192e59 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -682,7 +682,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index fe182a8..867ead2 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -12,6 +12,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
@@ -76,29 +77,6 @@
 	.num_resources  = ARRAY_SIZE(usb_resources),
 };
 
-#ifdef CONFIG_USB_MUSB_OTG
-
-static struct otg_transceiver *xceiv;
-
-struct otg_transceiver *otg_get_transceiver(void)
-{
-	if (xceiv)
-		get_device(xceiv->dev);
-	return xceiv;
-}
-EXPORT_SYMBOL(otg_get_transceiver);
-
-int otg_set_transceiver(struct otg_transceiver *x)
-{
-	if (xceiv && x)
-		return -EBUSY;
-	xceiv = x;
-	return 0;
-}
-EXPORT_SYMBOL(otg_set_transceiver);
-
-#endif
-
 void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 {
 	usb_data.power = mA / 2;
diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-integrator/clock.h
+++ /dev/null
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index b240c5f..0d784a7 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,16 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio-switch.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
@@ -292,41 +290,6 @@
 	.id		= -1,
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(15),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name                   = "H2 TSC2101",
-	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, /* tsc2101_configure, */
-	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
-	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
-	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *h2_devices[] __initdata = {
 	&h2_nor_device,
 	&h2_nand_device,
@@ -334,7 +297,6 @@
 	&h2_irda_device,
 	&h2_kp_device,
 	&h2_lcd_device,
-	&h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -409,11 +371,6 @@
 
 #define H2_NAND_RB_GPIO_PIN	62
 
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
 static void __init h2_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 5157eea..bf08b6a 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -49,8 +49,6 @@
 #include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
@@ -387,41 +385,6 @@
 	},
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(15),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-	.pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name                   = "H3 TSC2101",
-	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, /* tsc2101_configure, */
-	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
-	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
-	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *devices[] __initdata = {
 	&nor_device,
 	&nand_device,
@@ -430,7 +393,6 @@
 	&h3_irda_device,
 	&h3_kp_device,
 	&h3_lcd_device,
-	&h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -472,18 +434,6 @@
 	},
 };
 
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
-	{
-		.name			= "mmc_slot",
-		.gpio                   = OMAP_MPUIO(1),
-		.type                   = OMAP_GPIO_SWITCH_TYPE_COVER,
-		.debounce_rising        = 100,
-		.debounce_falling       = 0,
-		.notify                 = h3_mmc_slot_cover_handler,
-		.notify_data            = NULL,
-	},
-};
-
 #define H3_NAND_RB_GPIO_PIN	10
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index af2fb90..071cd02 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -37,8 +37,6 @@
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/mmc.h>
 
 static int innovator_keymap[] = {
@@ -115,42 +113,6 @@
 	.resource	= &innovator_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "OMAP Innovator AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
- 	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct resource innovator_kp_resources[] = {
 	[0] = {
 		.start	= INT_KEYBOARD,
@@ -227,7 +189,6 @@
 static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator_flash_device,
 	&innovator1510_smc91x_device,
-	&innovator_mcbsp1_device,
 	&innovator_kp_device,
 	&innovator1510_lcd_device,
 	&innovator1510_spi_device,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 4970c40..af51e0b 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/dsp_common.h>
-#include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
@@ -261,6 +260,13 @@
  */
 static int audio_pwr_state = -1;
 
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
 /*
  * audio_pwr_up / down should be called under audio_pwr_lock
  */
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ff9e67b..1a16ecb 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -51,8 +51,6 @@
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -141,47 +139,10 @@
 	.resource	= osk5912_cf_resources,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1 = RINTM(3) | RRST,
-	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "OSK AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
 	&osk5912_flash_device,
 	&osk5912_smc91x_device,
 	&osk5912_cf_device,
-	&osk5912_mcbsp1_device,
 };
 
 static struct gpio_led tps_leds[] = {
@@ -259,8 +220,10 @@
 		.platform_data	= &tps_board,
 
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1B),
+	},
 	/* TODO when driver support is ready:
-	 *  - aic23 audio chip at 0x1a
 	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
 	 */
 };
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 75e32d3..99f2b43 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -42,8 +42,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
@@ -195,15 +193,6 @@
 	.pins[0]	= 2,
 };
 
-static struct omap_mmc_config palmte_mmc_config __initdata = {
-	.mmc[0]		= {
-		.enabled 	= 1,
-		.wp_pin		= PALMTE_MMC_WP_GPIO,
-		.power_pin	= PALMTE_MMC_POWER_GPIO,
-		.switch_pin	= PALMTE_MMC_SWITCH_GPIO,
-	},
-};
-
 static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -212,24 +201,6 @@
 	.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
-	.spcr2	= FRST | GRST | XRST | XINTM(3),
-	.xcr2	= XDATDLY(1) | XFIG,
-	.xcr1	= XWDLEN1(OMAP_MCBSP_WORD_32),
-	.pcr0	= SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
-	.name			= "TSC2102 audio",
-	.mcbsp_regs_alsa	= &palmte_mcbsp1_regs,
-	.codec_configure_dev	= NULL,	/* tsc2102_configure, */
-	.codec_set_samplerate	= NULL,	/* tsc2102_set_samplerate, */
-	.codec_clock_setup	= NULL,	/* tsc2102_clock_setup, */
-	.codec_clock_on		= NULL,	/* tsc2102_clock_on, */
-	.codec_clock_off	= NULL,	/* tsc2102_clock_off, */
-	.get_default_samplerate	= NULL,	/* tsc2102_get_default_samplerate, */
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 5c001af..1cbc127 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -30,7 +30,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/led.h>
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -40,7 +39,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -122,44 +120,6 @@
 	.resource	= &palmtt_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2		= FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1		= RINTM(3) | RRST,
-	.rcr2		= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-				RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1		= RFRLEN1(OMAP_MCBSP_WORD_8) |
-				RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2		= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-				XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1		= XFRLEN1(OMAP_MCBSP_WORD_8) |
-				XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1		= FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2		= GSYNC | CLKSP | FSGM |
-				FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	.pcr0		= CLKXP | CLKRP,	/* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "PalmTT AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, /* aic23_configure, */
-	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
-	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
-	.codec_clock_on		= NULL, /* aic23_clock_on, */
-	.codec_clock_off	= NULL, /* aic23_clock_off, */
-	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev	= {
-		.platform_data	= &alsa_config,
-	},
-};
-
 static struct resource palmtt_kp_resources[] = {
 	[0] = {
 		.start	= INT_KEYBOARD,
@@ -257,7 +217,6 @@
 
 static struct platform_device *palmtt_devices[] __initdata = {
 	&palmtt_flash_device,
-	&palmtt_mcbsp1_device,
 	&palmtt_kp_device,
 	&palmtt_lcd_device,
 	&palmtt_irda_device,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index cc05257..baf5efb 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -32,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -179,41 +178,6 @@
 	.id	= -1,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-	.spcr2	= FREE | FRST | GRST | XRST | XINTM(3),
-	.spcr1	= RINTM(3) | RRST,
-	.rcr2	= RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-			RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-	.rcr1	= RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-	.xcr2	= XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-			XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-	.xcr1	= XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-	.srgr1	= FWID(DEFAULT_BITPERSAMPLE - 1),
-	.srgr2	= GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-	.pcr0	= CLKXP | CLKRP,	/* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-	.name			= "PalmZ71 AIC23",
-	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL,	/* aic23_configure */
-	.codec_set_samplerate	= NULL,	/* aic23_set_samplerate */
-	.codec_clock_setup	= NULL,	/* aic23_clock_setup */
-	.codec_clock_on		= NULL,	/* aic23_clock_on */
-	.codec_clock_off	= NULL,	/* aic23_clock_off */
-	.get_default_samplerate	= NULL,	/* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data = &alsa_config,
-	},
-};
-
 static struct omap_backlight_config palmz71_backlight_config = {
 	.default_intensity	= 0xa0,
 };
@@ -229,7 +193,6 @@
 static struct platform_device *devices[] __initdata = {
 	&palmz71_rom_device,
 	&palmz71_kp_device,
-	&palmz71_mcbsp1_device,
 	&palmz71_lcd_device,
 	&palmz71_irda_device,
 	&palmz71_spi_device,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 8171fe0..28c76a1 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -34,13 +34,12 @@
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/tc.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/keypad.h>
 
 /* Write to I2C device */
@@ -254,35 +253,6 @@
 	.resource	= sx1_irda_resources,
 };
 
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
-	.spcr2	= XINTM(3),	/* SPCR2=30 */
-	.spcr1	= RINTM(3),	/* SPCR1=30 */
-	.rcr2	= 0,	/* RCR2 =00 */
-	.rcr1	= RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16),	/* RCR1=140 */
-	.xcr2	= 0,	/* XCR2 = 0 */
-	.xcr1	= XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16),	/* XCR1 = 140 */
-	.srgr1	= FWID(15) | CLKGDV(12),	/* SRGR1=0f0c */
-	.srgr2	= FSGM | FPER(31),	/* SRGR2=101f */
-	.pcr0	= FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-						/* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
-	.name			= "SX1 EGold",
-	.mcbsp_regs_alsa	= &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
-	.name	= "omap_alsa_mcbsp",
-	.id	= 1,
-	.dev = {
-		.platform_data	= &sx1_alsa_config,
-	},
-};
-
 /*----------- MTD -------------------------*/
 
 static struct mtd_partition sx1_partitions[] = {
@@ -394,7 +364,6 @@
 	&sx1_flash_device,
 	&sx1_kp_device,
 	&sx1_lcd_device,
-	&sx1_mcbsp1_device,
 	&sx1_irda_device,
 };
 /*-----------------------------------------*/
@@ -423,9 +392,9 @@
 
 	/* turn on USB power */
 	/* sx1_setusbpower(1); cant do it here because i2c is not ready */
-	omap_request_gpio(1);	/* A_IRDA_OFF */
-	omap_request_gpio(11);	/* A_SWITCH */
-	omap_request_gpio(15);	/* A_USB_ON */
+	gpio_request(1, "A_IRDA_OFF");
+	gpio_request(11, "A_SWITCH");
+	gpio_request(15, "A_USB_ON");
 	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
 	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
 	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index c224f3c..a765354 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,7 +22,6 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
-#include <linux/irq.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 4474da7..ca7a0cc 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index bf1e5d3..0a7b24ba 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -22,8 +22,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/onenand.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/err.h>
@@ -282,65 +280,16 @@
 {
 	/* LED0 - AA10 */
 	omap_cfg_reg(AA10_242X_GPIO13);
-	omap_request_gpio(LED0_GPIO13);
-	omap_set_gpio_direction(LED0_GPIO13, 0);
-	omap_set_gpio_dataout(LED0_GPIO13, 0);
+	gpio_request(LED0_GPIO13, "LED0");
+	gpio_direction_output(LED0_GPIO13, 0);
 	/* LED1  - AA6 */
 	omap_cfg_reg(AA6_242X_GPIO14);
-	omap_request_gpio(LED1_GPIO14);
-	omap_set_gpio_direction(LED1_GPIO14, 0);
-	omap_set_gpio_dataout(LED1_GPIO14, 0);
+	gpio_request(LED1_GPIO14, "LED1");
+	gpio_direction_output(LED1_GPIO14, 0);
 	/* LED2  - AA4 */
 	omap_cfg_reg(AA4_242X_GPIO15);
-	omap_request_gpio(LED2_GPIO15);
-	omap_set_gpio_direction(LED2_GPIO15, 0);
-	omap_set_gpio_dataout(LED2_GPIO15, 0);
-}
-
-static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
-{
-	static unsigned int led0, led1, led2;
-
-	if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
-		omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
-	else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
-		omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
-	else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
-		omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
-
-	return IRQ_HANDLED;
-}
-
-static void __init apollon_sw_init(void)
-{
-	/* Enter SW - Y11 */
-	omap_cfg_reg(Y11_242X_GPIO16);
-	omap_request_gpio(SW_ENTER_GPIO16);
-	gpio_direction_input(SW_ENTER_GPIO16);
-	/* Up SW - AA12 */
-	omap_cfg_reg(AA12_242X_GPIO17);
-	omap_request_gpio(SW_UP_GPIO17);
-	gpio_direction_input(SW_UP_GPIO17);
-	/* Down SW - AA8 */
-	omap_cfg_reg(AA8_242X_GPIO58);
-	omap_request_gpio(SW_DOWN_GPIO58);
-	gpio_direction_input(SW_DOWN_GPIO58);
-
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
-				IRQF_SHARED, "enter sw",
-				&apollon_sw_interrupt))
-		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
-				IRQF_SHARED, "up sw",
-				&apollon_sw_interrupt))
-		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
-	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
-				IRQF_SHARED, "down sw",
-				&apollon_sw_interrupt))
-		return;
+	gpio_request(LED2_GPIO15, "LED2");
+	gpio_direction_output(LED2_GPIO15, 0);
 }
 
 static void __init apollon_usb_init(void)
@@ -357,7 +306,6 @@
 	u32 v;
 
 	apollon_led_init();
-	apollon_sw_init();
 	apollon_flash_init();
 	apollon_usb_init();
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index aa69727..f6a1345 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -88,7 +88,7 @@
 
 	ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
-	if (omap_request_gpio(eth_gpio) < 0) {
+	if (gpio_request(eth_gpio, "smc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
 				eth_gpio);
 		return;
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 9e5ada0..38c88fb 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -28,6 +28,8 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/i2c/twl4030.h>
+
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -120,6 +122,9 @@
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	omap_cfg_reg(AH8_34XX_GPIO29);
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
 
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
@@ -304,10 +309,6 @@
 	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
 	omap_serial_init();
 
-	omap_cfg_reg(AH8_34XX_GPIO29);
-	mmc[0].gpio_cd = gpio + 0;
-	twl4030_mmc_init(mmc);
-
 	omap_cfg_reg(J25_34XX_GPIO170);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index acdc709..e20023c 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
 #include <mach/mux.h>
diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c
index bdb5fd9..1601698 100644
--- a/arch/arm/mm/copypage-v4mc.c
+++ b/arch/arm/mm/copypage-v4mc.c
@@ -68,7 +68,7 @@
 	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
 }
 
-void v4_mc_copy_user_highpage(struct page *from, struct page *to,
+void v4_mc_copy_user_highpage(struct page *to, struct page *from,
 	unsigned long vaddr)
 {
 	void *kto = kmap_atomic(to, KM_USER1);
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 18373f7..9f88dd3 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -138,7 +138,7 @@
  */
 static void unmap_area_sections(unsigned long virt, unsigned long size)
 {
-	unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
 	pgd_t *pgd;
 
 	flush_cache_vunmap(addr, end);
@@ -337,10 +337,7 @@
 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
 #ifndef CONFIG_SMP
 	struct vm_struct **p, *tmp;
-#endif
-	unsigned int section_mapping = 0;
 
-#ifndef CONFIG_SMP
 	/*
 	 * If this is a section based mapping we need to handle it
 	 * specially as the VM subsystem does not know how to handle
@@ -352,11 +349,8 @@
 	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
 		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
 			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
-				*p = tmp->next;
 				unmap_area_sections((unsigned long)tmp->addr,
 						    tmp->size);
-				kfree(tmp);
-				section_mapping = 1;
 			}
 			break;
 		}
@@ -364,7 +358,6 @@
 	write_unlock(&vmlist_lock);
 #endif
 
-	if (!section_mapping)
-		vunmap(addr);
+	vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);
diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h
new file mode 100644
index 0000000..a9221f1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ipu.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_H_
+#define _IPU_H_
+
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+	IDMAC_IC_0 = 0,		/* IC (encoding task) to memory */
+	IDMAC_IC_1 = 1,		/* IC (viewfinder task) to memory */
+	IDMAC_ADC_0 = 1,
+	IDMAC_IC_2 = 2,
+	IDMAC_ADC_1 = 2,
+	IDMAC_IC_3 = 3,
+	IDMAC_IC_4 = 4,
+	IDMAC_IC_5 = 5,
+	IDMAC_IC_6 = 6,
+	IDMAC_IC_7 = 7,		/* IC (sensor data) to memory */
+	IDMAC_IC_8 = 8,
+	IDMAC_IC_9 = 9,
+	IDMAC_IC_10 = 10,
+	IDMAC_IC_11 = 11,
+	IDMAC_IC_12 = 12,
+	IDMAC_IC_13 = 13,
+	IDMAC_SDC_0 = 14,	/* Background synchronous display data */
+	IDMAC_SDC_1 = 15,	/* Foreground data (overlay) */
+	IDMAC_SDC_2 = 16,
+	IDMAC_SDC_3 = 17,
+	IDMAC_ADC_2 = 18,
+	IDMAC_ADC_3 = 19,
+	IDMAC_ADC_4 = 20,
+	IDMAC_ADC_5 = 21,
+	IDMAC_ADC_6 = 22,
+	IDMAC_ADC_7 = 23,
+	IDMAC_PF_0 = 24,
+	IDMAC_PF_1 = 25,
+	IDMAC_PF_2 = 26,
+	IDMAC_PF_3 = 27,
+	IDMAC_PF_4 = 28,
+	IDMAC_PF_5 = 29,
+	IDMAC_PF_6 = 30,
+	IDMAC_PF_7 = 31,
+};
+
+/* Order significant! */
+enum ipu_channel_status {
+	IPU_CHANNEL_FREE,
+	IPU_CHANNEL_INITIALIZED,
+	IPU_CHANNEL_READY,
+	IPU_CHANNEL_ENABLED,
+};
+
+#define IPU_CHANNELS_NUM 32
+
+enum pixel_fmt {
+	/* 1 byte */
+	IPU_PIX_FMT_GENERIC,
+	IPU_PIX_FMT_RGB332,
+	IPU_PIX_FMT_YUV420P,
+	IPU_PIX_FMT_YUV422P,
+	IPU_PIX_FMT_YUV420P2,
+	IPU_PIX_FMT_YVU422P,
+	/* 2 bytes */
+	IPU_PIX_FMT_RGB565,
+	IPU_PIX_FMT_RGB666,
+	IPU_PIX_FMT_BGR666,
+	IPU_PIX_FMT_YUYV,
+	IPU_PIX_FMT_UYVY,
+	/* 3 bytes */
+	IPU_PIX_FMT_RGB24,
+	IPU_PIX_FMT_BGR24,
+	/* 4 bytes */
+	IPU_PIX_FMT_GENERIC_32,
+	IPU_PIX_FMT_RGB32,
+	IPU_PIX_FMT_BGR32,
+	IPU_PIX_FMT_ABGR32,
+	IPU_PIX_FMT_BGRA32,
+	IPU_PIX_FMT_RGBA32,
+};
+
+enum ipu_color_space {
+	IPU_COLORSPACE_RGB,
+	IPU_COLORSPACE_YCBCR,
+	IPU_COLORSPACE_YUV
+};
+
+/*
+ * Enumeration of IPU rotation modes
+ */
+enum ipu_rotate_mode {
+	/* Note the enum values correspond to BAM value */
+	IPU_ROTATE_NONE = 0,
+	IPU_ROTATE_VERT_FLIP = 1,
+	IPU_ROTATE_HORIZ_FLIP = 2,
+	IPU_ROTATE_180 = 3,
+	IPU_ROTATE_90_RIGHT = 4,
+	IPU_ROTATE_90_RIGHT_VFLIP = 5,
+	IPU_ROTATE_90_RIGHT_HFLIP = 6,
+	IPU_ROTATE_90_LEFT = 7,
+};
+
+struct ipu_platform_data {
+	unsigned int	irq_base;
+};
+
+/*
+ * Enumeration of DI ports for ADC.
+ */
+enum display_port {
+	DISP0,
+	DISP1,
+	DISP2,
+	DISP3
+};
+
+struct idmac_video_param {
+	unsigned short		in_width;
+	unsigned short		in_height;
+	uint32_t		in_pixel_fmt;
+	unsigned short		out_width;
+	unsigned short		out_height;
+	uint32_t		out_pixel_fmt;
+	unsigned short		out_stride;
+	bool			graphics_combine_en;
+	bool			global_alpha_en;
+	bool			key_color_en;
+	enum display_port	disp;
+	unsigned short		out_left;
+	unsigned short		out_top;
+};
+
+/*
+ * Union of initialization parameters for a logical channel. So far only video
+ * parameters are used.
+ */
+union ipu_channel_param {
+	struct idmac_video_param video;
+};
+
+struct idmac_tx_desc {
+	struct dma_async_tx_descriptor	txd;
+	struct scatterlist		*sg;	/* scatterlist for this */
+	unsigned int			sg_len;	/* tx-descriptor. */
+	struct list_head		list;
+};
+
+struct idmac_channel {
+	struct dma_chan		dma_chan;
+	dma_cookie_t		completed;	/* last completed cookie	   */
+	union ipu_channel_param	params;
+	enum ipu_channel	link;	/* input channel, linked to the output	   */
+	enum ipu_channel_status	status;
+	void			*client;	/* Only one client per channel	   */
+	unsigned int		n_tx_desc;
+	struct idmac_tx_desc	*desc;		/* allocated tx-descriptors	   */
+	struct scatterlist	*sg[2];	/* scatterlist elements in buffer-0 and -1 */
+	struct list_head	free_list;	/* free tx-descriptors		   */
+	struct list_head	queue;		/* queued tx-descriptors	   */
+	spinlock_t		lock;		/* protects sg[0,1], queue	   */
+	struct mutex		chan_mutex; /* protects status, cookie, free_list  */
+	bool			sec_chan_en;
+	int			active_buffer;
+	unsigned int		eof_irq;
+	char			eof_name[16];	/* EOF IRQ name for request_irq()  */
+};
+
+#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd)
+#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index e06d3cb..c02b8fc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -35,7 +35,15 @@
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
 #define MXC_BOARD_IRQS	16
 
-#define NR_IRQS		(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+#define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
+
+#ifdef CONFIG_MX3_IPU_IRQS
+#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS
+#else
+#define MX3_IPU_IRQS 0
+#endif
+
+#define NR_IRQS			(MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
new file mode 100644
index 0000000..e391a76
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx3fb.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH    0x80000000
+#define FB_SYNC_CLK_INVERT     0x40000000
+#define FB_SYNC_DATA_INVERT    0x20000000
+#define FB_SYNC_CLK_IDLE_EN    0x10000000
+#define FB_SYNC_SHARP_MODE     0x08000000
+#define FB_SYNC_SWAP_RGB       0x04000000
+#define FB_SYNC_CLK_SEL_EN     0x02000000
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:   pointer to the dma-device, used for dma-slave connection
+ * @mode:      pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+       struct device                   *dma_dev;
+       const char                      *name;
+       const struct fb_videomode       *mode;
+       int                             num_modes;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 692d2b4..e77373c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -278,14 +278,11 @@
 		u32 val;
 
 		val = dma_read(CCR(lch));
-		val &= ~(3 << 19);
-		if (dma_trigger > 63)
-			val |= 1 << 20;
-		if (dma_trigger > 31)
-			val |= 1 << 19;
 
-		val &= ~(0x1f);
-		val |= (dma_trigger & 0x1f);
+		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+		val &= ~((3 << 19) | 0x1f);
+		val |= (dma_trigger & ~0x1f) << 14;
+		val |= dma_trigger & 0x1f;
 
 		if (sync_mode & OMAP_DMA_SYNC_FRAME)
 			val |= 1 << 5;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 07b6968..f856a90 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1789,6 +1789,8 @@
 /* FIXME for at least omap2, show pullup/pulldown state */
 
 			irqstat = irq_desc[irq].status;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) ||	\
+		defined(CONFIG_ARCH_OMAP34XX)
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
 				char	*trigger = NULL;
@@ -1818,6 +1820,7 @@
 						(bank->suspend_wakeup & mask)
 							? " wakeup" : "");
 			}
+#endif
 			seq_printf(s, "\n");
 		}
 
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
deleted file mode 100644
index 5ccedac..0000000
--- a/arch/arm/plat-omap/include/mach/aic23.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR		0x00
-#define RIGHT_LINE_VOLUME_ADDR		0x01
-#define LEFT_CHANNEL_VOLUME_ADDR	0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
-#define ANALOG_AUDIO_CONTROL_ADDR	0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
-#define POWER_DOWN_CONTROL_ADDR		0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
-#define SAMPLE_RATE_CONTROL_ADDR	0x08
-#define DIGITAL_INTERFACE_ACT_ADDR	0x09
-#define RESET_CONTROL_ADDR		0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED			0x0100
-#define LIM_MUTED			0x0080
-#define LIV_DEFAULT			0x0017
-#define LIV_MAX				0x001f
-#define LIV_MIN				0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON				0x0080
-#define LHV_DEFAULT			0x0079
-#define LHV_MAX				0x007f
-#define LHV_MIN				0x0000
-
-// Analog audio path control register
-#define STA_REG(x)			((x)<<6)
-#define STE_ENABLED			0x0020
-#define DAC_SELECTED			0x0010
-#define BYPASS_ON			0x0008
-#define INSEL_MIC			0x0004
-#define MICM_MUTED			0x0002
-#define MICB_20DB			0x0001
-
-// Digital audio path control register
-#define DACM_MUTE			0x0008
-#define DEEMP_32K			0x0002
-#define DEEMP_44K			0x0004
-#define DEEMP_48K			0x0006
-#define ADCHP_ON			0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF	  	0x0080
-#define CLK_OFF				0x0040
-#define OSC_OFF				0x0020
-#define OUT_OFF				0x0010
-#define DAC_OFF				0x0008
-#define ADC_OFF				0x0004
-#define MIC_OFF				0x0002
-#define LINE_OFF			0x0001
-
-// Digital audio interface register
-#define MS_MASTER			0x0040
-#define LRSWAP_ON			0x0020
-#define LRP_ON				0x0010
-#define IWL_16				0x0000
-#define IWL_20				0x0004
-#define IWL_24				0x0008
-#define IWL_32				0x000C
-#define FOR_I2S				0x0002
-#define FOR_DSP				0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF			0x0080
-#define CLKIN_HALF			0x0040
-#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON			0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON				0x0001
-
-#define TLV320AIC23ID1                  (0x1a)	// cs low
-#define TLV320AIC23ID2                  (0x1b)	// cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
index 14909dc..1888326 100644
--- a/arch/arm/plat-omap/include/mach/board-h3.h
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -30,7 +30,9 @@
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
 #define OMAP1710_ETHR_START		0x04000300
 
+#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
+
 extern void h3_mmc_init(void);
-extern void h3_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 04e68e8..8d9dfe3 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -87,16 +87,6 @@
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-static inline int omap_request_gpio(int gpio)
-{
-	return gpio_request(gpio, "FIXME");
-}
-
-static inline void omap_free_gpio(int gpio)
-{
-	gpio_free(gpio);
-}
-
 static inline int gpio_get_value(unsigned gpio)
 {
 	return __gpio_get_value(gpio);
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 6a0d1a0..eef873d 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -87,6 +87,10 @@
 #define OMAP_MCBSP_REG_XCERG	0x3A
 #define OMAP_MCBSP_REG_XCERH	0x3C
 
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR	0x00
+#define OMAP_MCBSP_REG_RCCR	0x00
+
 #define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
 #define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
 
@@ -231,11 +235,16 @@
 #define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
 
 /*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE		0x8000
+#define PPCONNECT		0x4000
+#define DXENDLY(value)		((value)<<12)	/* Bits 12:13 */
+#define XFULL_CYCLE		0x0800
 #define DILB			0x0020
 #define XDMAEN			0x0008
 #define XDISABLE		0x0001
 
 /********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE		0x0800
 #define RDMAEN			0x0008
 #define RDISABLE		0x0001
 
@@ -267,6 +276,8 @@
 	u16 rcerh;
 	u16 xcerg;
 	u16 xcerh;
+	u16 xccr;
+	u16 rccr;
 };
 
 typedef enum {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index af33fc7..f2401a8 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -173,6 +173,10 @@
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
+		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index add0485..e278de6 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -431,15 +431,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-#if	defined(CONFIG_USB_GADGET_OMAP) || \
-	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
-	(defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
-static void usb_release(struct device *dev)
-{
-	/* normally not freed */
-}
-#endif
-
 #ifdef	CONFIG_USB_GADGET_OMAP
 
 static struct resource udc_resources[] = {
@@ -466,7 +457,6 @@
 	.name		= "omap_udc",
 	.id		= -1,
 	.dev = {
-		.release		= usb_release,
 		.dma_mask		= &udc_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
 	},
@@ -497,7 +487,6 @@
 	.name			= "ohci",
 	.id			= -1,
 	.dev = {
-		.release		= usb_release,
 		.dma_mask		= &ohci_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
 	},
@@ -524,9 +513,6 @@
 static struct platform_device otg_device = {
 	.name		= "omap_otg",
 	.id		= -1,
-	.dev = {
-		.release		= usb_release,
-	},
 	.num_resources	= ARRAY_SIZE(otg_resources),
 	.resource	= otg_resources,
 };
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 164e281..574aca9 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -644,8 +644,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -670,7 +670,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig
index b0572d2..86a45b5 100644
--- a/arch/avr32/configs/atngw100_evklcd100_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd100_defconfig
@@ -671,7 +671,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig
index c5b898d..a96b68e 100644
--- a/arch/avr32/configs/atngw100_evklcd101_defconfig
+++ b/arch/avr32/configs/atngw100_evklcd101_defconfig
@@ -671,7 +671,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -699,7 +699,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index c9dc648..0abe90a 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -663,8 +663,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -689,7 +689,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 29ea132..101972f 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -611,8 +611,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -637,7 +637,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 69e6c0d..518f789 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -394,7 +394,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig
index 361c31c..c1603c4 100644
--- a/arch/avr32/configs/atstk1006_defconfig
+++ b/arch/avr32/configs/atstk1006_defconfig
@@ -684,8 +684,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -710,7 +710,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index e2bd998..4c3ac06 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -633,8 +633,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -659,7 +659,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig
index 0d3d298..3970fcc 100644
--- a/arch/avr32/configs/hammerhead_defconfig
+++ b/arch/avr32/configs/hammerhead_defconfig
@@ -716,8 +716,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig
index 981e4f8..1a58ffb 100644
--- a/arch/avr32/configs/mimc200_defconfig
+++ b/arch/avr32/configs/mimc200_defconfig
@@ -565,8 +565,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -592,7 +592,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index e0b3f24..defb978 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -746,9 +746,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 69f66c3..992424f 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -793,9 +793,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -820,7 +820,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index f92668a..21e3c1a 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -837,9 +837,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -864,7 +864,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 92afd98..0bdf20a 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -719,7 +719,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 49eabb4..2f747d6 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -743,9 +743,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -770,7 +770,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 332142f..8b0a812 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -794,9 +794,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 CONFIG_SENSORS_AD5252=m
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -821,7 +821,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index ed15934..a1f766b 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -796,9 +796,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -823,7 +823,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index d4ed9ce..cd2da6b 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -928,9 +928,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -955,7 +955,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 1ecb7a3..b398ca2 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -756,7 +756,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 9683b2e..3a20e28 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -691,7 +691,7 @@
 #
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -713,7 +713,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index a041e7e..9514694 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -715,7 +715,7 @@
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -742,7 +742,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efd68bc..efe9741 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -798,7 +798,7 @@
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 5d3901d..bd553da 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -750,7 +750,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 CONFIG_SPI_SPIDEV=y
 
 #
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index e66f5da..eae83b5 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -803,7 +803,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ce5dde9d..ad09670 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -755,9 +755,9 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
+# CONFIG_EEPROM_AT24 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -781,7 +781,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 7c8250d..fa580af 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -798,7 +798,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
 # CONFIG_SENSORS_PCA9543 is not set
@@ -826,7 +826,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=m
+CONFIG_EEPROM_AT25=m
 # CONFIG_SPI_SPIDEV is not set
 
 #
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 9af522c..97a1f1d 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -533,7 +533,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index 6dd8655..ace4109 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -752,7 +752,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 0a06b13..514f063 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -841,7 +841,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/m32r/configs/m32104ut_defconfig b/arch/m32r/configs/m32104ut_defconfig
index 9b5af6c..6f54b00 100644
--- a/arch/m32r/configs/m32104ut_defconfig
+++ b/arch/m32r/configs/m32104ut_defconfig
@@ -621,7 +621,7 @@
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/include/asm-m68k/Kbuild b/arch/m68k/include/asm/Kbuild
similarity index 100%
rename from include/asm-m68k/Kbuild
rename to arch/m68k/include/asm/Kbuild
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68328.h
rename to arch/m68k/include/asm/MC68328.h
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68332.h
rename to arch/m68k/include/asm/MC68332.h
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68EZ328.h
rename to arch/m68k/include/asm/MC68EZ328.h
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
similarity index 100%
rename from arch/m68knommu/include/asm/MC68VZ328.h
rename to arch/m68k/include/asm/MC68VZ328.h
diff --git a/include/asm-m68k/a.out-core.h b/arch/m68k/include/asm/a.out-core.h
similarity index 100%
rename from include/asm-m68k/a.out-core.h
rename to arch/m68k/include/asm/a.out-core.h
diff --git a/include/asm-m68k/a.out.h b/arch/m68k/include/asm/a.out.h
similarity index 100%
rename from include/asm-m68k/a.out.h
rename to arch/m68k/include/asm/a.out.h
diff --git a/include/asm-m68k/adb_iop.h b/arch/m68k/include/asm/adb_iop.h
similarity index 100%
rename from include/asm-m68k/adb_iop.h
rename to arch/m68k/include/asm/adb_iop.h
diff --git a/include/asm-m68k/amigahw.h b/arch/m68k/include/asm/amigahw.h
similarity index 100%
rename from include/asm-m68k/amigahw.h
rename to arch/m68k/include/asm/amigahw.h
diff --git a/include/asm-m68k/amigaints.h b/arch/m68k/include/asm/amigaints.h
similarity index 100%
rename from include/asm-m68k/amigaints.h
rename to arch/m68k/include/asm/amigaints.h
diff --git a/include/asm-m68k/amigayle.h b/arch/m68k/include/asm/amigayle.h
similarity index 100%
rename from include/asm-m68k/amigayle.h
rename to arch/m68k/include/asm/amigayle.h
diff --git a/include/asm-m68k/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h
similarity index 100%
rename from include/asm-m68k/amipcmcia.h
rename to arch/m68k/include/asm/amipcmcia.h
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
similarity index 100%
rename from arch/m68knommu/include/asm/anchor.h
rename to arch/m68k/include/asm/anchor.h
diff --git a/include/asm-m68k/apollodma.h b/arch/m68k/include/asm/apollodma.h
similarity index 100%
rename from include/asm-m68k/apollodma.h
rename to arch/m68k/include/asm/apollodma.h
diff --git a/include/asm-m68k/apollohw.h b/arch/m68k/include/asm/apollohw.h
similarity index 100%
rename from include/asm-m68k/apollohw.h
rename to arch/m68k/include/asm/apollohw.h
diff --git a/include/asm-m68k/atafd.h b/arch/m68k/include/asm/atafd.h
similarity index 100%
rename from include/asm-m68k/atafd.h
rename to arch/m68k/include/asm/atafd.h
diff --git a/include/asm-m68k/atafdreg.h b/arch/m68k/include/asm/atafdreg.h
similarity index 100%
rename from include/asm-m68k/atafdreg.h
rename to arch/m68k/include/asm/atafdreg.h
diff --git a/include/asm-m68k/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h
similarity index 100%
rename from include/asm-m68k/atari_joystick.h
rename to arch/m68k/include/asm/atari_joystick.h
diff --git a/include/asm-m68k/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h
similarity index 100%
rename from include/asm-m68k/atari_stdma.h
rename to arch/m68k/include/asm/atari_stdma.h
diff --git a/include/asm-m68k/atari_stram.h b/arch/m68k/include/asm/atari_stram.h
similarity index 100%
rename from include/asm-m68k/atari_stram.h
rename to arch/m68k/include/asm/atari_stram.h
diff --git a/include/asm-m68k/atarihw.h b/arch/m68k/include/asm/atarihw.h
similarity index 100%
rename from include/asm-m68k/atarihw.h
rename to arch/m68k/include/asm/atarihw.h
diff --git a/include/asm-m68k/atariints.h b/arch/m68k/include/asm/atariints.h
similarity index 100%
rename from include/asm-m68k/atariints.h
rename to arch/m68k/include/asm/atariints.h
diff --git a/include/asm-m68k/atarikb.h b/arch/m68k/include/asm/atarikb.h
similarity index 100%
rename from include/asm-m68k/atarikb.h
rename to arch/m68k/include/asm/atarikb.h
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
new file mode 100644
index 0000000..8d29145
--- /dev/null
+++ b/arch/m68k/include/asm/atomic.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "atomic_no.h"
+#else
+#include "atomic_mm.h"
+#endif
diff --git a/include/asm-m68k/atomic.h b/arch/m68k/include/asm/atomic_mm.h
similarity index 100%
rename from include/asm-m68k/atomic.h
rename to arch/m68k/include/asm/atomic_mm.h
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68k/include/asm/atomic_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/atomic.h
rename to arch/m68k/include/asm/atomic_no.h
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h
similarity index 100%
rename from arch/m68knommu/include/asm/auxvec.h
rename to arch/m68k/include/asm/auxvec.h
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
new file mode 100644
index 0000000..ce163ab
--- /dev/null
+++ b/arch/m68k/include/asm/bitops.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bitops_no.h"
+#else
+#include "bitops_mm.h"
+#endif
diff --git a/include/asm-m68k/bitops.h b/arch/m68k/include/asm/bitops_mm.h
similarity index 100%
rename from include/asm-m68k/bitops.h
rename to arch/m68k/include/asm/bitops_mm.h
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68k/include/asm/bitops_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bitops.h
rename to arch/m68k/include/asm/bitops_no.h
diff --git a/include/asm-m68k/blinken.h b/arch/m68k/include/asm/blinken.h
similarity index 100%
rename from include/asm-m68k/blinken.h
rename to arch/m68k/include/asm/blinken.h
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
new file mode 100644
index 0000000..fedf3e3
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bootinfo_no.h"
+#else
+#include "bootinfo_mm.h"
+#endif
diff --git a/include/asm-m68k/bootinfo.h b/arch/m68k/include/asm/bootinfo_mm.h
similarity index 100%
rename from include/asm-m68k/bootinfo.h
rename to arch/m68k/include/asm/bootinfo_mm.h
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bootinfo.h
rename to arch/m68k/include/asm/bootinfo_no.h
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h
similarity index 100%
rename from arch/m68knommu/include/asm/bootstd.h
rename to arch/m68k/include/asm/bootstd.h
diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h
new file mode 100644
index 0000000..997e094
--- /dev/null
+++ b/arch/m68k/include/asm/bug.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bug_no.h"
+#else
+#include "bug_mm.h"
+#endif
diff --git a/include/asm-m68k/bug.h b/arch/m68k/include/asm/bug_mm.h
similarity index 100%
rename from include/asm-m68k/bug.h
rename to arch/m68k/include/asm/bug_mm.h
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68k/include/asm/bug_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bug.h
rename to arch/m68k/include/asm/bug_no.h
diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h
new file mode 100644
index 0000000..01f047d
--- /dev/null
+++ b/arch/m68k/include/asm/bugs.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bugs_no.h"
+#else
+#include "bugs_mm.h"
+#endif
diff --git a/include/asm-m68k/bugs.h b/arch/m68k/include/asm/bugs_mm.h
similarity index 100%
rename from include/asm-m68k/bugs.h
rename to arch/m68k/include/asm/bugs_mm.h
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68k/include/asm/bugs_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/bugs.h
rename to arch/m68k/include/asm/bugs_no.h
diff --git a/include/asm-m68k/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h
similarity index 100%
rename from include/asm-m68k/bvme6000hw.h
rename to arch/m68k/include/asm/bvme6000hw.h
diff --git a/include/asm-m68k/byteorder.h b/arch/m68k/include/asm/byteorder.h
similarity index 100%
rename from include/asm-m68k/byteorder.h
rename to arch/m68k/include/asm/byteorder.h
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
new file mode 100644
index 0000000..599c29b
--- /dev/null
+++ b/arch/m68k/include/asm/cache.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cache_no.h"
+#else
+#include "cache_mm.h"
+#endif
diff --git a/include/asm-m68k/cache.h b/arch/m68k/include/asm/cache_mm.h
similarity index 100%
rename from include/asm-m68k/cache.h
rename to arch/m68k/include/asm/cache_mm.h
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68k/include/asm/cache_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/cache.h
rename to arch/m68k/include/asm/cache_no.h
diff --git a/include/asm-m68k/cachectl.h b/arch/m68k/include/asm/cachectl.h
similarity index 100%
rename from include/asm-m68k/cachectl.h
rename to arch/m68k/include/asm/cachectl.h
diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h
new file mode 100644
index 0000000..a70d7319
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cacheflush_no.h"
+#else
+#include "cacheflush_mm.h"
+#endif
diff --git a/include/asm-m68k/cacheflush.h b/arch/m68k/include/asm/cacheflush_mm.h
similarity index 100%
rename from include/asm-m68k/cacheflush.h
rename to arch/m68k/include/asm/cacheflush_mm.h
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/cacheflush.h
rename to arch/m68k/include/asm/cacheflush_no.h
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
new file mode 100644
index 0000000..1cf5447
--- /dev/null
+++ b/arch/m68k/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "checksum_no.h"
+#else
+#include "checksum_mm.h"
+#endif
diff --git a/include/asm-m68k/checksum.h b/arch/m68k/include/asm/checksum_mm.h
similarity index 100%
rename from include/asm-m68k/checksum.h
rename to arch/m68k/include/asm/checksum_mm.h
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68k/include/asm/checksum_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/checksum.h
rename to arch/m68k/include/asm/checksum_no.h
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
similarity index 100%
rename from arch/m68knommu/include/asm/coldfire.h
rename to arch/m68k/include/asm/coldfire.h
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
similarity index 100%
rename from arch/m68knommu/include/asm/commproc.h
rename to arch/m68k/include/asm/commproc.h
diff --git a/include/asm-m68k/contregs.h b/arch/m68k/include/asm/contregs.h
similarity index 100%
rename from include/asm-m68k/contregs.h
rename to arch/m68k/include/asm/contregs.h
diff --git a/include/asm-m68k/cputime.h b/arch/m68k/include/asm/cputime.h
similarity index 100%
rename from include/asm-m68k/cputime.h
rename to arch/m68k/include/asm/cputime.h
diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h
new file mode 100644
index 0000000..51b056d
--- /dev/null
+++ b/arch/m68k/include/asm/current.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "current_no.h"
+#else
+#include "current_mm.h"
+#endif
diff --git a/include/asm-m68k/current.h b/arch/m68k/include/asm/current_mm.h
similarity index 100%
rename from include/asm-m68k/current.h
rename to arch/m68k/include/asm/current_mm.h
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68k/include/asm/current_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/current.h
rename to arch/m68k/include/asm/current_no.h
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h
similarity index 100%
rename from arch/m68knommu/include/asm/dbg.h
rename to arch/m68k/include/asm/dbg.h
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
new file mode 100644
index 0000000..d2598e3
--- /dev/null
+++ b/arch/m68k/include/asm/delay.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "delay_no.h"
+#else
+#include "delay_mm.h"
+#endif
diff --git a/include/asm-m68k/delay.h b/arch/m68k/include/asm/delay_mm.h
similarity index 100%
rename from include/asm-m68k/delay.h
rename to arch/m68k/include/asm/delay_mm.h
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68k/include/asm/delay_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/delay.h
rename to arch/m68k/include/asm/delay_no.h
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68k/include/asm/device.h
similarity index 100%
rename from arch/m68knommu/include/asm/device.h
rename to arch/m68k/include/asm/device.h
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
new file mode 100644
index 0000000..d211d9f5
--- /dev/null
+++ b/arch/m68k/include/asm/div64.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "div64_no.h"
+#else
+#include "div64_mm.h"
+#endif
diff --git a/include/asm-m68k/div64.h b/arch/m68k/include/asm/div64_mm.h
similarity index 100%
rename from include/asm-m68k/div64.h
rename to arch/m68k/include/asm/div64_mm.h
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68k/include/asm/div64_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/div64.h
rename to arch/m68k/include/asm/div64_no.h
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
new file mode 100644
index 0000000..f4a4c76
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma-mapping_no.h"
+#else
+#include "dma-mapping_mm.h"
+#endif
diff --git a/include/asm-m68k/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_mm.h
similarity index 100%
rename from include/asm-m68k/dma-mapping.h
rename to arch/m68k/include/asm/dma-mapping_mm.h
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/dma-mapping.h
rename to arch/m68k/include/asm/dma-mapping_no.h
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
new file mode 100644
index 0000000..b82e660
--- /dev/null
+++ b/arch/m68k/include/asm/dma.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma_no.h"
+#else
+#include "dma_mm.h"
+#endif
diff --git a/include/asm-m68k/dma.h b/arch/m68k/include/asm/dma_mm.h
similarity index 100%
rename from include/asm-m68k/dma.h
rename to arch/m68k/include/asm/dma_mm.h
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68k/include/asm/dma_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/dma.h
rename to arch/m68k/include/asm/dma_no.h
diff --git a/include/asm-m68k/dsp56k.h b/arch/m68k/include/asm/dsp56k.h
similarity index 100%
rename from include/asm-m68k/dsp56k.h
rename to arch/m68k/include/asm/dsp56k.h
diff --git a/include/asm-m68k/dvma.h b/arch/m68k/include/asm/dvma.h
similarity index 100%
rename from include/asm-m68k/dvma.h
rename to arch/m68k/include/asm/dvma.h
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
new file mode 100644
index 0000000..04ce488
--- /dev/null
+++ b/arch/m68k/include/asm/elf.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "elf_no.h"
+#else
+#include "elf_mm.h"
+#endif
diff --git a/include/asm-m68k/elf.h b/arch/m68k/include/asm/elf_mm.h
similarity index 100%
rename from include/asm-m68k/elf.h
rename to arch/m68k/include/asm/elf_mm.h
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68k/include/asm/elf_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/elf.h
rename to arch/m68k/include/asm/elf_no.h
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68k/include/asm/elia.h
similarity index 100%
rename from arch/m68knommu/include/asm/elia.h
rename to arch/m68k/include/asm/elia.h
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
similarity index 100%
rename from arch/m68knommu/include/asm/emergency-restart.h
rename to arch/m68k/include/asm/emergency-restart.h
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
new file mode 100644
index 0000000..876eec6
--- /dev/null
+++ b/arch/m68k/include/asm/entry.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "entry_no.h"
+#else
+#include "entry_mm.h"
+#endif
diff --git a/include/asm-m68k/entry.h b/arch/m68k/include/asm/entry_mm.h
similarity index 100%
rename from include/asm-m68k/entry.h
rename to arch/m68k/include/asm/entry_mm.h
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68k/include/asm/entry_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/entry.h
rename to arch/m68k/include/asm/entry_no.h
diff --git a/include/asm-m68k/errno.h b/arch/m68k/include/asm/errno.h
similarity index 100%
rename from include/asm-m68k/errno.h
rename to arch/m68k/include/asm/errno.h
diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h
new file mode 100644
index 0000000..97bcaef
--- /dev/null
+++ b/arch/m68k/include/asm/fb.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fb_no.h"
+#else
+#include "fb_mm.h"
+#endif
diff --git a/include/asm-m68k/fb.h b/arch/m68k/include/asm/fb_mm.h
similarity index 100%
rename from include/asm-m68k/fb.h
rename to arch/m68k/include/asm/fb_mm.h
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68k/include/asm/fb_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/fb.h
rename to arch/m68k/include/asm/fb_no.h
diff --git a/include/asm-m68k/fbio.h b/arch/m68k/include/asm/fbio.h
similarity index 100%
rename from include/asm-m68k/fbio.h
rename to arch/m68k/include/asm/fbio.h
diff --git a/include/asm-m68k/fcntl.h b/arch/m68k/include/asm/fcntl.h
similarity index 100%
rename from include/asm-m68k/fcntl.h
rename to arch/m68k/include/asm/fcntl.h
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68k/include/asm/flat.h
similarity index 100%
rename from arch/m68knommu/include/asm/flat.h
rename to arch/m68k/include/asm/flat.h
diff --git a/include/asm-m68k/floppy.h b/arch/m68k/include/asm/floppy.h
similarity index 100%
rename from include/asm-m68k/floppy.h
rename to arch/m68k/include/asm/floppy.h
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
new file mode 100644
index 0000000..e19bc5e
--- /dev/null
+++ b/arch/m68k/include/asm/fpu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fpu_no.h"
+#else
+#include "fpu_mm.h"
+#endif
diff --git a/include/asm-m68k/fpu.h b/arch/m68k/include/asm/fpu_mm.h
similarity index 100%
rename from include/asm-m68k/fpu.h
rename to arch/m68k/include/asm/fpu_mm.h
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68k/include/asm/fpu_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/fpu.h
rename to arch/m68k/include/asm/fpu_no.h
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68k/include/asm/futex.h
similarity index 100%
rename from arch/m68knommu/include/asm/futex.h
rename to arch/m68k/include/asm/futex.h
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
new file mode 100644
index 0000000..56d0d5d
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hardirq_no.h"
+#else
+#include "hardirq_mm.h"
+#endif
diff --git a/include/asm-m68k/hardirq.h b/arch/m68k/include/asm/hardirq_mm.h
similarity index 100%
rename from include/asm-m68k/hardirq.h
rename to arch/m68k/include/asm/hardirq_mm.h
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/hardirq.h
rename to arch/m68k/include/asm/hardirq_no.h
diff --git a/include/asm-m68k/hp300hw.h b/arch/m68k/include/asm/hp300hw.h
similarity index 100%
rename from include/asm-m68k/hp300hw.h
rename to arch/m68k/include/asm/hp300hw.h
diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h
new file mode 100644
index 0000000..e195260
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hw_irq_no.h"
+#else
+#include "hw_irq_mm.h"
+#endif
diff --git a/include/asm-m68k/hw_irq.h b/arch/m68k/include/asm/hw_irq_mm.h
similarity index 100%
rename from include/asm-m68k/hw_irq.h
rename to arch/m68k/include/asm/hw_irq_mm.h
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/hw_irq.h
rename to arch/m68k/include/asm/hw_irq_no.h
diff --git a/include/asm-m68k/hwtest.h b/arch/m68k/include/asm/hwtest.h
similarity index 100%
rename from include/asm-m68k/hwtest.h
rename to arch/m68k/include/asm/hwtest.h
diff --git a/include/asm-m68k/ide.h b/arch/m68k/include/asm/ide.h
similarity index 100%
rename from include/asm-m68k/ide.h
rename to arch/m68k/include/asm/ide.h
diff --git a/include/asm-m68k/idprom.h b/arch/m68k/include/asm/idprom.h
similarity index 100%
rename from include/asm-m68k/idprom.h
rename to arch/m68k/include/asm/idprom.h
diff --git a/include/asm-m68k/intersil.h b/arch/m68k/include/asm/intersil.h
similarity index 100%
rename from include/asm-m68k/intersil.h
rename to arch/m68k/include/asm/intersil.h
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
new file mode 100644
index 0000000..c7210ba
--- /dev/null
+++ b/arch/m68k/include/asm/io.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "io_no.h"
+#else
+#include "io_mm.h"
+#endif
diff --git a/include/asm-m68k/io.h b/arch/m68k/include/asm/io_mm.h
similarity index 100%
rename from include/asm-m68k/io.h
rename to arch/m68k/include/asm/io_mm.h
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68k/include/asm/io_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/io.h
rename to arch/m68k/include/asm/io_no.h
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
similarity index 100%
rename from arch/m68knommu/include/asm/ioctl.h
rename to arch/m68k/include/asm/ioctl.h
diff --git a/include/asm-m68k/ioctls.h b/arch/m68k/include/asm/ioctls.h
similarity index 100%
rename from include/asm-m68k/ioctls.h
rename to arch/m68k/include/asm/ioctls.h
diff --git a/include/asm-m68k/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-m68k/ipcbuf.h
rename to arch/m68k/include/asm/ipcbuf.h
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
new file mode 100644
index 0000000..d031416
--- /dev/null
+++ b/arch/m68k/include/asm/irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "irq_no.h"
+#else
+#include "irq_mm.h"
+#endif
diff --git a/include/asm-m68k/irq.h b/arch/m68k/include/asm/irq_mm.h
similarity index 100%
rename from include/asm-m68k/irq.h
rename to arch/m68k/include/asm/irq_mm.h
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68k/include/asm/irq_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/irq.h
rename to arch/m68k/include/asm/irq_no.h
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
similarity index 100%
rename from arch/m68knommu/include/asm/irq_regs.h
rename to arch/m68k/include/asm/irq_regs.h
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
similarity index 100%
rename from arch/m68knommu/include/asm/kdebug.h
rename to arch/m68k/include/asm/kdebug.h
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
new file mode 100644
index 0000000..045d9fd
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "kmap_types_no.h"
+#else
+#include "kmap_types_mm.h"
+#endif
diff --git a/include/asm-m68k/kmap_types.h b/arch/m68k/include/asm/kmap_types_mm.h
similarity index 100%
rename from include/asm-m68k/kmap_types.h
rename to arch/m68k/include/asm/kmap_types_mm.h
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/kmap_types.h
rename to arch/m68k/include/asm/kmap_types_no.h
diff --git a/include/asm-m68k/linkage.h b/arch/m68k/include/asm/linkage.h
similarity index 100%
rename from include/asm-m68k/linkage.h
rename to arch/m68k/include/asm/linkage.h
diff --git a/include/asm-m68k/local.h b/arch/m68k/include/asm/local.h
similarity index 100%
rename from include/asm-m68k/local.h
rename to arch/m68k/include/asm/local.h
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5206sim.h
rename to arch/m68k/include/asm/m5206sim.h
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m520xsim.h
rename to arch/m68k/include/asm/m520xsim.h
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m523xsim.h
rename to arch/m68k/include/asm/m523xsim.h
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5249sim.h
rename to arch/m68k/include/asm/m5249sim.h
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5272sim.h
rename to arch/m68k/include/asm/m5272sim.h
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m527xsim.h
rename to arch/m68k/include/asm/m527xsim.h
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m528xsim.h
rename to arch/m68k/include/asm/m528xsim.h
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5307sim.h
rename to arch/m68k/include/asm/m5307sim.h
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m532xsim.h
rename to arch/m68k/include/asm/m532xsim.h
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
similarity index 100%
rename from arch/m68knommu/include/asm/m5407sim.h
rename to arch/m68k/include/asm/m5407sim.h
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360.h
rename to arch/m68k/include/asm/m68360.h
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_enet.h
rename to arch/m68k/include/asm/m68360_enet.h
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_pram.h
rename to arch/m68k/include/asm/m68360_pram.h
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_quicc.h
rename to arch/m68k/include/asm/m68360_quicc.h
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h
similarity index 100%
rename from arch/m68knommu/include/asm/m68360_regs.h
rename to arch/m68k/include/asm/m68360_regs.h
diff --git a/include/asm-m68k/mac_asc.h b/arch/m68k/include/asm/mac_asc.h
similarity index 100%
rename from include/asm-m68k/mac_asc.h
rename to arch/m68k/include/asm/mac_asc.h
diff --git a/include/asm-m68k/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
similarity index 100%
rename from include/asm-m68k/mac_baboon.h
rename to arch/m68k/include/asm/mac_baboon.h
diff --git a/include/asm-m68k/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
similarity index 100%
rename from include/asm-m68k/mac_iop.h
rename to arch/m68k/include/asm/mac_iop.h
diff --git a/include/asm-m68k/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
similarity index 100%
rename from include/asm-m68k/mac_mouse.h
rename to arch/m68k/include/asm/mac_mouse.h
diff --git a/include/asm-m68k/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
similarity index 100%
rename from include/asm-m68k/mac_oss.h
rename to arch/m68k/include/asm/mac_oss.h
diff --git a/include/asm-m68k/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
similarity index 100%
rename from include/asm-m68k/mac_psc.h
rename to arch/m68k/include/asm/mac_psc.h
diff --git a/include/asm-m68k/mac_via.h b/arch/m68k/include/asm/mac_via.h
similarity index 100%
rename from include/asm-m68k/mac_via.h
rename to arch/m68k/include/asm/mac_via.h
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
new file mode 100644
index 0000000..fc24b6f
--- /dev/null
+++ b/arch/m68k/include/asm/machdep.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "machdep_no.h"
+#else
+#include "machdep_mm.h"
+#endif
diff --git a/include/asm-m68k/machdep.h b/arch/m68k/include/asm/machdep_mm.h
similarity index 100%
rename from include/asm-m68k/machdep.h
rename to arch/m68k/include/asm/machdep_mm.h
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68k/include/asm/machdep_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/machdep.h
rename to arch/m68k/include/asm/machdep_no.h
diff --git a/include/asm-m68k/machines.h b/arch/m68k/include/asm/machines.h
similarity index 100%
rename from include/asm-m68k/machines.h
rename to arch/m68k/include/asm/machines.h
diff --git a/include/asm-m68k/machw.h b/arch/m68k/include/asm/machw.h
similarity index 100%
rename from include/asm-m68k/machw.h
rename to arch/m68k/include/asm/machw.h
diff --git a/include/asm-m68k/macintosh.h b/arch/m68k/include/asm/macintosh.h
similarity index 100%
rename from include/asm-m68k/macintosh.h
rename to arch/m68k/include/asm/macintosh.h
diff --git a/include/asm-m68k/macints.h b/arch/m68k/include/asm/macints.h
similarity index 100%
rename from include/asm-m68k/macints.h
rename to arch/m68k/include/asm/macints.h
diff --git a/include/asm-m68k/math-emu.h b/arch/m68k/include/asm/math-emu.h
similarity index 100%
rename from include/asm-m68k/math-emu.h
rename to arch/m68k/include/asm/math-emu.h
diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..fb90dcf
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mc146818rtc_no.h"
+#else
+#include "mc146818rtc_mm.h"
+#endif
diff --git a/include/asm-m68k/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_mm.h
similarity index 100%
rename from include/asm-m68k/mc146818rtc.h
rename to arch/m68k/include/asm/mc146818rtc_mm.h
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mc146818rtc.h
rename to arch/m68k/include/asm/mc146818rtc_no.h
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfcache.h
rename to arch/m68k/include/asm/mcfcache.h
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfdma.h
rename to arch/m68k/include/asm/mcfdma.h
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfmbus.h
rename to arch/m68k/include/asm/mcfmbus.h
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfne.h
rename to arch/m68k/include/asm/mcfne.h
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfpci.h
rename to arch/m68k/include/asm/mcfpci.h
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfpit.h
rename to arch/m68k/include/asm/mcfpit.h
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfsim.h
rename to arch/m68k/include/asm/mcfsim.h
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfsmc.h
rename to arch/m68k/include/asm/mcfsmc.h
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcftimer.h
rename to arch/m68k/include/asm/mcftimer.h
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfuart.h
rename to arch/m68k/include/asm/mcfuart.h
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h
similarity index 100%
rename from arch/m68knommu/include/asm/mcfwdebug.h
rename to arch/m68k/include/asm/mcfwdebug.h
diff --git a/include/asm-m68k/md.h b/arch/m68k/include/asm/md.h
similarity index 100%
rename from include/asm-m68k/md.h
rename to arch/m68k/include/asm/md.h
diff --git a/include/asm-m68k/mman.h b/arch/m68k/include/asm/mman.h
similarity index 100%
rename from include/asm-m68k/mman.h
rename to arch/m68k/include/asm/mman.h
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
new file mode 100644
index 0000000..a81d394
--- /dev/null
+++ b/arch/m68k/include/asm/mmu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_no.h"
+#else
+#include "mmu_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
new file mode 100644
index 0000000..b440928
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_context_no.h"
+#else
+#include "mmu_context_mm.h"
+#endif
diff --git a/include/asm-m68k/mmu_context.h b/arch/m68k/include/asm/mmu_context_mm.h
similarity index 100%
rename from include/asm-m68k/mmu_context.h
rename to arch/m68k/include/asm/mmu_context_mm.h
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mmu_context.h
rename to arch/m68k/include/asm/mmu_context_no.h
diff --git a/include/asm-m68k/mmu.h b/arch/m68k/include/asm/mmu_mm.h
similarity index 100%
rename from include/asm-m68k/mmu.h
rename to arch/m68k/include/asm/mmu_mm.h
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68k/include/asm/mmu_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/mmu.h
rename to arch/m68k/include/asm/mmu_no.h
diff --git a/include/asm-m68k/mmzone.h b/arch/m68k/include/asm/mmzone.h
similarity index 100%
rename from include/asm-m68k/mmzone.h
rename to arch/m68k/include/asm/mmzone.h
diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h
new file mode 100644
index 0000000..79b59d1
--- /dev/null
+++ b/arch/m68k/include/asm/module.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "module_no.h"
+#else
+#include "module_mm.h"
+#endif
diff --git a/include/asm-m68k/module.h b/arch/m68k/include/asm/module_mm.h
similarity index 100%
rename from include/asm-m68k/module.h
rename to arch/m68k/include/asm/module_mm.h
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68k/include/asm/module_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/module.h
rename to arch/m68k/include/asm/module_no.h
diff --git a/include/asm-m68k/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
similarity index 100%
rename from include/asm-m68k/motorola_pgalloc.h
rename to arch/m68k/include/asm/motorola_pgalloc.h
diff --git a/include/asm-m68k/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
similarity index 100%
rename from include/asm-m68k/motorola_pgtable.h
rename to arch/m68k/include/asm/motorola_pgtable.h
diff --git a/include/asm-m68k/movs.h b/arch/m68k/include/asm/movs.h
similarity index 100%
rename from include/asm-m68k/movs.h
rename to arch/m68k/include/asm/movs.h
diff --git a/include/asm-m68k/msgbuf.h b/arch/m68k/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-m68k/msgbuf.h
rename to arch/m68k/include/asm/msgbuf.h
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
similarity index 100%
rename from arch/m68knommu/include/asm/mutex.h
rename to arch/m68k/include/asm/mutex.h
diff --git a/include/asm-m68k/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h
similarity index 100%
rename from include/asm-m68k/mvme147hw.h
rename to arch/m68k/include/asm/mvme147hw.h
diff --git a/include/asm-m68k/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h
similarity index 100%
rename from include/asm-m68k/mvme16xhw.h
rename to arch/m68k/include/asm/mvme16xhw.h
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
similarity index 100%
rename from arch/m68knommu/include/asm/nettel.h
rename to arch/m68k/include/asm/nettel.h
diff --git a/include/asm-m68k/nubus.h b/arch/m68k/include/asm/nubus.h
similarity index 100%
rename from include/asm-m68k/nubus.h
rename to arch/m68k/include/asm/nubus.h
diff --git a/include/asm-m68k/openprom.h b/arch/m68k/include/asm/openprom.h
similarity index 100%
rename from include/asm-m68k/openprom.h
rename to arch/m68k/include/asm/openprom.h
diff --git a/include/asm-m68k/oplib.h b/arch/m68k/include/asm/oplib.h
similarity index 100%
rename from include/asm-m68k/oplib.h
rename to arch/m68k/include/asm/oplib.h
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
new file mode 100644
index 0000000..f2b4480
--- /dev/null
+++ b/arch/m68k/include/asm/page.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_no.h"
+#else
+#include "page_mm.h"
+#endif
diff --git a/include/asm-m68k/page.h b/arch/m68k/include/asm/page_mm.h
similarity index 100%
rename from include/asm-m68k/page.h
rename to arch/m68k/include/asm/page_mm.h
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68k/include/asm/page_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/page.h
rename to arch/m68k/include/asm/page_no.h
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
new file mode 100644
index 0000000..66455c8
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_offset_no.h"
+#else
+#include "page_offset_mm.h"
+#endif
diff --git a/include/asm-m68k/page_offset.h b/arch/m68k/include/asm/page_offset_mm.h
similarity index 100%
rename from include/asm-m68k/page_offset.h
rename to arch/m68k/include/asm/page_offset_mm.h
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/page_offset.h
rename to arch/m68k/include/asm/page_offset_no.h
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
new file mode 100644
index 0000000..40d1112
--- /dev/null
+++ b/arch/m68k/include/asm/param.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "param_no.h"
+#else
+#include "param_mm.h"
+#endif
diff --git a/include/asm-m68k/param.h b/arch/m68k/include/asm/param_mm.h
similarity index 100%
rename from include/asm-m68k/param.h
rename to arch/m68k/include/asm/param_mm.h
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68k/include/asm/param_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/param.h
rename to arch/m68k/include/asm/param_no.h
diff --git a/include/asm-m68k/parport.h b/arch/m68k/include/asm/parport.h
similarity index 100%
rename from include/asm-m68k/parport.h
rename to arch/m68k/include/asm/parport.h
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
new file mode 100644
index 0000000..dbea953
--- /dev/null
+++ b/arch/m68k/include/asm/pci.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pci_no.h"
+#else
+#include "pci_mm.h"
+#endif
diff --git a/include/asm-m68k/pci.h b/arch/m68k/include/asm/pci_mm.h
similarity index 100%
rename from include/asm-m68k/pci.h
rename to arch/m68k/include/asm/pci_mm.h
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68k/include/asm/pci_no.h
similarity index 95%
rename from arch/m68knommu/include/asm/pci.h
rename to arch/m68k/include/asm/pci_no.h
index a13f3cc..9abbc03 100644
--- a/arch/m68knommu/include/asm/pci.h
+++ b/arch/m68k/include/asm/pci_no.h
@@ -1,7 +1,7 @@
 #ifndef M68KNOMMU_PCI_H
 #define	M68KNOMMU_PCI_H
 
-#include <asm-m68k/pci.h>
+#include <asm/pci_mm.h>
 
 #ifdef CONFIG_COMEMPCI
 /*
diff --git a/include/asm-m68k/percpu.h b/arch/m68k/include/asm/percpu.h
similarity index 100%
rename from include/asm-m68k/percpu.h
rename to arch/m68k/include/asm/percpu.h
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
new file mode 100644
index 0000000..059cb73
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgalloc_no.h"
+#else
+#include "pgalloc_mm.h"
+#endif
diff --git a/include/asm-m68k/pgalloc.h b/arch/m68k/include/asm/pgalloc_mm.h
similarity index 100%
rename from include/asm-m68k/pgalloc.h
rename to arch/m68k/include/asm/pgalloc_mm.h
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/pgalloc.h
rename to arch/m68k/include/asm/pgalloc_no.h
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
new file mode 100644
index 0000000..ee6759e
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgtable_no.h"
+#else
+#include "pgtable_mm.h"
+#endif
diff --git a/include/asm-m68k/pgtable.h b/arch/m68k/include/asm/pgtable_mm.h
similarity index 100%
rename from include/asm-m68k/pgtable.h
rename to arch/m68k/include/asm/pgtable_mm.h
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/pgtable.h
rename to arch/m68k/include/asm/pgtable_no.h
diff --git a/include/asm-m68k/poll.h b/arch/m68k/include/asm/poll.h
similarity index 100%
rename from include/asm-m68k/poll.h
rename to arch/m68k/include/asm/poll.h
diff --git a/include/asm-m68k/posix_types.h b/arch/m68k/include/asm/posix_types.h
similarity index 100%
rename from include/asm-m68k/posix_types.h
rename to arch/m68k/include/asm/posix_types.h
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
new file mode 100644
index 0000000..fc3f2c2
--- /dev/null
+++ b/arch/m68k/include/asm/processor.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "processor_no.h"
+#else
+#include "processor_mm.h"
+#endif
diff --git a/include/asm-m68k/processor.h b/arch/m68k/include/asm/processor_mm.h
similarity index 100%
rename from include/asm-m68k/processor.h
rename to arch/m68k/include/asm/processor_mm.h
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68k/include/asm/processor_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/processor.h
rename to arch/m68k/include/asm/processor_no.h
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
new file mode 100644
index 0000000..e83cd2f
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ptrace_no.h"
+#else
+#include "ptrace_mm.h"
+#endif
diff --git a/include/asm-m68k/ptrace.h b/arch/m68k/include/asm/ptrace_mm.h
similarity index 100%
rename from include/asm-m68k/ptrace.h
rename to arch/m68k/include/asm/ptrace_mm.h
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/ptrace.h
rename to arch/m68k/include/asm/ptrace_no.h
diff --git a/include/asm-m68k/q40_master.h b/arch/m68k/include/asm/q40_master.h
similarity index 100%
rename from include/asm-m68k/q40_master.h
rename to arch/m68k/include/asm/q40_master.h
diff --git a/include/asm-m68k/q40ints.h b/arch/m68k/include/asm/q40ints.h
similarity index 100%
rename from include/asm-m68k/q40ints.h
rename to arch/m68k/include/asm/q40ints.h
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h
similarity index 100%
rename from arch/m68knommu/include/asm/quicc_simple.h
rename to arch/m68k/include/asm/quicc_simple.h
diff --git a/include/asm-m68k/raw_io.h b/arch/m68k/include/asm/raw_io.h
similarity index 100%
rename from include/asm-m68k/raw_io.h
rename to arch/m68k/include/asm/raw_io.h
diff --git a/include/asm-m68k/resource.h b/arch/m68k/include/asm/resource.h
similarity index 100%
rename from include/asm-m68k/resource.h
rename to arch/m68k/include/asm/resource.h
diff --git a/include/asm-m68k/rtc.h b/arch/m68k/include/asm/rtc.h
similarity index 100%
rename from include/asm-m68k/rtc.h
rename to arch/m68k/include/asm/rtc.h
diff --git a/include/asm-m68k/sbus.h b/arch/m68k/include/asm/sbus.h
similarity index 100%
rename from include/asm-m68k/sbus.h
rename to arch/m68k/include/asm/sbus.h
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
new file mode 100644
index 0000000..b7e5286
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "scatterlist_no.h"
+#else
+#include "scatterlist_mm.h"
+#endif
diff --git a/include/asm-m68k/scatterlist.h b/arch/m68k/include/asm/scatterlist_mm.h
similarity index 100%
rename from include/asm-m68k/scatterlist.h
rename to arch/m68k/include/asm/scatterlist_mm.h
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/scatterlist.h
rename to arch/m68k/include/asm/scatterlist_no.h
diff --git a/include/asm-m68k/sections.h b/arch/m68k/include/asm/sections.h
similarity index 100%
rename from include/asm-m68k/sections.h
rename to arch/m68k/include/asm/sections.h
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
new file mode 100644
index 0000000..82583bc
--- /dev/null
+++ b/arch/m68k/include/asm/segment.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "segment_no.h"
+#else
+#include "segment_mm.h"
+#endif
diff --git a/include/asm-m68k/segment.h b/arch/m68k/include/asm/segment_mm.h
similarity index 100%
rename from include/asm-m68k/segment.h
rename to arch/m68k/include/asm/segment_mm.h
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68k/include/asm/segment_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/segment.h
rename to arch/m68k/include/asm/segment_no.h
diff --git a/include/asm-m68k/sembuf.h b/arch/m68k/include/asm/sembuf.h
similarity index 100%
rename from include/asm-m68k/sembuf.h
rename to arch/m68k/include/asm/sembuf.h
diff --git a/include/asm-m68k/serial.h b/arch/m68k/include/asm/serial.h
similarity index 100%
rename from include/asm-m68k/serial.h
rename to arch/m68k/include/asm/serial.h
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
new file mode 100644
index 0000000..842f86f
--- /dev/null
+++ b/arch/m68k/include/asm/setup.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "setup_no.h"
+#else
+#include "setup_mm.h"
+#endif
diff --git a/include/asm-m68k/setup.h b/arch/m68k/include/asm/setup_mm.h
similarity index 100%
rename from include/asm-m68k/setup.h
rename to arch/m68k/include/asm/setup_mm.h
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68k/include/asm/setup_no.h
similarity index 83%
rename from arch/m68knommu/include/asm/setup.h
rename to arch/m68k/include/asm/setup_no.h
index fb86bb2..45d286c 100644
--- a/arch/m68knommu/include/asm/setup.h
+++ b/arch/m68k/include/asm/setup_no.h
@@ -1,6 +1,6 @@
 #ifdef __KERNEL__
 
-#include <asm-m68k/setup.h>
+#include <asm/setup_mm.h>
 
 /* We have a bigger command line buffer. */
 #undef COMMAND_LINE_SIZE
diff --git a/include/asm-m68k/shm.h b/arch/m68k/include/asm/shm.h
similarity index 100%
rename from include/asm-m68k/shm.h
rename to arch/m68k/include/asm/shm.h
diff --git a/include/asm-m68k/shmbuf.h b/arch/m68k/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-m68k/shmbuf.h
rename to arch/m68k/include/asm/shmbuf.h
diff --git a/include/asm-m68k/shmparam.h b/arch/m68k/include/asm/shmparam.h
similarity index 100%
rename from include/asm-m68k/shmparam.h
rename to arch/m68k/include/asm/shmparam.h
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
new file mode 100644
index 0000000..bff6d40
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "sigcontext_no.h"
+#else
+#include "sigcontext_mm.h"
+#endif
diff --git a/include/asm-m68k/sigcontext.h b/arch/m68k/include/asm/sigcontext_mm.h
similarity index 100%
rename from include/asm-m68k/sigcontext.h
rename to arch/m68k/include/asm/sigcontext_mm.h
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/sigcontext.h
rename to arch/m68k/include/asm/sigcontext_no.h
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
new file mode 100644
index 0000000..61219d7
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "siginfo_no.h"
+#else
+#include "siginfo_mm.h"
+#endif
diff --git a/include/asm-m68k/siginfo.h b/arch/m68k/include/asm/siginfo_mm.h
similarity index 100%
rename from include/asm-m68k/siginfo.h
rename to arch/m68k/include/asm/siginfo_mm.h
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/siginfo.h
rename to arch/m68k/include/asm/siginfo_no.h
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
new file mode 100644
index 0000000..3c19988
--- /dev/null
+++ b/arch/m68k/include/asm/signal.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "signal_no.h"
+#else
+#include "signal_mm.h"
+#endif
diff --git a/include/asm-m68k/signal.h b/arch/m68k/include/asm/signal_mm.h
similarity index 100%
rename from include/asm-m68k/signal.h
rename to arch/m68k/include/asm/signal_mm.h
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68k/include/asm/signal_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/signal.h
rename to arch/m68k/include/asm/signal_no.h
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68k/include/asm/smp.h
similarity index 100%
rename from arch/m68knommu/include/asm/smp.h
rename to arch/m68k/include/asm/smp.h
diff --git a/include/asm-m68k/socket.h b/arch/m68k/include/asm/socket.h
similarity index 100%
rename from include/asm-m68k/socket.h
rename to arch/m68k/include/asm/socket.h
diff --git a/include/asm-m68k/sockios.h b/arch/m68k/include/asm/sockios.h
similarity index 100%
rename from include/asm-m68k/sockios.h
rename to arch/m68k/include/asm/sockios.h
diff --git a/include/asm-m68k/spinlock.h b/arch/m68k/include/asm/spinlock.h
similarity index 100%
rename from include/asm-m68k/spinlock.h
rename to arch/m68k/include/asm/spinlock.h
diff --git a/include/asm-m68k/stat.h b/arch/m68k/include/asm/stat.h
similarity index 100%
rename from include/asm-m68k/stat.h
rename to arch/m68k/include/asm/stat.h
diff --git a/include/asm-m68k/statfs.h b/arch/m68k/include/asm/statfs.h
similarity index 100%
rename from include/asm-m68k/statfs.h
rename to arch/m68k/include/asm/statfs.h
diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h
new file mode 100644
index 0000000..2c356f9
--- /dev/null
+++ b/arch/m68k/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "string_no.h"
+#else
+#include "string_mm.h"
+#endif
diff --git a/include/asm-m68k/string.h b/arch/m68k/include/asm/string_mm.h
similarity index 100%
rename from include/asm-m68k/string.h
rename to arch/m68k/include/asm/string_mm.h
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68k/include/asm/string_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/string.h
rename to arch/m68k/include/asm/string_no.h
diff --git a/include/asm-m68k/sun3-head.h b/arch/m68k/include/asm/sun3-head.h
similarity index 100%
rename from include/asm-m68k/sun3-head.h
rename to arch/m68k/include/asm/sun3-head.h
diff --git a/include/asm-m68k/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
similarity index 100%
rename from include/asm-m68k/sun3_pgalloc.h
rename to arch/m68k/include/asm/sun3_pgalloc.h
diff --git a/include/asm-m68k/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
similarity index 100%
rename from include/asm-m68k/sun3_pgtable.h
rename to arch/m68k/include/asm/sun3_pgtable.h
diff --git a/include/asm-m68k/sun3ints.h b/arch/m68k/include/asm/sun3ints.h
similarity index 100%
rename from include/asm-m68k/sun3ints.h
rename to arch/m68k/include/asm/sun3ints.h
diff --git a/include/asm-m68k/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h
similarity index 100%
rename from include/asm-m68k/sun3mmu.h
rename to arch/m68k/include/asm/sun3mmu.h
diff --git a/include/asm-m68k/sun3x.h b/arch/m68k/include/asm/sun3x.h
similarity index 100%
rename from include/asm-m68k/sun3x.h
rename to arch/m68k/include/asm/sun3x.h
diff --git a/include/asm-m68k/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h
similarity index 100%
rename from include/asm-m68k/sun3xflop.h
rename to arch/m68k/include/asm/sun3xflop.h
diff --git a/include/asm-m68k/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h
similarity index 100%
rename from include/asm-m68k/sun3xprom.h
rename to arch/m68k/include/asm/sun3xprom.h
diff --git a/include/asm-m68k/suspend.h b/arch/m68k/include/asm/suspend.h
similarity index 100%
rename from include/asm-m68k/suspend.h
rename to arch/m68k/include/asm/suspend.h
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
new file mode 100644
index 0000000..7d7dde1
--- /dev/null
+++ b/arch/m68k/include/asm/swab.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "swab_no.h"
+#else
+#include "swab_mm.h"
+#endif
diff --git a/include/asm-m68k/swab.h b/arch/m68k/include/asm/swab_mm.h
similarity index 100%
rename from include/asm-m68k/swab.h
rename to arch/m68k/include/asm/swab_mm.h
diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68k/include/asm/swab_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/swab.h
rename to arch/m68k/include/asm/swab_no.h
diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h
new file mode 100644
index 0000000..ccea925
--- /dev/null
+++ b/arch/m68k/include/asm/system.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "system_no.h"
+#else
+#include "system_mm.h"
+#endif
diff --git a/include/asm-m68k/system.h b/arch/m68k/include/asm/system_mm.h
similarity index 100%
rename from include/asm-m68k/system.h
rename to arch/m68k/include/asm/system_mm.h
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68k/include/asm/system_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/system.h
rename to arch/m68k/include/asm/system_no.h
diff --git a/include/asm-m68k/termbits.h b/arch/m68k/include/asm/termbits.h
similarity index 100%
rename from include/asm-m68k/termbits.h
rename to arch/m68k/include/asm/termbits.h
diff --git a/include/asm-m68k/termios.h b/arch/m68k/include/asm/termios.h
similarity index 100%
rename from include/asm-m68k/termios.h
rename to arch/m68k/include/asm/termios.h
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
new file mode 100644
index 0000000..f31a3f4
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "thread_info_no.h"
+#else
+#include "thread_info_mm.h"
+#endif
diff --git a/include/asm-m68k/thread_info.h b/arch/m68k/include/asm/thread_info_mm.h
similarity index 100%
rename from include/asm-m68k/thread_info.h
rename to arch/m68k/include/asm/thread_info_mm.h
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/thread_info.h
rename to arch/m68k/include/asm/thread_info_no.h
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
new file mode 100644
index 0000000..7197629
--- /dev/null
+++ b/arch/m68k/include/asm/timex.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "timex_no.h"
+#else
+#include "timex_mm.h"
+#endif
diff --git a/include/asm-m68k/timex.h b/arch/m68k/include/asm/timex_mm.h
similarity index 100%
rename from include/asm-m68k/timex.h
rename to arch/m68k/include/asm/timex_mm.h
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68k/include/asm/timex_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/timex.h
rename to arch/m68k/include/asm/timex_no.h
diff --git a/include/asm-m68k/tlb.h b/arch/m68k/include/asm/tlb.h
similarity index 100%
rename from include/asm-m68k/tlb.h
rename to arch/m68k/include/asm/tlb.h
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
new file mode 100644
index 0000000..b6f93b3
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "tlbflush_no.h"
+#else
+#include "tlbflush_mm.h"
+#endif
diff --git a/include/asm-m68k/tlbflush.h b/arch/m68k/include/asm/tlbflush_mm.h
similarity index 100%
rename from include/asm-m68k/tlbflush.h
rename to arch/m68k/include/asm/tlbflush_mm.h
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/tlbflush.h
rename to arch/m68k/include/asm/tlbflush_no.h
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68k/include/asm/topology.h
similarity index 100%
rename from arch/m68knommu/include/asm/topology.h
rename to arch/m68k/include/asm/topology.h
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
new file mode 100644
index 0000000..3011ec0
--- /dev/null
+++ b/arch/m68k/include/asm/traps.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "traps_no.h"
+#else
+#include "traps_mm.h"
+#endif
diff --git a/include/asm-m68k/traps.h b/arch/m68k/include/asm/traps_mm.h
similarity index 100%
rename from include/asm-m68k/traps.h
rename to arch/m68k/include/asm/traps_mm.h
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68k/include/asm/traps_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/traps.h
rename to arch/m68k/include/asm/traps_no.h
diff --git a/include/asm-m68k/types.h b/arch/m68k/include/asm/types.h
similarity index 100%
rename from include/asm-m68k/types.h
rename to arch/m68k/include/asm/types.h
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
new file mode 100644
index 0000000..38f92db
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "uaccess_no.h"
+#else
+#include "uaccess_mm.h"
+#endif
diff --git a/include/asm-m68k/uaccess.h b/arch/m68k/include/asm/uaccess_mm.h
similarity index 100%
rename from include/asm-m68k/uaccess.h
rename to arch/m68k/include/asm/uaccess_mm.h
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/uaccess.h
rename to arch/m68k/include/asm/uaccess_no.h
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
new file mode 100644
index 0000000..b53cd16
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ucontext_no.h"
+#else
+#include "ucontext_mm.h"
+#endif
diff --git a/include/asm-m68k/ucontext.h b/arch/m68k/include/asm/ucontext_mm.h
similarity index 100%
rename from include/asm-m68k/ucontext.h
rename to arch/m68k/include/asm/ucontext_mm.h
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/ucontext.h
rename to arch/m68k/include/asm/ucontext_no.h
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
new file mode 100644
index 0000000..c640bba
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unaligned_no.h"
+#else
+#include "unaligned_mm.h"
+#endif
diff --git a/include/asm-m68k/unaligned.h b/arch/m68k/include/asm/unaligned_mm.h
similarity index 100%
rename from include/asm-m68k/unaligned.h
rename to arch/m68k/include/asm/unaligned_mm.h
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/unaligned.h
rename to arch/m68k/include/asm/unaligned_no.h
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
new file mode 100644
index 0000000..df1d9d4
--- /dev/null
+++ b/arch/m68k/include/asm/unistd.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unistd_no.h"
+#else
+#include "unistd_mm.h"
+#endif
diff --git a/include/asm-m68k/unistd.h b/arch/m68k/include/asm/unistd_mm.h
similarity index 100%
rename from include/asm-m68k/unistd.h
rename to arch/m68k/include/asm/unistd_mm.h
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68k/include/asm/unistd_no.h
similarity index 100%
rename from arch/m68knommu/include/asm/unistd.h
rename to arch/m68k/include/asm/unistd_no.h
diff --git a/include/asm-m68k/user.h b/arch/m68k/include/asm/user.h
similarity index 100%
rename from include/asm-m68k/user.h
rename to arch/m68k/include/asm/user.h
diff --git a/include/asm-m68k/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
similarity index 100%
rename from include/asm-m68k/virtconvert.h
rename to arch/m68k/include/asm/virtconvert.h
diff --git a/include/asm-m68k/xor.h b/arch/m68k/include/asm/xor.h
similarity index 100%
rename from include/asm-m68k/xor.h
rename to arch/m68k/include/asm/xor.h
diff --git a/include/asm-m68k/zorro.h b/arch/m68k/include/asm/zorro.h
similarity index 100%
rename from include/asm-m68k/zorro.h
rename to arch/m68k/include/asm/zorro.h
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
deleted file mode 100644
index c68e168..0000000
--- a/arch/m68knommu/include/asm/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
deleted file mode 100644
index 9c6c76a..0000000
--- a/arch/m68knommu/include/asm/byteorder.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _M68KNOMMU_BYTEORDER_H
-#define _M68KNOMMU_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h
deleted file mode 100644
index bcf5a6a..0000000
--- a/arch/m68knommu/include/asm/cachectl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/cachectl.h>
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h
deleted file mode 100644
index a0c4a66..0000000
--- a/arch/m68knommu/include/asm/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_CPUTIME_H
-#define __M68KNOMMU_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M68KNOMMU_CPUTIME_H */
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h
deleted file mode 100644
index 7e8c22b..0000000
--- a/arch/m68knommu/include/asm/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/errno.h>
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h
deleted file mode 100644
index f6a552c..0000000
--- a/arch/m68knommu/include/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/fcntl.h>
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h
deleted file mode 100644
index 700626a..0000000
--- a/arch/m68knommu/include/asm/hwtest.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/hwtest.h>
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h
deleted file mode 100644
index 0b1eb4d..0000000
--- a/arch/m68knommu/include/asm/ioctls.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ioctls.h>
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h
deleted file mode 100644
index e4a7be6..0000000
--- a/arch/m68knommu/include/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/ipcbuf.h>
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h
deleted file mode 100644
index c288a19..0000000
--- a/arch/m68knommu/include/asm/linkage.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/linkage.h>
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h
deleted file mode 100644
index 84a39c1..0000000
--- a/arch/m68knommu/include/asm/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __M68KNOMMU_LOCAL_H
-#define __M68KNOMMU_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __M68KNOMMU_LOCAL_H */
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h
deleted file mode 100644
index 7e70905..0000000
--- a/arch/m68knommu/include/asm/math-emu.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/math-emu.h>
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h
deleted file mode 100644
index d810c78..0000000
--- a/arch/m68knommu/include/asm/md.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/md.h>
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h
deleted file mode 100644
index 4846c68..0000000
--- a/arch/m68knommu/include/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/mman.h>
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h
deleted file mode 100644
index 81a1677..0000000
--- a/arch/m68knommu/include/asm/movs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/movs.h>
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h
deleted file mode 100644
index bdfadec4..0000000
--- a/arch/m68knommu/include/asm/msgbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/msgbuf.h>
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h
deleted file mode 100644
index fdba795..0000000
--- a/arch/m68knommu/include/asm/openprom.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/openprom.h>
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h
deleted file mode 100644
index ce079dc..0000000
--- a/arch/m68knommu/include/asm/oplib.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/oplib.h>
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h
deleted file mode 100644
index 5de72c3..0000000
--- a/arch/m68knommu/include/asm/percpu.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ARCH_M68KNOMMU_PERCPU__
-#define __ARCH_M68KNOMMU_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M68KNOMMU_PERCPU__ */
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h
deleted file mode 100644
index ee1b6cb..0000000
--- a/arch/m68knommu/include/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/poll.h>
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h
deleted file mode 100644
index 6205fb9..0000000
--- a/arch/m68knommu/include/asm/posix_types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/posix_types.h>
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h
deleted file mode 100644
index 7fa63d5..0000000
--- a/arch/m68knommu/include/asm/resource.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/resource.h>
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h
deleted file mode 100644
index eaf18ec..0000000
--- a/arch/m68knommu/include/asm/rtc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/rtc.h>
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h
deleted file mode 100644
index dd0ecb9..0000000
--- a/arch/m68knommu/include/asm/sections.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef _M68KNOMMU_SECTIONS_H
-#define _M68KNOMMU_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h
deleted file mode 100644
index 3a634f9..0000000
--- a/arch/m68knommu/include/asm/sembuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sembuf.h>
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h
deleted file mode 100644
index cc8e522..0000000
--- a/arch/m68knommu/include/asm/shm.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shm.h>
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h
deleted file mode 100644
index bc34cf8..0000000
--- a/arch/m68knommu/include/asm/shmbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmbuf.h>
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h
deleted file mode 100644
index d7ee696..0000000
--- a/arch/m68knommu/include/asm/shmparam.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/shmparam.h>
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h
deleted file mode 100644
index ac5478b..0000000
--- a/arch/m68knommu/include/asm/socket.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/socket.h>
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h
deleted file mode 100644
index dcc6a89..0000000
--- a/arch/m68knommu/include/asm/sockios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/sockios.h>
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h
deleted file mode 100644
index 6bb1f06..0000000
--- a/arch/m68knommu/include/asm/spinlock.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/spinlock.h>
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h
deleted file mode 100644
index 3d4b260..0000000
--- a/arch/m68knommu/include/asm/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/stat.h>
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h
deleted file mode 100644
index 2ce99ea..0000000
--- a/arch/m68knommu/include/asm/statfs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/statfs.h>
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h
deleted file mode 100644
index 05dd6bc..0000000
--- a/arch/m68knommu/include/asm/termbits.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termbits.h>
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h
deleted file mode 100644
index e733788..0000000
--- a/arch/m68knommu/include/asm/termios.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/termios.h>
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h
deleted file mode 100644
index 77a7c51..0000000
--- a/arch/m68knommu/include/asm/tlb.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/tlb.h>
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h
deleted file mode 100644
index 031238c..0000000
--- a/arch/m68knommu/include/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/types.h>
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h
deleted file mode 100644
index a5a555b..0000000
--- a/arch/m68knommu/include/asm/user.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-m68k/user.h>
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index a3bbbf0..783da85 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -959,7 +959,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index 634bb4e..fea9bc9 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -996,7 +996,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index b6698a2..786a9bc 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -1006,8 +1006,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index dd13db4..84d6491 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -929,7 +929,7 @@
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 CONFIG_PMCTWILED=y
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index db92726..8426d3b 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -1845,7 +1845,7 @@
 CONFIG_SENSORS_DS1337=m
 CONFIG_SENSORS_DS1374=m
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_SENSORS_PCA9539=m
 CONFIG_SENSORS_PCF8591=m
@@ -1872,7 +1872,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_W1=m
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index d953652..2728caa 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -640,8 +640,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index c7c0864..83d5c58 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -522,7 +522,7 @@
 #
 # SPI Protocol Masters
 #
-CONFIG_SPI_AT25=y
+CONFIG_EEPROM_AT25=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_HAVE_GPIO_LIB=y
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index d4df8b6..909a89c 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -185,7 +185,7 @@
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar", "simple-bus";
+			compatible = "gianfar";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 3dcc001..359c3b7 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -89,7 +89,7 @@
 
 			ramdisk@0 {
 				reg = <0x0 0x03000000>;
-				readl-only;
+				read-only;
 			};
 
 			diagnostic@3000000 {
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
index 2e45a87..70d5c3f 100644
--- a/arch/powerpc/configs/44x/sam440ep_defconfig
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -747,8 +747,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 260c81f..3b77f09 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -685,8 +685,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=y
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig
index 3df6274..99c495a 100644
--- a/arch/powerpc/configs/52xx/cm5200_defconfig
+++ b/arch/powerpc/configs/52xx/cm5200_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig
index 5b969f9..9796220 100644
--- a/arch/powerpc/configs/52xx/lite5200b_defconfig
+++ b/arch/powerpc/configs/52xx/lite5200b_defconfig
@@ -762,8 +762,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig
index 3c0d4e5..d081e00 100644
--- a/arch/powerpc/configs/52xx/motionpro_defconfig
+++ b/arch/powerpc/configs/52xx/motionpro_defconfig
@@ -629,8 +629,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig
index 9d02077..b21b8e8 100644
--- a/arch/powerpc/configs/52xx/pcm030_defconfig
+++ b/arch/powerpc/configs/52xx/pcm030_defconfig
@@ -740,8 +740,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig
index bc19005..7995457 100644
--- a/arch/powerpc/configs/52xx/tqm5200_defconfig
+++ b/arch/powerpc/configs/52xx/tqm5200_defconfig
@@ -645,8 +645,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index cbecaf3..fc4a39a 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:49 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:47 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +114,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -382,6 +391,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
@@ -456,6 +466,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -486,8 +502,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -536,6 +554,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -590,6 +611,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -666,8 +691,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -732,15 +759,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -760,8 +786,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -782,6 +810,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -827,11 +856,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -840,18 +869,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -916,6 +940,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -934,11 +959,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -977,6 +1002,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1014,6 +1043,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1061,6 +1091,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1094,10 +1125,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1117,6 +1145,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1209,6 +1238,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1244,6 +1274,8 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1251,6 +1283,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1269,11 +1302,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index bfc32ea..9e47ae9 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:50 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:48 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -468,6 +478,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -499,8 +515,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -559,6 +578,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -627,6 +648,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -651,7 +675,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -661,6 +684,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -691,6 +715,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -715,6 +740,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -792,8 +821,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -858,15 +889,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -884,7 +914,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -902,8 +932,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -925,6 +957,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -971,11 +1004,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -984,18 +1017,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1080,6 +1108,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1106,18 +1135,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1177,9 +1205,11 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1194,6 +1224,10 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1231,12 +1265,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1284,6 +1320,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1317,10 +1354,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1340,6 +1374,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1397,6 +1432,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1448,6 +1484,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1457,6 +1494,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1465,11 +1504,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1496,11 +1537,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index aad0e1a..03db97c 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:51 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:49 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -468,6 +478,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -499,8 +515,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -559,6 +578,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -688,6 +709,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -712,7 +736,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -722,6 +745,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -752,6 +776,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -776,6 +801,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -853,8 +882,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -919,15 +950,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -945,7 +975,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,8 +993,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -986,6 +1018,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -1032,11 +1065,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1045,18 +1078,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1141,6 +1169,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1167,18 +1196,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1238,9 +1266,11 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1255,6 +1285,10 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1292,12 +1326,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1345,6 +1381,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1378,10 +1415,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1401,6 +1435,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1458,6 +1493,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1509,6 +1545,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1518,6 +1555,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1526,11 +1565,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1557,11 +1598,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 9cb8c8b..fb17de5 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:53 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:50 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -405,8 +414,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -449,6 +460,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -465,6 +477,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -523,6 +537,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -563,7 +580,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -572,6 +588,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -594,6 +611,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -665,8 +686,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -730,15 +753,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -758,8 +780,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -780,6 +804,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -820,11 +845,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -833,18 +858,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -900,9 +920,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -940,6 +964,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -987,6 +1012,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1020,10 +1046,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1032,6 +1055,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1087,6 +1111,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1120,6 +1145,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1127,6 +1154,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1145,11 +1173,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 9cc976f..a012ce2 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:54 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:52 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -226,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -407,8 +416,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -451,6 +462,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -467,6 +479,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -525,6 +539,9 @@
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -566,7 +583,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -575,6 +591,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -599,6 +616,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -677,8 +698,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -745,15 +768,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -770,7 +792,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -788,8 +810,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -811,6 +835,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -857,11 +882,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -870,18 +895,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -966,6 +986,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -991,18 +1012,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1050,6 +1070,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1099,6 +1123,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1135,10 +1160,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1147,6 +1169,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1246,6 +1269,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1279,6 +1303,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1286,6 +1312,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1304,11 +1331,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 07a674f..4bcc4a1 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:56 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:53 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -381,6 +390,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -426,9 +436,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x1000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -454,6 +462,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -485,8 +499,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -499,7 +515,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -524,6 +539,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -577,6 +593,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -593,6 +610,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -723,6 +742,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -751,6 +773,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -775,6 +798,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -832,8 +859,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -898,15 +927,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -923,7 +951,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -953,11 +981,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -966,18 +994,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1041,6 +1064,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1059,18 +1083,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1117,6 +1140,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1154,12 +1181,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1207,6 +1236,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1243,10 +1273,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1256,6 +1283,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1352,6 +1380,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1385,6 +1414,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1392,6 +1423,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1410,11 +1442,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 426232c..9ba5518 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:57 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:55 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -381,6 +390,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -426,9 +436,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfe000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -454,6 +462,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -485,8 +499,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -529,6 +545,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -545,6 +562,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -603,6 +622,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -631,6 +653,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -655,6 +678,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -712,8 +739,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -778,15 +807,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -803,7 +831,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -833,11 +861,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,18 +874,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -921,6 +944,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -939,18 +963,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -996,6 +1019,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1033,12 +1060,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1086,6 +1115,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1122,10 +1152,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1135,6 +1162,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1231,6 +1259,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1264,6 +1293,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1271,6 +1302,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1289,11 +1321,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 36e2e93..18e4bc0 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:58 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:56 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -404,8 +413,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -454,6 +465,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -477,7 +491,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -487,6 +500,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -517,6 +531,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -539,6 +554,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -608,8 +627,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -673,15 +694,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -701,8 +721,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -723,6 +745,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -763,11 +786,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -776,18 +799,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -843,9 +861,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -883,6 +905,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -930,6 +953,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -963,10 +987,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -975,6 +996,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1028,6 +1050,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1061,6 +1084,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1068,6 +1093,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1086,11 +1112,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 80eb6c9..76db813 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:59 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:58 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +122,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +129,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,8 @@
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -224,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +270,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -287,6 +293,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -343,6 +350,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -358,8 +366,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -380,6 +389,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -451,6 +461,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -480,8 +496,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -524,6 +542,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -540,6 +559,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -598,6 +619,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -638,7 +662,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -647,6 +670,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -669,6 +693,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -740,8 +768,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -805,15 +835,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -833,8 +862,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -855,6 +886,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -895,11 +927,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -908,18 +940,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -975,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1015,6 +1046,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1062,6 +1094,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1095,10 +1128,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1108,6 +1138,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1163,6 +1194,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1196,6 +1228,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1203,6 +1237,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1221,11 +1256,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index b9b2368..0dc11c4 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +76,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +114,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +198,8 @@
 CONFIG_QUICC_ENGINE=y
 CONFIG_QE_GPIO=y
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -224,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -235,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +272,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +352,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +368,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -384,6 +393,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -462,6 +472,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -493,8 +509,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -543,6 +561,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -566,7 +587,6 @@
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -582,6 +602,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -656,8 +680,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -723,16 +749,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -744,12 +768,13 @@
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_MPC83xx=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -758,6 +783,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -794,11 +824,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -807,18 +837,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -897,6 +923,7 @@
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -962,6 +989,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -995,10 +1023,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1018,6 +1043,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1074,6 +1100,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1109,6 +1136,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1116,6 +1145,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -1145,11 +1175,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index f6350d7..e42f6b39 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:00 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:59 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -404,8 +413,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -448,6 +459,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -464,6 +476,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -583,6 +597,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -628,6 +645,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -650,6 +668,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -720,8 +742,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -787,15 +811,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -815,8 +838,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -837,6 +862,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -877,11 +903,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -890,18 +916,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -957,9 +978,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -991,6 +1016,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1024,10 +1050,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1036,6 +1059,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1093,6 +1117,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1124,6 +1149,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1131,6 +1158,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1149,11 +1177,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index f447de1..408022f 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:01 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:01 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +113,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -124,7 +123,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -132,11 +130,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -153,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +199,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -236,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +271,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,8 +362,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,8 +409,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,6 +471,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -590,6 +603,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -644,6 +660,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -721,8 +741,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -789,15 +811,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -817,8 +838,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -839,6 +862,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -884,11 +908,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -897,18 +921,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -961,11 +980,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -973,12 +990,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1011,6 +1031,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1029,11 +1050,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1074,6 +1095,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1105,6 +1130,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1138,10 +1164,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1150,6 +1173,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1207,6 +1231,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1238,6 +1263,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1245,6 +1272,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1267,11 +1295,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 8d2d7ee..a0c42fb 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:02 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:02 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +112,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,7 +121,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -130,11 +128,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,8 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -223,6 +225,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -234,12 +237,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +269,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +292,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -342,6 +349,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -357,8 +365,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -402,8 +411,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -452,6 +463,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -504,6 +518,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -573,8 +591,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -640,15 +660,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -668,8 +687,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -690,6 +711,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -730,11 +752,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -743,18 +765,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -822,6 +839,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -855,10 +873,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -867,6 +882,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -908,6 +924,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -939,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -946,6 +965,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -964,11 +984,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 1af7b9e..6479bb9 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:03 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:03 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,8 +78,8 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -111,7 +113,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +123,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,6 +144,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +274,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +331,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,8 +347,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -432,6 +441,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -454,6 +469,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -507,9 +523,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -534,6 +553,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -595,8 +618,10 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -614,6 +639,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -642,11 +672,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -656,14 +686,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -716,9 +739,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -749,6 +776,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -782,10 +810,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -795,6 +820,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -845,6 +871,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -895,6 +922,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -904,6 +932,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -912,11 +942,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -943,6 +975,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index e243e14..e31b6a4 100644
--- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:05 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:04 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +80,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +98,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +121,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +138,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +200,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -235,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +271,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +295,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -376,6 +384,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -392,8 +401,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,8 +452,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -487,6 +499,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -503,6 +516,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -622,6 +637,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -668,6 +686,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -692,6 +711,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -783,8 +806,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -849,8 +874,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -869,11 +894,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -882,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -920,6 +940,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -965,6 +986,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -976,8 +1003,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1018,11 +1047,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1073,6 +1108,7 @@
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1175,11 +1211,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1187,12 +1221,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1225,6 +1262,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1250,18 +1288,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1309,6 +1346,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1346,6 +1387,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1405,7 +1447,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1447,10 +1491,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1461,6 +1502,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1562,6 +1604,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1613,6 +1656,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1622,6 +1666,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1630,11 +1676,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1661,11 +1709,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1699,7 +1752,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index d790cba..905e8a3 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:06 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:05 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -124,13 +125,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,6 +146,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +189,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -224,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +276,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -326,6 +333,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -341,8 +349,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -380,6 +389,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,6 +425,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -437,6 +450,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -502,8 +519,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -534,11 +553,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -548,14 +567,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -608,9 +620,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -640,6 +656,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -673,10 +690,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -685,6 +699,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -735,6 +750,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -784,6 +800,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -793,6 +810,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -801,11 +820,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -831,6 +852,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index f6cb014..f6fa0b7 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:08 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:07 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +80,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +98,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +121,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +138,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +200,7 @@
 # CONFIG_CPM2 is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -235,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -266,6 +272,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -377,6 +385,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -393,8 +402,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -443,8 +453,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -488,6 +500,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -504,6 +517,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -623,6 +638,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -667,6 +685,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -691,6 +710,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -782,8 +805,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
@@ -848,8 +873,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -869,11 +894,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -882,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -920,6 +940,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -965,6 +986,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -976,8 +1003,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1018,11 +1047,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1075,6 +1110,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1177,11 +1213,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1189,12 +1223,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1227,6 +1264,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1252,18 +1290,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1311,6 +1348,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1348,6 +1389,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1406,7 +1448,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1448,10 +1492,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1462,6 +1503,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1563,6 +1605,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1614,6 +1657,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1623,6 +1667,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1631,11 +1677,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1661,11 +1709,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1699,7 +1752,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 6cf9292..095e2de 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:09 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:09 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -116,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -127,13 +128,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -150,6 +149,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +193,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -227,12 +231,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -257,6 +263,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -280,6 +287,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -336,6 +344,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -351,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,6 +410,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -448,6 +459,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -496,6 +510,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -518,6 +533,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -583,8 +602,10 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -604,6 +625,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -637,11 +663,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -651,14 +677,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -714,9 +733,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -748,6 +771,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -781,10 +805,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -793,6 +814,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -843,6 +865,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -892,6 +915,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -901,6 +925,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -909,11 +935,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -939,6 +967,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 597be84..186c101 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:11 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:10 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,7 +124,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -131,11 +131,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -152,6 +150,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -192,6 +194,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -230,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +265,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -283,6 +289,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +346,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -354,8 +362,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -401,8 +410,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -445,6 +456,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -461,6 +473,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -519,6 +533,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -564,6 +581,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -586,6 +604,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -658,8 +680,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -723,8 +747,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -750,8 +774,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -772,6 +798,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -812,11 +839,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -825,18 +852,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -892,9 +914,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -932,6 +958,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -979,6 +1006,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1012,10 +1040,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1024,6 +1049,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1077,6 +1103,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1126,6 +1153,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1135,6 +1163,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1143,11 +1173,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1184,11 +1216,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 32aeb79..813223a 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc8
-# Tue Dec 30 11:17:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:12 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -48,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -81,12 +81,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -99,6 +99,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,7 +122,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -133,7 +133,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -141,12 +140,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +160,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -242,7 +243,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -276,6 +276,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -299,6 +300,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -387,6 +389,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -403,8 +406,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -500,6 +504,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -516,6 +521,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -635,6 +642,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -679,6 +689,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -703,6 +714,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -794,6 +809,7 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HVC_UDBG is not set
@@ -861,8 +877,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -895,10 +911,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
 
 #
@@ -926,6 +944,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -971,6 +990,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -982,8 +1007,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1024,11 +1051,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1081,6 +1114,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1183,11 +1217,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1195,12 +1227,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1233,6 +1268,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1269,7 +1305,6 @@
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1317,6 +1352,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1401,7 +1440,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1443,10 +1484,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1457,6 +1495,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1558,6 +1597,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1609,6 +1649,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1618,6 +1659,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1626,6 +1669,7 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
@@ -1700,7 +1744,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 8769359..f95961c 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:14 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:13 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +117,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +190,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -225,12 +229,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,6 +285,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -334,6 +342,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -349,8 +358,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -397,6 +407,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -439,6 +450,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -498,6 +510,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -542,6 +557,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -564,6 +580,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -634,8 +654,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -672,11 +694,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -686,14 +708,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -749,9 +764,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -783,6 +802,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -816,10 +836,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -828,6 +845,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -878,6 +896,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -927,6 +946,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -936,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -944,11 +966,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -974,6 +998,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index bfe3c97..e68e8098 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:16 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -251,6 +257,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -274,6 +281,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +338,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +354,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -391,6 +401,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -439,6 +450,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -483,6 +497,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -505,6 +520,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -575,8 +594,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -613,11 +634,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -627,14 +648,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -693,6 +707,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -726,10 +741,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -738,6 +750,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -776,6 +789,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -807,6 +821,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -814,6 +830,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -831,6 +848,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 8c507f8..b1c766e 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:17 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:17 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +188,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +274,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -324,6 +331,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -339,8 +347,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -378,6 +387,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -413,6 +423,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -435,6 +448,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -500,8 +517,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -530,11 +549,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -544,14 +563,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -604,9 +616,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -666,6 +682,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -699,10 +716,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -711,6 +725,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -761,6 +776,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -809,6 +825,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -818,6 +835,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -826,11 +845,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -867,6 +888,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 5a0cf58..eb4ba7a 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:19 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:18 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -116,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,18 +129,15 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,6 +154,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -196,6 +198,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -233,12 +236,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -263,6 +268,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -286,6 +292,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -400,6 +407,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -415,8 +423,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -470,14 +479,17 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -485,7 +497,6 @@
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -510,6 +521,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -564,6 +576,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -580,6 +593,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -640,6 +655,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -686,6 +704,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -708,6 +727,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -805,11 +828,13 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -823,6 +848,7 @@
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
 
 #
 # I2C Hardware Bus support
@@ -877,13 +903,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -898,6 +923,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -924,8 +954,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -946,6 +978,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -972,11 +1005,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -985,17 +1018,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1061,9 +1089,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1096,6 +1128,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1135,10 +1168,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1147,6 +1177,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1227,6 +1258,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
@@ -1278,6 +1310,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1287,6 +1320,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1295,11 +1330,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1325,6 +1362,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f3e4f34..f4379b1 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:20 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:19 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -113,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,13 +124,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -146,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +189,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -252,6 +258,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -273,6 +280,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +337,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -344,8 +353,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -435,6 +445,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -464,8 +480,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -508,6 +526,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -567,6 +586,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -590,7 +612,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -600,6 +621,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -629,6 +651,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -651,6 +674,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -721,8 +748,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -787,8 +816,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -814,8 +843,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -836,6 +867,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -862,11 +894,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -875,18 +907,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -942,9 +969,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -976,6 +1007,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1009,10 +1041,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1032,6 +1061,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1082,6 +1112,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1117,6 +1148,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1124,6 +1157,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1141,6 +1175,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index c624893..b866923 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:21 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index eef45b9..0bc4597 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:22 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:20 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -45,7 +47,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +117,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +127,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +134,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +153,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -195,6 +197,7 @@
 # CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -233,12 +236,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +270,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -288,6 +294,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +351,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -359,8 +367,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -383,6 +392,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -465,6 +475,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=m
@@ -502,8 +518,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -546,6 +564,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -605,6 +624,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -649,6 +671,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -671,6 +694,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -741,8 +768,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -806,8 +835,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -833,8 +862,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -855,6 +886,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -881,11 +913,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -894,18 +926,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -961,9 +988,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1001,6 +1032,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1048,6 +1080,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1081,10 +1114,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1095,6 +1125,7 @@
 # CONFIG_JFFS2_FS is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1145,6 +1176,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1194,6 +1226,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1203,6 +1236,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1211,11 +1246,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1241,6 +1278,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 11b637e..d5a864d 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:23 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:21 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 2519169..a250091 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:25 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:22 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -76,12 +78,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -114,7 +116,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,13 +126,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +147,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,6 +192,7 @@
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -276,6 +283,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -332,6 +340,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -347,8 +356,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -438,6 +448,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +484,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -512,6 +530,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -594,7 +616,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -604,6 +625,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -634,6 +656,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -656,6 +679,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -728,8 +755,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -796,13 +825,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -816,6 +844,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -842,8 +875,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -864,6 +899,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -890,11 +926,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -903,18 +939,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -970,9 +1002,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1004,6 +1040,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1037,10 +1074,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1060,6 +1094,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1110,6 +1145,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1145,6 +1181,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1152,6 +1190,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1169,6 +1208,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 391874c..1ab5aba 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:30 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -42,11 +42,12 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +79,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -117,7 +118,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +129,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,12 +136,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +156,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +198,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,7 +217,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
@@ -225,6 +226,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +239,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +274,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -293,6 +298,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -502,6 +508,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -522,6 +529,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -538,8 +546,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -562,6 +571,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -638,10 +648,17 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -668,8 +685,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -729,6 +748,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -848,6 +869,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -902,6 +926,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -924,6 +952,7 @@
 # CONFIG_ATM_IA is not set
 # CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -1016,7 +1045,9 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -1055,6 +1086,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -1081,8 +1113,8 @@
 # Miscellaneous I2C Chip support
 #
 CONFIG_DS1682=y
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1095,7 +1127,31 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -1108,8 +1164,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1130,6 +1188,7 @@
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1163,8 +1222,8 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
-# CONFIG_8xxx_WDT is not set
 CONFIG_GEF_WDT=y
+# CONFIG_8xxx_WDT is not set
 
 #
 # PCI-based Watchdog Cards
@@ -1176,11 +1235,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1189,18 +1248,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1260,11 +1315,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1272,12 +1325,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1310,6 +1366,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1332,18 +1389,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1391,6 +1447,11 @@
 # CONFIG_USB_VST is not set
 # CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1478,6 +1539,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1514,10 +1576,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1527,6 +1586,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1613,6 +1673,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1663,6 +1724,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1672,6 +1734,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1681,11 +1745,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1706,6 +1772,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
@@ -1716,11 +1783,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index 72854a1..bbdf4bf 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:28 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +115,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -194,6 +194,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -213,7 +214,6 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
@@ -221,6 +221,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -232,12 +233,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -265,6 +268,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -287,6 +291,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -360,6 +365,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -375,8 +381,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -401,6 +408,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_OF_PARTS is not set
@@ -481,6 +489,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -510,8 +524,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -524,7 +540,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -549,6 +564,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -618,6 +634,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -757,6 +775,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -841,7 +863,9 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -905,8 +929,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -926,11 +950,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -939,18 +963,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1029,6 +1048,7 @@
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1054,6 +1074,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1130,6 +1151,7 @@
 CONFIG_SND_SOC=y
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
@@ -1157,9 +1179,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1197,6 +1223,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1244,6 +1271,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -1276,10 +1304,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1289,6 +1314,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1388,6 +1414,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1438,6 +1465,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1447,6 +1475,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1455,11 +1485,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1486,6 +1518,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 41220ec..92acfdf 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:29 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:25 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +96,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +119,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,7 +130,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,12 +137,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +157,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -198,6 +199,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -225,6 +227,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -268,6 +273,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -291,6 +297,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -379,6 +386,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -395,8 +403,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,8 +454,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,6 +501,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -506,6 +518,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -625,6 +639,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -670,6 +687,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -694,6 +712,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -785,8 +807,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -851,8 +875,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -872,11 +896,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -885,18 +909,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -923,6 +942,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -968,6 +988,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -979,8 +1005,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1021,11 +1049,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1078,6 +1112,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1180,11 +1215,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1192,12 +1225,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1230,6 +1266,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1255,18 +1292,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1314,6 +1350,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1351,6 +1391,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1397,7 +1438,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1439,10 +1482,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1453,6 +1493,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1554,6 +1595,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1605,6 +1647,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1614,6 +1657,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1622,11 +1667,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1653,11 +1700,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1691,7 +1742,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index a434286..04797e7 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:40:26 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:36:23 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -46,7 +46,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
@@ -117,7 +117,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +128,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,12 +135,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -159,6 +155,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -197,6 +197,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,7 +216,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
@@ -225,6 +225,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -237,12 +238,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +273,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -292,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -501,6 +506,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -521,6 +527,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -537,8 +544,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -561,6 +569,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -637,6 +646,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -666,8 +681,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -734,6 +751,9 @@
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -786,6 +806,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_DUMMY is not set
@@ -801,6 +825,7 @@
 # CONFIG_ATM_IA is not set
 # CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
+# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -892,8 +917,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -958,8 +985,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -985,8 +1012,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1007,6 +1036,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1047,11 +1077,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1060,18 +1090,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1134,9 +1159,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1182,11 +1211,18 @@
 CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=m
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -1216,10 +1252,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1229,6 +1262,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
 # CONFIG_OMFS_FS is not set
@@ -1317,6 +1351,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1367,6 +1402,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1376,6 +1412,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1385,11 +1423,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1411,6 +1451,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1420,11 +1461,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 024f279..aaab5cc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:32 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:24 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -71,12 +72,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -109,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,13 +119,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +140,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -187,6 +189,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,12 +208,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -225,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -323,6 +329,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -338,8 +345,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -428,6 +436,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +484,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -495,6 +512,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -580,7 +601,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -598,11 +621,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -612,14 +635,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -674,6 +690,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -706,10 +723,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -719,6 +733,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -774,6 +789,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -821,6 +837,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -829,6 +846,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -837,11 +856,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5078594..5103319 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:34 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:26 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +78,12 @@
 CONFIG_AUDIT_TREE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -122,6 +122,7 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -135,7 +136,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -143,11 +143,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -164,6 +162,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -221,6 +223,7 @@
 #
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -243,10 +246,12 @@
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -258,12 +263,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -287,6 +294,7 @@
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -314,6 +322,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -574,6 +584,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -594,6 +605,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -616,8 +628,6 @@
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
@@ -635,12 +645,9 @@
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -665,6 +672,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=m
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -737,6 +745,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -834,6 +848,8 @@
 CONFIG_MEGARAID_SAS=m
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 CONFIG_SCSI_FUTURE_DOMAIN=m
@@ -852,6 +868,7 @@
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -896,6 +913,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -949,6 +969,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1055,7 +1079,9 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=m
@@ -1124,8 +1150,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1151,8 +1177,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 CONFIG_SENSORS_ADM1031=m
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 CONFIG_SENSORS_DS1621=m
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1173,6 +1201,7 @@
 CONFIG_SENSORS_LM90=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 CONFIG_SENSORS_MAX1619=m
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1218,11 +1247,11 @@
 # USB-based Watchdog Cards
 #
 CONFIG_USBPCWATCHDOG=m
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1234,14 +1263,8 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1298,7 +1321,7 @@
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1310,6 +1333,7 @@
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
@@ -1339,18 +1363,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1419,12 +1442,14 @@
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1458,6 +1483,10 @@
 # CONFIG_USB_UEAGLEATM is not set
 # CONFIG_USB_XUSBATM is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1500,19 +1529,23 @@
 CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1549,10 +1582,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_ECRYPT_FS is not set
@@ -1573,6 +1603,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1678,6 +1709,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=m
@@ -1703,7 +1735,7 @@
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1722,6 +1754,7 @@
 # CONFIG_DEBUG_MUTEXES is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_HIGHMEM=y
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -1731,6 +1764,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1741,7 +1775,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1750,11 +1789,14 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1763,6 +1805,7 @@
 # CONFIG_MSI_BITMAP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1776,6 +1819,7 @@
 # CONFIG_SECURITYFS is not set
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1785,7 +1829,6 @@
 CONFIG_SECURITY_SELINUX_DEVELOP=y
 CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
-# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 CONFIG_CRYPTO=y
 
@@ -1794,11 +1837,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index c420e47..c6d2baa 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1012,7 +1012,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 9ba3c6f..d212377 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -834,7 +834,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 63b3c23..5094a65 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -941,8 +941,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index a6f1cff..add6419 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:36 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:27 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -86,6 +86,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -107,7 +108,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -181,6 +183,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -206,6 +209,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -213,12 +217,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -243,6 +249,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -265,6 +272,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -346,6 +354,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +369,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -455,6 +465,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -522,9 +538,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -569,6 +588,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -591,6 +611,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -633,6 +657,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -651,6 +676,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -668,11 +698,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -682,14 +712,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -782,13 +805,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -877,6 +898,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -924,6 +946,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -933,6 +956,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -941,10 +966,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -971,11 +998,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index 870d289..b2fdfd9 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:37 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:28 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -70,12 +71,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +188,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -205,12 +208,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -225,12 +228,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -323,6 +329,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -338,8 +345,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -428,6 +436,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -470,6 +484,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -495,6 +512,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -536,7 +557,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -555,11 +578,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -569,14 +592,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -630,6 +646,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -662,10 +679,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -675,6 +689,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -730,6 +745,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -777,6 +793,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -785,6 +802,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -793,11 +812,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index f85e71c..fc90592 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -994,8 +994,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 54fa624..aa5855a 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:29 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -74,12 +74,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -118,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -129,7 +128,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -137,11 +135,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -158,6 +154,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -200,6 +200,7 @@
 # CONFIG_TAU is not set
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -227,6 +228,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -238,12 +240,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -267,6 +271,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -289,6 +294,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -455,6 +462,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -471,12 +479,9 @@
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -501,6 +506,7 @@
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -554,9 +560,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xffc00000
-CONFIG_MTD_PHYSMAP_LEN=0x400000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -580,6 +584,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -610,8 +620,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -654,6 +666,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -670,6 +683,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -827,6 +842,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -851,6 +867,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -949,8 +969,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -1015,8 +1037,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -1042,8 +1064,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1064,6 +1088,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1090,11 +1115,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1103,18 +1128,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1165,12 +1185,6 @@
 # CONFIG_HID_PID is not set
 
 #
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-
-#
 # Special HID drivers
 #
 CONFIG_HID_COMPAT=y
@@ -1202,6 +1216,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1227,18 +1242,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1295,12 +1309,14 @@
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1329,6 +1345,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1366,6 +1386,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1417,6 +1438,7 @@
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1458,10 +1480,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1471,6 +1490,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1561,6 +1581,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1614,6 +1635,7 @@
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1623,6 +1645,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1631,11 +1655,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1662,11 +1688,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 045f1b0..8b24400 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -866,8 +866,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 8d3c623..c58c38d 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:38 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:30 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -89,6 +89,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -111,7 +112,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +122,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -144,6 +142,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +192,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -215,6 +218,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -222,12 +226,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +259,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -275,6 +282,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -337,6 +345,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -351,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -451,6 +461,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -522,6 +538,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -558,6 +577,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -601,6 +624,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_BRIQ_PANEL is not set
@@ -621,6 +645,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -638,11 +667,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -652,14 +681,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -753,10 +775,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
@@ -768,6 +787,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -857,6 +877,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -905,6 +926,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -914,6 +936,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -922,10 +946,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -953,11 +979,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index fbaa67f..297b5d5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:39 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:32 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -69,12 +70,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -106,7 +107,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +117,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -186,6 +188,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +332,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -340,8 +348,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -435,6 +444,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -489,6 +504,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -514,6 +532,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -555,7 +577,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -574,11 +598,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -588,14 +612,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -659,6 +676,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -692,10 +710,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -715,6 +730,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -771,6 +787,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -802,6 +819,8 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -809,6 +828,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -827,6 +847,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index 15c5604..5ff3de2 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -844,8 +844,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index f80b1ca..38712e8 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:40 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:33 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -73,12 +73,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -112,7 +112,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -122,13 +121,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -145,6 +142,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -184,6 +185,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -211,6 +213,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -222,12 +225,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -249,6 +254,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -271,6 +277,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -327,6 +334,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +350,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -388,6 +397,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -429,6 +439,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -445,6 +456,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -563,6 +576,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -586,7 +602,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -600,6 +615,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -630,6 +646,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -652,6 +669,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -722,8 +743,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -760,11 +783,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -774,14 +797,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -837,9 +853,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -870,7 +890,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -904,10 +926,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -916,6 +935,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -970,6 +990,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1003,6 +1024,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1010,6 +1033,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,6 +1052,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index c8f5dec..d85a43c 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:41 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:35 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -86,6 +86,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,13 +119,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -183,6 +185,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -216,12 +220,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -246,6 +252,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -268,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +357,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -363,8 +372,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -459,6 +469,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -526,9 +542,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -573,6 +592,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -595,6 +615,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -690,6 +714,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -708,6 +733,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -725,11 +755,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -739,14 +769,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -843,13 +866,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -940,6 +961,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -991,6 +1013,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1000,6 +1023,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1008,10 +1033,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1038,11 +1065,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index d582014..45f03ca 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:42 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:36 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -77,12 +77,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -115,7 +115,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,7 +125,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -134,11 +132,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -155,6 +151,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -205,6 +205,8 @@
 CONFIG_QE_GPIO=y
 # CONFIG_FSL_ULI1575 is not set
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -232,6 +234,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -243,12 +246,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +280,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -297,6 +303,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +376,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -390,6 +399,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
@@ -472,6 +482,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -503,8 +519,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,6 +565,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -563,6 +582,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -682,6 +703,9 @@
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -722,7 +746,6 @@
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
@@ -731,6 +754,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -755,6 +779,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -833,8 +861,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -902,16 +932,14 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -923,6 +951,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -949,8 +982,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -971,6 +1006,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1016,11 +1052,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1029,18 +1065,14 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1093,11 +1125,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1105,12 +1135,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1143,6 +1176,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
@@ -1161,11 +1195,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1206,6 +1240,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1237,6 +1276,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1270,10 +1310,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1283,6 +1320,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1342,6 +1380,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1373,6 +1412,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1380,6 +1421,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1398,11 +1440,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c87b53a..fb08819 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:37 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -21,7 +21,9 @@
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -46,7 +48,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -79,12 +81,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -97,6 +99,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -119,7 +122,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -131,7 +133,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -139,11 +140,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +159,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -202,6 +205,7 @@
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -240,12 +244,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +277,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -294,6 +301,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -382,6 +390,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -398,8 +407,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -449,8 +459,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -494,6 +506,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -510,6 +523,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -629,6 +644,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -675,6 +693,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -699,6 +718,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -792,8 +815,10 @@
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -860,13 +885,12 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -881,6 +905,11 @@
 # CONFIG_GPIO_SYSFS is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
@@ -901,11 +930,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -915,18 +944,14 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -953,6 +978,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -998,6 +1024,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -1009,8 +1041,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1051,11 +1085,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1108,6 +1148,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1210,11 +1251,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1222,12 +1261,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1260,6 +1302,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1286,18 +1329,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1345,6 +1387,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1389,6 +1436,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1448,7 +1496,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1490,10 +1540,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1504,6 +1551,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1605,6 +1653,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1656,6 +1705,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1665,6 +1715,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1673,11 +1725,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1704,11 +1758,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1742,7 +1800,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 8272b1a..1793d08 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:43 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:38 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -69,12 +70,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -106,7 +107,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +117,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -140,6 +138,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,6 +187,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -223,12 +227,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -325,6 +332,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -340,8 +348,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -372,6 +381,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -407,6 +417,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -433,6 +446,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -518,7 +535,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -549,11 +568,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -563,14 +582,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -623,9 +635,13 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -657,6 +673,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -690,10 +707,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -702,6 +716,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -758,6 +773,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -790,6 +806,8 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -797,6 +815,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -814,6 +833,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 1736bbc..adc756e 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:44 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:39 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -41,11 +41,12 @@
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -78,12 +79,12 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -96,6 +97,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -118,7 +120,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,7 +131,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -138,12 +138,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +158,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -199,6 +201,7 @@
 # CONFIG_QUICC_ENGINE is not set
 CONFIG_FSL_ULI1575=y
 # CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -226,6 +229,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -238,12 +242,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +275,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 CONFIG_HAS_RAPIDIO=y
@@ -292,6 +299,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -380,6 +388,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -396,8 +405,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -420,6 +430,7 @@
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -446,8 +457,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,6 +504,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -507,6 +521,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -626,6 +642,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -671,6 +690,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -695,6 +715,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -786,8 +810,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -826,6 +852,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -852,8 +879,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-CONFIG_SENSORS_EEPROM=y
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -866,18 +893,42 @@
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -886,18 +937,15 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -924,6 +972,7 @@
 CONFIG_MEDIA_TUNER_MT20XX=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 
 #
@@ -969,6 +1018,12 @@
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 # CONFIG_DVB_CX24110 is not set
@@ -980,8 +1035,10 @@
 # CONFIG_DVB_STV0299 is not set
 # CONFIG_DVB_TDA8083 is not set
 # CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_TDA8261 is not set
 # CONFIG_DVB_VES1X93 is not set
 # CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TUNER_CX24113 is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TUA6100 is not set
 # CONFIG_DVB_CX24116 is not set
@@ -1022,11 +1079,17 @@
 # CONFIG_DVB_OR51132 is not set
 # CONFIG_DVB_BCM3510 is not set
 # CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_LGDT3304 is not set
 # CONFIG_DVB_S5H1409 is not set
 # CONFIG_DVB_AU8522 is not set
 # CONFIG_DVB_S5H1411 is not set
 
 #
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
 # Digital terrestrial only tuners/PLL
 #
 # CONFIG_DVB_PLL is not set
@@ -1079,6 +1142,7 @@
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
@@ -1181,11 +1245,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1193,12 +1255,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1231,6 +1296,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1256,18 +1322,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1315,6 +1380,11 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1352,6 +1422,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1398,7 +1469,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1440,10 +1513,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 CONFIG_ADFS_FS=m
 # CONFIG_ADFS_FS_RW is not set
 CONFIG_AFFS_FS=m
@@ -1454,6 +1524,7 @@
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1555,6 +1626,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1606,6 +1678,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1615,6 +1688,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1623,11 +1698,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1654,11 +1731,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1692,7 +1773,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index a4283b6..4b76321 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:46 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:41 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_8xx=y
+CONFIG_PPC_MMU_NOHASH=y
 # CONFIG_PPC_MM_SLICES is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
@@ -40,7 +41,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -70,12 +71,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -108,7 +109,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -118,13 +118,11 @@
 CONFIG_HAVE_CLK=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,6 +139,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -193,6 +195,7 @@
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -212,12 +215,12 @@
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -232,12 +235,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -279,6 +284,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +352,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -439,6 +447,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -481,6 +495,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -506,6 +523,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -547,7 +568,9 @@
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -566,11 +589,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -580,14 +603,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -641,6 +657,7 @@
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
@@ -673,10 +690,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -686,6 +700,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -741,6 +756,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -788,6 +804,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -796,6 +813,8 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -804,11 +823,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 199e5f5..4f8681c 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -984,7 +984,7 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_SENSORS_EEPROM=y
+CONFIG_EEPROM_LEGACY=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index de9b1218..5339bb4 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1232,8 +1232,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
index 5b2c1cb..326205c 100644
--- a/arch/powerpc/configs/ppc40x_defconfig
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -770,8 +770,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index e6d2522..5e6d55f 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -821,8 +821,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index d4685d1..88c6295 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1261,8 +1261,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 01f05ec..7d044df 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1801,8 +1801,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-CONFIG_AT24=m
-CONFIG_SENSORS_EEPROM=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SENSORS_PCF8574=m
 CONFIG_PCF8575=m
 CONFIG_SENSORS_PCA9539=m
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 228099d..fdded96 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:47 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:42 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -44,7 +44,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -87,6 +87,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -109,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,13 +120,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -142,6 +140,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -183,6 +185,7 @@
 CONFIG_CPM2=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -209,6 +212,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -216,12 +220,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -247,6 +253,7 @@
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -269,6 +276,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -350,6 +358,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -364,8 +373,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -460,6 +470,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -520,6 +536,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -577,9 +594,12 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
-# CONFIG_MDIO_OF_GPIO is not set
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -624,6 +644,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -646,6 +667,10 @@
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 CONFIG_PPP=y
@@ -743,6 +768,7 @@
 CONFIG_SERIAL_CPM_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -761,6 +787,11 @@
 # CONFIG_DEBUG_GPIO is not set
 
 #
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
 # I2C GPIO expanders:
 #
 
@@ -778,11 +809,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -792,14 +823,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-
-#
-# Voltage and Current regulators
-#
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -844,7 +868,7 @@
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
@@ -859,10 +883,12 @@
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -876,6 +902,11 @@
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -938,13 +969,11 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1035,6 +1064,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1086,6 +1116,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1095,6 +1126,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1103,10 +1136,12 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
@@ -1133,11 +1168,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 6046dc0..e971db1 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:44 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -45,7 +45,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -75,12 +75,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -118,7 +118,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -128,13 +127,11 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -151,6 +148,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,6 +191,7 @@
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -213,10 +215,12 @@
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,12 +232,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +286,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +344,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -350,8 +360,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -445,6 +456,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -475,8 +492,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -489,7 +508,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -519,6 +537,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -571,6 +590,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -587,6 +607,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -707,6 +729,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -730,7 +755,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -744,6 +768,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -773,6 +798,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -797,6 +823,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -877,8 +907,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -943,8 +975,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -970,8 +1002,10 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -992,6 +1026,7 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
@@ -1018,11 +1053,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1031,18 +1066,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -1101,11 +1131,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1113,12 +1141,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
 CONFIG_THRUSTMASTER_FF=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
@@ -1148,6 +1179,7 @@
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -1170,11 +1202,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -1216,6 +1248,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1253,6 +1289,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1299,7 +1336,9 @@
 # CONFIG_FS_POSIX_ACL is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1333,10 +1372,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1346,6 +1382,7 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1400,6 +1437,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1433,6 +1471,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1440,6 +1480,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1458,6 +1499,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1e520ab..61b1008 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1055,8 +1055,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index b3f5671..86512c8 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Sat Nov  8 12:39:48 2008
+# Linux kernel version: 2.6.29-rc2
+# Mon Jan 26 15:35:46 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -43,7 +43,7 @@
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -73,12 +73,12 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -110,7 +110,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,7 +119,6 @@
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -128,11 +126,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -149,6 +145,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -191,6 +191,7 @@
 # CONFIG_TAU is not set
 # CONFIG_QUICC_ENGINE is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
 
 #
 # Kernel options
@@ -217,6 +218,7 @@
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,12 +230,14 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -257,6 +261,7 @@
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_STUB is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -279,6 +284,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=m
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -345,8 +352,9 @@
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -367,6 +375,7 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_OF_PARTS is not set
@@ -416,9 +425,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xFF800000
-CONFIG_MTD_PHYSMAP_LEN=0x00800000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -442,6 +449,12 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -468,8 +481,10 @@
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -483,7 +498,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -512,6 +526,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -582,6 +597,8 @@
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -672,6 +689,10 @@
 # CONFIG_IWLWIFI_LEDS is not set
 
 #
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -729,8 +750,10 @@
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
@@ -795,8 +818,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -816,11 +839,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -829,18 +852,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 
 #
 # Multimedia devices
@@ -903,6 +921,7 @@
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_EHCI_FSL is not set
 CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
@@ -925,18 +944,17 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -983,6 +1001,10 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1020,6 +1042,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1070,7 +1093,9 @@
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1104,10 +1129,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1127,6 +1149,7 @@
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1204,6 +1227,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
@@ -1239,6 +1263,8 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 
 #
 # Tracers
@@ -1246,6 +1272,7 @@
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index 5177bdd..91a2c80 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -71,6 +71,7 @@
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
 	{},
 };
 
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index d480f39..74d0bbb 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -172,14 +172,14 @@
 #ifndef __s390x__
 #define SET_PERSONALITY(ex) set_personality(PER_LINUX)
 #else /* __s390x__ */
-#define SET_PERSONALITY(ex)				\
-do {							\
-	if (current->personality != PER_LINUX32)	\
-		set_personality(PER_LINUX);		\
-	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
-		set_thread_flag(TIF_31BIT);		\
-	else						\
-		clear_thread_flag(TIF_31BIT);		\
+#define SET_PERSONALITY(ex)					\
+do {								\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX);			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		set_thread_flag(TIF_31BIT);			\
+	else							\
+		clear_thread_flag(TIF_31BIT);			\
 } while (0)
 #endif /* __s390x__ */
 
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 6035cd2..62c706e 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1767,3 +1767,41 @@
 sys_epoll_create1_wrapper:
 	lgfr	%r2,%r2			# int
 	jg	sys_epoll_create1	# branch to system call
+
+	.globl	sys32_readahead_wrapper
+sys32_readahead_wrapper:
+	lgfr	%r2,%r2			# int
+	llgfr	%r3,%r3			# u32
+	llgfr	%r4,%r4			# u32
+	lgfr	%r5,%r5			# s32
+	jg	sys32_readahead		# branch to system call
+
+	.globl	sys32_sendfile64_wrapper
+sys32_sendfile64_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	llgtr	%r4,%r4			# compat_loff_t *
+	lgfr	%r5,%r5			# s32
+	jg	sys32_sendfile64	# branch to system call
+
+	.globl	sys_tkill_wrapper
+sys_tkill_wrapper:
+	lgfr	%r2,%r2			# pid_t
+	lgfr	%r3,%r3			# int
+	jg	sys_tkill		# branch to system call
+
+	.globl	sys_tgkill_wrapper
+sys_tgkill_wrapper:
+	lgfr	%r2,%r2			# pid_t
+	lgfr	%r3,%r3			# pid_t
+	lgfr	%r4,%r4			# int
+	jg	sys_tgkill		# branch to system call
+
+	.globl	compat_sys_keyctl_wrapper
+compat_sys_keyctl_wrapper:
+	llgfr	%r2,%r2			# u32
+	llgfr	%r3,%r3			# u32
+	llgfr	%r4,%r4			# u32
+	llgfr	%r5,%r5			# u32
+	llgfr	%r6,%r6			# u32
+	jg	compat_sys_keyctl	# branch to system call
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 76d16e0..fe5b25a 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -194,7 +194,7 @@
 SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper)
 SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper)
 SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper)		/* 185 */
-SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack)
+SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack_wrapper)
 SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper)
 NI_SYSCALL							/* streams1 */
 NI_SYSCALL							/* streams2 */
@@ -230,8 +230,8 @@
 SYSCALL(sys_madvise,sys_madvise,sys32_madvise_wrapper)
 SYSCALL(sys_getdents64,sys_getdents64,sys32_getdents64_wrapper)	/* 220 */
 SYSCALL(sys_fcntl64,sys_ni_syscall,compat_sys_fcntl64_wrapper)
-SYSCALL(sys_readahead,sys_readahead,sys32_readahead)
-SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64)
+SYSCALL(sys_readahead,sys_readahead,sys32_readahead_wrapper)
+SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64_wrapper)
 SYSCALL(sys_setxattr,sys_setxattr,sys32_setxattr_wrapper)
 SYSCALL(sys_lsetxattr,sys_lsetxattr,sys32_lsetxattr_wrapper)	/* 225 */
 SYSCALL(sys_fsetxattr,sys_fsetxattr,sys32_fsetxattr_wrapper)
@@ -245,11 +245,11 @@
 SYSCALL(sys_lremovexattr,sys_lremovexattr,sys32_lremovexattr_wrapper)
 SYSCALL(sys_fremovexattr,sys_fremovexattr,sys32_fremovexattr_wrapper)	/* 235 */
 SYSCALL(sys_gettid,sys_gettid,sys_gettid)
-SYSCALL(sys_tkill,sys_tkill,sys_tkill)
+SYSCALL(sys_tkill,sys_tkill,sys_tkill_wrapper)
 SYSCALL(sys_futex,sys_futex,compat_sys_futex_wrapper)
 SYSCALL(sys_sched_setaffinity,sys_sched_setaffinity,sys32_sched_setaffinity_wrapper)
 SYSCALL(sys_sched_getaffinity,sys_sched_getaffinity,sys32_sched_getaffinity_wrapper)	/* 240 */
-SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill)
+SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill_wrapper)
 NI_SYSCALL							/* reserved for TUX */
 SYSCALL(sys_io_setup,sys_io_setup,sys32_io_setup_wrapper)
 SYSCALL(sys_io_destroy,sys_io_destroy,sys32_io_destroy_wrapper)
@@ -288,7 +288,7 @@
 SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper)
 SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper)
 SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper)
-SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl)		/* 280 */
+SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl_wrapper)		/* 280 */
 SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper)
 SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper)
 SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d649600..fc468ca 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -399,8 +399,10 @@
 
 static void __init time_init_wq(void)
 {
-	if (!time_sync_wq)
-		time_sync_wq = create_singlethread_workqueue("timesync");
+	if (time_sync_wq)
+		return;
+	time_sync_wq = create_singlethread_workqueue("timesync");
+	stop_machine_create();
 }
 
 /*
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 2fb36e4..ecf0304 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -516,8 +516,12 @@
  */
 void init_cpu_vtimer(void)
 {
+	struct thread_info *ti = current_thread_info();
 	struct vtimer_queue *vq;
 
+	S390_lowcore.user_timer = ti->user_timer;
+	S390_lowcore.system_timer = ti->system_timer;
+
 	/* kick the virtual timer */
 	asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
 	asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f32a519..ebabe51 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -644,66 +644,25 @@
 
 menu "Bus options"
 
-# Even on SuperH devices which don't have an ISA bus,
-# this variable helps the PCMCIA modules handle
-# IRQ requesting properly -- Greg Banks.
-#
-# Though we're generally not interested in it when
-# we're not using PCMCIA, so we make it dependent on
-# PCMCIA outright. -- PFM.
-config ISA
-	def_bool y
-	depends on PCMCIA && HD6446X_SERIES
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config SBUS
-	bool
-
 config SUPERHYWAY
 	tristate "SuperHyway Bus support"
 	depends on CPU_SUBTYPE_SH4_202
 
 config MAPLE
-       bool "Maple Bus support"
-       depends on SH_DREAMCAST
-       help
-         The Maple Bus is SEGA's serial communication bus for peripherals
-         on the Dreamcast. Without this bus support you won't be able to
-         get your Dreamcast keyboard etc to work, so most users
-         probably want to say 'Y' here, unless you are only using the
-         Dreamcast with a serial line terminal or a remote network
-         connection.
+	bool "Maple Bus support"
+	depends on SH_DREAMCAST
+	help
+	 The Maple Bus is SEGA's serial communication bus for peripherals
+	 on the Dreamcast. Without this bus support you won't be able to
+	 get your Dreamcast keyboard etc to work, so most users
+	 probably want to say 'Y' here, unless you are only using the
+	 Dreamcast with a serial line terminal or a remote network
+	 connection.
 
 source "arch/sh/drivers/pci/Kconfig"
 
+source "drivers/pci/pcie/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 1c67cba..caf4c33 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -18,8 +18,10 @@
 #include <linux/mtd/sh_flctl.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
@@ -27,12 +29,14 @@
 #include <asm/clock.h>
 #include <cpu/sh7723.h>
 
-static struct smc911x_platdata smc911x_info = {
-	.flags = SMC911X_USE_32BIT,
-	.irq_flags = IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
 };
 
-static struct resource smc9118_resources[] = {
+static struct resource smsc9118_resources[] = {
 	[0] = {
 		.start	= 0xb6080000,
 		.end	= 0xb60fffff,
@@ -45,13 +49,13 @@
 	}
 };
 
-static struct platform_device smc9118_device = {
-	.name		= "smc911x",
+static struct platform_device smsc9118_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc9118_resources),
-	.resource	= smc9118_resources,
+	.num_resources	= ARRAY_SIZE(smsc9118_resources),
+	.resource	= smsc9118_resources,
 	.dev		= {
-		.platform_data = &smc911x_info,
+		.platform_data = &smsc911x_config,
 	},
 };
 
@@ -315,8 +319,22 @@
 	},
 };
 
+struct spi_gpio_platform_data sdcard_cn3_platform_data = {
+	.sck = GPIO_PTD0,
+	.mosi = GPIO_PTD1,
+	.miso = GPIO_PTD2,
+	.num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn3_device = {
+	.name		= "spi_gpio",
+	.dev	= {
+		.platform_data	= &sdcard_cn3_platform_data,
+	},
+};
+
 static struct platform_device *ap325rxa_devices[] __initdata = {
-	&smc9118_device,
+	&smsc9118_device,
 	&ap325rxa_nor_flash_device,
 	&lcdc_device,
 	&ceu_device,
@@ -324,6 +342,7 @@
 	&camera_device,
 #endif
 	&nand_flash_device,
+	&sdcard_cn3_device,
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
@@ -332,6 +351,15 @@
 	},
 };
 
+static struct spi_board_info ap325rxa_spi_devices[] = {
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 5000000,
+		.chip_select = 0,
+		.controller_data = (void *) GPIO_PTD5,
+	},
+};
+
 static int __init ap325rxa_devices_setup(void)
 {
 	/* LD3 and LD4 LEDs */
@@ -429,6 +457,9 @@
 	i2c_register_board_info(0, ap325rxa_i2c_devices,
 				ARRAY_SIZE(ap325rxa_i2c_devices));
 
+	spi_register_board_info(ap325rxa_spi_devices,
+				ARRAY_SIZE(ap325rxa_spi_devices));
+
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 3de22cc..0a37c8b 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/smsc911x.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -242,7 +243,7 @@
 		printk(KERN_WARNING "Ethernet not ready\n");
 }
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0xa8000000,
 		.end		= 0xabffffff,
@@ -255,11 +256,21 @@
 	},
 };
 
-static struct platform_device smc911x_device = {
-	.name		= "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc911x_resources),
-	.resource	= smc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
 };
 
 static struct resource heartbeat_resources[] = {
@@ -360,7 +371,7 @@
 
 static struct platform_device *mpr2_devices[] __initdata = {
 	&heartbeat_device,
-	&smc911x_device,
+	&smsc911x_device,
 	&flash_device,
 };
 
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index 408bbdd..38a6496 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/i2c-algo-pca.h>
+#include <linux/irq.h>
 #include <asm/heartbeat.h>
 #include <mach/sh7785lcr.h>
 
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 806438b..20fe72c 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -18,6 +18,7 @@
 #include <linux/ata_platform.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
+#include <linux/irq.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 48fece7..746742bd 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -12,9 +12,9 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/irq.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <mach/hp6xx.h>
 #include <cpu/dac.h>
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index cc1408119..28e56c5 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -18,9 +18,12 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
 #include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/ov772x.h>
+#include <media/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -292,9 +295,12 @@
 };
 
 static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
 
-static void camera_power_on(void)
+static void camera_power_on(int is_tw)
 {
+	mutex_lock(&camera_lock);
+
 	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
 	 * around signal quality issues on Panel Board V2.1.
 	 */
@@ -304,6 +310,12 @@
 
 	/* use VIO_RST to take camera out of reset */
 	mdelay(10);
+	if (is_tw) {
+		gpio_set_value(GPIO_PTT2, 0);
+		gpio_set_value(GPIO_PTT0, 0);
+	} else {
+		gpio_set_value(GPIO_PTT0, 1);
+	}
 	gpio_set_value(GPIO_PTT3, 0);
 	mdelay(10);
 	gpio_set_value(GPIO_PTT3, 1);
@@ -316,107 +328,29 @@
 	clk_put(camera_clk);
 
 	gpio_set_value(GPIO_PTT3, 0);
+	mutex_unlock(&camera_lock);
 }
 
-static void camera_power(int mode)
+static int ov7725_power(struct device *dev, int mode)
 {
 	if (mode)
-		camera_power_on();
+		camera_power_on(0);
 	else
 		camera_power_off();
+
+	return 0;
 }
 
-#ifdef CONFIG_I2C
-static unsigned char camera_ov772x_magic[] =
+static int tw9910_power(struct device *dev, int mode)
 {
-	0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01,
-	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
-	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
-	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
-	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
-	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
-	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
-	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
-	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
-	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
-	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
-	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
-	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
-	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
-	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
-	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
-	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
-	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
-	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
-	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
-	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
-	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
-	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
-	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
-	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
-	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
-	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
-	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
-	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
-	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
-	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
-	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
-	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
-	0x2c, 0x78,
-};
+	if (mode)
+		camera_power_on(1);
+	else
+		camera_power_off();
 
-static int ov772x_set_capture(struct soc_camera_platform_info *info,
-			      int enable)
-{
-	struct i2c_adapter *a = i2c_get_adapter(0);
-	struct i2c_msg msg;
-	int ret = 0;
-	int i;
-
-	if (!enable)
-		return 0; /* camera_power_off() is enough */
-
-	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
-		u_int8_t buf[8];
-
-		msg.addr = 0x21;
-		msg.buf = buf;
-		msg.len = 2;
-		msg.flags = 0;
-
-		buf[0] = camera_ov772x_magic[i];
-		buf[1] = camera_ov772x_magic[i + 1];
-
-		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
-	}
-
-	return ret;
+	return 0;
 }
 
-static struct soc_camera_platform_info ov772x_info = {
-	.iface = 0,
-	.format_name = "RGB565",
-	.format_depth = 16,
-	.format = {
-		.pixelformat = V4L2_PIX_FMT_RGB565,
-		.colorspace = V4L2_COLORSPACE_SRGB,
-		.width = 320,
-		.height = 240,
-	},
-	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
-	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
-	.power = camera_power,
-	.set_capture = ov772x_set_capture,
-};
-
-static struct platform_device migor_camera_device = {
-	.name		= "soc_camera_platform",
-	.dev	= {
-		.platform_data	= &ov772x_info,
-	},
-};
-#endif /* CONFIG_I2C */
-
 static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
 	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
 	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
@@ -448,16 +382,43 @@
 	},
 };
 
+static struct ov772x_camera_info ov7725_info = {
+	.buswidth  = SOCAM_DATAWIDTH_8,
+	.link = {
+		.power  = ov7725_power,
+	},
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth = SOCAM_DATAWIDTH_8,
+	.mpout    = TW9910_MPO_FIELD,
+	.link = {
+		.power  = tw9910_power,
+	}
+};
+
+struct spi_gpio_platform_data sdcard_cn9_platform_data = {
+	.sck = GPIO_PTD0,
+	.mosi = GPIO_PTD1,
+	.miso = GPIO_PTD2,
+	.num_chipselect = 1,
+};
+
+static struct platform_device sdcard_cn9_device = {
+	.name		= "spi_gpio",
+	.dev	= {
+		.platform_data	= &sdcard_cn9_platform_data,
+	},
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
 	&sh_keysc_device,
 	&migor_lcdc_device,
 	&migor_ceu_device,
-#ifdef CONFIG_I2C
-	&migor_camera_device,
-#endif
 	&migor_nor_flash_device,
 	&migor_nand_flash_device,
+	&sdcard_cn9_device,
 };
 
 static struct i2c_board_info migor_i2c_devices[] = {
@@ -468,6 +429,23 @@
 		I2C_BOARD_INFO("migor_ts", 0x51),
 		.irq = 38, /* IRQ6 */
 	},
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+		.platform_data = &ov7725_info,
+	},
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+		.platform_data = &tw9910_info,
+	},
+};
+
+static struct spi_board_info migor_spi_devices[] = {
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 5000000,
+		.chip_select = 0,
+		.controller_data = (void *) GPIO_PTD5,
+	},
 };
 
 static int __init migor_devices_setup(void)
@@ -592,6 +570,9 @@
 	i2c_register_board_info(0, migor_i2c_devices,
 				ARRAY_SIZE(migor_i2c_devices));
 
+	spi_register_board_info(migor_spi_devices,
+				ARRAY_SIZE(migor_spi_devices));
+
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 73f743b..d8a65ea 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -15,19 +15,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/map.h>
-#include <linux/smc911x.h>
+#include <linux/smsc911x.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <cpu/sh7203.h>
 
-static struct smc911x_platdata smc911x_info = {
-	.flags		= SMC911X_USE_16BIT,
-	.irq_flags	= IRQF_TRIGGER_LOW,
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
 };
 
-static struct resource smc911x_resources[] = {
+static struct resource smsc911x_resources[] = {
 	[0] = {
 		.start		= 0x24000000,
 		.end		= 0x24000000 + 0x100,
@@ -40,13 +42,13 @@
 	},
 };
 
-static struct platform_device smc911x_device = {
-	.name		= "smc911x",
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc911x_resources),
-	.resource	= smc911x_resources,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
 	.dev		= {
-		.platform_data = &smc911x_info,
+		.platform_data = &smsc911x_config,
 	},
 };
 
@@ -87,7 +89,7 @@
 };
 
 static struct platform_device *rsk7203_devices[] __initdata = {
-	&smc911x_device,
+	&smsc911x_device,
 	&led_device,
 };
 
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index a70d23b..a340492 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/smc91x.h>
+#include <linux/irq.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 874dd97..5c423fa 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 18:20:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -75,12 +77,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -90,7 +90,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +97,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +116,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +129,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -192,7 +194,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -269,7 +270,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -293,11 +293,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +376,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -447,6 +455,8 @@
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -472,7 +482,15 @@
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -487,7 +505,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -530,6 +550,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -541,13 +562,34 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -630,6 +672,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -637,19 +680,102 @@
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -658,8 +784,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -668,13 +799,47 @@
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -682,7 +847,34 @@
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -694,14 +886,103 @@
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
 # CONFIG_DMADEVICES is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
@@ -768,10 +1049,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -780,6 +1058,7 @@
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -878,13 +1157,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -900,11 +1185,14 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -987,12 +1275,13 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig
index e21c0e8..9289501 100644
--- a/arch/sh/configs/cayman_defconfig
+++ b/arch/sh/configs/cayman_defconfig
@@ -700,8 +700,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index be4c2e0..2d86e04 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:18:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:54:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -78,7 +80,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -195,7 +198,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -290,7 +292,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -310,6 +311,7 @@
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -322,11 +324,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -379,6 +388,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -394,8 +404,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -434,6 +444,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -477,6 +488,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -492,7 +504,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -506,6 +517,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -611,6 +623,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -643,11 +656,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -657,7 +670,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,6 +745,7 @@
 # CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -788,9 +802,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -847,10 +862,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -901,13 +913,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -923,6 +941,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1006,6 +1025,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 8f4329f..461bfb35 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Wed Dec 17 13:53:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -64,7 +64,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -72,11 +71,14 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 # CONFIG_BLOCK is not set
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -151,7 +153,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -362,7 +363,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -382,10 +382,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_NLS is not set
 
 #
@@ -426,6 +423,7 @@
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 1580068..14d4b35 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:20:09 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:55:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,13 +78,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -128,6 +130,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -191,7 +194,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -272,7 +274,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -298,11 +299,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -353,6 +361,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -368,8 +377,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +519,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -592,6 +602,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -632,8 +643,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -651,11 +662,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -664,9 +675,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -693,15 +707,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -716,6 +731,7 @@
 # CONFIG_FB_SH7760 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -737,6 +753,7 @@
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
 # CONFIG_SND_VERBOSE_PROCFS is not set
@@ -753,6 +770,7 @@
 #
 # SoC Audio support for SuperH
 #
+CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 # CONFIG_HID_SUPPORT is not set
@@ -823,10 +841,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -950,6 +965,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -958,17 +974,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
@@ -978,7 +1002,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -994,7 +1020,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1077,6 +1107,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 1032b23..847a251 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:23:53 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:56:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,7 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_SYS_SUPPORTS_PM=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -70,12 +71,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -85,13 +84,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -108,6 +105,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_FREEZER=y
 
 #
@@ -115,6 +116,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -178,7 +180,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -236,7 +237,6 @@
 #
 CONFIG_HD6446X_SERIES=y
 CONFIG_HD64461=y
-# CONFIG_HD64465 is not set
 CONFIG_HD64461_IRQ=36
 CONFIG_HD64461_IOBASE=0xb0000000
 CONFIG_HD64461_ENABLER=y
@@ -275,7 +275,6 @@
 #
 # Bus options
 #
-CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
@@ -286,9 +285,6 @@
 #
 # PC-card bridges
 #
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 
 #
 # Executable file formats
@@ -301,13 +297,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -326,7 +322,6 @@
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
-# CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
@@ -336,6 +331,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -375,18 +371,7 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -395,10 +380,7 @@
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
 # CONFIG_MD is not set
 # CONFIG_PHONE is not set
@@ -438,11 +420,11 @@
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
@@ -484,11 +466,11 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
@@ -499,7 +481,6 @@
 # CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
 # CONFIG_W1 is not set
@@ -508,11 +489,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -522,7 +503,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -552,11 +533,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -571,6 +553,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 # CONFIG_LCD_ILI9320 is not set
@@ -587,7 +570,6 @@
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
@@ -701,10 +683,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -785,13 +764,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -807,11 +792,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -893,6 +882,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index b82dfb4..d3bbbb0 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:25:51 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 16:58:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,6 +287,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -401,6 +411,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -416,8 +427,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -462,6 +473,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -478,7 +490,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -508,6 +519,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -560,6 +572,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -573,6 +586,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -634,6 +649,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,7 +665,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -659,6 +674,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -687,6 +703,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -695,6 +712,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -791,6 +809,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -832,11 +851,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -846,7 +865,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -952,11 +971,9 @@
 CONFIG_HID_A4TECH=m
 CONFIG_HID_APPLE=m
 CONFIG_HID_BELKIN=m
-CONFIG_HID_BRIGHT=m
 CONFIG_HID_CHERRY=m
 CONFIG_HID_CHICONY=m
 CONFIG_HID_CYPRESS=m
-CONFIG_HID_DELL=m
 CONFIG_HID_EZKEY=m
 CONFIG_HID_GYRATION=m
 CONFIG_HID_LOGITECH=m
@@ -964,12 +981,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=m
 CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=m
 CONFIG_HID_SAMSUNG=m
 CONFIG_HID_SONY=m
 CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -990,6 +1010,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1007,6 +1029,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1017,11 +1041,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1119,6 +1143,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1192,10 +1217,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1302,14 +1324,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1325,6 +1353,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1408,6 +1437,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c3ecedf..d5c5a1d 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:29:42 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:02:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,7 +88,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +95,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +114,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +125,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -286,6 +288,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
@@ -315,11 +318,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -399,6 +409,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -414,8 +425,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -459,6 +470,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -501,6 +513,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -514,6 +527,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -627,6 +642,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -642,7 +658,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -656,6 +671,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -684,6 +700,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -692,6 +709,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -787,6 +805,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -828,11 +847,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -842,7 +861,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -902,9 +921,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1007,10 +1027,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1100,14 +1117,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1123,6 +1146,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1206,6 +1230,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index 499ed72..125d801 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:32:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:03:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -58,6 +60,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -74,12 +77,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -296,11 +298,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -351,6 +360,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +376,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -483,6 +493,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -502,13 +513,33 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -618,6 +649,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -627,17 +659,37 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -647,7 +699,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -778,10 +830,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -912,6 +961,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -920,16 +970,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -939,25 +997,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-CONFIG_SH_KGDB=y
-
-#
-# KGDB configuration options
-#
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
 # CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-CONFIG_KGDB_SYSRQ=y
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=0
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
 
 #
 # Security options
@@ -972,6 +1014,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index b8ada8c..5a1c048 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:37:41 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:06:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -87,13 +87,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +108,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +119,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +189,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -265,7 +267,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -292,11 +293,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -351,6 +359,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -366,8 +375,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -400,12 +409,14 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -445,6 +456,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -503,6 +515,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -530,11 +543,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -544,7 +557,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -588,7 +601,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -656,10 +669,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -761,13 +771,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -783,11 +799,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -869,6 +889,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 30cac42..7758263 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Oct 31 15:58:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:09:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -196,7 +201,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -299,11 +303,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -359,6 +370,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -375,8 +387,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -493,7 +505,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -536,6 +550,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -554,6 +569,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -644,6 +660,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -684,8 +701,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -697,17 +714,39 @@
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -716,10 +755,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -762,8 +804,11 @@
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
 # CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
 CONFIG_SOC_CAMERA_PLATFORM=y
+# CONFIG_SOC_CAMERA_OV772X is not set
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
@@ -806,7 +851,7 @@
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -872,6 +917,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -948,10 +994,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1008,19 +1051,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1035,12 +1088,13 @@
 # Crypto core or helper
 #
 # CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1123,6 +1177,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 2e65149..65b01a9 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 20:03:46 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:10:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -85,6 +87,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -96,7 +99,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +106,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -125,6 +125,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -133,6 +137,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -203,7 +208,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -284,7 +288,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +305,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +319,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -382,6 +393,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -398,8 +410,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -442,8 +454,10 @@
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -486,6 +500,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -499,6 +514,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -611,6 +628,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -626,7 +644,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -640,6 +657,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
@@ -669,6 +687,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -677,6 +696,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -771,6 +791,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -836,8 +857,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -861,6 +882,7 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -909,11 +931,11 @@
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -922,9 +944,12 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -982,9 +1007,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1020,6 +1046,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1106,10 +1133,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1228,6 +1252,7 @@
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -1236,6 +1261,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1244,16 +1270,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1262,7 +1300,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1278,11 +1318,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1366,6 +1410,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 043a8a5..8defaa5 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 16:25:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:14:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,9 +13,11 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -63,6 +65,7 @@
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,6 +87,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -97,7 +101,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -105,11 +108,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,6 +127,11 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -135,6 +141,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -211,7 +218,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -307,8 +313,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -326,6 +330,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
@@ -339,11 +344,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -406,6 +418,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -423,8 +436,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -467,8 +480,10 @@
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -511,6 +526,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -524,6 +540,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -636,6 +654,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -671,6 +690,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -679,6 +699,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -732,6 +753,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -773,6 +795,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -812,6 +835,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -838,8 +862,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -851,6 +875,30 @@
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -863,6 +911,7 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
@@ -911,11 +960,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -924,9 +973,13 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -954,15 +1007,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1000,6 +1054,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1034,9 +1089,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1072,6 +1128,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1158,10 +1215,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1291,6 +1345,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1300,16 +1355,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1318,7 +1385,9 @@
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1334,11 +1403,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1422,6 +1495,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 014c18c..64ee69e 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:48:02 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:19:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -77,6 +77,7 @@
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -87,18 +88,15 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -185,7 +187,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -563,7 +564,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -606,10 +606,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -658,22 +655,28 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -688,6 +691,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index dcdef31..8d7a597 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Mon Dec  8 14:35:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:20:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -62,6 +62,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,6 +82,7 @@
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -91,18 +93,15 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +118,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -313,6 +315,8 @@
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -361,6 +365,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -376,8 +381,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -509,13 +514,33 @@
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
-CONFIG_SMC911X=y
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -611,6 +636,26 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -685,11 +730,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -697,12 +740,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -847,7 +893,6 @@
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -890,10 +935,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -961,6 +1003,7 @@
 # CONFIG_DEBUG_OBJECTS_SELFTEST is not set
 # CONFIG_DEBUG_OBJECTS_FREE is not set
 # CONFIG_DEBUG_OBJECTS_TIMERS is not set
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -970,6 +1013,7 @@
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -978,6 +1022,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -986,9 +1031,12 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -997,9 +1045,13 @@
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
@@ -1008,6 +1060,9 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1022,6 +1077,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 7d2a9e8..d6680f4 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:44:36 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:23:15 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index f680d3e..3fca10e 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:47:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:10 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -77,6 +79,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -89,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -124,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -187,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +297,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -308,11 +313,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -365,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -381,8 +394,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -426,6 +439,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +482,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -481,6 +496,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -593,6 +610,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -608,7 +626,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -622,6 +639,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -650,6 +668,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -658,6 +677,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -755,6 +775,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -777,7 +798,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -805,11 +826,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -819,7 +840,7 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -852,11 +873,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -895,6 +917,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1031,11 +1054,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1043,12 +1064,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1069,6 +1093,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1084,6 +1110,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1094,11 +1122,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1151,6 +1179,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1176,6 +1205,7 @@
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1254,10 +1284,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1343,19 +1370,29 @@
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1371,6 +1408,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1454,6 +1492,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 543287b..5d6b067 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:53:22 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:26:40 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -81,7 +84,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -92,7 +94,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +101,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +120,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -129,6 +132,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,7 +285,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,6 +302,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 CONFIG_PCI_DEBUG=y
@@ -334,11 +337,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -434,6 +444,7 @@
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -449,6 +460,7 @@
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -464,8 +476,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -516,6 +528,7 @@
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_IDE_GD=y
 CONFIG_IDE_GD_ATA=y
@@ -525,7 +538,6 @@
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -553,6 +565,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -619,6 +632,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -742,6 +757,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -826,6 +842,7 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -875,6 +892,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
@@ -905,11 +923,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -929,7 +947,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -957,15 +975,16 @@
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1003,6 +1022,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1054,11 +1074,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1066,12 +1084,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1092,6 +1113,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1106,6 +1129,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1116,11 +1141,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1176,6 +1201,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1260,10 +1286,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1392,6 +1415,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1400,17 +1424,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1419,7 +1451,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1435,7 +1469,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1519,6 +1557,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 25717ff..e5b55b6 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 18:57:39 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:31:27 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -69,6 +71,7 @@
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -84,11 +87,11 @@
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -99,7 +102,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -107,11 +109,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -128,6 +128,11 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +141,7 @@
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SH2A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 CONFIG_CPU_SUBTYPE_SH7206=y
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -197,7 +203,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -281,8 +286,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -296,10 +299,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -312,11 +311,19 @@
 CONFIG_BINFMT_SHARED_FLAT=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -372,6 +379,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -387,8 +395,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -500,6 +508,7 @@
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -526,6 +535,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -598,11 +608,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -612,7 +622,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -732,10 +742,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -812,6 +819,7 @@
 # CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -820,6 +828,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,20 +836,35 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -856,7 +880,11 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -890,7 +918,7 @@
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -939,6 +967,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index be246f3..3900525 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc6
-# Thu Dec  4 16:40:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:33:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -78,7 +80,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,7 +89,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -96,11 +96,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -117,6 +115,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -190,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +291,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -347,6 +354,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -362,8 +370,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -661,8 +669,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -693,6 +701,7 @@
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -743,11 +752,13 @@
 # CONFIG_USB_VIDEO_CLASS is not set
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
@@ -786,6 +797,7 @@
 # CONFIG_USB_DSBR is not set
 # CONFIG_USB_SI470X is not set
 # CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
 
 #
@@ -797,15 +809,16 @@
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -881,11 +894,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -893,12 +904,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -997,7 +1011,6 @@
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
 # CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -1051,10 +1064,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1138,11 +1148,12 @@
 #
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1158,6 +1169,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1240,6 +1252,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index db9cacd..932b023 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:03:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:36:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 # CONFIG_GENERIC_TIME is not set
 # CONFIG_GENERIC_CLOCKEVENTS is not set
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -61,12 +63,10 @@
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
@@ -74,12 +74,10 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -96,6 +94,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -103,6 +105,7 @@
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -164,7 +167,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -244,7 +246,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -256,6 +257,12 @@
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -359,6 +366,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -439,11 +447,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -453,7 +461,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -506,7 +514,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -557,10 +565,7 @@
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -602,12 +607,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -621,6 +633,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index d88190f..8574d6e 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:04:52 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:37:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -83,17 +83,14 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -110,6 +107,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -117,6 +118,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -180,7 +182,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -258,7 +259,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -272,10 +272,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -285,11 +281,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -345,6 +348,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -360,8 +364,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -465,6 +469,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -491,6 +496,7 @@
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +589,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
@@ -609,11 +616,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -623,7 +630,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -677,7 +684,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -734,10 +741,7 @@
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -806,13 +810,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -827,6 +837,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -909,6 +920,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 869ab17..e31ea84 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:08:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:40:12 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -55,6 +57,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -71,12 +74,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -87,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -115,6 +113,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -122,6 +124,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -277,10 +279,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -291,11 +289,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -376,6 +381,7 @@
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -394,6 +400,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -410,8 +417,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -518,6 +525,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -560,6 +568,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -591,6 +600,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -600,6 +612,7 @@
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -658,6 +671,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
@@ -672,11 +686,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -686,7 +700,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -730,7 +744,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -748,6 +762,7 @@
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -809,10 +824,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -902,6 +914,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -910,16 +923,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -927,7 +948,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -943,11 +966,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1030,6 +1058,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index b52be140..ad1bace 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:12:06 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:43:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -59,6 +61,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -75,12 +78,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -91,18 +92,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,10 +282,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -294,11 +292,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -379,6 +384,7 @@
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -397,6 +403,7 @@
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +420,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -522,6 +529,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -673,6 +681,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -686,11 +695,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -700,7 +709,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -750,11 +759,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -762,12 +769,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -788,19 +798,21 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -811,11 +823,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -883,6 +895,7 @@
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
@@ -947,10 +960,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1063,6 +1073,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1071,16 +1082,24 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1088,7 +1107,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1104,11 +1125,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1191,6 +1217,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index e6df51f..abb189a 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:15:10 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:46:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -75,13 +77,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -93,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,11 +100,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -122,6 +119,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +133,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -207,7 +209,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,7 +288,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -300,10 +300,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -314,11 +310,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -371,6 +374,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -386,8 +390,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -420,6 +424,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,6 +467,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -485,6 +491,7 @@
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -577,6 +584,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +612,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +626,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -672,7 +680,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -774,10 +782,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -831,14 +836,20 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -854,6 +865,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -936,6 +948,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index a577099..ac874f6 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:17:29 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:49:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -278,10 +279,6 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -291,11 +288,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -352,6 +356,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -367,8 +372,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -469,6 +474,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -481,7 +487,6 @@
 # CONFIG_IDE_GD_ATAPI is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -530,6 +535,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -548,6 +554,7 @@
 CONFIG_STNIC=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -610,6 +617,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -645,11 +653,11 @@
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_SH_WDT=y
 # CONFIG_SH_WDT_MMAP is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -659,7 +667,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -703,7 +711,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -761,10 +769,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -847,13 +852,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -869,6 +880,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -951,6 +963,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index d99a6bd..f54ae05 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:21:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:51:47 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -72,12 +74,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -88,18 +88,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -116,6 +113,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -123,6 +124,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -186,7 +188,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -280,7 +281,6 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
@@ -290,11 +290,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -370,6 +377,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -385,8 +393,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -490,6 +498,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -516,6 +525,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -570,6 +580,7 @@
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -604,11 +615,11 @@
 #
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_SH_WDT is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -618,7 +629,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -662,7 +673,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -722,10 +733,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -787,13 +795,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -809,6 +823,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -891,6 +906,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index ad95b80..7504978 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:27:30 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:53:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -74,7 +76,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -84,18 +85,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -111,6 +109,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -119,6 +121,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -185,7 +188,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -274,11 +276,11 @@
 #
 # Bus options
 #
-# CONFIG_CF_ENABLER is not set
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -294,6 +296,7 @@
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -349,6 +352,7 @@
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -363,8 +367,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
 #
@@ -533,6 +537,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -569,11 +575,13 @@
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
 # CONFIG_PATA_EFAR is not set
 # CONFIG_ATA_GENERIC is not set
 # CONFIG_PATA_HPT366 is not set
@@ -585,10 +593,15 @@
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
 # CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -627,6 +640,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -639,6 +655,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -654,7 +671,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -663,6 +679,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -754,6 +771,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -779,11 +797,11 @@
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -793,7 +811,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -821,15 +839,16 @@
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=m
-CONFIG_FB_CFB_COPYAREA=m
-CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -865,6 +884,7 @@
 CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -912,11 +932,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -924,12 +942,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -949,6 +970,7 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -974,11 +996,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1094,10 +1116,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
@@ -1188,13 +1207,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1210,6 +1235,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
@@ -1288,6 +1314,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 95f0f5d..04bde1e 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:31:54 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 17:56:46 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,6 +81,7 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
@@ -91,7 +94,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -99,11 +101,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -120,6 +120,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -127,6 +131,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -190,7 +195,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,7 +272,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -284,14 +287,11 @@
 #
 # Bus options
 #
-CONFIG_CF_ENABLER=y
-CONFIG_CF_AREA5=y
-# CONFIG_CF_AREA6 is not set
-CONFIG_CF_BASE_ADDR=0xb4000000
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
@@ -307,11 +307,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -369,6 +376,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -384,8 +392,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -427,6 +435,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -441,7 +450,6 @@
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=m
-# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -466,6 +474,7 @@
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
 # CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
@@ -519,6 +528,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +542,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -583,6 +595,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -598,7 +611,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -608,6 +620,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -636,6 +649,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -644,6 +658,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -734,6 +749,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -782,11 +798,11 @@
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -796,7 +812,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -856,9 +872,10 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -883,6 +900,7 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -930,10 +948,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1048,21 +1063,31 @@
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1078,11 +1103,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1166,6 +1195,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 9a768b2..1b869f4 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:35:18 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:00:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -74,12 +76,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -89,7 +89,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -97,11 +96,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,6 +115,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -125,6 +126,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -188,7 +190,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -287,11 +288,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -378,6 +386,7 @@
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
 
 #
 # Classification
@@ -398,6 +407,7 @@
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_IND is not set
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -413,8 +423,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -519,6 +529,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,6 +557,7 @@
 # CONFIG_SH_ETH is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -638,11 +650,11 @@
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -652,7 +664,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -706,7 +718,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -763,10 +775,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -828,13 +837,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -850,6 +865,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -932,6 +948,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 6a77f69..ba33aca 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:37:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:02:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -79,11 +81,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -96,18 +98,15 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,6 +123,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -132,6 +135,7 @@
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -199,7 +203,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -297,11 +300,19 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -357,6 +368,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -373,8 +385,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -529,6 +541,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -555,6 +568,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -564,6 +580,7 @@
 CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -655,6 +672,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -670,11 +688,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -684,7 +702,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -737,6 +755,7 @@
 CONFIG_FB_SH7760=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -781,19 +800,21 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -804,11 +825,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -897,6 +918,7 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -942,10 +964,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1038,20 +1057,30 @@
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1067,6 +1096,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1149,6 +1179,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC_T10DIF=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 07e33c2..1d63628 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:49:23 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:05:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -86,7 +88,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -98,7 +99,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -106,11 +106,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,6 +125,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -136,6 +138,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -285,7 +287,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -302,6 +303,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -315,11 +317,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -380,6 +389,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -396,8 +406,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -757,6 +767,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -823,8 +834,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -842,11 +853,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -855,9 +866,12 @@
 # CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -889,11 +903,12 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -932,6 +947,7 @@
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -976,11 +992,9 @@
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -988,12 +1002,15 @@
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 CONFIG_THRUSTMASTER_FF=m
 CONFIG_ZEROPLUS_FF=m
 CONFIG_USB_SUPPORT=y
@@ -1014,6 +1031,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1031,6 +1050,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1041,11 +1062,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1100,6 +1121,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1135,6 +1157,7 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1220,10 +1243,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1353,6 +1373,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1361,17 +1382,25 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1379,7 +1408,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1395,11 +1426,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1482,6 +1517,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index e2b38a3..8ba10e1 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:52:59 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:09:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -15,6 +15,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -65,12 +67,10 @@
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -78,12 +78,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -100,6 +98,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -107,6 +109,7 @@
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -170,7 +173,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -268,11 +270,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -327,6 +336,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +352,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -448,6 +458,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -474,6 +485,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -532,6 +544,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -547,11 +560,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -561,7 +574,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -605,7 +618,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -660,10 +673,7 @@
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -723,14 +733,20 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -745,6 +761,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -826,6 +843,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index ae5cbe2..ed90a7e 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Tue Oct 21 12:16:25 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:10:57 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -18,6 +18,8 @@
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_LOCKBREAK=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
@@ -79,6 +81,7 @@
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_STRIP_GENERATED=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -95,11 +98,11 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -113,7 +116,6 @@
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -121,12 +123,10 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -143,6 +143,11 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_PREEMPT_RCU_TRACE=y
 CONFIG_FREEZER=y
 
 #
@@ -152,6 +157,7 @@
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -230,7 +236,6 @@
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -323,8 +328,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_RCU_TRACE=y
 
 #
 # Boot options
@@ -347,11 +350,19 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
@@ -424,6 +435,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -479,7 +491,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -522,6 +536,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -546,6 +561,7 @@
 CONFIG_SMC91X=y
 # CONFIG_ENC28J60 is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -613,6 +629,7 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -653,8 +670,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
@@ -678,7 +695,7 @@
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
+# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
@@ -699,11 +716,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -715,6 +732,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -763,15 +781,17 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_HWA_HCD is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
@@ -783,11 +803,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
@@ -890,12 +910,14 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -981,10 +1003,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1049,6 +1068,7 @@
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1057,6 +1077,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1066,16 +1087,28 @@
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
@@ -1083,7 +1116,9 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1099,6 +1134,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1181,6 +1217,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index b4ca511..98377e5 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:55:03 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:14:08 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -76,7 +78,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -86,13 +87,11 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -109,6 +108,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -116,6 +119,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -179,7 +183,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -282,6 +285,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 
@@ -292,11 +296,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 # CONFIG_NET_KEY is not set
@@ -342,6 +353,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -357,8 +369,8 @@
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -515,6 +527,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -530,7 +543,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -544,6 +556,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -624,6 +637,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -641,11 +655,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -655,7 +669,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -689,6 +703,7 @@
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -746,10 +761,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -801,13 +813,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -822,6 +840,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 1711f0f..72703bf 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:56:48 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:15:56 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -68,12 +70,10 @@
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -84,7 +84,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -92,11 +91,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -113,6 +110,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -120,6 +121,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -183,7 +185,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -264,7 +265,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -288,6 +288,12 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
 #
@@ -314,6 +320,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -360,6 +367,7 @@
 #
 # CONFIG_SERIAL_SH_SCI is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -387,11 +395,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -401,7 +409,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -444,7 +452,7 @@
 #
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
@@ -501,10 +509,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -546,13 +551,19 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -567,6 +578,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ea3c5e8..01fc1de 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27
-# Wed Oct 22 19:58:12 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:17:19 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -79,7 +81,6 @@
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -90,7 +91,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,11 +98,9 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -119,6 +117,10 @@
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -126,6 +128,7 @@
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -189,7 +192,6 @@
 CONFIG_SPARSEMEM_STATIC=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -293,6 +295,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
@@ -309,11 +312,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -507,6 +517,7 @@
 CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_DRR is not set
 CONFIG_NET_SCH_INGRESS=m
 
 #
@@ -543,6 +554,7 @@
 # CONFIG_NET_ACT_SKBEDIT is not set
 CONFIG_NET_CLS_IND=y
 CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -560,12 +572,8 @@
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -695,6 +703,7 @@
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -738,6 +747,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -751,6 +761,8 @@
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -807,6 +819,9 @@
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -818,6 +833,7 @@
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -833,7 +849,6 @@
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -847,6 +862,7 @@
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
@@ -875,6 +891,7 @@
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
 # CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
@@ -883,6 +900,7 @@
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
@@ -1002,6 +1020,7 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
@@ -1055,11 +1074,11 @@
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -1069,7 +1088,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -1145,6 +1164,8 @@
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1162,6 +1183,8 @@
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1172,11 +1195,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1273,6 +1296,7 @@
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1379,10 +1403,7 @@
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1530,6 +1551,7 @@
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -1537,16 +1559,24 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_DEBUG_BOOTMEM is not set
@@ -1554,7 +1584,9 @@
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1570,11 +1602,16 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1659,6 +1696,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 9afff67..27f968a 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 17:35:17 2008
+# Linux kernel version: 2.6.28
+# Fri Jan  9 18:22:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -16,6 +16,8 @@
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -80,7 +82,6 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -92,7 +93,6 @@
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -100,11 +100,9 @@
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -121,6 +119,10 @@
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -131,6 +133,7 @@
 CONFIG_CPU_SH4AL_DSP=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
@@ -206,7 +209,6 @@
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
@@ -283,7 +285,6 @@
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -307,11 +308,18 @@
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -367,6 +375,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -380,10 +389,12 @@
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
 CONFIG_MAC80211=y
 
 #
@@ -397,11 +408,6 @@
 # CONFIG_MAC80211_MESH is not set
 # CONFIG_MAC80211_LEDS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -510,6 +516,7 @@
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -552,6 +559,7 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
@@ -575,6 +583,7 @@
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 # CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -714,11 +723,11 @@
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -728,6 +737,7 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -785,7 +795,6 @@
 #
 # CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
@@ -800,11 +809,11 @@
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -937,10 +946,7 @@
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1046,13 +1052,19 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_SH_KGDB is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
 
 #
 # Security options
@@ -1068,11 +1080,15 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1155,6 +1171,7 @@
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
index 0a3d2f5..2172732 100644
--- a/arch/sh/include/asm/posix_types_32.h
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -39,14 +39,10 @@
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
 	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef	__FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -117,6 +113,6 @@
 	}
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
index 0620317..f83e9bd 100644
--- a/arch/sh/include/asm/posix_types_64.h
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -48,14 +48,10 @@
 #endif
 
 typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
 	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
 } __kernel_fsid_t;
 
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#if defined(__KERNEL__)
 
 #undef	__FD_SET
 static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
@@ -126,6 +122,6 @@
 	}
 }
 
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+#endif /* defined(__KERNEL__) */
 
 #endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 0623e37..4ff4dc6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -112,6 +112,34 @@
 	.num_resources	= ARRAY_SIZE(veu_resources),
 };
 
+static struct uio_info jpu_platform_data = {
+	.name = "JPU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource jpu_resources[] = {
+	[0] = {
+		.name	= "JPU",
+		.start	= 0xfea00000,
+		.end	= 0xfea102d3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device jpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &jpu_platform_data,
+	},
+	.resource	= jpu_resources,
+	.num_resources	= ARRAY_SIZE(jpu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -152,6 +180,7 @@
 	&sci_device,
 	&vpu_device,
 	&veu_device,
+	&jpu_device,
 };
 
 static int __init sh7343_devices_setup(void)
@@ -160,9 +189,11 @@
 	clk_always_enable("xymem0"); /* XYMEM */
 	clk_always_enable("veu0"); /* VEU */
 	clk_always_enable("vpu0"); /* VPU */
+	clk_always_enable("jpu0"); /* JPU */
 
 	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
 	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+	platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
 
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 50cf683..5146afc 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -158,7 +158,7 @@
 	[0] = {
 		.name	= "JPU",
 		.start	= 0xfea00000,
-		.end	= 0xfea102d0,
+		.end	= 0xfea102d3,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index a7e5f2e..c90c7e5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -520,7 +520,6 @@
 	int error;
 	char *filename;
 
-	lock_kernel();
 	filename = getname((char __user *)ufilename);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
@@ -537,7 +536,6 @@
 	}
 	putname(filename);
 out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index c0aa3d8..60dcf87 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -125,20 +125,18 @@
  * - userspace errors just cause EFAULT to be returned, resulting in SEGV
  * - kernel/userspace interfaces cause a jump to an appropriate handler
  * - other kernel errors are bad
- * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault
  */
-static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
+static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err)
 {
 	if (!user_mode(regs)) {
 		const struct exception_table_entry *fixup;
 		fixup = search_exception_tables(regs->pc);
 		if (fixup) {
 			regs->pc = fixup->fixup;
-			return 0;
+			return;
 		}
 		die(str, regs, err);
 	}
-	return -EFAULT;
 }
 
 static inline void sign_extend(unsigned int count, unsigned char *dst)
@@ -314,7 +312,8 @@
 	/* Argh. Address not only misaligned but also non-existent.
 	 * Raise an EFAULT and see if it's trapped
 	 */
-	return die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+	die_if_no_fixup("Fault in unaligned fixup", regs, 0);
+	return -EFAULT;
 }
 
 /*
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index 6e0be24..31e1bb5 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -71,9 +71,9 @@
 	 * Ok, go for it..
 	 */
 	area = get_vm_area(size, VM_IOREMAP);
-	pr_debug("Get vm_area returns %p addr %p\n",area,area->addr);
 	if (!area)
 		return NULL;
+	pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
 	area->phys_addr = phys_addr;
 	addr = area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index de58c02..c3ea215 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -36,6 +36,7 @@
 	select HAVE_KRETPROBES
 	select HAVE_KPROBES
 	select HAVE_LMB
+	select HAVE_SYSCALL_WRAPPERS
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select RTC_DRV_CMOS
 	select RTC_DRV_BQ4802
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index cde19ae..ade4994 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -867,8 +867,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c
index 05f1c91..f3b5466 100644
--- a/arch/sparc/kernel/central.c
+++ b/arch/sparc/kernel/central.c
@@ -103,6 +103,7 @@
 	p->leds_resource.name = "leds";
 
 	p->leds_pdev.name = "sunfire-clockboard-leds";
+	p->leds_pdev.id = -1;
 	p->leds_pdev.resource = &p->leds_resource;
 	p->leds_pdev.num_resources = 1;
 	p->leds_pdev.dev.parent = &op->dev;
@@ -197,6 +198,7 @@
 		p->leds_resource.name = "leds";
 
 		p->leds_pdev.name = "sunfire-fhc-leds";
+		p->leds_pdev.id = p->board_num;
 		p->leds_pdev.resource = &p->leds_resource;
 		p->leds_pdev.num_resources = 1;
 		p->leds_pdev.dev.parent = &op->dev;
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index f0b8255..32d32b4 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -239,14 +239,26 @@
 
 static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers)
 {
+	const struct manufacturer_info *manuf;
+	int i;
+
 	sparc_cpu_type = NULL;
 	sparc_fpu_type = NULL;
-	if (psr_impl < ARRAY_SIZE(manufacturer_info))
+	manuf = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
+	{
+		if (psr_impl == manufacturer_info[i].psr_impl) {
+			manuf = &manufacturer_info[i];
+			break;
+		}
+	}
+	if (manuf != NULL)
 	{
 		const struct cpu_info *cpu;
 		const struct fpu_info *fpu;
 
-		cpu = &manufacturer_info[psr_impl].cpu_info[0];
+		cpu = &manuf->cpu_info[0];
 		while (cpu->psr_vers != -1)
 		{
 			if (cpu->psr_vers == psr_vers) {
@@ -256,7 +268,7 @@
 			}
 			cpu++;
 		}
-		fpu =  &manufacturer_info[psr_impl].fpu_info[0];
+		fpu =  &manuf->fpu_info[0];
 		while (fpu->fp_vers != -1)
 		{
 			if (fpu->fp_vers == fpu_vers) {
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 09058fc..e2d1024 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -399,7 +399,7 @@
 	}
 }
 
-asmlinkage unsigned long sparc_brk(unsigned long brk)
+SYSCALL_DEFINE1(sparc_brk, unsigned long, brk)
 {
 	/* People could try to be nasty and use ta 0x6d in 32bit programs */
 	if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32)
@@ -415,7 +415,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way unix traditionally does this, though.
  */
-asmlinkage long sparc_pipe(struct pt_regs *regs)
+SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs)
 {
 	int fd[2];
 	int error;
@@ -435,8 +435,8 @@
  * This is really horribly ugly.
  */
 
-asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
-			unsigned long third, void __user *ptr, long fifth)
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
+		unsigned long, third, void __user *, ptr, long, fifth)
 {
 	long err;
 
@@ -519,7 +519,7 @@
 	return err;
 }
 
-asmlinkage long sparc64_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name)
 {
 	int ret = sys_newuname(name);
 	
@@ -530,7 +530,7 @@
 	return ret;
 }
 
-asmlinkage long sparc64_personality(unsigned long personality)
+SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
 	int ret;
 
@@ -564,9 +564,9 @@
 }
 
 /* Linux version of mmap */
-asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags, unsigned long fd,
-	unsigned long off)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+		unsigned long, prot, unsigned long, flags, unsigned long, fd,
+		unsigned long, off)
 {
 	struct file * file = NULL;
 	unsigned long retval = -EBADF;
@@ -589,7 +589,7 @@
 	return retval;
 }
 
-asmlinkage long sys64_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len)
 {
 	long ret;
 
@@ -606,9 +606,9 @@
 	unsigned long old_len, unsigned long new_len,
 	unsigned long flags, unsigned long new_addr);
                 
-asmlinkage unsigned long sys64_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(64_mremap, unsigned long, addr,	unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret = -EINVAL;
 
@@ -671,7 +671,7 @@
 
 extern void check_pending(int signum);
 
-asmlinkage long sys_getdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
 {
         int nlen, err;
 
@@ -694,11 +694,10 @@
 	return err;
 }
 
-asmlinkage long sys_utrap_install(utrap_entry_t type,
-				  utrap_handler_t new_p,
-				  utrap_handler_t new_d,
-				  utrap_handler_t __user *old_p,
-				  utrap_handler_t __user *old_d)
+SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type,
+		utrap_handler_t, new_p, utrap_handler_t, new_d,
+		utrap_handler_t __user *, old_p,
+		utrap_handler_t __user *, old_d)
 {
 	if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31)
 		return -EINVAL;
@@ -764,11 +763,9 @@
 	return 0;
 }
 
-asmlinkage long sys_rt_sigaction(int sig,
-				 const struct sigaction __user *act,
-				 struct sigaction __user *oact,
-				 void __user *restorer,
-				 size_t sigsetsize)
+SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
+		struct sigaction __user *, oact, void __user *, restorer,
+		size_t, sigsetsize)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -808,7 +805,8 @@
 	reset_pic();
 }
 
-asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
+		unsigned long, arg1, unsigned long, arg2)
 {
 	int err = 0;
 
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 87f5a3b..d150c2a 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -21,7 +21,7 @@
 
 	.align	32
 sys_sparc_pipe:
-	ba,pt	%xcc, sparc_pipe
+	ba,pt	%xcc, sys_sparc_pipe_real
 	 add	%sp, PTREGS_OFF, %o0
 sys_nis_syscall:
 	ba,pt	%xcc, c_sys_nis_syscall
diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h
index bc9f5da..15c2d752 100644
--- a/arch/sparc/kernel/systbls.h
+++ b/arch/sparc/kernel/systbls.h
@@ -16,9 +16,6 @@
 			       void __user *ptr, long fifth);
 extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
 extern asmlinkage long sparc64_personality(unsigned long personality);
-extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
-					 unsigned long prot, unsigned long flags,
-					 unsigned long fd, unsigned long off);
 extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
 extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
 					     unsigned long old_len,
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index e6007bb3..f93c42a 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -21,7 +21,7 @@
 /*0*/	.word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod
-/*15*/	.word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
+/*15*/	.word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
@@ -55,8 +55,8 @@
 /*170*/	.word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents
 	.word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall
-	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname
-/*190*/	.word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
+	.word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname
+/*190*/	.word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl
 	.word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask
 /*200*/	.word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir
 	.word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64
@@ -95,7 +95,7 @@
 /*0*/	.word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write
 /*5*/	.word sys_open, sys_close, sys_wait4, sys_creat, sys_link
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
-/*15*/	.word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
+/*15*/	.word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
@@ -106,7 +106,7 @@
 	.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
 /*60*/	.word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize
 	.word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall
-/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect
+/*70*/	.word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect
 	.word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups
 /*80*/	.word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall
 	.word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall
@@ -129,8 +129,8 @@
 /*170*/	.word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents
 	.word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr
 /*180*/	.word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall
-	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname
-/*190*/	.word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
+	.word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname
+/*190*/	.word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 	.word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask
 /*200*/	.word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall
 	.word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
@@ -142,7 +142,7 @@
 	.word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
 /*240*/	.word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
 	.word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep
-/*250*/	.word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
+/*250*/	.word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl
 	.word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep
 /*260*/	.word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun
 	.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index c2d153d..d809c4e 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -314,6 +314,21 @@
 		return;
 
 	if (regs->tstate & TSTATE_PRIV) {
+		/* Test if this comes from uaccess places. */
+		const struct exception_table_entry *entry;
+
+		entry = search_exception_tables(regs->tpc);
+		if (entry) {
+			/* Ouch, somebody is trying VM hole tricks on us... */
+#ifdef DEBUG_EXCEPTIONS
+			printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
+			printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
+			       regs->tpc, entry->fixup);
+#endif
+			regs->tpc = entry->fixup;
+			regs->tnpc = regs->tpc + 4;
+			return;
+		}
 		printk("sun4v_data_access_exception: ADDR[%016lx] "
 		       "CTX[%04x] TYPE[%04x], going.\n",
 		       addr, ctx, type);
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 273fc85..e75faf0 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -18,7 +18,7 @@
 lib-y                 += rwsem_$(BITS).o
 lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o
 
-lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o
+lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o
 lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
 lib-$(CONFIG_SPARC64) += VISsave.o
 lib-$(CONFIG_SPARC64) += bitops.o
@@ -43,3 +43,4 @@
 obj-y                 += iomap.o
 obj-$(CONFIG_SPARC32) += atomic32.o
 obj-y                 += ksyms.o
+obj-$(CONFIG_SPARC64) += PeeCeeI.o
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index b30a08e..edba00d 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1331,8 +1331,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 0e7dbc0..322dd27 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1311,8 +1311,8 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index e02a359..02b47a6 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -3,6 +3,9 @@
 
 /*
  * Copyright 1992, Linus Torvalds.
+ *
+ * Note: inlines with more than a single statement should be marked
+ * __always_inline to avoid problems with older gcc's inlining heuristics.
  */
 
 #ifndef _LINUX_BITOPS_H
@@ -53,7 +56,8 @@
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void set_bit(unsigned int nr, volatile unsigned long *addr)
+static __always_inline void
+set_bit(unsigned int nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "orb %1,%0"
@@ -90,7 +94,8 @@
  * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
  * in order to ensure changes are visible on other processors.
  */
-static inline void clear_bit(int nr, volatile unsigned long *addr)
+static __always_inline void
+clear_bit(int nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "andb %1,%0"
@@ -204,7 +209,8 @@
  *
  * This is the same as test_and_set_bit on x86.
  */
-static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr)
+static __always_inline int
+test_and_set_bit_lock(int nr, volatile unsigned long *addr)
 {
 	return test_and_set_bit(nr, addr);
 }
@@ -300,7 +306,7 @@
 	return oldbit;
 }
 
-static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
+static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
 {
 	return ((1UL << (nr % BITS_PER_LONG)) &
 		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 05cfed4..1dbbdf4 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -99,7 +99,6 @@
  * A boot-time mapping is currently limited to at most 16 pages.
  */
 extern void early_ioremap_init(void);
-extern void early_ioremap_clear(void);
 extern void early_ioremap_reset(void);
 extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
 extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index cb58643..358acc5 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -202,6 +202,35 @@
 #define MSR_IA32_THERM_STATUS		0x0000019c
 #define MSR_IA32_MISC_ENABLE		0x000001a0
 
+/* MISC_ENABLE bits: architectural */
+#define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
+#define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
+#define MSR_IA32_MISC_ENABLE_EMON		(1ULL << 7)
+#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL	(1ULL << 11)
+#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL	(1ULL << 12)
+#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP	(1ULL << 16)
+#define MSR_IA32_MISC_ENABLE_MWAIT		(1ULL << 18)
+#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID	(1ULL << 22)
+#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE	(1ULL << 23)
+#define MSR_IA32_MISC_ENABLE_XD_DISABLE		(1ULL << 34)
+
+/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */
+#define MSR_IA32_MISC_ENABLE_X87_COMPAT		(1ULL << 2)
+#define MSR_IA32_MISC_ENABLE_TM1		(1ULL << 3)
+#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE	(1ULL << 4)
+#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE	(1ULL << 6)
+#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK	(1ULL << 8)
+#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE	(1ULL << 9)
+#define MSR_IA32_MISC_ENABLE_FERR		(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX	(1ULL << 10)
+#define MSR_IA32_MISC_ENABLE_TM2		(1ULL << 13)
+#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE	(1ULL << 19)
+#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK	(1ULL << 20)
+#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT	(1ULL << 24)
+#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE	(1ULL << 37)
+#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE	(1ULL << 38)
+#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE	(1ULL << 39)
+
 /* Intel Model 6 */
 #define MSR_P6_EVNTSEL0			0x00000186
 #define MSR_P6_EVNTSEL1			0x00000187
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index cb7c151..dd14c54 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -42,6 +42,7 @@
 
 static inline void pte_free(struct mm_struct *mm, struct page *pte)
 {
+	pgtable_page_dtor(pte);
 	__free_page(pte);
 }
 
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 9c6797c..c0b0bda 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -40,7 +40,7 @@
 			     struct old_sigaction __user *);
 asmlinkage int sys_sigaltstack(unsigned long);
 asmlinkage unsigned long sys_sigreturn(unsigned long);
-asmlinkage int sys_rt_sigreturn(struct pt_regs);
+asmlinkage int sys_rt_sigreturn(unsigned long);
 
 /* kernel/ioport.c */
 asmlinkage long sys_iopl(unsigned long);
diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h
index 1287dc1..b5c9d45 100644
--- a/arch/x86/include/asm/timex.h
+++ b/arch/x86/include/asm/timex.h
@@ -1,18 +1,13 @@
-/* x86 architecture timex specifications */
 #ifndef _ASM_X86_TIMEX_H
 #define _ASM_X86_TIMEX_H
 
 #include <asm/processor.h>
 #include <asm/tsc.h>
 
-#ifdef CONFIG_X86_ELAN
-#  define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */
-#elif defined(CONFIG_X86_RDC321X)
-#  define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */
-#else
-#  define PIT_TICK_RATE 1193182 /* Underlying HZ */
-#endif
-#define CLOCK_TICK_RATE	PIT_TICK_RATE
+/* The PIT ticks at this frequency (in HZ): */
+#define PIT_TICK_RATE		1193182
+
+#define CLOCK_TICK_RATE		PIT_TICK_RATE
 
 #define ARCH_HAS_READ_CURRENT_TIMER
 
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 0f830e4..4b6df24 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -895,6 +895,10 @@
 {
 	unsigned int value;
 
+	/* APIC hasn't been mapped yet */
+	if (!apic_phys)
+		return;
+
 	clear_local_APIC();
 
 	/*
@@ -1833,6 +1837,11 @@
 	num_processors++;
 	cpu = cpumask_next_zero(-1, cpu_present_mask);
 
+	if (version != apic_version[boot_cpu_physical_apicid])
+		WARN_ONCE(1,
+			"ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n",
+			apic_version[boot_cpu_physical_apicid], cpu, version);
+
 	physid_set(apicid, phys_cpu_present_map);
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 6f11e02..4b1c319 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -145,13 +145,14 @@
 
 struct drv_cmd {
 	unsigned int type;
-	cpumask_var_t mask;
+	const struct cpumask *mask;
 	drv_addr_union addr;
 	u32 val;
 };
 
-static void do_drv_read(struct drv_cmd *cmd)
+static long do_drv_read(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 h;
 
 	switch (cmd->type) {
@@ -166,10 +167,12 @@
 	default:
 		break;
 	}
+	return 0;
 }
 
-static void do_drv_write(struct drv_cmd *cmd)
+static long do_drv_write(void *_cmd)
 {
+	struct drv_cmd *cmd = _cmd;
 	u32 lo, hi;
 
 	switch (cmd->type) {
@@ -186,30 +189,23 @@
 	default:
 		break;
 	}
+	return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	cmd->val = 0;
 
-	set_cpus_allowed_ptr(current, cmd->mask);
-	do_drv_read(cmd);
-	set_cpus_allowed_ptr(current, &saved_mask);
+	work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
-	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
 	for_each_cpu(i, cmd->mask) {
-		set_cpus_allowed_ptr(current, cpumask_of(i));
-		do_drv_write(cmd);
+		work_on_cpu(i, do_drv_write, cmd);
 	}
-
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return;
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -235,8 +231,7 @@
 		return 0;
 	}
 
-	cpumask_copy(cmd.mask, mask);
-
+	cmd.mask = mask;
 	drv_read(&cmd);
 
 	dprintk("get_cur_val = %u\n", cmd.val);
@@ -368,7 +363,7 @@
 	return freq;
 }
 
-static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
+static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 				struct acpi_cpufreq_data *data)
 {
 	unsigned int cur_freq;
@@ -403,9 +398,6 @@
 		return -ENODEV;
 	}
 
-	if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
-		return -ENOMEM;
-
 	perf = data->acpi_data;
 	result = cpufreq_frequency_table_target(policy,
 						data->freq_table,
@@ -450,9 +442,9 @@
 
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
 	if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY)
-		cpumask_and(cmd.mask, cpu_online_mask, policy->cpus);
+		cmd.mask = policy->cpus;
 	else
-		cpumask_copy(cmd.mask, cpumask_of(policy->cpu));
+		cmd.mask = cpumask_of(policy->cpu);
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
@@ -479,7 +471,6 @@
 	perf->state = next_perf_state;
 
 out:
-	free_cpumask_var(cmd.mask);
 	return result;
 }
 
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8ea6929..549f2ad 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,6 +29,19 @@
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
+	/* Unmask CPUID levels if masked: */
+	if (c->x86 == 6 && c->x86_model >= 15) {
+		u64 misc_enable;
+
+		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+
+		if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) {
+			misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
+			wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+			c->cpuid_level = cpuid_eax(0);
+		}
+	}
+
 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index b59ddcc..0c0a455 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -33,11 +33,13 @@
 struct mtrr_state_type mtrr_state = {};
 EXPORT_SYMBOL_GPL(mtrr_state);
 
-#undef MODULE_PARAM_PREFIX
-#define MODULE_PARAM_PREFIX "mtrr."
-
-static int mtrr_show;
-module_param_named(show, mtrr_show, bool, 0);
+static int __initdata mtrr_show;
+static int __init mtrr_debug(char *opt)
+{
+	mtrr_show = 1;
+	return 0;
+}
+early_param("mtrr.show", mtrr_debug);
 
 /*
  * Returns the effective MTRR type for the region
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index cd759ad..64d5ad0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -628,11 +628,12 @@
 
 	switch (action & 0xf) {
 	case CPU_ONLINE:
-		INIT_DELAYED_WORK(&work.work, hpet_work);
+		INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work);
 		init_completion(&work.complete);
 		/* FIXME: add schedule_work_on() */
 		schedule_delayed_work_on(cpu, &work.work, 0);
 		wait_for_completion(&work.complete);
+		destroy_timer_on_stack(&work.work.timer);
 		break;
 	case CPU_DEAD:
 		if (hdev) {
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 55c4607..0116107 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -136,7 +136,7 @@
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
-static void setup_cpu_local_masks(void)
+static void __init setup_cpu_local_masks(void)
 {
 	alloc_bootmem_cpumask_var(&cpu_initialized_mask);
 	alloc_bootmem_cpumask_var(&cpu_callin_mask);
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 89bb766..df0587f 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -632,9 +632,16 @@
 }
 
 #ifdef CONFIG_X86_32
-asmlinkage int sys_rt_sigreturn(struct pt_regs regs)
+/*
+ * Note: do not pass in pt_regs directly as with tail-call optimization
+ * GCC will incorrectly stomp on the caller's frame and corrupt user-space
+ * register state:
+ */
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 {
-	return do_rt_sigreturn(&regs);
+	struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+	return do_rt_sigreturn(regs);
 }
 #else /* !CONFIG_X86_32 */
 asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index f885023..6812b82 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -200,6 +200,7 @@
 				destination_timeouts = 0;
 			}
 		}
+		cpu_relax();
 	}
 	return FLUSH_COMPLETE;
 }
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index 23206ba..1d3302c 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -858,7 +858,7 @@
 #endif
 }
 
-void vmi_activate(void)
+void __init vmi_activate(void)
 {
 	unsigned long flags;
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 4a20b2f..7c8ca91 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -56,7 +56,7 @@
 		"	jmp 2b\n"					   \
 		".previous\n"						   \
 		_ASM_EXTABLE(0b,3b)					   \
-		: "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),	   \
+		: "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
 		  "=&D" (__d2)						   \
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
 		: "memory");						   \
@@ -218,7 +218,7 @@
 		"	.align 4\n"
 		"	.long 0b,2b\n"
 		".previous"
-		:"=r" (n), "=D" (s), "=a" (res), "=c" (tmp)
+		:"=&r" (n), "=&D" (s), "=&a" (res), "=&c" (tmp)
 		:"0" (n), "1" (s), "2" (0), "3" (mask)
 		:"cc");
 	return res & mask;
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 64d6c84..ec13cb5 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -32,7 +32,7 @@
 		"	jmp 2b\n"					   \
 		".previous\n"						   \
 		_ASM_EXTABLE(0b,3b)					   \
-		: "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1),	   \
+		: "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1),	   \
 		  "=&D" (__d2)						   \
 		: "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \
 		: "memory");						   \
@@ -86,7 +86,7 @@
 		".previous\n"
 		_ASM_EXTABLE(0b,3b)
 		_ASM_EXTABLE(1b,2b)
-		: [size8] "=c"(size), [dst] "=&D" (__d0)
+		: [size8] "=&c"(size), [dst] "=&D" (__d0)
 		: [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr),
 		  [zero] "r" (0UL), [eight] "r" (8UL));
 	return size;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 88f1b10..2cef050 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -138,6 +138,47 @@
 	return pte_offset_kernel(pmd, 0);
 }
 
+static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
+					   unsigned long vaddr, pte_t *lastpte)
+{
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * Something (early fixmap) may already have put a pte
+	 * page here, which causes the page table allocation
+	 * to become nonlinear. Attempt to fix it, and if it
+	 * is still nonlinear then we have to bug.
+	 */
+	int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
+	int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
+
+	if (pmd_idx_kmap_begin != pmd_idx_kmap_end
+	    && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
+	    && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end
+	    && ((__pa(pte) >> PAGE_SHIFT) < table_start
+		|| (__pa(pte) >> PAGE_SHIFT) >= table_end)) {
+		pte_t *newpte;
+		int i;
+
+		BUG_ON(after_init_bootmem);
+		newpte = alloc_low_page();
+		for (i = 0; i < PTRS_PER_PTE; i++)
+			set_pte(newpte + i, pte[i]);
+
+		paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT);
+		set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE));
+		BUG_ON(newpte != pte_offset_kernel(pmd, 0));
+		__flush_tlb_all();
+
+		paravirt_release_pte(__pa(pte) >> PAGE_SHIFT);
+		pte = newpte;
+	}
+	BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1)
+	       && vaddr > fix_to_virt(FIX_KMAP_END)
+	       && lastpte && lastpte + PTRS_PER_PTE != pte);
+#endif
+	return pte;
+}
+
 /*
  * This function initializes a certain range of kernel virtual memory
  * with new bootmem page tables, everywhere page tables are missing in
@@ -154,6 +195,7 @@
 	unsigned long vaddr;
 	pgd_t *pgd;
 	pmd_t *pmd;
+	pte_t *pte = NULL;
 
 	vaddr = start;
 	pgd_idx = pgd_index(vaddr);
@@ -165,7 +207,8 @@
 		pmd = pmd + pmd_index(vaddr);
 		for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
 							pmd++, pmd_idx++) {
-			one_page_table_init(pmd);
+			pte = page_table_kmap_check(one_page_table_init(pmd),
+			                            pmd, vaddr, pte);
 
 			vaddr += PMD_SIZE;
 		}
@@ -508,7 +551,6 @@
 	 * Fixed mappings, only the page table structure has to be
 	 * created - mappings will be set by set_fixmap():
 	 */
-	early_ioremap_clear();
 	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
 	end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
 	page_table_range_init(vaddr, end, pgd_base);
@@ -801,7 +843,7 @@
 	tables += PAGE_ALIGN(ptes * sizeof(pte_t));
 
 	/* for fixmap */
-	tables += PAGE_SIZE * 2;
+	tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t));
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 23f68e7..e6d36b4 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -596,7 +596,7 @@
 		direct_gbpages = 0;
 }
 
-static unsigned long __init kernel_physical_mapping_init(unsigned long start,
+static unsigned long __meminit kernel_physical_mapping_init(unsigned long start,
 						unsigned long end,
 						unsigned long page_size_mask)
 {
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index d0151d8..ca53224 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -17,6 +17,7 @@
  */
 
 #include <asm/iomap.h>
+#include <asm/pat.h>
 #include <linux/module.h>
 
 /* Map 'pfn' using fixed map 'type' and protections 'prot'
@@ -29,6 +30,15 @@
 
 	pagefault_disable();
 
+	/*
+	 * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS.
+	 * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the
+	 * MTRR is UC or WC.  UC_MINUS gets the real intention, of the
+	 * user, which is "WC if the MTRR is WC, UC if you can't do that."
+	 */
+	if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
+		prot = PAGE_KERNEL_UC_MINUS;
+
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	set_pte(kmap_pte-idx, pfn_pte(pfn, prot));
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index bd85d42..af750ab 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -557,34 +557,9 @@
 	}
 }
 
-void __init early_ioremap_clear(void)
-{
-	pmd_t *pmd;
-
-	if (early_ioremap_debug)
-		printk(KERN_INFO "early_ioremap_clear()\n");
-
-	pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
-	pmd_clear(pmd);
-	paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT);
-	__flush_tlb_all();
-}
-
 void __init early_ioremap_reset(void)
 {
-	enum fixed_addresses idx;
-	unsigned long addr, phys;
-	pte_t *pte;
-
 	after_paging_init = 1;
-	for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) {
-		addr = fix_to_virt(idx);
-		pte = early_ioremap_pte(addr);
-		if (pte_present(*pte)) {
-			phys = pte_val(*pte) & PAGE_MASK;
-			set_fixmap(idx, phys);
-		}
-	}
 }
 
 static void __init __early_set_fixmap(enum fixed_addresses idx,
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e89d248..84ba748 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -534,6 +534,36 @@
 	return 0;
 }
 
+static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr,
+			       int primary)
+{
+	/*
+	 * Ignore all non primary paths.
+	 */
+	if (!primary)
+		return 0;
+
+	/*
+	 * Ignore the NULL PTE for kernel identity mapping, as it is expected
+	 * to have holes.
+	 * Also set numpages to '1' indicating that we processed cpa req for
+	 * one virtual address page and its pfn. TBD: numpages can be set based
+	 * on the initial value and the level returned by lookup_address().
+	 */
+	if (within(vaddr, PAGE_OFFSET,
+		   PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) {
+		cpa->numpages = 1;
+		cpa->pfn = __pa(vaddr) >> PAGE_SHIFT;
+		return 0;
+	} else {
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
+			"vaddr = %lx cpa->vaddr = %lx\n", vaddr,
+			*cpa->vaddr);
+
+		return -EFAULT;
+	}
+}
+
 static int __change_page_attr(struct cpa_data *cpa, int primary)
 {
 	unsigned long address;
@@ -549,17 +579,11 @@
 repeat:
 	kpte = lookup_address(address, &level);
 	if (!kpte)
-		return 0;
+		return __cpa_process_fault(cpa, address, primary);
 
 	old_pte = *kpte;
-	if (!pte_val(old_pte)) {
-		if (!primary)
-			return 0;
-		WARN(1, KERN_WARNING "CPA: called for zero pte. "
-		       "vaddr = %lx cpa->vaddr = %lx\n", address,
-		       *cpa->vaddr);
-		return -EINVAL;
-	}
+	if (!pte_val(old_pte))
+		return __cpa_process_fault(cpa, address, primary);
 
 	if (level == PG_LEVEL_4K) {
 		pte_t new_pte;
@@ -657,12 +681,7 @@
 		vaddr = *cpa->vaddr;
 
 	if (!(within(vaddr, PAGE_OFFSET,
-		    PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT))
-#ifdef CONFIG_X86_64
-		|| within(vaddr, PAGE_OFFSET + (1UL<<32),
-		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))
-#endif
-	)) {
+		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
 		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 8b08fb9..7b61036 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -333,11 +333,23 @@
 					      req_type & _PAGE_CACHE_MASK);
 	}
 
-	is_range_ram = pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return reserve_ram_pages_type(start, end, req_type, new_type);
-	else if (is_range_ram < 0)
-		return -EINVAL;
+	if (new_type)
+		*new_type = actual_type;
+
+	/*
+	 * For legacy reasons, some parts of the physical address range in the
+	 * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+	 * the e820 tables).  So we will track the memory attributes of this
+	 * legacy 1MB region using the linear memtype_list always.
+	 */
+	if (end >= ISA_END_ADDRESS) {
+		is_range_ram = pagerange_is_ram(start, end);
+		if (is_range_ram == 1)
+			return reserve_ram_pages_type(start, end, req_type,
+						      new_type);
+		else if (is_range_ram < 0)
+			return -EINVAL;
+	}
 
 	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
@@ -347,9 +359,6 @@
 	new->end	= end;
 	new->type	= actual_type;
 
-	if (new_type)
-		*new_type = actual_type;
-
 	spin_lock(&memtype_lock);
 
 	if (cached_entry && start >= cached_start)
@@ -437,11 +446,19 @@
 	if (is_ISA_range(start, end - 1))
 		return 0;
 
-	is_range_ram = pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return free_ram_pages_type(start, end);
-	else if (is_range_ram < 0)
-		return -EINVAL;
+	/*
+	 * For legacy reasons, some parts of the physical address range in the
+	 * legacy 1MB region is treated as non-RAM (even when listed as RAM in
+	 * the e820 tables).  So we will track the memory attributes of this
+	 * legacy 1MB region using the linear memtype_list always.
+	 */
+	if (end >= ISA_END_ADDRESS) {
+		is_range_ram = pagerange_is_ram(start, end);
+		if (is_range_ram == 1)
+			return free_ram_pages_type(start, end);
+		else if (is_range_ram < 0)
+			return -EINVAL;
+	}
 
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
diff --git a/arch/x86/scripts/strip-symbols b/arch/x86/scripts/strip-symbols
deleted file mode 100644
index a2f1ccb..0000000
--- a/arch/x86/scripts/strip-symbols
+++ /dev/null
@@ -1 +0,0 @@
-__cpu_vendor_dev_X86_VENDOR_*
diff --git a/crypto/authenc.c b/crypto/authenc.c
index 40b6e9e..5793b64 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -158,16 +158,19 @@
 	dstp = sg_page(dst);
 	vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset;
 
-	sg_init_table(cipher, 2);
-	sg_set_buf(cipher, iv, ivsize);
-	authenc_chain(cipher, dst, vdst == iv + ivsize);
+	if (ivsize) {
+		sg_init_table(cipher, 2);
+		sg_set_buf(cipher, iv, ivsize);
+		authenc_chain(cipher, dst, vdst == iv + ivsize);
+		dst = cipher;
+	}
 
 	cryptlen = req->cryptlen + ivsize;
-	hash = crypto_authenc_hash(req, flags, cipher, cryptlen);
+	hash = crypto_authenc_hash(req, flags, dst, cryptlen);
 	if (IS_ERR(hash))
 		return PTR_ERR(hash);
 
-	scatterwalk_map_and_copy(hash, cipher, cryptlen,
+	scatterwalk_map_and_copy(hash, dst, cryptlen,
 				 crypto_aead_authsize(authenc), 1);
 	return 0;
 }
@@ -285,11 +288,14 @@
 	srcp = sg_page(src);
 	vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset;
 
-	sg_init_table(cipher, 2);
-	sg_set_buf(cipher, iv, ivsize);
-	authenc_chain(cipher, src, vsrc == iv + ivsize);
+	if (ivsize) {
+		sg_init_table(cipher, 2);
+		sg_set_buf(cipher, iv, ivsize);
+		authenc_chain(cipher, src, vsrc == iv + ivsize);
+		src = cipher;
+	}
 
-	return crypto_authenc_verify(req, cipher, cryptlen + ivsize);
+	return crypto_authenc_verify(req, src, cryptlen + ivsize);
 }
 
 static int crypto_authenc_decrypt(struct aead_request *req)
diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c
index 4a7e65c..d70a41c 100644
--- a/crypto/blkcipher.c
+++ b/crypto/blkcipher.c
@@ -124,6 +124,7 @@
 	scatterwalk_done(&walk->in, 0, nbytes);
 	scatterwalk_done(&walk->out, 1, nbytes);
 
+err:
 	walk->total = nbytes;
 	walk->nbytes = nbytes;
 
@@ -132,7 +133,6 @@
 		return blkcipher_walk_next(desc, walk);
 	}
 
-err:
 	if (walk->iv != desc->info)
 		memcpy(desc->info, walk->iv, crypto_blkcipher_ivsize(tfm));
 	if (walk->buffer != walk->page)
diff --git a/crypto/ccm.c b/crypto/ccm.c
index 7cf7e5a..c36d654 100644
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -266,6 +266,8 @@
 	if (assoclen) {
 		pctx->ilen = format_adata(idata, assoclen);
 		get_data_to_compute(cipher, pctx, req->assoc, req->assoclen);
+	} else {
+		pctx->ilen = 0;
 	}
 
 	/* compute plaintext into mac */
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 503a908..0bcf264 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -112,11 +112,11 @@
 	  If unsure, say N.
 
 config SATA_MV
-	tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Marvell SATA support"
 	help
 	  This option enables support for the Marvell Serial ATA family.
-	  Currently supports 88SX[56]0[48][01] chips.
+	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,
+	  as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 
 	  If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9603967..77bba4c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2548,6 +2548,32 @@
 	}
 }
 
+static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6310",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -2647,6 +2673,12 @@
 		}
 	}
 
+	if (ahci_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
+		dev_info(&pdev->dev,
+			"quirky BIOS, skipping spindown on poweroff\n");
+	}
+
 	/* CAP.NP sometimes indicate the index of the last enabled
 	 * port, at other times, that of the last possible port, so
 	 * determining the maximum port number requires looking at
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 887d8f4..54961c0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1387,6 +1387,32 @@
 	}
 }
 
+static bool piix_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq 2510p",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 /**
  *	piix_init_one - Register PIIX ATA PCI device with kernel services
  *	@pdev: PCI device to register
@@ -1422,6 +1448,14 @@
 	if (!in_module_init)
 		return -ENODEV;
 
+	if (piix_broken_system_poweroff(pdev)) {
+		piix_port_info[ent->driver_data].flags |=
+				ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	port_info[0] = piix_port_info[ent->driver_data];
 	port_info[1] = piix_port_info[ent->driver_data];
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a1a6e629..3c4c5ae 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -46,6 +46,7 @@
 #include <linux/libata.h>
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
+#include <linux/suspend.h>
 
 #include "libata.h"
 
@@ -1303,6 +1304,17 @@
 
 		tf->command = ATA_CMD_VERIFY;	/* READ VERIFY */
 	} else {
+		/* Some odd clown BIOSen issue spindown on power off (ACPI S4
+		 * or S5) causing some drives to spin up and down again.
+		 */
+		if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+		    system_state == SYSTEM_POWER_OFF)
+			goto skip;
+
+		if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+		     system_entering_hibernation())
+			goto skip;
+
 		/* XXX: This is for backward compatibility, will be
 		 * removed.  Read Documentation/feature-removal-schedule.txt
 		 * for more info.
@@ -1326,8 +1338,7 @@
 				scmd->scsi_done = qc->scsidone;
 				qc->scsidone = ata_delayed_done;
 			}
-			scmd->result = SAM_STAT_GOOD;
-			return 1;
+			goto skip;
 		}
 
 		/* Issue ATA STANDBY IMMEDIATE command */
@@ -1343,10 +1354,13 @@
 
 	return 0;
 
-invalid_fld:
+ invalid_fld:
 	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0);
 	/* "Invalid field in cbd" */
 	return 1;
+ skip:
+	scmd->result = SAM_STAT_GOOD;
+	return 1;
 }
 
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5a4aad1..0b299b0 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1322,7 +1322,7 @@
 					 * condition.  Mark hint.
 					 */
 					ata_ehi_push_desc(ehi, "ST-ATA: "
-						"DRQ=1 with device error, "
+						"DRQ=0 without device error, "
 						"dev_stat 0x%X", status);
 					qc->err_mask |= AC_ERR_HSM |
 							AC_ERR_NODEV_HINT;
@@ -1358,6 +1358,16 @@
 					qc->err_mask |= AC_ERR_HSM;
 				}
 
+				/* There are oddball controllers with
+				 * status register stuck at 0x7f and
+				 * lbal/m/h at zero which makes it
+				 * pass all other presence detection
+				 * mechanisms we have.  Set NODEV_HINT
+				 * for it.  Kernel bz#7241.
+				 */
+				if (status == 0x7f)
+					qc->err_mask |= AC_ERR_NODEV_HINT;
+
 				/* ata_pio_sectors() might change the
 				 * state to HSM_ST_LAST. so, the state
 				 * is changed after ata_pio_sectors().
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index c2e6fb9..ebfcda2 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -63,8 +63,6 @@
 	   ata_sff_sync might be sufficient. */
 	ata_sff_dma_pause(ap);
 	ndelay(RB500_CF_IO_DELAY);
-
-	set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 }
 
 static void rb532_pata_exec_command(struct ata_port *ap,
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 681169c..79a6c9a 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -86,6 +86,10 @@
 	VIA_SATA_PATA	= 0x800, /* SATA/PATA combined configuration */
 };
 
+enum {
+	VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */
+};
+
 /*
  * VIA SouthBridge chips.
  */
@@ -97,8 +101,12 @@
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vx855",	PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
 	VIA_BAD_AST | VIA_SATA_PATA },
+	{ "vt8261",	PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -122,6 +130,8 @@
 	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
 	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ "vtxxxx",	PCI_DEVICE_ID_VIA_ANON,    0x00, 0x2f,
+	  VIA_UDMA_133 | VIA_BAD_AST },
 	{ NULL }
 };
 
@@ -460,6 +470,7 @@
 	static int printed_version;
 	u8 enable;
 	u32 timing;
+	unsigned long flags = id->driver_data;
 	int rc;
 
 	if (!printed_version++)
@@ -469,9 +480,13 @@
 	if (rc)
 		return rc;
 
+	if (flags & VIA_IDFLAG_SINGLE)
+		ppi[1] = &ata_dummy_port_info;
+
 	/* To find out how the IDE will behave and what features we
 	   actually have to look at the bridge not the IDE controller */
-	for (config = via_isa_bridges; config->id; config++)
+	for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON;
+	     config++)
 		if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(config->flags & VIA_BAD_ID),
 			config->id, NULL))) {
@@ -482,10 +497,6 @@
 			pci_dev_put(isa);
 		}
 
-	if (!config->id) {
-		printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n");
-		return -ENODEV;
-	}
 	pci_dev_put(isa);
 
 	if (!(config->flags & VIA_NO_ENABLES)) {
@@ -587,6 +598,7 @@
 	{ PCI_VDEVICE(VIA, 0x1571), },
 	{ PCI_VDEVICE(VIA, 0x3164), },
 	{ PCI_VDEVICE(VIA, 0x5324), },
+	{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
 
 	{ },
 };
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 86918634..f2d8a020 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -33,10 +33,6 @@
  *
  * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
  *
- * --> Investigate problems with PCI Message Signalled Interrupts (MSI).
- *
- * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead.
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
  * --> [Experiment, low priority] Investigate interrupt coalescing.
@@ -72,7 +68,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.24"
+#define DRV_VERSION	"1.25"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -351,8 +347,6 @@
 
 	EDMA_HALTCOND_OFS	= 0x60,		/* GenIIe halt conditions */
 
-	GEN_II_NCQ_MAX_SECTORS	= 256,		/* max sects/io on Gen2 w/NCQ */
-
 	/* Host private flags (hp_flags) */
 	MV_HP_FLAG_MSI		= (1 << 0),
 	MV_HP_ERRATA_50XXB0	= (1 << 1),
@@ -883,19 +877,15 @@
 		struct mv_host_priv *hpriv = ap->host->private_data;
 		int hardport = mv_hardport_from_port(ap->port_no);
 		void __iomem *hc_mmio = mv_hc_base_from_port(
-					mv_host_base(ap->host), hardport);
-		u32 hc_irq_cause, ipending;
+					mv_host_base(ap->host), ap->port_no);
+		u32 hc_irq_cause;
 
 		/* clear EDMA event indicators, if any */
 		writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-		/* clear EDMA interrupt indicator, if any */
-		hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-		ipending = (DEV_IRQ | DMA_IRQ) << hardport;
-		if (hc_irq_cause & ipending) {
-			writelfl(hc_irq_cause & ~ipending,
-				 hc_mmio + HC_IRQ_CAUSE_OFS);
-		}
+		/* clear pending irq events */
+		hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+		writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 		mv_edma_cfg(ap, want_ncq);
 
@@ -1099,20 +1089,12 @@
 	 *
 	 * Gen-II does not support NCQ over a port multiplier
 	 *  (no FIS-based switching).
-	 *
-	 * We don't have hob_nsect when doing NCQ commands on Gen-II.
-	 * See mv_qc_prep() for more info.
 	 */
 	if (adev->flags & ATA_DFLAG_NCQ) {
 		if (sata_pmp_attached(adev->link->ap)) {
 			adev->flags &= ~ATA_DFLAG_NCQ;
 			ata_dev_printk(adev, KERN_INFO,
 				"NCQ disabled for command-based switching\n");
-		} else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) {
-			adev->max_sectors = GEN_II_NCQ_MAX_SECTORS;
-			ata_dev_printk(adev, KERN_INFO,
-				"max_sectors limited to %u for NCQ\n",
-				adev->max_sectors);
 		}
 	}
 }
@@ -1450,7 +1432,8 @@
 	 * only 11 bytes...so we must pick and choose required
 	 * registers based on the command.  So, we drop feature and
 	 * hob_feature for [RW] DMA commands, but they are needed for
-	 * NCQ.  NCQ will drop hob_nsect.
+	 * NCQ.  NCQ will drop hob_nsect, which is not needed there
+	 * (nsect is used only for the tag; feat/hob_feat hold true nsect).
 	 */
 	switch (tf->command) {
 	case ATA_CMD_READ:
@@ -2214,9 +2197,15 @@
 	struct ata_host *host = dev_instance;
 	struct mv_host_priv *hpriv = host->private_data;
 	unsigned int handled = 0;
+	int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI;
 	u32 main_irq_cause, pending_irqs;
 
 	spin_lock(&host->lock);
+
+	/* for MSI:  block new interrupts while in here */
+	if (using_msi)
+		writel(0, hpriv->main_irq_mask_addr);
+
 	main_irq_cause = readl(hpriv->main_irq_cause_addr);
 	pending_irqs   = main_irq_cause & hpriv->main_irq_mask;
 	/*
@@ -2230,6 +2219,11 @@
 			handled = mv_host_intr(host, pending_irqs);
 	}
 	spin_unlock(&host->lock);
+
+	/* for MSI: unmask; interrupt cause bits will retrigger now */
+	if (using_msi)
+		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+
 	return IRQ_RETVAL(handled);
 }
 
@@ -2821,8 +2815,7 @@
 	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* clear pending irq events */
-	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
+	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
 	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 	mv_enable_port_irqs(ap, ERR_IRQ);
@@ -3075,6 +3068,9 @@
 		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
 	}
 
+	/* initialize shadow irq mask with register's value */
+	hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr);
+
 	/* global interrupt mask: 0 == mask everything */
 	mv_set_main_irq_mask(host, ~0, 0);
 
@@ -3430,9 +3426,9 @@
 	if (rc)
 		return rc;
 
-	/* Enable interrupts */
-	if (msi && pci_enable_msi(pdev))
-		pci_intx(pdev, 1);
+	/* Enable message-switched interrupts, if requested */
+	if (msi && pci_enable_msi(pdev) == 0)
+		hpriv->hp_flags |= MV_HP_FLAG_MSI;
 
 	mv_dump_pci_cfg(pdev, 0x68);
 	mv_print_info(host);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6f146061..c49ad0e 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -305,10 +305,10 @@
 static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline);
 static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
 static int nv_adma_slave_config(struct scsi_device *sdev);
@@ -352,6 +352,7 @@
 	NFORCE3 = NFORCE2,	/* NF2 == NF3 as far as sata_nv is concerned */
 	CK804,
 	ADMA,
+	MCP5x,
 	SWNCQ,
 };
 
@@ -363,10 +364,10 @@
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ },
-	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x },
+	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC },
 	{ PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC },
@@ -432,7 +433,7 @@
 	.inherits		= &nv_common_ops,
 	.freeze			= nv_nf2_freeze,
 	.thaw			= nv_nf2_thaw,
-	.hardreset		= nv_nf2_hardreset,
+	.hardreset		= nv_noclassify_hardreset,
 };
 
 /* CK804 finally gets hardreset right */
@@ -467,8 +468,19 @@
 	.host_stop		= nv_adma_host_stop,
 };
 
+/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to
+ * work, hardreset should be used and hardreset can't report proper
+ * signature, which suggests that mcp5x is closer to nf2 as long as
+ * reset quirkiness is concerned.  Define separate ops for mcp5x with
+ * nv_noclassify_hardreset().
+ */
+static struct ata_port_operations nv_mcp5x_ops = {
+	.inherits		= &nv_common_ops,
+	.hardreset		= nv_noclassify_hardreset,
+};
+
 static struct ata_port_operations nv_swncq_ops = {
-	.inherits		= &nv_generic_ops,
+	.inherits		= &nv_mcp5x_ops,
 
 	.qc_defer		= ata_std_qc_defer,
 	.qc_prep		= nv_swncq_qc_prep,
@@ -531,6 +543,15 @@
 		.port_ops	= &nv_adma_ops,
 		.private_data	= NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
 	},
+	/* MCP5x */
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.pio_mask	= NV_PIO_MASK,
+		.mwdma_mask	= NV_MWDMA_MASK,
+		.udma_mask	= NV_UDMA_MASK,
+		.port_ops	= &nv_mcp5x_ops,
+		.private_data	= NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
+	},
 	/* SWNCQ */
 	{
 		.flags	        = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -1530,6 +1551,17 @@
 	return 0;
 }
 
+static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class,
+				   unsigned long deadline)
+{
+	bool online;
+	int rc;
+
+	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
+				 &online, NULL);
+	return online ? -EAGAIN : rc;
+}
+
 static void nv_nf2_freeze(struct ata_port *ap)
 {
 	void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr;
@@ -1554,17 +1586,6 @@
 	iowrite8(mask, scr_addr + NV_INT_ENABLE);
 }
 
-static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class,
-			    unsigned long deadline)
-{
-	bool online;
-	int rc;
-
-	rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
-				 &online, NULL);
-	return online ? -EAGAIN : rc;
-}
-
 static void nv_ck804_freeze(struct ata_port *ap)
 {
 	void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR];
@@ -2355,14 +2376,9 @@
 	if (type == CK804 && adma_enabled) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n");
 		type = ADMA;
-	}
-
-	if (type == SWNCQ) {
-		if (swncq_enabled)
-			dev_printk(KERN_NOTICE, &pdev->dev,
-				   "Using SWNCQ mode\n");
-		else
-			type = GENERIC;
+	} else if (type == MCP5x && swncq_enabled) {
+		dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n");
+		type = SWNCQ;
 	}
 
 	ppi[0] = &nv_port_info[type];
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 564c142..bfd55b0 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -695,11 +695,38 @@
 	}
 }
 
+static bool sil_broken_system_poweroff(struct pci_dev *pdev)
+{
+	static const struct dmi_system_id broken_systems[] = {
+		{
+			.ident = "HP Compaq nx6325",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x12UL,
+		},
+
+		{ }	/* terminate list */
+	};
+	const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
+
+	if (dmi) {
+		unsigned long slot = (unsigned long)dmi->driver_data;
+		/* apply the quirk only to on-board controllers */
+		return slot == PCI_SLOT(pdev->devfn);
+	}
+
+	return false;
+}
+
 static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
 	int board_id = ent->driver_data;
-	const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL };
+	struct ata_port_info pi = sil_port_info[board_id];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ata_host *host;
 	void __iomem *mmio_base;
 	int n_ports, rc;
@@ -713,6 +740,13 @@
 	if (board_id == sil_3114)
 		n_ports = 4;
 
+	if (sil_broken_system_poweroff(pdev)) {
+		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN |
+					ATA_FLAG_NO_HIBERNATE_SPINDOWN;
+		dev_info(&pdev->dev, "quirky BIOS, skipping spindown "
+				"on poweroff and hibernation\n");
+	}
+
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 8079afc..55e5309 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -777,10 +777,16 @@
 int dev_set_name(struct device *dev, const char *fmt, ...)
 {
 	va_list vargs;
+	char *s;
 
 	va_start(vargs, fmt);
 	vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
 	va_end(vargs);
+
+	/* ewww... some of these buggers have / in the name... */
+	while ((s = strchr(dev->bus_id, '/')))
+		*s = '!';
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dev_set_name);
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index d4e7dca..ba68a46 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -102,7 +102,7 @@
 		return -EBUSY;
 
 	if (cpu_is_omap24xx()) {
-		rng_ick = clk_get(NULL, "rng_ick");
+		rng_ick = clk_get(&pdev->dev, "rng_ick");
 		if (IS_ERR(rng_ick)) {
 			dev_err(&pdev->dev, "Could not get rng_ick\n");
 			ret = PTR_ERR(rng_ick);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index d33e5ab..bc84e12 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1817,8 +1817,10 @@
 		/* check whether we're reopening an existing tty */
 		tty = tty_driver_lookup_tty(driver, inode, index);
 
-		if (IS_ERR(tty))
+		if (IS_ERR(tty)) {
+			mutex_unlock(&tty_mutex);
 			return PTR_ERR(tty);
+		}
 	}
 
 	if (tty) {
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index e34b064..48ea59e 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -62,6 +62,25 @@
 	---help---
 	  Enable support for the Marvell XOR engine.
 
+config MX3_IPU
+	bool "MX3x Image Processing Unit support"
+	depends on ARCH_MX3
+	select DMA_ENGINE
+	default y
+	help
+	  If you plan to use the Image Processing unit in the i.MX3x, say
+	  Y here. If unsure, select Y.
+
+config MX3_IPU_IRQS
+	int "Number of dynamically mapped interrupts for IPU"
+	depends on MX3_IPU
+	range 2 137
+	default 4
+	help
+	  Out of 137 interrupt sources on i.MX31 IPU only very few are used.
+	  To avoid bloating the irq_desc[] array we allocate a sufficient
+	  number of IRQ slots and map them dynamically to specific sources.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 14f5952..2e5dc96 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,3 +7,4 @@
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_MX3_IPU) += ipu/
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 403dbe7..a589930 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -329,9 +329,6 @@
 	struct dma_chan *chan;
 	int cpu;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	cpu = get_cpu();
 	chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan;
 	put_cpu();
@@ -348,9 +345,6 @@
 	struct dma_device *device;
 	struct dma_chan *chan;
 
-	WARN_ONCE(dmaengine_ref_count == 0,
-		  "client called %s without a reference", __func__);
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(device, &dma_device_list, global_node) {
 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask))
@@ -961,6 +955,8 @@
 	if (!dep)
 		return;
 
+	/* we'll submit tx->next now, so clear the link */
+	tx->next = NULL;
 	chan = dep->chan;
 
 	/* keep submitting up until a channel switch is detected
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 3603f1e..732fa1e 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -217,6 +217,10 @@
 	chan = thread->chan;
 
 	while (!kthread_should_stop()) {
+		struct dma_device *dev = chan->device;
+		struct dma_async_tx_descriptor *tx;
+		dma_addr_t dma_src, dma_dest;
+
 		total_tests++;
 
 		len = dmatest_random() % test_buf_size + 1;
@@ -226,10 +230,30 @@
 		dmatest_init_srcbuf(thread->srcbuf, src_off, len);
 		dmatest_init_dstbuf(thread->dstbuf, dst_off, len);
 
-		cookie = dma_async_memcpy_buf_to_buf(chan,
-				thread->dstbuf + dst_off,
-				thread->srcbuf + src_off,
-				len);
+		dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off,
+				len, DMA_TO_DEVICE);
+		/* map with DMA_BIDIRECTIONAL to force writeback/invalidate */
+		dma_dest = dma_map_single(dev->dev, thread->dstbuf,
+				test_buf_size, DMA_BIDIRECTIONAL);
+
+		tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off,
+				dma_src, len,
+				DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP);
+		if (!tx) {
+			dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
+			dma_unmap_single(dev->dev, dma_dest,
+					test_buf_size, DMA_BIDIRECTIONAL);
+			pr_warning("%s: #%u: prep error with src_off=0x%x "
+					"dst_off=0x%x len=0x%x\n",
+					thread_name, total_tests - 1,
+					src_off, dst_off, len);
+			msleep(100);
+			failed_tests++;
+			continue;
+		}
+		tx->callback = NULL;
+		cookie = tx->tx_submit(tx);
+
 		if (dma_submit_error(cookie)) {
 			pr_warning("%s: #%u: submit error %d with src_off=0x%x "
 					"dst_off=0x%x len=0x%x\n",
@@ -253,6 +277,9 @@
 			failed_tests++;
 			continue;
 		}
+		/* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */
+		dma_unmap_single(dev->dev, dma_dest,
+				test_buf_size, DMA_BIDIRECTIONAL);
 
 		error_count = 0;
 
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index ca70a21..70126a6 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -822,7 +822,7 @@
 	 */
 	WARN_ON(fdev->feature != new_fsl_chan->feature);
 
-	new_fsl_chan->dev = &new_fsl_chan->common.dev->device;
+	new_fsl_chan->dev = fdev->dev;
 	new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
 			new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
 
@@ -875,7 +875,8 @@
 	}
 
 	dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
-				compatible, new_fsl_chan->irq);
+		 compatible,
+		 new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq);
 
 	return 0;
 
@@ -890,7 +891,8 @@
 
 static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan)
 {
-	free_irq(fchan->irq, fchan);
+	if (fchan->irq != NO_IRQ)
+		free_irq(fchan->irq, fchan);
 	list_del(&fchan->common.device_node);
 	iounmap(fchan->reg_base);
 	kfree(fchan);
diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile
new file mode 100644
index 0000000..6704cf4
--- /dev/null
+++ b/drivers/dma/ipu/Makefile
@@ -0,0 +1 @@
+obj-y	+= ipu_irq.o ipu_idmac.o
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
new file mode 100644
index 0000000..1f154d0
--- /dev/null
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -0,0 +1,1740 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+#define FS_VF_IN_VALID	0x00000002
+#define FS_ENC_IN_VALID	0x00000001
+
+/*
+ * There can be only one, we could allocate it dynamically, but then we'd have
+ * to add an extra parameter to some functions, and use something as ugly as
+ *	struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device));
+ * in the ISR
+ */
+static struct ipu ipu_data;
+
+#define to_ipu(id) container_of(id, struct ipu, idmac)
+
+static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ic + reg);
+}
+
+#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF)
+
+static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ic + reg);
+}
+
+#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF)
+
+static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+/*****************************************************************************
+ * IPU / IC common functions
+ */
+static void dump_idmac_reg(struct ipu *ipu)
+{
+	dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, "
+		"IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n",
+		idmac_read_icreg(ipu, IDMAC_CONF),
+		idmac_read_icreg(ipu, IC_CONF),
+		idmac_read_icreg(ipu, IDMAC_CHA_EN),
+		idmac_read_icreg(ipu, IDMAC_CHA_PRI),
+		idmac_read_icreg(ipu, IDMAC_CHA_BUSY));
+	dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, "
+		"DB_MODE 0x%x, TASKS_STAT 0x%x\n",
+		idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+		idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF),
+		idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL),
+		idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+}
+
+static uint32_t bytes_per_pixel(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_GENERIC:	/* generic data */
+	case IPU_PIX_FMT_RGB332:
+	case IPU_PIX_FMT_YUV420P:
+	case IPU_PIX_FMT_YUV422P:
+	default:
+		return 1;
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_YUYV:
+	case IPU_PIX_FMT_UYVY:
+		return 2;
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+		return 3;
+	case IPU_PIX_FMT_GENERIC_32:	/* generic data */
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+	case IPU_PIX_FMT_ABGR32:
+		return 4;
+	}
+}
+
+/* Enable / disable direct write to memory by the Camera Sensor Interface */
+static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t ic_conf, mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+		mask = IC_CONF_PRPENC_EN;
+		break;
+	case IDMAC_IC_7:
+		mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN;
+		break;
+	default:
+		return;
+	}
+	ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask;
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+}
+
+static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel)
+{
+	uint32_t stat = TASK_STAT_IDLE;
+	uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >>
+			TSTAT_CSI2MEM_OFFSET;
+		break;
+	case IDMAC_IC_0:
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+	return stat;
+}
+
+struct chan_param_mem_planar {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	res1:2;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	ubo_l:11;
+
+	u32	ubo_h:15;
+	u32	vbo_l:17;
+
+	u32	vbo_h:9;
+	u32	res2:3;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+	/* Word 0 */
+	u32	xv:10;
+	u32	yv:10;
+	u32	xb:12;
+
+	u32	yb:12;
+	u32	sce:1;
+	u32	res1:1;
+	u32	nsb:1;
+	u32	lnpb:6;
+	u32	sx:10;
+	u32	sy_l:1;
+
+	u32	sy_h:9;
+	u32	ns:10;
+	u32	sm:10;
+	u32	sdx_l:3;
+
+	u32	sdx_h:2;
+	u32	sdy:5;
+	u32	sdrx:1;
+	u32	sdry:1;
+	u32	sdr1:1;
+	u32	res2:2;
+	u32	fw:12;
+	u32	fh_l:8;
+
+	u32	fh_h:4;
+	u32	res3:28;
+
+	/* Word 1 */
+	u32	eba0;
+
+	u32	eba1;
+
+	u32	bpp:3;
+	u32	sl:14;
+	u32	pfs:3;
+	u32	bam:3;
+	u32	res4:2;
+	u32	npb:6;
+	u32	res5:1;
+
+	u32	sat:2;
+	u32	scc:1;
+	u32	ofs0:5;
+	u32	ofs1:5;
+	u32	ofs2:5;
+	u32	ofs3:5;
+	u32	wid0:3;
+	u32	wid1:3;
+	u32	wid2:3;
+
+	u32	wid3:3;
+	u32	dec_sel:1;
+	u32	res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+	struct chan_param_mem_planar		pp;
+	struct chan_param_mem_interleaved	ip;
+};
+
+static void ipu_ch_param_set_plane_offset(union chan_param_mem *params,
+					  u32 u_offset, u32 v_offset)
+{
+	params->pp.ubo_l = u_offset & 0x7ff;
+	params->pp.ubo_h = u_offset >> 11;
+	params->pp.vbo_l = v_offset & 0x1ffff;
+	params->pp.vbo_h = v_offset >> 17;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+				  uint32_t pixel_fmt, uint16_t width,
+				  uint16_t height, uint16_t stride)
+{
+	u32 u_offset;
+	u32 v_offset;
+
+	params->pp.fw		= width - 1;
+	params->pp.fh_l		= height - 1;
+	params->pp.fh_h		= (height - 1) >> 8;
+	params->pp.sl		= stride - 1;
+
+	switch (pixel_fmt) {
+	case IPU_PIX_FMT_GENERIC:
+		/*Represents 8-bit Generic data */
+		params->pp.bpp	= 3;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 31;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_GENERIC_32:
+		/*Represents 32-bit Generic data */
+		params->pp.bpp	= 0;
+		params->pp.pfs	= 7;
+		params->pp.npb	= 7;
+		params->pp.sat	= 2;		/* SAT = use 32-bit access */
+		break;
+	case IPU_PIX_FMT_RGB565:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 5;		/* Green bit offset */
+		params->ip.ofs2	= 11;		/* Blue bit offset */
+		params->ip.ofs3	= 16;		/* Alpha bit offset */
+		params->ip.wid0	= 4;		/* Red bit width - 1 */
+		params->ip.wid1	= 5;		/* Green bit width - 1 */
+		params->ip.wid2	= 4;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGR24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 0;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 16;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGB24:
+		params->ip.bpp	= 1;		/* 24 BPP & RGB PFS */
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 16;		/* Red bit offset */
+		params->ip.ofs1	= 8;		/* Green bit offset */
+		params->ip.ofs2	= 0;		/* Blue bit offset */
+		params->ip.ofs3	= 24;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		break;
+	case IPU_PIX_FMT_BGRA32:
+	case IPU_PIX_FMT_BGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_RGBA32:
+	case IPU_PIX_FMT_RGB32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 24;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 8;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_ABGR32:
+		params->ip.bpp	= 0;
+		params->ip.pfs	= 4;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		params->ip.ofs0	= 8;		/* Red bit offset */
+		params->ip.ofs1	= 16;		/* Green bit offset */
+		params->ip.ofs2	= 24;		/* Blue bit offset */
+		params->ip.ofs3	= 0;		/* Alpha bit offset */
+		params->ip.wid0	= 7;		/* Red bit width - 1 */
+		params->ip.wid1	= 7;		/* Green bit width - 1 */
+		params->ip.wid2	= 7;		/* Blue bit width - 1 */
+		params->ip.wid3	= 7;		/* Alpha bit width - 1 */
+		break;
+	case IPU_PIX_FMT_UYVY:
+		params->ip.bpp	= 2;
+		params->ip.pfs	= 6;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		break;
+	case IPU_PIX_FMT_YUV420P2:
+	case IPU_PIX_FMT_YUV420P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 3;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 4;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YVU422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		v_offset = stride * height;
+		u_offset = v_offset + v_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	case IPU_PIX_FMT_YUV422P:
+		params->ip.bpp	= 3;
+		params->ip.pfs	= 2;
+		params->ip.npb	= 7;
+		params->ip.sat	= 2;		/* SAT = 32-bit access */
+		u_offset = stride * height;
+		v_offset = u_offset + u_offset / 2;
+		ipu_ch_param_set_plane_offset(params, u_offset, v_offset);
+		break;
+	default:
+		dev_err(ipu_data.dev,
+			"mxc ipu: unimplemented pixel format %d\n", pixel_fmt);
+		break;
+	}
+
+	params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_burst_size(union chan_param_mem *params,
+					uint16_t burst_pixels)
+{
+	params->pp.npb = burst_pixels - 1;
+};
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+				    dma_addr_t buf0, dma_addr_t buf1)
+{
+	params->pp.eba0 = buf0;
+	params->pp.eba1 = buf1;
+};
+
+static void ipu_ch_param_set_rotation(union chan_param_mem *params,
+				      enum ipu_rotate_mode rotate)
+{
+	params->pp.bam = rotate;
+};
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+				uint32_t num_words)
+{
+	for (; num_words > 0; num_words--) {
+		dev_dbg(ipu_data.dev,
+			"write param mem - addr = 0x%08X, data = 0x%08X\n",
+			addr, *data);
+		idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA);
+		addr++;
+		if ((addr & 0x7) == 5) {
+			addr &= ~0x7;	/* set to word 0 */
+			addr += 8;	/* increment to next row */
+		}
+	}
+}
+
+static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size,
+			      uint32_t *resize_coeff,
+			      uint32_t *downsize_coeff)
+{
+	uint32_t temp_size;
+	uint32_t temp_downsize;
+
+	*resize_coeff	= 1 << 13;
+	*downsize_coeff	= 1 << 13;
+
+	/* Cannot downsize more than 8:1 */
+	if (out_size << 3 < in_size)
+		return -EINVAL;
+
+	/* compute downsizing coefficient */
+	temp_downsize = 0;
+	temp_size = in_size;
+	while (temp_size >= out_size * 2 && temp_downsize < 2) {
+		temp_size >>= 1;
+		temp_downsize++;
+	}
+	*downsize_coeff = temp_downsize;
+
+	/*
+	 * compute resizing coefficient using the following formula:
+	 * resize_coeff = M*(SI -1)/(SO - 1)
+	 * where M = 2^13, SI - input size, SO - output size
+	 */
+	*resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1);
+	if (*resize_coeff >= 16384L) {
+		dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n");
+		*resize_coeff = 0x3FFF;
+	}
+
+	dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, "
+		"downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size,
+		*downsize_coeff, *resize_coeff >= 8192L ? 1 : 0,
+		((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff);
+
+	return 0;
+}
+
+static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt)
+{
+	switch (fmt) {
+	case IPU_PIX_FMT_RGB565:
+	case IPU_PIX_FMT_BGR24:
+	case IPU_PIX_FMT_RGB24:
+	case IPU_PIX_FMT_BGR32:
+	case IPU_PIX_FMT_RGB32:
+		return IPU_COLORSPACE_RGB;
+	default:
+		return IPU_COLORSPACE_YCBCR;
+	}
+}
+
+static int ipu_ic_init_prpenc(struct ipu *ipu,
+			      union ipu_channel_param *params, bool src_is_csi)
+{
+	uint32_t reg, ic_conf;
+	uint32_t downsize_coeff, resize_coeff;
+	enum ipu_color_space in_fmt, out_fmt;
+
+	/* Setup vertical resizing */
+	calc_resize_coeffs(params->video.in_height,
+			    params->video.out_height,
+			    &resize_coeff, &downsize_coeff);
+	reg = (downsize_coeff << 30) | (resize_coeff << 16);
+
+	/* Setup horizontal resizing */
+	calc_resize_coeffs(params->video.in_width,
+			    params->video.out_width,
+			    &resize_coeff, &downsize_coeff);
+	reg |= (downsize_coeff << 14) | resize_coeff;
+
+	/* Setup color space conversion */
+	in_fmt = format_to_colorspace(params->video.in_pixel_fmt);
+	out_fmt = format_to_colorspace(params->video.out_pixel_fmt);
+
+	/*
+	 * Colourspace conversion unsupported yet - see _init_csc() in
+	 * Freescale sources
+	 */
+	if (in_fmt != out_fmt) {
+		dev_err(ipu->dev, "Colourspace conversion unsupported!\n");
+		return -EOPNOTSUPP;
+	}
+
+	idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC);
+
+	ic_conf = idmac_read_icreg(ipu, IC_CONF);
+
+	if (src_is_csi)
+		ic_conf &= ~IC_CONF_RWS_EN;
+	else
+		ic_conf |= IC_CONF_RWS_EN;
+
+	idmac_write_icreg(ipu, ic_conf, IC_CONF);
+
+	return 0;
+}
+
+static uint32_t dma_param_addr(uint32_t dma_ch)
+{
+	/* Channel Parameter Memory */
+	return 0x10000 | (dma_ch << 4);
+};
+
+static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel,
+				     bool prio)
+{
+	u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI);
+
+	if (prio)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI);
+
+	dump_idmac_reg(ipu);
+}
+
+static uint32_t ipu_channel_conf_mask(enum ipu_channel channel)
+{
+	uint32_t mask;
+
+	switch (channel) {
+	case IDMAC_IC_0:
+	case IDMAC_IC_7:
+		mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN;
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+		break;
+	default:
+		mask = 0;
+		break;
+	}
+
+	return mask;
+}
+
+/**
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel:	channel ID.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	struct ipu *ipu = to_ipu(idmac);
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Reset to buffer 0 */
+	idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF);
+	ichan->active_buffer = 0;
+	ichan->status = IPU_CHANNEL_ENABLED;
+
+	switch (channel) {
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	case IDMAC_IC_7:
+		ipu_channel_set_priority(ipu, channel, true);
+	default:
+		break;
+	}
+
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+
+	idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN);
+
+	ipu_ic_enable_task(ipu, channel);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+	return 0;
+}
+
+/**
+ * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel.
+ * @channel:	channel ID.
+ * @pixel_fmt:	pixel format of buffer. Pixel format is a FOURCC ASCII code.
+ * @width:	width of buffer in pixels.
+ * @height:	height of buffer in pixels.
+ * @stride:	stride length of buffer in pixels.
+ * @rot_mode:	rotation mode of buffer. A rotation setting other than
+ *		IPU_ROTATE_VERT_FLIP should only be used for input buffers of
+ *		rotation channels.
+ * @phyaddr_0:	buffer 0 physical address.
+ * @phyaddr_1:	buffer 1 physical address. Setting this to a value other than
+ *		NULL enables double buffering mode.
+ * @return:	0 on success or negative error code on failure.
+ */
+static int ipu_init_channel_buffer(struct idmac_channel *ichan,
+				   enum pixel_fmt pixel_fmt,
+				   uint16_t width, uint16_t height,
+				   uint32_t stride,
+				   enum ipu_rotate_mode rot_mode,
+				   dma_addr_t phyaddr_0, dma_addr_t phyaddr_1)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+	struct ipu *ipu = to_ipu(idmac);
+	union chan_param_mem params = {};
+	unsigned long flags;
+	uint32_t reg;
+	uint32_t stride_bytes;
+
+	stride_bytes = stride * bytes_per_pixel(pixel_fmt);
+
+	if (stride_bytes % 4) {
+		dev_err(ipu->dev,
+			"Stride length must be 32-bit aligned, stride = %d, bytes = %d\n",
+			stride, stride_bytes);
+		return -EINVAL;
+	}
+
+	/* IC channel's stride must be a multiple of 8 pixels */
+	if ((channel <= 13) && (stride % 8)) {
+		dev_err(ipu->dev, "Stride must be 8 pixel multiple\n");
+		return -EINVAL;
+	}
+
+	/* Build parameter memory data for DMA channel */
+	ipu_ch_param_set_size(&params, pixel_fmt, width, height, stride_bytes);
+	ipu_ch_param_set_buffer(&params, phyaddr_0, phyaddr_1);
+	ipu_ch_param_set_rotation(&params, rot_mode);
+	/* Some channels (rotation) have restriction on burst length */
+	switch (channel) {
+	case IDMAC_IC_7:	/* Hangs with burst 8, 16, other values
+				   invalid - Table 44-30 */
+/*
+		ipu_ch_param_set_burst_size(&params, 8);
+ */
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		/* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+		ipu_ch_param_set_burst_size(&params, 16);
+		break;
+	case IDMAC_IC_0:
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+
+	if (phyaddr_1)
+		reg |= 1UL << channel;
+	else
+		reg &= ~(1UL << channel);
+
+	idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL);
+
+	ichan->status = IPU_CHANNEL_READY;
+
+	spin_unlock_irqrestore(ipu->lock, flags);
+
+	return 0;
+}
+
+/**
+ * ipu_select_buffer() - mark a channel's buffer as ready.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to mark ready.
+ */
+static void ipu_select_buffer(enum ipu_channel channel, int buffer_n)
+{
+	/* No locking - this is a write-one-to-set register, cleared by IPU */
+	if (buffer_n == 0)
+		/* Mark buffer 0 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY);
+	else
+		/* Mark buffer 1 as ready. */
+		idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY);
+}
+
+/**
+ * ipu_update_channel_buffer() - update physical address of a channel buffer.
+ * @channel:	channel ID.
+ * @buffer_n:	buffer number to update.
+ *		0 or 1 are the only valid values.
+ * @phyaddr:	buffer physical address.
+ * @return:	Returns 0 on success or negative error code on failure. This
+ *              function will fail if the buffer is set to ready.
+ */
+/* Called under spin_lock(_irqsave)(&ichan->lock) */
+static int ipu_update_channel_buffer(enum ipu_channel channel,
+				     int buffer_n, dma_addr_t phyaddr)
+{
+	uint32_t reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ipu_data.lock, flags);
+
+	if (buffer_n == 0) {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0008UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	} else {
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY);
+		if (reg & (1UL << channel)) {
+			spin_unlock_irqrestore(&ipu_data.lock, flags);
+			return -EACCES;
+		}
+
+		/* Check if double-buffering is already enabled */
+		reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL);
+
+		if (!(reg & (1UL << channel)))
+			idmac_write_ipureg(&ipu_data, reg | (1UL << channel),
+					   IPU_CHA_DB_MODE_SEL);
+
+		/* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */
+		idmac_write_ipureg(&ipu_data, dma_param_addr(channel) +
+				   0x0009UL, IPU_IMA_ADDR);
+		idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA);
+	}
+
+	spin_unlock_irqrestore(&ipu_data.lock, flags);
+
+	return 0;
+}
+
+/* Called under spin_lock_irqsave(&ichan->lock) */
+static int ipu_submit_channel_buffers(struct idmac_channel *ichan,
+				      struct idmac_tx_desc *desc)
+{
+	struct scatterlist *sg;
+	int i, ret = 0;
+
+	for (i = 0, sg = desc->sg; i < 2 && sg; i++) {
+		if (!ichan->sg[i]) {
+			ichan->sg[i] = sg;
+
+			/*
+			 * On first invocation this shouldn't be necessary, the
+			 * call to ipu_init_channel_buffer() above will set
+			 * addresses for us, so we could make it conditional
+			 * on status >= IPU_CHANNEL_ENABLED, but doing it again
+			 * shouldn't hurt either.
+			 */
+			ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i,
+							sg_dma_address(sg));
+			if (ret < 0)
+				return ret;
+
+			ipu_select_buffer(ichan->dma_chan.chan_id, i);
+
+			sg = sg_next(sg);
+		}
+	}
+
+	return ret;
+}
+
+static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct idmac_tx_desc *desc = to_tx_desc(tx);
+	struct idmac_channel *ichan = to_idmac_chan(tx->chan);
+	struct idmac *idmac = to_idmac(tx->chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	dma_cookie_t cookie;
+	unsigned long flags;
+
+	/* Sanity check */
+	if (!list_empty(&desc->list)) {
+		/* The descriptor doesn't belong to client */
+		dev_err(&ichan->dma_chan.dev->device,
+			"Descriptor %p not prepared!\n", tx);
+		return -EBUSY;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	if (ichan->status < IPU_CHANNEL_READY) {
+		struct idmac_video_param *video = &ichan->params.video;
+		/*
+		 * Initial buffer assignment - the first two sg-entries from
+		 * the descriptor will end up in the IDMAC buffers
+		 */
+		dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 :
+			sg_dma_address(&desc->sg[1]);
+
+		WARN_ON(ichan->sg[0] || ichan->sg[1]);
+
+		cookie = ipu_init_channel_buffer(ichan,
+						 video->out_pixel_fmt,
+						 video->out_width,
+						 video->out_height,
+						 video->out_stride,
+						 IPU_ROTATE_NONE,
+						 sg_dma_address(&desc->sg[0]),
+						 dma_1);
+		if (cookie < 0)
+			goto out;
+	}
+
+	/* ipu->lock can be taken under ichan->lock, but not v.v. */
+	spin_lock_irqsave(&ichan->lock, flags);
+
+	/* submit_buffers() atomically verifies and fills empty sg slots */
+	cookie = ipu_submit_channel_buffers(ichan, desc);
+
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (cookie < 0)
+		goto out;
+
+	cookie = ichan->dma_chan.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	/* from dmaengine.h: "last cookie value returned to client" */
+	ichan->dma_chan.cookie = cookie;
+	tx->cookie = cookie;
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_add_tail(&desc->list, &ichan->queue);
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	if (ichan->status < IPU_CHANNEL_ENABLED) {
+		int ret = ipu_enable_channel(idmac, ichan);
+		if (ret < 0) {
+			cookie = ret;
+			spin_lock_irqsave(&ichan->lock, flags);
+			list_del_init(&desc->list);
+			spin_unlock_irqrestore(&ichan->lock, flags);
+			tx->cookie = cookie;
+			ichan->dma_chan.cookie = cookie;
+		}
+	}
+
+	dump_idmac_reg(ipu);
+
+out:
+	mutex_unlock(&ichan->chan_mutex);
+
+	return cookie;
+}
+
+/* Called with ichan->chan_mutex held */
+static int idmac_desc_alloc(struct idmac_channel *ichan, int n)
+{
+	struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc));
+	struct idmac *idmac = to_idmac(ichan->dma_chan.device);
+
+	if (!desc)
+		return -ENOMEM;
+
+	/* No interrupts, just disable the tasklet for a moment */
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	ichan->n_tx_desc = n;
+	ichan->desc = desc;
+	INIT_LIST_HEAD(&ichan->queue);
+	INIT_LIST_HEAD(&ichan->free_list);
+
+	while (n--) {
+		struct dma_async_tx_descriptor *txd = &desc->txd;
+
+		memset(txd, 0, sizeof(*txd));
+		dma_async_tx_descriptor_init(txd, &ichan->dma_chan);
+		txd->tx_submit		= idmac_tx_submit;
+		txd->chan		= &ichan->dma_chan;
+		INIT_LIST_HEAD(&txd->tx_list);
+
+		list_add(&desc->list, &ichan->free_list);
+
+		desc++;
+	}
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	return 0;
+}
+
+/**
+ * ipu_init_channel() - initialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ * @return      0 on success or negative error code on failure.
+ */
+static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	union ipu_channel_param *params = &ichan->params;
+	uint32_t ipu_conf;
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	struct ipu *ipu = to_ipu(idmac);
+	int ret = 0, n_desc = 0;
+
+	dev_dbg(ipu->dev, "init channel = %d\n", channel);
+
+	if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 &&
+	    channel != IDMAC_IC_7)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		n_desc = 16;
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		n_desc = 16;
+		reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW);
+		idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW);
+		ret = ipu_ic_init_prpenc(ipu, params, true);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+		n_desc = 4;
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask |= 1L << channel;
+
+	/* Enable IPU sub module */
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) |
+		ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	if (n_desc && !ichan->desc)
+		ret = idmac_desc_alloc(ichan, n_desc);
+
+	dump_idmac_reg(ipu);
+
+	return ret;
+}
+
+/**
+ * ipu_uninit_channel() - uninitialize an IPU channel.
+ * @idmac:	IPU DMAC context.
+ * @ichan:	pointer to the channel object.
+ */
+static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	unsigned long flags;
+	uint32_t reg;
+	unsigned long chan_mask = 1UL << channel;
+	uint32_t ipu_conf;
+	struct ipu *ipu = to_ipu(idmac);
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	if (!(ipu->channel_init_mask & chan_mask)) {
+		dev_err(ipu->dev, "Channel already uninitialized %d\n",
+			channel);
+		spin_unlock_irqrestore(&ipu->lock, flags);
+		return;
+	}
+
+	/* Reset the double buffer */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL);
+	idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL);
+
+	ichan->sec_chan_en = false;
+
+	switch (channel) {
+	case IDMAC_IC_7:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN),
+			     IC_CONF);
+		break;
+	case IDMAC_IC_0:
+		reg = idmac_read_icreg(ipu, IC_CONF);
+		idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1),
+				  IC_CONF);
+		break;
+	case IDMAC_SDC_0:
+	case IDMAC_SDC_1:
+	default:
+		break;
+	}
+
+	ipu->channel_init_mask &= ~(1L << channel);
+
+	ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) &
+		~ipu_channel_conf_mask(channel);
+	idmac_write_ipureg(ipu, ipu_conf, IPU_CONF);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	ichan->n_tx_desc = 0;
+	vfree(ichan->desc);
+	ichan->desc = NULL;
+}
+
+/**
+ * ipu_disable_channel() - disable an IPU channel.
+ * @idmac:		IPU DMAC context.
+ * @ichan:		channel object pointer.
+ * @wait_for_stop:	flag to set whether to wait for channel end of frame or
+ *			return immediately.
+ * @return:		0 on success or negative error code on failure.
+ */
+static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan,
+			       bool wait_for_stop)
+{
+	enum ipu_channel channel = ichan->dma_chan.chan_id;
+	struct ipu *ipu = to_ipu(idmac);
+	uint32_t reg;
+	unsigned long flags;
+	unsigned long chan_mask = 1UL << channel;
+	unsigned int timeout;
+
+	if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) {
+		timeout = 40;
+		/* This waiting always fails. Related to spurious irq problem */
+		while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) ||
+		       (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) {
+			timeout--;
+			msleep(10);
+
+			if (!timeout) {
+				dev_dbg(ipu->dev,
+					"Warning: timeout waiting for channel %u to "
+					"stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, "
+					"busy = 0x%08X, tstat = 0x%08X\n", channel,
+					idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY),
+					idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY),
+					idmac_read_icreg(ipu, IDMAC_CHA_BUSY),
+					idmac_read_ipureg(ipu, IPU_TASKS_STAT));
+				break;
+			}
+		}
+		dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout);
+	}
+	/* SDC BG and FG must be disabled before DMA is disabled */
+	if (wait_for_stop && (channel == IDMAC_SDC_0 ||
+			      channel == IDMAC_SDC_1)) {
+		for (timeout = 5;
+		     timeout && !ipu_irq_status(ichan->eof_irq); timeout--)
+			msleep(5);
+	}
+
+	spin_lock_irqsave(&ipu->lock, flags);
+
+	/* Disable IC task */
+	ipu_ic_disable_task(ipu, channel);
+
+	/* Disable DMA channel(s) */
+	reg = idmac_read_icreg(ipu, IDMAC_CHA_EN);
+	idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN);
+
+	/*
+	 * Problem (observed with channel DMAIC_7): after enabling the channel
+	 * and initialising buffers, there comes an interrupt with current still
+	 * pointing at buffer 0, whereas it should use buffer 0 first and only
+	 * generate an interrupt when it is done, then current should already
+	 * point to buffer 1. This spurious interrupt also comes on channel
+	 * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the
+	 * first interrupt, there comes the second with current correctly
+	 * pointing to buffer 1 this time. But sometimes this second interrupt
+	 * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling
+	 * the channel seems to prevent the channel from hanging, but it doesn't
+	 * prevent the spurious interrupt. This might also be unsafe. Think
+	 * about the IDMAC controller trying to switch to a buffer, when we
+	 * clear the ready bit, and re-enable it a moment later.
+	 */
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY);
+
+	reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY);
+	idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY);
+
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	return 0;
+}
+
+/*
+ * We have several possibilities here:
+ * current BUF		next BUF
+ *
+ * not last sg		next not last sg
+ * not last sg		next last sg
+ * last sg		first sg from next descriptor
+ * last sg		NULL
+ *
+ * Besides, the descriptor queue might be empty or not. We process all these
+ * cases carefully.
+ */
+static irqreturn_t idmac_interrupt(int irq, void *dev_id)
+{
+	struct idmac_channel *ichan = dev_id;
+	unsigned int chan_id = ichan->dma_chan.chan_id;
+	struct scatterlist **sg, *sgnext, *sgnew = NULL;
+	/* Next transfer descriptor */
+	struct idmac_tx_desc *desc = NULL, *descnew;
+	dma_async_tx_callback callback;
+	void *callback_param;
+	bool done = false;
+	u32	ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY),
+		ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY),
+		curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+
+	/* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */
+
+	pr_debug("IDMAC irq %d\n", irq);
+	/* Other interrupts do not interfere with this channel */
+	spin_lock(&ichan->lock);
+
+	if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
+		     ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+		int i = 100;
+
+		/* This doesn't help. See comment in ipu_disable_channel() */
+		while (--i) {
+			curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF);
+			if (((curbuf >> chan_id) & 1) != ichan->active_buffer)
+				break;
+			cpu_relax();
+		}
+
+		if (!i) {
+			spin_unlock(&ichan->lock);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"IRQ on active buffer on channel %x, active "
+				"%d, ready %x, %x, current %x!\n", chan_id,
+				ichan->active_buffer, ready0, ready1, curbuf);
+			return IRQ_NONE;
+		}
+	}
+
+	if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) ||
+		     (!ichan->active_buffer && (ready0 >> chan_id) & 1)
+		     )) {
+		spin_unlock(&ichan->lock);
+		dev_dbg(ichan->dma_chan.device->dev,
+			"IRQ with active buffer still ready on channel %x, "
+			"active %d, ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	if (unlikely(list_empty(&ichan->queue))) {
+		spin_unlock(&ichan->lock);
+		dev_err(ichan->dma_chan.device->dev,
+			"IRQ without queued buffers on channel %x, active %d, "
+			"ready %x, %x!\n", chan_id,
+			ichan->active_buffer, ready0, ready1);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * active_buffer is a software flag, it shows which buffer we are
+	 * currently expecting back from the hardware, IDMAC should be
+	 * processing the other buffer already
+	 */
+	sg = &ichan->sg[ichan->active_buffer];
+	sgnext = ichan->sg[!ichan->active_buffer];
+
+	/*
+	 * if sgnext == NULL sg must be the last element in a scatterlist and
+	 * queue must be empty
+	 */
+	if (unlikely(!sgnext)) {
+		if (unlikely(sg_next(*sg))) {
+			dev_err(ichan->dma_chan.device->dev,
+				"Broken buffer-update locking on channel %x!\n",
+				chan_id);
+			/* We'll let the user catch up */
+		} else {
+			/* Underrun */
+			ipu_ic_disable_task(&ipu_data, chan_id);
+			dev_dbg(ichan->dma_chan.device->dev,
+				"Underrun on channel %x\n", chan_id);
+			ichan->status = IPU_CHANNEL_READY;
+			/* Continue to check for complete descriptor */
+		}
+	}
+
+	desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list);
+
+	/* First calculate and submit the next sg element */
+	if (likely(sgnext))
+		sgnew = sg_next(sgnext);
+
+	if (unlikely(!sgnew)) {
+		/* Start a new scatterlist, if any queued */
+		if (likely(desc->list.next != &ichan->queue)) {
+			descnew = list_entry(desc->list.next,
+					     struct idmac_tx_desc, list);
+			sgnew = &descnew->sg[0];
+		}
+	}
+
+	if (unlikely(!sg_next(*sg)) || !sgnext) {
+		/*
+		 * Last element in scatterlist done, remove from the queue,
+		 * _init for debugging
+		 */
+		list_del_init(&desc->list);
+		done = true;
+	}
+
+	*sg = sgnew;
+
+	if (likely(sgnew)) {
+		int ret;
+
+		ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer,
+						sg_dma_address(*sg));
+		if (ret < 0)
+			dev_err(ichan->dma_chan.device->dev,
+				"Failed to update buffer on channel %x buffer %d!\n",
+				chan_id, ichan->active_buffer);
+		else
+			ipu_select_buffer(chan_id, ichan->active_buffer);
+	}
+
+	/* Flip the active buffer - even if update above failed */
+	ichan->active_buffer = !ichan->active_buffer;
+	if (done)
+		ichan->completed = desc->txd.cookie;
+
+	callback = desc->txd.callback;
+	callback_param = desc->txd.callback_param;
+
+	spin_unlock(&ichan->lock);
+
+	if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback)
+		callback(callback_param);
+
+	return IRQ_HANDLED;
+}
+
+static void ipu_gc_tasklet(unsigned long arg)
+{
+	struct ipu *ipu = (struct ipu *)arg;
+	int i;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct idmac_tx_desc *desc;
+		unsigned long flags;
+		int j;
+
+		for (j = 0; j < ichan->n_tx_desc; j++) {
+			desc = ichan->desc + j;
+			spin_lock_irqsave(&ichan->lock, flags);
+			if (async_tx_test_ack(&desc->txd)) {
+				list_move(&desc->list, &ichan->free_list);
+				async_tx_clear_ack(&desc->txd);
+			}
+			spin_unlock_irqrestore(&ichan->lock, flags);
+		}
+	}
+}
+
+/*
+ * At the time .device_alloc_chan_resources() method is called, we cannot know,
+ * whether the client will accept the channel. Thus we must only check, if we
+ * can satisfy client's request but the only real criterion to verify, whether
+ * the client has accepted our offer is the client_count. That's why we have to
+ * perform the rest of our allocation tasks on the first call to this function.
+ */
+static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan,
+		struct scatterlist *sgl, unsigned int sg_len,
+		enum dma_data_direction direction, unsigned long tx_flags)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac_tx_desc *desc = NULL;
+	struct dma_async_tx_descriptor *txd = NULL;
+	unsigned long flags;
+
+	/* We only can handle these three channels so far */
+	if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 &&
+	    ichan->dma_chan.chan_id != IDMAC_IC_7)
+		return NULL;
+
+	if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) {
+		dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction);
+		return NULL;
+	}
+
+	mutex_lock(&ichan->chan_mutex);
+
+	spin_lock_irqsave(&ichan->lock, flags);
+	if (!list_empty(&ichan->free_list)) {
+		desc = list_entry(ichan->free_list.next,
+				  struct idmac_tx_desc, list);
+
+		list_del_init(&desc->list);
+
+		desc->sg_len	= sg_len;
+		desc->sg	= sgl;
+		txd		= &desc->txd;
+		txd->flags	= tx_flags;
+	}
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet);
+
+	return txd;
+}
+
+/* Re-select the current buffer and re-activate the channel */
+static void idmac_issue_pending(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	struct ipu *ipu = to_ipu(idmac);
+	unsigned long flags;
+
+	/* This is not always needed, but doesn't hurt either */
+	spin_lock_irqsave(&ipu->lock, flags);
+	ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer);
+	spin_unlock_irqrestore(&ipu->lock, flags);
+
+	/*
+	 * Might need to perform some parts of initialisation from
+	 * ipu_enable_channel(), but not all, we do not want to reset to buffer
+	 * 0, don't need to set priority again either, but re-enabling the task
+	 * and the channel might be a good idea.
+	 */
+}
+
+static void __idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	unsigned long flags;
+	int i;
+
+	ipu_disable_channel(idmac, ichan,
+			    ichan->status >= IPU_CHANNEL_ENABLED);
+
+	tasklet_disable(&to_ipu(idmac)->tasklet);
+
+	/* ichan->queue is modified in ISR, have to spinlock */
+	spin_lock_irqsave(&ichan->lock, flags);
+	list_splice_init(&ichan->queue, &ichan->free_list);
+
+	if (ichan->desc)
+		for (i = 0; i < ichan->n_tx_desc; i++) {
+			struct idmac_tx_desc *desc = ichan->desc + i;
+			if (list_empty(&desc->list))
+				/* Descriptor was prepared, but not submitted */
+				list_add(&desc->list,
+					 &ichan->free_list);
+
+			async_tx_clear_ack(&desc->txd);
+		}
+
+	ichan->sg[0] = NULL;
+	ichan->sg[1] = NULL;
+	spin_unlock_irqrestore(&ichan->lock, flags);
+
+	tasklet_enable(&to_ipu(idmac)->tasklet);
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+}
+
+static void idmac_terminate_all(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	mutex_unlock(&ichan->chan_mutex);
+}
+
+static int idmac_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+	int ret;
+
+	/* dmaengine.c now guarantees to only offer free channels */
+	BUG_ON(chan->client_count > 1);
+	WARN_ON(ichan->status != IPU_CHANNEL_FREE);
+
+	chan->cookie		= 1;
+	ichan->completed	= -ENXIO;
+
+	ret = ipu_irq_map(ichan->dma_chan.chan_id);
+	if (ret < 0)
+		goto eimap;
+
+	ichan->eof_irq = ret;
+	ret = request_irq(ichan->eof_irq, idmac_interrupt, 0,
+			  ichan->eof_name, ichan);
+	if (ret < 0)
+		goto erirq;
+
+	ret = ipu_init_channel(idmac, ichan);
+	if (ret < 0)
+		goto eichan;
+
+	ichan->status = IPU_CHANNEL_INITIALIZED;
+
+	dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n",
+		ichan->dma_chan.chan_id, ichan->eof_irq);
+
+	return ret;
+
+eichan:
+	free_irq(ichan->eof_irq, ichan);
+erirq:
+	ipu_irq_unmap(ichan->dma_chan.chan_id);
+eimap:
+	return ret;
+}
+
+static void idmac_free_chan_resources(struct dma_chan *chan)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+	struct idmac *idmac = to_idmac(chan->device);
+
+	mutex_lock(&ichan->chan_mutex);
+
+	__idmac_terminate_all(chan);
+
+	if (ichan->status > IPU_CHANNEL_FREE) {
+		free_irq(ichan->eof_irq, ichan);
+		ipu_irq_unmap(ichan->dma_chan.chan_id);
+	}
+
+	ichan->status = IPU_CHANNEL_FREE;
+
+	ipu_uninit_channel(idmac, ichan);
+
+	mutex_unlock(&ichan->chan_mutex);
+
+	tasklet_schedule(&to_ipu(idmac)->tasklet);
+}
+
+static enum dma_status idmac_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct idmac_channel *ichan = to_idmac_chan(chan);
+
+	if (done)
+		*done = ichan->completed;
+	if (used)
+		*used = chan->cookie;
+	if (cookie != chan->cookie)
+		return DMA_ERROR;
+	return DMA_SUCCESS;
+}
+
+static int __init ipu_idmac_init(struct ipu *ipu)
+{
+	struct idmac *idmac = &ipu->idmac;
+	struct dma_device *dma = &idmac->dma;
+	int i;
+
+	dma_cap_set(DMA_SLAVE, dma->cap_mask);
+	dma_cap_set(DMA_PRIVATE, dma->cap_mask);
+
+	/* Compulsory common fields */
+	dma->dev				= ipu->dev;
+	dma->device_alloc_chan_resources	= idmac_alloc_chan_resources;
+	dma->device_free_chan_resources		= idmac_free_chan_resources;
+	dma->device_is_tx_complete		= idmac_is_tx_complete;
+	dma->device_issue_pending		= idmac_issue_pending;
+
+	/* Compulsory for DMA_SLAVE fields */
+	dma->device_prep_slave_sg		= idmac_prep_slave_sg;
+	dma->device_terminate_all		= idmac_terminate_all;
+
+	INIT_LIST_HEAD(&dma->channels);
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+		struct dma_chan *dma_chan = &ichan->dma_chan;
+
+		spin_lock_init(&ichan->lock);
+		mutex_init(&ichan->chan_mutex);
+
+		ichan->status		= IPU_CHANNEL_FREE;
+		ichan->sec_chan_en	= false;
+		ichan->completed	= -ENXIO;
+		snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i);
+
+		dma_chan->device	= &idmac->dma;
+		dma_chan->cookie	= 1;
+		dma_chan->chan_id	= i;
+		list_add_tail(&ichan->dma_chan.device_node, &dma->channels);
+	}
+
+	idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF);
+
+	return dma_async_device_register(&idmac->dma);
+}
+
+static void ipu_idmac_exit(struct ipu *ipu)
+{
+	int i;
+	struct idmac *idmac = &ipu->idmac;
+
+	for (i = 0; i < IPU_CHANNELS_NUM; i++) {
+		struct idmac_channel *ichan = ipu->channel + i;
+
+		idmac_terminate_all(&ichan->dma_chan);
+		idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0);
+	}
+
+	dma_async_device_unregister(&idmac->dma);
+}
+
+/*****************************************************************************
+ * IPU common probe / remove
+ */
+
+static int ipu_probe(struct platform_device *pdev)
+{
+	struct ipu_platform_data *pdata = pdev->dev.platform_data;
+	struct resource *mem_ipu, *mem_ic;
+	int ret;
+
+	spin_lock_init(&ipu_data.lock);
+
+	mem_ipu	= platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mem_ic	= platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!pdata || !mem_ipu || !mem_ic)
+		return -EINVAL;
+
+	ipu_data.dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, &ipu_data);
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_fn = ret;
+	ret = platform_get_irq(pdev, 1);
+	if (ret < 0)
+		goto err_noirq;
+
+	ipu_data.irq_err = ret;
+	ipu_data.irq_base = pdata->irq_base;
+
+	dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n",
+		ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base);
+
+	/* Remap IPU common registers */
+	ipu_data.reg_ipu = ioremap(mem_ipu->start,
+				   mem_ipu->end - mem_ipu->start + 1);
+	if (!ipu_data.reg_ipu) {
+		ret = -ENOMEM;
+		goto err_ioremap_ipu;
+	}
+
+	/* Remap Image Converter and Image DMA Controller registers */
+	ipu_data.reg_ic = ioremap(mem_ic->start,
+				  mem_ic->end - mem_ic->start + 1);
+	if (!ipu_data.reg_ic) {
+		ret = -ENOMEM;
+		goto err_ioremap_ic;
+	}
+
+	/* Get IPU clock */
+	ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk");
+	if (IS_ERR(ipu_data.ipu_clk)) {
+		ret = PTR_ERR(ipu_data.ipu_clk);
+		goto err_clk_get;
+	}
+
+	/* Make sure IPU HSP clock is running */
+	clk_enable(ipu_data.ipu_clk);
+
+	/* Disable all interrupts */
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4);
+	idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5);
+
+	dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name,
+		(unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err);
+
+	ret = ipu_irq_attach_irq(&ipu_data, pdev);
+	if (ret < 0)
+		goto err_attach_irq;
+
+	/* Initialize DMA engine */
+	ret = ipu_idmac_init(&ipu_data);
+	if (ret < 0)
+		goto err_idmac_init;
+
+	tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data);
+
+	ipu_data.dev = &pdev->dev;
+
+	dev_dbg(ipu_data.dev, "IPU initialized\n");
+
+	return 0;
+
+err_idmac_init:
+err_attach_irq:
+	ipu_irq_detach_irq(&ipu_data, pdev);
+	clk_disable(ipu_data.ipu_clk);
+	clk_put(ipu_data.ipu_clk);
+err_clk_get:
+	iounmap(ipu_data.reg_ic);
+err_ioremap_ic:
+	iounmap(ipu_data.reg_ipu);
+err_ioremap_ipu:
+err_noirq:
+	dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret);
+	return ret;
+}
+
+static int ipu_remove(struct platform_device *pdev)
+{
+	struct ipu *ipu = platform_get_drvdata(pdev);
+
+	ipu_idmac_exit(ipu);
+	ipu_irq_detach_irq(ipu, pdev);
+	clk_disable(ipu->ipu_clk);
+	clk_put(ipu->ipu_clk);
+	iounmap(ipu->reg_ic);
+	iounmap(ipu->reg_ipu);
+	tasklet_kill(&ipu->tasklet);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/*
+ * We need two MEM resources - with IPU-common and Image Converter registers,
+ * including PF_CONF and IDMAC_* registers, and two IRQs - function and error
+ */
+static struct platform_driver ipu_platform_driver = {
+	.driver = {
+		.name	= "ipu-core",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= ipu_remove,
+};
+
+static int __init ipu_init(void)
+{
+	return platform_driver_probe(&ipu_platform_driver, ipu_probe);
+}
+subsys_initcall(ipu_init);
+
+MODULE_DESCRIPTION("IPU core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
+MODULE_ALIAS("platform:ipu-core");
diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h
new file mode 100644
index 0000000..545cf11
--- /dev/null
+++ b/drivers/dma/ipu/ipu_intern.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IPU_INTERN_H_
+#define _IPU_INTERN_H_
+
+#include <linux/dmaengine.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+/* IPU Common registers */
+#define IPU_CONF		0x00
+#define IPU_CHA_BUF0_RDY	0x04
+#define IPU_CHA_BUF1_RDY	0x08
+#define IPU_CHA_DB_MODE_SEL	0x0C
+#define IPU_CHA_CUR_BUF		0x10
+#define IPU_FS_PROC_FLOW	0x14
+#define IPU_FS_DISP_FLOW	0x18
+#define IPU_TASKS_STAT		0x1C
+#define IPU_IMA_ADDR		0x20
+#define IPU_IMA_DATA		0x24
+#define IPU_INT_CTRL_1		0x28
+#define IPU_INT_CTRL_2		0x2C
+#define IPU_INT_CTRL_3		0x30
+#define IPU_INT_CTRL_4		0x34
+#define IPU_INT_CTRL_5		0x38
+#define IPU_INT_STAT_1		0x3C
+#define IPU_INT_STAT_2		0x40
+#define IPU_INT_STAT_3		0x44
+#define IPU_INT_STAT_4		0x48
+#define IPU_INT_STAT_5		0x4C
+#define IPU_BRK_CTRL_1		0x50
+#define IPU_BRK_CTRL_2		0x54
+#define IPU_BRK_STAT		0x58
+#define IPU_DIAGB_CTRL		0x5C
+
+/* IPU_CONF Register bits */
+#define IPU_CONF_CSI_EN		0x00000001
+#define IPU_CONF_IC_EN		0x00000002
+#define IPU_CONF_ROT_EN		0x00000004
+#define IPU_CONF_PF_EN		0x00000008
+#define IPU_CONF_SDC_EN		0x00000010
+#define IPU_CONF_ADC_EN		0x00000020
+#define IPU_CONF_DI_EN		0x00000040
+#define IPU_CONF_DU_EN		0x00000080
+#define IPU_CONF_PXL_ENDIAN	0x00000100
+
+/* Image Converter Registers */
+#define IC_CONF			0x88
+#define IC_PRP_ENC_RSC		0x8C
+#define IC_PRP_VF_RSC		0x90
+#define IC_PP_RSC		0x94
+#define IC_CMBP_1		0x98
+#define IC_CMBP_2		0x9C
+#define PF_CONF			0xA0
+#define IDMAC_CONF		0xA4
+#define IDMAC_CHA_EN		0xA8
+#define IDMAC_CHA_PRI		0xAC
+#define IDMAC_CHA_BUSY		0xB0
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN	0x00000001
+#define IC_CONF_PRPENC_CSC1	0x00000002
+#define IC_CONF_PRPENC_ROT_EN	0x00000004
+#define IC_CONF_PRPVF_EN	0x00000100
+#define IC_CONF_PRPVF_CSC1	0x00000200
+#define IC_CONF_PRPVF_CSC2	0x00000400
+#define IC_CONF_PRPVF_CMB	0x00000800
+#define IC_CONF_PRPVF_ROT_EN	0x00001000
+#define IC_CONF_PP_EN		0x00010000
+#define IC_CONF_PP_CSC1		0x00020000
+#define IC_CONF_PP_CSC2		0x00040000
+#define IC_CONF_PP_CMB		0x00080000
+#define IC_CONF_PP_ROT_EN	0x00100000
+#define IC_CONF_IC_GLB_LOC_A	0x10000000
+#define IC_CONF_KEY_COLOR_EN	0x20000000
+#define IC_CONF_RWS_EN		0x40000000
+#define IC_CONF_CSI_MEM_WR_EN	0x80000000
+
+#define IDMA_CHAN_INVALID	0x000000FF
+#define IDMA_IC_0		0x00000001
+#define IDMA_IC_1		0x00000002
+#define IDMA_IC_2		0x00000004
+#define IDMA_IC_3		0x00000008
+#define IDMA_IC_4		0x00000010
+#define IDMA_IC_5		0x00000020
+#define IDMA_IC_6		0x00000040
+#define IDMA_IC_7		0x00000080
+#define IDMA_IC_8		0x00000100
+#define IDMA_IC_9		0x00000200
+#define IDMA_IC_10		0x00000400
+#define IDMA_IC_11		0x00000800
+#define IDMA_IC_12		0x00001000
+#define IDMA_IC_13		0x00002000
+#define IDMA_SDC_BG		0x00004000
+#define IDMA_SDC_FG		0x00008000
+#define IDMA_SDC_MASK		0x00010000
+#define IDMA_SDC_PARTIAL	0x00020000
+#define IDMA_ADC_SYS1_WR	0x00040000
+#define IDMA_ADC_SYS2_WR	0x00080000
+#define IDMA_ADC_SYS1_CMD	0x00100000
+#define IDMA_ADC_SYS2_CMD	0x00200000
+#define IDMA_ADC_SYS1_RD	0x00400000
+#define IDMA_ADC_SYS2_RD	0x00800000
+#define IDMA_PF_QP		0x01000000
+#define IDMA_PF_BSP		0x02000000
+#define IDMA_PF_Y_IN		0x04000000
+#define IDMA_PF_U_IN		0x08000000
+#define IDMA_PF_V_IN		0x10000000
+#define IDMA_PF_Y_OUT		0x20000000
+#define IDMA_PF_U_OUT		0x40000000
+#define IDMA_PF_V_OUT		0x80000000
+
+#define TSTAT_PF_H264_PAUSE	0x00000001
+#define TSTAT_CSI2MEM_MASK	0x0000000C
+#define TSTAT_CSI2MEM_OFFSET	2
+#define TSTAT_VF_MASK		0x00000600
+#define TSTAT_VF_OFFSET		9
+#define TSTAT_VF_ROT_MASK	0x000C0000
+#define TSTAT_VF_ROT_OFFSET	18
+#define TSTAT_ENC_MASK		0x00000180
+#define TSTAT_ENC_OFFSET	7
+#define TSTAT_ENC_ROT_MASK	0x00030000
+#define TSTAT_ENC_ROT_OFFSET	16
+#define TSTAT_PP_MASK		0x00001800
+#define TSTAT_PP_OFFSET		11
+#define TSTAT_PP_ROT_MASK	0x00300000
+#define TSTAT_PP_ROT_OFFSET	20
+#define TSTAT_PF_MASK		0x00C00000
+#define TSTAT_PF_OFFSET		22
+#define TSTAT_ADCSYS1_MASK	0x03000000
+#define TSTAT_ADCSYS1_OFFSET	24
+#define TSTAT_ADCSYS2_MASK	0x0C000000
+#define TSTAT_ADCSYS2_OFFSET	26
+
+#define TASK_STAT_IDLE		0
+#define TASK_STAT_ACTIVE	1
+#define TASK_STAT_WAIT4READY	2
+
+struct idmac {
+	struct dma_device	dma;
+};
+
+struct ipu {
+	void __iomem		*reg_ipu;
+	void __iomem		*reg_ic;
+	unsigned int		irq_fn;		/* IPU Function IRQ to the CPU */
+	unsigned int		irq_err;	/* IPU Error IRQ to the CPU */
+	unsigned int		irq_base;	/* Beginning of the IPU IRQ range */
+	unsigned long		channel_init_mask;
+	spinlock_t		lock;
+	struct clk		*ipu_clk;
+	struct device		*dev;
+	struct idmac		idmac;
+	struct idmac_channel	channel[IPU_CHANNELS_NUM];
+	struct tasklet_struct	tasklet;
+};
+
+#define to_idmac(d) container_of(d, struct idmac, dma)
+
+extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev);
+extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev);
+
+extern bool ipu_irq_status(uint32_t irq);
+extern int ipu_irq_map(unsigned int source);
+extern int ipu_irq_unmap(unsigned int source);
+
+#endif
diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c
new file mode 100644
index 0000000..83f532c
--- /dev/null
+++ b/drivers/dma/ipu/ipu_irq.c
@@ -0,0 +1,413 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/ipu.h>
+
+#include "ipu_intern.h"
+
+/*
+ * Register read / write - shall be inlined by the compiler
+ */
+static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg)
+{
+	return __raw_readl(ipu->reg_ipu + reg);
+}
+
+static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg)
+{
+	__raw_writel(value, ipu->reg_ipu + reg);
+}
+
+
+/*
+ * IPU IRQ chip driver
+ */
+
+#define IPU_IRQ_NR_FN_BANKS 3
+#define IPU_IRQ_NR_ERR_BANKS 2
+#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS)
+
+struct ipu_irq_bank {
+	unsigned int	control;
+	unsigned int	status;
+	spinlock_t	lock;
+	struct ipu	*ipu;
+};
+
+static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = {
+	/* 3 groups of functional interrupts */
+	{
+		.control	= IPU_INT_CTRL_1,
+		.status		= IPU_INT_STAT_1,
+	}, {
+		.control	= IPU_INT_CTRL_2,
+		.status		= IPU_INT_STAT_2,
+	}, {
+		.control	= IPU_INT_CTRL_3,
+		.status		= IPU_INT_STAT_3,
+	},
+	/* 2 groups of error interrupts */
+	{
+		.control	= IPU_INT_CTRL_4,
+		.status		= IPU_INT_STAT_4,
+	}, {
+		.control	= IPU_INT_CTRL_5,
+		.status		= IPU_INT_STAT_5,
+	},
+};
+
+struct ipu_irq_map {
+	unsigned int		irq;
+	int			source;
+	struct ipu_irq_bank	*bank;
+	struct ipu		*ipu;
+};
+
+static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS];
+/* Protects allocations from the above array of maps */
+static DEFINE_MUTEX(map_lock);
+/* Protects register accesses and individual mappings */
+static DEFINE_SPINLOCK(bank_lock);
+
+static struct ipu_irq_map *src2map(unsigned int src)
+{
+	int i;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++)
+		if (irq_map[i].source == src)
+			return irq_map + i;
+
+	return NULL;
+}
+
+static void ipu_irq_unmask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg |= (1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_mask(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	uint32_t reg;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	reg = ipu_read_reg(bank->ipu, bank->control);
+	reg &= ~(1UL << (map->source & 31));
+	ipu_write_reg(bank->ipu, reg, bank->control);
+
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+static void ipu_irq_ack(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+
+	bank = map->bank;
+	if (!bank) {
+		spin_unlock_irqrestore(&bank_lock, lock_flags);
+		pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq);
+		return;
+	}
+
+	ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status);
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+}
+
+/**
+ * ipu_irq_status() - returns the current interrupt status of the specified IRQ.
+ * @irq:	interrupt line to get status for.
+ * @return:	true if the interrupt is pending/asserted or false if the
+ *		interrupt is not pending.
+ */
+bool ipu_irq_status(unsigned int irq)
+{
+	struct ipu_irq_map *map = get_irq_chip_data(irq);
+	struct ipu_irq_bank *bank;
+	unsigned long lock_flags;
+	bool ret;
+
+	spin_lock_irqsave(&bank_lock, lock_flags);
+	bank = map->bank;
+	ret = bank && ipu_read_reg(bank->ipu, bank->status) &
+		(1UL << (map->source & 31));
+	spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see below)
+ * @return:	mapped IRQ number or negative error code
+ *
+ * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ
+ * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17.
+ * However, the source argument of this function is not the sequence number of
+ * the possible IRQ, but rather its bit position. So, first interrupt in fourth
+ * register has source number 96, and not 88. This makes calculations easier,
+ * and also provides forward compatibility with any future IPU implementations
+ * with any interrupt bit assignments.
+ */
+int ipu_irq_map(unsigned int source)
+{
+	int i, ret = -ENOMEM;
+	struct ipu_irq_map *map;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	map = src2map(source);
+	if (map) {
+		pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq);
+		ret = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source < 0) {
+			unsigned long lock_flags;
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = source;
+			irq_map[i].bank = irq_bank + source / 32;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = irq_map[i].irq;
+			pr_debug("IPU: mapped source %u to IRQ %u\n",
+				 source, ret);
+			break;
+		}
+	}
+out:
+	mutex_unlock(&map_lock);
+
+	if (ret < 0)
+		pr_err("IPU: couldn't map source %u: %d\n", source, ret);
+
+	return ret;
+}
+
+/**
+ * ipu_irq_map() - map an IPU interrupt source to an IRQ number
+ * @source:	interrupt source bit position (see ipu_irq_map())
+ * @return:	0 or negative error code
+ */
+int ipu_irq_unmap(unsigned int source)
+{
+	int i, ret = -EINVAL;
+
+	might_sleep();
+
+	mutex_lock(&map_lock);
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		if (irq_map[i].source == source) {
+			unsigned long lock_flags;
+
+			pr_debug("IPU: unmapped source %u from IRQ %u\n",
+				 source, irq_map[i].irq);
+
+			spin_lock_irqsave(&bank_lock, lock_flags);
+			irq_map[i].source = -EINVAL;
+			irq_map[i].bank = NULL;
+			spin_unlock_irqrestore(&bank_lock, lock_flags);
+
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&map_lock);
+
+	return ret;
+}
+
+/* Chained IRQ handler for IPU error interrupt */
+static void ipu_irq_err(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/*
+		 * Don't think we have to clear all interrupts here, they will
+		 * be acked by ->handle_irq() (handle_level_irq). However, we
+		 * might want to clear unhandled interrupts after the loop...
+		 */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+/* Chained IRQ handler for IPU function interrupt */
+static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc)
+{
+	struct ipu *ipu = get_irq_data(irq);
+	u32 status;
+	int i, line;
+
+	for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) {
+		struct ipu_irq_bank *bank = irq_bank + i;
+
+		spin_lock(&bank_lock);
+		status = ipu_read_reg(ipu, bank->status);
+		/* Not clearing all interrupts, see above */
+		status &= ipu_read_reg(ipu, bank->control);
+		spin_unlock(&bank_lock);
+		while ((line = ffs(status))) {
+			struct ipu_irq_map *map;
+
+			line--;
+			status &= ~(1UL << line);
+
+			spin_lock(&bank_lock);
+			map = src2map(32 * i + line);
+			if (map)
+				irq = map->irq;
+			spin_unlock(&bank_lock);
+
+			if (!map) {
+				pr_err("IPU: Interrupt on unmapped source %u bank %d\n",
+				       line, i);
+				continue;
+			}
+			generic_handle_irq(irq);
+		}
+	}
+}
+
+static struct irq_chip ipu_irq_chip = {
+	.name	= "ipu_irq",
+	.ack	= ipu_irq_ack,
+	.mask	= ipu_irq_mask,
+	.unmask	= ipu_irq_unmask,
+};
+
+/* Install the IRQ handler */
+int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base, i;
+
+	irq_base = pdata->irq_base;
+
+	for (i = 0; i < IPU_IRQ_NR_BANKS; i++)
+		irq_bank[i].ipu = ipu;
+
+	for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) {
+		int ret;
+
+		irq = irq_base + i;
+		ret = set_irq_chip(irq, &ipu_irq_chip);
+		if (ret < 0)
+			return ret;
+		ret = set_irq_chip_data(irq, irq_map + i);
+		if (ret < 0)
+			return ret;
+		irq_map[i].ipu = ipu;
+		irq_map[i].irq = irq;
+		irq_map[i].source = -EINVAL;
+		set_irq_handler(irq, handle_level_irq);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+#endif
+	}
+
+	set_irq_data(ipu->irq_fn, ipu);
+	set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn);
+
+	set_irq_data(ipu->irq_err, ipu);
+	set_irq_chained_handler(ipu->irq_err, ipu_irq_err);
+
+	return 0;
+}
+
+void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev)
+{
+	struct ipu_platform_data *pdata = dev->dev.platform_data;
+	unsigned int irq, irq_base;
+
+	irq_base = pdata->irq_base;
+
+	set_irq_chained_handler(ipu->irq_fn, NULL);
+	set_irq_data(ipu->irq_fn, NULL);
+
+	set_irq_chained_handler(ipu->irq_err, NULL);
+	set_irq_data(ipu->irq_err, NULL);
+
+	for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip(irq, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index d76adfe..8f0f7c4 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -415,6 +415,29 @@
 }
 
 /**
+ *	dmi_matches - check if dmi_system_id structure matches system DMI data
+ *	@dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_matches(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
+
+	for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
+		int s = dmi->matches[i].slot;
+		if (s == DMI_NONE)
+			continue;
+		if (dmi_ident[s]
+		    && strstr(dmi_ident[s], dmi->matches[i].substr))
+			continue;
+		/* No match */
+		return false;
+	}
+	return true;
+}
+
+/**
  *	dmi_check_system - check system DMI data
  *	@list: array of dmi_system_id structures to match against
  *		All non-null elements of the list must match
@@ -429,32 +452,45 @@
  */
 int dmi_check_system(const struct dmi_system_id *list)
 {
-	int i, count = 0;
-	const struct dmi_system_id *d = list;
+	int count = 0;
+	const struct dmi_system_id *d;
 
-	WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n");
-
-	while (d->ident) {
-		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
-			int s = d->matches[i].slot;
-			if (s == DMI_NONE)
-				continue;
-			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
-				continue;
-			/* No match */
-			goto fail;
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d)) {
+			count++;
+			if (d->callback && d->callback(d))
+				break;
 		}
-		count++;
-		if (d->callback && d->callback(d))
-			break;
-fail:		d++;
-	}
 
 	return count;
 }
 EXPORT_SYMBOL(dmi_check_system);
 
 /**
+ *	dmi_first_match - find dmi_system_id structure matching system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *		All non-null elements of the list must match
+ *		their slot's (field index's) data (i.e., each
+ *		list string must be a substring of the specified
+ *		DMI slot's string data) to be considered a
+ *		successful match.
+ *
+ *	Walk the blacklist table until the first match is found.  Return the
+ *	pointer to the matching entry or NULL if there's no match.
+ */
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list)
+{
+	const struct dmi_system_id *d;
+
+	for (d = list; d->ident; d++)
+		if (dmi_matches(d))
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_first_match);
+
+/**
  *	dmi_get_system_info - return DMI data value
  *	@field: data index (see enum dmi_field)
  *
diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c
index 3d33b82..1479659 100644
--- a/drivers/gpu/drm/drm_agpsupport.c
+++ b/drivers/gpu/drm/drm_agpsupport.c
@@ -33,10 +33,11 @@
 
 #include "drmP.h"
 #include <linux/module.h>
-#include <asm/agp.h>
 
 #if __OS_HAS_AGP
 
+#include <asm/agp.h>
+
 /**
  * Get AGP information.
  *
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5b2cbb7..bfce099 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -194,7 +194,6 @@
  * @type: object type
  *
  * LOCKING:
- * Caller must hold DRM mode_config lock.
  *
  * Create a unique identifier based on @ptr in @dev's identifier space.  Used
  * for tracking modes, CRTCs and connectors.
@@ -209,15 +208,15 @@
 	int new_id = 0;
 	int ret;
 
-	WARN(!mutex_is_locked(&dev->mode_config.mutex),
-	     "%s called w/o mode_config lock\n", __func__);
 again:
 	if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) {
 		DRM_ERROR("Ran out memory getting a mode number\n");
 		return -EINVAL;
 	}
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 	if (ret == -EAGAIN)
 		goto again;
 
@@ -239,16 +238,20 @@
 static void drm_mode_object_put(struct drm_device *dev,
 				struct drm_mode_object *object)
 {
+	mutex_lock(&dev->mode_config.idr_mutex);
 	idr_remove(&dev->mode_config.crtc_idr, object->id);
+	mutex_unlock(&dev->mode_config.idr_mutex);
 }
 
 void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type)
 {
-	struct drm_mode_object *obj;
+	struct drm_mode_object *obj = NULL;
 
+	mutex_lock(&dev->mode_config.idr_mutex);
 	obj = idr_find(&dev->mode_config.crtc_idr, id);
 	if (!obj || (obj->type != type) || (obj->id != id))
-		return NULL;
+		obj = NULL;
+	mutex_unlock(&dev->mode_config.idr_mutex);
 
 	return obj;
 }
@@ -786,6 +789,7 @@
 void drm_mode_config_init(struct drm_device *dev)
 {
 	mutex_init(&dev->mode_config.mutex);
+	mutex_init(&dev->mode_config.idr_mutex);
 	INIT_LIST_HEAD(&dev->mode_config.fb_list);
 	INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list);
 	INIT_LIST_HEAD(&dev->mode_config.crtc_list);
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 5ff88d9..14c7a23 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -294,6 +294,7 @@
  */
 static void drm_cleanup(struct drm_device * dev)
 {
+	struct drm_map_list *r_list, *list_temp;
 	DRM_DEBUG("\n");
 
 	if (!dev) {
@@ -325,6 +326,9 @@
 	drm_ht_remove(&dev->map_hash);
 	drm_ctxbitmap_cleanup(dev);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
+		drm_rmmap(dev, r_list->map);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_put_minor(&dev->control);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 0fbb0da..5a4d324 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -660,7 +660,7 @@
 
 	edid = (struct edid *)drm_ddc_read(adapter);
 	if (!edid) {
-		dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n",
+		dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
 			 drm_get_connector_name(connector));
 		return NULL;
 	}
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 5ca132a..46bb923 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -118,12 +118,20 @@
 	struct drm_master *master = container_of(kref, struct drm_master, refcount);
 	struct drm_magic_entry *pt, *next;
 	struct drm_device *dev = master->minor->dev;
+	struct drm_map_list *r_list, *list_temp;
 
 	list_del(&master->head);
 
 	if (dev->driver->master_destroy)
 		dev->driver->master_destroy(dev, master);
 
+	list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
+		if (r_list->master == master) {
+			drm_rmmap_locked(dev, r_list->map);
+			r_list = NULL;
+		}
+	}
+
 	if (master->unique) {
 		drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER);
 		master->unique = NULL;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index bbadf1c..ee64b73 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -944,13 +944,14 @@
 	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
 		0xff000000;
 
-	DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
-
-	if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+	if (IS_MOBILE(dev) || IS_I9XX(dev))
 		dev_priv->cursor_needs_physical = true;
 	else
 		dev_priv->cursor_needs_physical = false;
 
+	if (IS_I965G(dev) || IS_G33(dev))
+		dev_priv->cursor_needs_physical = false;
+
 	ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
 	if (ret)
 		goto kfree_devname;
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 96316fd..debad5c 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3364,7 +3364,7 @@
 {
 	int i;
 
-	for (i = 0; i < I915_MAX_PHYS_OBJECT; i++)
+	for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++)
 		i915_gem_free_phys_object(dev, i);
 }
 
@@ -3427,7 +3427,7 @@
 		ret = i915_gem_init_phys_object(dev, id,
 						obj->size);
 		if (ret) {
-			DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size);
+			DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size);
 			goto out;
 		}
 	}
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index a5a2f53..5ee9d4c 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -137,10 +137,6 @@
 	chan->reg = reg;
 	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
 	chan->adapter.owner = THIS_MODULE;
-#ifndef I2C_HW_B_INTELFB
-#define I2C_HW_B_INTELFB I2C_HW_B_I810
-#endif
-	chan->adapter.id = I2C_HW_B_INTELFB;
 	chan->adapter.algo_data	= &chan->algo;
 	chan->adapter.dev.parent = &dev->pdev->dev;
 	chan->algo.setsda = set_data;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 2fafdcc..6b1148f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -340,6 +340,18 @@
 	kfree(connector);
 }
 
+static int intel_lvds_set_property(struct drm_connector *connector,
+				   struct drm_property *property,
+				   uint64_t value)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.dpms_property && connector->encoder)
+		intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+	return 0;
+}
+
 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
 	.dpms = intel_lvds_dpms,
 	.mode_fixup = intel_lvds_mode_fixup,
@@ -359,6 +371,7 @@
 	.restore = intel_lvds_restore,
 	.detect = intel_lvds_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = intel_lvds_set_property,
 	.destroy = intel_lvds_destroy,
 };
 
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 75089fe..9fee3ca 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,7 +83,6 @@
 };
 
 static struct i2c_adapter ioc_ops = {
-	.id			= I2C_HW_B_IOC,
 	.algo_data		= &ioc_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 9cead9b..981e080 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -476,7 +476,6 @@
 
 static struct i2c_adapter ali1535_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI1535,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index dd9e796..f70f465 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -386,7 +386,6 @@
 
 static struct i2c_adapter ali1563_adapter = {
 	.owner	= THIS_MODULE,
-	.id	= I2C_HW_SMBUS_ALI1563,
 	.class	= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo	= &ali1563_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 234fdde..39066de 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -473,7 +473,6 @@
 
 static struct i2c_adapter ali15x3_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_ALI15X3,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 36bee5b..220f4a1 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -298,7 +298,6 @@
 
 struct i2c_adapter amd756_smbus = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_AMD756,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 3972208..edab519 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -387,7 +387,6 @@
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		"SMBus2 AMD8111 adapter at %04x", smbus->base);
-	smbus->adapter.id = I2C_HW_SMBUS_AMD8111;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 66a04c2..f78ce52 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -400,7 +400,6 @@
 	priv->xfer_timeout = 200;
 	priv->ack_timeout = 200;
 
-	priv->adap.id = I2C_HW_AU1550_PSC;
 	priv->adap.nr = pdev->id;
 	priv->adap.algo = &au1550_algo;
 	priv->adap.algo_data = priv;
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 3fd2c41..fc548b3 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -651,7 +651,6 @@
 	iface->timeout_timer.data = (unsigned long)iface;
 
 	p_adap = &iface->adap;
-	p_adap->id = I2C_HW_BLACKFIN;
 	p_adap->nr = pdev->id;
 	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
 	p_adap->algo = &bfin_twi_algorithm;
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 0ed3ccb..448b4bf 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -202,7 +202,6 @@
 static struct i2c_adapter pcf_isa_ops = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		= I2C_HW_P_ELEK,
 	.algo_data	= &pcf_isa_data,
 	.name		= "i2c-elektor",
 };
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 648aa7b..bec9b84 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -102,7 +102,6 @@
 static struct i2c_adapter hydra_adap = {
 	.owner		= THIS_MODULE,
 	.name		= "Hydra i2c",
-	.id		= I2C_HW_B_HYDRA,
 	.algo_data	= &hydra_bit_data,
 };
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 526625e..230238d 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -556,7 +556,6 @@
 
 static struct i2c_adapter i801_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_I801,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 651f2f1..88f0db7 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -746,7 +746,6 @@
 	adap->dev.parent = &ofdev->dev;
 	strlcpy(adap->name, "IBM IIC", sizeof(adap->name));
 	i2c_set_adapdata(adap, dev);
-	adap->id = I2C_HW_OCP;
 	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo = &iic_algo;
 	adap->timeout = 1;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index fc2714a..3190690 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -480,7 +480,6 @@
 	}
 
 	memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
-	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
 	new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	new_adapter->dev.parent = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 05d72e9..8e84679 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -116,7 +116,6 @@
 	drv_data->algo_data.udelay = 6;
 	drv_data->algo_data.timeout = 100;
 
-	drv_data->adapter.id = I2C_HW_B_IXP2000,
 	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		sizeof(drv_data->adapter.name));
 	drv_data->adapter.algo_data = &drv_data->algo_data,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index a9a45fc..aedbbe6 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -310,7 +310,6 @@
 static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
 	.name = "MPC adapter",
-	.id = I2C_HW_MPC107,
 	.algo = &mpc_algo,
 	.timeout = 1,
 };
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 9e8118d..eeda276f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,7 +527,6 @@
 		goto exit_unmap_regs;
 	}
 	drv_data->adapter.dev.parent = &pd->dev;
-	drv_data->adapter.id = I2C_HW_MV64XXX;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3b19bc4..05af6cd 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -355,7 +355,6 @@
 		return -EBUSY;
 	}
 	smbus->adapter.owner = THIS_MODULE;
-	smbus->adapter.id = I2C_HW_SMBUS_NFORCE2;
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index b2b8380..322c569 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -115,7 +115,6 @@
 static struct i2c_adapter parport_adapter = {
 	.owner		= THIS_MODULE,
 	.class		= I2C_CLASS_HWMON,
-	.id		= I2C_HW_B_LP,
 	.algo_data	= &parport_algo_data,
 	.name		= "Parallel port adapter (light)",
 };
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a257cd5..0d89986 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -164,7 +164,6 @@
 	/* Fill the rest of the structure */
 	adapter->adapter.owner = THIS_MODULE;
 	adapter->adapter.class = I2C_CLASS_HWMON;
-	adapter->adapter.id = I2C_HW_B_LP;
 	strlcpy(adapter->adapter.name, "Parallel port adapter",
 		sizeof(adapter->adapter.name));
 	adapter->algo_data = parport_algo_data;
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 9eb7626..4aa8138 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -101,7 +101,6 @@
 
 static struct i2c_adapter pca_isa_ops = {
 	.owner          = THIS_MODULE,
-	.id		= I2C_HW_A_ISA,
 	.algo_data	= &pca_isa_data,
 	.name		= "PCA9564 ISA Adapter",
 	.timeout	= 100,
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index eaa9b38..761f9dd 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -403,7 +403,6 @@
 
 static struct i2c_adapter piix4_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_PIIX4,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 4ddefbf..98b1ec4 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -155,7 +155,6 @@
 static struct i2c_adapter sibyte_board_adapter[2] = {
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[0],
@@ -164,7 +163,6 @@
 	},
 	{
 		.owner		= THIS_MODULE,
-		.id		= I2C_HW_SIBYTE,
 		.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 		.algo		= NULL,
 		.algo_data	= &sibyte_board_data[1],
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 8ce2daf..f320ab2 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -365,7 +365,6 @@
 
 static struct i2c_adapter sis5595_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS5595,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 9c9c016..50c3610 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -464,7 +464,6 @@
 
 static struct i2c_adapter sis630_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS630,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index f1bba63..7e1594b 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -241,7 +241,6 @@
 
 static struct i2c_adapter sis96x_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_SIS96X,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index 29cef04..8b24f19 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -83,7 +83,6 @@
 
 static struct i2c_adapter vt586b_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VIA,
 	.class          = I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.name		= "VIA i2c",
 	.algo_data	= &bit_data,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 9f194d9..02e6f72 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -321,7 +321,6 @@
 
 static struct i2c_adapter vt596_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_SMBUS_VIA2,
 	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
 	.algo		= &smbus_algorithm,
 };
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
index 1d4ae26..1a474ac 100644
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ b/drivers/i2c/busses/i2c-voodoo3.c
@@ -163,7 +163,6 @@
 
 static struct i2c_adapter voodoo3_i2c_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_TV_ANALOG, 
 	.name		= "I2C Voodoo3/Banshee adapter",
 	.algo_data	= &voo_i2c_bit_data,
@@ -180,7 +179,6 @@
 
 static struct i2c_adapter voodoo3_ddc_adapter = {
 	.owner		= THIS_MODULE,
-	.id		= I2C_HW_B_VOO,
 	.class		= I2C_CLASS_DDC, 
 	.name		= "DDC Voodoo3/Banshee adapter",
 	.algo_data	= &voo_ddc_bit_data,
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ed794b1..648ecc6 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -440,7 +440,6 @@
 	i2c_set_adapdata(adapter, iface);
 	snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index);
 	adapter->owner = THIS_MODULE;
-	adapter->id = I2C_HW_SMBUS_SCX200;
 	adapter->algo = &scx200_acb_algorithm;
 	adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adapter->dev.parent = dev;
diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c
index e4c9853..162b74a 100644
--- a/drivers/i2c/busses/scx200_i2c.c
+++ b/drivers/i2c/busses/scx200_i2c.c
@@ -82,7 +82,6 @@
 static struct i2c_adapter scx200_i2c_ops = {
 	.owner		   = THIS_MODULE,
 	.class             = I2C_CLASS_HWMON | I2C_CLASS_SPD,
-	.id		   = I2C_HW_B_SCX200,
 	.algo_data	   = &scx200_i2c_data,
 	.name	= "NatSemi SCx200 I2C",
 };
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04..c80312c 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,43 +16,6 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1682.
 
-config AT24
-	tristate "EEPROMs from most vendors"
-	depends on SYSFS && EXPERIMENTAL
-	help
-	  Enable this driver to get read/write support to most I2C EEPROMs,
-	  after you configure the driver to know about each EEPROM on
-	  your target board.  Use these generic chip names, instead of
-	  vendor-specific ones like at24c64 or 24lc02:
-
-	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
-	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
-	  Unless you like data loss puzzles, always be sure that any chip
-	  you configure as a 24c32 (32 kbit) or larger is NOT really a
-	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
-	  as read-only won't help recover from this. Also, if your chip
-	  has any software write-protect mechanism you may want to review the
-	  code to make sure this driver won't turn it on by accident.
-
-	  If you use this with an SMBus adapter instead of an I2C adapter,
-	  full functionality is not available.  Only smaller devices are
-	  supported (24c16 and below, max 4 kByte).
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at24.
-
-config SENSORS_EEPROM
-	tristate "EEPROM reader"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get read-only access to the EEPROM data
-	  available on modern memory DIMMs and Sony Vaio laptops.  Such
-	  EEPROMs could theoretically be available on other devices as well.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called eeprom.
-
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb51..d142f23 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,8 +11,6 @@
 #
 
 obj-$(CONFIG_DS1682)		+= ds1682.o
-obj-$(CONFIG_AT24)		+= at24.o
-obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c
index a5ba820..a638e95 100644
--- a/drivers/ide/falconide.c
+++ b/drivers/ide/falconide.c
@@ -82,7 +82,7 @@
 
 static const struct ide_port_info falconide_port_info = {
 	.tp_ops			= &falconide_tp_ops,
-	.host_flags		= IDE_HFLAG_NO_DMA,
+	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE,
 };
 
 static void __init falconide_setup_ports(hw_regs_t *hw)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 312127e..0db1ed9 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -649,7 +649,8 @@
 	/* register with global device tree */
 	dev_set_name(&hwif->gendev, hwif->name);
 	hwif->gendev.driver_data = hwif;
-	hwif->gendev.parent = hwif->dev;
+	if (hwif->gendev.parent == NULL)
+		hwif->gendev.parent = hwif->dev;
 	hwif->gendev.release = hwif_release_dev;
 
 	ret = device_register(&hwif->gendev);
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c
index a7ac490..f38aac7 100644
--- a/drivers/ide/palm_bk3710.c
+++ b/drivers/ide/palm_bk3710.c
@@ -346,7 +346,8 @@
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	unsigned long base, rate;
+	void __iomem *base;
+	unsigned long rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
@@ -382,11 +383,13 @@
 	base = IO_ADDRESS(mem->start);
 
 	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit((void __iomem *)base);
+	palm_bk3710_chipinit(base);
 
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
-	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
+		hw.io_ports_array[i] = (unsigned long)
+				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
+	hw.io_ports.ctl_addr = (unsigned long)
+			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);
 	hw.irq = irq->start;
 	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index dc15cad..38f7120 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1419,7 +1419,6 @@
 		i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL);
         	if (!i2c_ad) FAIL("failed to allocate I2C adapter memory");
 
-		i2c_ad->id = I2C_HW_B_PCILYNX;
 		strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name));
                 i2c_adapter_data = bit_data;
                 i2c_ad->algo_data = &i2c_adapter_data;
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index a3551dd..aa30b5c 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -431,6 +431,7 @@
 	return 0;
 }
 
+#ifdef CONFIG_IPPP_FILTER
 static int get_filter(void __user *arg, struct sock_filter **p)
 {
 	struct sock_fprog uprog;
@@ -465,6 +466,7 @@
 	*p = code;
 	return uprog.len;
 }
+#endif /* CONFIG_IPPP_FILTER */
 
 /*
  * ippp device ioctl
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 419c378..5607319 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -87,14 +87,6 @@
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
-config EEPROM_93CX6
-	tristate "EEPROM 93CX6 support"
-	---help---
-	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
-	  The driver supports both read as well as write commands.
-
-	  If unsure, say N.
-
 config SGI_IOC4
 	tristate "SGI IOC4 Base IO support"
 	depends on PCI
@@ -231,5 +223,6 @@
 	laptops.
 
 source "drivers/misc/c2port/Kconfig"
+source "drivers/misc/eeprom/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index d5749a7..bc11998 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -13,10 +13,10 @@
 obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
 obj-$(CONFIG_PHANTOM)		+= phantom.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
-obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
 obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_C2PORT)		+= c2port/
+obj-y				+= eeprom/
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
new file mode 100644
index 0000000..c76df8c
--- /dev/null
+++ b/drivers/misc/eeprom/Kconfig
@@ -0,0 +1,59 @@
+menu "EEPROM support"
+
+config EEPROM_AT24
+	tristate "I2C EEPROMs from most vendors"
+	depends on I2C && SYSFS && EXPERIMENTAL
+	help
+	  Enable this driver to get read/write support to most I2C EEPROMs,
+	  after you configure the driver to know about each EEPROM on
+	  your target board.  Use these generic chip names, instead of
+	  vendor-specific ones like at24c64 or 24lc02:
+
+	     24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
+	     24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
+
+	  Unless you like data loss puzzles, always be sure that any chip
+	  you configure as a 24c32 (32 kbit) or larger is NOT really a
+	  24c16 (16 kbit) or smaller, and vice versa. Marking the chip
+	  as read-only won't help recover from this. Also, if your chip
+	  has any software write-protect mechanism you may want to review the
+	  code to make sure this driver won't turn it on by accident.
+
+	  If you use this with an SMBus adapter instead of an I2C adapter,
+	  full functionality is not available.  Only smaller devices are
+	  supported (24c16 and below, max 4 kByte).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at24.
+
+config EEPROM_AT25
+	tristate "SPI EEPROMs from most vendors"
+	depends on SPI && SYSFS
+	help
+	  Enable this driver to get read/write support to most SPI EEPROMs,
+	  after you configure the board init code to know about each eeprom
+	  on your target board.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called at25.
+
+config EEPROM_LEGACY
+	tristate "Old I2C EEPROM reader"
+	depends on I2C && SYSFS
+	help
+	  If you say yes here you get read-only access to the EEPROM data
+	  available on modern memory DIMMs and Sony Vaio laptops via I2C. Such
+	  EEPROMs could theoretically be available on other devices as well.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called eeprom.
+
+config EEPROM_93CX6
+	tristate "EEPROM 93CX6 support"
+	help
+	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
+	  The driver supports both read as well as write commands.
+
+	  If unsure, say N.
+
+endmenu
diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile
new file mode 100644
index 0000000..539dd8f
--- /dev/null
+++ b/drivers/misc/eeprom/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_EEPROM_AT24)	+= at24.o
+obj-$(CONFIG_EEPROM_AT25)	+= at25.o
+obj-$(CONFIG_EEPROM_LEGACY)	+= eeprom.o
+obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c
similarity index 100%
rename from drivers/i2c/chips/at24.c
rename to drivers/misc/eeprom/at24.c
diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c
similarity index 100%
rename from drivers/spi/at25.c
rename to drivers/misc/eeprom/at25.c
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c
similarity index 100%
rename from drivers/i2c/chips/eeprom.c
rename to drivers/misc/eeprom/eeprom.c
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
similarity index 100%
rename from drivers/misc/eeprom_93cx6.c
rename to drivers/misc/eeprom/eeprom_93cx6.c
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index dfa585f..0efa390 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -76,6 +76,16 @@
 
 	  If unsure, say N.
 
+config MMC_OMAP_HS
+	tristate "TI OMAP High Speed Multimedia Card Interface support"
+	depends on ARCH_OMAP2430 || ARCH_OMAP3
+	help
+	  This selects the TI OMAP High Speed Multimedia card Interface.
+	  If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_WBSD
 	tristate "Winbond W83L51xD SD/MMC Card Interface support"
 	depends on ISA_DMA_API
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index f485328..98cab84 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
+obj-$(CONFIG_MMC_OMAP_HS)	+= omap_hsmmc.o
 obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_ATMELMCI)	+= atmel-mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
new file mode 100644
index 0000000..db37490
--- /dev/null
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -0,0 +1,1242 @@
+/*
+ * drivers/mmc/host/omap_hsmmc.c
+ *
+ * Driver for OMAP2430/3430 MMC controller.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ *
+ * Authors:
+ *	Syed Mohammed Khasim	<x0khasim@ti.com>
+ *	Madhusudhan		<madhu.cr@ti.com>
+ *	Mohit Jalori		<mjalori@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/io.h>
+#include <linux/semaphore.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/mmc.h>
+#include <mach/cpu.h>
+
+/* OMAP HSMMC Host Controller Registers */
+#define OMAP_HSMMC_SYSCONFIG	0x0010
+#define OMAP_HSMMC_CON		0x002C
+#define OMAP_HSMMC_BLK		0x0104
+#define OMAP_HSMMC_ARG		0x0108
+#define OMAP_HSMMC_CMD		0x010C
+#define OMAP_HSMMC_RSP10	0x0110
+#define OMAP_HSMMC_RSP32	0x0114
+#define OMAP_HSMMC_RSP54	0x0118
+#define OMAP_HSMMC_RSP76	0x011C
+#define OMAP_HSMMC_DATA		0x0120
+#define OMAP_HSMMC_HCTL		0x0128
+#define OMAP_HSMMC_SYSCTL	0x012C
+#define OMAP_HSMMC_STAT		0x0130
+#define OMAP_HSMMC_IE		0x0134
+#define OMAP_HSMMC_ISE		0x0138
+#define OMAP_HSMMC_CAPA		0x0140
+
+#define VS18			(1 << 26)
+#define VS30			(1 << 25)
+#define SDVS18			(0x5 << 9)
+#define SDVS30			(0x6 << 9)
+#define SDVSCLR			0xFFFFF1FF
+#define SDVSDET			0x00000400
+#define AUTOIDLE		0x1
+#define SDBP			(1 << 8)
+#define DTO			0xe
+#define ICE			0x1
+#define ICS			0x2
+#define CEN			(1 << 2)
+#define CLKD_MASK		0x0000FFC0
+#define CLKD_SHIFT		6
+#define DTO_MASK		0x000F0000
+#define DTO_SHIFT		16
+#define INT_EN_MASK		0x307F0033
+#define INIT_STREAM		(1 << 1)
+#define DP_SELECT		(1 << 21)
+#define DDIR			(1 << 4)
+#define DMA_EN			0x1
+#define MSBS			(1 << 5)
+#define BCE			(1 << 1)
+#define FOUR_BIT		(1 << 1)
+#define CC			0x1
+#define TC			0x02
+#define OD			0x1
+#define ERR			(1 << 15)
+#define CMD_TIMEOUT		(1 << 16)
+#define DATA_TIMEOUT		(1 << 20)
+#define CMD_CRC			(1 << 17)
+#define DATA_CRC		(1 << 21)
+#define CARD_ERR		(1 << 28)
+#define STAT_CLEAR		0xFFFFFFFF
+#define INIT_STREAM_CMD		0x00000000
+#define DUAL_VOLT_OCR_BIT	7
+#define SRC			(1 << 25)
+#define SRD			(1 << 26)
+
+/*
+ * FIXME: Most likely all the data using these _DEVID defines should come
+ * from the platform_data, or implemented in controller and slot specific
+ * functions.
+ */
+#define OMAP_MMC1_DEVID		0
+#define OMAP_MMC2_DEVID		1
+
+#define OMAP_MMC_DATADIR_NONE	0
+#define OMAP_MMC_DATADIR_READ	1
+#define OMAP_MMC_DATADIR_WRITE	2
+#define MMC_TIMEOUT_MS		20
+#define OMAP_MMC_MASTER_CLOCK	96000000
+#define DRIVER_NAME		"mmci-omap-hs"
+
+/*
+ * One controller can have multiple slots, like on some omap boards using
+ * omap.c controller driver. Luckily this is not currently done on any known
+ * omap_hsmmc.c device.
+ */
+#define mmc_slot(host)		(host->pdata->slots[host->slot_id])
+
+/*
+ * MMC Host controller read/write API's
+ */
+#define OMAP_HSMMC_READ(base, reg)	\
+	__raw_readl((base) + OMAP_HSMMC_##reg)
+
+#define OMAP_HSMMC_WRITE(base, reg, val) \
+	__raw_writel((val), (base) + OMAP_HSMMC_##reg)
+
+struct mmc_omap_host {
+	struct	device		*dev;
+	struct	mmc_host	*mmc;
+	struct	mmc_request	*mrq;
+	struct	mmc_command	*cmd;
+	struct	mmc_data	*data;
+	struct	clk		*fclk;
+	struct	clk		*iclk;
+	struct	clk		*dbclk;
+	struct	semaphore	sem;
+	struct	work_struct	mmc_carddetect_work;
+	void	__iomem		*base;
+	resource_size_t		mapbase;
+	unsigned int		id;
+	unsigned int		dma_len;
+	unsigned int		dma_dir;
+	unsigned char		bus_mode;
+	unsigned char		datadir;
+	u32			*buffer;
+	u32			bytesleft;
+	int			suspended;
+	int			irq;
+	int			carddetect;
+	int			use_dma, dma_ch;
+	int			initstr;
+	int			slot_id;
+	int			dbclk_enabled;
+	struct	omap_mmc_platform_data	*pdata;
+};
+
+/*
+ * Stop clock to the card
+ */
+static void omap_mmc_stop_clock(struct mmc_omap_host *host)
+{
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN);
+	if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0)
+		dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
+}
+
+/*
+ * Send init stream sequence to card
+ * before sending IDLE command
+ */
+static void send_init_stream(struct mmc_omap_host *host)
+{
+	int reg = 0;
+	unsigned long timeout;
+
+	disable_irq(host->irq);
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM);
+	OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD);
+
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((reg != CC) && time_before(jiffies, timeout))
+		reg = OMAP_HSMMC_READ(host->base, STAT) & CC;
+
+	OMAP_HSMMC_WRITE(host->base, CON,
+		OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM);
+	enable_irq(host->irq);
+}
+
+static inline
+int mmc_omap_cover_is_closed(struct mmc_omap_host *host)
+{
+	int r = 1;
+
+	if (host->pdata->slots[host->slot_id].get_cover_state)
+		r = host->pdata->slots[host->slot_id].get_cover_state(host->dev,
+			host->slot_id);
+	return r;
+}
+
+static ssize_t
+mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" :
+		       "open");
+}
+
+static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
+
+static ssize_t
+mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id];
+
+	return sprintf(buf, "slot:%s\n", slot.name);
+}
+
+static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL);
+
+/*
+ * Configure the response type and send the cmd.
+ */
+static void
+mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd,
+	struct mmc_data *data)
+{
+	int cmdreg = 0, resptype = 0, cmdtype = 0;
+
+	dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n",
+		mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
+	host->cmd = cmd;
+
+	/*
+	 * Clear status bits and enable interrupts
+	 */
+	OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136)
+			resptype = 1;
+		else
+			resptype = 2;
+	}
+
+	/*
+	 * Unlike OMAP1 controller, the cmdtype does not seem to be based on
+	 * ac, bc, adtc, bcr. Only commands ending an open ended transfer need
+	 * a val of 0x3, rest 0x0.
+	 */
+	if (cmd == host->mrq->stop)
+		cmdtype = 0x3;
+
+	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+
+	if (data) {
+		cmdreg |= DP_SELECT | MSBS | BCE;
+		if (data->flags & MMC_DATA_READ)
+			cmdreg |= DDIR;
+		else
+			cmdreg &= ~(DDIR);
+	}
+
+	if (host->use_dma)
+		cmdreg |= DMA_EN;
+
+	OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg);
+	OMAP_HSMMC_WRITE(host->base, CMD, cmdreg);
+}
+
+/*
+ * Notify the transfer complete to MMC core
+ */
+static void
+mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
+{
+	host->data = NULL;
+
+	if (host->use_dma && host->dma_ch != -1)
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
+			host->dma_dir);
+
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+
+	if (!data->error)
+		data->bytes_xfered += data->blocks * (data->blksz);
+	else
+		data->bytes_xfered = 0;
+
+	if (!data->stop) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, data->mrq);
+		return;
+	}
+	mmc_omap_start_command(host, data->stop, NULL);
+}
+
+/*
+ * Notify the core about command completion
+ */
+static void
+mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
+{
+	host->cmd = NULL;
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			/* response type 2 */
+			cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10);
+			cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32);
+			cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54);
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76);
+		} else {
+			/* response types 1, 1b, 3, 4, 5, 6 */
+			cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10);
+		}
+	}
+	if (host->data == NULL || cmd->error) {
+		host->mrq = NULL;
+		mmc_request_done(host->mmc, cmd->mrq);
+	}
+}
+
+/*
+ * DMA clean up for command errors
+ */
+static void mmc_dma_cleanup(struct mmc_omap_host *host)
+{
+	host->data->error = -ETIMEDOUT;
+
+	if (host->use_dma && host->dma_ch != -1) {
+		dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len,
+			host->dma_dir);
+		omap_free_dma(host->dma_ch);
+		host->dma_ch = -1;
+		up(&host->sem);
+	}
+	host->data = NULL;
+	host->datadir = OMAP_MMC_DATADIR_NONE;
+}
+
+/*
+ * Readable error output
+ */
+#ifdef CONFIG_MMC_DEBUG
+static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status)
+{
+	/* --- means reserved bit without definition at documentation */
+	static const char *mmc_omap_status_bits[] = {
+		"CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ",
+		"OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC",
+		"CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---",
+		"---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---"
+	};
+	char res[256];
+	char *buf = res;
+	int len, i;
+
+	len = sprintf(buf, "MMC IRQ 0x%x :", status);
+	buf += len;
+
+	for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
+		if (status & (1 << i)) {
+			len = sprintf(buf, " %s", mmc_omap_status_bits[i]);
+			buf += len;
+		}
+
+	dev_dbg(mmc_dev(host->mmc), "%s\n", res);
+}
+#endif  /* CONFIG_MMC_DEBUG */
+
+
+/*
+ * MMC controller IRQ handler
+ */
+static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = dev_id;
+	struct mmc_data *data;
+	int end_cmd = 0, end_trans = 0, status;
+
+	if (host->cmd == NULL && host->data == NULL) {
+		OMAP_HSMMC_WRITE(host->base, STAT,
+			OMAP_HSMMC_READ(host->base, STAT));
+		return IRQ_HANDLED;
+	}
+
+	data = host->data;
+	status = OMAP_HSMMC_READ(host->base, STAT);
+	dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
+
+	if (status & ERR) {
+#ifdef CONFIG_MMC_DEBUG
+		mmc_omap_report_irq(host, status);
+#endif
+		if ((status & CMD_TIMEOUT) ||
+			(status & CMD_CRC)) {
+			if (host->cmd) {
+				if (status & CMD_TIMEOUT) {
+					OMAP_HSMMC_WRITE(host->base, SYSCTL,
+						OMAP_HSMMC_READ(host->base,
+								SYSCTL) | SRC);
+					while (OMAP_HSMMC_READ(host->base,
+							SYSCTL) & SRC)
+						;
+
+					host->cmd->error = -ETIMEDOUT;
+				} else {
+					host->cmd->error = -EILSEQ;
+				}
+				end_cmd = 1;
+			}
+			if (host->data)
+				mmc_dma_cleanup(host);
+		}
+		if ((status & DATA_TIMEOUT) ||
+			(status & DATA_CRC)) {
+			if (host->data) {
+				if (status & DATA_TIMEOUT)
+					mmc_dma_cleanup(host);
+				else
+					host->data->error = -EILSEQ;
+				OMAP_HSMMC_WRITE(host->base, SYSCTL,
+					OMAP_HSMMC_READ(host->base,
+							SYSCTL) | SRD);
+				while (OMAP_HSMMC_READ(host->base,
+						SYSCTL) & SRD)
+					;
+				end_trans = 1;
+			}
+		}
+		if (status & CARD_ERR) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Ignoring card err CMD%d\n", host->cmd->opcode);
+			if (host->cmd)
+				end_cmd = 1;
+			if (host->data)
+				end_trans = 1;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, STAT, status);
+
+	if (end_cmd || (status & CC))
+		mmc_omap_cmd_done(host, host->cmd);
+	if (end_trans || (status & TC))
+		mmc_omap_xfer_done(host, data);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Switch MMC operating voltage
+ */
+static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd)
+{
+	u32 reg_val = 0;
+	int ret;
+
+	/* Disable the clocks */
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_disable(host->dbclk);
+
+	/* Turn the power off */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+	if (ret != 0)
+		goto err;
+
+	/* Turn the power ON with given VDD 1.8 or 3.0v */
+	ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+	if (ret != 0)
+		goto err;
+
+	clk_enable(host->fclk);
+	clk_enable(host->iclk);
+	clk_enable(host->dbclk);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR);
+	reg_val = OMAP_HSMMC_READ(host->base, HCTL);
+	/*
+	 * If a MMC dual voltage card is detected, the set_ios fn calls
+	 * this fn with VDD bit set for 1.8V. Upon card removal from the
+	 * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF.
+	 *
+	 * Only MMC1 supports 3.0V.  MMC2 will not function if SDVS30 is
+	 * set in HCTL.
+	 */
+	if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) ||
+				((1 << vdd) == MMC_VDD_33_34)))
+		reg_val |= SDVS30;
+	if ((1 << vdd) == MMC_VDD_165_195)
+		reg_val |= SDVS18;
+
+	OMAP_HSMMC_WRITE(host->base, HCTL, reg_val);
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+		OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	return 0;
+err:
+	dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n");
+	return ret;
+}
+
+/*
+ * Work Item to notify the core about card insertion/removal
+ */
+static void mmc_omap_detect(struct work_struct *work)
+{
+	struct mmc_omap_host *host = container_of(work, struct mmc_omap_host,
+						mmc_carddetect_work);
+
+	sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
+	if (host->carddetect) {
+		mmc_detect_change(host->mmc, (HZ * 200) / 1000);
+	} else {
+		OMAP_HSMMC_WRITE(host->base, SYSCTL,
+			OMAP_HSMMC_READ(host->base, SYSCTL) | SRD);
+		while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD)
+			;
+
+		mmc_detect_change(host->mmc, (HZ * 50) / 1000);
+	}
+}
+
+/*
+ * ISR for handling card insertion and removal
+ */
+static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id)
+{
+	struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id;
+
+	host->carddetect = mmc_slot(host).card_detect(irq);
+	schedule_work(&host->mmc_carddetect_work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * DMA call back function
+ */
+static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct mmc_omap_host *host = data;
+
+	if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ)
+		dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n");
+
+	if (host->dma_ch < 0)
+		return;
+
+	omap_free_dma(host->dma_ch);
+	host->dma_ch = -1;
+	/*
+	 * DMA Callback: run in interrupt context.
+	 * mutex_unlock will through a kernel warning if used.
+	 */
+	up(&host->sem);
+}
+
+/*
+ * Configure dma src and destination parameters
+ */
+static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host,
+				struct mmc_data *data)
+{
+	if (sync_dir == 0) {
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	} else {
+		omap_set_dma_src_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_CONSTANT,
+			(host->mapbase + OMAP_HSMMC_DATA), 0, 0);
+		omap_set_dma_dest_params(host->dma_ch, 0,
+			OMAP_DMA_AMODE_POST_INC,
+			sg_dma_address(&data->sg[0]), 0, 0);
+	}
+	return 0;
+}
+/*
+ * Routine to configure and start DMA for the MMC card
+ */
+static int
+mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int sync_dev, sync_dir = 0;
+	int dma_ch = 0, ret = 0, err = 1;
+	struct mmc_data *data = req->data;
+
+	/*
+	 * If for some reason the DMA transfer is still active,
+	 * we wait for timeout period and free the dma
+	 */
+	if (host->dma_ch != -1) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(100);
+		if (down_trylock(&host->sem)) {
+			omap_free_dma(host->dma_ch);
+			host->dma_ch = -1;
+			up(&host->sem);
+			return err;
+		}
+	} else {
+		if (down_trylock(&host->sem))
+			return err;
+	}
+
+	if (!(data->flags & MMC_DATA_WRITE)) {
+		host->dma_dir = DMA_FROM_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_RX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_RX;
+	} else {
+		host->dma_dir = DMA_TO_DEVICE;
+		if (host->id == OMAP_MMC1_DEVID)
+			sync_dev = OMAP24XX_DMA_MMC1_TX;
+		else
+			sync_dev = OMAP24XX_DMA_MMC2_TX;
+	}
+
+	ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb,
+			host, &dma_ch);
+	if (ret != 0) {
+		dev_dbg(mmc_dev(host->mmc),
+			"%s: omap_request_dma() failed with %d\n",
+			mmc_hostname(host->mmc), ret);
+		return ret;
+	}
+
+	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
+			data->sg_len, host->dma_dir);
+	host->dma_ch = dma_ch;
+
+	if (!(data->flags & MMC_DATA_WRITE))
+		mmc_omap_config_dma_param(1, host, data);
+	else
+		mmc_omap_config_dma_param(0, host, data);
+
+	if ((data->blksz % 4) == 0)
+		omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32,
+			(data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME,
+			sync_dev, sync_dir);
+	else
+		/* REVISIT: The MMC buffer increments only when MSB is written.
+		 * Return error for blksz which is non multiple of four.
+		 */
+		return -EINVAL;
+
+	omap_start_dma(dma_ch);
+	return 0;
+}
+
+static void set_data_timeout(struct mmc_omap_host *host,
+			     struct mmc_request *req)
+{
+	unsigned int timeout, cycle_ns;
+	uint32_t reg, clkd, dto = 0;
+
+	reg = OMAP_HSMMC_READ(host->base, SYSCTL);
+	clkd = (reg & CLKD_MASK) >> CLKD_SHIFT;
+	if (clkd == 0)
+		clkd = 1;
+
+	cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+	timeout = req->data->timeout_ns / cycle_ns;
+	timeout += req->data->timeout_clks;
+	if (timeout) {
+		while ((timeout & 0x80000000) == 0) {
+			dto += 1;
+			timeout <<= 1;
+		}
+		dto = 31 - dto;
+		timeout <<= 1;
+		if (timeout && dto)
+			dto += 1;
+		if (dto >= 13)
+			dto -= 13;
+		else
+			dto = 0;
+		if (dto > 14)
+			dto = 14;
+	}
+
+	reg &= ~DTO_MASK;
+	reg |= dto << DTO_SHIFT;
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
+}
+
+/*
+ * Configure block length for MMC/SD cards and initiate the transfer.
+ */
+static int
+mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
+{
+	int ret;
+	host->data = req->data;
+
+	if (req->data == NULL) {
+		host->datadir = OMAP_MMC_DATADIR_NONE;
+		OMAP_HSMMC_WRITE(host->base, BLK, 0);
+		return 0;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+					| (req->data->blocks << 16));
+	set_data_timeout(host, req);
+
+	host->datadir = (req->data->flags & MMC_DATA_WRITE) ?
+			OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ;
+
+	if (host->use_dma) {
+		ret = mmc_omap_start_dma_transfer(host, req);
+		if (ret != 0) {
+			dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+/*
+ * Request function. for read/write operation
+ */
+static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+
+	WARN_ON(host->mrq != NULL);
+	host->mrq = req;
+	mmc_omap_prepare_data(host, req);
+	mmc_omap_start_command(host, req->cmd, req->data);
+}
+
+
+/* Routine to configure clock values. Exposed API to core */
+static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	u16 dsor = 0;
+	unsigned long regval;
+	unsigned long timeout;
+
+	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+		/*
+		 * Reset bus voltage to 3V if it got set to 1.8V earlier.
+		 * REVISIT: If we are able to detect cards after unplugging
+		 * a 1.8V card, this code should not be needed.
+		 */
+		if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+			int vdd = fls(host->mmc->ocr_avail) - 1;
+			if (omap_mmc_switch_opcond(host, vdd) != 0)
+				host->mmc->ios.vdd = vdd;
+		}
+		break;
+	case MMC_POWER_UP:
+		mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd);
+		break;
+	}
+
+	switch (mmc->ios.bus_width) {
+	case MMC_BUS_WIDTH_4:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
+		break;
+	case MMC_BUS_WIDTH_1:
+		OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT);
+		break;
+	}
+
+	if (host->id == OMAP_MMC1_DEVID) {
+		/* Only MMC1 can operate at 3V/1.8V */
+		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
+			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
+				/*
+				 * The mmc_select_voltage fn of the core does
+				 * not seem to set the power_mode to
+				 * MMC_POWER_UP upon recalculating the voltage.
+				 * vdd 1.8v.
+				 */
+				if (omap_mmc_switch_opcond(host, ios->vdd) != 0)
+					dev_dbg(mmc_dev(host->mmc),
+						"Switch operation failed\n");
+		}
+	}
+
+	if (ios->clock) {
+		dsor = OMAP_MMC_MASTER_CLOCK / ios->clock;
+		if (dsor < 1)
+			dsor = 1;
+
+		if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock)
+			dsor++;
+
+		if (dsor > 250)
+			dsor = 250;
+	}
+	omap_mmc_stop_clock(host);
+	regval = OMAP_HSMMC_READ(host->base, SYSCTL);
+	regval = regval & ~(CLKD_MASK);
+	regval = regval | (dsor << 6) | (DTO << 16);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL, regval);
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | ICE);
+
+	/* Wait till the ICS bit is set */
+	timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS);
+	while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2
+		&& time_before(jiffies, timeout))
+		msleep(1);
+
+	OMAP_HSMMC_WRITE(host->base, SYSCTL,
+		OMAP_HSMMC_READ(host->base, SYSCTL) | CEN);
+
+	if (ios->power_mode == MMC_POWER_ON)
+		send_init_stream(host);
+
+	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
+		OMAP_HSMMC_WRITE(host->base, CON,
+				OMAP_HSMMC_READ(host->base, CON) | OD);
+}
+
+static int omap_hsmmc_get_cd(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].card_detect)
+		return -ENOSYS;
+	return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq);
+}
+
+static int omap_hsmmc_get_ro(struct mmc_host *mmc)
+{
+	struct mmc_omap_host *host = mmc_priv(mmc);
+	struct omap_mmc_platform_data *pdata = host->pdata;
+
+	if (!pdata->slots[0].get_ro)
+		return -ENOSYS;
+	return pdata->slots[0].get_ro(host->dev, 0);
+}
+
+static struct mmc_host_ops mmc_omap_ops = {
+	.request = omap_mmc_request,
+	.set_ios = omap_mmc_set_ios,
+	.get_cd = omap_hsmmc_get_cd,
+	.get_ro = omap_hsmmc_get_ro,
+	/* NYET -- enable_sdio_irq */
+};
+
+static int __init omap_mmc_probe(struct platform_device *pdev)
+{
+	struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+	struct mmc_host *mmc;
+	struct mmc_omap_host *host = NULL;
+	struct resource *res;
+	int ret = 0, irq;
+	u32 hctl, capa;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "Platform Data is missing\n");
+		return -ENXIO;
+	}
+
+	if (pdata->nr_slots == 0) {
+		dev_err(&pdev->dev, "No Slots\n");
+		return -ENXIO;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (res == NULL || irq < 0)
+		return -ENXIO;
+
+	res = request_mem_region(res->start, res->end - res->start + 1,
+							pdev->name);
+	if (res == NULL)
+		return -EBUSY;
+
+	mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
+	if (!mmc) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	host		= mmc_priv(mmc);
+	host->mmc	= mmc;
+	host->pdata	= pdata;
+	host->dev	= &pdev->dev;
+	host->use_dma	= 1;
+	host->dev->dma_mask = &pdata->dma_mask;
+	host->dma_ch	= -1;
+	host->irq	= irq;
+	host->id	= pdev->id;
+	host->slot_id	= 0;
+	host->mapbase	= res->start;
+	host->base	= ioremap(host->mapbase, SZ_4K);
+
+	platform_set_drvdata(pdev, host);
+	INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect);
+
+	mmc->ops	= &mmc_omap_ops;
+	mmc->f_min	= 400000;
+	mmc->f_max	= 52000000;
+
+	sema_init(&host->sem, 1);
+
+	host->iclk = clk_get(&pdev->dev, "mmchs_ick");
+	if (IS_ERR(host->iclk)) {
+		ret = PTR_ERR(host->iclk);
+		host->iclk = NULL;
+		goto err1;
+	}
+	host->fclk = clk_get(&pdev->dev, "mmchs_fck");
+	if (IS_ERR(host->fclk)) {
+		ret = PTR_ERR(host->fclk);
+		host->fclk = NULL;
+		clk_put(host->iclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->fclk) != 0) {
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	if (clk_enable(host->iclk) != 0) {
+		clk_disable(host->fclk);
+		clk_put(host->iclk);
+		clk_put(host->fclk);
+		goto err1;
+	}
+
+	host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
+	/*
+	 * MMC can still work without debounce clock.
+	 */
+	if (IS_ERR(host->dbclk))
+		dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n");
+	else
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
+							" clk failed\n");
+		else
+			host->dbclk_enabled = 1;
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+	mmc->max_phys_segs = 1;
+	mmc->max_hw_segs = 1;
+#endif
+	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
+	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
+	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_seg_size = mmc->max_req_size;
+
+	mmc->ocr_avail = mmc_slot(host).ocr_mask;
+	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+	if (pdata->slots[host->slot_id].wires >= 4)
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
+
+	/* Only MMC1 supports 3.0V */
+	if (host->id == OMAP_MMC1_DEVID) {
+		hctl = SDVS30;
+		capa = VS30 | VS18;
+	} else {
+		hctl = SDVS18;
+		capa = VS18;
+	}
+
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | hctl);
+
+	OMAP_HSMMC_WRITE(host->base, CAPA,
+			OMAP_HSMMC_READ(host->base, CAPA) | capa);
+
+	/* Set the controller to AUTO IDLE mode */
+	OMAP_HSMMC_WRITE(host->base, SYSCONFIG,
+			OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE);
+
+	/* Set SD bus power bit */
+	OMAP_HSMMC_WRITE(host->base, HCTL,
+			OMAP_HSMMC_READ(host->base, HCTL) | SDBP);
+
+	/* Request IRQ for MMC operations */
+	ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED,
+			mmc_hostname(mmc), host);
+	if (ret) {
+		dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n");
+		goto err_irq;
+	}
+
+	if (pdata->init != NULL) {
+		if (pdata->init(&pdev->dev) != 0) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to configure MMC IRQs\n");
+			goto err_irq_cd_init;
+		}
+	}
+
+	/* Request IRQ for card detect */
+	if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) {
+		ret = request_irq(mmc_slot(host).card_detect_irq,
+				  omap_mmc_cd_handler,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
+					  | IRQF_DISABLED,
+				  mmc_hostname(mmc), host);
+		if (ret) {
+			dev_dbg(mmc_dev(host->mmc),
+				"Unable to grab MMC CD IRQ\n");
+			goto err_irq_cd;
+		}
+	}
+
+	OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK);
+	OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK);
+
+	mmc_add_host(mmc);
+
+	if (host->pdata->slots[host->slot_id].name != NULL) {
+		ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
+		if (ret < 0)
+			goto err_slot_name;
+	}
+	if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect &&
+			host->pdata->slots[host->slot_id].get_cover_state) {
+		ret = device_create_file(&mmc->class_dev,
+					&dev_attr_cover_switch);
+		if (ret < 0)
+			goto err_cover_switch;
+	}
+
+	return 0;
+
+err_cover_switch:
+	device_remove_file(&mmc->class_dev, &dev_attr_cover_switch);
+err_slot_name:
+	mmc_remove_host(mmc);
+err_irq_cd:
+	free_irq(mmc_slot(host).card_detect_irq, host);
+err_irq_cd_init:
+	free_irq(host->irq, host);
+err_irq:
+	clk_disable(host->fclk);
+	clk_disable(host->iclk);
+	clk_put(host->fclk);
+	clk_put(host->iclk);
+	if (host->dbclk_enabled) {
+		clk_disable(host->dbclk);
+		clk_put(host->dbclk);
+	}
+
+err1:
+	iounmap(host->base);
+err:
+	dev_dbg(mmc_dev(host->mmc), "Probe Failed\n");
+	release_mem_region(res->start, res->end - res->start + 1);
+	if (host)
+		mmc_free_host(mmc);
+	return ret;
+}
+
+static int omap_mmc_remove(struct platform_device *pdev)
+{
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	if (host) {
+		mmc_remove_host(host->mmc);
+		if (host->pdata->cleanup)
+			host->pdata->cleanup(&pdev->dev);
+		free_irq(host->irq, host);
+		if (mmc_slot(host).card_detect_irq)
+			free_irq(mmc_slot(host).card_detect_irq, host);
+		flush_scheduled_work();
+
+		clk_disable(host->fclk);
+		clk_disable(host->iclk);
+		clk_put(host->fclk);
+		clk_put(host->iclk);
+		if (host->dbclk_enabled) {
+			clk_disable(host->dbclk);
+			clk_put(host->dbclk);
+		}
+
+		mmc_free_host(host->mmc);
+		iounmap(host->base);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, res->end - res->start + 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && host->suspended)
+		return 0;
+
+	if (host) {
+		ret = mmc_suspend_host(host->mmc, state);
+		if (ret == 0) {
+			host->suspended = 1;
+
+			OMAP_HSMMC_WRITE(host->base, ISE, 0);
+			OMAP_HSMMC_WRITE(host->base, IE, 0);
+
+			if (host->pdata->suspend) {
+				ret = host->pdata->suspend(&pdev->dev,
+								host->slot_id);
+				if (ret)
+					dev_dbg(mmc_dev(host->mmc),
+						"Unable to handle MMC board"
+						" level suspend\n");
+			}
+
+			if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) {
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					& SDVSCLR);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDVS30);
+				OMAP_HSMMC_WRITE(host->base, HCTL,
+					OMAP_HSMMC_READ(host->base, HCTL)
+					| SDBP);
+			}
+
+			clk_disable(host->fclk);
+			clk_disable(host->iclk);
+			clk_disable(host->dbclk);
+		}
+
+	}
+	return ret;
+}
+
+/* Routine to resume the MMC device */
+static int omap_mmc_resume(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct mmc_omap_host *host = platform_get_drvdata(pdev);
+
+	if (host && !host->suspended)
+		return 0;
+
+	if (host) {
+
+		ret = clk_enable(host->fclk);
+		if (ret)
+			goto clk_en_err;
+
+		ret = clk_enable(host->iclk);
+		if (ret) {
+			clk_disable(host->fclk);
+			clk_put(host->fclk);
+			goto clk_en_err;
+		}
+
+		if (clk_enable(host->dbclk) != 0)
+			dev_dbg(mmc_dev(host->mmc),
+					"Enabling debounce clk failed\n");
+
+		if (host->pdata->resume) {
+			ret = host->pdata->resume(&pdev->dev, host->slot_id);
+			if (ret)
+				dev_dbg(mmc_dev(host->mmc),
+					"Unmask interrupt failed\n");
+		}
+
+		/* Notify the core to resume the host */
+		ret = mmc_resume_host(host->mmc);
+		if (ret == 0)
+			host->suspended = 0;
+	}
+
+	return ret;
+
+clk_en_err:
+	dev_dbg(mmc_dev(host->mmc),
+		"Failed to enable MMC clocks during resume\n");
+	return ret;
+}
+
+#else
+#define omap_mmc_suspend	NULL
+#define omap_mmc_resume		NULL
+#endif
+
+static struct platform_driver omap_mmc_driver = {
+	.probe		= omap_mmc_probe,
+	.remove		= omap_mmc_remove,
+	.suspend	= omap_mmc_suspend,
+	.resume		= omap_mmc_resume,
+	.driver		= {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init omap_mmc_init(void)
+{
+	/* Register the MMC driver */
+	return platform_driver_register(&omap_mmc_driver);
+}
+
+static void __exit omap_mmc_cleanup(void)
+{
+	/* Unregister MMC driver */
+	platform_driver_unregister(&omap_mmc_driver);
+}
+
+module_init(omap_mmc_init);
+module_exit(omap_mmc_cleanup);
+
+MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index fcc98a4..35a98ee 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -20,7 +20,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <asm/dma.h>
+#include <mach/dma.h>
 
 #include <mach/regs-sdi.h>
 #include <mach/regs-gpio.h>
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 96ecc17..77a4f14 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -629,7 +629,7 @@
 	}
 
 	if (c->gpio_irq) {
-		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+		if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
 			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
 				"OneNAND\n", c->gpio_irq);
 			goto err_iounmap;
@@ -726,7 +726,7 @@
 		free_irq(gpio_to_irq(c->gpio_irq), c);
 err_release_gpio:
 	if (c->gpio_irq)
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 err_iounmap:
 	iounmap(c->onenand.base);
 err_release_mem_region:
@@ -761,7 +761,7 @@
 	platform_set_drvdata(pdev, NULL);
 	if (c->gpio_irq) {
 		free_irq(gpio_to_irq(c->gpio_irq), c);
-		omap_free_gpio(c->gpio_irq);
+		gpio_free(c->gpio_irq);
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 0c628a9..c2d012fc 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -208,9 +208,9 @@
 	/*
 	 * Stop the chip.
 	 */
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
 	write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
@@ -332,10 +332,10 @@
 	netif_stop_queue(dev);
 	netif_carrier_off(dev);
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_STOP);
 	write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	free_irq (dev->irq, dev);
 
@@ -391,7 +391,7 @@
 			am79c961_mc_hash(dmi, multi_hash);
 	}
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 
 	stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
 
@@ -405,9 +405,9 @@
 		 * Spin waiting for chip to report suspend mode
 		 */
 		while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
-			spin_unlock_irqrestore(priv->chip_lock, flags);
+			spin_unlock_irqrestore(&priv->chip_lock, flags);
 			nop();
-			spin_lock_irqsave(priv->chip_lock, flags);
+			spin_lock_irqsave(&priv->chip_lock, flags);
 		}
 	}
 
@@ -429,7 +429,7 @@
 		write_rreg(dev->base_addr, CTRL1, 0);
 	}
 
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 }
 
 static void am79c961_timeout(struct net_device *dev)
@@ -467,10 +467,10 @@
 	am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
 	priv->txhead = head;
 
-	spin_lock_irqsave(priv->chip_lock, flags);
+	spin_lock_irqsave(&priv->chip_lock, flags);
 	write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
 	dev->trans_start = jiffies;
-	spin_unlock_irqrestore(priv->chip_lock, flags);
+	spin_unlock_irqrestore(&priv->chip_lock, flags);
 
 	/*
 	 * If the next packet is owned by the ethernet device,
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 6fcccef..15a5cf0 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -1,6 +1,6 @@
 /* bnx2x.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -271,14 +271,7 @@
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
 
-#define BNX2X_HAS_TX_WORK(fp) \
-			((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
-			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
-
-#define BNX2X_HAS_RX_WORK(fp) \
-			(fp->rx_comp_cons != rx_cons_sb)
-
-#define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
+#define BNX2X_HAS_WORK(fp)	(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
 
 
 /* MC hsi */
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index fefa6ab..aea26b4 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1,4 +1,4 @@
-/* Copyright 2008 Broadcom Corporation
+/* Copyright 2008-2009 Broadcom Corporation
  *
  * Unless you and Broadcom execute a separate written software license
  * agreement governing use of this software, this software is licensed to you
@@ -317,6 +317,9 @@
 		val &= ~0x810;
 	EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
 
+	/* enable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
+
 	/* enable emac for jumbo packets */
 	EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
 		(EMAC_RX_MTU_SIZE_JUMBO_ENA |
@@ -1609,7 +1612,7 @@
 				      u32 gp_status)
 {
 	struct bnx2x *bp = params->bp;
-
+	u16 new_line_speed;
 	u8 rc = 0;
 	vars->link_status = 0;
 
@@ -1629,7 +1632,7 @@
 
 		switch (gp_status & GP_STATUS_SPEED_MASK) {
 		case GP_STATUS_10M:
-			vars->line_speed = SPEED_10;
+			new_line_speed = SPEED_10;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_10TFD;
 			else
@@ -1637,7 +1640,7 @@
 			break;
 
 		case GP_STATUS_100M:
-			vars->line_speed = SPEED_100;
+			new_line_speed = SPEED_100;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_100TXFD;
 			else
@@ -1646,7 +1649,7 @@
 
 		case GP_STATUS_1G:
 		case GP_STATUS_1G_KX:
-			vars->line_speed = SPEED_1000;
+			new_line_speed = SPEED_1000;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_1000TFD;
 			else
@@ -1654,7 +1657,7 @@
 			break;
 
 		case GP_STATUS_2_5G:
-			vars->line_speed = SPEED_2500;
+			new_line_speed = SPEED_2500;
 			if (vars->duplex == DUPLEX_FULL)
 				vars->link_status |= LINK_2500TFD;
 			else
@@ -1671,32 +1674,32 @@
 		case GP_STATUS_10G_KX4:
 		case GP_STATUS_10G_HIG:
 		case GP_STATUS_10G_CX4:
-			vars->line_speed = SPEED_10000;
+			new_line_speed = SPEED_10000;
 			vars->link_status |= LINK_10GTFD;
 			break;
 
 		case GP_STATUS_12G_HIG:
-			vars->line_speed = SPEED_12000;
+			new_line_speed = SPEED_12000;
 			vars->link_status |= LINK_12GTFD;
 			break;
 
 		case GP_STATUS_12_5G:
-			vars->line_speed = SPEED_12500;
+			new_line_speed = SPEED_12500;
 			vars->link_status |= LINK_12_5GTFD;
 			break;
 
 		case GP_STATUS_13G:
-			vars->line_speed = SPEED_13000;
+			new_line_speed = SPEED_13000;
 			vars->link_status |= LINK_13GTFD;
 			break;
 
 		case GP_STATUS_15G:
-			vars->line_speed = SPEED_15000;
+			new_line_speed = SPEED_15000;
 			vars->link_status |= LINK_15GTFD;
 			break;
 
 		case GP_STATUS_16G:
-			vars->line_speed = SPEED_16000;
+			new_line_speed = SPEED_16000;
 			vars->link_status |= LINK_16GTFD;
 			break;
 
@@ -1708,6 +1711,15 @@
 			break;
 		}
 
+		/* Upon link speed change set the NIG into drain mode.
+		Comes to deals with possible FIFO glitch due to clk change
+		when speed is decreased without link down indicator */
+		if (new_line_speed != vars->line_speed) {
+			REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
+				    + params->port*4, 0);
+			msleep(1);
+		}
+		vars->line_speed = new_line_speed;
 		vars->link_status |= LINK_STATUS_SERDES_LINK;
 
 		if ((params->req_line_speed == SPEED_AUTO_NEG) &&
@@ -3571,7 +3583,7 @@
 			       (MDIO_REG_BANK_CL73_IEEEB0 +
 				(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
 			       0x6041);
-
+		msleep(200);
 		/* set aer mmd back */
 		bnx2x_set_aer_mmd(params, vars);
 
@@ -3870,9 +3882,15 @@
 	}
 
 	if (vars->phy_flags & PHY_XGXS_FLAG) {
-		if (params->req_line_speed &&
+		if ((params->req_line_speed &&
 		    ((params->req_line_speed == SPEED_100) ||
-		     (params->req_line_speed == SPEED_10))) {
+		     (params->req_line_speed == SPEED_10))) ||
+		    (!params->req_line_speed &&
+		     (params->speed_cap_mask >=
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
+		     (params->speed_cap_mask <
+		       PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		     ))  {
 			vars->phy_flags |= PHY_SGMII_FLAG;
 		} else {
 			vars->phy_flags &= ~PHY_SGMII_FLAG;
@@ -4194,6 +4212,11 @@
 	/* activate nig drain */
 	REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
+	msleep(10);
+
 	/* reset BigMac */
 	bnx2x_bmac_rx_disable(bp, params->port);
 	REG_WR(bp, GRCBASE_MISC +
@@ -4238,6 +4261,7 @@
 
 	/* update shared memory */
 	bnx2x_update_mng(params, vars->link_status);
+	msleep(20);
 	return rc;
 }
 /* This function should called upon link interrupt */
@@ -4276,6 +4300,9 @@
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
 	  REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
 
+	/* disable emac */
+	REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+
 	ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
 
 	/* Check external link change only for non-direct */
@@ -4377,10 +4404,11 @@
 			      ext_phy_addr[port],
 			      MDIO_PMA_DEVAD,
 			      MDIO_PMA_REG_ROM_VER1, &fw_ver1);
-		if (fw_ver1 == 0) {
+		if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
 			DP(NETIF_MSG_LINK,
-				 "bnx2x_8073_common_init_phy port %x "
-				 "fw Download failed\n", port);
+				 "bnx2x_8073_common_init_phy port %x:"
+				 "Download failed. fw version = 0x%x\n",
+				 port, fw_ver1);
 			return -EINVAL;
 		}
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 7c53379..d3e7775 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1,6 +1,6 @@
 /* bnx2x_main.c: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -57,8 +57,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION	"1.45.23"
-#define DRV_MODULE_RELDATE	"2008/11/03"
+#define DRV_MODULE_VERSION	"1.45.26"
+#define DRV_MODULE_RELDATE	"2009/01/26"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -69,7 +69,7 @@
 	DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
 
 MODULE_AUTHOR("Eliezer Tamir");
-MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
@@ -733,6 +733,24 @@
  * fast path service functions
  */
 
+static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+	u16 tx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
+	return (fp->tx_pkt_cons != tx_cons_sb);
+}
+
+static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
+{
+	/* Tell compiler that consumer and producer can change */
+	barrier();
+	return (fp->tx_pkt_prod != fp->tx_pkt_cons);
+
+}
+
 /* free skb in the packet ring at pos idx
  * return idx of last bd freed
  */
@@ -5137,12 +5155,21 @@
 }
 
 
+static void bnx2x_reset_common(struct bnx2x *bp)
+{
+	/* reset_common */
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
+	       0xd3ffff7f);
+	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
+}
+
 static int bnx2x_init_common(struct bnx2x *bp)
 {
 	u32 val, i;
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
+	bnx2x_reset_common(bp);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
 
@@ -6123,8 +6150,8 @@
 static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 {
 	bnx2x_int_disable_sync(bp, disable_hw);
+	bnx2x_napi_disable(bp);
 	if (netif_running(bp->dev)) {
-		bnx2x_napi_disable(bp);
 		netif_tx_disable(bp->dev);
 		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 	}
@@ -6144,7 +6171,7 @@
 	 * multicast 64-127:port0 128-191:port1
 	 */
 	config->hdr.length_6b = 2;
-	config->hdr.offset = port ? 31 : 0;
+	config->hdr.offset = port ? 32 : 0;
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -6308,7 +6335,7 @@
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
 	u32 load_code;
-	int i, rc;
+	int i, rc = 0;
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
 		return -EPERM;
@@ -6316,6 +6343,77 @@
 
 	bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
+	if (use_inta) {
+		bp->num_queues = 1;
+
+	} else {
+		if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
+			/* user requested number */
+			bp->num_queues = use_multi;
+
+		else if (use_multi)
+			bp->num_queues = min_t(u32, num_online_cpus(),
+					       BP_MAX_QUEUES(bp));
+		else
+			bp->num_queues = 1;
+
+		DP(NETIF_MSG_IFUP,
+		   "set number of queues to %d\n", bp->num_queues);
+
+		/* if we can't use MSI-X we only need one fp,
+		 * so try to enable MSI-X with the requested number of fp's
+		 * and fallback to MSI or legacy INTx with one fp
+		 */
+		rc = bnx2x_enable_msix(bp);
+		if (rc) {
+			/* failed to enable MSI-X */
+			bp->num_queues = 1;
+			if (use_multi)
+				BNX2X_ERR("Multi requested but failed"
+					  " to enable MSI-X\n");
+		}
+	}
+
+	if (bnx2x_alloc_mem(bp))
+		return -ENOMEM;
+
+	for_each_queue(bp, i)
+		bnx2x_fp(bp, i, disable_tpa) =
+					((bp->flags & TPA_ENABLE_FLAG) == 0);
+
+	for_each_queue(bp, i)
+		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
+			       bnx2x_poll, 128);
+
+#ifdef BNX2X_STOP_ON_ERROR
+	for_each_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+
+		fp->poll_no_work = 0;
+		fp->poll_calls = 0;
+		fp->poll_max_calls = 0;
+		fp->poll_complete = 0;
+		fp->poll_exit = 0;
+	}
+#endif
+	bnx2x_napi_enable(bp);
+
+	if (bp->flags & USING_MSIX_FLAG) {
+		rc = bnx2x_req_msix_irqs(bp);
+		if (rc) {
+			pci_disable_msix(bp->pdev);
+			goto load_error1;
+		}
+		printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
+	} else {
+		bnx2x_ack_int(bp);
+		rc = bnx2x_req_irq(bp);
+		if (rc) {
+			BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);
+			goto load_error1;
+		}
+	}
+
 	/* Send LOAD_REQUEST command to MCP
 	   Returns the type of LOAD command:
 	   if it is the first port to be initialized
@@ -6325,10 +6423,13 @@
 		load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
-			return -EBUSY;
+			rc = -EBUSY;
+			goto load_error2;
 		}
-		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
-			return -EBUSY; /* other port in diagnostic mode */
+		if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
+			rc = -EBUSY; /* other port in diagnostic mode */
+			goto load_error2;
+		}
 
 	} else {
 		int port = BP_PORT(bp);
@@ -6354,66 +6455,11 @@
 		bp->port.pmf = 0;
 	DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
 
-	/* if we can't use MSI-X we only need one fp,
-	 * so try to enable MSI-X with the requested number of fp's
-	 * and fallback to inta with one fp
-	 */
-	if (use_inta) {
-		bp->num_queues = 1;
-
-	} else {
-		if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
-			/* user requested number */
-			bp->num_queues = use_multi;
-
-		else if (use_multi)
-			bp->num_queues = min_t(u32, num_online_cpus(),
-					       BP_MAX_QUEUES(bp));
-		else
-			bp->num_queues = 1;
-
-		if (bnx2x_enable_msix(bp)) {
-			/* failed to enable MSI-X */
-			bp->num_queues = 1;
-			if (use_multi)
-				BNX2X_ERR("Multi requested but failed"
-					  " to enable MSI-X\n");
-		}
-	}
-	DP(NETIF_MSG_IFUP,
-	   "set number of queues to %d\n", bp->num_queues);
-
-	if (bnx2x_alloc_mem(bp))
-		return -ENOMEM;
-
-	for_each_queue(bp, i)
-		bnx2x_fp(bp, i, disable_tpa) =
-					((bp->flags & TPA_ENABLE_FLAG) == 0);
-
-	if (bp->flags & USING_MSIX_FLAG) {
-		rc = bnx2x_req_msix_irqs(bp);
-		if (rc) {
-			pci_disable_msix(bp->pdev);
-			goto load_error;
-		}
-	} else {
-		bnx2x_ack_int(bp);
-		rc = bnx2x_req_irq(bp);
-		if (rc) {
-			BNX2X_ERR("IRQ request failed, aborting\n");
-			goto load_error;
-		}
-	}
-
-	for_each_queue(bp, i)
-		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
-			       bnx2x_poll, 128);
-
 	/* Initialize HW */
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_int_disable;
+		goto load_error2;
 	}
 
 	/* Setup NIC internals and enable interrupts */
@@ -6425,7 +6471,7 @@
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_rings_free;
+			goto load_error3;
 		}
 	}
 
@@ -6434,7 +6480,7 @@
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
 		BNX2X_ERR("Setup leading failed!\n");
-		goto load_netif_stop;
+		goto load_error3;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6447,7 +6493,7 @@
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_netif_stop;
+				goto load_error3;
 		}
 
 	if (CHIP_IS_E1(bp))
@@ -6463,18 +6509,18 @@
 	case LOAD_NORMAL:
 		/* Tx queue should be only reenabled */
 		netif_wake_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		break;
 
 	case LOAD_OPEN:
 		netif_start_queue(bp->dev);
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
-		if (bp->flags & USING_MSIX_FLAG)
-			printk(KERN_INFO PFX "%s: using MSI-X\n",
-			       bp->dev->name);
 		break;
 
 	case LOAD_DIAG:
+		/* Initialize the receive filter. */
 		bnx2x_set_rx_mode(bp->dev);
 		bp->state = BNX2X_STATE_DIAG;
 		break;
@@ -6492,20 +6538,25 @@
 
 	return 0;
 
-load_netif_stop:
-	bnx2x_napi_disable(bp);
-load_rings_free:
+load_error3:
+	bnx2x_int_disable_sync(bp, 1);
+	if (!BP_NOMCP(bp)) {
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
+		bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+	}
+	bp->port.pmf = 0;
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-load_int_disable:
-	bnx2x_int_disable_sync(bp, 1);
+load_error2:
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
-load_error:
+load_error1:
+	bnx2x_napi_disable(bp);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
-	bp->port.pmf = 0;
 
 	/* TBD we really need to reset the chip
 	   if we want to recover from this */
@@ -6578,6 +6629,7 @@
 		}
 		cnt--;
 		msleep(1);
+		rmb(); /* Refresh the dsb_sp_prod */
 	}
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
 	bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
@@ -6629,14 +6681,6 @@
 	/* TODO: Close Doorbell port? */
 }
 
-static void bnx2x_reset_common(struct bnx2x *bp)
-{
-	/* reset_common */
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
-	       0xd3ffff7f);
-	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
-}
-
 static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 {
 	DP(BNX2X_MSG_MCP, "function %d  reset_code %x\n",
@@ -6677,20 +6721,22 @@
 	bnx2x_set_storm_rx_mode(bp);
 
 	bnx2x_netif_stop(bp, 1);
-	if (!netif_running(bp->dev))
-		bnx2x_napi_disable(bp);
+
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
+
 	/* Wait until tx fast path tasks complete */
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		cnt = 1000;
 		smp_rmb();
-		while (BNX2X_HAS_TX_WORK(fp)) {
+		while (bnx2x_has_tx_work_unload(fp)) {
 
 			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
@@ -6711,9 +6757,6 @@
 	/* Give HW time to discard old tx messages */
 	msleep(1);
 
-	/* Release IRQs */
-	bnx2x_free_irq(bp);
-
 	if (CHIP_IS_E1(bp)) {
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
@@ -6822,6 +6865,8 @@
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
@@ -6874,10 +6919,6 @@
 		 */
 		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
-		if (val == 0x7)
-			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
-		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 			/* save our func */
@@ -6885,6 +6926,9 @@
 			u32 swap_en;
 			u32 swap_val;
 
+			/* clear the UNDI indication */
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+
 			BNX2X_DEV_INFO("UNDI is active! reset device\n");
 
 			/* try unload UNDI on port 0 */
@@ -6910,6 +6954,9 @@
 				bnx2x_fw_command(bp, reset_code);
 			}
 
+			/* now it's safe to release the lock */
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 			REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
 				    HC_REG_CONFIG_0), 0x1000);
 
@@ -6954,7 +7001,9 @@
 			bp->fw_seq =
 			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
 				DRV_MSG_SEQ_NUMBER_MASK);
-		}
+
+		} else
+			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 	}
 }
 
@@ -6971,7 +7020,7 @@
 	id |= ((val & 0xf) << 12);
 	val = REG_RD(bp, MISC_REG_CHIP_METAL);
 	id |= ((val & 0xff) << 4);
-	REG_RD(bp, MISC_REG_BOND_ID);
+	val = REG_RD(bp, MISC_REG_BOND_ID);
 	id |= (val & 0xf);
 	bp->common.chip_id = id;
 	bp->link_params.chip_id = bp->common.chip_id;
@@ -8103,6 +8152,9 @@
 	struct bnx2x *bp = netdev_priv(dev);
 	int rc;
 
+	if (!netif_running(dev))
+		return -EAGAIN;
+
 	DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
 	   DP_LEVEL "  magic 0x%x  offset 0x%x (%d)  len 0x%x (%d)\n",
 	   eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
@@ -8705,18 +8757,17 @@
 
 	if (loopback_mode == BNX2X_MAC_LOOPBACK) {
 		bp->link_params.loopback_mode = LOOPBACK_BMAC;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 
 	} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
+		u16 cnt = 1000;
 		bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
-		bnx2x_acquire_phy_lock(bp);
 		bnx2x_phy_init(&bp->link_params, &bp->link_vars);
-		bnx2x_release_phy_lock(bp);
 		/* wait until link state is restored */
-		bnx2x_wait_for_link(bp, link_up);
-
+		if (link_up)
+			while (cnt-- && bnx2x_test_link(&bp->link_params,
+							&bp->link_vars))
+				msleep(10);
 	} else
 		return -EINVAL;
 
@@ -8822,6 +8873,7 @@
 		return BNX2X_LOOPBACK_FAILED;
 
 	bnx2x_netif_stop(bp, 1);
+	bnx2x_acquire_phy_lock(bp);
 
 	if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
 		DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
@@ -8833,6 +8885,7 @@
 		rc |= BNX2X_PHY_LOOPBACK_FAILED;
 	}
 
+	bnx2x_release_phy_lock(bp);
 	bnx2x_netif_start(bp);
 
 	return rc;
@@ -8906,7 +8959,10 @@
 		return -ENODEV;
 
 	config->hdr.length_6b = 0;
-	config->hdr.offset = 0;
+	if (CHIP_IS_E1(bp))
+		config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
+	else
+		config->hdr.offset = BP_FUNC(bp);
 	config->hdr.client_id = BP_CL_ID(bp);
 	config->hdr.reserved1 = 0;
 
@@ -9271,6 +9327,18 @@
 	return 0;
 }
 
+static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
+{
+	u16 rx_cons_sb;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
+	return (fp->rx_comp_cons != rx_cons_sb);
+}
+
 /*
  * net_device service functions
  */
@@ -9281,7 +9349,6 @@
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
-	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9294,19 +9361,12 @@
 
 	bnx2x_update_fpsb_idx(fp);
 
-	if (BNX2X_HAS_TX_WORK(fp))
+	if (bnx2x_has_tx_work(fp))
 		bnx2x_tx_int(fp, budget);
 
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
-	if (BNX2X_HAS_RX_WORK(fp))
+	if (bnx2x_has_rx_work(fp))
 		work_done = bnx2x_rx_int(fp, budget);
-
 	rmb(); /* BNX2X_HAS_WORK() reads the status block */
-	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
-	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
-		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
 	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
@@ -9417,6 +9477,7 @@
 	return rc;
 }
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 /* check if packet requires linearization (packet is too fragmented) */
 static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 			     u32 xmit_type)
@@ -9494,6 +9555,7 @@
 
 	return to_copy;
 }
+#endif
 
 /* called with netif_tx_lock
  * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
@@ -9534,6 +9596,7 @@
 	   skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
 	   ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
 
+#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
 	/* First, check if we need to linearize the skb
 	   (due to FW restrictions) */
 	if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
@@ -9546,6 +9609,7 @@
 			return NETDEV_TX_OK;
 		}
 	}
+#endif
 
 	/*
 	Please read carefully. First we use one BD which we mark as start,
@@ -9776,6 +9840,8 @@
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
+	netif_carrier_off(dev);
+
 	bnx2x_set_power_state(bp, PCI_D0);
 
 	return bnx2x_nic_load(bp, LOAD_OPEN);
@@ -9859,7 +9925,7 @@
 				for (; i < old; i++) {
 					if (CAM_IS_INVALID(config->
 							   config_table[i])) {
-						i--; /* already invalidated */
+						/* already invalidated */
 						break;
 					}
 					/* invalidate */
@@ -10269,22 +10335,18 @@
 		return rc;
 	}
 
+	pci_set_drvdata(pdev, dev);
+
+	rc = bnx2x_init_bp(bp);
+	if (rc)
+		goto init_one_exit;
+
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
 		goto init_one_exit;
 	}
 
-	pci_set_drvdata(pdev, dev);
-
-	rc = bnx2x_init_bp(bp);
-	if (rc) {
-		unregister_netdev(dev);
-		goto init_one_exit;
-	}
-
-	netif_carrier_off(dev);
-
 	bp->common.name = board_info[ent->driver_data].name;
 	printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
 	       " IRQ %d, ", dev->name, bp->common.name,
@@ -10432,6 +10494,8 @@
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+	for_each_queue(bp, i)
+		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
 	bp->state = BNX2X_STATE_CLOSED;
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index a67b0c3..d084e5fc 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -1,6 +1,6 @@
 /* bnx2x_reg.h: Broadcom Everest network driver.
  *
- * Copyright (c) 2007-2008 Broadcom Corporation
+ * Copyright (c) 2007-2009 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 14f9fb3..379a132 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2104,6 +2104,7 @@
 {
 	lro_mgr->dev = qs->netdev;
 	lro_mgr->features = LRO_F_NAPI;
+	lro_mgr->frag_align_pad = NET_IP_ALIGN;
 	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
 	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
 	lro_mgr->max_desc = T3_MAX_LRO_SES;
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index cf43ee74..0890162 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -981,11 +981,15 @@
 		ew32(PBA_ECC, reg);
 	}
 
-	/* PCI-Ex Control Register */
+	/* PCI-Ex Control Registers */
 	if (hw->mac.type == e1000_82574) {
 		reg = er32(GCR);
 		reg |= (1 << 22);
 		ew32(GCR, reg);
+
+		reg = er32(GCR2);
+		reg |= 1;
+		ew32(GCR2, reg);
 	}
 
 	return;
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index f25e961..2d4ce04 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -206,6 +206,7 @@
 	E1000_MANC2H    = 0x05860, /* Management Control To Host - RW */
 	E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
 	E1000_GCR	= 0x05B00, /* PCI-Ex Control */
+	E1000_GCR2      = 0x05B64, /* PCI-Ex Control #2 */
 	E1000_FACTPS    = 0x05B30, /* Function Active and Power State to MNG */
 	E1000_SWSM      = 0x05B50, /* SW Semaphore */
 	E1000_FWSM      = 0x05B54, /* FW Semaphore */
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index ea53067..3f7eab4 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1423,15 +1423,11 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	struct vlan_group *old_grp;
 	u32 tempval;
 
 	spin_lock_irqsave(&priv->rxlock, flags);
 
-	old_grp = priv->vlgrp;
-
-	if (old_grp == grp)
-		return;
+	priv->vlgrp = grp;
 
 	if (grp) {
 		/* Enable VLAN tag insertion */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index acef3c6..d2f4d5f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -318,6 +318,9 @@
 		rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
 		rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
 		rx_ring->cpu = cpu;
 	}
@@ -1741,38 +1744,6 @@
 	IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
 }
 
-static void ixgbe_vlan_rx_register(struct net_device *netdev,
-                                   struct vlan_group *grp)
-{
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-	u32 ctrl;
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_disable(adapter);
-	adapter->vlgrp = grp;
-
-	/*
-	 * For a DCB driver, always enable VLAN tag stripping so we can
-	 * still receive traffic from a DCB-enabled host even if we're
-	 * not in DCB mode.
-	 */
-	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
-	ctrl |= IXGBE_VLNCTRL_VME;
-	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
-
-	if (grp) {
-		/* enable VLAN tag insert/strip */
-		ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
-		ctrl |= IXGBE_VLNCTRL_VME;
-		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
-	}
-
-	if (!test_bit(__IXGBE_DOWN, &adapter->state))
-		ixgbe_irq_enable(adapter);
-}
-
 static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
@@ -1799,6 +1770,39 @@
 	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
 }
 
+static void ixgbe_vlan_rx_register(struct net_device *netdev,
+                                   struct vlan_group *grp)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	u32 ctrl;
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_disable(adapter);
+	adapter->vlgrp = grp;
+
+	/*
+	 * For a DCB driver, always enable VLAN tag stripping so we can
+	 * still receive traffic from a DCB-enabled host even if we're
+	 * not in DCB mode.
+	 */
+	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+	ctrl |= IXGBE_VLNCTRL_VME;
+	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	ixgbe_vlan_rx_add_vid(netdev, 0);
+
+	if (grp) {
+		/* enable VLAN tag insert/strip */
+		ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+		ctrl |= IXGBE_VLNCTRL_VME;
+		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	}
+
+	if (!test_bit(__IXGBE_DOWN, &adapter->state))
+		ixgbe_irq_enable(adapter);
+}
+
 static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
 {
 	ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
@@ -2074,6 +2078,9 @@
 
 	ixgbe_irq_enable(adapter);
 
+	/* enable transmits */
+	netif_tx_start_all_queues(netdev);
+
 	/* bring the link up in the watchdog, this could race with our first
 	 * link up interrupt but shouldn't be a problem */
 	adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
@@ -3475,7 +3482,6 @@
 			        (FLOW_TX ? "TX" : "None"))));
 
 			netif_carrier_on(netdev);
-			netif_tx_wake_all_queues(netdev);
 		} else {
 			/* Force detection of hung controller */
 			adapter->detect_tx_hung = true;
@@ -3487,7 +3493,6 @@
 			printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
 			       netdev->name);
 			netif_carrier_off(netdev);
-			netif_tx_stop_all_queues(netdev);
 		}
 	}
 
@@ -4218,7 +4223,6 @@
 	}
 
 	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
 
 	strcpy(netdev->name, "eth%d");
 	err = register_netdev(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 83a11ff..f011c57 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -404,6 +404,9 @@
 #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
 #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
 #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
 
 #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
 #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 1d6e48e..75010ca 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -416,6 +416,9 @@
 			if (devcs & ETH_RX_MP)
 				dev->stats.multicast++;
 
+			/* 16 bit align */
+			skb_reserve(skb_new, 2);
+
 			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
 
@@ -740,6 +743,7 @@
 static void korina_alloc_ring(struct net_device *dev)
 {
 	struct korina_private *lp = netdev_priv(dev);
+	struct sk_buff *skb;
 	int i;
 
 	/* Initialize the transmit descriptors */
@@ -755,8 +759,6 @@
 
 	/* Initialize the receive descriptors */
 	for (i = 0; i < KORINA_NUM_RDS; i++) {
-		struct sk_buff *skb = lp->rx_skb[i];
-
 		skb = dev_alloc_skb(KORINA_RBSIZE + 2);
 		if (!skb)
 			break;
@@ -769,11 +771,12 @@
 		lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
 	}
 
-	/* loop back */
-	lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
-	lp->rx_next_done  = 0;
+	/* loop back receive descriptors, so the last
+	 * descriptor points to the first one */
+	lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
+	lp->rd_ring[i - 1].control |= DMA_DESC_COD;
 
-	lp->rd_ring[i].control |= DMA_DESC_COD;
+	lp->rx_next_done  = 0;
 	lp->rx_chain_head = 0;
 	lp->rx_chain_tail = 0;
 	lp->rx_chain_status = desc_empty;
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index a04da4e..f6c4936 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -321,6 +321,10 @@
 		printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
 			bp->dev->name);
 
+		/* Transfer ongoing, disable transmitter, to avoid confusion */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
+
 		head = bp->tx_head;
 
 		/*Mark all the buffer as used to avoid sending a lost buffer*/
@@ -343,6 +347,10 @@
 		}
 
 		bp->tx_head = bp->tx_tail = 0;
+
+		/* Enable the transmitter again */
+		if (status & MACB_BIT(TGO))
+			macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
 	}
 
 	if (!(status & MACB_BIT(COMP)))
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 7253a49..5f31bbb 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -136,21 +136,23 @@
 /*
  * SDMA configuration register.
  */
+#define RX_BURST_SIZE_4_64BIT		(2 << 1)
 #define RX_BURST_SIZE_16_64BIT		(4 << 1)
 #define BLM_RX_NO_SWAP			(1 << 4)
 #define BLM_TX_NO_SWAP			(1 << 5)
+#define TX_BURST_SIZE_4_64BIT		(2 << 22)
 #define TX_BURST_SIZE_16_64BIT		(4 << 22)
 
 #if defined(__BIG_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 TX_BURST_SIZE_4_64BIT)
 #elif defined(__LITTLE_ENDIAN)
 #define PORT_SDMA_CONFIG_DEFAULT_VALUE		\
-		(RX_BURST_SIZE_16_64BIT	|	\
-		BLM_RX_NO_SWAP		|	\
-		BLM_TX_NO_SWAP		|	\
-		TX_BURST_SIZE_16_64BIT)
+		(RX_BURST_SIZE_4_64BIT	|	\
+		 BLM_RX_NO_SWAP		|	\
+		 BLM_TX_NO_SWAP		|	\
+		 TX_BURST_SIZE_4_64BIT)
 #else
 #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
 #endif
@@ -1594,7 +1596,7 @@
 			entry = addr_crc(a);
 		}
 
-		table[entry >> 2] |= 1 << (entry & 3);
+		table[entry >> 2] |= 1 << (8 * (entry & 3));
 	}
 
 	for (i = 0; i < 0x100; i += 4) {
@@ -2210,6 +2212,7 @@
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	int i;
 
+	wrlp(mp, INT_MASK_EXT, 0x00000000);
 	wrlp(mp, INT_MASK, 0x00000000);
 	rdlp(mp, INT_MASK);
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 6bb71b6..e9c1296 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1,7 +1,7 @@
 /*************************************************************************
  * myri10ge.c: Myricom Myri-10G Ethernet driver.
  *
- * Copyright (C) 2005 - 2007 Myricom, Inc.
+ * Copyright (C) 2005 - 2009 Myricom, Inc.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.4-1.398"
+#define MYRI10GE_VERSION_STR "1.4.4-1.401"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -3786,7 +3786,7 @@
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
 			status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 
 	pci_set_master(pdev);
@@ -3801,13 +3801,13 @@
 	}
 	if (status != 0) {
 		dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 	}
 	(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
 	mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
 				      &mgp->cmd_bus, GFP_KERNEL);
 	if (mgp->cmd == NULL)
-		goto abort_with_netdev;
+		goto abort_with_enabled;
 
 	mgp->board_span = pci_resource_len(pdev, 0);
 	mgp->iomem_base = pci_resource_start(pdev, 0);
@@ -3943,8 +3943,10 @@
 	dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
 			  mgp->cmd, mgp->cmd_bus);
 
-abort_with_netdev:
+abort_with_enabled:
+	pci_disable_device(pdev);
 
+abort_with_netdev:
 	free_netdev(netdev);
 	return status;
 }
@@ -3990,6 +3992,7 @@
 			  mgp->cmd, mgp->cmd_bus);
 
 	free_netdev(netdev);
+	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
 
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index c11c568..a75a310 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -146,7 +146,7 @@
 
 #define MAX_RX_BUFFER_LENGTH		1760
 #define MAX_RX_JUMBO_BUFFER_LENGTH 	8062
-#define MAX_RX_LRO_BUFFER_LENGTH	((48*1024)-512)
+#define MAX_RX_LRO_BUFFER_LENGTH	(8062)
 #define RX_DMA_MAP_LEN			(MAX_RX_BUFFER_LENGTH - 2)
 #define RX_JUMBO_DMA_MAP_LEN	\
 	(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
@@ -207,11 +207,11 @@
 
 #define MAX_CMD_DESCRIPTORS		4096
 #define MAX_RCV_DESCRIPTORS		16384
-#define MAX_CMD_DESCRIPTORS_HOST	(MAX_CMD_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_1G		(MAX_RCV_DESCRIPTORS / 4)
-#define MAX_RCV_DESCRIPTORS_10G		8192
-#define MAX_JUMBO_RCV_DESCRIPTORS	1024
-#define MAX_LRO_RCV_DESCRIPTORS		64
+#define MAX_CMD_DESCRIPTORS_HOST	1024
+#define MAX_RCV_DESCRIPTORS_1G		2048
+#define MAX_RCV_DESCRIPTORS_10G		4096
+#define MAX_JUMBO_RCV_DESCRIPTORS	512
+#define MAX_LRO_RCV_DESCRIPTORS		8
 #define MAX_RCVSTATUS_DESCRIPTORS	MAX_RCV_DESCRIPTORS
 #define MAX_JUMBO_RCV_DESC	MAX_JUMBO_RCV_DESCRIPTORS
 #define MAX_RCV_DESC		MAX_RCV_DESCRIPTORS
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index c0bd40f..0894a7b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -561,7 +561,10 @@
 	}
 	ring->tx_pending = adapter->max_tx_desc_count;
 
-	ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE)
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
+	else
+		ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
 	ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
 	ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
 	ring->rx_mini_max_pending = 0;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index d854f07..645d384 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -735,17 +735,18 @@
 
 	SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
 
-	/* ScatterGather support */
-	netdev->features = NETIF_F_SG;
-	netdev->features |= NETIF_F_IP_CSUM;
-	netdev->features |= NETIF_F_TSO;
+	netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+	netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
+
 	if (NX_IS_REVISION_P3(revision_id)) {
-		netdev->features |= NETIF_F_IPV6_CSUM;
-		netdev->features |= NETIF_F_TSO6;
+		netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+		netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
 	}
 
-	if (adapter->pci_using_dac)
+	if (adapter->pci_using_dac) {
 		netdev->features |= NETIF_F_HIGHDMA;
+		netdev->vlan_features |= NETIF_F_HIGHDMA;
+	}
 
 	/*
 	 * Set the CRB window to invalid. If any register in window 0 is
@@ -1166,6 +1167,14 @@
 {
 	bool tso = false;
 	u8 opcode = TX_ETHER_PKT;
+	__be16 protocol = skb->protocol;
+	u16 flags = 0;
+
+	if (protocol == __constant_htons(ETH_P_8021Q)) {
+		struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
+		protocol = vh->h_vlan_encapsulated_proto;
+		flags = FLAGS_VLAN_TAGGED;
+	}
 
 	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
 			skb_shinfo(skb)->gso_size > 0) {
@@ -1174,21 +1183,21 @@
 		desc->total_hdr_length =
 			skb_transport_offset(skb) + tcp_hdrlen(skb);
 
-		opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+		opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
 				TX_TCP_LSO6 : TX_TCP_LSO;
 		tso = true;
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		u8 l4proto;
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (protocol == __constant_htons(ETH_P_IP)) {
 			l4proto = ip_hdr(skb)->protocol;
 
 			if (l4proto == IPPROTO_TCP)
 				opcode = TX_TCP_PKT;
 			else if(l4proto == IPPROTO_UDP)
 				opcode = TX_UDP_PKT;
-		} else if (skb->protocol == htons(ETH_P_IPV6)) {
+		} else if (protocol == __constant_htons(ETH_P_IPV6)) {
 			l4proto = ipv6_hdr(skb)->nexthdr;
 
 			if (l4proto == IPPROTO_TCP)
@@ -1199,7 +1208,7 @@
 	}
 	desc->tcp_hdr_offset = skb_transport_offset(skb);
 	desc->ip_hdr_offset = skb_network_offset(skb);
-	netxen_set_tx_flags_opcode(desc, 0, opcode);
+	netxen_set_tx_flags_opcode(desc, flags, opcode);
 	return tso;
 }
 
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 11adf6e..811a63769 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -296,9 +296,8 @@
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->suspend))
-			ret = phydrv->suspend(phydev);
+	if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
+		ret = phydrv->suspend(phydev);
 
 	return ret;
 }
@@ -310,8 +309,7 @@
 	struct phy_driver *phydrv = to_phy_driver(drv);
 	struct phy_device *phydev = to_phy_device(dev);
 
-	if ((!device_may_wakeup(phydev->dev.parent)) &&
-		(phydrv && phydrv->resume))
+	if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
 		ret = phydrv->resume(phydev);
 
 	return ret;
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c05d38d..1387187 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -81,6 +81,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -102,6 +105,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -123,6 +129,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
@@ -144,6 +153,9 @@
 	.ack_interrupt	= smsc_phy_ack_interrupt,
 	.config_intr	= smsc_phy_config_intr,
 
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+
 	.driver		= { .owner = THIS_MODULE, }
 };
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 5e2dbae..8b3f846 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7535,11 +7535,58 @@
 	return err;
 }
 
+static int tg3_request_firmware(struct tg3 *tp)
+{
+	const __be32 *fw_data;
+
+	if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
+		printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
+		       tp->dev->name, tp->fw_needed);
+		return -ENOENT;
+	}
+
+	fw_data = (void *)tp->fw->data;
+
+	/* Firmware blob starts with version numbers, followed by
+	 * start address and _full_ length including BSS sections
+	 * (which must be longer than the actual data, of course
+	 */
+
+	tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
+	if (tp->fw_len < (tp->fw->size - 12)) {
+		printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
+		       tp->dev->name, tp->fw_len, tp->fw_needed);
+		release_firmware(tp->fw);
+		tp->fw = NULL;
+		return -EINVAL;
+	}
+
+	/* We no longer need firmware; we have it. */
+	tp->fw_needed = NULL;
+	return 0;
+}
+
 static int tg3_open(struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	int err;
 
+	if (tp->fw_needed) {
+		err = tg3_request_firmware(tp);
+		if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
+			if (err)
+				return err;
+		} else if (err) {
+			printk(KERN_WARNING "%s: TSO capability disabled.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+		} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
+			printk(KERN_NOTICE "%s: TSO capability restored.\n",
+			       tp->dev->name);
+			tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+		}
+	}
+
 	netif_carrier_off(tp->dev);
 
 	err = tg3_set_power_state(tp, PCI_D0);
@@ -12934,7 +12981,6 @@
 	struct net_device *dev;
 	struct tg3 *tp;
 	int err, pm_cap;
-	const char *fw_name = NULL;
 	char str[40];
 	u64 dma_mask, persist_dma_mask;
 
@@ -13091,7 +13137,7 @@
 	tg3_init_bufmgr_config(tp);
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
-		fw_name = FIRMWARE_TG3;
+		tp->fw_needed = FIRMWARE_TG3;
 
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
@@ -13104,37 +13150,10 @@
 		tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
 	} else {
 		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
-	}
-	if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
-			fw_name = FIRMWARE_TG3TSO5;
+			tp->fw_needed = FIRMWARE_TG3TSO5;
 		else
-			fw_name = FIRMWARE_TG3TSO;
-	}
-
-	if (fw_name) {
-		const __be32 *fw_data;
-
-		err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev);
-		if (err) {
-			printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n",
-			       fw_name);
-			goto err_out_iounmap;
-		}
-
-		fw_data = (void *)tp->fw->data;
-
-		/* Firmware blob starts with version numbers, followed by
-		   start address and _full_ length including BSS sections
-		   (which must be longer than the actual data, of course */
-
-		tp->fw_len = be32_to_cpu(fw_data[2]);	/* includes bss */
-		if (tp->fw_len < (tp->fw->size - 12)) {
-			printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n",
-			       tp->fw_len, fw_name);
-			err = -EINVAL;
-			goto err_out_fw;
-		}
+			tp->fw_needed = FIRMWARE_TG3TSO;
 	}
 
 	/* TSO is on by default on chips that support hardware TSO.
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index ae5da60..508def3 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2764,6 +2764,7 @@
 	struct ethtool_coalesce		coal;
 
 	/* firmware info */
+	const char			*fw_needed;
 	const struct firmware		*fw;
 	u32				fw_len; /* includes BSS */
 };
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 5385d66..ced8f36e 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -94,10 +94,18 @@
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
 
 	ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
-			      MCS7830_RD_BMREQ, 0x0000, index, data,
+			      MCS7830_RD_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	memcpy(data, buffer, size);
+	kfree(buffer);
+
 	return ret;
 }
 
@@ -105,10 +113,18 @@
 {
 	struct usb_device *xdev = dev->udev;
 	int ret;
+	void *buffer;
+
+	buffer = kmalloc(size, GFP_NOIO);
+	if (buffer == NULL)
+		return -ENOMEM;
+
+	memcpy(buffer, data, size);
 
 	ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
-			      MCS7830_WR_BMREQ, 0x0000, index, data,
+			      MCS7830_WR_BMREQ, 0x0000, index, buffer,
 			      size, MCS7830_CTRL_TIMEOUT);
+	kfree(buffer);
 	return ret;
 }
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index a75f91d..c5691fd 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1302,7 +1302,7 @@
 static int velocity_init_td_ring(struct velocity_info *vptr)
 {
 	dma_addr_t curr;
-	unsigned int j;
+	int j;
 
 	/* Init the TD ring entries */
 	for (j = 0; j < vptr->tx.numq; j++) {
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 43f6523c..63ef2a8 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -24,6 +24,7 @@
 #include <linux/virtio.h>
 #include <linux/virtio_net.h>
 #include <linux/scatterlist.h>
+#include <linux/if_vlan.h>
 
 static int napi_weight = 128;
 module_param(napi_weight, int, 0444);
@@ -33,7 +34,7 @@
 module_param(gso, bool, 0444);
 
 /* FIXME: MTU in config. */
-#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
+#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
 #define GOOD_COPY_LEN	128
 
 struct virtnet_info
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index d3d37fe..15d9f51 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -609,7 +609,7 @@
 	spin_lock_irqsave(&i2400m->rx_lock, flags);
 	ack_skb = i2400m->ack_skb;
 	if (ack_skb && !IS_ERR(ack_skb))
-		kfree(ack_skb);
+		kfree_skb(ack_skb);
 	i2400m->ack_skb = ERR_PTR(code);
 	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 }
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index 074cc1f..a314799 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -184,6 +184,8 @@
  *   NOTE: this function might realloc the skb (if it is too small),
  *   so always update with the one returned.
  *   ERR_PTR() is < 0 on error.
+ *   Will return NULL if it cannot reallocate -- this can be
+ *   considered a transient retryable error.
  */
 static
 struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
@@ -243,8 +245,8 @@
 			if (printk_ratelimit())
 				dev_err(dev, "RX: Can't reallocate skb to %d; "
 					"RX dropped\n", rx_size);
-			kfree(rx_skb);
-			result = 0;
+			kfree_skb(rx_skb);
+			rx_skb = NULL;
 			goto out;	/* drop it...*/
 		}
 		kfree_skb(rx_skb);
@@ -344,7 +346,8 @@
 		if (IS_ERR(rx_skb))
 			goto out;
 		atomic_dec(&i2400mu->rx_pending_count);
-		if (rx_skb->len == 0) {	/* some ignorable condition */
+		if (rx_skb == NULL || rx_skb->len == 0) {
+			/* some "ignorable" condition */
 			kfree_skb(rx_skb);
 			continue;
 		}
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 04ab457..1b71b93 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -490,7 +490,7 @@
 
 static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
 {
-	if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
+	if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
 		return 0;
 	if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
 		return 0;
diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h
index 9112c03..6df1b3b 100644
--- a/drivers/net/wireless/ath9k/regd_common.h
+++ b/drivers/net/wireless/ath9k/regd_common.h
@@ -228,7 +228,7 @@
 };
 
 #define REG_DOMAIN_2GHZ_MASK    (REQ_MASK & \
-	(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
+	(~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
 #define REG_DOMAIN_5GHZ_MASK    REQ_MASK
 
 static struct reg_dmn_pair_mapping regDomainPairs[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index 9b60a0c..21c8418 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -638,12 +638,16 @@
 	s8 scale_action = 0;
 	unsigned long flags;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	u16 fc, rate_mask;
+	u16 fc;
+	u16 rate_mask = 0;
 	struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	IWL_DEBUG_RATE("enter\n");
 
+	if (sta)
+		rate_mask = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	fc = le16_to_cpu(hdr->frame_control);
@@ -651,11 +655,15 @@
 	    is_multicast_ether_addr(hdr->addr1) ||
 	    !sta || !priv_sta) {
 		IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!rate_mask)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
-	rate_mask = sta->supp_rates[sband->band];
 	index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
 
 	if (sband->band == IEEE80211_BAND_5GHZ)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index f3f1792..27f5047 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -944,7 +944,8 @@
 	}
 
 	/* See if there's a better rate or modulation mode to try. */
-	rs_rate_scale_perform(priv, hdr, sta, lq_sta);
+	if (sta && sta->supp_rates[sband->band])
+		rs_rate_scale_perform(priv, hdr, sta, lq_sta);
 out:
 	return;
 }
@@ -2101,14 +2102,23 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	int rate_idx;
+	u64 mask_bit = 0;
 
 	IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
 
+	if (sta)
+		mask_bit = sta->supp_rates[sband->band];
+
 	/* Send management frames and broadcast/multicast data using lowest
 	 * rate. */
 	if (!ieee80211_is_data(hdr->frame_control) ||
 	    is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
-		info->control.rates[0].idx = rate_lowest_index(sband, sta);
+		if (!mask_bit)
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, NULL);
+		else
+			info->control.rates[0].idx =
+					rate_lowest_index(sband, sta);
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5da6b35..0dc8eed 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2482,7 +2482,7 @@
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MACDUMP("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 8c71ad4..4b35b30 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -224,7 +224,7 @@
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d645808..95d0198 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -745,7 +745,7 @@
 		IWL_ERROR("Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
-		goto out;
+		goto cancel;
 	}
 
 	ret = 0;
@@ -6538,7 +6538,7 @@
 		dev_kfree_skb_any(skb);
 
 	IWL_DEBUG_MAC80211("leave\n");
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
index e173b1b..f6a79a6 100644
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ b/drivers/net/wireless/libertas/hostcmd.h
@@ -32,7 +32,7 @@
 	u8 pktdelay_2ms;
 	/* reserved */
 	u8 reserved1;
-};
+} __attribute__ ((packed));
 
 /* RxPD Descriptor */
 struct rxpd {
@@ -63,7 +63,7 @@
 	/* Pkt Priority */
 	u8 priority;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_header {
 	__le16 command;
@@ -97,7 +97,7 @@
 struct lbs_offset_value {
 	u32 offset;
 	u32 value;
-};
+} __attribute__ ((packed));
 
 /* Define general data structure */
 /* cmd_DS_GEN */
@@ -107,7 +107,7 @@
 	__le16 seqnum;
 	__le16 result;
 	void *cmdresp[0];
-};
+} __attribute__ ((packed));
 
 #define S_DS_GEN sizeof(struct cmd_ds_gen)
 
@@ -163,7 +163,7 @@
 	 * bump this up a bit.
 	 */
 	uint8_t tlv[128];
-};
+} __attribute__ ((packed));
 
 /*
  * This scan handle Country Information IE(802.11d compliant)
@@ -180,7 +180,7 @@
 	mrvlietypes_chanlistparamset_t ChanListParamSet;
 	mrvlietypes_ratesparamset_t OpRateSet;
 #endif
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_scan_rsp {
 	struct cmd_header hdr;
@@ -188,7 +188,7 @@
 	__le16 bssdescriptsize;
 	uint8_t nr_sets;
 	uint8_t bssdesc_and_tlvbuffer[0];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_log {
 	struct cmd_header hdr;
@@ -206,33 +206,33 @@
 	__le32 fcserror;
 	__le32 txframe;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_control {
 	struct cmd_header hdr;
 	__le16 action;
 	u16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_multicast_adr {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 nr_of_adrs;
 	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_authenticate {
 	u8 macaddr[ETH_ALEN];
 	u8 authtype;
 	u8 reserved[10];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_deauthenticate {
 	struct cmd_header hdr;
 
 	u8 macaddr[ETH_ALEN];
 	__le16 reasoncode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_associate {
 	u8 peerstaaddr[6];
@@ -251,7 +251,7 @@
 
 struct cmd_ds_802_11_associate_rsp {
 	struct ieeetypes_assocrsp assocRsp;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_set_wep {
 	struct cmd_header hdr;
@@ -265,7 +265,7 @@
 	/* 40, 128bit or TXWEP */
 	uint8_t keytype[4];
 	uint8_t keymaterial[4][16];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_3_get_stat {
 	__le32 xmitok;
@@ -274,7 +274,7 @@
 	__le32 rcverror;
 	__le32 rcvnobuffer;
 	__le32 rcvcrcerror;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_get_stat {
 	__le32 txfragmentcnt;
@@ -294,7 +294,7 @@
 	__le32 txbeacon;
 	__le32 rxbeacon;
 	__le32 wepundecryptable;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_snmp_mib {
 	struct cmd_header hdr;
@@ -303,58 +303,58 @@
 	__le16 oid;
 	__le16 bufsize;
 	u8 value[128];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_map {
 	__le16 buffersize;
 	u8 regmap[128];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_map {
 	__le16 buffersize;
 	u8 regmap[64];
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_mac_reg_access {
 	__le16 action;
 	__le16 offset;
 	__le32 value;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_bbp_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_rf_reg_access {
 	__le16 action;
 	__le16 offset;
 	u8 value;
 	u8 reserved[3];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_radio_control {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 control;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_beacon_control {
 	__le16 action;
 	__le16 beacon_enable;
 	__le16 beacon_period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_params {
 	struct cmd_header hdr;
@@ -379,7 +379,7 @@
 
 	/* reserved field, should be set to zero */
 	__le16 reserved;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_inactivity_timeout {
 	struct cmd_header hdr;
@@ -389,7 +389,7 @@
 
 	/* Inactivity timeout in msec */
 	__le16 timeout;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_channel {
 	struct cmd_header hdr;
@@ -399,7 +399,7 @@
 	__le16 rftype;      /* unused */
 	__le16 reserved;    /* unused */
 	u8 channellist[32]; /* unused */
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi {
 	/* weighting factor */
@@ -408,21 +408,21 @@
 	__le16 reserved_0;
 	__le16 reserved_1;
 	__le16 reserved_2;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rssi_rsp {
 	__le16 SNR;
 	__le16 noisefloor;
 	__le16 avgSNR;
 	__le16 avgnoisefloor;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_mac_address {
 	struct cmd_header hdr;
 
 	__le16 action;
 	u8 macadd[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_tx_power {
 	struct cmd_header hdr;
@@ -431,7 +431,7 @@
 	__le16 curlevel;
 	s8 maxlevel;
 	s8 minlevel;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rf_antenna {
 	__le16 action;
@@ -439,33 +439,33 @@
 	/* Number of antennas or 0xffff(diversity) */
 	__le16 antennamode;
 
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_monitor_mode {
 	__le16 action;
 	__le16 mode;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_set_boot2_ver {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 version;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_fw_wake_method {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 method;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_sleep_period {
 	struct cmd_header hdr;
 
 	__le16 action;
 	__le16 period;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ps_mode {
 	__le16 action;
@@ -473,7 +473,7 @@
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_confirm_sleep {
 	struct cmd_header hdr;
@@ -483,7 +483,7 @@
 	__le16 multipledtim;
 	__le16 reserved;
 	__le16 locallisteninterval;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_data_rate {
 	struct cmd_header hdr;
@@ -491,14 +491,14 @@
 	__le16 action;
 	__le16 reserved;
 	u8 rates[MAX_RATES];
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_rate_adapt_rateset {
 	struct cmd_header hdr;
 	__le16 action;
 	__le16 enablehwauto;
 	__le16 bitmap;
-};
+} __attribute__ ((packed));
 
 struct cmd_ds_802_11_ad_hoc_start {
 	struct cmd_header hdr;
@@ -520,7 +520,7 @@
 
 	u8 pad[3];
 	u8 bssid[ETH_ALEN];
-};
+} __attribute__ ((packed));
 
 struct adhoc_bssdesc {
 	u8 bssid[ETH_ALEN];
@@ -578,7 +578,7 @@
 
 	/* key material of size keylen */
 	u8 key[32];
-};
+} __attribute__ ((packed));
 
 #define MAX_WOL_RULES 		16
 
@@ -590,7 +590,7 @@
 	__le16 reserve;
 	__be32 sig_mask;
 	__be32 signature;
-};
+} __attribute__ ((packed));
 
 struct wol_config {
 	uint8_t action;
@@ -598,8 +598,7 @@
 	uint8_t no_rules_in_cmd;
 	uint8_t result;
 	struct host_wol_rule rule[MAX_WOL_RULES];
-};
-
+} __attribute__ ((packed));
 
 struct cmd_ds_host_sleep {
 	struct cmd_header hdr;
diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index c3bb85e..45a04fa 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1673,7 +1673,7 @@
 		s = "UNKNOWN";
 	}
 	
-	printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+	printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
 	       dev->name, s, status);
 }
 
@@ -5068,33 +5068,30 @@
 	struct orinoco_private *priv = netdev_priv(dev);
 	u8 *buf;
 	unsigned long flags;
-	int err = 0;
 
 	/* cut off at IEEE80211_MAX_DATA_LEN */
 	if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
 	    (wrqu->data.length && (extra == NULL)))
 		return -EINVAL;
 
-	if (orinoco_lock(priv, &flags) != 0)
-		return -EBUSY;
-
 	if (wrqu->data.length) {
 		buf = kmalloc(wrqu->data.length, GFP_KERNEL);
-		if (buf == NULL) {
-			err = -ENOMEM;
-			goto out;
-		}
+		if (buf == NULL)
+			return -ENOMEM;
 
 		memcpy(buf, extra, wrqu->data.length);
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = buf;
-		priv->wpa_ie_len = wrqu->data.length;
-	} else {
-		kfree(priv->wpa_ie);
-		priv->wpa_ie = NULL;
-		priv->wpa_ie_len = 0;
+	} else
+		buf = NULL;
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		kfree(buf);
+		return -EBUSY;
 	}
 
+	kfree(priv->wpa_ie);
+	priv->wpa_ie = buf;
+	priv->wpa_ie_len = wrqu->data.length;
+
 	if (priv->wpa_ie) {
 		/* Looks like wl_lkm wants to check the auth alg, and
 		 * somehow pass it to the firmware.
@@ -5103,9 +5100,8 @@
 		 */
 	}
 
-out:
 	orinoco_unlock(priv, &flags);
-	return err;
+	return 0;
 }
 
 static int orinoco_ioctl_get_genie(struct net_device *dev,
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index c6a370f..34561e6 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -451,8 +451,8 @@
 			}
 			if (err)
 				goto err;
-
-		}
+			}
+			break;
 		case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
 			priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
 			if (!priv->iq_autocal) {
@@ -745,7 +745,7 @@
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
 		struct p54_tx_data *entry_data;
-		int pad = 0;
+		unsigned int pad = 0, frame_len;
 
 		range = (void *)info->rate_driver_data;
 		if (range->start_addr != addr) {
@@ -768,6 +768,7 @@
 		__skb_unlink(entry, &priv->tx_queue);
 		spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
+		frame_len = entry->len;
 		entry_hdr = (struct p54_hdr *) entry->data;
 		entry_data = (struct p54_tx_data *) entry_hdr->data;
 		priv->tx_stats[entry_data->hw_queue].len--;
@@ -814,15 +815,28 @@
 		info->status.ack_signal = p54_rssi_to_dbm(dev,
 				(int)payload->ack_rssi);
 
-		if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+		/* Undo all changes to the frame. */
+		switch (entry_data->key_type) {
+		case P54_CRYPTO_TKIPMICHAEL: {
 			u8 *iv = (u8 *)(entry_data->align + pad +
-				        entry_data->crypt_offset);
+					entry_data->crypt_offset);
 
 			/* Restore the original TKIP IV. */
 			iv[2] = iv[0];
 			iv[0] = iv[1];
 			iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */
+
+			frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
+			break;
+			}
+		case P54_CRYPTO_AESCCMP:
+			frame_len -= 8; /* remove CCMP_MIC */
+			break;
+		case P54_CRYPTO_WEP:
+			frame_len -= 4; /* remove WEP_ICV */
+			break;
 		}
+		skb_trim(entry, frame_len);
 		skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 		ieee80211_tx_status_irqsafe(dev, entry);
 		goto out;
@@ -1147,7 +1161,7 @@
 
 	skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET,
 		      sizeof(struct p54_hdr) + sizeof(*tim),
-		      P54_CONTROL_TYPE_TIM, GFP_KERNEL);
+		      P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
 	if (!skb)
 		return -ENOMEM;
 
@@ -1610,7 +1624,7 @@
 
  err:
 	printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
-	kfree_skb(skb);
+	p54_free_skb(dev, skb);
 	return -EINVAL;
 }
 
@@ -2077,7 +2091,7 @@
 			algo = P54_CRYPTO_AESCCMP;
 			break;
 		default:
-			return -EINVAL;
+			return -EOPNOTSUPP;
 		}
 	}
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 6a6a72f..5de2ebf 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -144,11 +144,8 @@
 	struct sk_buff *skb = urb->context;
 	struct ieee80211_hw *dev = (struct ieee80211_hw *)
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
-	struct p54u_priv *priv = dev->priv;
 
-	skb_pull(skb, priv->common.tx_hdr_len);
-	if (FREE_AFTER_TX(skb))
-		p54_free_skb(dev, skb);
+	p54_free_skb(dev, skb);
 }
 
 static void p54u_tx_dummy_cb(struct urb *urb) { }
@@ -230,7 +227,10 @@
 			  p54u_tx_dummy_cb, dev);
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  skb->data, skb->len, FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	addr_urb->transfer_flags |= URB_ZERO_PACKET;
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(addr_urb, &priv->submitted);
 	err = usb_submit_urb(addr_urb, GFP_ATOMIC);
@@ -239,7 +239,7 @@
 		goto out;
 	}
 
-	usb_anchor_urb(addr_urb, &priv->submitted);
+	usb_anchor_urb(data_urb, &priv->submitted);
 	err = usb_submit_urb(data_urb, GFP_ATOMIC);
 	if (err)
 		usb_unanchor_urb(data_urb);
@@ -269,28 +269,24 @@
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *data_urb;
-	struct lm87_tx_hdr *hdr;
-	__le32 checksum;
-	__le32 addr = ((struct p54_hdr *)skb->data)->req_id;
+	struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 
 	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!data_urb)
 		return;
 
-	checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
-	hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
-	hdr->chksum = checksum;
-	hdr->device_addr = addr;
+	hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
+	hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr),  FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
 	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(data_urb, &priv->submitted);
 	if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
 		usb_unanchor_urb(data_urb);
-		skb_pull(skb, sizeof(*hdr));
 		p54_free_skb(dev, skb);
 	}
 	usb_free_urb(data_urb);
@@ -300,11 +296,9 @@
 {
 	struct p54u_priv *priv = dev->priv;
 	struct urb *int_urb, *data_urb;
-	struct net2280_tx_hdr *hdr;
+	struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
 	struct net2280_reg_write *reg;
 	int err = 0;
-	__le32 addr = ((struct p54_hdr *) skb->data)->req_id;
-	__le16 len = cpu_to_le16(skb->len);
 
 	reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
 	if (!reg)
@@ -327,10 +321,9 @@
 	reg->addr = cpu_to_le32(P54U_DEV_BASE);
 	reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
 
-	hdr = (void *)skb_push(skb, sizeof(*hdr));
 	memset(hdr, 0, sizeof(*hdr));
-	hdr->len = len;
-	hdr->device_addr = addr;
+	hdr->len = cpu_to_le16(skb->len);
+	hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
 
 	usb_fill_bulk_urb(int_urb, priv->udev,
 		usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
@@ -341,11 +334,13 @@
 	 * free what's inside the transfer_buffer after the callback routine
 	 * has completed.
 	 */
-	int_urb->transfer_flags |= URB_FREE_BUFFER;
+	int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
 
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
-			  skb->data, skb->len, p54u_tx_cb, skb);
+			  hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
+			  p54u_tx_cb : p54u_tx_dummy_cb, skb);
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(int_urb, &priv->submitted);
 	err = usb_submit_urb(int_urb, GFP_ATOMIC);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 607ce9f..ed93ac4 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -1649,9 +1649,7 @@
 				  char *end_buf,
 				  struct ndis_80211_bssid_ex *bssid)
 {
-#ifdef DEBUG
 	struct usbnet *usbdev = netdev_priv(dev);
-#endif
 	u8 *ie;
 	char *current_val;
 	int bssid_len, ie_len, i;
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 746a8f3..0709dec 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -154,6 +154,7 @@
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
+	struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
 	struct ieee80211_rate *rate =
 	    ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
 	const struct rt2x00_rate *hwrate;
@@ -313,7 +314,7 @@
 		 * When preamble is enabled we should set the
 		 * preamble bit for the signal.
 		 */
-		if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			txdesc->signal |= 0x08;
 	}
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
index c3f53a9..3298cae 100644
--- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c
+++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c
@@ -162,7 +162,7 @@
 
 void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
 {
-	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
+	if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
 		return;
 
 	cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 6ad6bac..22bc07e 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -273,6 +273,7 @@
 
 	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
 			  buf, skb->len, rtl8187_tx_cb, skb);
+	urb->transfer_flags |= URB_ZERO_PACKET;
 	usb_anchor_urb(urb, &priv->anchored);
 	rc = usb_submit_urb(urb, GFP_ATOMIC);
 	if (rc < 0) {
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index b5db57d..17527f7 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -84,6 +84,7 @@
 	{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2e03b6d..e76d715 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -393,16 +393,21 @@
 	return;
 
 fail:
+	entry->event = NULL;
 	cpu_buf->sample_lost_overflow++;
 }
 
 int oprofile_add_data(struct op_entry *entry, unsigned long val)
 {
+	if (!entry->event)
+		return 0;
 	return op_cpu_buffer_add_data(entry, val);
 }
 
 int oprofile_write_commit(struct op_entry *entry)
 {
+	if (!entry->event)
+		return -EINVAL;
 	return op_cpu_buffer_write_commit(entry);
 }
 
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 63f81c4..272995d 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -66,6 +66,13 @@
 	cpu_buf->last_task = NULL;
 }
 
+/*
+ * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be
+ * called only if op_cpu_buffer_write_reserve() did not return NULL or
+ * entry->event != NULL, otherwise entry->size or entry->event will be
+ * used uninitialized.
+ */
+
 struct op_sample
 *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size);
 int op_cpu_buffer_write_commit(struct op_entry *entry);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 5482d4e..c248554 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -126,8 +126,10 @@
 	mutex_lock(&slot->ctrl->crit_sect);
 
 	/* has it been >1 sec since our last toggle? */
-	if ((get_seconds() - slot->last_emi_toggle) < 1)
+	if ((get_seconds() - slot->last_emi_toggle) < 1) {
+		mutex_unlock(&slot->ctrl->crit_sect);
 		return -EINVAL;
+	}
 
 	/* see what our current state is */
 	retval = get_lock_status(hotplug_slot, &value);
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b4a90ba..896a15d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -398,21 +398,19 @@
 	entry->msi_attrib.masked = 1;
 	entry->msi_attrib.default_irq = dev->irq;	/* Save IOAPIC IRQ */
 	entry->msi_attrib.pos = pos;
-	if (entry->msi_attrib.maskbit) {
-		entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
-				entry->msi_attrib.is_64);
-	}
 	entry->dev = dev;
 	if (entry->msi_attrib.maskbit) {
-		unsigned int maskbits, temp;
+		unsigned int base, maskbits, temp;
+
+		base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64);
+		entry->mask_base = (void __iomem *)(long)base;
+
 		/* All MSIs are unmasked by default, Mask them all */
-		pci_read_config_dword(dev,
-			msi_mask_bits_reg(pos, entry->msi_attrib.is_64),
-			&maskbits);
+		pci_read_config_dword(dev, base, &maskbits);
 		temp = (1 << multi_msi_capable(control));
 		temp = ((temp - 1) & ~temp);
 		maskbits |= temp;
-		pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits);
+		pci_write_config_dword(dev, base, maskbits);
 		entry->msi_attrib.maskbits_mask = temp;
 	}
 	list_add_tail(&entry->list, &dev->msi_list);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index c697f26..9de07b7 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -355,17 +355,27 @@
 	int i = 0;
 
 	if (drv && drv->suspend) {
+		pci_dev->state_saved = false;
+
 		i = drv->suspend(pci_dev, state);
 		suspend_report_result(drv->suspend, i);
-	} else {
-		pci_save_state(pci_dev);
-		/*
-		 * This is for compatibility with existing code with legacy PM
-		 * support.
-		 */
-		pci_pm_set_unknown_state(pci_dev);
+		if (i)
+			return i;
+
+		if (pci_dev->state_saved)
+			goto Fixup;
+
+		if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
+			goto Fixup;
 	}
 
+	pci_save_state(pci_dev);
+	/*
+	 * This is for compatibility with existing code with legacy PM support.
+	 */
+	pci_pm_set_unknown_state(pci_dev);
+
+ Fixup:
 	pci_fixup_device(pci_fixup_suspend, pci_dev);
 
 	return i;
@@ -386,81 +396,34 @@
 
 static int pci_legacy_resume_early(struct device *dev)
 {
-	int error = 0;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
-	pci_fixup_device(pci_fixup_resume_early, pci_dev);
-
-	if (drv && drv->resume_early)
-		error = drv->resume_early(pci_dev);
-	return error;
+	return drv && drv->resume_early ?
+			drv->resume_early(pci_dev) : 0;
 }
 
 static int pci_legacy_resume(struct device *dev)
 {
-	int error;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
-	if (drv && drv->resume) {
-		error = drv->resume(pci_dev);
-	} else {
-		/* restore the PCI config space */
-		pci_restore_state(pci_dev);
-		error = pci_pm_reenable_device(pci_dev);
-	}
-	return error;
+	return drv && drv->resume ?
+			drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev);
 }
 
 /* Auxiliary functions used by the new power management framework */
 
-static int pci_restore_standard_config(struct pci_dev *pci_dev)
-{
-	struct pci_dev *parent = pci_dev->bus->self;
-	int error = 0;
-
-	/* Check if the device's bus is operational */
-	if (!parent || parent->current_state == PCI_D0) {
-		pci_restore_state(pci_dev);
-		pci_update_current_state(pci_dev, PCI_D0);
-	} else {
-		dev_warn(&pci_dev->dev, "unable to restore config, "
-			"bridge %s in low power state D%d\n", pci_name(parent),
-			parent->current_state);
-		pci_dev->current_state = PCI_UNKNOWN;
-		error = -EAGAIN;
-	}
-
-	return error;
-}
-
-static bool pci_is_bridge(struct pci_dev *pci_dev)
-{
-	return !!(pci_dev->subordinate);
-}
-
 static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
 {
-	if (pci_restore_standard_config(pci_dev))
-		pci_fixup_device(pci_fixup_resume_early, pci_dev);
+	pci_restore_standard_config(pci_dev);
+	pci_fixup_device(pci_fixup_resume_early, pci_dev);
 }
 
 static int pci_pm_default_resume(struct pci_dev *pci_dev)
 {
-	/*
-	 * pci_restore_standard_config() should have been called once already,
-	 * but it would have failed if the device's parent bridge had not been
-	 * in power state D0 at that time.  Check it and try again if necessary.
-	 */
-	if (pci_dev->current_state == PCI_UNKNOWN) {
-		int error = pci_restore_standard_config(pci_dev);
-		if (error)
-			return error;
-	}
-
 	pci_fixup_device(pci_fixup_resume, pci_dev);
 
 	if (!pci_is_bridge(pci_dev))
@@ -575,11 +538,11 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->resume_noirq)
 		error = drv->pm->resume_noirq(dev);
 
@@ -730,11 +693,11 @@
 	struct device_driver *drv = dev->driver;
 	int error = 0;
 
+	pci_pm_default_resume_noirq(pci_dev);
+
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_resume_early(dev);
 
-	pci_pm_default_resume_noirq(pci_dev);
-
 	if (drv && drv->pm && drv->pm->restore_noirq)
 		error = drv->pm->restore_noirq(dev);
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e491fde..17bd932 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -22,7 +22,7 @@
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
-unsigned int pci_pm_d3_delay = 10;
+unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT;
 
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
@@ -426,6 +426,7 @@
  *                           given PCI device
  * @dev: PCI device to handle.
  * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ * @wait: If 'true', wait for the device to change its power state
  *
  * RETURN VALUE:
  * -EINVAL if the requested state is invalid.
@@ -435,7 +436,7 @@
  * 0 if device's power state has been successfully changed.
  */
 static int
-pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
+pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait)
 {
 	u16 pmcsr;
 	bool need_restore = false;
@@ -480,8 +481,10 @@
 		break;
 	case PCI_UNKNOWN: /* Boot-up */
 		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
-		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) {
 			need_restore = true;
+			wait = true;
+		}
 		/* Fall-through: force to D0 */
 	default:
 		pmcsr = 0;
@@ -491,12 +494,15 @@
 	/* enter specified state */
 	pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr);
 
+	if (!wait)
+		return 0;
+
 	/* Mandatory power management transition delays */
 	/* see PCI PM 1.1 5.6.1 table 18 */
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
 		msleep(pci_pm_d3_delay);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
-		udelay(200);
+		udelay(PCI_PM_D2_DELAY);
 
 	dev->current_state = state;
 
@@ -515,7 +521,7 @@
 	if (need_restore)
 		pci_restore_bars(dev);
 
-	if (dev->bus->self)
+	if (wait && dev->bus->self)
 		pcie_aspm_pm_state_change(dev->bus->self);
 
 	return 0;
@@ -585,7 +591,7 @@
 	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state);
+	error = pci_raw_set_power_state(dev, state, true);
 
 	if (state > PCI_D0 && platform_pci_power_manageable(dev)) {
 		/* Allow the platform to finalize the transition */
@@ -730,6 +736,7 @@
 	/* XXX: 100% dword access ok here? */
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+	dev->state_saved = true;
 	if ((i = pci_save_pcie_state(dev)) != 0)
 		return i;
 	if ((i = pci_save_pcix_state(dev)) != 0)
@@ -1374,6 +1381,50 @@
 }
 
 /**
+ * pci_restore_standard_config - restore standard config registers of PCI device
+ * @dev: PCI device to handle
+ *
+ * This function assumes that the device's configuration space is accessible.
+ * If the device needs to be powered up, the function will wait for it to
+ * change the state.
+ */
+int pci_restore_standard_config(struct pci_dev *dev)
+{
+	pci_power_t prev_state;
+	int error;
+
+	pci_restore_state(dev);
+	pci_update_current_state(dev, PCI_D0);
+
+	prev_state = dev->current_state;
+	if (prev_state == PCI_D0)
+		return 0;
+
+	error = pci_raw_set_power_state(dev, PCI_D0, false);
+	if (error)
+		return error;
+
+	if (pci_is_bridge(dev)) {
+		if (prev_state > PCI_D1)
+			mdelay(PCI_PM_BUS_WAIT);
+	} else {
+		switch(prev_state) {
+		case PCI_D3cold:
+		case PCI_D3hot:
+			mdelay(pci_pm_d3_delay);
+			break;
+		case PCI_D2:
+			udelay(PCI_PM_D2_DELAY);
+			break;
+		}
+	}
+
+	dev->current_state = PCI_D0;
+
+	return 0;
+}
+
+/**
  * pci_enable_ari - enable ARI forwarding if hardware support it
  * @dev: the PCI device
  */
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 1351bb4..26ddf78a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -49,6 +49,12 @@
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+extern int pci_restore_standard_config(struct pci_dev *dev);
+
+static inline bool pci_is_bridge(struct pci_dev *pci_dev)
+{
+	return !!(pci_dev->subordinate);
+}
 
 extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
 extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index d30bb76..b56a704 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -20,7 +20,7 @@
 
 static inline unsigned int get_irq_flags(struct resource *res)
 {
-	unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+	unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED;
 
 	flags |= res->flags & IRQF_TRIGGER_MASK;
 
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index acca667..49c3bfa 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -70,7 +70,9 @@
 static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct work_struct *);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
+#ifdef CONFIG_IP_MULTICAST
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+#endif /* CONFIG_IP_MULTICAST */
 static int lcs_recovery(void *ptr);
 
 /**
@@ -1285,6 +1287,8 @@
 	lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
 	return 0;
 }
+#endif /* CONFIG_IP_MULTICAST */
+
 /**
  * function called by net device to
  * handle multicast address relevant things
@@ -1292,6 +1296,7 @@
 static void
 lcs_set_multicast_list(struct net_device *dev)
 {
+#ifdef CONFIG_IP_MULTICAST
         struct lcs_card *card;
 
         LCS_DBF_TEXT(4, trace, "setmulti");
@@ -1299,9 +1304,8 @@
 
         if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
 		schedule_work(&card->kernel_thread_starter);
-}
-
 #endif /* CONFIG_IP_MULTICAST */
+}
 
 static long
 lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 91ef669d..a1a511b 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1322,7 +1322,9 @@
 					       &evt->ext_list_token);
 
 		if (!evt->ext_list) {
-			scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
+			scsi_dma_unmap(scmd);
+			if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+				scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n");
 			return -ENOMEM;
 		}
 	}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 7225b6e..257c241 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1981,6 +1981,7 @@
 		kfree(q->pool[i]);
 	if (q->pool)
 		kfree(q->pool);
+	kfree(q->queue);
 }
 EXPORT_SYMBOL_GPL(iscsi_pool_free);
 
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index c7acef5..33a3c13 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1016,6 +1016,9 @@
 	struct Scsi_Host *host = rport_to_shost(rport);
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	qla2x00_abort_fcport_cmds(fcport);
 
 	/*
@@ -1033,6 +1036,9 @@
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	if (!fcport)
+		return;
+
 	/*
 	 * At this point all fcport's software-states are cleared.  Perform any
 	 * final cleanup of firmware resources (PCBs and XCBs).
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index ba49133..a336b4b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -34,6 +34,7 @@
 extern void qla81xx_update_fw_options(scsi_qla_host_t *);
 extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
+extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9ad4d09..f6368a1 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3562,6 +3562,9 @@
 	WRT_REG_DWORD(&reg->hccr, HCCRX_REL_RISC_PAUSE);
 	RD_REG_DWORD(&reg->hccr);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	if (IS_NOPOLLING_TYPE(ha))
+		ha->isp_ops->enable_intrs(ha);
 }
 
 /* On sparc systems, obtain port and node WWN from firmware
@@ -3847,6 +3850,10 @@
 	uint32_t i;
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = ha->req_q_map[0];
+
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4022,8 +4029,8 @@
 	return QLA_FUNCTION_FAILED;
 }
 
-int
-qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+static int
+qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 {
 	int	rval;
 	int	segments, fragment;
@@ -4043,12 +4050,12 @@
 		qla_printk(KERN_ERR, ha, "Firmware images can be retrieved "
 		    "from: " QLA_FW_URL ".\n");
 
-		/* Try to load RISC code from flash. */
-		qla_printk(KERN_ERR, ha, "Attempting to load (potentially "
-		    "outdated) firmware from flash.\n");
-		return qla24xx_load_risc_flash(vha, srisc_addr);
+		return QLA_FUNCTION_FAILED;
 	}
 
+	qla_printk(KERN_INFO, ha,
+	    "FW: Loading via request-firmware...\n");
+
 	rval = QLA_SUCCESS;
 
 	segments = FA_RISC_CODE_SEGMENTS;
@@ -4133,6 +4140,40 @@
 	return QLA_FUNCTION_FAILED;
 }
 
+int
+qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware via request-firmware interface (.bin file).
+	 * 2) Firmware residing in flash.
+	 */
+	rval = qla24xx_load_risc_blob(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_flash(vha, srisc_addr);
+}
+
+int
+qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+{
+	int rval;
+
+	/*
+	 * FW Load priority:
+	 * 1) Firmware residing in flash.
+	 * 2) Firmware via request-firmware interface (.bin file).
+	 */
+	rval = qla24xx_load_risc_flash(vha, srisc_addr);
+	if (rval == QLA_SUCCESS)
+		return rval;
+
+	return qla24xx_load_risc_blob(vha, srisc_addr);
+}
+
 void
 qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha)
 {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 789fc57..e28ad81 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1868,6 +1868,7 @@
 static int
 qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
 {
+#define MIN_MSIX_COUNT	2
 	int i, ret;
 	struct msix_entry *entries;
 	struct qla_msix_entry *qentry;
@@ -1883,12 +1884,16 @@
 
 	ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 	if (ret) {
+		if (ret < MIN_MSIX_COUNT)
+			goto msix_failed;
+
 		qla_printk(KERN_WARNING, ha,
 			"MSI-X: Failed to enable support -- %d/%d\n"
 			" Retry with %d vectors\n", ha->msix_count, ret, ret);
 		ha->msix_count = ret;
 		ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
 		if (ret) {
+msix_failed:
 			qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable"
 				" support, giving up -- %d/%d\n",
 				ha->msix_count, ret);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index db4df45..f94ffbb 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -58,14 +58,11 @@
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
 	 * non ISP abort time.
 	 */
-	if (!abort_active) {
-		if (!wait_for_completion_timeout(&ha->mbx_cmd_comp,
-		    mcp->tov * HZ)) {
-			/* Timeout occurred. Return error. */
-			DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
-			    "Exiting.\n", __func__, base_vha->host_no));
-			return QLA_FUNCTION_TIMEOUT;
-		}
+	if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) {
+		/* Timeout occurred. Return error. */
+		DEBUG2_3_11(printk("%s(%ld): cmd access timeout. "
+		    "Exiting.\n", __func__, base_vha->host_no));
+		return QLA_FUNCTION_TIMEOUT;
 	}
 
 	ha->flags.mbox_busy = 1;
@@ -265,8 +262,7 @@
 	}
 
 	/* Allow next mbx cmd to come in. */
-	if (!abort_active)
-		complete(&ha->mbx_cmd_comp);
+	complete(&ha->mbx_cmd_comp);
 
 	if (rval) {
 		DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, "
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index cf32653..c11f872 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -65,8 +65,6 @@
 
 static void qla2x00_free_device(scsi_qla_host_t *);
 
-static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-
 int ql2xfdmienable=1;
 module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xfdmienable,
@@ -800,6 +798,7 @@
 		if (ha->isp_ops->abort_command(vha, sp, req)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			"mbx failed.\n", __func__, vha->host_no));
+			ret = FAILED;
 		} else {
 			DEBUG3(printk("%s(%ld): abort_command "
 			"mbx success.\n", __func__, vha->host_no));
@@ -1241,9 +1240,8 @@
  * supported addressing method.
  */
 static void
-qla2x00_config_dma_addressing(scsi_qla_host_t *vha)
+qla2x00_config_dma_addressing(struct qla_hw_data *ha)
 {
-	struct qla_hw_data *ha = vha->hw;
 	/* Assume a 32bit DMA mask. */
 	ha->flags.enable_64bit_addressing = 0;
 
@@ -1480,7 +1478,7 @@
 	.reset_adapter		= qla24xx_reset_adapter,
 	.nvram_config		= qla81xx_nvram_config,
 	.update_fw_options	= qla81xx_update_fw_options,
-	.load_risc		= qla24xx_load_risc,
+	.load_risc		= qla81xx_load_risc,
 	.pci_info_str		= qla24xx_pci_info_str,
 	.fw_version_str		= qla24xx_fw_version_str,
 	.intr_handler		= qla24xx_intr_handler,
@@ -1869,6 +1867,7 @@
 
 	set_bit(0, (unsigned long *) ha->vp_idx_map);
 
+	qla2x00_config_dma_addressing(ha);
 	ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp);
 	if (!ret) {
 		qla_printk(KERN_WARNING, ha,
@@ -1888,13 +1887,13 @@
 		    "[ERROR] Failed to allocate memory for scsi_host\n");
 
 		ret = -ENOMEM;
+		qla2x00_mem_free(ha);
+		qla2x00_free_que(ha, req, rsp);
 		goto probe_hw_failed;
 	}
 
 	pci_set_drvdata(pdev, base_vha);
 
-	qla2x00_config_dma_addressing(base_vha);
-
 	host = base_vha->host;
 	base_vha->req_ques[0] = req->id;
 	host->can_queue = req->length + 128;
@@ -1917,14 +1916,13 @@
 	/* Set up the irqs */
 	ret = qla2x00_request_irqs(ha, rsp);
 	if (ret)
-		goto probe_failed;
-
+		goto probe_init_failed;
 	/* Alloc arrays of request and response ring ptrs */
 	if (!qla2x00_alloc_queues(ha)) {
 		qla_printk(KERN_WARNING, ha,
 		"[ERROR] Failed to allocate memory for queue"
 		" pointers\n");
-		goto probe_failed;
+		goto probe_init_failed;
 	}
 	ha->rsp_q_map[0] = rsp;
 	ha->req_q_map[0] = req;
@@ -1997,6 +1995,10 @@
 
 	return 0;
 
+probe_init_failed:
+	qla2x00_free_que(ha, req, rsp);
+	ha->max_queues = 0;
+
 probe_failed:
 	qla2x00_free_device(base_vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 303f8ee..9c3b694 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -944,9 +944,9 @@
 	if (!ha->fdt_wrt_disable)
 		return;
 
-	/* Disable flash write-protection. */
+	/* Disable flash write-protection, first clear SR protection bit */
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
-	/* Some flash parts need an additional zero-write to clear bits.*/
+	/* Then write zero again to clear remaining SR bits.*/
 	qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
 }
 
@@ -980,12 +980,11 @@
     uint32_t dwords)
 {
 	int ret;
-	uint32_t liter, miter;
+	uint32_t liter;
 	uint32_t sec_mask, rest_addr;
-	uint32_t fdata, findex;
+	uint32_t fdata;
 	dma_addr_t optrom_dma;
 	void *optrom = NULL;
-	uint32_t *s, *d;
 	struct qla_hw_data *ha = vha->hw;
 
 	ret = QLA_SUCCESS;
@@ -1003,17 +1002,15 @@
 	}
 
 	rest_addr = (ha->fdt_block_size >> 2) - 1;
-	sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2);
+	sec_mask = ~rest_addr;
 
 	qla24xx_unprotect_flash(ha);
 
 	for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
-
-		findex = faddr;
-		fdata = (findex & sec_mask) << 2;
+		fdata = (faddr & sec_mask) << 2;
 
 		/* Are we at the beginning of a sector? */
-		if ((findex & rest_addr) == 0) {
+		if ((faddr & rest_addr) == 0) {
 			/* Do sector unprotect. */
 			if (ha->fdt_unprotect_sec_cmd)
 				qla24xx_write_flash_dword(ha,
@@ -1024,7 +1021,7 @@
 			    (fdata & 0xff00) |((fdata << 16) &
 			    0xff0000) | ((fdata >> 16) & 0xff));
 			if (ret != QLA_SUCCESS) {
-				DEBUG9(qla_printk("Unable to flash sector: "
+				DEBUG9(qla_printk("Unable to erase sector: "
 				    "address=%x.\n", faddr));
 				break;
 			}
@@ -1033,9 +1030,7 @@
 		/* Go with burst-write. */
 		if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) {
 			/* Copy data to DMA'ble buffer. */
-			for (miter = 0, s = optrom, d = dwptr;
-			    miter < OPTROM_BURST_DWORDS; miter++, s++, d++)
-				*s = cpu_to_le32(*d);
+			memcpy(optrom, dwptr, OPTROM_BURST_SIZE);
 
 			ret = qla2x00_load_ram(vha, optrom_dma,
 			    flash_data_addr(ha, faddr),
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 808bab6..cfa4c11 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.00-k1"
+#define QLA2XXX_VERSION      "8.03.00-k2"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index d6be076..b586f27 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -244,6 +244,7 @@
 	uint8_t ip_addr[ISCSI_IPADDR_SIZE];
 	uint8_t iscsi_name[ISCSI_NAME_SIZE];	/* 72 x48 */
 	uint8_t iscsi_alias[0x20];
+	uint8_t isid[6];
 };
 
 /*
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 109c5f5..af8c323 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -342,8 +342,12 @@
 	DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no,
 		      __func__, fw_ddb_index));
 	list_for_each_entry(ddb_entry, &ha->ddb_list, list) {
-		if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
-			   ISCSI_NAME_SIZE) == 0) {
+		if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name,
+			   ISCSI_NAME_SIZE) == 0) &&
+			(ddb_entry->tpgt ==
+				le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) &&
+			(memcmp(ddb_entry->isid, fw_ddb_entry->isid,
+				sizeof(ddb_entry->isid)) == 0)) {
 			found++;
 			break;
 		}
@@ -430,6 +434,8 @@
 
 	ddb_entry->port = le16_to_cpu(fw_ddb_entry->port);
 	ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp);
+	memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid));
+
 	memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0],
 	       min(sizeof(ddb_entry->iscsi_name),
 		   sizeof(fw_ddb_entry->iscsi_name)));
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 2a36712..536d8e5 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -806,6 +806,8 @@
 #define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -2152,6 +2154,10 @@
 #endif
 
 static struct pci_device_id serial_pci_tbl[] = {
+	/* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */
+	{	PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
+		PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
+		pbn_b2_8_921600 },
 	{	PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
 		PCI_SUBVENDOR_ID_CONNECT_TECH,
 		PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 3e525e3..7d7f576 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -982,7 +982,7 @@
 
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on MIPS && SOC_PNX8550
+	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
 	select SERIAL_CORE
 	help
 	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 338cf8a..92187e2 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -180,7 +180,7 @@
 	return rc;
 }
 
-static void jsm_remove_one(struct pci_dev *pdev)
+static void __devexit jsm_remove_one(struct pci_dev *pdev)
 {
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 	int i = 0;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 38c600c..3599828 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -32,7 +32,9 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721)
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-#define SCIF_ORER    0x0200   /* overrun error bit */
+# define PORT_PTCR	   0xA405011EUL
+# define PORT_PVCR	   0xA4050122UL
+# define SCIF_ORER	   0x0200   /* overrun error bit */
 #elif defined(CONFIG_SH_RTS7751R2D)
 # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */
 # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
@@ -393,6 +395,7 @@
 SCIx_FNS(SCxTDR, 0x20,  8, 0x0c,  8)
 SCIx_FNS(SCxSR,  0x14, 16, 0x10, 16)
 SCIx_FNS(SCxRDR, 0x24,  8, 0x14,  8)
+SCIx_FNS(SCSPTR, 0,     0,    0,  0)
 SCIF_FNS(SCTDSR, 0x0c,  8)
 SCIF_FNS(SCFER,  0x10, 16)
 SCIF_FNS(SCFCR,  0x18, 16)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4a6fe01..83a185d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -230,17 +230,6 @@
 #
 comment "SPI Protocol Masters"
 
-config SPI_AT25
-	tristate "SPI EEPROMs from most vendors"
-	depends on SYSFS
-	help
-	  Enable this driver to get read/write support to most SPI EEPROMs,
-	  after you configure the board init code to know about each eeprom
-	  on your target board.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called at25.
-
 config SPI_SPIDEV
 	tristate "User mode SPI device driver support"
 	depends on EXPERIMENTAL
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 5e9f521..5d04519 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -33,7 +33,6 @@
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_AT25)		+= at25.o
 obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
 obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
 # 	... add above this line ...
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7c419..8bcde8c 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -13,6 +13,7 @@
 obj-$(CONFIG_USB_ISP116X_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_HCD)	+= host/
 obj-$(CONFIG_USB_UHCI_HCD)	+= host/
+obj-$(CONFIG_USB_FHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 00b47ea..97ba4a9 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1349,6 +1349,12 @@
 	{ USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
+	{ USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 	{ USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
@@ -1370,6 +1376,9 @@
 	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index b5775af..3f3ee13 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -226,6 +226,7 @@
 	{ 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */
 	{ 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */
 	{ 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */
+	{ 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */
 	{ 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */
 	{ 0, 0 }
 };
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 26fece1..7513bb0 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1700,7 +1700,7 @@
 	.release =	usbdev_release,
 };
 
-void usb_fs_classdev_common_remove(struct usb_device *udev)
+static void usbdev_remove(struct usb_device *udev)
 {
 	struct dev_state *ps;
 	struct siginfo sinfo;
@@ -1742,10 +1742,15 @@
 {
 	if (dev->usb_classdev)
 		device_unregister(dev->usb_classdev);
-	usb_fs_classdev_common_remove(dev);
 }
 
-static int usb_classdev_notify(struct notifier_block *self,
+#else
+#define usb_classdev_add(dev)		0
+#define usb_classdev_remove(dev)	do {} while (0)
+
+#endif
+
+static int usbdev_notify(struct notifier_block *self,
 			       unsigned long action, void *dev)
 {
 	switch (action) {
@@ -1755,15 +1760,15 @@
 		break;
 	case USB_DEVICE_REMOVE:
 		usb_classdev_remove(dev);
+		usbdev_remove(dev);
 		break;
 	}
 	return NOTIFY_OK;
 }
 
 static struct notifier_block usbdev_nb = {
-	.notifier_call = 	usb_classdev_notify,
+	.notifier_call = 	usbdev_notify,
 };
-#endif
 
 static struct cdev usb_device_cdev;
 
@@ -1798,9 +1803,8 @@
 	 * to /sys/dev
 	 */
 	usb_classdev_class->dev_kobj = NULL;
-
-	usb_register_notify(&usbdev_nb);
 #endif
+	usb_register_notify(&usbdev_nb);
 out:
 	return retval;
 
@@ -1811,8 +1815,8 @@
 
 void usb_devio_cleanup(void)
 {
-#ifdef CONFIG_USB_DEVICE_CLASS
 	usb_unregister_notify(&usbdev_nb);
+#ifdef CONFIG_USB_DEVICE_CLASS
 	class_destroy(usb_classdev_class);
 #endif
 	cdev_del(&usb_device_cdev);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9876055..d0a21a5 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -284,7 +284,7 @@
 	 * supports "soft" unbinding.
 	 */
 	if (!driver->soft_unbind)
-		usb_disable_interface(udev, intf);
+		usb_disable_interface(udev, intf, false);
 
 	driver->disconnect(intf);
 	usb_cancel_queued_reset(intf);
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 507741e..c54fc40 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -128,7 +128,6 @@
 	}
 
 	pci_set_master(dev);
-	device_set_wakeup_enable(&dev->dev, 1);
 
 	retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
@@ -201,6 +200,7 @@
 	struct usb_hcd		*hcd = pci_get_drvdata(dev);
 	int			retval = 0;
 	int			wake, w;
+	int			has_pci_pm;
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
@@ -230,6 +230,15 @@
 
 	synchronize_irq(dev->irq);
 
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling) and enter some PCI
+	 * low power state, if the hardware allows.
+	 */
+	pci_disable_device(dev);
+
+	pci_save_state(dev);
+
 	/* Don't fail on error to enable wakeup.  We rely on pci code
 	 * to reject requests the hardware can't implement, rather
 	 * than coding the same thing.
@@ -241,35 +250,6 @@
 		wake = w;
 	dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-	/* Downstream ports from this root hub should already be quiesced, so
-	 * there will be no DMA activity.  Now we can shut down the upstream
-	 * link (except maybe for PME# resume signaling) and enter some PCI
-	 * low power state, if the hardware allows.
-	 */
-	pci_disable_device(dev);
- done:
-	return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-	int			retval = 0;
-	int			has_pci_pm;
-
-	/* We might already be suspended (runtime PM -- not yet written) */
-	if (dev->current_state != PCI_D0)
-		goto done;
-
-	pci_save_state(dev);
-
 	/* Don't change state if we don't need to */
 	if (message.event == PM_EVENT_FREEZE ||
 			message.event == PM_EVENT_PRETHAW) {
@@ -315,7 +295,7 @@
  done:
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -325,65 +305,8 @@
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-	int		retval = 0;
-	pci_power_t	state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-	/* Reenable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node *of_node;
-
-		of_node = pci_device_to_OF_node(dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE,
-						of_node, 0, 1);
-	}
-#endif
-
-	/* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-	 * calls "standby", "suspend to RAM", and so on).  There are also
-	 * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-	 */
-	if (state != PCI_D0) {
-#ifdef	DEBUG
-		int	pci_pm;
-		u16	pmcr;
-
-		pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-		pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-		pmcr &= PCI_PM_CTRL_STATE_MASK;
-		if (pmcr) {
-			/* Clean case:  power to USB and to HC registers was
-			 * maintained; remote wakeup is easy.
-			 */
-			dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-		} else {
-			/* Clean:  HC lost Vcc power, D0 uninitialized
-			 *   + Vaux may have preserved port and transceiver
-			 *     state ... for remote wakeup from D3cold
-			 *   + or not; HCD must reinit + re-enumerate
-			 *
-			 * Dirty: D0 semi-initialized cases with swsusp
-			 *   + after BIOS init
-			 *   + after Linux init (HCD statically linked)
-			 */
-			dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-					state);
-		}
-#endif
-
-		retval = pci_set_power_state(dev, PCI_D0);
-	} else {
-		/* Same basic cases: clean (powered/not), dirty */
-		dev_dbg(&dev->dev, "PCI legacy resume\n");
-	}
-
-	if (retval < 0)
-		dev_err(&dev->dev, "can't resume: %d\n", retval);
-	else
-		pci_restore_state(dev);
-
-	return retval;
+	pci_restore_state(dev);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -398,6 +321,18 @@
 	struct usb_hcd		*hcd;
 	int			retval;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Reenable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node *of_node;
+
+		of_node = pci_device_to_OF_node(dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+						of_node, 0, 1);
+	}
+#endif
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
@@ -405,6 +340,8 @@
 		return 0;
 	}
 
+	pci_enable_wake(dev, PCI_D0, false);
+
 	retval = pci_enable_device(dev);
 	if (retval < 0) {
 		dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 572d2cf..5b94a56 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94d5ee2..cd50d86 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2382,8 +2382,8 @@
 
 void usb_ep0_reinit(struct usb_device *udev)
 {
-	usb_disable_endpoint(udev, 0 + USB_DIR_IN);
-	usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+	usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+	usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
 	usb_enable_endpoint(udev, &udev->ep0, true);
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 2a129cb..dff5760 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -717,7 +717,6 @@
 		fs_remove_file (dev->usbfs_dentry);
 		dev->usbfs_dentry = NULL;
 	}
-	usb_fs_classdev_common_remove(dev);
 }
 
 static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index de51667..31fb204 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1039,14 +1039,15 @@
  * @dev: the device whose endpoint is being disabled
  * @epaddr: the endpoint's address.  Endpoint number for output,
  *	endpoint number + USB_DIR_IN for input
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
- * Deallocates hcd/hardware state for this endpoint ... and nukes all
- * pending urbs.
- *
- * If the HCD hasn't registered a disable() function, this sets the
- * endpoint's maxpacket size to 0 to prevent further submissions.
+ * Disables the endpoint for URB submission and nukes all pending URBs.
+ * If @reset_hardware is set then also deallocates hcd/hardware state
+ * for the endpoint.
  */
-void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr)
+void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware)
 {
 	unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
 	struct usb_host_endpoint *ep;
@@ -1056,15 +1057,18 @@
 
 	if (usb_endpoint_out(epaddr)) {
 		ep = dev->ep_out[epnum];
-		dev->ep_out[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_out[epnum] = NULL;
 	} else {
 		ep = dev->ep_in[epnum];
-		dev->ep_in[epnum] = NULL;
+		if (reset_hardware)
+			dev->ep_in[epnum] = NULL;
 	}
 	if (ep) {
 		ep->enabled = 0;
 		usb_hcd_flush_endpoint(dev, ep);
-		usb_hcd_disable_endpoint(dev, ep);
+		if (reset_hardware)
+			usb_hcd_disable_endpoint(dev, ep);
 	}
 }
 
@@ -1072,17 +1076,21 @@
  * usb_disable_interface -- Disable all endpoints for an interface
  * @dev: the device whose interface is being disabled
  * @intf: pointer to the interface descriptor
+ * @reset_hardware: flag to erase any endpoint state stored in the
+ *	controller hardware
  *
  * Disables all the endpoints for the interface's current altsetting.
  */
-void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
+void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
+		bool reset_hardware)
 {
 	struct usb_host_interface *alt = intf->cur_altsetting;
 	int i;
 
 	for (i = 0; i < alt->desc.bNumEndpoints; ++i) {
 		usb_disable_endpoint(dev,
-				alt->endpoint[i].desc.bEndpointAddress);
+				alt->endpoint[i].desc.bEndpointAddress,
+				reset_hardware);
 	}
 }
 
@@ -1103,8 +1111,8 @@
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
 	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 	dev->toggle[0] = dev->toggle[1] = 0;
 
@@ -1274,7 +1282,7 @@
 		remove_intf_ep_devs(iface);
 		usb_remove_sysfs_intf_files(iface);
 	}
-	usb_disable_interface(dev, iface);
+	usb_disable_interface(dev, iface, true);
 
 	iface->cur_altsetting = alt;
 
@@ -1353,8 +1361,8 @@
 	 */
 
 	for (i = 1; i < 16; ++i) {
-		usb_disable_endpoint(dev, i);
-		usb_disable_endpoint(dev, i + USB_DIR_IN);
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
 	}
 
 	config = dev->actconfig;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 3861778..79d8a9e 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -15,9 +15,10 @@
 		struct usb_host_endpoint *ep, bool reset_toggle);
 extern void usb_enable_interface(struct usb_device *dev,
 		struct usb_interface *intf, bool reset_toggles);
-extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr);
+extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
+		bool reset_hardware);
 extern void usb_disable_interface(struct usb_device *dev,
-		struct usb_interface *intf);
+		struct usb_interface *intf, bool reset_hardware);
 extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
@@ -151,7 +152,6 @@
 extern const struct file_operations usbfs_devices_fops;
 extern const struct file_operations usbdev_file_operations;
 extern void usbfs_conn_disc_event(void);
-extern void usb_fs_classdev_common_remove(struct usb_device *udev);
 
 extern int usb_devio_init(void);
 extern void usb_devio_cleanup(void);
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f2da026..5d11c29 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -683,6 +683,7 @@
 	struct usb_request		*req = cdev->req;
 	int				value = -EOPNOTSUPP;
 	u16				w_index = le16_to_cpu(ctrl->wIndex);
+	u8				intf = w_index & 0xFF;
 	u16				w_value = le16_to_cpu(ctrl->wValue);
 	u16				w_length = le16_to_cpu(ctrl->wLength);
 	struct usb_function		*f = NULL;
@@ -769,10 +770,10 @@
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
-		if (w_value && !f->get_alt)
+		if (w_value && !f->set_alt)
 			break;
 		value = f->set_alt(f, w_index, w_value);
 		break;
@@ -781,7 +782,7 @@
 			goto unknown;
 		if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
 			break;
-		f = cdev->config->interface[w_index];
+		f = cdev->config->interface[intf];
 		if (!f)
 			break;
 		/* lots of interfaces only need altsetting zero... */
@@ -808,7 +809,7 @@
 		 */
 		if ((ctrl->bRequestType & USB_RECIP_MASK)
 				== USB_RECIP_INTERFACE) {
-			f = cdev->config->interface[w_index];
+			f = cdev->config->interface[intf];
 			if (f && f->setup)
 				value = f->setup(f, ctrl);
 			else
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index cde8fdf..77c5d0a 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -297,7 +297,7 @@
 
 		for (i = 0; i < 100; i ++) {
 			temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep)));
-	 		if (!temp & EPSTAT_STALL)
+			if (!(temp & EPSTAT_STALL))
 	 			break;
 	 		udelay(20);
 	 	}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2b476b6..2c63bfb 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -140,6 +140,7 @@
 	tristate "OHCI HCD support"
 	depends on USB && USB_ARCH_HAS_OHCI
 	select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+	select USB_OTG_UTILS if ARCH_OMAP
 	---help---
 	  The Open Host Controller Interface (OHCI) is a standard for accessing
 	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
@@ -238,6 +239,23 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called uhci-hcd.
 
+config USB_FHCI_HCD
+	tristate "Freescale QE USB Host Controller support"
+	depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE
+	select FSL_GTM
+	select QE_USB
+	help
+	  This driver enables support for Freescale QE USB Host Controller
+	  (as found on MPC8360 and MPC8323 processors), the driver supports
+	  Full and Low Speed USB.
+
+config FHCI_DEBUG
+	bool "Freescale QE USB Host Controller debug support"
+	depends on USB_FHCI_HCD && DEBUG_FS
+	help
+	  Say "y" to see some FHCI debug information and statistics
+	  throught debugfs.
+
 config USB_U132_HCD
 	tristate "Elan U132 Adapter Host Controller"
 	depends on USB && USB_FTDI_ELAN
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e5f3f20..f163571 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,6 +7,11 @@
 endif
 
 isp1760-objs := isp1760-hcd.o isp1760-if.o
+fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
+	     fhci-tds.o fhci-sched.o
+ifeq ($(CONFIG_FHCI_DEBUG),y)
+fhci-objs += fhci-dbg.o
+endif
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -17,6 +22,7 @@
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
+obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
 obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bdc6e86..bb21fb0 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -230,7 +230,7 @@
 		pci_read_config_word(pdev, 0x62, &port_wake);
 		if (port_wake & 0x0001) {
 			dev_warn(&pdev->dev, "Enabling legacy PCI PM\n");
-			device_init_wakeup(&pdev->dev, 1);
+			device_set_wakeup_capable(&pdev->dev, 1);
 		}
 	}
 
@@ -432,7 +432,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c
new file mode 100644
index 0000000..34e14ed
--- /dev/null
+++ b/drivers/usb/host/fhci-dbg.c
@@ -0,0 +1,139 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er)
+{
+	int i;
+
+	if (usb_er == -1) {
+		fhci->usb_irq_stat[12]++;
+		return;
+	}
+
+	for (i = 0; i < 12; ++i) {
+		if (usb_er & (1 << i))
+			fhci->usb_irq_stat[i]++;
+	}
+}
+
+static int fhci_dfs_regs_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	struct fhci_regs __iomem *regs = fhci->regs;
+
+	seq_printf(s,
+		"mode: 0x%x\n" "addr: 0x%x\n"
+		"command: 0x%x\n" "ep0: 0x%x\n"
+		"event: 0x%x\n" "mask: 0x%x\n"
+		"status: 0x%x\n" "SOF timer: %d\n"
+		"frame number: %d\n"
+		"lines status: 0x%x\n",
+		in_8(&regs->usb_mod), in_8(&regs->usb_addr),
+		in_8(&regs->usb_comm), in_be16(&regs->usb_ep[0]),
+		in_be16(&regs->usb_event), in_be16(&regs->usb_mask),
+		in_8(&regs->usb_status), in_be16(&regs->usb_sof_tmr),
+		in_be16(&regs->usb_frame_num),
+		fhci_ioports_check_bus_state(fhci));
+
+	return 0;
+}
+
+static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v)
+{
+	struct fhci_hcd *fhci = s->private;
+	int *usb_irq_stat = fhci->usb_irq_stat;
+
+	seq_printf(s,
+		"RXB: %d\n" "TXB: %d\n" "BSY: %d\n"
+		"SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n"
+		"TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n"
+		"RESET: %d\n" "SFT: %d\n" "MSF: %d\n"
+		"IDLE_ONLY: %d\n",
+		usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2],
+		usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5],
+		usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8],
+		usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11],
+		usb_irq_stat[12]);
+
+	return 0;
+}
+
+static int fhci_dfs_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_regs_show, inode->i_private);
+}
+
+static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, fhci_dfs_irq_stat_show, inode->i_private);
+}
+
+static const struct file_operations fhci_dfs_regs_fops = {
+	.open = fhci_dfs_regs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations fhci_dfs_irq_stat_fops = {
+	.open = fhci_dfs_irq_stat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void fhci_dfs_create(struct fhci_hcd *fhci)
+{
+	struct device *dev = fhci_to_hcd(fhci)->self.controller;
+
+	fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL);
+	if (!fhci->dfs_root) {
+		WARN_ON(1);
+		return;
+	}
+
+	fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO,
+		fhci->dfs_root, fhci, &fhci_dfs_regs_fops);
+
+	fhci->dfs_irq_stat = debugfs_create_file("irq_stat",
+		S_IFREG | S_IRUGO, fhci->dfs_root, fhci,
+		&fhci_dfs_irq_stat_fops);
+
+	WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat);
+}
+
+void fhci_dfs_destroy(struct fhci_hcd *fhci)
+{
+	if (!fhci->dfs_root)
+		return;
+
+	if (fhci->dfs_irq_stat)
+		debugfs_remove(fhci->dfs_irq_stat);
+
+	if (fhci->dfs_regs)
+		debugfs_remove(fhci->dfs_regs);
+
+	debugfs_remove(fhci->dfs_root);
+}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
new file mode 100644
index 0000000..ba622cc
--- /dev/null
+++ b/drivers/usb/host/fhci-hcd.c
@@ -0,0 +1,836 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+void fhci_start_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	/* clear frame_n */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	out_be16(&fhci->regs->usb_sof_tmr, 0);
+	setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_stop_sof_timer(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE);
+	gtm_stop_timer16(fhci->timer);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb)
+{
+	return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12);
+}
+
+/* initialize the endpoint zero */
+static u32 endpoint_zero_init(struct fhci_usb *usb,
+			      enum fhci_mem_alloc data_mem,
+			      u32 ring_len)
+{
+	u32 rc;
+
+	rc = fhci_create_ep(usb, data_mem, ring_len);
+	if (rc)
+		return rc;
+
+	/* inilialize endpoint registers */
+	fhci_init_ep_registers(usb, usb->ep0, data_mem);
+
+	return 0;
+}
+
+/* enable the USB interrupts */
+void fhci_usb_enable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 1) {
+		/* initialize the USB interrupt */
+		enable_irq(fhci_to_hcd(fhci)->irq);
+
+		/* initialize the event register and mask register */
+		out_be16(&usb->fhci->regs->usb_event, 0xffff);
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+		/* enable the timer interrupts */
+		enable_irq(fhci->timer->irq);
+	} else if (usb->intr_nesting_cnt > 1)
+		fhci_info(fhci, "unbalanced USB interrupts nesting\n");
+	usb->intr_nesting_cnt--;
+}
+
+/* diable the usb interrupt */
+void fhci_usb_disable_interrupt(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb->intr_nesting_cnt == 0) {
+		/* diable the timer interrupt */
+		disable_irq_nosync(fhci->timer->irq);
+
+		/* disable the usb interrupt */
+		disable_irq_nosync(fhci_to_hcd(fhci)->irq);
+		out_be16(&usb->fhci->regs->usb_mask, 0);
+	}
+	usb->intr_nesting_cnt++;
+}
+
+/* enable the USB controller */
+static u32 fhci_usb_enable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	mdelay(100);
+
+	return 0;
+}
+
+/* disable the USB controller */
+static u32 fhci_usb_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_usb_disable_interrupt(usb);
+	fhci_port_disable(fhci);
+
+	/* disable the usb controller */
+	if (usb->port_status == FHCI_PORT_FULL ||
+			usb->port_status == FHCI_PORT_LOW)
+		fhci_device_disconnected_interrupt(fhci);
+
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	return 0;
+}
+
+/* check the bus state by polling the QE bit on the IO ports */
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci)
+{
+	u8 bits = 0;
+
+	/* check USBOE,if transmitting,exit */
+	if (!gpio_get_value(fhci->gpios[GPIO_USBOE]))
+		return -1;
+
+	/* check USBRP */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRP]))
+		bits |= 0x2;
+
+	/* check USBRN */
+	if (gpio_get_value(fhci->gpios[GPIO_USBRN]))
+		bits |= 0x1;
+
+	return bits;
+}
+
+static void fhci_mem_free(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+	struct ed *next_ed;
+	struct td *td;
+	struct td *next_td;
+
+	list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) {
+		list_del(&ed->node);
+		kfree(ed);
+	}
+
+	list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) {
+		list_del(&td->node);
+		kfree(td);
+	}
+
+	kfree(fhci->vroot_hub);
+	fhci->vroot_hub = NULL;
+
+	kfree(fhci->hc_list);
+	fhci->hc_list = NULL;
+}
+
+static int fhci_mem_init(struct fhci_hcd *fhci)
+{
+	int i;
+
+	fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL);
+	if (!fhci->hc_list)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->hc_list->ctrl_list);
+	INIT_LIST_HEAD(&fhci->hc_list->bulk_list);
+	INIT_LIST_HEAD(&fhci->hc_list->iso_list);
+	INIT_LIST_HEAD(&fhci->hc_list->intr_list);
+	INIT_LIST_HEAD(&fhci->hc_list->done_list);
+
+	fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL);
+	if (!fhci->vroot_hub)
+		goto err;
+
+	INIT_LIST_HEAD(&fhci->empty_eds);
+	INIT_LIST_HEAD(&fhci->empty_tds);
+
+	/* initialize work queue to handle done list */
+	fhci_tasklet.data = (unsigned long)fhci;
+	fhci->process_done_task = &fhci_tasklet;
+
+	for (i = 0; i < MAX_TDS; i++) {
+		struct td *td;
+
+		td = kmalloc(sizeof(*td), GFP_KERNEL);
+		if (!td)
+			goto err;
+		fhci_recycle_empty_td(fhci, td);
+	}
+	for (i = 0; i < MAX_EDS; i++) {
+		struct ed *ed;
+
+		ed = kmalloc(sizeof(*ed), GFP_KERNEL);
+		if (!ed)
+			goto err;
+		fhci_recycle_empty_ed(fhci, ed);
+	}
+
+	fhci->active_urbs = 0;
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return -ENOMEM;
+}
+
+/* destroy the fhci_usb structure */
+static void fhci_usb_free(void *lld)
+{
+	struct fhci_usb *usb = lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (usb) {
+		fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+		fhci_ep0_free(usb);
+		kfree(usb->actual_frame);
+		kfree(usb);
+	}
+}
+
+/* initialize the USB */
+static int fhci_usb_init(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE);
+
+	usb->port_status = FHCI_PORT_DISABLED;
+	usb->max_frame_usage = FRAME_TIME_USAGE;
+	usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION;
+
+	usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL);
+	if (!usb->actual_frame) {
+		fhci_usb_free(usb);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&usb->actual_frame->tds_list);
+
+	/* initializing registers on chip, clear frame number */
+	out_be16(&fhci->pram->frame_num, 0);
+
+	/* clear rx state */
+	out_be32(&fhci->pram->rx_state, 0);
+
+	/* set mask register */
+	usb->saved_msk = (USB_E_TXB_MASK |
+			  USB_E_TXE1_MASK |
+			  USB_E_IDLE_MASK |
+			  USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK);
+
+	out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN);
+
+	/* clearing the mask register */
+	out_be16(&usb->fhci->regs->usb_mask, 0);
+
+	/* initialing the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+
+	if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) {
+		fhci_usb_free(usb);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* initialize the fhci_usb struct and the corresponding data staruct */
+static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb;
+
+	/* allocate memory for SCC data structure */
+	usb = kzalloc(sizeof(*usb), GFP_KERNEL);
+	if (!usb) {
+		fhci_err(fhci, "no memory for SCC data struct\n");
+		return NULL;
+	}
+
+	usb->fhci = fhci;
+	usb->hc_list = fhci->hc_list;
+	usb->vroot_hub = fhci->vroot_hub;
+
+	usb->transfer_confirm = fhci_transfer_confirm_callback;
+
+	return usb;
+}
+
+static int fhci_start(struct usb_hcd *hcd)
+{
+	int ret;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	ret = fhci_mem_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "failed to allocate memory\n");
+		goto err;
+	}
+
+	fhci->usb_lld = fhci_create_lld(fhci);
+	if (!fhci->usb_lld) {
+		fhci_err(fhci, "low level driver config failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = fhci_usb_init(fhci);
+	if (ret) {
+		fhci_err(fhci, "low level driver initialize failed\n");
+		goto err;
+	}
+
+	spin_lock_init(&fhci->lock);
+
+	/* connect the virtual root hub */
+	fhci->vroot_hub->dev_num = 1;	/* this field may be needed to fix */
+	fhci->vroot_hub->hub.wHubStatus = 0;
+	fhci->vroot_hub->hub.wHubChange = 0;
+	fhci->vroot_hub->port.wPortStatus = 0;
+	fhci->vroot_hub->port.wPortChange = 0;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/*
+	 * From here on, khubd concurrently accesses the root
+	 * hub; drivers will be talking to enumerated devices.
+	 * (On restart paths, khubd already knows about the root
+	 * hub and could find work as soon as we wrote FLAG_CF.)
+	 *
+	 * Before this point the HC was idle/ready.  After, khubd
+	 * and device drivers may start it running.
+	 */
+	fhci_usb_enable(fhci);
+	return 0;
+err:
+	fhci_mem_free(fhci);
+	return ret;
+}
+
+static void fhci_stop(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	fhci_usb_disable_interrupt(fhci->usb_lld);
+	fhci_usb_disable(fhci);
+
+	fhci_usb_free(fhci->usb_lld);
+	fhci->usb_lld = NULL;
+	fhci_mem_free(fhci);
+}
+
+static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+			    gfp_t mem_flags)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	u32 pipe = urb->pipe;
+	int ret;
+	int i;
+	int size = 0;
+	struct urb_priv *urb_priv;
+	unsigned long flags;
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		/* 1 td fro setup,1 for ack */
+		size = 2;
+	case PIPE_BULK:
+		/* one td for every 4096 bytes(can be upto 8k) */
+		size += urb->transfer_buffer_length / 4096;
+		/* ...add for any remaining bytes... */
+		if ((urb->transfer_buffer_length % 4096) != 0)
+			size++;
+		/* ..and maybe a zero length packet to wrap it up */
+		if (size == 0)
+			size++;
+		else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+			 && (urb->transfer_buffer_length
+			     % usb_maxpacket(urb->dev, pipe,
+					     usb_pipeout(pipe))) != 0)
+			size++;
+		break;
+	case PIPE_ISOCHRONOUS:
+		size = urb->number_of_packets;
+		if (size <= 0)
+			return -EINVAL;
+		for (i = 0; i < urb->number_of_packets; i++) {
+			urb->iso_frame_desc[i].actual_length = 0;
+			urb->iso_frame_desc[i].status = (u32) (-EXDEV);
+		}
+		break;
+	case PIPE_INTERRUPT:
+		size = 1;
+	}
+
+	/* allocate the private part of the URB */
+	urb_priv = kzalloc(sizeof(*urb_priv), mem_flags);
+	if (!urb_priv)
+		return -ENOMEM;
+
+	/* allocate the private part of the URB */
+	urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags);
+	if (!urb_priv->tds) {
+		kfree(urb_priv);
+		return -ENOMEM;
+	}
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_link_urb_to_ep(hcd, urb);
+	if (ret)
+		goto err;
+
+	/* fill the private part of the URB */
+	urb_priv->num_of_tds = size;
+
+	urb->status = -EINPROGRESS;
+	urb->actual_length = 0;
+	urb->error_count = 0;
+	urb->hcpriv = urb_priv;
+
+	fhci_queue_urb(fhci, urb);
+err:
+	if (ret) {
+		kfree(urb_priv->tds);
+		kfree(urb_priv);
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+	return ret;
+}
+
+/* dequeue FHCI URB */
+static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+	int ret = -EINVAL;
+	unsigned long flags;
+
+	if (!urb || !urb->dev || !urb->dev->bus)
+		goto out;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+	if (ret)
+		goto out2;
+
+	if (usb->port_status != FHCI_PORT_DISABLED) {
+		struct urb_priv *urb_priv;
+
+		/*
+		 * flag the urb's data for deletion in some upcoming
+		 * SF interrupt's delete list processing
+		 */
+		urb_priv = urb->hcpriv;
+
+		if (!urb_priv || (urb_priv->state == URB_DEL))
+			goto out2;
+
+		urb_priv->state = URB_DEL;
+
+		/* already pending? */
+		urb_priv->ed->state = FHCI_ED_URB_DEL;
+	} else {
+		fhci_urb_complete_free(fhci, urb);
+	}
+
+out2:
+	spin_unlock_irqrestore(&fhci->lock, flags);
+out:
+	return ret;
+}
+
+static void fhci_endpoint_disable(struct usb_hcd *hcd,
+				  struct usb_host_endpoint *ep)
+{
+	struct fhci_hcd *fhci;
+	struct ed *ed;
+	unsigned long flags;
+
+	fhci = hcd_to_fhci(hcd);
+	spin_lock_irqsave(&fhci->lock, flags);
+	ed = ep->hcpriv;
+	if (ed) {
+		while (ed->td_head != NULL) {
+			struct td *td = fhci_remove_td_from_ed(ed);
+			fhci_urb_complete_free(fhci, td->urb);
+		}
+		fhci_recycle_empty_ed(fhci, ed);
+		ep->hcpriv = NULL;
+	}
+	spin_unlock_irqrestore(&fhci->lock, flags);
+}
+
+static int fhci_get_frame_number(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+
+	return get_frame_num(fhci);
+}
+
+static const struct hc_driver fhci_driver = {
+	.description = "fsl,usb-fhci",
+	.product_desc = "FHCI HOST Controller",
+	.hcd_priv_size = sizeof(struct fhci_hcd),
+
+	/* generic hardware linkage */
+	.irq = fhci_irq,
+	.flags = HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operation */
+	.start = fhci_start,
+	.stop = fhci_stop,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue = fhci_urb_enqueue,
+	.urb_dequeue = fhci_urb_dequeue,
+	.endpoint_disable = fhci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number = fhci_get_frame_number,
+
+	/* root hub support */
+	.hub_status_data = fhci_hub_status_data,
+	.hub_control = fhci_hub_control,
+};
+
+static int __devinit of_fhci_probe(struct of_device *ofdev,
+				   const struct of_device_id *ofid)
+{
+	struct device *dev = &ofdev->dev;
+	struct device_node *node = ofdev->node;
+	struct usb_hcd *hcd;
+	struct fhci_hcd *fhci;
+	struct resource usb_regs;
+	unsigned long pram_addr;
+	unsigned int usb_irq;
+	const char *sprop;
+	const u32 *iprop;
+	int size;
+	int ret;
+	int i;
+	int j;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	sprop = of_get_property(node, "mode", NULL);
+	if (sprop && strcmp(sprop, "host"))
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id);
+	if (!hcd) {
+		dev_err(dev, "could not create hcd\n");
+		return -ENOMEM;
+	}
+
+	fhci = hcd_to_fhci(hcd);
+	hcd->self.controller = dev;
+	dev_set_drvdata(dev, hcd);
+
+	iprop = of_get_property(node, "hub-power-budget", &size);
+	if (iprop && size == sizeof(*iprop))
+		hcd->power_budget = *iprop;
+
+	/* FHCI registers. */
+	ret = of_address_to_resource(node, 0, &usb_regs);
+	if (ret) {
+		dev_err(dev, "could not get regs\n");
+		goto err_regs;
+	}
+
+	hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1);
+	if (!hcd->regs) {
+		dev_err(dev, "could not ioremap regs\n");
+		ret = -ENOMEM;
+		goto err_regs;
+	}
+	fhci->regs = hcd->regs;
+
+	/* Parameter RAM. */
+	iprop = of_get_property(node, "reg", &size);
+	if (!iprop || size < sizeof(*iprop) * 4) {
+		dev_err(dev, "can't get pram offset\n");
+		ret = -EINVAL;
+		goto err_pram;
+	}
+
+	pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE);
+	if (IS_ERR_VALUE(pram_addr)) {
+		dev_err(dev, "failed to allocate usb pram\n");
+		ret = -ENOMEM;
+		goto err_pram;
+	}
+	fhci->pram = cpm_muram_addr(pram_addr);
+
+	/* GPIOs and pins */
+	for (i = 0; i < NUM_GPIOS; i++) {
+		int gpio;
+		enum of_gpio_flags flags;
+
+		gpio = of_get_gpio_flags(node, i, &flags);
+		fhci->gpios[i] = gpio;
+		fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW;
+
+		if (!gpio_is_valid(gpio)) {
+			if (i < GPIO_SPEED) {
+				dev_err(dev, "incorrect GPIO%d: %d\n",
+					i, gpio);
+				goto err_gpios;
+			} else {
+				dev_info(dev, "assuming board doesn't have "
+					"%s gpio\n", i == GPIO_SPEED ?
+					"speed" : "power");
+				continue;
+			}
+		}
+
+		ret = gpio_request(gpio, dev->bus_id);
+		if (ret) {
+			dev_err(dev, "failed to request gpio %d", i);
+			goto err_gpios;
+		}
+
+		if (i >= GPIO_SPEED) {
+			ret = gpio_direction_output(gpio, 0);
+			if (ret) {
+				dev_err(dev, "failed to set gpio %d as "
+					"an output\n", i);
+				i++;
+				goto err_gpios;
+			}
+		}
+	}
+
+	for (j = 0; j < NUM_PINS; j++) {
+		fhci->pins[j] = qe_pin_request(ofdev->node, j);
+		if (IS_ERR(fhci->pins[j])) {
+			ret = PTR_ERR(fhci->pins[j]);
+			dev_err(dev, "can't get pin %d: %d\n", j, ret);
+			goto err_pins;
+		}
+	}
+
+	/* Frame limit timer and its interrupt. */
+	fhci->timer = gtm_get_timer16();
+	if (IS_ERR(fhci->timer)) {
+		ret = PTR_ERR(fhci->timer);
+		dev_err(dev, "failed to request qe timer: %i", ret);
+		goto err_get_timer;
+	}
+
+	ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq,
+			  IRQF_DISABLED, "qe timer (usb)", hcd);
+	if (ret) {
+		dev_err(dev, "failed to request timer irq");
+		goto err_timer_irq;
+	}
+
+	/* USB Host interrupt. */
+	usb_irq = irq_of_parse_and_map(node, 0);
+	if (usb_irq == NO_IRQ) {
+		dev_err(dev, "could not get usb irq\n");
+		ret = -EINVAL;
+		goto err_usb_irq;
+	}
+
+	/* Clocks. */
+	sprop = of_get_property(node, "fsl,fullspeed-clock", NULL);
+	if (sprop) {
+		fhci->fullspeed_clk = qe_clock_source(sprop);
+		if (fhci->fullspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong fullspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	sprop = of_get_property(node, "fsl,lowspeed-clock", NULL);
+	if (sprop) {
+		fhci->lowspeed_clk = qe_clock_source(sprop);
+		if (fhci->lowspeed_clk == QE_CLK_DUMMY) {
+			dev_err(dev, "wrong lowspeed-clock\n");
+			ret = -EINVAL;
+			goto err_clocks;
+		}
+	}
+
+	if (fhci->fullspeed_clk == QE_CLK_NONE &&
+			fhci->lowspeed_clk == QE_CLK_NONE) {
+		dev_err(dev, "no clocks specified\n");
+		ret = -EINVAL;
+		goto err_clocks;
+	}
+
+	dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq);
+
+	fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+
+	/* Start with full-speed, if possible. */
+	if (fhci->fullspeed_clk != QE_CLK_NONE) {
+		fhci_config_transceiver(fhci, FHCI_PORT_FULL);
+		qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+	} else {
+		fhci_config_transceiver(fhci, FHCI_PORT_LOW);
+		qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+	}
+
+	/* Clear and disable any pending interrupts. */
+	out_be16(&fhci->regs->usb_event, 0xffff);
+	out_be16(&fhci->regs->usb_mask, 0);
+
+	ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED);
+	if (ret < 0)
+		goto err_add_hcd;
+
+	fhci_dfs_create(fhci);
+
+	return 0;
+
+err_add_hcd:
+err_clocks:
+	irq_dispose_mapping(usb_irq);
+err_usb_irq:
+	free_irq(fhci->timer->irq, hcd);
+err_timer_irq:
+	gtm_put_timer16(fhci->timer);
+err_get_timer:
+err_pins:
+	while (--j >= 0)
+		qe_pin_free(fhci->pins[j]);
+err_gpios:
+	while (--i >= 0) {
+		if (gpio_is_valid(fhci->gpios[i]))
+			gpio_free(fhci->gpios[i]);
+	}
+	cpm_muram_free(pram_addr);
+err_pram:
+	iounmap(hcd->regs);
+err_regs:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int __devexit fhci_remove(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int i;
+	int j;
+
+	usb_remove_hcd(hcd);
+	free_irq(fhci->timer->irq, hcd);
+	gtm_put_timer16(fhci->timer);
+	cpm_muram_free(cpm_muram_offset(fhci->pram));
+	for (i = 0; i < NUM_GPIOS; i++) {
+		if (!gpio_is_valid(fhci->gpios[i]))
+			continue;
+		gpio_free(fhci->gpios[i]);
+	}
+	for (j = 0; j < NUM_PINS; j++)
+		qe_pin_free(fhci->pins[j]);
+	fhci_dfs_destroy(fhci);
+	usb_put_hcd(hcd);
+	return 0;
+}
+
+static int __devexit of_fhci_remove(struct of_device *ofdev)
+{
+	return fhci_remove(&ofdev->dev);
+}
+
+static struct of_device_id of_fhci_match[] = {
+	{ .compatible = "fsl,mpc8323-qe-usb", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_fhci_match);
+
+static struct of_platform_driver of_fhci_driver = {
+	.name		= "fsl,usb-fhci",
+	.match_table	= of_fhci_match,
+	.probe		= of_fhci_probe,
+	.remove		= __devexit_p(of_fhci_remove),
+};
+
+static int __init fhci_module_init(void)
+{
+	return of_register_platform_driver(&of_fhci_driver);
+}
+module_init(fhci_module_init);
+
+static void __exit fhci_module_exit(void)
+{
+	of_unregister_platform_driver(&of_fhci_driver);
+}
+module_exit(fhci_module_exit);
+
+MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver");
+MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, "
+	      "Jerry Huang <Chang-Ming.Huang@freescale.com>, "
+	      "Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c
new file mode 100644
index 0000000..0cfaedc
--- /dev/null
+++ b/drivers/usb/host/fhci-hub.c
@@ -0,0 +1,345 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* virtual root hub specific descriptor */
+static u8 root_hub_des[] = {
+	0x09, /* blength */
+	0x29, /* bDescriptorType;hub-descriptor */
+	0x01, /* bNbrPorts */
+	0x00, /* wHubCharacteristics */
+	0x00,
+	0x01, /* bPwrOn2pwrGood;2ms */
+	0x00, /* bHubContrCurrent;0mA */
+	0x00, /* DeviceRemoveable */
+	0xff, /* PortPwrCtrlMask */
+};
+
+static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on)
+{
+	int gpio = fhci->gpios[gpio_nr];
+	bool alow = fhci->alow_gpios[gpio_nr];
+
+	if (!gpio_is_valid(gpio))
+		return;
+
+	gpio_set_value(gpio, on ^ alow);
+	mdelay(5);
+}
+
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			     enum fhci_port_status status)
+{
+	fhci_dbg(fhci, "-> %s: %d\n", __func__, status);
+
+	switch (status) {
+	case FHCI_PORT_POWER_OFF:
+		fhci_gpio_set_value(fhci, GPIO_POWER, false);
+		break;
+	case FHCI_PORT_DISABLED:
+	case FHCI_PORT_WAITING:
+		fhci_gpio_set_value(fhci, GPIO_POWER, true);
+		break;
+	case FHCI_PORT_LOW:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, false);
+		break;
+	case FHCI_PORT_FULL:
+		fhci_gpio_set_value(fhci, GPIO_SPEED, true);
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	fhci_dbg(fhci, "<- %s: %d\n", __func__, status);
+}
+
+/* disable the USB port by clearing the EN bit in the USBMOD register */
+void fhci_port_disable(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld;
+	enum fhci_port_status port_status;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+
+	fhci_flush_all_transmissions(usb);
+
+	fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld);
+	port_status = usb->port_status;
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	/* check if during the disconnection process attached new device */
+	if (port_status == FHCI_PORT_WAITING)
+		fhci_device_connected_interrupt(fhci);
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+	fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* enable the USB port by setting the EN bit in the USBMOD register */
+void fhci_port_enable(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_config_transceiver(fhci, usb->port_status);
+
+	if ((usb->port_status != FHCI_PORT_FULL) &&
+			(usb->port_status != FHCI_PORT_LOW))
+		fhci_start_sof_timer(fhci);
+
+	usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE;
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci)
+{
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	gpio_direction_output(fhci->gpios[GPIO_USBOE], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTP], 0);
+	gpio_direction_output(fhci->gpios[GPIO_USBTN], 0);
+
+	mdelay(5);
+
+	qe_pin_set_dedicated(fhci->pins[PIN_USBOE]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTP]);
+	qe_pin_set_dedicated(fhci->pins[PIN_USBTN]);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* generate the RESET condition on the bus */
+void fhci_port_reset(void *lld)
+{
+	struct fhci_usb *usb = (struct fhci_usb *)lld;
+	struct fhci_hcd *fhci = usb->fhci;
+	u8 mode;
+	u16 mask;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_stop_sof_timer(fhci);
+	/* disable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN));
+
+	/* disable idle interrupts */
+	mask = in_be16(&fhci->regs->usb_mask);
+	out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK));
+
+	fhci_io_port_generate_reset(fhci);
+
+	/* enable interrupt on this endpoint */
+	out_be16(&fhci->regs->usb_mask, mask);
+
+	/* enable the USB controller */
+	mode = in_8(&fhci->regs->usb_mod);
+	out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN);
+	fhci_start_sof_timer(fhci);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int ret = 0;
+	unsigned long flags;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION |
+			USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND |
+			USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) {
+		*buf = 1 << 1;
+		ret = 1;
+		fhci_dbg(fhci, "-- %s\n", __func__);
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	return ret;
+}
+
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+			    u16 wIndex, char *buf, u16 wLength)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	int retval = 0;
+	int len = 0;
+	struct usb_hub_status *hub_status;
+	struct usb_port_status *port_status;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	switch (typeReq) {
+	case ClearHubFeature:
+		switch (wValue) {
+		case C_HUB_LOCAL_POWER:
+		case C_HUB_OVER_CURRENT:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case ClearPortFeature:
+		fhci->vroot_hub->feature &= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_ENABLE;
+			fhci_port_disable(fhci);
+			break;
+		case USB_PORT_FEAT_C_ENABLE:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_ENABLE;
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_C_SUSPEND:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_SUSPEND;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_CONNECTION;
+			break;
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_OVERCURRENT;
+			break;
+		case USB_PORT_FEAT_C_RESET:
+			fhci->vroot_hub->port.wPortChange &=
+			    ~USB_PORT_STAT_C_RESET;
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case GetHubDescriptor:
+		memcpy(buf, root_hub_des, sizeof(root_hub_des));
+		buf[3] = 0x11; /* per-port power, no ovrcrnt */
+		len = (buf[0] < wLength) ? buf[0] : wLength;
+		break;
+	case GetHubStatus:
+		hub_status = (struct usb_hub_status *)buf;
+		hub_status->wHubStatus =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubStatus);
+		hub_status->wHubChange =
+		    cpu_to_le16(fhci->vroot_hub->hub.wHubChange);
+		len = 4;
+		break;
+	case GetPortStatus:
+		port_status = (struct usb_port_status *)buf;
+		port_status->wPortStatus =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortStatus);
+		port_status->wPortChange =
+		    cpu_to_le16(fhci->vroot_hub->port.wPortChange);
+		len = 4;
+		break;
+	case SetHubFeature:
+		switch (wValue) {
+		case C_HUB_OVER_CURRENT:
+		case C_HUB_LOCAL_POWER:
+			break;
+		default:
+			goto error;
+		}
+		break;
+	case SetPortFeature:
+		fhci->vroot_hub->feature |= (1 << wValue);
+
+		switch (wValue) {
+		case USB_PORT_FEAT_ENABLE:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci_port_enable(fhci->usb_lld);
+			break;
+		case USB_PORT_FEAT_SUSPEND:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_SUSPEND;
+			fhci_stop_sof_timer(fhci);
+			break;
+		case USB_PORT_FEAT_RESET:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_RESET;
+			fhci_port_reset(fhci->usb_lld);
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_ENABLE;
+			fhci->vroot_hub->port.wPortStatus &=
+			    ~USB_PORT_STAT_RESET;
+			break;
+		case USB_PORT_FEAT_POWER:
+			fhci->vroot_hub->port.wPortStatus |=
+			    USB_PORT_STAT_POWER;
+			fhci_config_transceiver(fhci, FHCI_PORT_WAITING);
+			break;
+		default:
+			goto error;
+		}
+		break;
+	default:
+error:
+		retval = -EPIPE;
+	}
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return retval;
+}
diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c
new file mode 100644
index 0000000..2c0736c
--- /dev/null
+++ b/drivers/usb/host/fhci-mem.c
@@ -0,0 +1,113 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void init_td(struct td *td)
+{
+	memset(td, 0, sizeof(*td));
+	INIT_LIST_HEAD(&td->node);
+	INIT_LIST_HEAD(&td->frame_lh);
+}
+
+static void init_ed(struct ed *ed)
+{
+	memset(ed, 0, sizeof(*ed));
+	INIT_LIST_HEAD(&ed->td_list);
+	INIT_LIST_HEAD(&ed->node);
+}
+
+static struct td *get_empty_td(struct fhci_hcd *fhci)
+{
+	struct td *td;
+
+	if (!list_empty(&fhci->empty_tds)) {
+		td = list_entry(fhci->empty_tds.next, struct td, node);
+		list_del(fhci->empty_tds.next);
+	} else {
+		td = kmalloc(sizeof(*td), GFP_ATOMIC);
+		if (!td)
+			fhci_err(fhci, "No memory to allocate to TD\n");
+		else
+			init_td(td);
+	}
+
+	return td;
+}
+
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td)
+{
+	init_td(td);
+	list_add(&td->node, &fhci->empty_tds);
+}
+
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci)
+{
+	struct ed *ed;
+
+	if (!list_empty(&fhci->empty_eds)) {
+		ed = list_entry(fhci->empty_eds.next, struct ed, node);
+		list_del(fhci->empty_eds.next);
+	} else {
+		ed = kmalloc(sizeof(*ed), GFP_ATOMIC);
+		if (!ed)
+			fhci_err(fhci, "No memory to allocate to ED\n");
+		else
+			init_ed(ed);
+	}
+
+	return ed;
+}
+
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed)
+{
+	init_ed(ed);
+	list_add(&ed->node, &fhci->empty_eds);
+}
+
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc)
+{
+	struct td *td = get_empty_td(fhci);
+
+	if (!td)
+		return NULL;
+
+	td->urb = urb;
+	td->ed = ed;
+	td->type = type;
+	td->toggle = toggle;
+	td->data = data;
+	td->len = len;
+	td->iso_index = index;
+	td->interval = interval;
+	td->start_frame = start_frame;
+	td->ioc = ioc;
+	td->status = USB_TD_OK;
+
+	urb_priv->tds[index] = td;
+
+	return td;
+}
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
new file mode 100644
index 0000000..b0a1446
--- /dev/null
+++ b/drivers/usb/host/fhci-q.c
@@ -0,0 +1,284 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+/* maps the hardware error code to the USB error code */
+static int status_to_error(u32 status)
+{
+	if (status == USB_TD_OK)
+		return 0;
+	else if (status & USB_TD_RX_ER_CRC)
+		return -EILSEQ;
+	else if (status & USB_TD_RX_ER_NONOCT)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_OVERUN)
+		return -ECOMM;
+	else if (status & USB_TD_RX_ER_BITSTUFF)
+		return -EPROTO;
+	else if (status & USB_TD_RX_ER_PID)
+		return -EILSEQ;
+	else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT))
+		return -ETIMEDOUT;
+	else if (status & USB_TD_TX_ER_STALL)
+		return -EPIPE;
+	else if (status & USB_TD_TX_ER_UNDERUN)
+		return -ENOSR;
+	else if (status & USB_TD_RX_DATA_UNDERUN)
+		return -EREMOTEIO;
+	else if (status & USB_TD_RX_DATA_OVERUN)
+		return -EOVERFLOW;
+	else
+		return -EINVAL;
+}
+
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td)
+{
+	list_add_tail(&td->frame_lh, &frame->tds_list);
+}
+
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number)
+{
+	int i;
+
+	for (i = 0; i < number; i++) {
+		struct td *td = td_list[i];
+		list_add_tail(&td->node, &ed->td_list);
+	}
+	if (ed->td_head == NULL)
+		ed->td_head = td_list[0];
+}
+
+static struct td *peek_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list))
+		td = list_entry(ed->td_list.next, struct td, node);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list)) {
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+		list_del_init(frame->tds_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame)
+{
+	struct td *td;
+
+	if (!list_empty(&frame->tds_list))
+		td = list_entry(frame->tds_list.next, struct td, frame_lh);
+	else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_ed(struct ed *ed)
+{
+	struct td *td;
+
+	if (!list_empty(&ed->td_list)) {
+		td = list_entry(ed->td_list.next, struct td, node);
+		list_del_init(ed->td_list.next);
+
+		/* if this TD was the ED's head, find next TD */
+		if (!list_empty(&ed->td_list))
+			ed->td_head = list_entry(ed->td_list.next, struct td,
+						 node);
+		else
+			ed->td_head = NULL;
+	} else
+		td = NULL;
+
+	return td;
+}
+
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list)
+{
+	struct td *td;
+
+	if (!list_empty(&p_list->done_list)) {
+		td = list_entry(p_list->done_list.next, struct td, node);
+		list_del_init(p_list->done_list.next);
+	} else
+		td = NULL;
+
+	return td;
+}
+
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed)
+{
+	struct td *td;
+
+	td = ed->td_head;
+	list_del_init(&td->node);
+
+	/* If this TD was the ED's head,find next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else {
+		ed->td_head = NULL;
+		ed->state = FHCI_ED_SKIP;
+	}
+	ed->toggle_carry = td->toggle;
+	list_add_tail(&td->node, &usb->hc_list->done_list);
+	if (td->ioc)
+		usb->transfer_confirm(usb->fhci);
+}
+
+/* free done FHCI URB resource such as ED and TD */
+static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb)
+{
+	int i;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	struct ed *ed = urb_priv->ed;
+
+	for (i = 0; i < urb_priv->num_of_tds; i++) {
+		list_del_init(&urb_priv->tds[i]->node);
+		fhci_recycle_empty_td(fhci, urb_priv->tds[i]);
+	}
+
+	/* if this TD was the ED's head,find the next TD */
+	if (!list_empty(&ed->td_list))
+		ed->td_head = list_entry(ed->td_list.next, struct td, node);
+	else
+		ed->td_head = NULL;
+
+	kfree(urb_priv->tds);
+	kfree(urb_priv);
+	urb->hcpriv = NULL;
+
+	/* if this TD was the ED's head,find next TD */
+	if (ed->td_head == NULL)
+		list_del_init(&ed->node);
+	fhci->active_urbs--;
+}
+
+/* this routine called to complete and free done URB */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
+{
+	free_urb_priv(fhci, urb);
+
+	if (urb->status == -EINPROGRESS) {
+		if (urb->actual_length != urb->transfer_buffer_length &&
+				urb->transfer_flags & URB_SHORT_NOT_OK)
+			urb->status = -EREMOTEIO;
+		else
+			urb->status = 0;
+	}
+
+	usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb);
+
+	spin_unlock(&fhci->lock);
+
+	usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status);
+
+	spin_lock(&fhci->lock);
+}
+
+/*
+ * caculate transfer length/stats and update the urb
+ * Precondition: irqsafe(only for urb-?status locking)
+ */
+void fhci_done_td(struct urb *urb, struct td *td)
+{
+	struct ed *ed = td->ed;
+	u32 cc = td->status;
+
+	/* ISO...drivers see per-TD length/status */
+	if (ed->mode == FHCI_TF_ISO) {
+		u32 len;
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK &&
+				cc == USB_TD_RX_DATA_UNDERUN))
+			cc = USB_TD_OK;
+
+		if (usb_pipeout(urb->pipe))
+			len = urb->iso_frame_desc[td->iso_index].length;
+		else
+			len = td->actual_len;
+
+		urb->actual_length += len;
+		urb->iso_frame_desc[td->iso_index].actual_length = len;
+		urb->iso_frame_desc[td->iso_index].status =
+			status_to_error(cc);
+	}
+
+	/* BULK,INT,CONTROL... drivers see aggregate length/status,
+	 * except that "setup" bytes aren't counted and "short" transfers
+	 * might not be reported as errors.
+	 */
+	else {
+		if (td->error_cnt >= 3)
+			urb->error_count = 3;
+
+		/* control endpoint only have soft stalls */
+
+		/* update packet status if needed(short may be ok) */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK) &&
+				cc == USB_TD_RX_DATA_UNDERUN) {
+			ed->state = FHCI_ED_OPER;
+			cc = USB_TD_OK;
+		}
+		if (cc != USB_TD_OK) {
+			if (urb->status == -EINPROGRESS)
+				urb->status = status_to_error(cc);
+		}
+
+		/* count all non-empty packets except control SETUP packet */
+		if (td->type != FHCI_TA_SETUP || td->iso_index != 0)
+			urb->actual_length += td->actual_len;
+	}
+}
+
+/* there are some pedning request to unlink */
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed)
+{
+	struct td *td = peek_td_from_ed(ed);
+	struct urb *urb = td->urb;
+	struct urb_priv *urb_priv = urb->hcpriv;
+
+	if (urb_priv->state == URB_DEL) {
+		td = fhci_remove_td_from_ed(ed);
+		/* HC may have partly processed this TD */
+		if (td->status != USB_TD_INPROGRESS)
+			fhci_done_td(urb, td);
+
+		/* URB is done;clean up */
+		if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds)
+			fhci_urb_complete_free(fhci, urb);
+	}
+}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
new file mode 100644
index 0000000..bb63b68
--- /dev/null
+++ b/drivers/usb/host/fhci-sched.c
@@ -0,0 +1,888 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include <asm/fsl_gtm.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+static void recycle_frame(struct fhci_usb *usb, struct packet *pkt)
+{
+	pkt->data = NULL;
+	pkt->len = 0;
+	pkt->status = USB_TD_OK;
+	pkt->info = 0;
+	pkt->priv_data = NULL;
+
+	cq_put(usb->ep0->empty_frame_Q, pkt);
+}
+
+/* confirm submitted packet */
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt)
+{
+	struct td *td;
+	struct packet *td_pkt;
+	struct ed *ed;
+	u32 trans_len;
+	bool td_done = false;
+
+	td = fhci_remove_td_from_frame(usb->actual_frame);
+	td_pkt = td->pkt;
+	trans_len = pkt->len;
+	td->status = pkt->status;
+	if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) {
+		if ((td->data + td->actual_len) && trans_len)
+			memcpy(td->data + td->actual_len, pkt->data,
+			       trans_len);
+		cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+	}
+
+	recycle_frame(usb, pkt);
+
+	ed = td->ed;
+	if (ed->mode == FHCI_TF_ISO) {
+		if (ed->td_list.next->next != &ed->td_list) {
+			struct td *td_next =
+			    list_entry(ed->td_list.next->next, struct td,
+				       node);
+
+			td_next->start_frame = usb->actual_frame->frame_num;
+		}
+		td->actual_len = trans_len;
+		td_done = true;
+	} else if ((td->status & USB_TD_ERROR) &&
+			!(td->status & USB_TD_TX_ER_NAK)) {
+		/*
+		 * There was an error on the transaction (but not NAK).
+		 * If it is fatal error (data underrun, stall, bad pid or 3
+		 * errors exceeded), mark this TD as done.
+		 */
+		if ((td->status & USB_TD_RX_DATA_UNDERUN) ||
+				(td->status & USB_TD_TX_ER_STALL) ||
+				(td->status & USB_TD_RX_ER_PID) ||
+				(++td->error_cnt >= 3)) {
+			ed->state = FHCI_ED_HALTED;
+			td_done = true;
+
+			if (td->status & USB_TD_RX_DATA_UNDERUN) {
+				fhci_dbg(usb->fhci, "td err fu\n");
+				td->toggle = !td->toggle;
+				td->actual_len += trans_len;
+			} else {
+				fhci_dbg(usb->fhci, "td err f!u\n");
+			}
+		} else {
+			fhci_dbg(usb->fhci, "td err !f\n");
+			/* it is not a fatal error -retry this transaction */
+			td->nak_cnt = 0;
+			td->error_cnt++;
+			td->status = USB_TD_OK;
+		}
+	} else if (td->status & USB_TD_TX_ER_NAK) {
+		/* there was a NAK response */
+		fhci_vdbg(usb->fhci, "td nack\n");
+		td->nak_cnt++;
+		td->error_cnt = 0;
+		td->status = USB_TD_OK;
+	} else {
+		/* there was no error on transaction */
+		td->error_cnt = 0;
+		td->nak_cnt = 0;
+		td->toggle = !td->toggle;
+		td->actual_len += trans_len;
+
+		if (td->len == td->actual_len)
+			td_done = true;
+	}
+
+	if (td_done)
+		fhci_move_td_from_ed_to_done_list(usb, ed);
+}
+
+/*
+ * Flush all transmitted packets from BDs
+ * This routine is called when disabling the USB port to flush all
+ * transmissions that are allready scheduled in the BDs
+ */
+void fhci_flush_all_transmissions(struct fhci_usb *usb)
+{
+	u8 mode;
+	struct td *td;
+
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN);
+
+	fhci_flush_bds(usb);
+
+	while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) {
+		struct packet *pkt = td->pkt;
+
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		fhci_transaction_confirm(usb, pkt);
+	}
+
+	usb->actual_frame->frame_status = FRAME_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/*
+ * This function forms the packet and transmit the packet. This function
+ * will handle all endpoint type:ISO,interrupt,control and bulk
+ */
+static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td)
+{
+	u32 fw_transaction_time, len = 0;
+	struct packet *pkt;
+	u8 *data = NULL;
+
+	/* calcalate data address,len and toggle and then add the transaction */
+	if (td->toggle == USB_TD_TOGGLE_CARRY)
+		td->toggle = ed->toggle_carry;
+
+	switch (ed->mode) {
+	case FHCI_TF_ISO:
+		len = td->len;
+		if (td->type != FHCI_TA_IN)
+			data = td->data;
+		break;
+	case FHCI_TF_CTRL:
+	case FHCI_TF_BULK:
+		len = min(td->len - td->actual_len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((len + td->actual_len) == td->len)))
+			data = td->data + td->actual_len;
+		break;
+	case FHCI_TF_INTR:
+		len = min(td->len, ed->max_pkt_size);
+		if (!((td->type == FHCI_TA_IN) &&
+		      ((td->len + CRC_SIZE) >= ed->max_pkt_size)))
+			data = td->data;
+		break;
+	default:
+		break;
+	}
+
+	if (usb->port_status == FHCI_PORT_FULL)
+		fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4);
+	else
+		fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6);
+
+	/* check if there's enough space in this frame to submit this TD */
+	if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >=
+			usb->max_bytes_per_frame) {
+		fhci_vdbg(usb->fhci, "not enough space in this frame: "
+			  "%d %d %d\n", usb->actual_frame->total_bytes, len,
+			  usb->max_bytes_per_frame);
+		return -1;
+	}
+
+	/* check if there's enough time in this frame to submit this TD */
+	if (usb->actual_frame->frame_status != FRAME_IS_PREPARED &&
+	    (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION ||
+	     (fw_transaction_time + usb->sw_transaction_time >=
+	      1000 - fhci_get_sof_timer_count(usb)))) {
+		fhci_dbg(usb->fhci, "not enough time in this frame\n");
+		return -1;
+	}
+
+	/* update frame object fields before transmitting */
+	pkt = cq_get(usb->ep0->empty_frame_Q);
+	if (!pkt) {
+		fhci_dbg(usb->fhci, "there is no empty frame\n");
+		return -1;
+	}
+	td->pkt = pkt;
+
+	pkt->info = 0;
+	if (data == NULL) {
+		data = cq_get(usb->ep0->dummy_packets_Q);
+		BUG_ON(!data);
+		pkt->info = PKT_DUMMY_PACKET;
+	}
+	pkt->data = data;
+	pkt->len = len;
+	pkt->status = USB_TD_OK;
+	/* update TD status field before transmitting */
+	td->status = USB_TD_INPROGRESS;
+	/* update actual frame time object with the actual transmission */
+	usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD);
+	fhci_add_td_to_frame(usb->actual_frame, td);
+
+	if (usb->port_status != FHCI_PORT_FULL &&
+			usb->port_status != FHCI_PORT_LOW) {
+		pkt->status = USB_TD_TX_ER_TIMEOUT;
+		pkt->len = 0;
+		fhci_transaction_confirm(usb, pkt);
+	} else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr,
+			ed->ep_addr, ed->mode, ed->speed, td->toggle)) {
+		/* remove TD from actual frame */
+		list_del_init(&td->frame_lh);
+		td->status = USB_TD_OK;
+		if (pkt->info & PKT_DUMMY_PACKET)
+			cq_put(usb->ep0->dummy_packets_Q, pkt->data);
+		recycle_frame(usb, pkt);
+		usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD);
+		fhci_err(usb->fhci, "host transaction failed\n");
+		return -1;
+	}
+
+	return len;
+}
+
+static void move_head_to_tail(struct list_head *list)
+{
+	struct list_head *node = list->next;
+
+	if (!list_empty(list)) {
+		list_del(node);
+		list_add_tail(node, list);
+	}
+}
+
+/*
+ * This function goes through the endpoint list and schedules the
+ * transactions within this list
+ */
+static int scan_ed_list(struct fhci_usb *usb,
+			struct list_head *list, enum fhci_tf_mode list_type)
+{
+	static const int frame_part[4] = {
+		[FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME *
+				 MAX_PERIODIC_FRAME_USAGE) / 100,
+		[FHCI_TF_BULK] = MAX_BYTES_PER_FRAME,
+		[FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME *
+				  MAX_PERIODIC_FRAME_USAGE) / 100
+	};
+	struct ed *ed;
+	struct td *td;
+	int ans = 1;
+	u32 save_transaction_time = usb->sw_transaction_time;
+
+	list_for_each_entry(ed, list, node) {
+		td = ed->td_head;
+
+		if (!td || (td && td->status == USB_TD_INPROGRESS))
+			continue;
+
+		if (ed->state != FHCI_ED_OPER) {
+			if (ed->state == FHCI_ED_URB_DEL) {
+				td->status = USB_TD_OK;
+				fhci_move_td_from_ed_to_done_list(usb, ed);
+				ed->state = FHCI_ED_SKIP;
+			}
+			continue;
+		}
+
+		/*
+		 * if it isn't interrupt pipe or it is not iso pipe and the
+		 * interval time passed
+		 */
+		if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) &&
+				(((usb->actual_frame->frame_num -
+				   td->start_frame) & 0x7ff) < td->interval))
+			continue;
+
+		if (add_packet(usb, ed, td) < 0)
+			continue;
+
+		/* update time stamps in the TD */
+		td->start_frame = usb->actual_frame->frame_num;
+		usb->sw_transaction_time += save_transaction_time;
+
+		if (usb->actual_frame->total_bytes >=
+					usb->max_bytes_per_frame) {
+			usb->actual_frame->frame_status =
+				FRAME_DATA_END_TRANSMISSION;
+			fhci_push_dummy_bd(usb->ep0);
+			ans = 0;
+			break;
+		}
+
+		if (usb->actual_frame->total_bytes >= frame_part[list_type])
+			break;
+	}
+
+	/* be fair to each ED(move list head around) */
+	move_head_to_tail(list);
+	usb->sw_transaction_time = save_transaction_time;
+
+	return ans;
+}
+
+static u32 rotate_frames(struct fhci_usb *usb)
+{
+	struct fhci_hcd *fhci = usb->fhci;
+
+	if (!list_empty(&usb->actual_frame->tds_list)) {
+		if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) -
+		      usb->actual_frame->frame_num) & 0x7ff) > 5)
+			fhci_flush_actual_frame(usb);
+		else
+			return -EINVAL;
+	}
+
+	usb->actual_frame->frame_status = FRAME_IS_PREPARED;
+	usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff;
+	usb->actual_frame->total_bytes = 0;
+
+	return 0;
+}
+
+/*
+ * This function schedule the USB transaction and will process the
+ * endpoint in the following order: iso, interrupt, control and bulk.
+ */
+void fhci_schedule_transactions(struct fhci_usb *usb)
+{
+	int left = 1;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		if (rotate_frames(usb) != 0)
+			return;
+
+	if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)
+		return;
+
+	if (usb->actual_frame->total_bytes == 0) {
+		/*
+		 * schedule the next available ISO transfer
+		 *or next stage of the ISO transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO);
+
+		/*
+		 * schedule the next available interrupt transfer or
+		 * the next stage of the interrupt transfer
+		 */
+		scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR);
+
+		/*
+		 * schedule the next available control transfer
+		 * or the next stage of the control transfer
+		 */
+		left = scan_ed_list(usb, &usb->hc_list->ctrl_list,
+				    FHCI_TF_CTRL);
+	}
+
+	/*
+	 * schedule the next available bulk transfer or the next stage of the
+	 * bulk transfer
+	 */
+	if (left > 0)
+		scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK);
+}
+
+/* Handles SOF interrupt */
+static void sof_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	if ((usb->port_status == FHCI_PORT_DISABLED) &&
+	    (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) &&
+	    !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) {
+		if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED)
+			usb->port_status = FHCI_PORT_LOW;
+		else
+			usb->port_status = FHCI_PORT_FULL;
+		/* Disable IDLE */
+		usb->saved_msk &= ~USB_E_IDLE_MASK;
+		out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+	}
+
+	gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false);
+
+	fhci_host_transmit_actual_frame(usb);
+	usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED;
+
+	fhci_schedule_transactions(usb);
+}
+
+/* Handles device disconnected interrupt on port */
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci)
+{
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+	usb->port_status = FHCI_PORT_DISABLED;
+
+	fhci_stop_sof_timer(fhci);
+
+	/* Enable IDLE since we want to know if something comes along */
+	usb->saved_msk |= USB_E_IDLE_MASK;
+	out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk);
+
+	usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION;
+	usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION;
+	usb->max_bytes_per_frame = 0;
+	fhci_usb_enable_interrupt(usb);
+
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+/* detect a new device connected on the USB port */
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci)
+{
+
+	struct fhci_usb *usb = fhci->usb_lld;
+	int state;
+	int ret;
+
+	fhci_dbg(fhci, "-> %s\n", __func__);
+
+	fhci_usb_disable_interrupt(usb);
+	state = fhci_ioports_check_bus_state(fhci);
+
+	/* low-speed device was connected to the USB port */
+	if (state == 1) {
+		ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3);
+		if (ret) {
+			fhci_warn(fhci, "Low-Speed device is not supported, "
+				  "try use BRGx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_LOW;
+		setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus |=
+		    (USB_PORT_STAT_LOW_SPEED |
+		     USB_PORT_STAT_CONNECTION);
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame =
+		    (MAX_BYTES_PER_FRAME >> 3) - 7;
+		fhci_port_enable(usb);
+	} else if (state == 2) {
+		ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK);
+		if (ret) {
+			fhci_warn(fhci, "Full-Speed device is not supported, "
+				  "try use CLKx\n");
+			goto out;
+		}
+
+		usb->port_status = FHCI_PORT_FULL;
+		clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS);
+		usb->vroot_hub->port.wPortStatus &=
+		    ~USB_PORT_STAT_LOW_SPEED;
+		usb->vroot_hub->port.wPortStatus |=
+		    USB_PORT_STAT_CONNECTION;
+		usb->vroot_hub->port.wPortChange |=
+		    USB_PORT_STAT_C_CONNECTION;
+		usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15);
+		fhci_port_enable(usb);
+	}
+out:
+	fhci_usb_enable_interrupt(usb);
+	fhci_dbg(fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd)
+{
+	struct usb_hcd *hcd = _hcd;
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb = fhci->usb_lld;
+
+	spin_lock(&fhci->lock);
+
+	gtm_set_exact_timer16(fhci->timer, 1000, false);
+
+	if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) {
+		usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+		fhci_push_dummy_bd(usb->ep0);
+	}
+
+	fhci_schedule_transactions(usb);
+
+	spin_unlock(&fhci->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* Cancel transmission on the USB endpoint */
+static void abort_transmission(struct fhci_usb *usb)
+{
+	fhci_dbg(usb->fhci, "-> %s\n", __func__);
+	/* issue stop Tx command */
+	qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	/* flush Tx FIFOs */
+	out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO);
+	udelay(1000);
+	/* reset Tx BDs */
+	fhci_flush_bds(usb);
+	/* issue restart Tx command */
+	qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0);
+	fhci_dbg(usb->fhci, "<- %s\n", __func__);
+}
+
+irqreturn_t fhci_irq(struct usb_hcd *hcd)
+{
+	struct fhci_hcd *fhci = hcd_to_fhci(hcd);
+	struct fhci_usb *usb;
+	u16 usb_er = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fhci->lock, flags);
+
+	usb = fhci->usb_lld;
+
+	usb_er |= in_be16(&usb->fhci->regs->usb_event) &
+		  in_be16(&usb->fhci->regs->usb_mask);
+
+	/* clear event bits for next time */
+	out_be16(&usb->fhci->regs->usb_event, usb_er);
+
+	fhci_dbg_isr(fhci, usb_er);
+
+	if (usb_er & USB_E_RESET_MASK) {
+		if ((usb->port_status == FHCI_PORT_FULL) ||
+				(usb->port_status == FHCI_PORT_LOW)) {
+			fhci_device_disconnected_interrupt(fhci);
+			usb_er &= ~USB_E_IDLE_MASK;
+		} else if (usb->port_status == FHCI_PORT_WAITING) {
+			usb->port_status = FHCI_PORT_DISCONNECTING;
+
+			/* Turn on IDLE since we want to disconnect */
+			usb->saved_msk |= USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_event,
+				 usb->saved_msk);
+		} else if (usb->port_status == FHCI_PORT_DISABLED) {
+			if (fhci_ioports_check_bus_state(fhci) == 1 &&
+					usb->port_status != FHCI_PORT_LOW &&
+					usb->port_status != FHCI_PORT_FULL)
+				fhci_device_connected_interrupt(fhci);
+		}
+		usb_er &= ~USB_E_RESET_MASK;
+	}
+
+	if (usb_er & USB_E_MSF_MASK) {
+		abort_transmission(fhci->usb_lld);
+		usb_er &= ~USB_E_MSF_MASK;
+	}
+
+	if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) {
+		sof_interrupt(fhci);
+		usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK);
+	}
+
+	if (usb_er & USB_E_TXB_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXB_MASK;
+	}
+
+	if (usb_er & USB_E_TXE1_MASK) {
+		fhci_tx_conf_interrupt(fhci->usb_lld);
+		usb_er &= ~USB_E_TXE1_MASK;
+	}
+
+	if (usb_er & USB_E_IDLE_MASK) {
+		if (usb->port_status == FHCI_PORT_DISABLED &&
+				usb->port_status != FHCI_PORT_LOW &&
+				usb->port_status != FHCI_PORT_FULL) {
+			usb_er &= ~USB_E_RESET_MASK;
+			fhci_device_connected_interrupt(fhci);
+		} else if (usb->port_status ==
+				FHCI_PORT_DISCONNECTING) {
+			/* XXX usb->port_status = FHCI_PORT_WAITING; */
+			/* Disable IDLE */
+			usb->saved_msk &= ~USB_E_IDLE_MASK;
+			out_be16(&usb->fhci->regs->usb_mask,
+				 usb->saved_msk);
+		} else {
+			fhci_dbg_isr(fhci, -1);
+		}
+
+		usb_er &= ~USB_E_IDLE_MASK;
+	}
+
+	spin_unlock_irqrestore(&fhci->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Process normal completions(error or sucess) and clean the schedule.
+ *
+ * This is the main path for handing urbs back to drivers. The only other patth
+ * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
+ * the (re-reversed) done list as this does.
+ */
+static void process_done_list(unsigned long data)
+{
+	struct urb *urb;
+	struct ed *ed;
+	struct td *td;
+	struct urb_priv *urb_priv;
+	struct fhci_hcd *fhci = (struct fhci_hcd *)data;
+
+	disable_irq(fhci->timer->irq);
+	disable_irq(fhci_to_hcd(fhci)->irq);
+	spin_lock(&fhci->lock);
+
+	td = fhci_remove_td_from_done_list(fhci->hc_list);
+	while (td != NULL) {
+		urb = td->urb;
+		urb_priv = urb->hcpriv;
+		ed = td->ed;
+
+		/* update URB's length and status from TD */
+		fhci_done_td(urb, td);
+		urb_priv->tds_cnt++;
+
+		/*
+		 * if all this urb's TDs are done, call complete()
+		 * Interrupt transfers are the onley special case:
+		 * they are reissued,until "deleted" by usb_unlink_urb
+		 * (real work done in a SOF intr, by process_del_list)
+		 */
+		if (urb_priv->tds_cnt == urb_priv->num_of_tds) {
+			fhci_urb_complete_free(fhci, urb);
+		} else if (urb_priv->state == URB_DEL &&
+				ed->state == FHCI_ED_SKIP) {
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		} else if (ed->state == FHCI_ED_HALTED) {
+			urb_priv->state = URB_DEL;
+			ed->state = FHCI_ED_URB_DEL;
+			fhci_del_ed_list(fhci, ed);
+			ed->state = FHCI_ED_OPER;
+		}
+
+		td = fhci_remove_td_from_done_list(fhci->hc_list);
+	}
+
+	spin_unlock(&fhci->lock);
+	enable_irq(fhci->timer->irq);
+	enable_irq(fhci_to_hcd(fhci)->irq);
+}
+
+DECLARE_TASKLET(fhci_tasklet, process_done_list, 0);
+
+/* transfer complted callback */
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci)
+{
+	if (!fhci->process_done_task->state)
+		tasklet_schedule(fhci->process_done_task);
+	return 0;
+}
+
+/*
+ * adds urb to the endpoint descriptor list
+ * arguments:
+ * fhci		data structure for the Low level host controller
+ * ep		USB Host endpoint data structure
+ * urb		USB request block data structure
+ */
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb)
+{
+	struct ed *ed = urb->ep->hcpriv;
+	struct urb_priv *urb_priv = urb->hcpriv;
+	u32 data_len = urb->transfer_buffer_length;
+	int urb_state = 0;
+	int toggle = 0;
+	struct td *td;
+	u8 *data;
+	u16 cnt = 0;
+
+	if (ed == NULL) {
+		ed = fhci_get_empty_ed(fhci);
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->ep_addr = usb_pipeendpoint(urb->pipe);
+		switch (usb_pipetype(urb->pipe)) {
+		case PIPE_CONTROL:
+			ed->mode = FHCI_TF_CTRL;
+			break;
+		case PIPE_BULK:
+			ed->mode = FHCI_TF_BULK;
+			break;
+		case PIPE_INTERRUPT:
+			ed->mode = FHCI_TF_INTR;
+			break;
+		case PIPE_ISOCHRONOUS:
+			ed->mode = FHCI_TF_ISO;
+			break;
+		default:
+			break;
+		}
+		ed->speed = (urb->dev->speed == USB_SPEED_LOW) ?
+			FHCI_LOW_SPEED : FHCI_FULL_SPEED;
+		ed->max_pkt_size = usb_maxpacket(urb->dev,
+			urb->pipe, usb_pipeout(urb->pipe));
+		urb->ep->hcpriv = ed;
+		fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n",
+			 ed->speed, ed->max_pkt_size);
+	}
+
+	/* for ISO transfer calculate start frame index */
+	if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP)
+		urb->start_frame = ed->td_head ? ed->last_iso + 1 :
+						 get_frame_num(fhci);
+
+	/*
+	 * OHCI handles the DATA toggle itself,we just use the USB
+	 * toggle bits
+	 */
+	if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			  usb_pipeout(urb->pipe)))
+		toggle = USB_TD_TOGGLE_CARRY;
+	else {
+		toggle = USB_TD_TOGGLE_DATA0;
+		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
+			      usb_pipeout(urb->pipe), 1);
+	}
+
+	urb_priv->tds_cnt = 0;
+	urb_priv->ed = ed;
+	if (data_len > 0)
+		data = urb->transfer_buffer;
+	else
+		data = NULL;
+
+	switch (ed->mode) {
+	case FHCI_TF_BULK:
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				urb->transfer_buffer_length > 0 &&
+				((urb->transfer_buffer_length %
+				usb_maxpacket(urb->dev, urb->pipe,
+				usb_pipeout(urb->pipe))) == 0))
+			urb_state = US_BULK0;
+		while (data_len > 4096) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				cnt ? USB_TD_TOGGLE_CARRY :
+				      toggle,
+				data, 4096, 0, 0, true);
+			data += 4096;
+			data_len -= 4096;
+			cnt++;
+		}
+
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			cnt ? USB_TD_TOGGLE_CARRY : toggle,
+			data, data_len, 0, 0, true);
+		cnt++;
+
+		if (urb->transfer_flags & URB_ZERO_PACKET &&
+				cnt < urb_priv->num_of_tds) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true);
+			cnt++;
+		}
+		break;
+	case FHCI_TF_INTR:
+		urb->start_frame = get_frame_num(fhci) + 1;
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN,
+			USB_TD_TOGGLE_DATA0, data, data_len,
+			urb->interval, urb->start_frame, true);
+		break;
+	case FHCI_TF_CTRL:
+		ed->dev_addr = usb_pipedevice(urb->pipe);
+		ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe,
+			usb_pipeout(urb->pipe));
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP,
+			USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true);
+
+		if (data_len > 0) {
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA1, data, data_len, 0, 0,
+				true);
+		}
+		td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++,
+			usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT,
+			USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true);
+		urb_state = US_CTRL_SETUP;
+		break;
+	case FHCI_TF_ISO:
+		for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
+			u16 frame = urb->start_frame;
+
+			/*
+			 * FIXME scheduling should handle frame counter
+			 * roll-around ... exotic case (and OHCI has
+			 * a 2^16 iso range, vs other HCs max of 2^10)
+			 */
+			frame += cnt * urb->interval;
+			frame &= 0x07ff;
+			td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt,
+				usb_pipeout(urb->pipe) ? FHCI_TA_OUT :
+							 FHCI_TA_IN,
+				USB_TD_TOGGLE_DATA0,
+				data + urb->iso_frame_desc[cnt].offset,
+				urb->iso_frame_desc[cnt].length,
+				urb->interval, frame, true);
+		}
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * set the state of URB
+	 * control pipe:3 states -- setup,data,status
+	 * interrupt and bulk pipe:1 state -- data
+	 */
+	urb->pipe &= ~0x1f;
+	urb->pipe |= urb_state & 0x1f;
+
+	urb_priv->state = URB_INPROGRESS;
+
+	if (!ed->td_head) {
+		ed->state = FHCI_ED_OPER;
+		switch (ed->mode) {
+		case FHCI_TF_CTRL:
+			list_add(&ed->node, &fhci->hc_list->ctrl_list);
+			break;
+		case FHCI_TF_BULK:
+			list_add(&ed->node, &fhci->hc_list->bulk_list);
+			break;
+		case FHCI_TF_INTR:
+			list_add(&ed->node, &fhci->hc_list->intr_list);
+			break;
+		case FHCI_TF_ISO:
+			list_add(&ed->node, &fhci->hc_list->iso_list);
+			break;
+		default:
+			break;
+		}
+	}
+
+	fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds);
+	fhci->active_urbs++;
+}
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
new file mode 100644
index 0000000..b403322
--- /dev/null
+++ b/drivers/usb/host/fhci-tds.c
@@ -0,0 +1,626 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include "../core/hcd.h"
+#include "fhci.h"
+
+#define DUMMY_BD_BUFFER  0xdeadbeef
+#define DUMMY2_BD_BUFFER 0xbaadf00d
+
+/* Transaction Descriptors bits */
+#define TD_R		0x8000 /* ready bit */
+#define TD_W		0x2000 /* wrap bit */
+#define TD_I		0x1000 /* interrupt on completion */
+#define TD_L		0x0800 /* last */
+#define TD_TC		0x0400 /* transmit CRC */
+#define TD_CNF		0x0200 /* CNF - Must be always 1 */
+#define TD_LSP		0x0100 /* Low-speed transaction */
+#define TD_PID		0x00c0 /* packet id */
+#define TD_RXER		0x0020 /* Rx error or not */
+
+#define TD_NAK		0x0010 /* No ack. */
+#define TD_STAL		0x0008 /* Stall recieved */
+#define TD_TO		0x0004 /* time out */
+#define TD_UN		0x0002 /* underrun */
+#define TD_NO		0x0010 /* Rx Non Octet Aligned Packet */
+#define TD_AB		0x0008 /* Frame Aborted */
+#define TD_CR		0x0004 /* CRC Error */
+#define TD_OV		0x0002 /* Overrun */
+#define TD_BOV		0x0001 /* Buffer Overrun */
+
+#define TD_ERRORS	(TD_NAK | TD_STAL | TD_TO | TD_UN | \
+			 TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV)
+
+#define TD_PID_DATA0	0x0080 /* Data 0 toggle */
+#define TD_PID_DATA1	0x00c0 /* Data 1 toggle */
+#define TD_PID_TOGGLE	0x00c0 /* Data 0/1 toggle mask */
+
+#define TD_TOK_SETUP	0x0000
+#define TD_TOK_OUT	0x4000
+#define TD_TOK_IN	0x8000
+#define TD_ISO		0x1000
+#define TD_ENDP		0x0780
+#define TD_ADDR		0x007f
+
+#define TD_ENDP_SHIFT 7
+
+struct usb_td {
+	__be16 status;
+	__be16 length;
+	__be32 buf_ptr;
+	__be16 extra;
+	__be16 reserved;
+};
+
+static struct usb_td __iomem *next_bd(struct usb_td __iomem *base,
+				      struct usb_td __iomem *td,
+				      u16 status)
+{
+	if (status & TD_W)
+		return base;
+	else
+		return ++td;
+}
+
+void fhci_push_dummy_bd(struct endpoint *ep)
+{
+	if (ep->already_pushed_dummy_bd == false) {
+		u16 td_status = in_be16(&ep->empty_td->status);
+
+		out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
+		/* get the next TD in the ring */
+		ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+		ep->already_pushed_dummy_bd = true;
+	}
+}
+
+/* destroy an USB endpoint */
+void fhci_ep0_free(struct fhci_usb *usb)
+{
+	struct endpoint *ep;
+	int size;
+
+	ep = usb->ep0;
+	if (ep) {
+		if (ep->td_base)
+			cpm_muram_free(cpm_muram_offset(ep->td_base));
+
+		if (ep->conf_frame_Q) {
+			size = cq_howmany(ep->conf_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->conf_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->conf_frame_Q);
+		}
+
+		if (ep->empty_frame_Q) {
+			size = cq_howmany(ep->empty_frame_Q);
+			for (; size; size--) {
+				struct packet *pkt = cq_get(ep->empty_frame_Q);
+
+				kfree(pkt);
+			}
+			cq_delete(ep->empty_frame_Q);
+		}
+
+		if (ep->dummy_packets_Q) {
+			size = cq_howmany(ep->dummy_packets_Q);
+			for (; size; size--) {
+				u8 *buff = cq_get(ep->dummy_packets_Q);
+
+				kfree(buff);
+			}
+			cq_delete(ep->dummy_packets_Q);
+		}
+
+		kfree(ep);
+		usb->ep0 = NULL;
+	}
+}
+
+/*
+ * create the endpoint structure
+ *
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * data_mem	The data memory partition(BUS)
+ * ring_len	TD ring length
+ */
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+			   u32 ring_len)
+{
+	struct endpoint *ep;
+	struct usb_td __iomem *td;
+	unsigned long ep_offset;
+	char *err_for = "enpoint PRAM";
+	int ep_mem_size;
+	u32 i;
+
+	/* we need at least 3 TDs in the ring */
+	if (!(ring_len > 2)) {
+		fhci_err(usb->fhci, "illegal TD ring length parameters\n");
+		return -EINVAL;
+	}
+
+	ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+	if (!ep)
+		return -ENOMEM;
+
+	ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram);
+	ep_offset = cpm_muram_alloc(ep_mem_size, 32);
+	if (IS_ERR_VALUE(ep_offset))
+		goto err;
+	ep->td_base = cpm_muram_addr(ep_offset);
+
+	/* zero all queue pointers */
+	ep->conf_frame_Q = cq_new(ring_len + 2);
+	ep->empty_frame_Q = cq_new(ring_len + 2);
+	ep->dummy_packets_Q = cq_new(ring_len + 2);
+	if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) {
+		err_for = "frame_queues";
+		goto err;
+	}
+
+	for (i = 0; i < (ring_len + 1); i++) {
+		struct packet *pkt;
+		u8 *buff;
+
+		pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
+		if (!pkt) {
+			err_for = "frame";
+			goto err;
+		}
+
+		buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL);
+		if (!buff) {
+			kfree(pkt);
+			err_for = "buffer";
+			goto err;
+		}
+		cq_put(ep->empty_frame_Q, pkt);
+		cq_put(ep->dummy_packets_Q, buff);
+	}
+
+	/* we put the endpoint parameter RAM right behind the TD ring */
+	ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len;
+
+	ep->conf_td = ep->td_base;
+	ep->empty_td = ep->td_base;
+
+	ep->already_pushed_dummy_bd = false;
+
+	/* initialize tds */
+	td = ep->td_base;
+	for (i = 0; i < ring_len; i++) {
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	}
+	td--;
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+
+	/* endpoint structure has been created */
+	usb->ep0 = ep;
+
+	return 0;
+err:
+	fhci_ep0_free(usb);
+	kfree(ep);
+	fhci_err(usb->fhci, "no memory for the %s\n", err_for);
+	return -ENOMEM;
+}
+
+/*
+ * initialize the endpoint register according to the given parameters
+ *
+ * artuments:
+ * usb		A pointer to the data strucutre of the USB
+ * ep		A pointer to the endpoint structre
+ * data_mem	The data memory partition(BUS)
+ */
+void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem)
+{
+	u8 rt;
+
+	/* set the endpoint registers according to the endpoint */
+	out_be16(&usb->fhci->regs->usb_ep[0],
+		 USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE);
+	out_be16(&usb->fhci->pram->ep_ptr[0],
+		 cpm_muram_offset(ep->ep_pram_ptr));
+
+	rt = (BUS_MODE_BO_BE | BUS_MODE_GBL);
+#ifdef MULTI_DATA_BUS
+	if (data_mem == MEM_SECONDARY)
+		rt |= BUS_MODE_DTB;
+#endif
+	out_8(&ep->ep_pram_ptr->rx_func_code, rt);
+	out_8(&ep->ep_pram_ptr->tx_func_code, rt);
+	out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028);
+	out_be16(&ep->ep_pram_ptr->rx_base, 0);
+	out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base));
+	out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0);
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+}
+
+/*
+ * Collect the submitted frames and inform the application about them
+ * It is also prepearing the TDs for new frames. If the Tx interrupts
+ * are diabled, the application should call that routine to get
+ * confirmation about the submitted frames. Otherwise, the routine is
+ * called frome the interrupt service routine during the Tx interrupt.
+ * In that case the application is informed by calling the application
+ * specific 'fhci_transaction_confirm' routine
+ */
+static void fhci_td_transaction_confirm(struct fhci_usb *usb)
+{
+	struct endpoint *ep = usb->ep0;
+	struct packet *pkt;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+	u16 td_length;
+	u32 buf;
+
+	/*
+	 * collect transmitted BDs from the chip. The routine clears all BDs
+	 * with R bit = 0 and the pointer to data buffer is not NULL, that is
+	 * BDs which point to the transmitted data buffer
+	 */
+	while (1) {
+		td = ep->conf_td;
+		td_status = in_be16(&td->status);
+		td_length = in_be16(&td->length);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* check if the TD is empty */
+		if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf)))
+			break;
+		/* check if it is a dummy buffer */
+		else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W))
+			break;
+
+		/* mark TD as empty */
+		clrbits16(&td->status, ~TD_W);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		/* advance the TD pointer */
+		ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status);
+
+		/* check if it is a dummy buffer(type2) */
+		if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W))
+			continue;
+
+		pkt = cq_get(ep->conf_frame_Q);
+		if (!pkt)
+			fhci_err(usb->fhci, "no frame to confirm\n");
+
+		if (td_status & TD_ERRORS) {
+			if (td_status & TD_RXER) {
+				if (td_status & TD_CR)
+					pkt->status = USB_TD_RX_ER_CRC;
+				else if (td_status & TD_AB)
+					pkt->status = USB_TD_RX_ER_BITSTUFF;
+				else if (td_status & TD_OV)
+					pkt->status = USB_TD_RX_ER_OVERUN;
+				else if (td_status & TD_BOV)
+					pkt->status = USB_TD_RX_DATA_OVERUN;
+				else if (td_status & TD_NO)
+					pkt->status = USB_TD_RX_ER_NONOCT;
+				else
+					fhci_err(usb->fhci, "illegal error "
+						 "occured\n");
+			} else if (td_status & TD_NAK)
+				pkt->status = USB_TD_TX_ER_NAK;
+			else if (td_status & TD_TO)
+				pkt->status = USB_TD_TX_ER_TIMEOUT;
+			else if (td_status & TD_UN)
+				pkt->status = USB_TD_TX_ER_UNDERUN;
+			else if (td_status & TD_STAL)
+				pkt->status = USB_TD_TX_ER_STALL;
+			else
+				fhci_err(usb->fhci, "illegal error occured\n");
+		} else if ((extra_data & TD_TOK_IN) &&
+				pkt->len > td_length - CRC_SIZE) {
+			pkt->status = USB_TD_RX_DATA_UNDERUN;
+		}
+
+		if (extra_data & TD_TOK_IN)
+			pkt->len = td_length - CRC_SIZE;
+		else if (pkt->info & PKT_ZLP)
+			pkt->len = 0;
+		else
+			pkt->len = td_length;
+
+		fhci_transaction_confirm(usb, pkt);
+	}
+}
+
+/*
+ * Submitting a data frame to a specified endpoint of a USB device
+ * The frame is put in the driver's transmit queue for this endpoint
+ *
+ * Arguments:
+ * usb          A pointer to the USB structure
+ * pkt          A pointer to the user frame structure
+ * trans_type   Transaction tyep - IN,OUT or SETUP
+ * dest_addr    Device address - 0~127
+ * dest_ep      Endpoint number of the device - 0~16
+ * trans_mode   Pipe type - ISO,Interrupt,bulk or control
+ * dest_speed   USB speed - Low speed or FULL speed
+ * data_toggle  Data sequence toggle - 0 or 1
+ */
+u32 fhci_host_transaction(struct fhci_usb *usb,
+			  struct packet *pkt,
+			  enum fhci_ta_type trans_type,
+			  u8 dest_addr,
+			  u8 dest_ep,
+			  enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle)
+{
+	struct endpoint *ep = usb->ep0;
+	struct usb_td __iomem *td;
+	u16 extra_data;
+	u16 td_status;
+
+	fhci_usb_disable_interrupt(usb);
+	/* start from the next BD that should be filled */
+	td = ep->empty_td;
+	td_status = in_be16(&td->status);
+
+	if (td_status & TD_R && in_be16(&td->length)) {
+		/* if the TD is not free */
+		fhci_usb_enable_interrupt(usb);
+		return -1;
+	}
+
+	/* get the next TD in the ring */
+	ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status);
+	fhci_usb_enable_interrupt(usb);
+	pkt->priv_data = td;
+	out_be32(&td->buf_ptr, virt_to_phys(pkt->data));
+	/* sets up transaction parameters - addr,endp,dir,and type */
+	extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr;
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		extra_data |= TD_TOK_IN;
+		break;
+	case FHCI_TA_OUT:
+		extra_data |= TD_TOK_OUT;
+		break;
+	case FHCI_TA_SETUP:
+		extra_data |= TD_TOK_SETUP;
+		break;
+	}
+	if (trans_mode == FHCI_TF_ISO)
+		extra_data |= TD_ISO;
+	out_be16(&td->extra, extra_data);
+
+	/* sets up the buffer descriptor */
+	td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF);
+	if (!(pkt->info & PKT_NO_CRC))
+		td_status |= TD_TC;
+
+	switch (trans_type) {
+	case FHCI_TA_IN:
+		if (data_toggle)
+			pkt->info |= PKT_PID_DATA1;
+		else
+			pkt->info |= PKT_PID_DATA0;
+		break;
+	default:
+		if (data_toggle) {
+			td_status |= TD_PID_DATA1;
+			pkt->info |= PKT_PID_DATA1;
+		} else {
+			td_status |= TD_PID_DATA0;
+			pkt->info |= PKT_PID_DATA0;
+		}
+		break;
+	}
+
+	if ((dest_speed == FHCI_LOW_SPEED) &&
+	    (usb->port_status == FHCI_PORT_FULL))
+		td_status |= TD_LSP;
+
+	out_be16(&td->status, td_status);
+
+	/* set up buffer length */
+	if (trans_type == FHCI_TA_IN)
+		out_be16(&td->length, pkt->len + CRC_SIZE);
+	else
+		out_be16(&td->length, pkt->len);
+
+	/* put the frame to the confirmation queue */
+	cq_put(ep->conf_frame_Q, pkt);
+
+	if (cq_howmany(ep->conf_frame_Q) == 1)
+		out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+	return 0;
+}
+
+/* Reset the Tx BD ring */
+void fhci_flush_bds(struct fhci_usb *usb)
+{
+	u16 extra_data;
+	u16 td_status;
+	u32 buf;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	td = ep->td_base;
+	while (1) {
+		td_status = in_be16(&td->status);
+		buf = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+
+		/* if the TD is not empty - we'll confirm it as Timeout */
+		if (td_status & TD_R)
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		/* if this TD is dummy - let's skip this TD */
+		else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER)
+			out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER);
+		/* if this is the last TD - break */
+		if (td_status & TD_W)
+			break;
+
+		td++;
+	}
+
+	fhci_td_transaction_confirm(usb);
+
+	td = ep->td_base;
+	do {
+		out_be16(&td->status, 0);
+		out_be16(&td->length, 0);
+		out_be32(&td->buf_ptr, 0);
+		out_be16(&td->extra, 0);
+		td++;
+	} while (!(in_be16(&td->status) & TD_W));
+	out_be16(&td->status, TD_W); /* for last TD set Wrap bit */
+	out_be16(&td->length, 0);
+	out_be32(&td->buf_ptr, 0);
+	out_be16(&td->extra, 0);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+}
+
+/*
+ * Flush all transmitted packets from TDs in the actual frame.
+ * This routine is called when something wrong with the controller and
+ * we want to get rid of the actual frame and start again next frame
+ */
+void fhci_flush_actual_frame(struct fhci_usb *usb)
+{
+	u8 mode;
+	u16 tb_ptr;
+	u16 extra_data;
+	u16 td_status;
+	u32 buf_ptr;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	/* disable the USB controller */
+	mode = in_8(&usb->fhci->regs->usb_mod);
+	out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN);
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+	td_status = in_be16(&td->status);
+	buf_ptr = in_be32(&td->buf_ptr);
+	extra_data = in_be16(&td->extra);
+	do {
+		if (td_status & TD_R) {
+			out_be16(&td->status, (td_status & ~TD_R) | TD_TO);
+		} else {
+			out_be32(&td->buf_ptr, 0);
+			ep->already_pushed_dummy_bd = false;
+			break;
+		}
+
+		/* advance the TD pointer */
+		td = next_bd(ep->td_base, td, td_status);
+		td_status = in_be16(&td->status);
+		buf_ptr = in_be32(&td->buf_ptr);
+		extra_data = in_be16(&td->extra);
+	} while ((td_status & TD_R) || buf_ptr);
+
+	fhci_td_transaction_confirm(usb);
+
+	out_be16(&ep->ep_pram_ptr->tx_bd_ptr,
+		 in_be16(&ep->ep_pram_ptr->tx_base));
+	out_be32(&ep->ep_pram_ptr->tx_state, 0);
+	out_be16(&ep->ep_pram_ptr->tx_cnt, 0);
+	ep->empty_td = ep->td_base;
+	ep->conf_td = ep->td_base;
+
+	usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION;
+
+	/* reset the event register */
+	out_be16(&usb->fhci->regs->usb_event, 0xffff);
+	/* enable the USB controller */
+	out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN);
+}
+
+/* handles Tx confirm and Tx error interrupt */
+void fhci_tx_conf_interrupt(struct fhci_usb *usb)
+{
+	fhci_td_transaction_confirm(usb);
+
+	/*
+	 * Schedule another transaction to this frame only if we have
+	 * already confirmed all transaction in the frame.
+	 */
+	if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) ||
+	     (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) &&
+	    (list_empty(&usb->actual_frame->tds_list)))
+		fhci_schedule_transactions(usb);
+}
+
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb)
+{
+	u16 tb_ptr;
+	u16 td_status;
+	struct usb_td __iomem *td;
+	struct endpoint *ep = usb->ep0;
+
+	tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr);
+	td = cpm_muram_addr(tb_ptr);
+
+	if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) {
+		struct usb_td __iomem *old_td = td;
+
+		ep->already_pushed_dummy_bd = false;
+		td_status = in_be16(&td->status);
+		/* gets the next TD in the ring */
+		td = next_bd(ep->td_base, td, td_status);
+		tb_ptr = cpm_muram_offset(td);
+		out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr);
+
+		/* start transmit only if we have something in the TDs */
+		if (in_be16(&td->status) & TD_R)
+			out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO);
+
+		if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) {
+			out_be32(&old_td->buf_ptr, 0);
+			ep->conf_td = next_bd(ep->td_base, ep->conf_td,
+					      td_status);
+		} else {
+			out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER);
+		}
+	}
+}
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
new file mode 100644
index 0000000..7116284
--- /dev/null
+++ b/drivers/usb/host/fhci.h
@@ -0,0 +1,607 @@
+/*
+ * Freescale QUICC Engine USB Host Controller Driver
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) Logic Product Development, Inc. 2007
+ *               Peter Barada <peterb@logicpd.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __FHCI_H
+#define __FHCI_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/io.h>
+#include <linux/usb.h>
+#include <asm/qe.h>
+#include "../core/hcd.h"
+
+#define USB_CLOCK	48000000
+
+#define FHCI_PRAM_SIZE 0x100
+
+#define MAX_EDS		32
+#define MAX_TDS		32
+
+
+/* CRC16 field size */
+#define CRC_SIZE 2
+
+/* USB protocol overhead for each frame transmitted from the host */
+#define PROTOCOL_OVERHEAD 7
+
+/* Packet structure, info field */
+#define PKT_PID_DATA0		0x80000000 /* PID - Data toggle zero */
+#define PKT_PID_DATA1		0x40000000 /* PID - Data toggle one  */
+#define PKT_PID_SETUP		0x20000000 /* PID - Setup bit */
+#define PKT_SETUP_STATUS	0x10000000 /* Setup status bit */
+#define PKT_SETADDR_STATUS	0x08000000 /* Set address status bit */
+#define PKT_SET_HOST_LAST	0x04000000 /* Last data packet */
+#define PKT_HOST_DATA		0x02000000 /* Data packet */
+#define PKT_FIRST_IN_FRAME	0x01000000 /* First packet in the frame */
+#define PKT_TOKEN_FRAME		0x00800000 /* Token packet */
+#define PKT_ZLP			0x00400000 /* Zero length packet */
+#define PKT_IN_TOKEN_FRAME	0x00200000 /* IN token packet */
+#define PKT_OUT_TOKEN_FRAME	0x00100000 /* OUT token packet */
+#define PKT_SETUP_TOKEN_FRAME	0x00080000 /* SETUP token packet */
+#define PKT_STALL_FRAME		0x00040000 /* STALL packet */
+#define PKT_NACK_FRAME		0x00020000 /* NACK packet */
+#define PKT_NO_PID		0x00010000 /* No PID */
+#define PKT_NO_CRC		0x00008000 /* don't append CRC */
+#define PKT_HOST_COMMAND	0x00004000 /* Host command packet */
+#define PKT_DUMMY_PACKET	0x00002000 /* Dummy packet, used for mmm */
+#define PKT_LOW_SPEED_PACKET	0x00001000 /* Low-Speed packet */
+
+#define TRANS_OK		(0)
+#define TRANS_INPROGRESS	(-1)
+#define TRANS_DISCARD		(-2)
+#define TRANS_FAIL		(-3)
+
+#define PS_INT		0
+#define PS_DISCONNECTED	1
+#define PS_CONNECTED	2
+#define PS_READY	3
+#define PS_MISSING	4
+
+/* Transfer Descriptor status field */
+#define USB_TD_OK		0x00000000 /* TD transmited or received ok */
+#define USB_TD_INPROGRESS	0x80000000 /* TD is being transmitted */
+#define USB_TD_RX_ER_NONOCT	0x40000000 /* Tx Non Octet Aligned Packet */
+#define USB_TD_RX_ER_BITSTUFF	0x20000000 /* Frame Aborted-Received pkt */
+#define USB_TD_RX_ER_CRC	0x10000000 /* CRC error */
+#define USB_TD_RX_ER_OVERUN	0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_PID	0x04000000 /* wrong PID received */
+#define USB_TD_RX_DATA_UNDERUN	0x02000000 /* shorter than expected */
+#define USB_TD_RX_DATA_OVERUN	0x01000000 /* longer than expected */
+#define USB_TD_TX_ER_NAK	0x00800000 /* NAK handshake */
+#define USB_TD_TX_ER_STALL	0x00400000 /* STALL handshake */
+#define USB_TD_TX_ER_TIMEOUT	0x00200000 /* transmit time out */
+#define USB_TD_TX_ER_UNDERUN	0x00100000 /* transmit underrun */
+
+#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \
+		USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \
+		USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \
+		USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \
+		USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN)
+
+/* Transfer Descriptor toggle field */
+#define USB_TD_TOGGLE_DATA0	0
+#define USB_TD_TOGGLE_DATA1	1
+#define USB_TD_TOGGLE_CARRY	2
+
+/* #define MULTI_DATA_BUS */
+
+/* Bus mode register RBMR/TBMR */
+#define BUS_MODE_GBL	0x20	/* Global snooping */
+#define BUS_MODE_BO	0x18	/* Byte ordering */
+#define BUS_MODE_BO_BE	0x10	/* Byte ordering - Big-endian */
+#define BUS_MODE_DTB	0x02	/* Data bus */
+
+/* FHCI QE USB Register Description */
+
+/* USB Mode Register bit define */
+#define USB_MODE_EN		0x01
+#define USB_MODE_HOST		0x02
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SFTE		0x08
+#define USB_MODE_RESUME		0x40
+#define USB_MODE_LSS		0x80
+
+/* USB Slave Address Register Mask */
+#define USB_SLVADDR_MASK	0x7F
+
+/* USB Endpoint register define */
+#define USB_EPNUM_MASK		0xF000
+#define USB_EPNUM_SHIFT		12
+
+#define USB_TRANS_MODE_SHIFT	8
+#define USB_TRANS_CTR		0x0000
+#define USB_TRANS_INT		0x0100
+#define USB_TRANS_BULK		0x0200
+#define USB_TRANS_ISO		0x0300
+
+#define USB_EP_MF		0x0020
+#define USB_EP_RTE		0x0010
+
+#define USB_THS_SHIFT		2
+#define USB_THS_MASK		0x000c
+#define USB_THS_NORMAL		0x0
+#define USB_THS_IGNORE_IN	0x0004
+#define USB_THS_NACK		0x0008
+#define USB_THS_STALL		0x000c
+
+#define USB_RHS_SHIFT   	0
+#define USB_RHS_MASK		0x0003
+#define USB_RHS_NORMAL  	0x0
+#define USB_RHS_IGNORE_OUT	0x0001
+#define USB_RHS_NACK		0x0002
+#define USB_RHS_STALL		0x0003
+
+#define USB_RTHS_MASK		0x000f
+
+/* USB Command Register define */
+#define USB_CMD_STR_FIFO	0x80
+#define USB_CMD_FLUSH_FIFO	0x40
+#define USB_CMD_ISFT		0x20
+#define USB_CMD_DSFT		0x10
+#define USB_CMD_EP_MASK		0x03
+
+/* USB Event and Mask Register define */
+#define USB_E_MSF_MASK		0x0800
+#define USB_E_SFT_MASK		0x0400
+#define USB_E_RESET_MASK	0x0200
+#define USB_E_IDLE_MASK		0x0100
+#define USB_E_TXE4_MASK		0x0080
+#define USB_E_TXE3_MASK		0x0040
+#define USB_E_TXE2_MASK		0x0020
+#define USB_E_TXE1_MASK		0x0010
+#define USB_E_SOF_MASK		0x0008
+#define USB_E_BSY_MASK		0x0004
+#define USB_E_TXB_MASK		0x0002
+#define USB_E_RXB_MASK		0x0001
+
+/* Freescale USB Host controller registers */
+struct fhci_regs {
+	u8 usb_mod;		/* mode register */
+	u8 usb_addr;		/* address register */
+	u8 usb_comm;		/* command register */
+	u8 reserved1[1];
+	__be16 usb_ep[4];	/* endpoint register */
+	u8 reserved2[4];
+	__be16 usb_event;	/* event register */
+	u8 reserved3[2];
+	__be16 usb_mask;	/* mask register */
+	u8 reserved4[1];
+	u8 usb_status;		/* status register */
+	__be16 usb_sof_tmr;	/* Start Of Frame timer */
+	u8 reserved5[2];
+	__be16 usb_frame_num;	/* frame number register */
+	u8 reserved6[1];
+};
+
+/* Freescale USB HOST */
+struct fhci_pram {
+	__be16 ep_ptr[4];	/* Endpoint porter reg */
+	__be32 rx_state;	/* Rx internal state */
+	__be32 rx_ptr;		/* Rx internal data pointer */
+	__be16 frame_num;	/* Frame number */
+	__be16 rx_cnt;		/* Rx byte count */
+	__be32 rx_temp;		/* Rx temp */
+	__be32 rx_data_temp;	/* Rx data temp */
+	__be16 rx_u_ptr;	/* Rx microcode return address temp */
+	u8 reserved1[2];	/* reserved area */
+	__be32 sof_tbl;		/* SOF lookup table pointer */
+	u8 sof_u_crc_temp;	/* SOF micorcode CRC5 temp reg */
+	u8 reserved2[0xdb];
+};
+
+/* Freescale USB Endpoint*/
+struct fhci_ep_pram {
+	__be16 rx_base;		/* Rx BD base address */
+	__be16 tx_base;		/* Tx BD base address */
+	u8 rx_func_code;	/* Rx function code */
+	u8 tx_func_code;	/* Tx function code */
+	__be16 rx_buff_len;	/* Rx buffer length */
+	__be16 rx_bd_ptr;	/* Rx BD pointer */
+	__be16 tx_bd_ptr;	/* Tx BD pointer */
+	__be32 tx_state;	/* Tx internal state */
+	__be32 tx_ptr;		/* Tx internal data pointer */
+	__be16 tx_crc;		/* temp transmit CRC */
+	__be16 tx_cnt;		/* Tx byte count */
+	__be32 tx_temp;		/* Tx temp */
+	__be16 tx_u_ptr;	/* Tx microcode return address temp */
+	__be16 reserved;
+};
+
+struct fhci_controller_list {
+	struct list_head ctrl_list;	/* control endpoints */
+	struct list_head bulk_list;	/* bulk endpoints */
+	struct list_head iso_list;	/* isochronous endpoints */
+	struct list_head intr_list;	/* interruput endpoints */
+	struct list_head done_list;	/* done transfers */
+};
+
+struct virtual_root_hub {
+	int dev_num;	/* USB address of the root hub */
+	u32 feature;	/* indicates what feature has been set */
+	struct usb_hub_status hub;
+	struct usb_port_status port;
+};
+
+enum fhci_gpios {
+	GPIO_USBOE = 0,
+	GPIO_USBTP,
+	GPIO_USBTN,
+	GPIO_USBRP,
+	GPIO_USBRN,
+	/* these are optional */
+	GPIO_SPEED,
+	GPIO_POWER,
+	NUM_GPIOS,
+};
+
+enum fhci_pins {
+	PIN_USBOE = 0,
+	PIN_USBTP,
+	PIN_USBTN,
+	NUM_PINS,
+};
+
+struct fhci_hcd {
+	enum qe_clock fullspeed_clk;
+	enum qe_clock lowspeed_clk;
+	struct qe_pin *pins[NUM_PINS];
+	int gpios[NUM_GPIOS];
+	bool alow_gpios[NUM_GPIOS];
+
+	struct fhci_regs __iomem *regs;	/* I/O memory used to communicate */
+	struct fhci_pram __iomem *pram;	/* Parameter RAM */
+	struct gtm_timer *timer;
+
+	spinlock_t lock;
+	struct fhci_usb *usb_lld; /* Low-level driver */
+	struct virtual_root_hub *vroot_hub; /* the virtual root hub */
+	int active_urbs;
+	struct fhci_controller_list *hc_list;
+	struct tasklet_struct *process_done_task; /* tasklet for done list */
+
+	struct list_head empty_eds;
+	struct list_head empty_tds;
+
+#ifdef CONFIG_FHCI_DEBUG
+	int usb_irq_stat[13];
+	struct dentry *dfs_root;
+	struct dentry *dfs_regs;
+	struct dentry *dfs_irq_stat;
+#endif
+};
+
+#define USB_FRAME_USAGE 90
+#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10)	/* frame time usage */
+#define SW_FIX_TIME_BETWEEN_TRANSACTION 150	/* SW */
+#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15)
+#define MAX_PERIODIC_FRAME_USAGE 90
+
+/* transaction type */
+enum fhci_ta_type {
+	FHCI_TA_IN = 0,	/* input transaction */
+	FHCI_TA_OUT,	/* output transaction */
+	FHCI_TA_SETUP,	/* setup transaction */
+};
+
+/* transfer mode */
+enum fhci_tf_mode {
+	FHCI_TF_CTRL = 0,
+	FHCI_TF_ISO,
+	FHCI_TF_BULK,
+	FHCI_TF_INTR,
+};
+
+enum fhci_speed {
+	FHCI_FULL_SPEED,
+	FHCI_LOW_SPEED,
+};
+
+/* endpoint state */
+enum fhci_ed_state {
+	FHCI_ED_NEW = 0, /* pipe is new */
+	FHCI_ED_OPER,    /* pipe is operating */
+	FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */
+	FHCI_ED_SKIP,    /* skip this pipe */
+	FHCI_ED_HALTED,  /* pipe is halted */
+};
+
+enum fhci_port_status {
+	FHCI_PORT_POWER_OFF = 0,
+	FHCI_PORT_DISABLED,
+	FHCI_PORT_DISCONNECTING,
+	FHCI_PORT_WAITING,	/* waiting for connection */
+	FHCI_PORT_FULL,		/* full speed connected */
+	FHCI_PORT_LOW,		/* low speed connected */
+};
+
+enum fhci_mem_alloc {
+	MEM_CACHABLE_SYS = 0x00000001,	/* primary DDR,cachable */
+	MEM_NOCACHE_SYS = 0x00000004,	/* primary DDR,non-cachable */
+	MEM_SECONDARY = 0x00000002,	/* either secondary DDR or SDRAM */
+	MEM_PRAM = 0x00000008,		/* multi-user RAM identifier */
+};
+
+/* USB default parameters*/
+#define DEFAULT_RING_LEN	8
+#define DEFAULT_DATA_MEM	MEM_CACHABLE_SYS
+
+struct ed {
+	u8 dev_addr;		/* device address */
+	u8 ep_addr;		/* endpoint address */
+	enum fhci_tf_mode mode;	/* USB transfer mode */
+	enum fhci_speed speed;
+	unsigned int max_pkt_size;
+	enum fhci_ed_state state;
+	struct list_head td_list; /* a list of all queued TD to this pipe */
+	struct list_head node;
+
+	/* read only parameters, should be cleared upon initialization */
+	u8 toggle_carry;	/* toggle carry from the last TD submitted */
+	u32 last_iso;		/* time stamp of last queued ISO transfer */
+	struct td *td_head;	/* a pointer to the current TD handled */
+};
+
+struct td {
+	void *data;		 /* a pointer to the data buffer */
+	unsigned int len;	 /* length of the data to be submitted */
+	unsigned int actual_len; /* actual bytes transfered on this td */
+	enum fhci_ta_type type;	 /* transaction type */
+	u8 toggle;		 /* toggle for next trans. within this TD */
+	u16 iso_index;		 /* ISO transaction index */
+	u16 start_frame;	 /* start frame time stamp */
+	u16 interval;		 /* interval between trans. (for ISO/Intr) */
+	u32 status;		 /* status of the TD */
+	struct ed *ed;		 /* a handle to the corresponding ED */
+	struct urb *urb;	 /* a handle to the corresponding URB */
+	bool ioc;		 /* Inform On Completion */
+	struct list_head node;
+
+	/* read only parameters should be cleared upon initialization */
+	struct packet *pkt;
+	int nak_cnt;
+	int error_cnt;
+	struct list_head frame_lh;
+};
+
+struct packet {
+	u8 *data;	/* packet data */
+	u32 len;	/* packet length */
+	u32 status;	/* status of the packet - equivalent to the status
+			 * field for the corresponding structure td */
+	u32 info;	/* packet information */
+	void __iomem *priv_data; /* private data of the driver (TDs or BDs) */
+};
+
+/* struct for each URB */
+#define URB_INPROGRESS	0
+#define URB_DEL		1
+
+/* URB states (state field) */
+#define US_BULK		0
+#define US_BULK0	1
+
+/* three setup states */
+#define US_CTRL_SETUP	2
+#define US_CTRL_DATA	1
+#define US_CTRL_ACK	0
+
+#define EP_ZERO	0
+
+struct urb_priv {
+	int num_of_tds;
+	int tds_cnt;
+	int state;
+
+	struct td **tds;
+	struct ed *ed;
+	struct timer_list time_out;
+};
+
+struct endpoint {
+	/* Pointer to ep parameter RAM */
+	struct fhci_ep_pram __iomem *ep_pram_ptr;
+
+	/* Host transactions */
+	struct usb_td __iomem *td_base; /* first TD in the ring */
+	struct usb_td __iomem *conf_td; /* next TD for confirm after transac */
+	struct usb_td __iomem *empty_td;/* next TD for new transaction req. */
+	struct kfifo *empty_frame_Q;  /* Empty frames list to use */
+	struct kfifo *conf_frame_Q;   /* frames passed to TDs,waiting for tx */
+	struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */
+
+	bool already_pushed_dummy_bd;
+};
+
+/* struct for each 1mSec frame time */
+#define FRAME_IS_TRANSMITTED		0x00
+#define FRAME_TIMER_END_TRANSMISSION	0x01
+#define FRAME_DATA_END_TRANSMISSION	0x02
+#define FRAME_END_TRANSMISSION		0x03
+#define FRAME_IS_PREPARED		0x04
+
+struct fhci_time_frame {
+	u16 frame_num;	 /* frame number */
+	u16 total_bytes; /* total bytes submitted within this frame */
+	u8 frame_status; /* flag that indicates to stop fill this frame */
+	struct list_head tds_list; /* all tds of this frame */
+};
+
+/* internal driver structure*/
+struct fhci_usb {
+	u16 saved_msk;		 /* saving of the USB mask register */
+	struct endpoint *ep0;	 /* pointer for endpoint0 structure */
+	int intr_nesting_cnt;	 /* interrupt nesting counter */
+	u16 max_frame_usage;	 /* max frame time usage,in micro-sec */
+	u16 max_bytes_per_frame; /* max byte can be tx in one time frame */
+	u32 sw_transaction_time; /* sw complete trans time,in micro-sec */
+	struct fhci_time_frame *actual_frame;
+	struct fhci_controller_list *hc_list;	/* main structure for hc */
+	struct virtual_root_hub *vroot_hub;
+	enum fhci_port_status port_status;	/* v_rh port status */
+
+	u32 (*transfer_confirm)(struct fhci_hcd *fhci);
+
+	struct fhci_hcd *fhci;
+};
+
+/*
+ * Various helpers and prototypes below.
+ */
+
+static inline u16 get_frame_num(struct fhci_hcd *fhci)
+{
+	return in_be16(&fhci->pram->frame_num) & 0x07ff;
+}
+
+#define fhci_dbg(fhci, fmt, args...) \
+		dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_vdbg(fhci, fmt, args...) \
+		dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_err(fhci, fmt, args...) \
+		dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_info(fhci, fmt, args...) \
+		dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+#define fhci_warn(fhci, fmt, args...) \
+		dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args)
+
+static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd)
+{
+	return (struct fhci_hcd *)hcd->hcd_priv;
+}
+
+static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci)
+{
+	return container_of((void *)fhci, struct usb_hcd, hcd_priv);
+}
+
+/* fifo of pointers */
+static inline struct kfifo *cq_new(int size)
+{
+	return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL);
+}
+
+static inline void cq_delete(struct kfifo *kfifo)
+{
+	kfifo_free(kfifo);
+}
+
+static inline unsigned int cq_howmany(struct kfifo *kfifo)
+{
+	return __kfifo_len(kfifo) / sizeof(void *);
+}
+
+static inline int cq_put(struct kfifo *kfifo, void *p)
+{
+	return __kfifo_put(kfifo, (void *)&p, sizeof(p));
+}
+
+static inline void *cq_get(struct kfifo *kfifo)
+{
+	void *p = NULL;
+
+	__kfifo_get(kfifo, (void *)&p, sizeof(p));
+	return p;
+}
+
+/* fhci-hcd.c */
+void fhci_start_sof_timer(struct fhci_hcd *fhci);
+void fhci_stop_sof_timer(struct fhci_hcd *fhci);
+u16 fhci_get_sof_timer_count(struct fhci_usb *usb);
+void fhci_usb_enable_interrupt(struct fhci_usb *usb);
+void fhci_usb_disable_interrupt(struct fhci_usb *usb);
+int fhci_ioports_check_bus_state(struct fhci_hcd *fhci);
+
+/* fhci-mem.c */
+void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td);
+void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed);
+struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci);
+struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb,
+			struct urb_priv *urb_priv, struct ed *ed, u16 index,
+			enum fhci_ta_type type, int toggle, u8 *data, u32 len,
+			u16 interval, u16 start_frame, bool ioc);
+void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number);
+
+/* fhci-hub.c */
+void fhci_config_transceiver(struct fhci_hcd *fhci,
+			enum fhci_port_status status);
+void fhci_port_disable(struct fhci_hcd *fhci);
+void fhci_port_enable(void *lld);
+void fhci_io_port_generate_reset(struct fhci_hcd *fhci);
+void fhci_port_reset(void *lld);
+int fhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+		     u16 wIndex, char *buf, u16 wLength);
+
+/* fhci-tds.c */
+void fhci_flush_bds(struct fhci_usb *usb);
+void fhci_flush_actual_frame(struct fhci_usb *usb);
+u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt,
+			  enum fhci_ta_type trans_type, u8 dest_addr,
+			  u8 dest_ep, enum fhci_tf_mode trans_mode,
+			  enum fhci_speed dest_speed, u8 data_toggle);
+void fhci_host_transmit_actual_frame(struct fhci_usb *usb);
+void fhci_tx_conf_interrupt(struct fhci_usb *usb);
+void fhci_push_dummy_bd(struct endpoint *ep);
+u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
+		   u32 ring_len);
+void fhci_init_ep_registers(struct fhci_usb *usb,
+			    struct endpoint *ep,
+			    enum fhci_mem_alloc data_mem);
+void fhci_ep0_free(struct fhci_usb *usb);
+
+/* fhci-sched.c */
+extern struct tasklet_struct fhci_tasklet;
+void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt);
+void fhci_flush_all_transmissions(struct fhci_usb *usb);
+void fhci_schedule_transactions(struct fhci_usb *usb);
+void fhci_device_connected_interrupt(struct fhci_hcd *fhci);
+void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci);
+void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb);
+u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci);
+irqreturn_t fhci_irq(struct usb_hcd *hcd);
+irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd);
+
+/* fhci-q.h */
+void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb);
+struct td *fhci_remove_td_from_ed(struct ed *ed);
+struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame);
+void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed);
+struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame);
+void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td);
+struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list);
+void fhci_done_td(struct urb *urb, struct td *td);
+void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed);
+
+#ifdef CONFIG_FHCI_DEBUG
+
+void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er);
+void fhci_dfs_destroy(struct fhci_hcd *fhci);
+void fhci_dfs_create(struct fhci_hcd *fhci);
+
+#else
+
+static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {}
+static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {}
+static inline void fhci_dfs_create(struct fhci_hcd *fhci) {}
+
+#endif /* CONFIG_FHCI_DEBUG */
+
+#endif /* __FHCI_H */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 65a9609..5cf5f1e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -593,12 +593,10 @@
 	 * to be checked in case boot firmware (BIOS/SMM/...) has set up
 	 * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
 	 * If the bus glue detected wakeup capability then it should
-	 * already be enabled.  Either way, if wakeup should be enabled
-	 * but isn't, we'll enable it now.
+	 * already be enabled; if so we'll just enable it again.
 	 */
-	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
-			&& !device_can_wakeup(hcd->self.controller))
-		device_init_wakeup(hcd->self.controller, 1);
+	if ((ohci->hc_control & OHCI_CTRL_RWC) != 0)
+		device_set_wakeup_capable(hcd->self.controller, 1);
 
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 	case OHCI_USB_OPER:
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 4bbddb7..f3aaba3 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -315,14 +315,14 @@
 		return -ENODEV;
 	}
 
-	usb_host_ck = clk_get(0, "usb_hhc_ck");
+	usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
 	if (IS_ERR(usb_host_ck))
 		return PTR_ERR(usb_host_ck);
 
 	if (!cpu_is_omap15xx())
-		usb_dc_ck = clk_get(0, "usb_dc_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
 	else
-		usb_dc_ck = clk_get(0, "lb_ck");
+		usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
 
 	if (IS_ERR(usb_dc_ck)) {
 		clk_put(usb_host_ck);
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 8b28ae7..5d625c3 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4e22106..944f7e0 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 189a9db..ad4fb15 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -57,7 +57,6 @@
 #define USB_DEVICE_ID_LD_MACHINETEST	0x2040	/* USB Product ID of Machine Test System */
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
-#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
 #define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
 #define USB_DEVICE_ID_VERNIER_SKIP	0x0003
 #define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
@@ -85,7 +84,6 @@
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
 	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
-	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index e06810a..4cf27c7 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -37,6 +37,7 @@
 #define MON_IOCX_GET   _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
 #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
 #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+
 #ifdef CONFIG_COMPAT
 #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
 #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
@@ -921,21 +922,6 @@
 		}
 		break;
 
-#ifdef CONFIG_COMPAT
-	case MON_IOCX_GET32: {
-		struct mon_bin_get32 getb;
-
-		if (copy_from_user(&getb, (void __user *)arg,
-					    sizeof(struct mon_bin_get32)))
-			return -EFAULT;
-
-		ret = mon_bin_get_event(file, rp,
-		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
-		    getb.alloc32);
-		}
-		break;
-#endif
-
 	case MON_IOCX_MFETCH:
 		{
 		struct mon_bin_mfetch mfetch;
@@ -962,35 +948,6 @@
 		}
 		break;
 
-#ifdef CONFIG_COMPAT
-	case MON_IOCX_MFETCH32:
-		{
-		struct mon_bin_mfetch32 mfetch;
-		struct mon_bin_mfetch32 __user *uptr;
-
-		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
-
-		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
-			return -EFAULT;
-
-		if (mfetch.nflush32) {
-			ret = mon_bin_flush(rp, mfetch.nflush32);
-			if (ret < 0)
-				return ret;
-			if (put_user(ret, &uptr->nflush32))
-				return -EFAULT;
-		}
-		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
-		    mfetch.nfetch32);
-		if (ret < 0)
-			return ret;
-		if (put_user(ret, &uptr->nfetch32))
-			return -EFAULT;
-		ret = 0;
-		}
-		break;
-#endif
-
 	case MON_IOCG_STATS: {
 		struct mon_bin_stats __user *sp;
 		unsigned int nevents;
@@ -1018,6 +975,73 @@
 	return ret;
 }
 
+#ifdef CONFIG_COMPAT
+static long mon_bin_compat_ioctl(struct file *file,
+    unsigned int cmd, unsigned long arg)
+{
+	struct mon_reader_bin *rp = file->private_data;
+	int ret;
+
+	switch (cmd) {
+
+	case MON_IOCX_GET32: {
+		struct mon_bin_get32 getb;
+
+		if (copy_from_user(&getb, (void __user *)arg,
+					    sizeof(struct mon_bin_get32)))
+			return -EFAULT;
+
+		ret = mon_bin_get_event(file, rp,
+		    compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+		    getb.alloc32);
+		if (ret < 0)
+			return ret;
+		}
+		return 0;
+
+	case MON_IOCX_MFETCH32:
+		{
+		struct mon_bin_mfetch32 mfetch;
+		struct mon_bin_mfetch32 __user *uptr;
+
+		uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
+
+		if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+			return -EFAULT;
+
+		if (mfetch.nflush32) {
+			ret = mon_bin_flush(rp, mfetch.nflush32);
+			if (ret < 0)
+				return ret;
+			if (put_user(ret, &uptr->nflush32))
+				return -EFAULT;
+		}
+		ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
+		    mfetch.nfetch32);
+		if (ret < 0)
+			return ret;
+		if (put_user(ret, &uptr->nfetch32))
+			return -EFAULT;
+		}
+		return 0;
+
+	case MON_IOCG_STATS:
+		return mon_bin_ioctl(NULL, file, cmd,
+					    (unsigned long) compat_ptr(arg));
+
+	case MON_IOCQ_URB_LEN:
+	case MON_IOCQ_RING_SIZE:
+	case MON_IOCT_RING_SIZE:
+	case MON_IOCH_MFLUSH:
+		return mon_bin_ioctl(NULL, file, cmd, arg);
+
+	default:
+		;
+	}
+	return -ENOTTY;
+}
+#endif /* CONFIG_COMPAT */
+
 static unsigned int
 mon_bin_poll(struct file *file, struct poll_table_struct *wait)
 {
@@ -1094,6 +1118,9 @@
 	/* .write =	mon_text_write, */
 	.poll =		mon_bin_poll,
 	.ioctl =	mon_bin_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl =	mon_bin_compat_ioctl,
+#endif
 	.release =	mon_bin_release,
 	.mmap =		mon_bin_mmap,
 };
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 5af7379..9985db0 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -11,6 +11,7 @@
 	depends on (USB || USB_GADGET) && HAVE_CLK
 	depends on !SUPERH
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
@@ -49,7 +50,7 @@
 	depends on USB_MUSB_HDRC && ARCH_OMAP34XX
 
 comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523)
+	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 
 config USB_TUSB6010
 	boolean "TUSB 6010 support"
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 5ad6d08..569ef0f 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -9,6 +9,7 @@
 #include <linux/usb.h>
 
 #include "musb_core.h"
+#include "musb_debug.h"
 #include "cppi_dma.h"
 
 
@@ -423,6 +424,7 @@
 	}
 }
 
+#ifdef CONFIG_USB_MUSB_DEBUG
 static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd)
 {
 	pr_debug("RXBD/%s %08x: "
@@ -431,10 +433,11 @@
 			bd->hw_next, bd->hw_bufp, bd->hw_off_len,
 			bd->hw_options);
 }
+#endif
 
 static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx)
 {
-#if MUSB_DEBUG > 0
+#ifdef CONFIG_USB_MUSB_DEBUG
 	struct cppi_descriptor	*bd;
 
 	if (!_dbg_level(level))
@@ -881,12 +884,14 @@
 	bd->hw_options |= CPPI_SOP_SET;
 	tail->hw_options |= CPPI_EOP_SET;
 
-	if (debug >= 5) {
+#ifdef CONFIG_USB_MUSB_DEBUG
+	if (_dbg_level(5)) {
 		struct cppi_descriptor	*d;
 
 		for (d = rx->head; d; d = d->next)
 			cppi_dump_rxbd("S", d);
 	}
+#endif
 
 	/* in case the preceding transfer left some state... */
 	tail = rx->last_processed;
@@ -990,6 +995,7 @@
 	cppi_ch->offset = 0;
 	cppi_ch->maxpacket = maxpacket;
 	cppi_ch->buf_len = len;
+	cppi_ch->channel.actual_len = 0;
 
 	/* TX channel? or RX? */
 	if (cppi_ch->transmit)
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 0d566dc..5a8fd5d 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -32,9 +32,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <mach/arch/hardware.h>
-#include <mach/arch/memory.h>
-#include <mach/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/memory.h>
+#include <mach/gpio.h>
+
 #include <asm/mach-types.h>
 
 #include "musb_core.h"
@@ -370,12 +371,6 @@
 	return -EIO;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
-{
-       /* EVM can't do this (right?) */
-       return -EIO;
-}
-
 int __init musb_platform_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 6c7faac..2cc34fa 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1824,8 +1824,9 @@
 	musb_gadget_cleanup(musb);
 #endif
 
-	if (musb->nIrq >= 0 && musb->irq_wake) {
-		disable_irq_wake(musb->nIrq);
+	if (musb->nIrq >= 0) {
+		if (musb->irq_wake)
+			disable_irq_wake(musb->nIrq);
 		free_irq(musb->nIrq, musb);
 	}
 	if (is_dma_capable() && musb->dma_controller) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6197dae..4ea3053 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -874,10 +874,10 @@
 		status = -EBUSY;
 		goto fail;
 	}
-	musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	musb_ep->type = usb_endpoint_type(desc);
 
 	/* check direction and (later) maxpacket size against endpoint */
-	if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum)
+	if (usb_endpoint_num(desc) != epnum)
 		goto fail;
 
 	/* REVISIT this rules out high bandwidth periodic transfers */
@@ -890,7 +890,7 @@
 	 * packet size (or fail), set the mode, clear the fifo
 	 */
 	musb_ep_select(mbase, epnum);
-	if (desc->bEndpointAddress & USB_DIR_IN) {
+	if (usb_endpoint_dir_in(desc)) {
 		u16 int_txe = musb_readw(mbase, MUSB_INTRTXE);
 
 		if (hw_ep->is_shared_fifo)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 99fa612..a035cec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1847,8 +1847,8 @@
 		goto done;
 	}
 
-	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
-	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	qh->epnum = usb_endpoint_num(epd);
+	qh->type = usb_endpoint_type(epd);
 
 	/* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */
 	qh->addr_reg = (u8) usb_pipedevice(urb->pipe);
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 52f7f29..7e073a0 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 8e8dbdb..ee55b44 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -6,14 +6,14 @@
 
 comment "OTG and related infrastructure"
 
-if USB || USB_GADGET
-
 config USB_OTG_UTILS
 	bool
 	help
 	  Select this to make sure the build includes objects from
 	  the OTG infrastructure directory.
 
+if USB || USB_GADGET
+
 #
 # USB Transceiver Drivers
 #
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index cfaf1f0..027f4b7 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -85,6 +85,8 @@
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c70a8f6..7559733 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -660,6 +660,8 @@
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
+	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
+	{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 373ee09..1b62eff 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -854,6 +854,10 @@
 #define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
 #define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
 
+/* Alti-2 products  http://www.alti-2.com */
+#define ALTI2_VID	0x1BC9
+#define ALTI2_N3_PID	0x6001	/* Neptune 3 */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
@@ -881,6 +885,11 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * DIEBOLD BCS SE923
+ */
+#define DIEBOLD_BCS_SE923_PID	0xfb99
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ed1834..6c89da9 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -158,6 +158,13 @@
 #define HUAWEI_PRODUCT_E143E			0x143E
 #define HUAWEI_PRODUCT_E143F			0x143F
 
+#define QUANTA_VENDOR_ID			0x0408
+#define QUANTA_PRODUCT_Q101			0xEA02
+#define QUANTA_PRODUCT_Q111			0xEA03
+#define QUANTA_PRODUCT_GLX			0xEA04
+#define QUANTA_PRODUCT_GKE			0xEA05
+#define QUANTA_PRODUCT_GLE			0xEA06
+
 #define NOVATELWIRELESS_VENDOR_ID		0x1410
 
 /* YISO PRODUCTS */
@@ -224,7 +231,7 @@
 #define ONDA_VENDOR_ID				0x19d2
 #define ONDA_PRODUCT_MSA501HS			0x0001
 #define ONDA_PRODUCT_ET502HS			0x0002
-#define ONDA_PRODUCT_MT503HS			0x0200
+#define ONDA_PRODUCT_MT503HS			0x2000
 
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
@@ -298,6 +305,11 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) },
+	{ USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3cf41df..baf5911 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -184,6 +184,7 @@
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
 	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +192,7 @@
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -205,6 +207,7 @@
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
+	{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
 	{ }
 };
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 7e4752f..b7ea5db 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -27,7 +27,9 @@
 
 /* Vendor and product ids */
 #define TI_VENDOR_ID			0x0451
+#define IBM_VENDOR_ID			0x04b3
 #define TI_3410_PRODUCT_ID		0x3410
+#define IBM_4543_PRODUCT_ID		0x4543
 #define TI_3410_EZ430_ID		0xF430  /* TI ez430 development tool */
 #define TI_5052_BOOT_PRODUCT_ID		0x5052	/* no EEPROM, no firmware */
 #define TI_5152_BOOT_PRODUCT_ID		0x5152	/* no EEPROM, no firmware */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a7f9513..69269f7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -995,6 +995,16 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
 
+/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net>
+ * Support the following product :
+ *    "Dane-Elec MediaTouch"
+ */
+UNUSUAL_DEV(  0x071b, 0x32bb, 0x0000, 0x0000,
+		"RockChip",
+		"MTP",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64),
+
 /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com>
  * This USB MP3/AVI player device fails and disconnects if more than 128
  * sectors (64kB) are read/written in a single command, and may be present
@@ -1251,6 +1261,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */
+UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
+		"Argosy",
+		"Storage",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -1589,6 +1606,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_NO_WP_DETECT ),
 
+/* Reported by The Solutor <thesolutor@gmail.com> */
+UNUSUAL_DEV(  0x0fce, 0xd0e1, 0x0000, 0x0000,
+		"Sony Ericsson",
+		"MD400",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 /* Reported by Jan Mate <mate@fiit.stuba.sk>
  * and by Soeren Sonnenburg <kernel@nn7.de> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
@@ -2031,15 +2055,11 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
-/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
- * This entry is needed to bypass the ZeroCD mechanism
- * and to properly load as a modem device.
- */
-UNUSUAL_DEV(  0x19d2, 0x2000, 0x0000, 0x0000,
-		"Onda ET502HS",
-		"USB MMC Storage",
+UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
+		"ST",
+		"2A",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_IGNORE_DEVICE),
+		US_FL_FIX_CAPACITY),
 
 /* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
  * and Renato Perini <rperini@email.it>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6372f8b..c94f719 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2123,6 +2123,18 @@
 	  Select this option if display contents should be inherited as set by
 	  the bootloader.
 
+config FB_MX3
+       tristate "MX3 Framebuffer support"
+       depends on FB && MX3_IPU
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       default y
+       help
+         This is a framebuffer device for the i.MX31 LCD Controller. So
+         far only synchronous displays are supported. If you plan to use
+         an LCD display with your i.MX31 system, say Y here.
+
 source "drivers/video/omap/Kconfig"
 
 source "drivers/video/backlight/Kconfig"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index be2b657..2a998ca 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -132,6 +132,7 @@
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_MX3)              += mx3fb.o
 
 # the test framebuffer is last
 obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 2c55671..359fc64 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -72,7 +72,6 @@
 	snprintf(chan->adapter.name, sizeof(chan->adapter.name),
 		 "radeonfb %s", name);
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_RADEON;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->rinfo->pdev->dev;
 	chan->algo.setsda		= radeon_gpio_setsda;
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index 7787c33..9dd55e5 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -90,7 +90,6 @@
         chan->adapter.owner             = THIS_MODULE;
         chan->adapter.algo_data         = &chan->algo;
         chan->adapter.dev.parent        = &chan->par->dev->dev;
-	chan->adapter.id                = I2C_HW_B_I810;
 	chan->algo.setsda               = i810i2c_setsda;
 	chan->algo.setscl               = i810i2c_setscl;
 	chan->algo.getsda               = i810i2c_getsda;
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c
index 5d896b8..b306549 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/intelfb/intelfb_i2c.c
@@ -111,7 +111,6 @@
 		 "intelfb %s", name);
 	chan->adapter.class		= class;
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_INTELFB;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->dinfo->pdev->dev;
 	chan->algo.setsda		= intelfb_gpio_setsda;
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 0000000..8a75d05
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,1555 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <mach/hardware.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MX3FB_NAME             "mx3_sdc_fb"
+
+#define MX3FB_REG_OFFSET       0xB4
+
+/* SDC Registers */
+#define SDC_COM_CONF           (0xB4 - MX3FB_REG_OFFSET)
+#define SDC_GW_CTRL            (0xB8 - MX3FB_REG_OFFSET)
+#define SDC_FG_POS             (0xBC - MX3FB_REG_OFFSET)
+#define SDC_BG_POS             (0xC0 - MX3FB_REG_OFFSET)
+#define SDC_CUR_POS            (0xC4 - MX3FB_REG_OFFSET)
+#define SDC_PWM_CTRL           (0xC8 - MX3FB_REG_OFFSET)
+#define SDC_CUR_MAP            (0xCC - MX3FB_REG_OFFSET)
+#define SDC_HOR_CONF           (0xD0 - MX3FB_REG_OFFSET)
+#define SDC_VER_CONF           (0xD4 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_1       (0xD8 - MX3FB_REG_OFFSET)
+#define SDC_SHARP_CONF_2       (0xDC - MX3FB_REG_OFFSET)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR      0x00000001UL
+#define SDC_COM_FG_EN          0x00000010UL
+#define SDC_COM_GWSEL          0x00000020UL
+#define SDC_COM_GLB_A          0x00000040UL
+#define SDC_COM_KEY_COLOR_G    0x00000080UL
+#define SDC_COM_BG_EN          0x00000200UL
+#define SDC_COM_SHARP          0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L     0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF                (0x0124 - MX3FB_REG_OFFSET)
+#define DI_DISP_SIG_POL                (0x0128 - MX3FB_REG_OFFSET)
+#define DI_SER_DISP1_CONF      (0x012C - MX3FB_REG_OFFSET)
+#define DI_SER_DISP2_CONF      (0x0130 - MX3FB_REG_OFFSET)
+#define DI_HSP_CLK_PER         (0x0134 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_1   (0x0138 - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_2   (0x013C - MX3FB_REG_OFFSET)
+#define DI_DISP0_TIME_CONF_3   (0x0140 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_1   (0x0144 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_2   (0x0148 - MX3FB_REG_OFFSET)
+#define DI_DISP1_TIME_CONF_3   (0x014C - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_1   (0x0150 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_2   (0x0154 - MX3FB_REG_OFFSET)
+#define DI_DISP2_TIME_CONF_3   (0x0158 - MX3FB_REG_OFFSET)
+#define DI_DISP3_TIME_CONF     (0x015C - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB0_MAP       (0x0160 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB1_MAP       (0x0164 - MX3FB_REG_OFFSET)
+#define DI_DISP0_DB2_MAP       (0x0168 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB0_MAP       (0x016C - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB1_MAP       (0x0170 - MX3FB_REG_OFFSET)
+#define DI_DISP0_CB2_MAP       (0x0174 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB0_MAP       (0x0178 - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB1_MAP       (0x017C - MX3FB_REG_OFFSET)
+#define DI_DISP1_DB2_MAP       (0x0180 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB0_MAP       (0x0184 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB1_MAP       (0x0188 - MX3FB_REG_OFFSET)
+#define DI_DISP1_CB2_MAP       (0x018C - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB0_MAP       (0x0190 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB1_MAP       (0x0194 - MX3FB_REG_OFFSET)
+#define DI_DISP2_DB2_MAP       (0x0198 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB0_MAP       (0x019C - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB1_MAP       (0x01A0 - MX3FB_REG_OFFSET)
+#define DI_DISP2_CB2_MAP       (0x01A4 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B0_MAP                (0x01A8 - MX3FB_REG_OFFSET)
+#define DI_DISP3_B1_MAP                (0x01AC - MX3FB_REG_OFFSET)
+#define DI_DISP3_B2_MAP                (0x01B0 - MX3FB_REG_OFFSET)
+#define DI_DISP_ACC_CC         (0x01B4 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_CONF       (0x01B8 - MX3FB_REG_OFFSET)
+#define DI_DISP_LLA_DATA       (0x01BC - MX3FB_REG_OFFSET)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL_SHIFT          28
+#define DI_D3_HSYNC_POL_SHIFT          27
+#define DI_D3_DRDY_SHARP_POL_SHIFT     26
+#define DI_D3_CLK_POL_SHIFT            25
+#define DI_D3_DATA_POL_SHIFT           24
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE_SHIFT           26
+#define DI_D3_CLK_SEL_SHIFT            25
+#define DI_D3_DATAMSK_SHIFT            24
+
+enum ipu_panel {
+       IPU_PANEL_SHARP_TFT,
+       IPU_PANEL_TFT,
+};
+
+struct ipu_di_signal_cfg {
+       unsigned datamask_en:1;
+       unsigned clksel_en:1;
+       unsigned clkidle_en:1;
+       unsigned data_pol:1;    /* true = inverted */
+       unsigned clk_pol:1;     /* true = rising edge */
+       unsigned enable_pol:1;
+       unsigned Hsync_pol:1;   /* true = active high */
+       unsigned Vsync_pol:1;
+};
+
+static const struct fb_videomode mx3fb_modedb[] = {
+       {
+               /* 240x320 @ 60 Hz */
+               .name           = "Sharp-QVGA",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 320,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 240x33 @ 60 Hz */
+               .name           = "Sharp-CLI",
+               .refresh        = 60,
+               .xres           = 240,
+               .yres           = 33,
+               .pixclock       = 185925,
+               .left_margin    = 9,
+               .right_margin   = 16,
+               .upper_margin   = 7,
+               .lower_margin   = 9 + 287,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+                                 FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT |
+                                 FB_SYNC_CLK_IDLE_EN,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* 640x480 @ 60 Hz */
+               .name           = "NEC-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 38255,
+               .left_margin    = 144,
+               .right_margin   = 0,
+               .upper_margin   = 34,
+               .lower_margin   = 40,
+               .hsync_len      = 1,
+               .vsync_len      = 1,
+               .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* NTSC TV output */
+               .name           = "TV-NTSC",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 858 - 640 - 38 - 3,
+               .upper_margin   = 36,
+               .lower_margin   = 518 - 480 - 36 - 1,
+               .hsync_len      = 3,
+               .vsync_len      = 1,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* PAL TV output */
+               .name           = "TV-PAL",
+               .refresh        = 50,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 37538,
+               .left_margin    = 38,
+               .right_margin   = 960 - 640 - 38 - 32,
+               .upper_margin   = 32,
+               .lower_margin   = 555 - 480 - 32 - 3,
+               .hsync_len      = 32,
+               .vsync_len      = 3,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       }, {
+               /* TV output VGA mode, 640x480 @ 65 Hz */
+               .name           = "TV-VGA",
+               .refresh        = 60,
+               .xres           = 640,
+               .yres           = 480,
+               .pixclock       = 40574,
+               .left_margin    = 35,
+               .right_margin   = 45,
+               .upper_margin   = 9,
+               .lower_margin   = 1,
+               .hsync_len      = 46,
+               .vsync_len      = 5,
+               .sync           = 0,
+               .vmode          = FB_VMODE_NONINTERLACED,
+               .flag           = 0,
+       },
+};
+
+struct mx3fb_data {
+       struct fb_info          *fbi;
+       int                     backlight_level;
+       void __iomem            *reg_base;
+       spinlock_t              lock;
+       struct device           *dev;
+
+       uint32_t                h_start_width;
+       uint32_t                v_start_width;
+};
+
+struct dma_chan_request {
+       struct mx3fb_data       *mx3fb;
+       enum ipu_channel        id;
+};
+
+/* MX3 specific framebuffer information. */
+struct mx3fb_info {
+       int                             blank;
+       enum ipu_channel                ipu_ch;
+       uint32_t                        cur_ipu_buf;
+
+       u32                             pseudo_palette[16];
+
+       struct completion               flip_cmpl;
+       struct mutex                    mutex;  /* Protects fb-ops */
+       struct mx3fb_data               *mx3fb;
+       struct idmac_channel            *idmac_channel;
+       struct dma_async_tx_descriptor  *txd;
+       dma_cookie_t                    cookie;
+       struct scatterlist              sg[2];
+
+       u32                             sync;   /* preserve var->sync flags */
+};
+
+static void mx3fb_dma_done(void *);
+
+/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+static unsigned long default_bpp = 16;
+
+static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg)
+{
+       return __raw_readl(mx3fb->reg_base + reg);
+}
+
+static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg)
+{
+       __raw_writel(value, mx3fb->reg_base + reg);
+}
+
+static const uint32_t di_mappings[] = {
+       0x1600AAAA, 0x00E05555, 0x00070000, 3,  /* RGB888 */
+       0x0005000F, 0x000B000F, 0x0011000F, 1,  /* RGB666 */
+       0x0011000F, 0x000B000F, 0x0005000F, 1,  /* BGR666 */
+       0x0004003F, 0x000A000F, 0x000F003F, 1   /* RGB565 */
+};
+
+static void sdc_fb_init(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF);
+}
+
+/* Returns enabled flag before uninit */
+static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi)
+{
+       struct mx3fb_data *mx3fb = fbi->mx3fb;
+       uint32_t reg;
+
+       reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+
+       mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF);
+
+       return reg & SDC_COM_BG_EN;
+}
+
+static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct dma_chan *dma_chan = &ichan->dma_chan;
+       unsigned long flags;
+       dma_cookie_t cookie;
+
+       dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+               to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+
+       /* This enables the channel */
+       if (mx3_fbi->cookie < 0) {
+               mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan,
+                     &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+               if (!mx3_fbi->txd) {
+                       dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               mx3_fbi->txd->callback_param    = mx3_fbi->txd;
+               mx3_fbi->txd->callback          = mx3fb_dma_done;
+
+               cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd);
+               dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       } else {
+               if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) {
+                       dev_err(mx3fb->dev, "Cannot enable channel %d\n",
+                               dma_chan->chan_id);
+                       return;
+               }
+
+               /* Just re-activate the same buffer */
+               dma_async_issue_pending(dma_chan);
+               cookie = mx3_fbi->cookie;
+               dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__,
+                      mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+');
+       }
+
+       if (cookie >= 0) {
+               spin_lock_irqsave(&mx3fb->lock, flags);
+               sdc_fb_init(mx3_fbi);
+               mx3_fbi->cookie = cookie;
+               spin_unlock_irqrestore(&mx3fb->lock, flags);
+       }
+
+       /*
+        * Attention! Without this msleep the channel keeps generating
+        * interrupts. Next sdc_set_brightness() is going to be called
+        * from mx3fb_blank().
+        */
+       msleep(2);
+}
+
+static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
+{
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       uint32_t enabled;
+       unsigned long flags;
+
+       spin_lock_irqsave(&mx3fb->lock, flags);
+
+       enabled = sdc_fb_uninit(mx3_fbi);
+
+       spin_unlock_irqrestore(&mx3fb->lock, flags);
+
+       mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+       mx3_fbi->txd = NULL;
+       mx3_fbi->cookie = -EINVAL;
+}
+
+/**
+ * sdc_set_window_pos() - set window position of the respective plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @x_pos:     X coordinate relative to the top left corner to place window at.
+ * @y_pos:     Y coordinate relative to the top left corner to place window at.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                             int16_t x_pos, int16_t y_pos)
+{
+       x_pos += mx3fb->h_start_width;
+       y_pos += mx3fb->v_start_width;
+
+       if (channel != IDMAC_SDC_0)
+               return -EINVAL;
+
+       mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS);
+       return 0;
+}
+
+/**
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @mx3fb:             mx3fb context.
+ * @panel:             panel type.
+ * @pixel_clk:         desired pixel clock frequency in Hz.
+ * @width:             width of panel in pixels.
+ * @height:            height of panel in pixels.
+ * @pixel_fmt:         pixel format of buffer as FOURCC ASCII code.
+ * @h_start_width:     number of pixel clocks between the HSYNC signal pulse
+ *                     and the start of valid data.
+ * @h_sync_width:      width of the HSYNC signal in units of pixel clocks.
+ * @h_end_width:       number of pixel clocks between the end of valid data
+ *                     and the HSYNC signal for next line.
+ * @v_start_width:     number of lines between the VSYNC signal pulse and the
+ *                     start of valid data.
+ * @v_sync_width:      width of the VSYNC signal in units of lines
+ * @v_end_width:       number of lines between the end of valid data and the
+ *                     VSYNC signal for next frame.
+ * @sig:               bitfield of signal polarities for LCD interface.
+ * @return:            0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel,
+                         uint32_t pixel_clk,
+                         uint16_t width, uint16_t height,
+                         enum pixel_fmt pixel_fmt,
+                         uint16_t h_start_width, uint16_t h_sync_width,
+                         uint16_t h_end_width, uint16_t v_start_width,
+                         uint16_t v_sync_width, uint16_t v_end_width,
+                         struct ipu_di_signal_cfg sig)
+{
+       unsigned long lock_flags;
+       uint32_t reg;
+       uint32_t old_conf;
+       uint32_t div;
+       struct clk *ipu_clk;
+
+       dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height);
+
+       if (v_sync_width == 0 || h_sync_width == 0)
+               return -EINVAL;
+
+       /* Init panel size and blanking periods */
+       reg = ((uint32_t) (h_sync_width - 1) << 26) |
+               ((uint32_t) (width + h_start_width + h_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " hor_conf %x,", reg);
+#endif
+
+       reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+           ((uint32_t) (height + v_start_width + v_end_width - 1) << 16);
+       mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF);
+
+#ifdef DEBUG
+       printk(KERN_CONT " ver_conf %x\n", reg);
+#endif
+
+       mx3fb->h_start_width = h_start_width;
+       mx3fb->v_start_width = v_start_width;
+
+       switch (panel) {
+       case IPU_PANEL_SHARP_TFT:
+               mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1);
+               mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2);
+               mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       case IPU_PANEL_TFT:
+               mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF);
+               break;
+       default:
+               return -EINVAL;
+       }
+
+       /* Init clocking */
+
+       /*
+        * Calculate divider: fractional part is 4 bits so simply multiple by
+        * 24 to get fractional part, as long as we stay under ~250MHz and on
+        * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+        */
+       dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk);
+
+       ipu_clk = clk_get(mx3fb->dev, "ipu_clk");
+       div = clk_get_rate(ipu_clk) * 16 / pixel_clk;
+       clk_put(ipu_clk);
+
+       if (div < 0x40) {       /* Divider less than 4 */
+               dev_dbg(mx3fb->dev,
+                       "InitPanel() - Pixel clock divider less than 4\n");
+               div = 0x40;
+       }
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       /*
+        * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits
+        * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing
+        * debug. DISP3_IF_CLK_UP_WR is 0
+        */
+       mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF);
+
+       /* DI settings */
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF;
+       old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT |
+           sig.clksel_en << DI_D3_CLK_SEL_SHIFT |
+           sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF);
+
+       old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF;
+       old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT |
+           sig.clk_pol << DI_D3_CLK_POL_SHIFT |
+           sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT |
+           sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT |
+           sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT;
+       mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL);
+
+       switch (pixel_fmt) {
+       case IPU_PIX_FMT_RGB24:
+               mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_RGB666:
+               mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       case IPU_PIX_FMT_BGR666:
+               mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       default:
+               mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP);
+               mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP);
+               mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) |
+                            ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC);
+               break;
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF));
+       dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL));
+       dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n",
+               mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF));
+
+       return 0;
+}
+
+/**
+ * sdc_set_color_key() - set the transparent color key for SDC graphic plane.
+ * @mx3fb:     mx3fb context.
+ * @channel:   IPU DMAC channel ID.
+ * @enable:    boolean to enable or disable color keyl.
+ * @color_key: 24-bit RGB color to use as transparent color key.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel,
+                            bool enable, uint32_t color_key)
+{
+       uint32_t reg, sdc_conf;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+       if (channel == IDMAC_SDC_0)
+               sdc_conf &= ~SDC_COM_GWSEL;
+       else
+               sdc_conf |= SDC_COM_GWSEL;
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L;
+               mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL),
+                            SDC_GW_CTRL);
+
+               sdc_conf |= SDC_COM_KEY_COLOR_G;
+       } else {
+               sdc_conf &= ~SDC_COM_KEY_COLOR_G;
+       }
+       mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF);
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+/**
+ * sdc_set_global_alpha() - set global alpha blending modes.
+ * @mx3fb:     mx3fb context.
+ * @enable:    boolean to enable or disable global alpha blending. If disabled,
+ *             per pixel blending is used.
+ * @alpha:     global alpha value.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha)
+{
+       uint32_t reg;
+       unsigned long lock_flags;
+
+       spin_lock_irqsave(&mx3fb->lock, lock_flags);
+
+       if (enable) {
+               reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL;
+               mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL);
+
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF);
+       } else {
+               reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF);
+               mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF);
+       }
+
+       spin_unlock_irqrestore(&mx3fb->lock, lock_flags);
+
+       return 0;
+}
+
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
+{
+       /* This might be board-specific */
+       mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
+       return;
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+       uint32_t pixfmt = 0;
+       switch (bpp) {
+       case 24:
+               pixfmt = IPU_PIX_FMT_BGR24;
+               break;
+       case 32:
+               pixfmt = IPU_PIX_FMT_BGR32;
+               break;
+       case 16:
+               pixfmt = IPU_PIX_FMT_RGB565;
+               break;
+       }
+       return pixfmt;
+}
+
+static int mx3fb_blank(int blank, struct fb_info *fbi);
+static int mx3fb_map_video_memory(struct fb_info *fbi);
+static int mx3fb_unmap_video_memory(struct fb_info *fbi);
+
+/**
+ * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings.
+ * @info:      framebuffer information pointer
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_fix(struct fb_info *fbi)
+{
+       struct fb_fix_screeninfo *fix = &fbi->fix;
+       struct fb_var_screeninfo *var = &fbi->var;
+
+       strncpy(fix->id, "DISP3 BG", 8);
+
+       fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
+
+       fix->type = FB_TYPE_PACKED_PIXELS;
+       fix->accel = FB_ACCEL_NONE;
+       fix->visual = FB_VISUAL_TRUECOLOR;
+       fix->xpanstep = 1;
+       fix->ypanstep = 1;
+
+       return 0;
+}
+
+static void mx3fb_dma_done(void *arg)
+{
+       struct idmac_tx_desc *tx_desc = to_tx_desc(arg);
+       struct dma_chan *chan = tx_desc->txd.chan;
+       struct idmac_channel *ichannel = to_idmac_chan(chan);
+       struct mx3fb_data *mx3fb = ichannel->client;
+       struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+
+       dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
+
+       /* We only need one interrupt, it will be re-enabled as needed */
+       disable_irq(ichannel->eof_irq);
+
+       complete(&mx3_fbi->flip_cmpl);
+}
+
+/**
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @fbi:       framebuffer information pointer.
+ * @return:    0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(struct fb_info *fbi)
+{
+       u32 mem_len;
+       struct ipu_di_signal_cfg sig_cfg;
+       enum ipu_panel mode = IPU_PANEL_TFT;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+       struct idmac_channel *ichan = mx3_fbi->idmac_channel;
+       struct idmac_video_param *video = &ichan->params.video;
+       struct scatterlist *sg = mx3_fbi->sg;
+       size_t screen_size;
+
+       dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+');
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       /* Total cleanup */
+       if (mx3_fbi->txd)
+               sdc_disable_channel(mx3_fbi);
+
+       mx3fb_set_fix(fbi);
+
+       mem_len = fbi->var.yres_virtual * fbi->fix.line_length;
+       if (mem_len > fbi->fix.smem_len) {
+               if (fbi->fix.smem_start)
+                       mx3fb_unmap_video_memory(fbi);
+
+               fbi->fix.smem_len = mem_len;
+               if (mx3fb_map_video_memory(fbi) < 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       return -ENOMEM;
+               }
+       }
+
+       screen_size = fbi->fix.line_length * fbi->var.yres;
+
+       sg_init_table(&sg[0], 1);
+       sg_init_table(&sg[1], 1);
+
+       sg_dma_address(&sg[0])  = fbi->fix.smem_start;
+       sg_set_page(&sg[0], virt_to_page(fbi->screen_base),
+                   fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base));
+
+       if (mx3_fbi->ipu_ch == IDMAC_SDC_0) {
+               memset(&sig_cfg, 0, sizeof(sig_cfg));
+               if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT)
+                       sig_cfg.Hsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT)
+                       sig_cfg.Vsync_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_INVERT)
+                       sig_cfg.clk_pol = true;
+               if (fbi->var.sync & FB_SYNC_DATA_INVERT)
+                       sig_cfg.data_pol = true;
+               if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH)
+                       sig_cfg.enable_pol = true;
+               if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN)
+                       sig_cfg.clkidle_en = true;
+               if (fbi->var.sync & FB_SYNC_CLK_SEL_EN)
+                       sig_cfg.clksel_en = true;
+               if (fbi->var.sync & FB_SYNC_SHARP_MODE)
+                       mode = IPU_PANEL_SHARP_TFT;
+
+               dev_dbg(fbi->device, "pixclock = %ul Hz\n",
+                       (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL));
+
+               if (sdc_init_panel(mx3fb, mode,
+                                  (PICOS2KHZ(fbi->var.pixclock)) * 1000UL,
+                                  fbi->var.xres, fbi->var.yres,
+                                  (fbi->var.sync & FB_SYNC_SWAP_RGB) ?
+                                  IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666,
+                                  fbi->var.left_margin,
+                                  fbi->var.hsync_len,
+                                  fbi->var.right_margin +
+                                  fbi->var.hsync_len,
+                                  fbi->var.upper_margin,
+                                  fbi->var.vsync_len,
+                                  fbi->var.lower_margin +
+                                  fbi->var.vsync_len, sig_cfg) != 0) {
+                       mutex_unlock(&mx3_fbi->mutex);
+                       dev_err(fbi->device,
+                               "mx3fb: Error initializing panel.\n");
+                       return -EINVAL;
+               }
+       }
+
+       sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0);
+
+       mx3_fbi->cur_ipu_buf    = 0;
+
+       video->out_pixel_fmt    = bpp_to_pixfmt(fbi->var.bits_per_pixel);
+       video->out_width        = fbi->var.xres;
+       video->out_height       = fbi->var.yres;
+       video->out_stride       = fbi->var.xres_virtual;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK)
+               sdc_enable_channel(mx3_fbi);
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_check_var() - check and adjust framebuffer variable parameters.
+ * @var:       framebuffer variable parameters
+ * @fbi:       framebuffer information pointer
+ */
+static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 vtotal;
+       u32 htotal;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       if (var->xres_virtual < var->xres)
+               var->xres_virtual = var->xres;
+       if (var->yres_virtual < var->yres)
+               var->yres_virtual = var->yres;
+
+       if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
+           (var->bits_per_pixel != 16))
+               var->bits_per_pixel = default_bpp;
+
+       switch (var->bits_per_pixel) {
+       case 16:
+               var->red.length = 5;
+               var->red.offset = 11;
+               var->red.msb_right = 0;
+
+               var->green.length = 6;
+               var->green.offset = 5;
+               var->green.msb_right = 0;
+
+               var->blue.length = 5;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 24:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 0;
+               var->transp.offset = 0;
+               var->transp.msb_right = 0;
+               break;
+       case 32:
+               var->red.length = 8;
+               var->red.offset = 16;
+               var->red.msb_right = 0;
+
+               var->green.length = 8;
+               var->green.offset = 8;
+               var->green.msb_right = 0;
+
+               var->blue.length = 8;
+               var->blue.offset = 0;
+               var->blue.msb_right = 0;
+
+               var->transp.length = 8;
+               var->transp.offset = 24;
+               var->transp.msb_right = 0;
+               break;
+       }
+
+       if (var->pixclock < 1000) {
+               htotal = var->xres + var->right_margin + var->hsync_len +
+                   var->left_margin;
+               vtotal = var->yres + var->lower_margin + var->vsync_len +
+                   var->upper_margin;
+               var->pixclock = (vtotal * htotal * 6UL) / 100UL;
+               var->pixclock = KHZ2PICOS(var->pixclock);
+               dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n",
+                       var->pixclock);
+       }
+
+       var->height = -1;
+       var->width = -1;
+       var->grayscale = 0;
+
+       /* Preserve sync flags */
+       var->sync |= mx3_fbi->sync;
+       mx3_fbi->sync |= var->sync;
+
+       return 0;
+}
+
+static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf)
+{
+       chan &= 0xffff;
+       chan >>= 16 - bf->length;
+       return chan << bf->offset;
+}
+
+static int mx3fb_setcolreg(unsigned int regno, unsigned int red,
+                          unsigned int green, unsigned int blue,
+                          unsigned int trans, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 val;
+       int ret = 1;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       mutex_lock(&mx3_fbi->mutex);
+       /*
+        * If greyscale is true, then we convert the RGB value
+        * to greyscale no matter what visual we are using.
+        */
+       if (fbi->var.grayscale)
+               red = green = blue = (19595 * red + 38470 * green +
+                                     7471 * blue) >> 16;
+       switch (fbi->fix.visual) {
+       case FB_VISUAL_TRUECOLOR:
+               /*
+                * 16-bit True Colour.  We encode the RGB value
+                * according to the RGB bitfield information.
+                */
+               if (regno < 16) {
+                       u32 *pal = fbi->pseudo_palette;
+
+                       val = chan_to_field(red, &fbi->var.red);
+                       val |= chan_to_field(green, &fbi->var.green);
+                       val |= chan_to_field(blue, &fbi->var.blue);
+
+                       pal[regno] = val;
+
+                       ret = 0;
+               }
+               break;
+
+       case FB_VISUAL_STATIC_PSEUDOCOLOR:
+       case FB_VISUAL_PSEUDOCOLOR:
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return ret;
+}
+
+/**
+ * mx3fb_blank() - blank the display.
+ */
+static int mx3fb_blank(int blank, struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
+
+       dev_dbg(fbi->device, "%s\n", __func__);
+
+       dev_dbg(fbi->device, "blank = %d\n", blank);
+
+       if (mx3_fbi->blank == blank)
+               return 0;
+
+       mutex_lock(&mx3_fbi->mutex);
+       mx3_fbi->blank = blank;
+
+       switch (blank) {
+       case FB_BLANK_POWERDOWN:
+       case FB_BLANK_VSYNC_SUSPEND:
+       case FB_BLANK_HSYNC_SUSPEND:
+       case FB_BLANK_NORMAL:
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+               break;
+       case FB_BLANK_UNBLANK:
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+               break;
+       }
+       mutex_unlock(&mx3_fbi->mutex);
+
+       return 0;
+}
+
+/**
+ * mx3fb_pan_display() - pan or wrap the display
+ * @var:       variable screen buffer information.
+ * @info:      framebuffer information pointer.
+ *
+ * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+static int mx3fb_pan_display(struct fb_var_screeninfo *var,
+                            struct fb_info *fbi)
+{
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       u32 y_bottom;
+       unsigned long base;
+       off_t offset;
+       dma_cookie_t cookie;
+       struct scatterlist *sg = mx3_fbi->sg;
+       struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan;
+       struct dma_async_tx_descriptor *txd;
+       int ret;
+
+       dev_dbg(fbi->device, "%s [%c]\n", __func__,
+               list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+');
+
+       if (var->xoffset > 0) {
+               dev_dbg(fbi->device, "x panning not supported\n");
+               return -EINVAL;
+       }
+
+       if (fbi->var.xoffset == var->xoffset &&
+           fbi->var.yoffset == var->yoffset)
+               return 0;       /* No change, do nothing */
+
+       y_bottom = var->yoffset;
+
+       if (!(var->vmode & FB_VMODE_YWRAP))
+               y_bottom += var->yres;
+
+       if (y_bottom > fbi->var.yres_virtual)
+               return -EINVAL;
+
+       mutex_lock(&mx3_fbi->mutex);
+
+       offset = (var->yoffset * var->xres_virtual + var->xoffset) *
+               (var->bits_per_pixel / 8);
+       base = fbi->fix.smem_start + offset;
+
+       dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n",
+               mx3_fbi->cur_ipu_buf, base);
+
+       /*
+        * We enable the End of Frame interrupt, which will free a tx-descriptor,
+        * which we will need for the next device_prep_slave_sg(). The
+        * IRQ-handler will disable the IRQ again.
+        */
+       init_completion(&mx3_fbi->flip_cmpl);
+       enable_irq(mx3_fbi->idmac_channel->eof_irq);
+
+       ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10);
+       if (ret <= 0) {
+               mutex_unlock(&mx3_fbi->mutex);
+               dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ?
+                        "user interrupt" : "timeout");
+               return ret ? : -ETIMEDOUT;
+       }
+
+       mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf;
+
+       sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base;
+       sg_set_page(&sg[mx3_fbi->cur_ipu_buf],
+                   virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len,
+                   offset_in_page(fbi->screen_base + offset));
+
+       txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg +
+               mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT);
+       if (!txd) {
+               dev_err(fbi->device,
+                       "Error preparing a DMA transaction descriptor.\n");
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       txd->callback_param     = txd;
+       txd->callback           = mx3fb_dma_done;
+
+       /*
+        * Emulate original mx3fb behaviour: each new call to idmac_tx_submit()
+        * should switch to another buffer
+        */
+       cookie = txd->tx_submit(txd);
+       dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie);
+       if (cookie < 0) {
+               dev_err(fbi->device,
+                       "Error updating SDC buf %d to address=0x%08lX\n",
+                       mx3_fbi->cur_ipu_buf, base);
+               mutex_unlock(&mx3_fbi->mutex);
+               return -EIO;
+       }
+
+       if (mx3_fbi->txd)
+               async_tx_ack(mx3_fbi->txd);
+       mx3_fbi->txd = txd;
+
+       fbi->var.xoffset = var->xoffset;
+       fbi->var.yoffset = var->yoffset;
+
+       if (var->vmode & FB_VMODE_YWRAP)
+               fbi->var.vmode |= FB_VMODE_YWRAP;
+       else
+               fbi->var.vmode &= ~FB_VMODE_YWRAP;
+
+       mutex_unlock(&mx3_fbi->mutex);
+
+       dev_dbg(fbi->device, "Update complete\n");
+
+       return 0;
+}
+
+/*
+ * This structure contains the pointers to the control functions that are
+ * invoked by the core framebuffer driver to perform operations like
+ * blitting, rectangle filling, copy regions and cursor definition.
+ */
+static struct fb_ops mx3fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_set_par = mx3fb_set_par,
+       .fb_check_var = mx3fb_check_var,
+       .fb_setcolreg = mx3fb_setcolreg,
+       .fb_pan_display = mx3fb_pan_display,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_blank = mx3fb_blank,
+};
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks.      Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+
+/*
+ * Suspends the framebuffer and blanks the screen. Power management support
+ */
+static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 1);
+       release_console_sem();
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_disable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, 0);
+
+       }
+       return 0;
+}
+
+/*
+ * Resumes the framebuffer and unblanks the screen. Power management support
+ */
+static int mx3fb_resume(struct platform_device *pdev)
+{
+       struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
+       struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+
+       if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
+               sdc_enable_channel(mx3_fbi);
+               sdc_set_brightness(mx3fb, drv_data->backlight_level);
+       }
+
+       acquire_console_sem();
+       fb_set_suspend(drv_data->fbi, 0);
+       release_console_sem();
+
+       return 0;
+}
+#else
+#define mx3fb_suspend   NULL
+#define mx3fb_resume    NULL
+#endif
+
+/*
+ * Main framebuffer functions
+ */
+
+/**
+ * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer.
+ * @fbi:       framebuffer information pointer
+ * @return:    Error code indicating success or failure
+ *
+ * This buffer is remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the cache. Once this
+ * area is remapped, all virtual memory access to the video memory should occur
+ * at the new region.
+ */
+static int mx3fb_map_video_memory(struct fb_info *fbi)
+{
+       int retval = 0;
+       dma_addr_t addr;
+
+       fbi->screen_base = dma_alloc_writecombine(fbi->device,
+                                                 fbi->fix.smem_len,
+                                                 &addr, GFP_DMA);
+
+       if (!fbi->screen_base) {
+               dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n",
+                       fbi->fix.smem_len);
+               retval = -EBUSY;
+               goto err0;
+       }
+
+       fbi->fix.smem_start = addr;
+
+       dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n",
+               (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len);
+
+       fbi->screen_size = fbi->fix.smem_len;
+
+       /* Clear the screen */
+       memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
+
+       return 0;
+
+err0:
+       fbi->fix.smem_len = 0;
+       fbi->fix.smem_start = 0;
+       fbi->screen_base = NULL;
+       return retval;
+}
+
+/**
+ * mx3fb_unmap_video_memory() - de-allocate frame buffer memory.
+ * @fbi:       framebuffer information pointer
+ * @return:    error code indicating success or failure
+ */
+static int mx3fb_unmap_video_memory(struct fb_info *fbi)
+{
+       dma_free_writecombine(fbi->device, fbi->fix.smem_len,
+                             fbi->screen_base, fbi->fix.smem_start);
+
+       fbi->screen_base = 0;
+       fbi->fix.smem_start = 0;
+       fbi->fix.smem_len = 0;
+       return 0;
+}
+
+/**
+ * mx3fb_init_fbinfo() - initialize framebuffer information object.
+ * @return:    initialized framebuffer structure.
+ */
+static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops)
+{
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       int ret;
+
+       /* Allocate sufficient memory for the fb structure */
+       fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev);
+       if (!fbi)
+               return NULL;
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->cookie          = -EINVAL;
+       mx3fbi->cur_ipu_buf     = 0;
+
+       fbi->var.activate       = FB_ACTIVATE_NOW;
+
+       fbi->fbops              = ops;
+       fbi->flags              = FBINFO_FLAG_DEFAULT;
+       fbi->pseudo_palette     = mx3fbi->pseudo_palette;
+
+       mutex_init(&mx3fbi->mutex);
+
+       /* Allocate colormap */
+       ret = fb_alloc_cmap(&fbi->cmap, 16, 0);
+       if (ret < 0) {
+               framebuffer_release(fbi);
+               return NULL;
+       }
+
+       return fbi;
+}
+
+static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
+{
+       struct device *dev = mx3fb->dev;
+       struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data;
+       const char *name = mx3fb_pdata->name;
+       unsigned int irq;
+       struct fb_info *fbi;
+       struct mx3fb_info *mx3fbi;
+       const struct fb_videomode *mode;
+       int ret, num_modes;
+
+       ichan->client = mx3fb;
+       irq = ichan->eof_irq;
+
+       if (ichan->dma_chan.chan_id != IDMAC_SDC_0)
+               return -EINVAL;
+
+       fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops);
+       if (!fbi)
+               return -ENOMEM;
+
+       if (!fb_mode)
+               fb_mode = name;
+
+       if (!fb_mode) {
+               ret = -EINVAL;
+               goto emode;
+       }
+
+       if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) {
+               mode = mx3fb_pdata->mode;
+               num_modes = mx3fb_pdata->num_modes;
+       } else {
+               mode = mx3fb_modedb;
+               num_modes = ARRAY_SIZE(mx3fb_modedb);
+       }
+
+       if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode,
+                         num_modes, NULL, default_bpp)) {
+               ret = -EBUSY;
+               goto emode;
+       }
+
+       fb_videomode_to_modelist(mode, num_modes, &fbi->modelist);
+
+       /* Default Y virtual size is 2x panel size */
+       fbi->var.yres_virtual = fbi->var.yres * 2;
+
+       mx3fb->fbi = fbi;
+
+       /* set Display Interface clock period */
+       mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER);
+       /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+       sdc_set_brightness(mx3fb, 255);
+       sdc_set_global_alpha(mx3fb, true, 0xFF);
+       sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0);
+
+       mx3fbi                  = fbi->par;
+       mx3fbi->idmac_channel   = ichan;
+       mx3fbi->ipu_ch          = ichan->dma_chan.chan_id;
+       mx3fbi->mx3fb           = mx3fb;
+       mx3fbi->blank           = FB_BLANK_NORMAL;
+
+       init_completion(&mx3fbi->flip_cmpl);
+       disable_irq(ichan->eof_irq);
+       dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq);
+       ret = mx3fb_set_par(fbi);
+       if (ret < 0)
+               goto esetpar;
+
+       mx3fb_blank(FB_BLANK_UNBLANK, fbi);
+
+       dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+
+       ret = register_framebuffer(fbi);
+       if (ret < 0)
+               goto erfb;
+
+       return 0;
+
+erfb:
+esetpar:
+emode:
+       fb_dealloc_cmap(&fbi->cmap);
+       framebuffer_release(fbi);
+
+       return ret;
+}
+
+static bool chan_filter(struct dma_chan *chan, void *arg)
+{
+       struct dma_chan_request *rq = arg;
+       struct device *dev;
+       struct mx3fb_platform_data *mx3fb_pdata;
+
+       if (!rq)
+               return false;
+
+       dev = rq->mx3fb->dev;
+       mx3fb_pdata = dev->platform_data;
+
+       return rq->id == chan->chan_id &&
+               mx3fb_pdata->dma_dev == chan->device->dev;
+}
+
+static void release_fbi(struct fb_info *fbi)
+{
+       mx3fb_unmap_video_memory(fbi);
+
+       fb_dealloc_cmap(&fbi->cmap);
+
+       unregister_framebuffer(fbi);
+       framebuffer_release(fbi);
+}
+
+static int mx3fb_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       int ret;
+       struct resource *sdc_reg;
+       struct mx3fb_data *mx3fb;
+       dma_cap_mask_t mask;
+       struct dma_chan *chan;
+       struct dma_chan_request rq;
+
+       /*
+        * Display Interface (DI) and Synchronous Display Controller (SDC)
+        * registers
+        */
+       sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!sdc_reg)
+               return -EINVAL;
+
+       mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+       if (!mx3fb)
+               return -ENOMEM;
+
+       spin_lock_init(&mx3fb->lock);
+
+       mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg));
+       if (!mx3fb->reg_base) {
+               ret = -ENOMEM;
+               goto eremap;
+       }
+
+       pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
+                mx3fb->reg_base);
+
+       /* IDMAC interface */
+       dmaengine_get();
+
+       mx3fb->dev = dev;
+       platform_set_drvdata(pdev, mx3fb);
+
+       rq.mx3fb = mx3fb;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+       dma_cap_set(DMA_PRIVATE, mask);
+       rq.id = IDMAC_SDC_0;
+       chan = dma_request_channel(mask, chan_filter, &rq);
+       if (!chan) {
+               ret = -EBUSY;
+               goto ersdc0;
+       }
+
+       ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
+       if (ret < 0)
+               goto eisdc0;
+
+       mx3fb->backlight_level = 255;
+
+       return 0;
+
+eisdc0:
+       dma_release_channel(chan);
+ersdc0:
+       dmaengine_put();
+       iounmap(mx3fb->reg_base);
+eremap:
+       kfree(mx3fb);
+       dev_err(dev, "mx3fb: failed to register fb\n");
+       return ret;
+}
+
+static int mx3fb_remove(struct platform_device *dev)
+{
+       struct mx3fb_data *mx3fb = platform_get_drvdata(dev);
+       struct fb_info *fbi = mx3fb->fbi;
+       struct mx3fb_info *mx3_fbi = fbi->par;
+       struct dma_chan *chan;
+
+       chan = &mx3_fbi->idmac_channel->dma_chan;
+       release_fbi(fbi);
+
+       dma_release_channel(chan);
+       dmaengine_put();
+
+       iounmap(mx3fb->reg_base);
+       kfree(mx3fb);
+       return 0;
+}
+
+static struct platform_driver mx3fb_driver = {
+       .driver = {
+                  .name = MX3FB_NAME,
+       },
+       .probe = mx3fb_probe,
+       .remove = mx3fb_remove,
+       .suspend = mx3fb_suspend,
+       .resume = mx3fb_resume,
+};
+
+/*
+ * Parse user specified options (`video=mx3fb:')
+ * example:
+ *     video=mx3fb:bpp=16
+ */
+static int mx3fb_setup(void)
+{
+#ifndef MODULE
+       char *opt, *options = NULL;
+
+       if (fb_get_options("mx3fb", &options))
+               return -ENODEV;
+
+       if (!options || !*options)
+               return 0;
+
+       while ((opt = strsep(&options, ",")) != NULL) {
+               if (!*opt)
+                       continue;
+               if (!strncmp(opt, "bpp=", 4))
+                       default_bpp = simple_strtoul(opt + 4, NULL, 0);
+               else
+                       fb_mode = opt;
+       }
+#endif
+
+       return 0;
+}
+
+static int __init mx3fb_init(void)
+{
+       int ret = mx3fb_setup();
+
+       if (ret < 0)
+               return ret;
+
+       ret = platform_driver_register(&mx3fb_driver);
+       return ret;
+}
+
+static void __exit mx3fb_exit(void)
+{
+       platform_driver_unregister(&mx3fb_driver);
+}
+
+module_init(mx3fb_init);
+module_exit(mx3fb_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MX3 framebuffer driver");
+MODULE_ALIAS("platform:" MX3FB_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index 6fd7cb8..6aaddb4 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -87,7 +87,6 @@
 
 	strcpy(chan->adapter.name, name);
 	chan->adapter.owner = THIS_MODULE;
-	chan->adapter.id = I2C_HW_B_NVIDIA;
 	chan->adapter.class = i2c_class;
 	chan->adapter.algo_data = &chan->algo;
 	chan->adapter.dev.parent = &chan->par->pci_dev->dev;
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index 6e2ea75..ab39492 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -800,14 +800,14 @@
 	/* FIXME:
 	 * According to errata some platforms have a clock rate limitiation
 	 */
-	lcdc.lcd_ck = clk_get(NULL, "lcd_ck");
+	lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
 	if (IS_ERR(lcdc.lcd_ck)) {
 		dev_err(fbdev->dev, "unable to access LCD clock\n");
 		r = PTR_ERR(lcdc.lcd_ck);
 		goto fail0;
 	}
 
-	tc_ck = clk_get(NULL, "tc_ck");
+	tc_ck = clk_get(fbdev->dev, "tc_ck");
 	if (IS_ERR(tc_ck)) {
 		dev_err(fbdev->dev, "unable to access TC clock\n");
 		r = PTR_ERR(tc_ck);
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c
index 783d4ad..574b29e 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/savage/savagefb-i2c.c
@@ -137,7 +137,6 @@
 	if (chan->par) {
 		strcpy(chan->adapter.name, name);
 		chan->adapter.owner		= THIS_MODULE;
-		chan->adapter.id		= I2C_HW_B_SAVAGE;
 		chan->adapter.algo_data		= &chan->algo;
 		chan->adapter.dev.parent	= &chan->par->pcidev->dev;
 		chan->algo.udelay		= 10;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3efa12f..09a3d55 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -187,10 +187,10 @@
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
 	help
-	  Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-	  enable the OMAP1610/OMAP1710 watchdog timer.
+	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
 	tristate "PNX4008 Watchdog"
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 993e5f5..5531691 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 8dc7109..2ba8f95 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -298,6 +298,14 @@
 		frame_list[i] = pfn_to_mfn(pfn);
 
 		scrub_page(page);
+
+		if (!PageHighMem(page)) {
+			ret = HYPERVISOR_update_va_mapping(
+				(unsigned long)__va(pfn << PAGE_SHIFT),
+				__pte_ma(0), 0);
+			BUG_ON(ret);
+                }
+
 	}
 
 	/* Ensure that ballooned highmem pages don't have kmaps. */
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index 875a4c5..a9592d9 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -291,7 +291,7 @@
 static int xenbus_write_transaction(unsigned msg_type,
 				    struct xenbus_file_priv *u)
 {
-	int rc, ret;
+	int rc;
 	void *reply;
 	struct xenbus_transaction_holder *trans = NULL;
 	LIST_HEAD(staging_q);
@@ -326,15 +326,14 @@
 	}
 
 	mutex_lock(&u->reply_mutex);
-	ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
-	if (!ret)
-		ret = queue_reply(&staging_q, reply, u->u.msg.len);
-	if (!ret) {
+	rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg));
+	if (!rc)
+		rc = queue_reply(&staging_q, reply, u->u.msg.len);
+	if (!rc) {
 		list_splice_tail(&staging_q, &u->read_buffers);
 		wake_up(&u->read_waitq);
 	} else {
 		queue_cleanup(&staging_q);
-		rc = ret;
 	}
 	mutex_unlock(&u->reply_mutex);
 
diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig
new file mode 100644
index 0000000..74e0723
--- /dev/null
+++ b/fs/9p/Kconfig
@@ -0,0 +1,10 @@
+config 9P_FS
+	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+	depends on INET && NET_9P && EXPERIMENTAL
+	help
+	  If you say Y here, you will get experimental support for
+	  Plan 9 resource sharing via the 9P2000 protocol.
+
+	  See <http://v9fs.sf.net> for more information.
+
+	  If unsure, say N.
diff --git a/fs/Kconfig b/fs/Kconfig
index 51307b0..93945dd 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -27,141 +27,8 @@
 	default y if EXT4_FS=y && EXT4_FS_XATTR
 	default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
 
-config REISERFS_FS
-	tristate "Reiserfs support"
-	help
-	  Stores not just filenames but the files themselves in a balanced
-	  tree.  Uses journalling.
-
-	  Balanced trees are more efficient than traditional file system
-	  architectural foundations.
-
-	  In general, ReiserFS is as fast as ext2, but is very efficient with
-	  large directories and small files.  Additional patches are needed
-	  for NFS and quotas, please see <http://www.namesys.com/> for links.
-
-	  It is more easily extended to have features currently found in
-	  database and keyword search systems than block allocation based file
-	  systems are.  The next version will be so extended, and will support
-	  plugins consistent with our motto ``It takes more than a license to
-	  make source code open.''
-
-	  Read <http://www.namesys.com/> to learn more about reiserfs.
-
-	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
-	  If you like it, you can pay us to add new features to it that you
-	  need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
-	bool "Enable reiserfs debug mode"
-	depends on REISERFS_FS
-	help
-	  If you set this to Y, then ReiserFS will perform every check it can
-	  possibly imagine of its internal consistency throughout its
-	  operation.  It will also go substantially slower.  More than once we
-	  have forgotten that this was on, and then gone despondent over the
-	  latest benchmarks.:-) Use of this option allows our team to go all
-	  out in checking for consistency when debugging without fear of its
-	  effect on end users.  If you are on the verge of sending in a bug
-	  report, say Y and you might get a useful error message.  Almost
-	  everyone should say N.
-
-config REISERFS_PROC_INFO
-	bool "Stats in /proc/fs/reiserfs"
-	depends on REISERFS_FS && PROC_FS
-	help
-	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
-	  various ReiserFS statistics and internal data at the expense of
-	  making your kernel or module slightly larger (+8 KB). This also
-	  increases the amount of kernel memory required for each mount.
-	  Almost everyone but ReiserFS developers and people fine-tuning
-	  reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
-	bool "ReiserFS extended attributes"
-	depends on REISERFS_FS
-	help
-	  Extended attributes are name:value pairs associated with inodes by
-	  the kernel or by users (see the attr(5) manual page, or visit
-	  <http://acl.bestbits.at/> for details).
-
-	  If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
-	bool "ReiserFS POSIX Access Control Lists"
-	depends on REISERFS_FS_XATTR
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
-	bool "ReiserFS Security Labels"
-	depends on REISERFS_FS_XATTR
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the ReiserFS filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_FS
-	tristate "JFS filesystem support"
-	select NLS
-	help
-	  This is a port of IBM's Journaled Filesystem .  More information is
-	  available in the file <file:Documentation/filesystems/jfs.txt>.
-
-	  If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
-	bool "JFS POSIX Access Control Lists"
-	depends on JFS_FS
-	select FS_POSIX_ACL
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-	  To learn more about Access Control Lists, visit the Posix ACLs for
-	  Linux website <http://acl.bestbits.at/>.
-
-	  If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
-	bool "JFS Security Labels"
-	depends on JFS_FS
-	help
-	  Security labels support alternative access control models
-	  implemented by security modules like SELinux.  This option
-	  enables an extended attribute handler for file security
-	  labels in the jfs filesystem.
-
-	  If you are not using a security module that requires using
-	  extended attributes for file security labels, say N.
-
-config JFS_DEBUG
-	bool "JFS debugging"
-	depends on JFS_FS
-	help
-	  If you are experiencing any problems with the JFS filesystem, say
-	  Y here.  This will result in additional debugging messages to be
-	  written to the system log.  Under normal circumstances, this
-	  results in very little overhead.
-
-config JFS_STATISTICS
-	bool "JFS statistics"
-	depends on JFS_FS
-	help
-	  Enabling this option will cause statistics from the JFS file system
-	  to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
 
 config FS_POSIX_ACL
 # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
@@ -182,111 +49,8 @@
 
 source "fs/xfs/Kconfig"
 source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
-	tristate "OCFS2 file system support"
-	depends on NET && SYSFS
-	select CONFIGFS_FS
-	select JBD2
-	select CRC32
-	select QUOTA
-	select QUOTA_TREE
-	help
-	  OCFS2 is a general purpose extent based shared disk cluster file
-	  system with many similarities to ext3. It supports 64 bit inode
-	  numbers, and has automatically extending metadata groups which may
-	  also make it attractive for non-clustered use.
-
-	  You'll want to install the ocfs2-tools package in order to at least
-	  get "mount.ocfs2".
-
-	  Project web page:    http://oss.oracle.com/projects/ocfs2
-	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
-	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
-	  For more information on OCFS2, see the file
-	  <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
-	tristate "O2CB Kernelspace Clustering"
-	depends on OCFS2_FS
-	default y
-	help
-	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
-	  Cluster Base.  It only requires a very small userspace component
-	  to configure it. This comes with the standard ocfs2-tools package.
-	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
-	  It cannot manage any other cluster applications.
-
-	  It is always safe to say Y here, as the clustering method is
-	  run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
-	tristate "OCFS2 Userspace Clustering"
-	depends on OCFS2_FS && DLM
-	default y
-	help
-	  This option will allow OCFS2 to use userspace clustering services
-	  in conjunction with the DLM in fs/dlm.  If you are using a
-	  userspace cluster manager, say Y here.
-
-	  It is safe to say Y, as the clustering method is run-time
-	  selectable.
-
-config OCFS2_FS_STATS
-	bool "OCFS2 statistics"
-	depends on OCFS2_FS
-	default y
-	help
-	  This option allows some fs statistics to be captured. Enabling
-	  this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
-	bool "OCFS2 logging support"
-	depends on OCFS2_FS
-	default y
-	help
-	  The ocfs2 filesystem has an extensive logging system.  The system
-	  allows selection of events to log via files in /sys/o2cb/logmask/.
-	  This option will enlarge your kernel, but it allows debugging of
-	  ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
-	bool "OCFS2 expensive checks"
-	depends on OCFS2_FS
-	default n
-	help
-	  This option will enable expensive consistency checks. Enable
-	  this option for debugging only as it is likely to decrease
-	  performance of the filesystem.
-
-config OCFS2_FS_POSIX_ACL
-	bool "OCFS2 POSIX Access Control Lists"
-	depends on OCFS2_FS
-	select FS_POSIX_ACL
-	default n
-	help
-	  Posix Access Control Lists (ACLs) support permissions for users and
-	  groups beyond the owner/group/world scheme.
-
-config BTRFS_FS
-	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
-	depends on EXPERIMENTAL
-	select LIBCRC32C
-	select ZLIB_INFLATE
-	select ZLIB_DEFLATE
-	help
-	  Btrfs is a new filesystem with extents, writable snapshotting,
-	  support for multiple devices and many more features.
-
-	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
-	  FINALIZED.  You should say N here unless you are interested in
-	  testing Btrfs with non-critical data.
-
-	  To compile this file system support as a module, choose M here. The
-	  module will be called btrfs.
-
-	  If unsure, say N.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
 
 endif # BLOCK
 
@@ -348,64 +112,9 @@
 	depends on XFS_QUOTA || QUOTA
 	default y
 
-config AUTOFS_FS
-	tristate "Kernel automounter support"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from the autofs
-	  package; you can find the location in <file:Documentation/Changes>.
-	  You also want to answer Y to "NFS file system support", below.
-
-	  If you want to use the newer version of the automounter with more
-	  features, say N here and say Y to "Kernel automounter v4 support",
-	  below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs.
-
-	  If you are not a part of a fairly large, distributed network, you
-	  probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
-	tristate "Kernel automounter version 4 support (also supports v3)"
-	help
-	  The automounter is a tool to automatically mount remote file systems
-	  on demand. This implementation is partially kernel-based to reduce
-	  overhead in the already-mounted case; this is unlike the BSD
-	  automounter (amd), which is a pure user space daemon.
-
-	  To use the automounter you need the user-space tools from
-	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
-	  want to answer Y to "NFS file system support", below.
-
-	  To compile this support as a module, choose M here: the module will be
-	  called autofs4.  You will need to add "alias autofs autofs4" to your
-	  modules configuration file.
-
-	  If you are not a part of a fairly large, distributed network or
-	  don't have a laptop which needs to dynamically reconfigure to the
-	  local network, you probably do not need an automounter, and can say
-	  N here.
-
-config FUSE_FS
-	tristate "FUSE (Filesystem in Userspace) support"
-	help
-	  With FUSE it is possible to implement a fully functional filesystem
-	  in a userspace program.
-
-	  There's also companion library: libfuse.  This library along with
-	  utilities is available from the FUSE homepage:
-	  <http://fuse.sourceforge.net/>
-
-	  See <file:Documentation/filesystems/fuse.txt> for more information.
-	  See <file:Documentation/Changes> for needed library/utility version.
-
-	  If you want to develop a userspace FS, or if you want to use
-	  a filesystem based on FUSE, answer Y or M.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
 
 config GENERIC_ACL
 	bool
@@ -414,64 +123,8 @@
 if BLOCK
 menu "CD-ROM/DVD Filesystems"
 
-config ISO9660_FS
-	tristate "ISO 9660 CDROM file system support"
-	help
-	  This is the standard file system used on CD-ROMs.  It was previously
-	  known as "High Sierra File System" and is called "hsfs" on other
-	  Unix systems.  The so-called Rock-Ridge extensions which allow for
-	  long Unix filenames and symbolic links are also supported by this
-	  driver.  If you have a CD-ROM drive and want to do more with it than
-	  just listen to audio CDs and watch its LEDs, say Y (and read
-	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>), thereby
-	  enlarging your kernel by about 27 KB; otherwise say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called isofs.
-
-config JOLIET
-	bool "Microsoft Joliet CDROM extensions"
-	depends on ISO9660_FS
-	select NLS
-	help
-	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
-	  which allows for long filenames in unicode format (unicode is the
-	  new 16 bit character code, successor to ASCII, which encodes the
-	  characters of almost all languages of the world; see
-	  <http://www.unicode.org/> for more information).  Say Y here if you
-	  want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
-	bool "Transparent decompression extension"
-	depends on ISO9660_FS
-	select ZLIB_INFLATE
-	help
-	  This is a Linux-specific extension to RockRidge which lets you store
-	  data in compressed form on a CD-ROM and have it transparently
-	  decompressed when the CD-ROM is accessed.  See
-	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
-	  necessary to create such a filesystem.  Say Y here if you want to be
-	  able to read such compressed CD-ROMs.
-
-config UDF_FS
-	tristate "UDF file system support"
-	select CRC_ITU_T
-	help
-	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
-	  you intend to mount DVD discs or CDRW's written in packet mode, or
-	  if written to by other UDF utilities, such as DirectCD.
-	  Please read <file:Documentation/filesystems/udf.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called udf.
-
-	  If unsure, say N.
-
-config UDF_NLS
-	bool
-	default y
-	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -479,182 +132,8 @@
 if BLOCK
 menu "DOS/FAT/NT Filesystems"
 
-config FAT_FS
-	tristate
-	select NLS
-	help
-	  If you want to use one of the FAT-based file systems (the MS-DOS and
-	  VFAT (Windows 95) file systems), then you must say Y or M here
-	  to include FAT support. You will then be able to mount partitions or
-	  diskettes with FAT-based file systems and transparently access the
-	  files on them, i.e. MSDOS files will look and behave just like all
-	  other Unix files.
-
-	  This FAT support is not a file system in itself, it only provides
-	  the foundation for the other file systems. You will have to say Y or
-	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
-	  order to make use of it.
-
-	  Another way to read and write MSDOS floppies and hard drive
-	  partitions from within Linux (but not transparently) is with the
-	  mtools ("man mtools") program suite. You don't need to say Y here in
-	  order to do that.
-
-	  If you need to move large files on floppies between a DOS and a
-	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
-	  file system and use GNU tar's M option. GNU tar is a program
-	  available for Unix and DOS ("man tar" or "info tar").
-
-	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
-	  say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  fat.  Note that if you compile the FAT support as a module, you
-	  cannot compile any of the FAT-based file systems into the kernel
-	  -- they will have to be modules as well.
-
-config MSDOS_FS
-	tristate "MSDOS fs support"
-	select FAT_FS
-	help
-	  This allows you to mount MSDOS partitions of your hard drive (unless
-	  they are compressed; to access compressed MSDOS partitions under
-	  Linux, you can either use the DOS emulator DOSEMU, described in the
-	  DOSEMU-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
-	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
-	  intend to use dosemu with a non-compressed MSDOS partition, say Y
-	  here) and MSDOS floppies. This means that file access becomes
-	  transparent, i.e. the MSDOS files look and behave just like all
-	  other Unix files.
-
-	  If you have Windows 95 or Windows NT installed on your MSDOS
-	  partitions, you should use the VFAT file system (say Y to "VFAT fs
-	  support" below), or you will not be able to see the long filenames
-	  generated by Windows 95 / Windows NT.
-
-	  This option will enlarge your kernel by about 7 KB. If unsure,
-	  answer Y. This will only work if you said Y to "DOS FAT fs support"
-	  as well. To compile this as a module, choose M here: the module will
-	  be called msdos.
-
-config VFAT_FS
-	tristate "VFAT (Windows-95) fs support"
-	select FAT_FS
-	help
-	  This option provides support for normal Windows file systems with
-	  long filenames.  That includes non-compressed FAT-based file systems
-	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
-	  programs from the mtools package.
-
-	  The VFAT support enlarges your kernel by about 10 KB and it only
-	  works if you said Y to the "DOS FAT fs support" above.  Please read
-	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
-	  unsure, say Y.
-
-	  To compile this as a module, choose M here: the module will be called
-	  vfat.
-
-config FAT_DEFAULT_CODEPAGE
-	int "Default codepage for FAT"
-	depends on MSDOS_FS || VFAT_FS
-	default 437
-	help
-	  This option should be set to the codepage of your FAT filesystems.
-	  It can be overridden with the "codepage" mount option.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
-	string "Default iocharset for FAT"
-	depends on VFAT_FS
-	default "iso8859-1"
-	help
-	  Set this to the default input/output character set you'd
-	  like FAT to use. It should probably match the character set
-	  that most of your FAT filesystems use, and can be overridden
-	  with the "iocharset" mount option for FAT filesystems.
-	  Note that "utf8" is not recommended for FAT filesystems.
-	  If unsure, you shouldn't set "utf8" here.
-	  See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
-	tristate "NTFS file system support"
-	select NLS
-	help
-	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
-	  Saying Y or M here enables read support.  There is partial, but
-	  safe, write support available.  For write support you must also
-	  say Y to "NTFS write support" below.
-
-	  There are also a number of user-space tools available, called
-	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
-	  without NTFS support enabled in the kernel.
-
-	  This is a rewrite from scratch of Linux NTFS support and replaced
-	  the old NTFS code starting with Linux 2.5.11.  A backport to
-	  the Linux 2.4 kernel series is separately available as a patch
-	  from the project web site.
-
-	  For more information see <file:Documentation/filesystems/ntfs.txt>
-	  and <http://www.linux-ntfs.org/>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ntfs.
-
-	  If you are not using Windows NT, 2000, XP or 2003 in addition to
-	  Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
-	bool "NTFS debugging support"
-	depends on NTFS_FS
-	help
-	  If you are experiencing any problems with the NTFS file system, say
-	  Y here.  This will result in additional consistency checks to be
-	  performed by the driver as well as additional debugging messages to
-	  be written to the system log.  Note that debugging messages are
-	  disabled by default.  To enable them, supply the option debug_msgs=1
-	  at the kernel command line when booting the kernel or as an option
-	  to insmod when loading the ntfs module.  Once the driver is active,
-	  you can enable debugging messages by doing (as root):
-	  echo 1 > /proc/sys/fs/ntfs-debug
-	  Replacing the "1" with "0" would disable debug messages.
-
-	  If you leave debugging messages disabled, this results in little
-	  overhead, but enabling debug messages results in very significant
-	  slowdown of the system.
-
-	  When reporting bugs, please try to have available a full dump of
-	  debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
-	bool "NTFS write support"
-	depends on NTFS_FS
-	help
-	  This enables the partial, but safe, write support in the NTFS driver.
-
-	  The only supported operation is overwriting existing files, without
-	  changing the file length.  No file or directory creation, deletion or
-	  renaming is possible.  Note only non-resident files can be written to
-	  so you may find that some very small files (<500 bytes or so) cannot
-	  be written to.
-
-	  While we cannot guarantee that it will not damage any data, we have
-	  so far not received a single report where the driver would have
-	  damaged someones data so we assume it is perfectly safe to use.
-
-	  Note:  While write support is safe in this version (a rewrite from
-	  scratch of the NTFS support), it should be noted that the old NTFS
-	  write support, included in Linux 2.5.10 and before (since 1997),
-	  is not safe.
-
-	  This is currently useful with TopologiLinux.  TopologiLinux is run
-	  on top of any DOS/Microsoft Windows system without partitioning your
-	  hard disk.  Unlike other Linux distributions TopologiLinux does not
-	  need its own partition.  For more information see
-	  <http://topologi-linux.sourceforge.net/>
-
-	  It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
 
 endmenu
 endif # BLOCK
@@ -662,30 +141,7 @@
 menu "Pseudo filesystems"
 
 source "fs/proc/Kconfig"
-
-config SYSFS
-	bool "sysfs file system support" if EMBEDDED
-	default y
-	help
-	The sysfs filesystem is a virtual filesystem that the kernel uses to
-	export internal kernel objects, their attributes, and their
-	relationships to one another.
-
-	Users can use sysfs to ascertain useful information about the running
-	kernel, such as the devices the kernel has discovered on each bus and
-	which driver each is bound to. sysfs can also be used to tune devices
-	and other kernel subsystems.
-
-	Some system agents rely on the information in sysfs to operate.
-	/sbin/hotplug uses device and object attributes in sysfs to assist in
-	delegating policy decisions, like persistently naming devices.
-
-	sysfs is currently used by the block subsystem to mount the root
-	partition.  If sysfs is disabled you must specify the boot device on
-	the kernel boot command line via its major and minor numbers.  For
-	example, "root=03:01" for /dev/hda1.
-
-	Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
 
 config TMPFS
 	bool "Virtual memory file system support (former shm fs)"
@@ -726,17 +182,7 @@
 config HUGETLB_PAGE
 	def_bool HUGETLBFS
 
-config CONFIGFS_FS
-	tristate "Userspace-driven configuration filesystem"
-	depends on SYSFS
-	help
-	  configfs is a ram-based filesystem that provides the converse
-	  of sysfs's functionality. Where sysfs is a filesystem-based
-	  view of kernel objects, configfs is a filesystem-based manager
-	  of kernel objects, or config_items.
-
-	  Both sysfs and configfs can and should exist together on the
-	  same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
 
 endmenu
 
@@ -755,425 +201,27 @@
 
 if MISC_FILESYSTEMS
 
-config ADFS_FS
-	tristate "ADFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Acorn Disc Filing System is the standard file system of the
-	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
-	  systems and the Acorn Archimedes range of machines. If you say Y
-	  here, Linux will be able to read from ADFS partitions on hard drives
-	  and from ADFS-formatted floppy discs. If you also want to be able to
-	  write to those devices, say Y to "ADFS write support" below.
-
-	  The ADFS partition should be the first partition (i.e.,
-	  /dev/[hs]d?1) on each of your drives. Please read the file
-	  <file:Documentation/filesystems/adfs.txt> for further details.
-
-	  To compile this code as a module, choose M here: the module will be
-	  called adfs.
-
-	  If unsure, say N.
-
-config ADFS_FS_RW
-	bool "ADFS write support (DANGEROUS)"
-	depends on ADFS_FS
-	help
-	  If you say Y here, you will be able to write to ADFS partitions on
-	  hard drives and ADFS-formatted floppy disks. This is experimental
-	  codes, so if you're unsure, say N.
-
-config AFFS_FS
-	tristate "Amiga FFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  The Fast File System (FFS) is the common file system used on hard
-	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
-	  if you want to be able to read and write files from and to an Amiga
-	  FFS partition on your hard drive.  Amiga floppies however cannot be
-	  read with this driver due to an incompatibility of the floppy
-	  controller used in an Amiga and the standard floppy controller in
-	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
-	  and <file:fs/affs/Changes>.
-
-	  With this driver you can also mount disk files used by Bernd
-	  Schmidt's Un*X Amiga Emulator
-	  (<http://www.freiburg.linux.de/~uae/>).
-	  If you want to do this, you will also need to say Y or M to "Loop
-	  device support", above.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called affs.  If unsure, say N.
-
-config ECRYPT_FS
-	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
-	help
-	  Encrypted filesystem that operates on the VFS layer.  See
-	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
-	  eCryptfs.  Userspace components are required and can be
-	  obtained from <http://ecryptfs.sf.net>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called ecryptfs.
-
-config HFS_FS
-	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  If you say Y here, you will be able to mount Macintosh-formatted
-	  floppy disks and hard drive partitions with full read-write access.
-	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
-	  the available mount options.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hfs.
-
-config HFSPLUS_FS
-	tristate "Apple Extended HFS file system support"
-	depends on BLOCK
-	select NLS
-	select NLS_UTF8
-	help
-	  If you say Y here, you will be able to mount extended format
-	  Macintosh-formatted hard drive partitions with full read-write access.
-
-	  This file system is often called HFS+ and was introduced with
-	  MacOS 8. It includes all Mac specific filesystem data such as
-	  data forks and creator codes, but it also has several UNIX
-	  style features such as file ownership and permissions.
-
-config BEFS_FS
-	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	select NLS
-	help
-	  The BeOS File System (BeFS) is the native file system of Be, Inc's
-	  BeOS. Notable features include support for arbitrary attributes
-	  on files and directories, and database-like indices on selected
-	  attributes. (Also note that this driver doesn't make those features
-	  available at this time). It is a 64 bit filesystem, so it supports
-	  extremely large volumes and files.
-
-	  If you use this filesystem, you should also say Y to at least one
-	  of the NLS (native language support) options below.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be
-	  called befs.
-
-config BEFS_DEBUG
-	bool "Debug BeFS"
-	depends on BEFS_FS
-	help
-	  If you say Y here, you can use the 'debug' mount option to enable
-	  debugging output from the driver.
-
-config BFS_FS
-	tristate "BFS file system support (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  Boot File System (BFS) is a file system used under SCO UnixWare to
-	  allow the bootloader access to the kernel image and other important
-	  files during the boot process.  It is usually mounted under /stand
-	  and corresponds to the slice marked as "STAND" in the UnixWare
-	  partition.  You should say Y if you want to read or write the files
-	  on your /stand slice from within Linux.  You then also need to say Y
-	  to "UnixWare slices support", below.  More information about the BFS
-	  file system is contained in the file
-	  <file:Documentation/filesystems/bfs.txt>.
-
-	  If you don't know what this is about, say N.
-
-	  To compile this as a module, choose M here: the module will be called
-	  bfs.  Note that the file system of your root partition (the one
-	  containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
-	tristate "EFS file system support (read only) (EXPERIMENTAL)"
-	depends on BLOCK && EXPERIMENTAL
-	help
-	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
-	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
-	  uses the XFS file system for hard disk partitions however).
-
-	  This implementation only offers read-only access. If you don't know
-	  what all this is about, it's safe to say N. For more information
-	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
-	  To compile the EFS file system support as a module, choose M here: the
-	  module will be called efs.
-
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
 source "fs/jffs2/Kconfig"
 # UBIFS File system configuration
 source "fs/ubifs/Kconfig"
-
-config CRAMFS
-	tristate "Compressed ROM file system support (cramfs)"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for CramFs (Compressed ROM File
-	  System).  CramFs is designed to be a simple, small, and compressed
-	  file system for ROM based embedded systems.  CramFs is read-only,
-	  limited to 256MB file systems (with 16MB files), and doesn't support
-	  16/32 bits uid/gid, hard links and timestamps.
-
-	  See <file:Documentation/filesystems/cramfs.txt> and
-	  <file:fs/cramfs/README> for further information.
-
-	  To compile this as a module, choose M here: the module will be called
-	  cramfs.  Note that the root file system (the one containing the
-	  directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS
-	tristate "SquashFS 4.0 - Squashed file system support"
-	depends on BLOCK
-	select ZLIB_INFLATE
-	help
-	  Saying Y here includes support for SquashFS 4.0 (a Compressed
-	  Read-Only File System).  Squashfs is a highly compressed read-only
-	  filesystem for Linux.  It uses zlib compression to compress both
-	  files, inodes and directories.  Inodes in the system are very small
-	  and all blocks are packed to minimise data overhead. Block sizes
-	  greater than 4K are supported up to a maximum of 1 Mbytes (default
-	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
-	  (larger than 4GB), full uid/gid information, hard links and
-	  timestamps.  
-
-	  Squashfs is intended for general read-only filesystem use, for
-	  archival use (i.e. in cases where a .tar.gz file may be used), and in
-	  embedded systems where low overhead is needed.  Further information
-	  and tools are available from http://squashfs.sourceforge.net.
-
-	  If you want to compile this as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/modules.txt>.  The module
-	  will be called squashfs.  Note that the root file system (the one
-	  containing the directory /) cannot be compiled as a module.
-
-	  If unsure, say N.
-
-config SQUASHFS_EMBEDDED
-
-	bool "Additional option for memory-constrained systems" 
-	depends on SQUASHFS
-	default n
-	help
-	  Saying Y here allows you to specify cache size.
-
-	  If unsure, say N.
-
-config SQUASHFS_FRAGMENT_CACHE_SIZE
-	int "Number of fragments cached" if SQUASHFS_EMBEDDED
-	depends on SQUASHFS
-	default "3"
-	help
-	  By default SquashFS caches the last 3 fragments read from
-	  the filesystem.  Increasing this amount may mean SquashFS
-	  has to re-read fragments less often from disk, at the expense
-	  of extra system memory.  Decreasing this amount will mean
-	  SquashFS uses less memory at the expense of extra reads from disk.
-
-	  Note there must be at least one cached fragment.  Anything
-	  much more than three will probably not make much difference.
-
-config VXFS_FS
-	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
-	depends on BLOCK
-	help
-	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
-	  file system format.  VERITAS VxFS(TM) is the standard file system
-	  of SCO UnixWare (and possibly others) and optionally available
-	  for Sunsoft Solaris, HP-UX and many other operating systems.
-	  Currently only readonly access is supported.
-
-	  NOTE: the file system type as used by mount(1), mount(2) and
-	  fstab(5) is 'vxfs' as it describes the file system format, not
-	  the actual driver.
-
-	  To compile this as a module, choose M here: the module will be
-	  called freevxfs.  If unsure, say N.
-
-config MINIX_FS
-	tristate "Minix file system support"
-	depends on BLOCK
-	help
-	  Minix is a simple operating system used in many classes about OS's.
-	  The minix file system (method to organize files on a hard disk
-	  partition or a floppy disk) was the original file system for Linux,
-	  but has been superseded by the second extended file system ext2fs.
-	  You don't want to use the minix file system on your hard disk
-	  because of certain built-in restrictions, but it is sometimes found
-	  on older Linux floppy disks.  This option will enlarge your kernel
-	  by about 28 KB. If unsure, say N.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called minix.  Note that the file system of your root
-	  partition (the one containing the directory /) cannot be compiled as
-	  a module.
-
-config OMFS_FS
-	tristate "SonicBlue Optimized MPEG File System support"
-	depends on BLOCK
-	select CRC_ITU_T
-	help
-	  This is the proprietary file system used by the Rio Karma music
-	  player and ReplayTV DVR.  Despite the name, this filesystem is not
-	  more efficient than a standard FS for MPEG files, in fact likely
-	  the opposite is true.  Say Y if you have either of these devices
-	  and wish to mount its disk.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called omfs.  If unsure, say N.
-
-config HPFS_FS
-	tristate "OS/2 HPFS file system support"
-	depends on BLOCK
-	help
-	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
-	  is the file system used for organizing files on OS/2 hard disk
-	  partitions. Say Y if you want to be able to read files from and
-	  write files to an OS/2 HPFS partition on your hard drive. OS/2
-	  floppies however are in regular MSDOS format, so you don't need this
-	  option in order to be able to read them. Read
-	  <file:Documentation/filesystems/hpfs.txt>.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called hpfs.  If unsure, say N.
-
-
-config QNX4FS_FS
-	tristate "QNX4 file system support (read only)"
-	depends on BLOCK
-	help
-	  This is the file system used by the real-time operating systems
-	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
-	  Further information is available at <http://www.qnx.com/>.
-	  Say Y if you intend to mount QNX hard disks or floppies.
-	  Unless you say Y to "QNX4FS read-write support" below, you will
-	  only be able to read these file systems.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called qnx4.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-config QNX4FS_RW
-	bool "QNX4FS write support (DANGEROUS)"
-	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
-	help
-	  Say Y if you want to test write support for QNX4 file systems.
-
-	  It's currently broken, so for now:
-	  answer N.
-
-config ROMFS_FS
-	tristate "ROM file system support"
-	depends on BLOCK
-	---help---
-	  This is a very small read-only file system mainly intended for
-	  initial ram disks of installation disks, but it could be used for
-	  other read-only media as well.  Read
-	  <file:Documentation/filesystems/romfs.txt> for details.
-
-	  To compile this file system support as a module, choose M here: the
-	  module will be called romfs.  Note that the file system of your
-	  root partition (the one containing the directory /) cannot be a
-	  module.
-
-	  If you don't know whether you need it, then you don't need it:
-	  answer N.
-
-
-config SYSV_FS
-	tristate "System V/Xenix/V7/Coherent file system support"
-	depends on BLOCK
-	help
-	  SCO, Xenix and Coherent are commercial Unix systems for Intel
-	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
-	  here would allow you to read from their floppies and hard disk
-	  partitions.
-
-	  If you have floppies or hard disk partitions like that, it is likely
-	  that they contain binaries from those other Unix systems; in order
-	  to run these binaries, you will want to install linux-abi which is
-	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
-	  UnixWare, Dell Unix and System V programs under Linux.  It is
-	  available via FTP (user: ftp) from
-	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
-	  NOTE: that will work only for binaries from Intel-based systems;
-	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
-	  If you only intend to mount files from some other Unix over the
-	  network using NFS, you don't need the System V file system support
-	  (but you need NFS file system support obviously).
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").  Note also that this option has
-	  nothing whatsoever to do with the option "System V IPC". Read about
-	  the System V file system in
-	  <file:Documentation/filesystems/sysv-fs.txt>.
-	  Saying Y here will enlarge your kernel by about 27 KB.
-
-	  To compile this as a module, choose M here: the module will be called
-	  sysv.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
-	tristate "UFS file system support (read only)"
-	depends on BLOCK
-	help
-	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
-	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
-	  Unixes can create and mount hard disk partitions and diskettes using
-	  this file system as well. Saying Y here will allow you to read from
-	  these partitions; if you also want to write to them, say Y to the
-	  experimental "UFS file system write support", below. Please read the
-	  file <file:Documentation/filesystems/ufs.txt> for more information.
-
-          The recently released UFS2 variant (used in FreeBSD 5.x) is
-          READ-ONLY supported.
-
-	  Note that this option is generally not needed for floppies, since a
-	  good portable way to transport files and directories between unixes
-	  (and even other operating systems) is given by the tar program ("man
-	  tar" or preferably "info tar").
-
-	  When accessing NeXTstep files, you may need to convert them from the
-	  NeXT character set to the Latin1 character set; use the program
-	  recode ("info recode") for this purpose.
-
-	  To compile the UFS file system support as a module, choose M here: the
-	  module will be called ufs.
-
-	  If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
-	bool "UFS file system write support (DANGEROUS)"
-	depends on UFS_FS && EXPERIMENTAL
-	help
-	  Say Y here if you want to try writing to UFS partitions. This is
-	  experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
-	bool "UFS debugging"
-	depends on UFS_FS
-	help
-	  If you are experiencing any problems with the UFS filesystem, say
-	  Y here.  This will result in _many_ additional debugging messages to be
-	  written to the system log.
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
 
 endif # MISC_FILESYSTEMS
 
@@ -1193,173 +241,8 @@
 
 if NETWORK_FILESYSTEMS
 
-config NFS_FS
-	tristate "NFS client support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select NFS_ACL_SUPPORT if NFS_V3_ACL
-	help
-	  Choose Y here if you want to access files residing on other
-	  computers using Sun's Network File System protocol.  To compile
-	  this file system support as a module, choose M here: the module
-	  will be called nfs.
-
-	  To mount file systems exported by NFS servers, you also need to
-	  install the user space mount.nfs command which can be found in
-	  the Linux nfs-utils package, available from http://linux-nfs.org/.
-	  Information about using the mount command is available in the
-	  mount(8) man page.  More detail about the Linux NFS client
-	  implementation is available via the nfs(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available in the kernel to mount NFS servers.  Support for NFS
-	  version 2 (RFC 1094) is always available when NFS_FS is selected.
-
-	  To configure a system which mounts its root file system via NFS
-	  at boot time, say Y here, select "Kernel level IP
-	  autoconfiguration" in the NETWORK menu, and select "Root file
-	  system on NFS" below.  You cannot compile this file system as a
-	  module in this case.
-
-	  If unsure, say N.
-
-config NFS_V3
-	bool "NFS client support for NFS version 3"
-	depends on NFS_FS
-	help
-	  This option enables support for version 3 of the NFS protocol
-	  (RFC 1813) in the kernel's NFS client.
-
-	  If unsure, say Y.
-
-config NFS_V3_ACL
-	bool "NFS client support for the NFSv3 ACL protocol extension"
-	depends on NFS_V3
-	help
-	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
-	  Sun added to Solaris but never became an official part of the
-	  NFS version 3 protocol.  This protocol extension allows
-	  applications on NFS clients to manipulate POSIX Access Control
-	  Lists on files residing on NFS servers.  NFS servers enforce
-	  ACLs on local files whether this protocol is available or not.
-
-	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
-	  protocol extension and you want your NFS client to allow
-	  applications to access and modify ACLs on files on the server.
-
-	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
-	  extension.  You can choose N here or specify the "noacl" mount
-	  option to prevent your NFS client from trying to use the NFSv3
-	  ACL protocol.
-
-	  If unsure, say N.
-
-config NFS_V4
-	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFS_FS && EXPERIMENTAL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support for version 4 of the NFS protocol
-	  (RFC 3530) in the kernel's NFS client.
-
-	  To mount NFS servers using NFSv4, you also need to install user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config ROOT_NFS
-	bool "Root file system on NFS"
-	depends on NFS_FS=y && IP_PNP
-	help
-	  If you want your system to mount its root file system via NFS,
-	  choose Y here.  This is common practice for managing systems
-	  without local permanent storage.  For details, read
-	  <file:Documentation/filesystems/nfsroot.txt>.
-
-	  Most people say N here.
-
-config NFSD
-	tristate "NFS server support"
-	depends on INET
-	select LOCKD
-	select SUNRPC
-	select EXPORTFS
-	select NFS_ACL_SUPPORT if NFSD_V2_ACL
-	help
-	  Choose Y here if you want to allow other computers to access
-	  files residing on this system using Sun's Network File System
-	  protocol.  To compile the NFS server support as a module,
-	  choose M here: the module will be called nfsd.
-
-	  You may choose to use a user-space NFS server instead, in which
-	  case you can choose N here.
-
-	  To export local file systems using NFS, you also need to install
-	  user space programs which can be found in the Linux nfs-utils
-	  package, available from http://linux-nfs.org/.  More detail about
-	  the Linux NFS server implementation is available via the
-	  exports(5) man page.
-
-	  Below you can choose which versions of the NFS protocol are
-	  available to clients mounting the NFS server on this system.
-	  Support for NFS version 2 (RFC 1094) is always available when
-	  CONFIG_NFSD is selected.
-
-	  If unsure, say N.
-
-config NFSD_V2_ACL
-	bool
-	depends on NFSD
-
-config NFSD_V3
-	bool "NFS server support for NFS version 3"
-	depends on NFSD
-	help
-	  This option enables support in your system's NFS server for
-	  version 3 of the NFS protocol (RFC 1813).
-
-	  If unsure, say Y.
-
-config NFSD_V3_ACL
-	bool "NFS server support for the NFSv3 ACL protocol extension"
-	depends on NFSD_V3
-	select NFSD_V2_ACL
-	help
-	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
-	  never became an official part of the NFS version 3 protocol.
-	  This protocol extension allows applications on NFS clients to
-	  manipulate POSIX Access Control Lists on files residing on NFS
-	  servers.  NFS servers enforce POSIX ACLs on local files whether
-	  this protocol is available or not.
-
-	  This option enables support in your system's NFS server for the
-	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
-	  POSIX ACLs on files exported by your system's NFS server.  NFS
-	  clients which support the Solaris NFSv3 ACL protocol can then
-	  access and modify ACLs on your NFS server.
-
-	  To store ACLs on your NFS server, you also need to enable ACL-
-	  related CONFIG options for your local file systems of choice.
-
-	  If unsure, say N.
-
-config NFSD_V4
-	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
-	depends on NFSD && PROC_FS && EXPERIMENTAL
-	select NFSD_V3
-	select FS_POSIX_ACL
-	select RPCSEC_GSS_KRB5
-	help
-	  This option enables support in your system's NFS server for
-	  version 4 of the NFS protocol (RFC 3530).
-
-	  To export files using NFSv4, you need to install additional user
-	  space programs which can be found in the Linux nfs-utils package,
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
 
 config LOCKD
 	tristate
@@ -1381,221 +264,13 @@
 	depends on NFSD || NFS_FS
 	default y
 
-config SUNRPC
-	tristate
-
-config SUNRPC_GSS
-	tristate
-
-config SUNRPC_XPRT_RDMA
-	tristate
-	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
-	default SUNRPC && INFINIBAND
-	help
-	  This option enables an RPC client transport capability that
-	  allows the NFS client to mount servers via an RDMA-enabled
-	  transport.
-
-	  To compile RPC client RDMA transport support as a module,
-	  choose M here: the module will be called xprtrdma.
-
-	  If unsure, say N.
-
-config SUNRPC_REGISTER_V4
-	bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	default n
-	help
-	  Sun added support for registering RPC services at an IPv6
-	  address by creating two new versions of the rpcbind protocol
-	  (RFC 1833).
-
-	  This option enables support in the kernel RPC server for
-	  registering kernel RPC services via version 4 of the rpcbind
-	  protocol.  If you enable this option, you must run a portmapper
-	  daemon that supports rpcbind protocol version 4.
-
-	  Serving NFS over IPv6 from knfsd (the kernel's NFS server)
-	  requires that you enable this option and use a portmapper that
-	  supports rpcbind version 4.
-
-	  If unsure, say N to get traditional behavior (register kernel
-	  RPC services using only rpcbind version 2).  Distributions
-	  using the legacy Linux portmapper daemon must say N here.
-
-config RPCSEC_GSS_KRB5
-	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the Kerberos version 5
-	  GSS-API mechanism (RFC 1964).
-
-	  Secure RPC calls with Kerberos require an auxiliary user-space
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.  In addition, user-space
-	  Kerberos support should be installed.
-
-	  If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
-	tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
-	depends on SUNRPC && EXPERIMENTAL
-	select SUNRPC_GSS
-	select CRYPTO
-	select CRYPTO_MD5
-	select CRYPTO_DES
-	select CRYPTO_CAST5
-	select CRYPTO_CBC
-	help
-	  Choose Y here to enable Secure RPC using the SPKM3 public key
-	  GSS-API mechansim (RFC 2025).
-
-	  Secure RPC calls with SPKM3 require an auxiliary userspace
-	  daemon which may be found in the Linux nfs-utils package
-	  available from http://linux-nfs.org/.
-
-	  If unsure, say N.
-
-config SMB_FS
-	tristate "SMB file system support (OBSOLETE, please use CIFS)"
-	depends on INET
-	select NLS
-	help
-	  SMB (Server Message Block) is the protocol Windows for Workgroups
-	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
-	  files and printers over local networks.  Saying Y here allows you to
-	  mount their file systems (often called "shares" in this context) and
-	  access them just like any other Unix directory.  Currently, this
-	  works only if the Windows machines use TCP/IP as the underlying
-	  transport protocol, and not NetBEUI.  For details, read
-	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  Note: if you just want your box to act as an SMB *server* and make
-	  files and printing services available to Windows clients (which need
-	  to have a TCP/IP stack), you don't need to say Y here; you can use
-	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
-	  for that.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile the SMB support as a module, choose M here:
-	  the module will be called smbfs.  Most people say N, however.
-
-config SMB_NLS_DEFAULT
-	bool "Use a default NLS"
-	depends on SMB_FS
-	help
-	  Enabling this will make smbfs use nls translations by default. You
-	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
-	  settings and you need to give the default nls for the SMB server as
-	  CONFIG_SMB_NLS_REMOTE.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
-	string "Default Remote NLS Option"
-	depends on SMB_NLS_DEFAULT
-	default "cp437"
-	help
-	  This setting allows you to specify a default value for which
-	  codepage the server uses. If this field is left blank no
-	  translations will be done by default. The local codepage/charset
-	  default to CONFIG_NLS_DEFAULT.
-
-	  The nls settings can be changed at mount time, if your smbmount
-	  supports that, using the codepage and iocharset parameters.
-
-	  smbmount from samba 2.2.0 or later supports this.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
 source "fs/cifs/Kconfig"
-
-config NCP_FS
-	tristate "NCP file system support (to mount NetWare volumes)"
-	depends on IPX!=n || INET
-	help
-	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
-	  used by Novell NetWare clients to talk to file servers.  It is to
-	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
-	  to mount NetWare file server volumes and to access them just like
-	  any other Unix directory.  For details, please read the file
-	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
-	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
-	  You do not have to say Y here if you want your Linux box to act as a
-	  file *server* for Novell NetWare clients.
-
-	  General information about how to connect Linux, Windows machines and
-	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
-	  To compile this as a module, choose M here: the module will be called
-	  ncpfs.  Say N unless you are connected to a Novell network.
-
 source "fs/ncpfs/Kconfig"
-
-config CODA_FS
-	tristate "Coda file system support (advanced network fs)"
-	depends on INET
-	help
-	  Coda is an advanced network file system, similar to NFS in that it
-	  enables you to mount file systems of a remote server and access them
-	  with regular Unix commands as if they were sitting on your hard
-	  disk.  Coda has several advantages over NFS: support for
-	  disconnected operation (e.g. for laptops), read/write server
-	  replication, security model for authentication and encryption,
-	  persistent client caches and write back caching.
-
-	  If you say Y here, your Linux box will be able to act as a Coda
-	  *client*.  You will need user level code as well, both for the
-	  client and server.  Servers are currently user level, i.e. they need
-	  no kernel support.  Please read
-	  <file:Documentation/filesystems/coda.txt> and check out the Coda
-	  home page <http://www.coda.cs.cmu.edu/>.
-
-	  To compile the coda client support as a module, choose M here: the
-	  module will be called coda.
-
-config AFS_FS
-	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
-	depends on INET && EXPERIMENTAL
-	select AF_RXRPC
-	help
-	  If you say Y here, you will get an experimental Andrew File System
-	  driver. It currently only supports unsecured read-only AFS access.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config AFS_DEBUG
-	bool "AFS dynamic debugging"
-	depends on AFS_FS
-	help
-	  Say Y here to make runtime controllable debugging messages appear.
-
-	  See <file:Documentation/filesystems/afs.txt> for more information.
-
-	  If unsure, say N.
-
-config 9P_FS
-	tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
-	depends on INET && NET_9P && EXPERIMENTAL
-	help
-	  If you say Y here, you will get experimental support for
-	  Plan 9 resource sharing via the 9P2000 protocol.
-
-	  See <http://v9fs.sf.net> for more information.
-
-	  If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
 
 endif # NETWORK_FILESYSTEMS
 
diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig
new file mode 100644
index 0000000..e55182a
--- /dev/null
+++ b/fs/adfs/Kconfig
@@ -0,0 +1,27 @@
+config ADFS_FS
+	tristate "ADFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Acorn Disc Filing System is the standard file system of the
+	  RiscOS operating system which runs on Acorn's ARM-based Risc PC
+	  systems and the Acorn Archimedes range of machines. If you say Y
+	  here, Linux will be able to read from ADFS partitions on hard drives
+	  and from ADFS-formatted floppy discs. If you also want to be able to
+	  write to those devices, say Y to "ADFS write support" below.
+
+	  The ADFS partition should be the first partition (i.e.,
+	  /dev/[hs]d?1) on each of your drives. Please read the file
+	  <file:Documentation/filesystems/adfs.txt> for further details.
+
+	  To compile this code as a module, choose M here: the module will be
+	  called adfs.
+
+	  If unsure, say N.
+
+config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	help
+	  If you say Y here, you will be able to write to ADFS partitions on
+	  hard drives and ADFS-formatted floppy disks. This is experimental
+	  codes, so if you're unsure, say N.
diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig
new file mode 100644
index 0000000..cfad9af
--- /dev/null
+++ b/fs/affs/Kconfig
@@ -0,0 +1,21 @@
+config AFFS_FS
+	tristate "Amiga FFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  The Fast File System (FFS) is the common file system used on hard
+	  disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20).  Say Y
+	  if you want to be able to read and write files from and to an Amiga
+	  FFS partition on your hard drive.  Amiga floppies however cannot be
+	  read with this driver due to an incompatibility of the floppy
+	  controller used in an Amiga and the standard floppy controller in
+	  PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
+	  and <file:fs/affs/Changes>.
+
+	  With this driver you can also mount disk files used by Bernd
+	  Schmidt's Un*X Amiga Emulator
+	  (<http://www.freiburg.linux.de/~uae/>).
+	  If you want to do this, you will also need to say Y or M to "Loop
+	  device support", above.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called affs.  If unsure, say N.
diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig
new file mode 100644
index 0000000..e7b522f
--- /dev/null
+++ b/fs/afs/Kconfig
@@ -0,0 +1,21 @@
+config AFS_FS
+	tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
+	depends on INET && EXPERIMENTAL
+	select AF_RXRPC
+	help
+	  If you say Y here, you will get an experimental Andrew File System
+	  driver. It currently only supports unsecured read-only AFS access.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
+
+config AFS_DEBUG
+	bool "AFS dynamic debugging"
+	depends on AFS_FS
+	help
+	  Say Y here to make runtime controllable debugging messages appear.
+
+	  See <file:Documentation/filesystems/afs.txt> for more information.
+
+	  If unsure, say N.
diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig
new file mode 100644
index 0000000..5f3bea9
--- /dev/null
+++ b/fs/autofs/Kconfig
@@ -0,0 +1,21 @@
+config AUTOFS_FS
+	tristate "Kernel automounter support"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from the autofs
+	  package; you can find the location in <file:Documentation/Changes>.
+	  You also want to answer Y to "NFS file system support", below.
+
+	  If you want to use the newer version of the automounter with more
+	  features, say N here and say Y to "Kernel automounter v4 support",
+	  below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs.
+
+	  If you are not a part of a fairly large, distributed network, you
+	  probably do not need an automounter, and can say N here.
diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig
new file mode 100644
index 0000000..1204d63
--- /dev/null
+++ b/fs/autofs4/Kconfig
@@ -0,0 +1,20 @@
+config AUTOFS4_FS
+	tristate "Kernel automounter version 4 support (also supports v3)"
+	help
+	  The automounter is a tool to automatically mount remote file systems
+	  on demand. This implementation is partially kernel-based to reduce
+	  overhead in the already-mounted case; this is unlike the BSD
+	  automounter (amd), which is a pure user space daemon.
+
+	  To use the automounter you need the user-space tools from
+	  <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
+	  want to answer Y to "NFS file system support", below.
+
+	  To compile this support as a module, choose M here: the module will be
+	  called autofs4.  You will need to add "alias autofs autofs4" to your
+	  modules configuration file.
+
+	  If you are not a part of a fairly large, distributed network or
+	  don't have a laptop which needs to dynamically reconfigure to the
+	  local network, you probably do not need an automounter, and can say
+	  N here.
diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig
new file mode 100644
index 0000000..7835d30
--- /dev/null
+++ b/fs/befs/Kconfig
@@ -0,0 +1,26 @@
+config BEFS_FS
+	tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  The BeOS File System (BeFS) is the native file system of Be, Inc's
+	  BeOS. Notable features include support for arbitrary attributes
+	  on files and directories, and database-like indices on selected
+	  attributes. (Also note that this driver doesn't make those features
+	  available at this time). It is a 64 bit filesystem, so it supports
+	  extremely large volumes and files.
+
+	  If you use this filesystem, you should also say Y to at least one
+	  of the NLS (native language support) options below.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be
+	  called befs.
+
+config BEFS_DEBUG
+	bool "Debug BeFS"
+	depends on BEFS_FS
+	help
+	  If you say Y here, you can use the 'debug' mount option to enable
+	  debugging output from the driver.
diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig
new file mode 100644
index 0000000..c2336c6
--- /dev/null
+++ b/fs/bfs/Kconfig
@@ -0,0 +1,19 @@
+config BFS_FS
+	tristate "BFS file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  Boot File System (BFS) is a file system used under SCO UnixWare to
+	  allow the bootloader access to the kernel image and other important
+	  files during the boot process.  It is usually mounted under /stand
+	  and corresponds to the slice marked as "STAND" in the UnixWare
+	  partition.  You should say Y if you want to read or write the files
+	  on your /stand slice from within Linux.  You then also need to say Y
+	  to "UnixWare slices support", below.  More information about the BFS
+	  file system is contained in the file
+	  <file:Documentation/filesystems/bfs.txt>.
+
+	  If you don't know what this is about, say N.
+
+	  To compile this as a module, choose M here: the module will be called
+	  bfs.  Note that the file system of your root partition (the one
+	  containing the directory /) cannot be compiled as a module.
diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig
new file mode 100644
index 0000000..f8fcf99
--- /dev/null
+++ b/fs/btrfs/Kconfig
@@ -0,0 +1,18 @@
+config BTRFS_FS
+	tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+	depends on EXPERIMENTAL
+	select LIBCRC32C
+	select ZLIB_INFLATE
+	select ZLIB_DEFLATE
+	help
+	  Btrfs is a new filesystem with extents, writable snapshotting,
+	  support for multiple devices and many more features.
+
+	  Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+	  FINALIZED.  You should say N here unless you are interested in
+	  testing Btrfs with non-critical data.
+
+	  To compile this file system support as a module, choose M here. The
+	  module will be called btrfs.
+
+	  If unsure, say N.
diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig
new file mode 100644
index 0000000..c0e5a7f
--- /dev/null
+++ b/fs/coda/Kconfig
@@ -0,0 +1,21 @@
+config CODA_FS
+	tristate "Coda file system support (advanced network fs)"
+	depends on INET
+	help
+	  Coda is an advanced network file system, similar to NFS in that it
+	  enables you to mount file systems of a remote server and access them
+	  with regular Unix commands as if they were sitting on your hard
+	  disk.  Coda has several advantages over NFS: support for
+	  disconnected operation (e.g. for laptops), read/write server
+	  replication, security model for authentication and encryption,
+	  persistent client caches and write back caching.
+
+	  If you say Y here, your Linux box will be able to act as a Coda
+	  *client*.  You will need user level code as well, both for the
+	  client and server.  Servers are currently user level, i.e. they need
+	  no kernel support.  Please read
+	  <file:Documentation/filesystems/coda.txt> and check out the Coda
+	  home page <http://www.coda.cs.cmu.edu/>.
+
+	  To compile the coda client support as a module, choose M here: the
+	  module will be called coda.
diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig
new file mode 100644
index 0000000..13587cc
--- /dev/null
+++ b/fs/configfs/Kconfig
@@ -0,0 +1,11 @@
+config CONFIGFS_FS
+	tristate "Userspace-driven configuration filesystem"
+	depends on SYSFS
+	help
+	  configfs is a ram-based filesystem that provides the converse
+	  of sysfs's functionality. Where sysfs is a filesystem-based
+	  view of kernel objects, configfs is a filesystem-based manager
+	  of kernel objects, or config_items.
+
+	  Both sysfs and configfs can and should exist together on the
+	  same system. One is not a replacement for the other.
diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig
new file mode 100644
index 0000000..cd06466
--- /dev/null
+++ b/fs/cramfs/Kconfig
@@ -0,0 +1,19 @@
+config CRAMFS
+	tristate "Compressed ROM file system support (cramfs)"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for CramFs (Compressed ROM File
+	  System).  CramFs is designed to be a simple, small, and compressed
+	  file system for ROM based embedded systems.  CramFs is read-only,
+	  limited to 256MB file systems (with 16MB files), and doesn't support
+	  16/32 bits uid/gid, hard links and timestamps.
+
+	  See <file:Documentation/filesystems/cramfs.txt> and
+	  <file:fs/cramfs/README> for further information.
+
+	  To compile this as a module, choose M here: the module will be called
+	  cramfs.  Note that the root file system (the one containing the
+	  directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index eba87ff..894a32d 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -168,7 +168,7 @@
 	notify = xop->callback;
 
 	if (op->info.rv) {
-		notify(flc, NULL, op->info.rv);
+		notify(fl, NULL, op->info.rv);
 		goto out;
 	}
 
@@ -187,7 +187,7 @@
 			  (unsigned long long)op->info.number, file, fl);
 	}
 
-	rv = notify(flc, NULL, 0);
+	rv = notify(fl, NULL, 0);
 	if (rv) {
 		/* XXX: We need to cancel the fs lock here: */
 		log_print("dlm_plock_callback: lock granted after lock request "
@@ -304,7 +304,9 @@
 	if (rv == -ENOENT)
 		rv = 0;
 	else if (rv > 0) {
+		locks_init_lock(fl);
 		fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK;
+		fl->fl_flags = FL_POSIX;
 		fl->fl_pid = op->info.pid;
 		fl->fl_start = op->info.start;
 		fl->fl_end = op->info.end;
diff --git a/fs/dquot.c b/fs/dquot.c
index 48c0571..bca3cac 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -87,14 +87,17 @@
 #define __DQUOT_PARANOIA
 
 /*
- * There are two quota SMP locks. dq_list_lock protects all lists with quotas
- * and quota formats and also dqstats structure containing statistics about the
- * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures
- * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
+ * There are three quota SMP locks. dq_list_lock protects all lists with quotas
+ * and quota formats, dqstats structure containing statistics about the lists
+ * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and
+ * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes.
  * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly
- * in inode_add_bytes() and inode_sub_bytes().
+ * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects
+ * modifications of quota state (on quotaon and quotaoff) and readers who care
+ * about latest values take it as well.
  *
- * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock
+ * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock,
+ *   dq_list_lock > dq_state_lock
  *
  * Note that some things (eg. sb pointer, type, id) doesn't change during
  * the life of the dquot structure and so needn't to be protected by a lock
@@ -103,12 +106,7 @@
  * operation is just reading pointers from inode (or not using them at all) the
  * read lock is enough. If pointers are altered function must hold write lock
  * (these locking rules also apply for S_NOQUOTA flag in the inode - note that
- * for altering the flag i_mutex is also needed).  If operation is holding
- * reference to dquot in other way (e.g. quotactl ops) it must be guarded by
- * dqonoff_mutex.
- * This locking assures that:
- *   a) update/access to dquot pointers in inode is serialized
- *   b) everyone is guarded against invalidate_dquots()
+ * for altering the flag i_mutex is also needed).
  *
  * Each dquot has its dq_lock mutex. Locked dquots might not be referenced
  * from inodes (dquot_alloc_space() and such don't check the dq_lock).
@@ -122,10 +120,17 @@
  * Lock ordering (including related VFS locks) is the following:
  *   i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock >
  *   dqio_mutex
+ * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem >
+ * dqptr_sem. But filesystem has to count with the fact that functions such as
+ * dquot_alloc_space() acquire dqptr_sem and they usually have to be called
+ * from inside a transaction to keep filesystem consistency after a crash. Also
+ * filesystems usually want to do some IO on dquot from ->mark_dirty which is
+ * called with dqptr_sem held.
  * i_mutex on quota files is special (it's below dqio_mutex)
  */
 
 static DEFINE_SPINLOCK(dq_list_lock);
+static DEFINE_SPINLOCK(dq_state_lock);
 DEFINE_SPINLOCK(dq_data_lock);
 
 static char *quotatypes[] = INITQFNAMES;
@@ -428,7 +433,7 @@
  * quota is disabled and pointers from inodes removed so there cannot be new
  * quota users. There can still be some users of quotas due to inodes being
  * just deleted or pruned by prune_icache() (those are not attached to any
- * list). We have to wait for such users.
+ * list) or parallel quotactl call. We have to wait for such users.
  */
 static void invalidate_dquots(struct super_block *sb, int type)
 {
@@ -600,7 +605,6 @@
 /*
  * Put reference to dquot
  * NOTE: If you change this function please check whether dqput_blocks() works right...
- * MUST be called with either dqptr_sem or dqonoff_mutex held
  */
 void dqput(struct dquot *dquot)
 {
@@ -697,36 +701,30 @@
 }
 
 /*
- * Check whether dquot is in memory.
- * MUST be called with either dqptr_sem or dqonoff_mutex held
- */
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type)
-{
-	unsigned int hashent = hashfn(sb, id, type);
-	int ret = 0;
-
-        if (!sb_has_quota_active(sb, type))
-		return 0;
-	spin_lock(&dq_list_lock);
-	if (find_dquot(hashent, sb, id, type) != NODQUOT)
-		ret = 1;
-	spin_unlock(&dq_list_lock);
-	return ret;
-}
-
-/*
  * Get reference to dquot
- * MUST be called with either dqptr_sem or dqonoff_mutex held
+ *
+ * Locking is slightly tricky here. We are guarded from parallel quotaoff()
+ * destroying our dquot by:
+ *   a) checking for quota flags under dq_list_lock and
+ *   b) getting a reference to dquot before we release dq_list_lock
  */
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type)
 {
 	unsigned int hashent = hashfn(sb, id, type);
-	struct dquot *dquot, *empty = NODQUOT;
+	struct dquot *dquot = NODQUOT, *empty = NODQUOT;
 
         if (!sb_has_quota_active(sb, type))
 		return NODQUOT;
 we_slept:
 	spin_lock(&dq_list_lock);
+	spin_lock(&dq_state_lock);
+	if (!sb_has_quota_active(sb, type)) {
+		spin_unlock(&dq_state_lock);
+		spin_unlock(&dq_list_lock);
+		goto out;
+	}
+	spin_unlock(&dq_state_lock);
+
 	if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) {
 		if (empty == NODQUOT) {
 			spin_unlock(&dq_list_lock);
@@ -735,6 +733,7 @@
 			goto we_slept;
 		}
 		dquot = empty;
+		empty = NODQUOT;
 		dquot->dq_id = id;
 		/* all dquots go on the inuse_list */
 		put_inuse(dquot);
@@ -749,8 +748,6 @@
 		dqstats.cache_hits++;
 		dqstats.lookups++;
 		spin_unlock(&dq_list_lock);
-		if (empty)
-			do_destroy_dquot(empty);
 	}
 	/* Wait for dq_lock - after this we know that either dquot_release() is already
 	 * finished or it will be canceled due to dq_count > 1 test */
@@ -758,11 +755,15 @@
 	/* Read the dquot and instantiate it (everything done only if needed) */
 	if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) {
 		dqput(dquot);
-		return NODQUOT;
+		dquot = NODQUOT;
+		goto out;
 	}
 #ifdef __DQUOT_PARANOIA
 	BUG_ON(!dquot->dq_sb);	/* Has somebody invalidated entry under us? */
 #endif
+out:
+	if (empty)
+		do_destroy_dquot(empty);
 
 	return dquot;
 }
@@ -1198,63 +1199,76 @@
 }
 /*
  *	Initialize quota pointers in inode
- *	Transaction must be started at entry
+ *	We do things in a bit complicated way but by that we avoid calling
+ *	dqget() and thus filesystem callbacks under dqptr_sem.
  */
 int dquot_initialize(struct inode *inode, int type)
 {
 	unsigned int id = 0;
 	int cnt, ret = 0;
+	struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT };
+	struct super_block *sb = inode->i_sb;
 
 	/* First test before acquiring mutex - solves deadlocks when we
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return 0;
-	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+	/* First get references to structures we might need. */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		if (type != -1 && cnt != type)
+			continue;
+		switch (cnt) {
+		case USRQUOTA:
+			id = inode->i_uid;
+			break;
+		case GRPQUOTA:
+			id = inode->i_gid;
+			break;
+		}
+		got[cnt] = dqget(sb, id, cnt);
+	}
+
+	down_write(&sb_dqopt(sb)->dqptr_sem);
 	/* Having dqptr_sem we know NOQUOTA flags can't be altered... */
 	if (IS_NOQUOTA(inode))
 		goto out_err;
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (type != -1 && cnt != type)
 			continue;
+		/* Avoid races with quotaoff() */
+		if (!sb_has_quota_active(sb, cnt))
+			continue;
 		if (inode->i_dquot[cnt] == NODQUOT) {
-			switch (cnt) {
-				case USRQUOTA:
-					id = inode->i_uid;
-					break;
-				case GRPQUOTA:
-					id = inode->i_gid;
-					break;
-			}
-			inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt);
+			inode->i_dquot[cnt] = got[cnt];
+			got[cnt] = NODQUOT;
 		}
 	}
 out_err:
-	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	up_write(&sb_dqopt(sb)->dqptr_sem);
+	/* Drop unused references */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		dqput(got[cnt]);
 	return ret;
 }
 
 /*
  * 	Release all quotas referenced by inode
- *	Transaction must be started at an entry
  */
-int dquot_drop_locked(struct inode *inode)
-{
-	int cnt;
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (inode->i_dquot[cnt] != NODQUOT) {
-			dqput(inode->i_dquot[cnt]);
-			inode->i_dquot[cnt] = NODQUOT;
-		}
-	}
-	return 0;
-}
-
 int dquot_drop(struct inode *inode)
 {
+	int cnt;
+	struct dquot *put[MAXQUOTAS];
+
 	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-	dquot_drop_locked(inode);
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
+		put[cnt] = inode->i_dquot[cnt];
+		inode->i_dquot[cnt] = NODQUOT;
+	}
 	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		dqput(put[cnt]);
 	return 0;
 }
 
@@ -1470,8 +1484,9 @@
 	qsize_t space;
 	struct dquot *transfer_from[MAXQUOTAS];
 	struct dquot *transfer_to[MAXQUOTAS];
-	int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid,
-	    chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid;
+	int cnt, ret = QUOTA_OK;
+	int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid,
+	    chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid;
 	char warntype_to[MAXQUOTAS];
 	char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS];
 
@@ -1479,21 +1494,11 @@
          * re-enter the quota code and are already holding the mutex */
 	if (IS_NOQUOTA(inode))
 		return QUOTA_OK;
-	/* Clear the arrays */
+	/* Initialize the arrays */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		transfer_to[cnt] = transfer_from[cnt] = NODQUOT;
+		transfer_from[cnt] = NODQUOT;
+		transfer_to[cnt] = NODQUOT;
 		warntype_to[cnt] = QUOTA_NL_NOWARN;
-	}
-	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-	/* Now recheck reliably when holding dqptr_sem */
-	if (IS_NOQUOTA(inode)) {	/* File without quota accounting? */
-		up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
-		return QUOTA_OK;
-	}
-	/* First build the transfer_to list - here we can block on
-	 * reading/instantiating of dquots.  We know that the transaction for
-	 * us was already started so we don't violate lock ranking here */
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		switch (cnt) {
 			case USRQUOTA:
 				if (!chuid)
@@ -1507,6 +1512,13 @@
 				break;
 		}
 	}
+
+	down_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	/* Now recheck reliably when holding dqptr_sem */
+	if (IS_NOQUOTA(inode)) {	/* File without quota accounting? */
+		up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+		goto put_all;
+	}
 	spin_lock(&dq_data_lock);
 	space = inode_get_bytes(inode);
 	/* Build the transfer_from list and check the limits */
@@ -1517,7 +1529,7 @@
 		if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) ==
 		    NO_QUOTA || check_bdq(transfer_to[cnt], space, 0,
 		    warntype_to + cnt) == NO_QUOTA)
-			goto warn_put_all;
+			goto over_quota;
 	}
 
 	/*
@@ -1545,28 +1557,37 @@
 
 		inode->i_dquot[cnt] = transfer_to[cnt];
 	}
-	ret = QUOTA_OK;
-warn_put_all:
 	spin_unlock(&dq_data_lock);
+	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+
 	/* Dirtify all the dquots - this can block when journalling */
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
 		if (transfer_from[cnt])
 			mark_dquot_dirty(transfer_from[cnt]);
-		if (transfer_to[cnt])
+		if (transfer_to[cnt]) {
 			mark_dquot_dirty(transfer_to[cnt]);
+			/* The reference we got is transferred to the inode */
+			transfer_to[cnt] = NODQUOT;
+		}
 	}
+warn_put_all:
 	flush_warnings(transfer_to, warntype_to);
 	flush_warnings(transfer_from, warntype_from_inodes);
 	flush_warnings(transfer_from, warntype_from_space);
-	
+put_all:
 	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT)
-			dqput(transfer_from[cnt]);
-		if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT)
-			dqput(transfer_to[cnt]);
+		dqput(transfer_from[cnt]);
+		dqput(transfer_to[cnt]);
 	}
-	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
 	return ret;
+over_quota:
+	spin_unlock(&dq_data_lock);
+	up_write(&sb_dqopt(inode->i_sb)->dqptr_sem);
+	/* Clear dquot pointers we don't want to dqput() */
+	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
+		transfer_from[cnt] = NODQUOT;
+	ret = NO_QUOTA;
+	goto warn_put_all;
 }
 
 /* Wrapper for transferring ownership of an inode */
@@ -1651,19 +1672,24 @@
 			continue;
 
 		if (flags & DQUOT_SUSPENDED) {
+			spin_lock(&dq_state_lock);
 			dqopt->flags |=
 				dquot_state_flag(DQUOT_SUSPENDED, cnt);
+			spin_unlock(&dq_state_lock);
 		} else {
+			spin_lock(&dq_state_lock);
 			dqopt->flags &= ~dquot_state_flag(flags, cnt);
 			/* Turning off suspended quotas? */
 			if (!sb_has_quota_loaded(sb, cnt) &&
 			    sb_has_quota_suspended(sb, cnt)) {
 				dqopt->flags &=	~dquot_state_flag(
 							DQUOT_SUSPENDED, cnt);
+				spin_unlock(&dq_state_lock);
 				iput(dqopt->files[cnt]);
 				dqopt->files[cnt] = NULL;
 				continue;
 			}
+			spin_unlock(&dq_state_lock);
 		}
 
 		/* We still have to keep quota loaded? */
@@ -1830,7 +1856,9 @@
 	}
 	mutex_unlock(&dqopt->dqio_mutex);
 	mutex_unlock(&inode->i_mutex);
+	spin_lock(&dq_state_lock);
 	dqopt->flags |= dquot_state_flag(flags, type);
+	spin_unlock(&dq_state_lock);
 
 	add_dquot_ref(sb, type);
 	mutex_unlock(&dqopt->dqonoff_mutex);
@@ -1872,9 +1900,11 @@
 	}
 	inode = dqopt->files[type];
 	dqopt->files[type] = NULL;
+	spin_lock(&dq_state_lock);
 	flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED |
 						DQUOT_LIMITS_ENABLED, type);
 	dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type);
+	spin_unlock(&dq_state_lock);
 	mutex_unlock(&dqopt->dqonoff_mutex);
 
 	flags = dquot_generic_flag(flags, type);
@@ -1952,7 +1982,9 @@
 			ret = -EBUSY;
 			goto out_lock;
 		}
+		spin_lock(&dq_state_lock);
 		sb_dqopt(sb)->flags |= dquot_state_flag(flags, type);
+		spin_unlock(&dq_state_lock);
 out_lock:
 		mutex_unlock(&dqopt->dqonoff_mutex);
 		return ret;
@@ -2039,14 +2071,12 @@
 {
 	struct dquot *dquot;
 
-	mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
-	if (!(dquot = dqget(sb, id, type))) {
-		mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+	dquot = dqget(sb, id, type);
+	if (dquot == NODQUOT)
 		return -ESRCH;
-	}
 	do_get_dqblk(dquot, di);
 	dqput(dquot);
-	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
+
 	return 0;
 }
 
@@ -2130,7 +2160,6 @@
 	struct dquot *dquot;
 	int rc;
 
-	mutex_lock(&sb_dqopt(sb)->dqonoff_mutex);
 	dquot = dqget(sb, id, type);
 	if (!dquot) {
 		rc = -ESRCH;
@@ -2139,7 +2168,6 @@
 	rc = do_set_dqblk(dquot, di);
 	dqput(dquot);
 out:
-	mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex);
 	return rc;
 }
 
@@ -2370,11 +2398,9 @@
 EXPORT_SYMBOL(dquot_mark_dquot_dirty);
 EXPORT_SYMBOL(dquot_initialize);
 EXPORT_SYMBOL(dquot_drop);
-EXPORT_SYMBOL(dquot_drop_locked);
 EXPORT_SYMBOL(vfs_dq_drop);
 EXPORT_SYMBOL(dqget);
 EXPORT_SYMBOL(dqput);
-EXPORT_SYMBOL(dquot_is_cached);
 EXPORT_SYMBOL(dquot_alloc_space);
 EXPORT_SYMBOL(dquot_alloc_inode);
 EXPORT_SYMBOL(dquot_free_space);
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
new file mode 100644
index 0000000..0c754e6
--- /dev/null
+++ b/fs/ecryptfs/Kconfig
@@ -0,0 +1,11 @@
+config ECRYPT_FS
+	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+	help
+	  Encrypted filesystem that operates on the VFS layer.  See
+	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
+	  eCryptfs.  Userspace components are required and can be
+	  obtained from <http://ecryptfs.sf.net>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ecryptfs.
diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig
new file mode 100644
index 0000000..6ebfc1c
--- /dev/null
+++ b/fs/efs/Kconfig
@@ -0,0 +1,14 @@
+config EFS_FS
+	tristate "EFS file system support (read only) (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	help
+	  EFS is an older file system used for non-ISO9660 CD-ROMs and hard
+	  disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
+	  uses the XFS file system for hard disk partitions however).
+
+	  This implementation only offers read-only access. If you don't know
+	  what all this is about, it's safe to say N. For more information
+	  about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
+
+	  To compile the EFS file system support as a module, choose M here: the
+	  module will be called efs.
diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig
new file mode 100644
index 0000000..d0a69ff
--- /dev/null
+++ b/fs/fat/Kconfig
@@ -0,0 +1,97 @@
+config FAT_FS
+	tristate
+	select NLS
+	help
+	  If you want to use one of the FAT-based file systems (the MS-DOS and
+	  VFAT (Windows 95) file systems), then you must say Y or M here
+	  to include FAT support. You will then be able to mount partitions or
+	  diskettes with FAT-based file systems and transparently access the
+	  files on them, i.e. MSDOS files will look and behave just like all
+	  other Unix files.
+
+	  This FAT support is not a file system in itself, it only provides
+	  the foundation for the other file systems. You will have to say Y or
+	  M to at least one of "MSDOS fs support" or "VFAT fs support" in
+	  order to make use of it.
+
+	  Another way to read and write MSDOS floppies and hard drive
+	  partitions from within Linux (but not transparently) is with the
+	  mtools ("man mtools") program suite. You don't need to say Y here in
+	  order to do that.
+
+	  If you need to move large files on floppies between a DOS and a
+	  Linux box, say Y here, mount the floppy under Linux with an MSDOS
+	  file system and use GNU tar's M option. GNU tar is a program
+	  available for Unix and DOS ("man tar" or "info tar").
+
+	  The FAT support will enlarge your kernel by about 37 KB. If unsure,
+	  say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  fat.  Note that if you compile the FAT support as a module, you
+	  cannot compile any of the FAT-based file systems into the kernel
+	  -- they will have to be modules as well.
+
+config MSDOS_FS
+	tristate "MSDOS fs support"
+	select FAT_FS
+	help
+	  This allows you to mount MSDOS partitions of your hard drive (unless
+	  they are compressed; to access compressed MSDOS partitions under
+	  Linux, you can either use the DOS emulator DOSEMU, described in the
+	  DOSEMU-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
+	  <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
+	  intend to use dosemu with a non-compressed MSDOS partition, say Y
+	  here) and MSDOS floppies. This means that file access becomes
+	  transparent, i.e. the MSDOS files look and behave just like all
+	  other Unix files.
+
+	  If you have Windows 95 or Windows NT installed on your MSDOS
+	  partitions, you should use the VFAT file system (say Y to "VFAT fs
+	  support" below), or you will not be able to see the long filenames
+	  generated by Windows 95 / Windows NT.
+
+	  This option will enlarge your kernel by about 7 KB. If unsure,
+	  answer Y. This will only work if you said Y to "DOS FAT fs support"
+	  as well. To compile this as a module, choose M here: the module will
+	  be called msdos.
+
+config VFAT_FS
+	tristate "VFAT (Windows-95) fs support"
+	select FAT_FS
+	help
+	  This option provides support for normal Windows file systems with
+	  long filenames.  That includes non-compressed FAT-based file systems
+	  used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
+	  programs from the mtools package.
+
+	  The VFAT support enlarges your kernel by about 10 KB and it only
+	  works if you said Y to the "DOS FAT fs support" above.  Please read
+	  the file <file:Documentation/filesystems/vfat.txt> for details.  If
+	  unsure, say Y.
+
+	  To compile this as a module, choose M here: the module will be called
+	  vfat.
+
+config FAT_DEFAULT_CODEPAGE
+	int "Default codepage for FAT"
+	depends on MSDOS_FS || VFAT_FS
+	default 437
+	help
+	  This option should be set to the codepage of your FAT filesystems.
+	  It can be overridden with the "codepage" mount option.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
+
+config FAT_DEFAULT_IOCHARSET
+	string "Default iocharset for FAT"
+	depends on VFAT_FS
+	default "iso8859-1"
+	help
+	  Set this to the default input/output character set you'd
+	  like FAT to use. It should probably match the character set
+	  that most of your FAT filesystems use, and can be overridden
+	  with the "iocharset" mount option for FAT filesystems.
+	  Note that "utf8" is not recommended for FAT filesystems.
+	  If unsure, you shouldn't set "utf8" here.
+	  See <file:Documentation/filesystems/vfat.txt> for more information.
diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig
new file mode 100644
index 0000000..8dc1cd5
--- /dev/null
+++ b/fs/freevxfs/Kconfig
@@ -0,0 +1,16 @@
+config VXFS_FS
+	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+	depends on BLOCK
+	help
+	  FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
+	  file system format.  VERITAS VxFS(TM) is the standard file system
+	  of SCO UnixWare (and possibly others) and optionally available
+	  for Sunsoft Solaris, HP-UX and many other operating systems.
+	  Currently only readonly access is supported.
+
+	  NOTE: the file system type as used by mount(1), mount(2) and
+	  fstab(5) is 'vxfs' as it describes the file system format, not
+	  the actual driver.
+
+	  To compile this as a module, choose M here: the module will be
+	  called freevxfs.  If unsure, say N.
diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig
new file mode 100644
index 0000000..0cf160a
--- /dev/null
+++ b/fs/fuse/Kconfig
@@ -0,0 +1,15 @@
+config FUSE_FS
+	tristate "FUSE (Filesystem in Userspace) support"
+	help
+	  With FUSE it is possible to implement a fully functional filesystem
+	  in a userspace program.
+
+	  There's also companion library: libfuse.  This library along with
+	  utilities is available from the FUSE homepage:
+	  <http://fuse.sourceforge.net/>
+
+	  See <file:Documentation/filesystems/fuse.txt> for more information.
+	  See <file:Documentation/Changes> for needed library/utility version.
+
+	  If you want to develop a userspace FS, or if you want to use
+	  a filesystem based on FUSE, answer Y or M.
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index e0c7ada..ba76b68 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -281,7 +281,8 @@
 			fc->blocked = 0;
 			wake_up_all(&fc->blocked_waitq);
 		}
-		if (fc->num_background == FUSE_CONGESTION_THRESHOLD) {
+		if (fc->num_background == FUSE_CONGESTION_THRESHOLD &&
+		    fc->connected) {
 			clear_bdi_congested(&fc->bdi, READ);
 			clear_bdi_congested(&fc->bdi, WRITE);
 		}
@@ -825,16 +826,21 @@
 			    struct fuse_copy_state *cs)
 {
 	struct fuse_notify_poll_wakeup_out outarg;
-	int err;
+	int err = -EINVAL;
 
 	if (size != sizeof(outarg))
-		return -EINVAL;
+		goto err;
 
 	err = fuse_copy_one(cs, &outarg, sizeof(outarg));
 	if (err)
-		return err;
+		goto err;
 
+	fuse_copy_finish(cs);
 	return fuse_notify_poll_wakeup(fc, &outarg);
+
+err:
+	fuse_copy_finish(cs);
+	return err;
 }
 
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
@@ -845,6 +851,7 @@
 		return fuse_notify_poll(fc, size, cs);
 
 	default:
+		fuse_copy_finish(cs);
 		return -EINVAL;
 	}
 }
@@ -923,7 +930,6 @@
 	 */
 	if (!oh.unique) {
 		err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs);
-		fuse_copy_finish(&cs);
 		return err ? err : nbytes;
 	}
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index e816264..d9fdb7c 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -54,7 +54,7 @@
 		ff->reserved_req = fuse_request_alloc();
 		if (!ff->reserved_req) {
 			kfree(ff);
-			ff = NULL;
+			return NULL;
 		} else {
 			INIT_LIST_HEAD(&ff->write_entry);
 			atomic_set(&ff->count, 0);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 47c96fd..459b73d 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -292,6 +292,7 @@
 	list_del(&fc->entry);
 	fuse_ctl_remove_conn(fc);
 	mutex_unlock(&fuse_mutex);
+	bdi_destroy(&fc->bdi);
 	fuse_conn_put(fc);
 }
 
@@ -532,7 +533,6 @@
 		if (fc->destroy_req)
 			fuse_request_free(fc->destroy_req);
 		mutex_destroy(&fc->inst_mutex);
-		bdi_destroy(&fc->bdi);
 		fc->release(fc);
 	}
 }
@@ -805,16 +805,18 @@
 	int err;
 	int is_bdev = sb->s_bdev != NULL;
 
+	err = -EINVAL;
 	if (sb->s_flags & MS_MANDLOCK)
-		return -EINVAL;
+		goto err;
 
 	if (!parse_fuse_opt((char *) data, &d, is_bdev))
-		return -EINVAL;
+		goto err;
 
 	if (is_bdev) {
 #ifdef CONFIG_BLOCK
+		err = -EINVAL;
 		if (!sb_set_blocksize(sb, d.blksize))
-			return -EINVAL;
+			goto err;
 #endif
 	} else {
 		sb->s_blocksize = PAGE_CACHE_SIZE;
@@ -826,20 +828,22 @@
 	sb->s_export_op = &fuse_export_operations;
 
 	file = fget(d.fd);
+	err = -EINVAL;
 	if (!file)
-		return -EINVAL;
+		goto err;
 
 	if (file->f_op != &fuse_dev_operations)
-		return -EINVAL;
+		goto err_fput;
 
 	fc = kmalloc(sizeof(*fc), GFP_KERNEL);
+	err = -ENOMEM;
 	if (!fc)
-		return -ENOMEM;
+		goto err_fput;
 
 	err = fuse_conn_init(fc, sb);
 	if (err) {
 		kfree(fc);
-		return err;
+		goto err_fput;
 	}
 
 	fc->release = fuse_free_conn;
@@ -854,12 +858,12 @@
 	err = -ENOMEM;
 	root = fuse_get_root_inode(sb, d.rootmode);
 	if (!root)
-		goto err;
+		goto err_put_conn;
 
 	root_dentry = d_alloc_root(root);
 	if (!root_dentry) {
 		iput(root);
-		goto err;
+		goto err_put_conn;
 	}
 
 	init_req = fuse_request_alloc();
@@ -903,9 +907,11 @@
 	fuse_request_free(init_req);
  err_put_root:
 	dput(root_dentry);
- err:
-	fput(file);
+ err_put_conn:
 	fuse_conn_put(fc);
+ err_fput:
+	fput(file);
+ err:
 	return err;
 }
 
diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig
new file mode 100644
index 0000000..b77c5bc
--- /dev/null
+++ b/fs/hfs/Kconfig
@@ -0,0 +1,12 @@
+config HFS_FS
+	tristate "Apple Macintosh file system support (EXPERIMENTAL)"
+	depends on BLOCK && EXPERIMENTAL
+	select NLS
+	help
+	  If you say Y here, you will be able to mount Macintosh-formatted
+	  floppy disks and hard drive partitions with full read-write access.
+	  Please read <file:Documentation/filesystems/hfs.txt> to learn about
+	  the available mount options.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hfs.
diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig
new file mode 100644
index 0000000..a633718
--- /dev/null
+++ b/fs/hfsplus/Kconfig
@@ -0,0 +1,13 @@
+config HFSPLUS_FS
+	tristate "Apple Extended HFS file system support"
+	depends on BLOCK
+	select NLS
+	select NLS_UTF8
+	help
+	  If you say Y here, you will be able to mount extended format
+	  Macintosh-formatted hard drive partitions with full read-write access.
+
+	  This file system is often called HFS+ and was introduced with
+	  MacOS 8. It includes all Mac specific filesystem data such as
+	  data forks and creator codes, but it also has several UNIX
+	  style features such as file ownership and permissions.
diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig
new file mode 100644
index 0000000..56bd15c
--- /dev/null
+++ b/fs/hpfs/Kconfig
@@ -0,0 +1,14 @@
+config HPFS_FS
+	tristate "OS/2 HPFS file system support"
+	depends on BLOCK
+	help
+	  OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
+	  is the file system used for organizing files on OS/2 hard disk
+	  partitions. Say Y if you want to be able to read files from and
+	  write files to an OS/2 HPFS partition on your hard drive. OS/2
+	  floppies however are in regular MSDOS format, so you don't need this
+	  option in order to be able to read them. Read
+	  <file:Documentation/filesystems/hpfs.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called hpfs.  If unsure, say N.
diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig
new file mode 100644
index 0000000..8ab9878
--- /dev/null
+++ b/fs/isofs/Kconfig
@@ -0,0 +1,39 @@
+config ISO9660_FS
+	tristate "ISO 9660 CDROM file system support"
+	help
+	  This is the standard file system used on CD-ROMs.  It was previously
+	  known as "High Sierra File System" and is called "hsfs" on other
+	  Unix systems.  The so-called Rock-Ridge extensions which allow for
+	  long Unix filenames and symbolic links are also supported by this
+	  driver.  If you have a CD-ROM drive and want to do more with it than
+	  just listen to audio CDs and watch its LEDs, say Y (and read
+	  <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>), thereby
+	  enlarging your kernel by about 27 KB; otherwise say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called isofs.
+
+config JOLIET
+	bool "Microsoft Joliet CDROM extensions"
+	depends on ISO9660_FS
+	select NLS
+	help
+	  Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
+	  which allows for long filenames in unicode format (unicode is the
+	  new 16 bit character code, successor to ASCII, which encodes the
+	  characters of almost all languages of the world; see
+	  <http://www.unicode.org/> for more information).  Say Y here if you
+	  want to be able to read Joliet CD-ROMs under Linux.
+
+config ZISOFS
+	bool "Transparent decompression extension"
+	depends on ISO9660_FS
+	select ZLIB_INFLATE
+	help
+	  This is a Linux-specific extension to RockRidge which lets you store
+	  data in compressed form on a CD-ROM and have it transparently
+	  decompressed when the CD-ROM is accessed.  See
+	  <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
+	  necessary to create such a filesystem.  Say Y here if you want to be
+	  able to read such compressed CD-ROMs.
diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig
new file mode 100644
index 0000000..9ff619a
--- /dev/null
+++ b/fs/jfs/Kconfig
@@ -0,0 +1,49 @@
+config JFS_FS
+	tristate "JFS filesystem support"
+	select NLS
+	help
+	  This is a port of IBM's Journaled Filesystem .  More information is
+	  available in the file <file:Documentation/filesystems/jfs.txt>.
+
+	  If you do not intend to use the JFS filesystem, say N.
+
+config JFS_POSIX_ACL
+	bool "JFS POSIX Access Control Lists"
+	depends on JFS_FS
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config JFS_SECURITY
+	bool "JFS Security Labels"
+	depends on JFS_FS
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the jfs filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
+
+config JFS_DEBUG
+	bool "JFS debugging"
+	depends on JFS_FS
+	help
+	  If you are experiencing any problems with the JFS filesystem, say
+	  Y here.  This will result in additional debugging messages to be
+	  written to the system log.  Under normal circumstances, this
+	  results in very little overhead.
+
+config JFS_STATISTICS
+	bool "JFS statistics"
+	depends on JFS_FS
+	help
+	  Enabling this option will cause statistics from the JFS file system
+	  to be made available to the user in the /proc/fs/jfs/ directory.
diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig
new file mode 100644
index 0000000..0fd7ca9
--- /dev/null
+++ b/fs/minix/Kconfig
@@ -0,0 +1,17 @@
+config MINIX_FS
+	tristate "Minix file system support"
+	depends on BLOCK
+	help
+	  Minix is a simple operating system used in many classes about OS's.
+	  The minix file system (method to organize files on a hard disk
+	  partition or a floppy disk) was the original file system for Linux,
+	  but has been superseded by the second extended file system ext2fs.
+	  You don't want to use the minix file system on your hard disk
+	  because of certain built-in restrictions, but it is sometimes found
+	  on older Linux floppy disks.  This option will enlarge your kernel
+	  by about 28 KB. If unsure, say N.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called minix.  Note that the file system of your root
+	  partition (the one containing the directory /) cannot be compiled as
+	  a module.
diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig
index 1428084..c931cf2 100644
--- a/fs/ncpfs/Kconfig
+++ b/fs/ncpfs/Kconfig
@@ -1,6 +1,27 @@
 #
 # NCP Filesystem configuration
 #
+config NCP_FS
+	tristate "NCP file system support (to mount NetWare volumes)"
+	depends on IPX!=n || INET
+	help
+	  NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
+	  used by Novell NetWare clients to talk to file servers.  It is to
+	  IPX what NFS is to TCP/IP, if that helps.  Saying Y here allows you
+	  to mount NetWare file server volumes and to access them just like
+	  any other Unix directory.  For details, please read the file
+	  <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
+	  the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
+
+	  You do not have to say Y here if you want your Linux box to act as a
+	  file *server* for Novell NetWare clients.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile this as a module, choose M here: the module will be called
+	  ncpfs.  Say N unless you are connected to a Novell network.
+
 config NCPFS_PACKET_SIGNING
 	bool "Packet signatures"
 	depends on NCP_FS
diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
new file mode 100644
index 0000000..36fe20d
--- /dev/null
+++ b/fs/nfs/Kconfig
@@ -0,0 +1,86 @@
+config NFS_FS
+	tristate "NFS client support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select NFS_ACL_SUPPORT if NFS_V3_ACL
+	help
+	  Choose Y here if you want to access files residing on other
+	  computers using Sun's Network File System protocol.  To compile
+	  this file system support as a module, choose M here: the module
+	  will be called nfs.
+
+	  To mount file systems exported by NFS servers, you also need to
+	  install the user space mount.nfs command which can be found in
+	  the Linux nfs-utils package, available from http://linux-nfs.org/.
+	  Information about using the mount command is available in the
+	  mount(8) man page.  More detail about the Linux NFS client
+	  implementation is available via the nfs(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available in the kernel to mount NFS servers.  Support for NFS
+	  version 2 (RFC 1094) is always available when NFS_FS is selected.
+
+	  To configure a system which mounts its root file system via NFS
+	  at boot time, say Y here, select "Kernel level IP
+	  autoconfiguration" in the NETWORK menu, and select "Root file
+	  system on NFS" below.  You cannot compile this file system as a
+	  module in this case.
+
+	  If unsure, say N.
+
+config NFS_V3
+	bool "NFS client support for NFS version 3"
+	depends on NFS_FS
+	help
+	  This option enables support for version 3 of the NFS protocol
+	  (RFC 1813) in the kernel's NFS client.
+
+	  If unsure, say Y.
+
+config NFS_V3_ACL
+	bool "NFS client support for the NFSv3 ACL protocol extension"
+	depends on NFS_V3
+	help
+	  Some NFS servers support an auxiliary NFSv3 ACL protocol that
+	  Sun added to Solaris but never became an official part of the
+	  NFS version 3 protocol.  This protocol extension allows
+	  applications on NFS clients to manipulate POSIX Access Control
+	  Lists on files residing on NFS servers.  NFS servers enforce
+	  ACLs on local files whether this protocol is available or not.
+
+	  Choose Y here if your NFS server supports the Solaris NFSv3 ACL
+	  protocol extension and you want your NFS client to allow
+	  applications to access and modify ACLs on files on the server.
+
+	  Most NFS servers don't support the Solaris NFSv3 ACL protocol
+	  extension.  You can choose N here or specify the "noacl" mount
+	  option to prevent your NFS client from trying to use the NFSv3
+	  ACL protocol.
+
+	  If unsure, say N.
+
+config NFS_V4
+	bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFS_FS && EXPERIMENTAL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support for version 4 of the NFS protocol
+	  (RFC 3530) in the kernel's NFS client.
+
+	  To mount NFS servers using NFSv4, you also need to install user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
+
+config ROOT_NFS
+	bool "Root file system on NFS"
+	depends on NFS_FS=y && IP_PNP
+	help
+	  If you want your system to mount its root file system via NFS,
+	  choose Y here.  This is common practice for managing systems
+	  without local permanent storage.  For details, read
+	  <file:Documentation/filesystems/nfsroot.txt>.
+
+	  Most people say N here.
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
new file mode 100644
index 0000000..44d7d04
--- /dev/null
+++ b/fs/nfsd/Kconfig
@@ -0,0 +1,80 @@
+config NFSD
+	tristate "NFS server support"
+	depends on INET
+	select LOCKD
+	select SUNRPC
+	select EXPORTFS
+	select NFS_ACL_SUPPORT if NFSD_V2_ACL
+	help
+	  Choose Y here if you want to allow other computers to access
+	  files residing on this system using Sun's Network File System
+	  protocol.  To compile the NFS server support as a module,
+	  choose M here: the module will be called nfsd.
+
+	  You may choose to use a user-space NFS server instead, in which
+	  case you can choose N here.
+
+	  To export local file systems using NFS, you also need to install
+	  user space programs which can be found in the Linux nfs-utils
+	  package, available from http://linux-nfs.org/.  More detail about
+	  the Linux NFS server implementation is available via the
+	  exports(5) man page.
+
+	  Below you can choose which versions of the NFS protocol are
+	  available to clients mounting the NFS server on this system.
+	  Support for NFS version 2 (RFC 1094) is always available when
+	  CONFIG_NFSD is selected.
+
+	  If unsure, say N.
+
+config NFSD_V2_ACL
+	bool
+	depends on NFSD
+
+config NFSD_V3
+	bool "NFS server support for NFS version 3"
+	depends on NFSD
+	help
+	  This option enables support in your system's NFS server for
+	  version 3 of the NFS protocol (RFC 1813).
+
+	  If unsure, say Y.
+
+config NFSD_V3_ACL
+	bool "NFS server support for the NFSv3 ACL protocol extension"
+	depends on NFSD_V3
+	select NFSD_V2_ACL
+	help
+	  Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
+	  never became an official part of the NFS version 3 protocol.
+	  This protocol extension allows applications on NFS clients to
+	  manipulate POSIX Access Control Lists on files residing on NFS
+	  servers.  NFS servers enforce POSIX ACLs on local files whether
+	  this protocol is available or not.
+
+	  This option enables support in your system's NFS server for the
+	  NFSv3 ACL protocol extension allowing NFS clients to manipulate
+	  POSIX ACLs on files exported by your system's NFS server.  NFS
+	  clients which support the Solaris NFSv3 ACL protocol can then
+	  access and modify ACLs on your NFS server.
+
+	  To store ACLs on your NFS server, you also need to enable ACL-
+	  related CONFIG options for your local file systems of choice.
+
+	  If unsure, say N.
+
+config NFSD_V4
+	bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
+	depends on NFSD && PROC_FS && EXPERIMENTAL
+	select NFSD_V3
+	select FS_POSIX_ACL
+	select RPCSEC_GSS_KRB5
+	help
+	  This option enables support in your system's NFS server for
+	  version 4 of the NFS protocol (RFC 3530).
+
+	  To export files using NFSv4, you need to install additional user
+	  space programs which can be found in the Linux nfs-utils package,
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c
index c903e04..5573508 100644
--- a/fs/nfsd/auth.c
+++ b/fs/nfsd/auth.c
@@ -49,6 +49,8 @@
 		new->fsuid = exp->ex_anon_uid;
 		new->fsgid = exp->ex_anon_gid;
 		gi = groups_alloc(0);
+		if (!gi)
+			goto oom;
 	} else if (flags & NFSEXP_ROOTSQUASH) {
 		if (!new->fsuid)
 			new->fsuid = exp->ex_anon_uid;
@@ -85,6 +87,7 @@
 		new->cap_effective = cap_raise_nfsd_set(new->cap_effective,
 							new->cap_permitted);
 	put_cred(override_creds(new));
+	put_cred(new);
 	return 0;
 
 oom:
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 88db7d3..b6f60f4 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -2871,7 +2871,6 @@
 		file_lock.fl_owner = (fl_owner_t)lockt->lt_stateowner;
 	file_lock.fl_pid = current->tgid;
 	file_lock.fl_flags = FL_POSIX;
-	file_lock.fl_lmops = &nfsd_posix_mng_ops;
 
 	file_lock.fl_start = lockt->lt_offset;
 	file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index d53a183..bed766e 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -427,10 +427,61 @@
 	return ret;
 }
 
+/*
+ * Get an inotify_kernel_event if one exists and is small
+ * enough to fit in "count". Return an error pointer if
+ * not large enough.
+ *
+ * Called with the device ev_mutex held.
+ */
+static struct inotify_kernel_event *get_one_event(struct inotify_device *dev,
+						  size_t count)
+{
+	size_t event_size = sizeof(struct inotify_event);
+	struct inotify_kernel_event *kevent;
+
+	if (list_empty(&dev->events))
+		return NULL;
+
+	kevent = inotify_dev_get_event(dev);
+	if (kevent->name)
+		event_size += kevent->event.len;
+
+	if (event_size > count)
+		return ERR_PTR(-EINVAL);
+
+	remove_kevent(dev, kevent);
+	return kevent;
+}
+
+/*
+ * Copy an event to user space, returning how much we copied.
+ *
+ * We already checked that the event size is smaller than the
+ * buffer we had in "get_one_event()" above.
+ */
+static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent,
+				  char __user *buf)
+{
+	size_t event_size = sizeof(struct inotify_event);
+
+	if (copy_to_user(buf, &kevent->event, event_size))
+		return -EFAULT;
+
+	if (kevent->name) {
+		buf += event_size;
+
+		if (copy_to_user(buf, kevent->name, kevent->event.len))
+			return -EFAULT;
+
+		event_size += kevent->event.len;
+	}
+	return event_size;
+}
+
 static ssize_t inotify_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *pos)
 {
-	size_t event_size = sizeof (struct inotify_event);
 	struct inotify_device *dev;
 	char __user *start;
 	int ret;
@@ -440,81 +491,43 @@
 	dev = file->private_data;
 
 	while (1) {
+		struct inotify_kernel_event *kevent;
 
 		prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE);
 
 		mutex_lock(&dev->ev_mutex);
-		if (!list_empty(&dev->events)) {
-			ret = 0;
-			break;
-		}
+		kevent = get_one_event(dev, count);
 		mutex_unlock(&dev->ev_mutex);
 
-		if (file->f_flags & O_NONBLOCK) {
-			ret = -EAGAIN;
-			break;
+		if (kevent) {
+			ret = PTR_ERR(kevent);
+			if (IS_ERR(kevent))
+				break;
+			ret = copy_event_to_user(kevent, buf);
+			free_kevent(kevent);
+			if (ret < 0)
+				break;
+			buf += ret;
+			count -= ret;
+			continue;
 		}
 
-		if (signal_pending(current)) {
-			ret = -EINTR;
+		ret = -EAGAIN;
+		if (file->f_flags & O_NONBLOCK)
 			break;
-		}
+		ret = -EINTR;
+		if (signal_pending(current))
+			break;
+
+		if (start != buf)
+			break;
 
 		schedule();
 	}
 
 	finish_wait(&dev->wq, &wait);
-	if (ret)
-		return ret;
-
-	while (1) {
-		struct inotify_kernel_event *kevent;
-
+	if (start != buf && ret != -EFAULT)
 		ret = buf - start;
-		if (list_empty(&dev->events))
-			break;
-
-		kevent = inotify_dev_get_event(dev);
-		if (event_size + kevent->event.len > count) {
-			if (ret == 0 && count > 0) {
-				/*
-				 * could not get a single event because we
-				 * didn't have enough buffer space.
-				 */
-				ret = -EINVAL;
-			}
-			break;
-		}
-		remove_kevent(dev, kevent);
-
-		/*
-		 * Must perform the copy_to_user outside the mutex in order
-		 * to avoid a lock order reversal with mmap_sem.
-		 */
-		mutex_unlock(&dev->ev_mutex);
-
-		if (copy_to_user(buf, &kevent->event, event_size)) {
-			ret = -EFAULT;
-			break;
-		}
-		buf += event_size;
-		count -= event_size;
-
-		if (kevent->name) {
-			if (copy_to_user(buf, kevent->name, kevent->event.len)){
-				ret = -EFAULT;
-				break;
-			}
-			buf += kevent->event.len;
-			count -= kevent->event.len;
-		}
-
-		free_kevent(kevent);
-
-		mutex_lock(&dev->ev_mutex);
-	}
-	mutex_unlock(&dev->ev_mutex);
-
 	return ret;
 }
 
diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig
new file mode 100644
index 0000000..f5a868c
--- /dev/null
+++ b/fs/ntfs/Kconfig
@@ -0,0 +1,78 @@
+config NTFS_FS
+	tristate "NTFS file system support"
+	select NLS
+	help
+	  NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
+
+	  Saying Y or M here enables read support.  There is partial, but
+	  safe, write support available.  For write support you must also
+	  say Y to "NTFS write support" below.
+
+	  There are also a number of user-space tools available, called
+	  ntfsprogs.  These include ntfsundelete and ntfsresize, that work
+	  without NTFS support enabled in the kernel.
+
+	  This is a rewrite from scratch of Linux NTFS support and replaced
+	  the old NTFS code starting with Linux 2.5.11.  A backport to
+	  the Linux 2.4 kernel series is separately available as a patch
+	  from the project web site.
+
+	  For more information see <file:Documentation/filesystems/ntfs.txt>
+	  and <http://www.linux-ntfs.org/>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called ntfs.
+
+	  If you are not using Windows NT, 2000, XP or 2003 in addition to
+	  Linux on your computer it is safe to say N.
+
+config NTFS_DEBUG
+	bool "NTFS debugging support"
+	depends on NTFS_FS
+	help
+	  If you are experiencing any problems with the NTFS file system, say
+	  Y here.  This will result in additional consistency checks to be
+	  performed by the driver as well as additional debugging messages to
+	  be written to the system log.  Note that debugging messages are
+	  disabled by default.  To enable them, supply the option debug_msgs=1
+	  at the kernel command line when booting the kernel or as an option
+	  to insmod when loading the ntfs module.  Once the driver is active,
+	  you can enable debugging messages by doing (as root):
+	  echo 1 > /proc/sys/fs/ntfs-debug
+	  Replacing the "1" with "0" would disable debug messages.
+
+	  If you leave debugging messages disabled, this results in little
+	  overhead, but enabling debug messages results in very significant
+	  slowdown of the system.
+
+	  When reporting bugs, please try to have available a full dump of
+	  debugging messages while the misbehaviour was occurring.
+
+config NTFS_RW
+	bool "NTFS write support"
+	depends on NTFS_FS
+	help
+	  This enables the partial, but safe, write support in the NTFS driver.
+
+	  The only supported operation is overwriting existing files, without
+	  changing the file length.  No file or directory creation, deletion or
+	  renaming is possible.  Note only non-resident files can be written to
+	  so you may find that some very small files (<500 bytes or so) cannot
+	  be written to.
+
+	  While we cannot guarantee that it will not damage any data, we have
+	  so far not received a single report where the driver would have
+	  damaged someones data so we assume it is perfectly safe to use.
+
+	  Note:  While write support is safe in this version (a rewrite from
+	  scratch of the NTFS support), it should be noted that the old NTFS
+	  write support, included in Linux 2.5.10 and before (since 1997),
+	  is not safe.
+
+	  This is currently useful with TopologiLinux.  TopologiLinux is run
+	  on top of any DOS/Microsoft Windows system without partitioning your
+	  hard disk.  Unlike other Linux distributions TopologiLinux does not
+	  need its own partition.  For more information see
+	  <http://topologi-linux.sourceforge.net/>
+
+	  It is perfectly safe to say N here.
diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig
new file mode 100644
index 0000000..701b7a3
--- /dev/null
+++ b/fs/ocfs2/Kconfig
@@ -0,0 +1,85 @@
+config OCFS2_FS
+	tristate "OCFS2 file system support"
+	depends on NET && SYSFS
+	select CONFIGFS_FS
+	select JBD2
+	select CRC32
+	select QUOTA
+	select QUOTA_TREE
+	help
+	  OCFS2 is a general purpose extent based shared disk cluster file
+	  system with many similarities to ext3. It supports 64 bit inode
+	  numbers, and has automatically extending metadata groups which may
+	  also make it attractive for non-clustered use.
+
+	  You'll want to install the ocfs2-tools package in order to at least
+	  get "mount.ocfs2".
+
+	  Project web page:    http://oss.oracle.com/projects/ocfs2
+	  Tools web page:      http://oss.oracle.com/projects/ocfs2-tools
+	  OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
+
+	  For more information on OCFS2, see the file
+	  <file:Documentation/filesystems/ocfs2.txt>.
+
+config OCFS2_FS_O2CB
+	tristate "O2CB Kernelspace Clustering"
+	depends on OCFS2_FS
+	default y
+	help
+	  OCFS2 includes a simple kernelspace clustering package, the OCFS2
+	  Cluster Base.  It only requires a very small userspace component
+	  to configure it. This comes with the standard ocfs2-tools package.
+	  O2CB is limited to maintaining a cluster for OCFS2 file systems.
+	  It cannot manage any other cluster applications.
+
+	  It is always safe to say Y here, as the clustering method is
+	  run-time selectable.
+
+config OCFS2_FS_USERSPACE_CLUSTER
+	tristate "OCFS2 Userspace Clustering"
+	depends on OCFS2_FS && DLM
+	default y
+	help
+	  This option will allow OCFS2 to use userspace clustering services
+	  in conjunction with the DLM in fs/dlm.  If you are using a
+	  userspace cluster manager, say Y here.
+
+	  It is safe to say Y, as the clustering method is run-time
+	  selectable.
+
+config OCFS2_FS_STATS
+	bool "OCFS2 statistics"
+	depends on OCFS2_FS
+	default y
+	help
+	  This option allows some fs statistics to be captured. Enabling
+	  this option may increase the memory consumption.
+
+config OCFS2_DEBUG_MASKLOG
+	bool "OCFS2 logging support"
+	depends on OCFS2_FS
+	default y
+	help
+	  The ocfs2 filesystem has an extensive logging system.  The system
+	  allows selection of events to log via files in /sys/o2cb/logmask/.
+	  This option will enlarge your kernel, but it allows debugging of
+	  ocfs2 filesystem issues.
+
+config OCFS2_DEBUG_FS
+	bool "OCFS2 expensive checks"
+	depends on OCFS2_FS
+	default n
+	help
+	  This option will enable expensive consistency checks. Enable
+	  this option for debugging only as it is likely to decrease
+	  performance of the filesystem.
+
+config OCFS2_FS_POSIX_ACL
+	bool "OCFS2 POSIX Access Control Lists"
+	depends on OCFS2_FS
+	select FS_POSIX_ACL
+	default n
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index 6aff8f2..f4efa89 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -810,171 +810,6 @@
 	return status;
 }
 
-/* This is difficult. We have to lock quota inode and start transaction
- * in this function but we don't want to take the penalty of exlusive
- * quota file lock when we are just going to use cached structures. So
- * we just take read lock check whether we have dquot cached and if so,
- * we don't have to take the write lock... */
-static int ocfs2_dquot_initialize(struct inode *inode, int type)
-{
-	handle_t *handle = NULL;
-	int status = 0;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-	int exclusive = 0;
-	int cnt;
-	qid_t id;
-
-	mlog_entry_void();
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (type != -1 && cnt != type)
-			continue;
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 0);
-		if (status < 0)
-			goto out;
-		/* This is just a performance optimization not a reliable test.
-		 * Since we hold an inode lock, noone can actually release
-		 * the structure until we are finished with initialization. */
-		if (inode->i_dquot[cnt] != NODQUOT) {
-			ocfs2_unlock_global_qf(oinfo, 0);
-			continue;
-		}
-		/* When we have inode lock, we know that no dquot_release() can
-		 * run and thus we can safely check whether we need to
-		 * read+modify global file to get quota information or whether
-		 * our node already has it. */
-		if (cnt == USRQUOTA)
-			id = inode->i_uid;
-		else if (cnt == GRPQUOTA)
-			id = inode->i_gid;
-		else
-			BUG();
-		/* Obtain exclusion from quota off... */
-		down_write(&sb_dqopt(sb)->dqptr_sem);
-		exclusive = !dquot_is_cached(sb, id, cnt);
-		up_write(&sb_dqopt(sb)->dqptr_sem);
-		if (exclusive) {
-			status = ocfs2_lock_global_qf(oinfo, 1);
-			if (status < 0) {
-				exclusive = 0;
-				mlog_errno(status);
-				goto out_ilock;
-			}
-			handle = ocfs2_start_trans(OCFS2_SB(sb),
-					ocfs2_calc_qinit_credits(sb, cnt));
-			if (IS_ERR(handle)) {
-				status = PTR_ERR(handle);
-				mlog_errno(status);
-				goto out_ilock;
-			}
-		}
-		dquot_initialize(inode, cnt);
-		if (exclusive) {
-			ocfs2_commit_trans(OCFS2_SB(sb), handle);
-			ocfs2_unlock_global_qf(oinfo, 1);
-		}
-		ocfs2_unlock_global_qf(oinfo, 0);
-	}
-	mlog_exit(0);
-	return 0;
-out_ilock:
-	if (exclusive)
-		ocfs2_unlock_global_qf(oinfo, 1);
-	ocfs2_unlock_global_qf(oinfo, 0);
-out:
-	mlog_exit(status);
-	return status;
-}
-
-static int ocfs2_dquot_drop_slow(struct inode *inode)
-{
-	int status = 0;
-	int cnt;
-	int got_lock[MAXQUOTAS] = {0, 0};
-	handle_t *handle;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 1);
-		if (status < 0)
-			goto out;
-		got_lock[cnt] = 1;
-	}
-	handle = ocfs2_start_trans(OCFS2_SB(sb),
-			ocfs2_calc_qinit_credits(sb, USRQUOTA) +
-			ocfs2_calc_qinit_credits(sb, GRPQUOTA));
-	if (IS_ERR(handle)) {
-		status = PTR_ERR(handle);
-		mlog_errno(status);
-		goto out;
-	}
-	dquot_drop(inode);
-	ocfs2_commit_trans(OCFS2_SB(sb), handle);
-out:
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-		if (got_lock[cnt]) {
-			oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-			ocfs2_unlock_global_qf(oinfo, 1);
-		}
-	return status;
-}
-
-/* See the comment before ocfs2_dquot_initialize. */
-static int ocfs2_dquot_drop(struct inode *inode)
-{
-	int status = 0;
-	struct super_block *sb = inode->i_sb;
-	struct ocfs2_mem_dqinfo *oinfo;
-	int exclusive = 0;
-	int cnt;
-	int got_lock[MAXQUOTAS] = {0, 0};
-
-	mlog_entry_void();
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (!sb_has_quota_active(sb, cnt))
-			continue;
-		oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-		status = ocfs2_lock_global_qf(oinfo, 0);
-		if (status < 0)
-			goto out;
-		got_lock[cnt] = 1;
-	}
-	/* Lock against anyone releasing references so that when when we check
-	 * we know we are not going to be last ones to release dquot */
-	down_write(&sb_dqopt(sb)->dqptr_sem);
-	/* Urgh, this is a terrible hack :( */
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
-		if (inode->i_dquot[cnt] != NODQUOT &&
-		    atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) {
-			exclusive = 1;
-			break;
-		}
-	}
-	if (!exclusive)
-		dquot_drop_locked(inode);
-	up_write(&sb_dqopt(sb)->dqptr_sem);
-out:
-	for (cnt = 0; cnt < MAXQUOTAS; cnt++)
-		if (got_lock[cnt]) {
-			oinfo = sb_dqinfo(sb, cnt)->dqi_priv;
-			ocfs2_unlock_global_qf(oinfo, 0);
-		}
-	/* In case we bailed out because we had to do expensive locking
-	 * do it now... */
-	if (exclusive)
-		status = ocfs2_dquot_drop_slow(inode);
-	mlog_exit(status);
-	return status;
-}
-
 static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type)
 {
 	struct ocfs2_dquot *dquot =
@@ -991,8 +826,8 @@
 }
 
 struct dquot_operations ocfs2_quota_operations = {
-	.initialize	= ocfs2_dquot_initialize,
-	.drop		= ocfs2_dquot_drop,
+	.initialize	= dquot_initialize,
+	.drop		= dquot_drop,
 	.alloc_space	= dquot_alloc_space,
 	.alloc_inode	= dquot_alloc_inode,
 	.free_space	= dquot_free_space,
diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig
new file mode 100644
index 0000000..b1b9a0a
--- /dev/null
+++ b/fs/omfs/Kconfig
@@ -0,0 +1,13 @@
+config OMFS_FS
+	tristate "SonicBlue Optimized MPEG File System support"
+	depends on BLOCK
+	select CRC_ITU_T
+	help
+	  This is the proprietary file system used by the Rio Karma music
+	  player and ReplayTV DVR.  Despite the name, this filesystem is not
+	  more efficient than a standard FS for MPEG files, in fact likely
+	  the opposite is true.  Say Y if you have either of these devices
+	  and wish to mount its disk.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called omfs.  If unsure, say N.
diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig
new file mode 100644
index 0000000..be8e0e1
--- /dev/null
+++ b/fs/qnx4/Kconfig
@@ -0,0 +1,25 @@
+config QNX4FS_FS
+	tristate "QNX4 file system support (read only)"
+	depends on BLOCK
+	help
+	  This is the file system used by the real-time operating systems
+	  QNX 4 and QNX 6 (the latter is also called QNX RTP).
+	  Further information is available at <http://www.qnx.com/>.
+	  Say Y if you intend to mount QNX hard disks or floppies.
+	  Unless you say Y to "QNX4FS read-write support" below, you will
+	  only be able to read these file systems.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called qnx4.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
+
+config QNX4FS_RW
+	bool "QNX4FS write support (DANGEROUS)"
+	depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
+	help
+	  Say Y if you want to test write support for QNX4 file systems.
+
+	  It's currently broken, so for now:
+	  answer N.
diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig
new file mode 100644
index 0000000..949b8c6
--- /dev/null
+++ b/fs/reiserfs/Kconfig
@@ -0,0 +1,85 @@
+config REISERFS_FS
+	tristate "Reiserfs support"
+	help
+	  Stores not just filenames but the files themselves in a balanced
+	  tree.  Uses journalling.
+
+	  Balanced trees are more efficient than traditional file system
+	  architectural foundations.
+
+	  In general, ReiserFS is as fast as ext2, but is very efficient with
+	  large directories and small files.  Additional patches are needed
+	  for NFS and quotas, please see <http://www.namesys.com/> for links.
+
+	  It is more easily extended to have features currently found in
+	  database and keyword search systems than block allocation based file
+	  systems are.  The next version will be so extended, and will support
+	  plugins consistent with our motto ``It takes more than a license to
+	  make source code open.''
+
+	  Read <http://www.namesys.com/> to learn more about reiserfs.
+
+	  Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
+
+	  If you like it, you can pay us to add new features to it that you
+	  need, buy a support contract, or pay us to port it to another OS.
+
+config REISERFS_CHECK
+	bool "Enable reiserfs debug mode"
+	depends on REISERFS_FS
+	help
+	  If you set this to Y, then ReiserFS will perform every check it can
+	  possibly imagine of its internal consistency throughout its
+	  operation.  It will also go substantially slower.  More than once we
+	  have forgotten that this was on, and then gone despondent over the
+	  latest benchmarks.:-) Use of this option allows our team to go all
+	  out in checking for consistency when debugging without fear of its
+	  effect on end users.  If you are on the verge of sending in a bug
+	  report, say Y and you might get a useful error message.  Almost
+	  everyone should say N.
+
+config REISERFS_PROC_INFO
+	bool "Stats in /proc/fs/reiserfs"
+	depends on REISERFS_FS && PROC_FS
+	help
+	  Create under /proc/fs/reiserfs a hierarchy of files, displaying
+	  various ReiserFS statistics and internal data at the expense of
+	  making your kernel or module slightly larger (+8 KB). This also
+	  increases the amount of kernel memory required for each mount.
+	  Almost everyone but ReiserFS developers and people fine-tuning
+	  reiserfs or tracing problems should say N.
+
+config REISERFS_FS_XATTR
+	bool "ReiserFS extended attributes"
+	depends on REISERFS_FS
+	help
+	  Extended attributes are name:value pairs associated with inodes by
+	  the kernel or by users (see the attr(5) manual page, or visit
+	  <http://acl.bestbits.at/> for details).
+
+	  If unsure, say N.
+
+config REISERFS_FS_POSIX_ACL
+	bool "ReiserFS POSIX Access Control Lists"
+	depends on REISERFS_FS_XATTR
+	select FS_POSIX_ACL
+	help
+	  Posix Access Control Lists (ACLs) support permissions for users and
+	  groups beyond the owner/group/world scheme.
+
+	  To learn more about Access Control Lists, visit the Posix ACLs for
+	  Linux website <http://acl.bestbits.at/>.
+
+	  If you don't know what Access Control Lists are, say N
+
+config REISERFS_FS_SECURITY
+	bool "ReiserFS Security Labels"
+	depends on REISERFS_FS_XATTR
+	help
+	  Security labels support alternative access control models
+	  implemented by security modules like SELinux.  This option
+	  enables an extended attribute handler for file security
+	  labels in the ReiserFS filesystem.
+
+	  If you are not using a security module that requires using
+	  extended attributes for file security labels, say N.
diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig
new file mode 100644
index 0000000..1a17020
--- /dev/null
+++ b/fs/romfs/Kconfig
@@ -0,0 +1,16 @@
+config ROMFS_FS
+	tristate "ROM file system support"
+	depends on BLOCK
+	---help---
+	  This is a very small read-only file system mainly intended for
+	  initial ram disks of installation disks, but it could be used for
+	  other read-only media as well.  Read
+	  <file:Documentation/filesystems/romfs.txt> for details.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called romfs.  Note that the file system of your
+	  root partition (the one containing the directory /) cannot be a
+	  module.
+
+	  If you don't know whether you need it, then you don't need it:
+	  answer N.
diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig
new file mode 100644
index 0000000..e668127
--- /dev/null
+++ b/fs/smbfs/Kconfig
@@ -0,0 +1,55 @@
+config SMB_FS
+	tristate "SMB file system support (OBSOLETE, please use CIFS)"
+	depends on INET
+	select NLS
+	help
+	  SMB (Server Message Block) is the protocol Windows for Workgroups
+	  (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
+	  files and printers over local networks.  Saying Y here allows you to
+	  mount their file systems (often called "shares" in this context) and
+	  access them just like any other Unix directory.  Currently, this
+	  works only if the Windows machines use TCP/IP as the underlying
+	  transport protocol, and not NetBEUI.  For details, read
+	  <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  Note: if you just want your box to act as an SMB *server* and make
+	  files and printing services available to Windows clients (which need
+	  to have a TCP/IP stack), you don't need to say Y here; you can use
+	  the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
+	  for that.
+
+	  General information about how to connect Linux, Windows machines and
+	  Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
+
+	  To compile the SMB support as a module, choose M here:
+	  the module will be called smbfs.  Most people say N, however.
+
+config SMB_NLS_DEFAULT
+	bool "Use a default NLS"
+	depends on SMB_FS
+	help
+	  Enabling this will make smbfs use nls translations by default. You
+	  need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
+	  settings and you need to give the default nls for the SMB server as
+	  CONFIG_SMB_NLS_REMOTE.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
+
+config SMB_NLS_REMOTE
+	string "Default Remote NLS Option"
+	depends on SMB_NLS_DEFAULT
+	default "cp437"
+	help
+	  This setting allows you to specify a default value for which
+	  codepage the server uses. If this field is left blank no
+	  translations will be done by default. The local codepage/charset
+	  default to CONFIG_NLS_DEFAULT.
+
+	  The nls settings can be changed at mount time, if your smbmount
+	  supports that, using the codepage and iocharset parameters.
+
+	  smbmount from samba 2.2.0 or later supports this.
diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig
new file mode 100644
index 0000000..25a00d1
--- /dev/null
+++ b/fs/squashfs/Kconfig
@@ -0,0 +1,51 @@
+config SQUASHFS
+	tristate "SquashFS 4.0 - Squashed file system support"
+	depends on BLOCK
+	select ZLIB_INFLATE
+	help
+	  Saying Y here includes support for SquashFS 4.0 (a Compressed
+	  Read-Only File System).  Squashfs is a highly compressed read-only
+	  filesystem for Linux.  It uses zlib compression to compress both
+	  files, inodes and directories.  Inodes in the system are very small
+	  and all blocks are packed to minimise data overhead. Block sizes
+	  greater than 4K are supported up to a maximum of 1 Mbytes (default
+	  block size 128K).  SquashFS 4.0 supports 64 bit filesystems and files
+	  (larger than 4GB), full uid/gid information, hard links and
+	  timestamps.  
+
+	  Squashfs is intended for general read-only filesystem use, for
+	  archival use (i.e. in cases where a .tar.gz file may be used), and in
+	  embedded systems where low overhead is needed.  Further information
+	  and tools are available from http://squashfs.sourceforge.net.
+
+	  If you want to compile this as a module ( = code which can be
+	  inserted in and removed from the running kernel whenever you want),
+	  say M here and read <file:Documentation/modules.txt>.  The module
+	  will be called squashfs.  Note that the root file system (the one
+	  containing the directory /) cannot be compiled as a module.
+
+	  If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+	bool "Additional option for memory-constrained systems" 
+	depends on SQUASHFS
+	default n
+	help
+	  Saying Y here allows you to specify cache size.
+
+	  If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+	int "Number of fragments cached" if SQUASHFS_EMBEDDED
+	depends on SQUASHFS
+	default "3"
+	help
+	  By default SquashFS caches the last 3 fragments read from
+	  the filesystem.  Increasing this amount may mean SquashFS
+	  has to re-read fragments less often from disk, at the expense
+	  of extra system memory.  Decreasing this amount will mean
+	  SquashFS uses less memory at the expense of extra reads from disk.
+
+	  Note there must be at least one cached fragment.  Anything
+	  much more than three will probably not make much difference.
diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig
new file mode 100644
index 0000000..f4b6758
--- /dev/null
+++ b/fs/sysfs/Kconfig
@@ -0,0 +1,23 @@
+config SYSFS
+	bool "sysfs file system support" if EMBEDDED
+	default y
+	help
+	The sysfs filesystem is a virtual filesystem that the kernel uses to
+	export internal kernel objects, their attributes, and their
+	relationships to one another.
+
+	Users can use sysfs to ascertain useful information about the running
+	kernel, such as the devices the kernel has discovered on each bus and
+	which driver each is bound to. sysfs can also be used to tune devices
+	and other kernel subsystems.
+
+	Some system agents rely on the information in sysfs to operate.
+	/sbin/hotplug uses device and object attributes in sysfs to assist in
+	delegating policy decisions, like persistently naming devices.
+
+	sysfs is currently used by the block subsystem to mount the root
+	partition.  If sysfs is disabled you must specify the boot device on
+	the kernel boot command line via its major and minor numbers.  For
+	example, "root=03:01" for /dev/hda1.
+
+	Designers of embedded systems may wish to say N here to conserve space.
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 66f6e58..f2c478c 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -63,6 +63,9 @@
 	int count = min_t(size_t, bytes, PAGE_SIZE);
 	char *temp;
 
+	if (!bytes)
+		return 0;
+
 	if (size) {
 		if (offs > size)
 			return 0;
@@ -131,6 +134,9 @@
 	int count = min_t(size_t, bytes, PAGE_SIZE);
 	char *temp;
 
+	if (!bytes)
+		return 0;
+
 	if (size) {
 		if (offs > size)
 			return 0;
diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig
new file mode 100644
index 0000000..33aeb4b
--- /dev/null
+++ b/fs/sysv/Kconfig
@@ -0,0 +1,36 @@
+config SYSV_FS
+	tristate "System V/Xenix/V7/Coherent file system support"
+	depends on BLOCK
+	help
+	  SCO, Xenix and Coherent are commercial Unix systems for Intel
+	  machines, and Version 7 was used on the DEC PDP-11. Saying Y
+	  here would allow you to read from their floppies and hard disk
+	  partitions.
+
+	  If you have floppies or hard disk partitions like that, it is likely
+	  that they contain binaries from those other Unix systems; in order
+	  to run these binaries, you will want to install linux-abi which is
+	  a set of kernel modules that lets you run SCO, Xenix, Wyse,
+	  UnixWare, Dell Unix and System V programs under Linux.  It is
+	  available via FTP (user: ftp) from
+	  <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
+	  NOTE: that will work only for binaries from Intel-based systems;
+	  PDP ones will have to wait until somebody ports Linux to -11 ;-)
+
+	  If you only intend to mount files from some other Unix over the
+	  network using NFS, you don't need the System V file system support
+	  (but you need NFS file system support obviously).
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").  Note also that this option has
+	  nothing whatsoever to do with the option "System V IPC". Read about
+	  the System V file system in
+	  <file:Documentation/filesystems/sysv-fs.txt>.
+	  Saying Y here will enlarge your kernel by about 27 KB.
+
+	  To compile this as a module, choose M here: the module will be called
+	  sysv.
+
+	  If you haven't heard about all of this before, it's safe to say N.
diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig
new file mode 100644
index 0000000..0e0e99b
--- /dev/null
+++ b/fs/udf/Kconfig
@@ -0,0 +1,18 @@
+config UDF_FS
+	tristate "UDF file system support"
+	select CRC_ITU_T
+	help
+	  This is the new file system used on some CD-ROMs and DVDs. Say Y if
+	  you intend to mount DVD discs or CDRW's written in packet mode, or
+	  if written to by other UDF utilities, such as DirectCD.
+	  Please read <file:Documentation/filesystems/udf.txt>.
+
+	  To compile this file system support as a module, choose M here: the
+	  module will be called udf.
+
+	  If unsure, say N.
+
+config UDF_NLS
+	bool
+	default y
+	depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig
new file mode 100644
index 0000000..e4f10a4
--- /dev/null
+++ b/fs/ufs/Kconfig
@@ -0,0 +1,43 @@
+config UFS_FS
+	tristate "UFS file system support (read only)"
+	depends on BLOCK
+	help
+	  BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
+	  OpenBSD and NeXTstep) use a file system called UFS. Some System V
+	  Unixes can create and mount hard disk partitions and diskettes using
+	  this file system as well. Saying Y here will allow you to read from
+	  these partitions; if you also want to write to them, say Y to the
+	  experimental "UFS file system write support", below. Please read the
+	  file <file:Documentation/filesystems/ufs.txt> for more information.
+
+          The recently released UFS2 variant (used in FreeBSD 5.x) is
+          READ-ONLY supported.
+
+	  Note that this option is generally not needed for floppies, since a
+	  good portable way to transport files and directories between unixes
+	  (and even other operating systems) is given by the tar program ("man
+	  tar" or preferably "info tar").
+
+	  When accessing NeXTstep files, you may need to convert them from the
+	  NeXT character set to the Latin1 character set; use the program
+	  recode ("info recode") for this purpose.
+
+	  To compile the UFS file system support as a module, choose M here: the
+	  module will be called ufs.
+
+	  If you haven't heard about all of this before, it's safe to say N.
+
+config UFS_FS_WRITE
+	bool "UFS file system write support (DANGEROUS)"
+	depends on UFS_FS && EXPERIMENTAL
+	help
+	  Say Y here if you want to try writing to UFS partitions. This is
+	  experimental, so you should back up your UFS partitions beforehand.
+
+config UFS_DEBUG
+	bool "UFS debugging"
+	depends on UFS_FS
+	help
+	  If you are experiencing any problems with the UFS filesystem, say
+	  Y here.  This will result in _many_ additional debugging messages to be
+	  written to the system log.
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 3f53dd1..29228f5 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -1,6 +1,7 @@
 config XFS_FS
 	tristate "XFS filesystem support"
 	depends on BLOCK
+	select EXPORTFS
 	help
 	  XFS is a high performance journaling filesystem which originated
 	  on the SGI IRIX platform.  It is completely multi-threaded, can
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index e5be1e0..4bd1123 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -50,12 +50,14 @@
 #include "xfs_vnodeops.h"
 #include "xfs_quota.h"
 #include "xfs_inode_item.h"
+#include "xfs_export.h"
 
 #include <linux/capability.h>
 #include <linux/dcache.h>
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/pagemap.h>
+#include <linux/exportfs.h>
 
 /*
  * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to
@@ -164,97 +166,69 @@
 	return 0;
 }
 
-
 /*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
+ * No need to do permission checks on the various pathname components
+ * as the handle operations are privileged.
  */
 STATIC int
-xfs_vget_fsop_handlereq(
-	xfs_mount_t		*mp,
-	struct inode		*parinode,	/* parent inode pointer    */
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		**inode)
+xfs_handle_acceptable(
+	void			*context,
+	struct dentry		*dentry)
 {
-	void			__user *hanp;
-	size_t			hlen;
-	xfs_fid_t		*xfid;
-	xfs_handle_t		*handlep;
+	return 1;
+}
+
+/*
+ * Convert userspace handle data into a dentry.
+ */
+struct dentry *
+xfs_handle_to_dentry(
+	struct file		*parfilp,
+	void __user		*uhandle,
+	u32			hlen)
+{
 	xfs_handle_t		handle;
-	xfs_inode_t		*ip;
-	xfs_ino_t		ino;
-	__u32			igen;
-	int			error;
+	struct xfs_fid64	fid;
 
 	/*
 	 * Only allow handle opens under a directory.
 	 */
-	if (!S_ISDIR(parinode->i_mode))
-		return XFS_ERROR(ENOTDIR);
+	if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode))
+		return ERR_PTR(-ENOTDIR);
 
-	hanp = hreq->ihandle;
-	hlen = hreq->ihandlen;
-	handlep = &handle;
+	if (hlen != sizeof(xfs_handle_t))
+		return ERR_PTR(-EINVAL);
+	if (copy_from_user(&handle, uhandle, hlen))
+		return ERR_PTR(-EFAULT);
+	if (handle.ha_fid.fid_len !=
+	    sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len))
+		return ERR_PTR(-EINVAL);
 
-	if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-		return XFS_ERROR(EINVAL);
-	if (copy_from_user(handlep, hanp, hlen))
-		return XFS_ERROR(EFAULT);
-	if (hlen < sizeof(*handlep))
-		memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-	if (hlen > sizeof(handlep->ha_fsid)) {
-		if (handlep->ha_fid.fid_len !=
-		    (hlen - sizeof(handlep->ha_fsid) -
-		            sizeof(handlep->ha_fid.fid_len)) ||
-		    handlep->ha_fid.fid_pad)
-			return XFS_ERROR(EINVAL);
-	}
+	memset(&fid, 0, sizeof(struct fid));
+	fid.ino = handle.ha_fid.fid_ino;
+	fid.gen = handle.ha_fid.fid_gen;
 
-	/*
-	 * Crack the handle, obtain the inode # & generation #
-	 */
-	xfid = (struct xfs_fid *)&handlep->ha_fid;
-	if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-		ino  = xfid->fid_ino;
-		igen = xfid->fid_gen;
-	} else {
-		return XFS_ERROR(EINVAL);
-	}
+	return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3,
+			FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG,
+			xfs_handle_acceptable, NULL);
+}
 
-	/*
-	 * Get the XFS inode, building a Linux inode to go with it.
-	 */
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
-		return error;
-	if (ip == NULL)
-		return XFS_ERROR(EIO);
-	if (ip->i_d.di_gen != igen) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
-		return XFS_ERROR(ENOENT);
-	}
-
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	*inode = VFS_I(ip);
-	return 0;
+STATIC struct dentry *
+xfs_handlereq_to_dentry(
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq)
+{
+	return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen);
 }
 
 int
 xfs_open_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
 	struct file		*parfilp,
-	struct inode		*parinode)
+	xfs_fsop_handlereq_t	*hreq)
 {
 	const struct cred	*cred = current_cred();
 	int			error;
-	int			new_fd;
+	int			fd;
 	int			permflag;
 	struct file		*filp;
 	struct inode		*inode;
@@ -263,19 +237,21 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -XFS_ERROR(EPERM);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
+	inode = dentry->d_inode;
 
 	/* Restrict xfs_open_by_handle to directories & regular files. */
 	if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) {
-		iput(inode);
-		return -XFS_ERROR(EINVAL);
+		error = -XFS_ERROR(EPERM);
+		goto out_dput;
 	}
 
 #if BITS_PER_LONG != 32
 	hreq->oflags |= O_LARGEFILE;
 #endif
+
 	/* Put open permission in namei format. */
 	permflag = hreq->oflags;
 	if ((permflag+1) & O_ACCMODE)
@@ -285,50 +261,45 @@
 
 	if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) &&
 	    (permflag & FMODE_WRITE) && IS_APPEND(inode)) {
-		iput(inode);
-		return -XFS_ERROR(EPERM);
+		error = -XFS_ERROR(EPERM);
+		goto out_dput;
 	}
 
 	if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) {
-		iput(inode);
-		return -XFS_ERROR(EACCES);
+		error = -XFS_ERROR(EACCES);
+		goto out_dput;
 	}
 
 	/* Can't write directories. */
-	if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
-		iput(inode);
-		return -XFS_ERROR(EISDIR);
+	if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) {
+		error = -XFS_ERROR(EISDIR);
+		goto out_dput;
 	}
 
-	if ((new_fd = get_unused_fd()) < 0) {
-		iput(inode);
-		return new_fd;
+	fd = get_unused_fd();
+	if (fd < 0) {
+		error = fd;
+		goto out_dput;
 	}
 
-	dentry = d_obtain_alias(inode);
-	if (IS_ERR(dentry)) {
-		put_unused_fd(new_fd);
-		return PTR_ERR(dentry);
-	}
-
-	/* Ensure umount returns EBUSY on umounts while this file is open. */
-	mntget(parfilp->f_path.mnt);
-
-	/* Create file pointer. */
-	filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred);
+	filp = dentry_open(dentry, mntget(parfilp->f_path.mnt),
+			   hreq->oflags, cred);
 	if (IS_ERR(filp)) {
-		put_unused_fd(new_fd);
-		return -XFS_ERROR(-PTR_ERR(filp));
+		put_unused_fd(fd);
+		return PTR_ERR(filp);
 	}
 
 	if (inode->i_mode & S_IFREG) {
-		/* invisible operation should not change atime */
 		filp->f_flags |= O_NOATIME;
 		filp->f_mode |= FMODE_NOCMTIME;
 	}
 
-	fd_install(new_fd, filp);
-	return new_fd;
+	fd_install(fd, filp);
+	return fd;
+
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 /*
@@ -359,11 +330,10 @@
 
 int
 xfs_readlink_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq)
 {
-	struct inode		*inode;
+	struct dentry		*dentry;
 	__u32			olen;
 	void			*link;
 	int			error;
@@ -371,26 +341,28 @@
 	if (!capable(CAP_SYS_ADMIN))
 		return -XFS_ERROR(EPERM);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	/* Restrict this handle operation to symlinks only. */
-	if (!S_ISLNK(inode->i_mode)) {
+	if (!S_ISLNK(dentry->d_inode->i_mode)) {
 		error = -XFS_ERROR(EINVAL);
-		goto out_iput;
+		goto out_dput;
 	}
 
 	if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) {
 		error = -XFS_ERROR(EFAULT);
-		goto out_iput;
+		goto out_dput;
 	}
 
 	link = kmalloc(MAXPATHLEN+1, GFP_KERNEL);
-	if (!link)
-		goto out_iput;
+	if (!link) {
+		error = -XFS_ERROR(ENOMEM);
+		goto out_dput;
+	}
 
-	error = -xfs_readlink(XFS_I(inode), link);
+	error = -xfs_readlink(XFS_I(dentry->d_inode), link);
 	if (error)
 		goto out_kfree;
 	error = do_readlink(hreq->ohandle, olen, link);
@@ -399,32 +371,31 @@
 
  out_kfree:
 	kfree(link);
- out_iput:
-	iput(inode);
+ out_dput:
+	dput(dentry);
 	return error;
 }
 
 STATIC int
 xfs_fssetdm_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	struct fsdmidata	fsd;
 	xfs_fsop_setdm_handlereq_t dmhreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 
 	if (!capable(CAP_MKNOD))
 		return -XFS_ERROR(EPERM);
 	if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode);
-	if (error)
-		return -error;
+	dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+	if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
 		error = -XFS_ERROR(EPERM);
 		goto out;
 	}
@@ -434,24 +405,23 @@
 		goto out;
 	}
 
-	error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+	error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
 				 fsd.fsd_dmstate);
 
  out:
-	iput(inode);
+	dput(dentry);
 	return error;
 }
 
 STATIC int
 xfs_attrlist_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
-	int			error;
+	int			error = -ENOMEM;
 	attrlist_cursor_kern_t	*cursor;
 	xfs_fsop_attrlist_handlereq_t al_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	char			*kbuf;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -467,16 +437,16 @@
 	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
 		return -XFS_ERROR(EINVAL);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode);
-	if (error)
-		goto out;
+	dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
-		goto out_vn_rele;
+		goto out_dput;
 
 	cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-	error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+	error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
 					al_hreq.flags, cursor);
 	if (error)
 		goto out_kfree;
@@ -486,10 +456,9 @@
 
  out_kfree:
 	kfree(kbuf);
- out_vn_rele:
-	iput(inode);
- out:
-	return -error;
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 int
@@ -564,15 +533,13 @@
 
 STATIC int
 xfs_attrmulti_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
 	struct file		*parfilp,
-	struct inode		*parinode)
+	void			__user *arg)
 {
 	int			error;
 	xfs_attr_multiop_t	*ops;
 	xfs_fsop_attrmulti_handlereq_t am_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	unsigned int		i, size;
 	char			*attr_name;
 
@@ -581,19 +548,19 @@
 	if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode);
-	if (error)
-		goto out;
+	dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	error = E2BIG;
 	size = am_hreq.opcount * sizeof(xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = ENOMEM;
 	ops = kmalloc(size, GFP_KERNEL);
 	if (!ops)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = EFAULT;
 	if (copy_from_user(ops, am_hreq.ops, size))
@@ -615,25 +582,28 @@
 
 		switch (ops[i].am_opcode) {
 		case ATTR_OP_GET:
-			ops[i].am_error = xfs_attrmulti_attr_get(inode,
-					attr_name, ops[i].am_attrvalue,
-					&ops[i].am_length, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_get(
+					dentry->d_inode, attr_name,
+					ops[i].am_attrvalue, &ops[i].am_length,
+					ops[i].am_flags);
 			break;
 		case ATTR_OP_SET:
 			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
 			if (ops[i].am_error)
 				break;
-			ops[i].am_error = xfs_attrmulti_attr_set(inode,
-					attr_name, ops[i].am_attrvalue,
-					ops[i].am_length, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_set(
+					dentry->d_inode, attr_name,
+					ops[i].am_attrvalue, ops[i].am_length,
+					ops[i].am_flags);
 			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		case ATTR_OP_REMOVE:
 			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
 			if (ops[i].am_error)
 				break;
-			ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-					attr_name, ops[i].am_flags);
+			ops[i].am_error = xfs_attrmulti_attr_remove(
+					dentry->d_inode, attr_name,
+					ops[i].am_flags);
 			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		default:
@@ -647,9 +617,8 @@
 	kfree(attr_name);
  out_kfree_ops:
 	kfree(ops);
- out_vn_rele:
-	iput(inode);
- out:
+ out_dput:
+	dput(dentry);
 	return -error;
 }
 
@@ -1440,23 +1409,23 @@
 
 		if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
 			return -XFS_ERROR(EFAULT);
-		return xfs_open_by_handle(mp, &hreq, filp, inode);
+		return xfs_open_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_FSSETDM_BY_HANDLE:
-		return xfs_fssetdm_by_handle(mp, arg, inode);
+		return xfs_fssetdm_by_handle(filp, arg);
 
 	case XFS_IOC_READLINK_BY_HANDLE: {
 		xfs_fsop_handlereq_t	hreq;
 
 		if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t)))
 			return -XFS_ERROR(EFAULT);
-		return xfs_readlink_by_handle(mp, &hreq, inode);
+		return xfs_readlink_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_ATTRLIST_BY_HANDLE:
-		return xfs_attrlist_by_handle(mp, arg, inode);
+		return xfs_attrlist_by_handle(filp, arg);
 
 	case XFS_IOC_ATTRMULTI_BY_HANDLE:
-		return xfs_attrmulti_by_handle(mp, arg, filp, inode);
+		return xfs_attrmulti_by_handle(filp, arg);
 
 	case XFS_IOC_SWAPEXT: {
 		struct xfs_swapext	sxp;
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h
index 8c16bf2..7bd7c6a 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.h
+++ b/fs/xfs/linux-2.6/xfs_ioctl.h
@@ -34,16 +34,13 @@
 
 extern int
 xfs_open_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
 	struct file		*parfilp,
-	struct inode		*parinode);
+	xfs_fsop_handlereq_t	*hreq);
 
 extern int
 xfs_readlink_by_handle(
-	xfs_mount_t		*mp,
-	xfs_fsop_handlereq_t	*hreq,
-	struct inode		*parinode);
+	struct file		*parfilp,
+	xfs_fsop_handlereq_t	*hreq);
 
 extern int
 xfs_attrmulti_attr_get(
@@ -67,6 +64,12 @@
 	char			*name,
 	__uint32_t		flags);
 
+extern struct dentry *
+xfs_handle_to_dentry(
+	struct file		*parfilp,
+	void __user		*uhandle,
+	u32			hlen);
+
 extern long
 xfs_file_ioctl(
 	struct file		*filp,
diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c
index 50903ad..c70c4e3 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl32.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl32.c
@@ -17,6 +17,7 @@
  */
 #include <linux/compat.h>
 #include <linux/ioctl.h>
+#include <linux/mount.h>
 #include <asm/uaccess.h>
 #include "xfs.h"
 #include "xfs_fs.h"
@@ -340,96 +341,24 @@
 	return 0;
 }
 
-/*
- * Convert userspace handle data into inode.
- *
- * We use the fact that all the fsop_handlereq ioctl calls have a data
- * structure argument whose first component is always a xfs_fsop_handlereq_t,
- * so we can pass that sub structure into this handy, shared routine.
- *
- * If no error, caller must always iput the returned inode.
- */
-STATIC int
-xfs_vget_fsop_handlereq_compat(
-	xfs_mount_t		*mp,
-	struct inode		*parinode,	/* parent inode pointer    */
-	compat_xfs_fsop_handlereq_t	*hreq,
-	struct inode		**inode)
+STATIC struct dentry *
+xfs_compat_handlereq_to_dentry(
+	struct file		*parfilp,
+	compat_xfs_fsop_handlereq_t *hreq)
 {
-	void			__user *hanp;
-	size_t			hlen;
-	xfs_fid_t		*xfid;
-	xfs_handle_t		*handlep;
-	xfs_handle_t		handle;
-	xfs_inode_t		*ip;
-	xfs_ino_t		ino;
-	__u32			igen;
-	int			error;
-
-	/*
-	 * Only allow handle opens under a directory.
-	 */
-	if (!S_ISDIR(parinode->i_mode))
-		return XFS_ERROR(ENOTDIR);
-
-	hanp = compat_ptr(hreq->ihandle);
-	hlen = hreq->ihandlen;
-	handlep = &handle;
-
-	if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep))
-		return XFS_ERROR(EINVAL);
-	if (copy_from_user(handlep, hanp, hlen))
-		return XFS_ERROR(EFAULT);
-	if (hlen < sizeof(*handlep))
-		memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen);
-	if (hlen > sizeof(handlep->ha_fsid)) {
-		if (handlep->ha_fid.fid_len !=
-		    (hlen - sizeof(handlep->ha_fsid) -
-			    sizeof(handlep->ha_fid.fid_len)) ||
-		    handlep->ha_fid.fid_pad)
-			return XFS_ERROR(EINVAL);
-	}
-
-	/*
-	 * Crack the handle, obtain the inode # & generation #
-	 */
-	xfid = (struct xfs_fid *)&handlep->ha_fid;
-	if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) {
-		ino  = xfid->fid_ino;
-		igen = xfid->fid_gen;
-	} else {
-		return XFS_ERROR(EINVAL);
-	}
-
-	/*
-	 * Get the XFS inode, building a Linux inode to go with it.
-	 */
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
-		return error;
-	if (ip == NULL)
-		return XFS_ERROR(EIO);
-	if (ip->i_d.di_gen != igen) {
-		xfs_iput_new(ip, XFS_ILOCK_SHARED);
-		return XFS_ERROR(ENOENT);
-	}
-
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
-
-	*inode = VFS_I(ip);
-	return 0;
+	return xfs_handle_to_dentry(parfilp,
+			compat_ptr(hreq->ihandle), hreq->ihandlen);
 }
 
 STATIC int
 xfs_compat_attrlist_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	attrlist_cursor_kern_t	*cursor;
 	compat_xfs_fsop_attrlist_handlereq_t al_hreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 	char			*kbuf;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -446,17 +375,17 @@
 	if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE))
 		return -XFS_ERROR(EINVAL);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq,
-					       &inode);
-	if (error)
-		goto out;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
+	error = -ENOMEM;
 	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
-		goto out_vn_rele;
+		goto out_dput;
 
 	cursor = (attrlist_cursor_kern_t *)&al_hreq.pos;
-	error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen,
+	error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen,
 					al_hreq.flags, cursor);
 	if (error)
 		goto out_kfree;
@@ -466,22 +395,20 @@
 
  out_kfree:
 	kfree(kbuf);
- out_vn_rele:
-	iput(inode);
- out:
-	return -error;
+ out_dput:
+	dput(dentry);
+	return error;
 }
 
 STATIC int
 xfs_compat_attrmulti_by_handle(
-	xfs_mount_t				*mp,
-	void					__user *arg,
-	struct inode				*parinode)
+	struct file				*parfilp,
+	void					__user *arg)
 {
 	int					error;
 	compat_xfs_attr_multiop_t		*ops;
 	compat_xfs_fsop_attrmulti_handlereq_t	am_hreq;
-	struct inode				*inode;
+	struct dentry				*dentry;
 	unsigned int				i, size;
 	char					*attr_name;
 
@@ -491,20 +418,19 @@
 			   sizeof(compat_xfs_fsop_attrmulti_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq,
-					       &inode);
-	if (error)
-		goto out;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
 	error = E2BIG;
 	size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t);
 	if (!size || size > 16 * PAGE_SIZE)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = ENOMEM;
 	ops = kmalloc(size, GFP_KERNEL);
 	if (!ops)
-		goto out_vn_rele;
+		goto out_dput;
 
 	error = EFAULT;
 	if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
@@ -527,20 +453,29 @@
 
 		switch (ops[i].am_opcode) {
 		case ATTR_OP_GET:
-			ops[i].am_error = xfs_attrmulti_attr_get(inode,
-					attr_name,
+			ops[i].am_error = xfs_attrmulti_attr_get(
+					dentry->d_inode, attr_name,
 					compat_ptr(ops[i].am_attrvalue),
 					&ops[i].am_length, ops[i].am_flags);
 			break;
 		case ATTR_OP_SET:
-			ops[i].am_error = xfs_attrmulti_attr_set(inode,
-					attr_name,
+			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+			if (ops[i].am_error)
+				break;
+			ops[i].am_error = xfs_attrmulti_attr_set(
+					dentry->d_inode, attr_name,
 					compat_ptr(ops[i].am_attrvalue),
 					ops[i].am_length, ops[i].am_flags);
+			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		case ATTR_OP_REMOVE:
-			ops[i].am_error = xfs_attrmulti_attr_remove(inode,
-					attr_name, ops[i].am_flags);
+			ops[i].am_error = mnt_want_write(parfilp->f_path.mnt);
+			if (ops[i].am_error)
+				break;
+			ops[i].am_error = xfs_attrmulti_attr_remove(
+					dentry->d_inode, attr_name,
+					ops[i].am_flags);
+			mnt_drop_write(parfilp->f_path.mnt);
 			break;
 		default:
 			ops[i].am_error = EINVAL;
@@ -553,22 +488,20 @@
 	kfree(attr_name);
  out_kfree_ops:
 	kfree(ops);
- out_vn_rele:
-	iput(inode);
- out:
+ out_dput:
+	dput(dentry);
 	return -error;
 }
 
 STATIC int
 xfs_compat_fssetdm_by_handle(
-	xfs_mount_t		*mp,
-	void			__user *arg,
-	struct inode		*parinode)
+	struct file		*parfilp,
+	void			__user *arg)
 {
 	int			error;
 	struct fsdmidata	fsd;
 	compat_xfs_fsop_setdm_handlereq_t dmhreq;
-	struct inode		*inode;
+	struct dentry		*dentry;
 
 	if (!capable(CAP_MKNOD))
 		return -XFS_ERROR(EPERM);
@@ -576,12 +509,11 @@
 			   sizeof(compat_xfs_fsop_setdm_handlereq_t)))
 		return -XFS_ERROR(EFAULT);
 
-	error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq,
-					       &inode);
-	if (error)
-		return -error;
+	dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq);
+	if (IS_ERR(dentry))
+		return PTR_ERR(dentry);
 
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) {
+	if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) {
 		error = -XFS_ERROR(EPERM);
 		goto out;
 	}
@@ -591,11 +523,11 @@
 		goto out;
 	}
 
-	error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask,
+	error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask,
 				 fsd.fsd_dmstate);
 
 out:
-	iput(inode);
+	dput(dentry);
 	return error;
 }
 
@@ -722,21 +654,21 @@
 
 		if (xfs_compat_handlereq_copyin(&hreq, arg))
 			return -XFS_ERROR(EFAULT);
-		return xfs_open_by_handle(mp, &hreq, filp, inode);
+		return xfs_open_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_READLINK_BY_HANDLE_32: {
 		struct xfs_fsop_handlereq	hreq;
 
 		if (xfs_compat_handlereq_copyin(&hreq, arg))
 			return -XFS_ERROR(EFAULT);
-		return xfs_readlink_by_handle(mp, &hreq, inode);
+		return xfs_readlink_by_handle(filp, &hreq);
 	}
 	case XFS_IOC_ATTRLIST_BY_HANDLE_32:
-		return xfs_compat_attrlist_by_handle(mp, arg, inode);
+		return xfs_compat_attrlist_by_handle(filp, arg);
 	case XFS_IOC_ATTRMULTI_BY_HANDLE_32:
-		return xfs_compat_attrmulti_by_handle(mp, arg, inode);
+		return xfs_compat_attrmulti_by_handle(filp, arg);
 	case XFS_IOC_FSSETDM_BY_HANDLE_32:
-		return xfs_compat_fssetdm_by_handle(mp, arg, inode);
+		return xfs_compat_fssetdm_by_handle(filp, arg);
 	default:
 		return -XFS_ERROR(ENOIOCTLCMD);
 	}
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 95a9710..c71e226 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -1197,6 +1197,7 @@
 	struct xfs_mount	*mp = XFS_M(sb);
 	substring_t		args[MAX_OPT_ARGS];
 	char			*p;
+	int			error;
 
 	while ((p = strsep(&options, ",")) != NULL) {
 		int token;
@@ -1247,11 +1248,25 @@
 		}
 	}
 
-	/* rw/ro -> rw */
+	/* ro -> rw */
 	if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) {
 		mp->m_flags &= ~XFS_MOUNT_RDONLY;
 		if (mp->m_flags & XFS_MOUNT_BARRIER)
 			xfs_mountfs_check_barriers(mp);
+
+		/*
+		 * If this is the first remount to writeable state we
+		 * might have some superblock changes to update.
+		 */
+		if (mp->m_update_flags) {
+			error = xfs_mount_log_sb(mp, mp->m_update_flags);
+			if (error) {
+				cmn_err(CE_WARN,
+					"XFS: failed to write sb changes");
+				return error;
+			}
+			mp->m_update_flags = 0;
+		}
 	}
 
 	/* rw -> ro */
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 591ca66..6543c0b 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -73,6 +73,8 @@
 int xfs_dqerror_mod = 33;
 #endif
 
+static struct lock_class_key xfs_dquot_other_class;
+
 /*
  * Allocate and initialize a dquot. We don't always allocate fresh memory;
  * we try to reclaim a free dquot if the number of incore dquots are above
@@ -139,7 +141,15 @@
 		 ASSERT(dqp->q_trace);
 		 xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT");
 #endif
-	 }
+	}
+
+	/*
+	 * In either case we need to make sure group quotas have a different
+	 * lock class than user quotas, to make sure lockdep knows we can
+	 * locks of one of each at the same time.
+	 */
+	if (!(type & XFS_DQ_USER))
+		lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
 
 	/*
 	 * log item gets initialized later
@@ -421,7 +431,7 @@
 	/*
 	 * Initialize the bmap freelist prior to calling bmapi code.
 	 */
-	XFS_BMAP_INIT(&flist, &firstblock);
+	xfs_bmap_init(&flist, &firstblock);
 	xfs_ilock(quotip, XFS_ILOCK_EXCL);
 	/*
 	 * Return if this type of quotas is turned off while we didn't
@@ -1383,6 +1393,12 @@
 	mutex_unlock(&(dqp->q_qlock));
 }
 
+/*
+ * Lock two xfs_dquot structures.
+ *
+ * To avoid deadlocks we always lock the quota structure with
+ * the lowerd id first.
+ */
 void
 xfs_dqlock2(
 	xfs_dquot_t	*d1,
@@ -1392,18 +1408,16 @@
 		ASSERT(d1 != d2);
 		if (be32_to_cpu(d1->q_core.d_id) >
 		    be32_to_cpu(d2->q_core.d_id)) {
-			xfs_dqlock(d2);
-			xfs_dqlock(d1);
+			mutex_lock(&d2->q_qlock);
+			mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED);
 		} else {
-			xfs_dqlock(d1);
-			xfs_dqlock(d2);
+			mutex_lock(&d1->q_qlock);
+			mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED);
 		}
-	} else {
-		if (d1) {
-			xfs_dqlock(d1);
-		} else if (d2) {
-			xfs_dqlock(d2);
-		}
+	} else if (d1) {
+		mutex_lock(&d1->q_qlock);
+	} else if (d2) {
+		mutex_lock(&d2->q_qlock);
 	}
 }
 
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 7e455337..d443e93 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -97,6 +97,16 @@
 #define dq_hashlist	q_lists.dqm_hashlist
 #define dq_flags	q_lists.dqm_flags
 
+/*
+ * Lock hierachy for q_qlock:
+ *	XFS_QLOCK_NORMAL is the implicit default,
+ * 	XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2
+ */
+enum {
+	XFS_QLOCK_NORMAL = 0,
+	XFS_QLOCK_NESTED,
+};
+
 #define XFS_DQHOLD(dqp)		((dqp)->q_nrefs++)
 
 #ifdef DEBUG
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 6b13960..7a2beb6 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -1070,6 +1070,13 @@
 	return 0;
 }
 
+/*
+ * The hash chains and the mplist use the same xfs_dqhash structure as
+ * their list head, but we can take the mplist qh_lock and one of the
+ * hash qh_locks at the same time without any problem as they aren't
+ * related.
+ */
+static struct lock_class_key xfs_quota_mplist_class;
 
 /*
  * This initializes all the quota information that's kept in the
@@ -1105,6 +1112,8 @@
 	}
 
 	xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0);
+	lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class);
+
 	qinf->qi_dqreclaims = 0;
 
 	/* mutex used to serialize quotaoffs */
diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index d3b3cf7..143d63e 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -244,8 +244,8 @@
 #define	XFS_AG_CHECK_DADDR(mp,d,len)	\
 	((len) == 1 ? \
 	    ASSERT((d) == XFS_SB_DADDR || \
-		   XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \
-	    ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \
-		   XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1)))
+		   xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \
+	    ASSERT(xfs_daddr_to_agno(mp, d) == \
+		   xfs_daddr_to_agno(mp, (d) + (len) - 1)))
 
 #endif	/* __XFS_AG_H__ */
diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c
index 733cb75..c10c3a2 100644
--- a/fs/xfs/xfs_alloc_btree.c
+++ b/fs/xfs/xfs_alloc_btree.c
@@ -115,7 +115,7 @@
 	xfs_agblock_t		bno;
 	int			error;
 
-	bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp));
+	bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp));
 	error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1);
 	if (error)
 		return error;
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index f7cdc28..5fde165 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -374,7 +374,7 @@
 		 * It won't fit in the shortform, transform to a leaf block.
 		 * GROT: another possible req'mt for a double-split btree op.
 		 */
-		XFS_BMAP_INIT(args.flist, args.firstblock);
+		xfs_bmap_init(args.flist, args.firstblock);
 		error = xfs_attr_shortform_to_leaf(&args);
 		if (!error) {
 			error = xfs_bmap_finish(&args.trans, args.flist,
@@ -956,7 +956,7 @@
 		 * Commit that transaction so that the node_addname() call
 		 * can manage its own transactions.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_attr_leaf_to_node(args);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1057,7 +1057,7 @@
 		 * If the result is small enough, shrink it all into the inode.
 		 */
 		if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 			/* bp is gone due to xfs_da_shrink_inode */
 			if (!error) {
@@ -1135,7 +1135,7 @@
 	 * If the result is small enough, shrink it all into the inode.
 	 */
 	if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 		/* bp is gone due to xfs_da_shrink_inode */
 		if (!error) {
@@ -1290,7 +1290,7 @@
 			 * have been a b-tree.
 			 */
 			xfs_da_state_free(state);
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_node(args);
 			if (!error) {
 				error = xfs_bmap_finish(&args->trans,
@@ -1331,7 +1331,7 @@
 		 * in the index/blkno/rmtblkno/rmtblkcnt fields and
 		 * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_da_split(state);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1443,7 +1443,7 @@
 		 * Check to see if the tree needs to be collapsed.
 		 */
 		if (retval && (state->path.active > 1)) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_da_join(state);
 			if (!error) {
 				error = xfs_bmap_finish(&args->trans,
@@ -1579,7 +1579,7 @@
 	 * Check to see if the tree needs to be collapsed.
 	 */
 	if (retval && (state->path.active > 1)) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_da_join(state);
 		if (!error) {
 			error = xfs_bmap_finish(&args->trans, args->flist,
@@ -1630,7 +1630,7 @@
 						       == XFS_ATTR_LEAF_MAGIC);
 
 		if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) {
-			XFS_BMAP_INIT(args->flist, args->firstblock);
+			xfs_bmap_init(args->flist, args->firstblock);
 			error = xfs_attr_leaf_to_shortform(bp, args, forkoff);
 			/* bp is gone due to xfs_da_shrink_inode */
 			if (!error) {
@@ -2069,7 +2069,7 @@
 		/*
 		 * Allocate a single extent, up to the size of the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno,
 				  blkcnt,
@@ -2123,7 +2123,7 @@
 		/*
 		 * Try to remember where we decided to put the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno,
 				  args->rmtblkcnt,
@@ -2188,7 +2188,7 @@
 		/*
 		 * Try to remember where we decided to put the value.
 		 */
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		nmap = 1;
 		error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno,
 					args->rmtblkcnt,
@@ -2229,7 +2229,7 @@
 	blkcnt = args->rmtblkcnt;
 	done = 0;
 	while (!done) {
-		XFS_BMAP_INIT(args->flist, args->firstblock);
+		xfs_bmap_init(args->flist, args->firstblock);
 		error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
 				    XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
 				    1, args->firstblock, args->flist,
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 138308e..c852cd6 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -595,9 +595,9 @@
 		xfs_iext_insert(ifp, 0, 1, new);
 		ASSERT(cur == NULL);
 		ifp->if_lastex = 0;
-		if (!ISNULLSTARTBLOCK(new->br_startblock)) {
+		if (!isnullstartblock(new->br_startblock)) {
 			XFS_IFORK_NEXT_SET(ip, whichfork, 1);
-			logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else
 			logflags = 0;
 		/* DELTA: single new extent */
@@ -613,7 +613,7 @@
 	/*
 	 * Any kind of new delayed allocation goes here.
 	 */
-	else if (ISNULLSTARTBLOCK(new->br_startblock)) {
+	else if (isnullstartblock(new->br_startblock)) {
 		if (cur)
 			ASSERT((cur->bc_private.b.flags &
 				XFS_BTCUR_BPRV_WASDEL) == 0);
@@ -644,11 +644,11 @@
 		 * in a delayed or unwritten allocation with a real one, or
 		 * converting real back to unwritten.
 		 */
-		if (!ISNULLSTARTBLOCK(new->br_startblock) &&
+		if (!isnullstartblock(new->br_startblock) &&
 		    new->br_startoff + new->br_blockcount > prev.br_startoff) {
 			if (prev.br_state != XFS_EXT_UNWRITTEN &&
-			    ISNULLSTARTBLOCK(prev.br_startblock)) {
-				da_old = STARTBLOCKVAL(prev.br_startblock);
+			    isnullstartblock(prev.br_startblock)) {
+				da_old = startblockval(prev.br_startblock);
 				if (cur)
 					ASSERT(cur->bc_private.b.flags &
 						XFS_BTCUR_BPRV_WASDEL);
@@ -803,7 +803,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
 	}
 	STATE_SET(LEFT_CONTIG,
 		STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -820,7 +820,7 @@
 			idx <
 			ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
 	}
 	STATE_SET(RIGHT_CONTIG,
 		STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1019,8 +1019,8 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock));
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			startblockval(PREV.br_startblock));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: The boundary between two in-core extents moved. */
@@ -1067,10 +1067,10 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock) -
+			startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		ep = xfs_iext_get_ext(ifp, idx + 1);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: One in-core extent is split in two. */
@@ -1110,8 +1110,8 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock));
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			startblockval(PREV.br_startblock));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: The boundary between two in-core extents moved. */
@@ -1157,10 +1157,10 @@
 				goto done;
 		}
 		temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
-			STARTBLOCKVAL(PREV.br_startblock) -
+			startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		ep = xfs_iext_get_ext(ifp, idx);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK);
 		*dnew = temp;
 		/* DELTA: One in-core extent is split in two. */
@@ -1213,7 +1213,7 @@
 		}
 		temp = xfs_bmap_worst_indlen(ip, temp);
 		temp2 = xfs_bmap_worst_indlen(ip, temp2);
-		diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) -
+		diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) -
 			(cur ? cur->bc_private.b.allocated : 0));
 		if (diff > 0 &&
 		    xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) {
@@ -1241,11 +1241,11 @@
 			}
 		}
 		ep = xfs_iext_get_ext(ifp, idx);
-		xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+		xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 		XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK);
 		XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2),
-			NULLSTARTBLOCK((int)temp2));
+			nullstartblock((int)temp2));
 		XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK);
 		*dnew = temp + temp2;
 		/* DELTA: One in-core extent is split in three. */
@@ -1365,7 +1365,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock));
 	}
 	STATE_SET(LEFT_CONTIG,
 		STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) &&
@@ -1382,7 +1382,7 @@
 			idx <
 			ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock));
 	}
 	STATE_SET(RIGHT_CONTIG,
 		STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) &&
@@ -1889,13 +1889,13 @@
 	ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 	ep = xfs_iext_get_ext(ifp, idx);
 	state = 0;
-	ASSERT(ISNULLSTARTBLOCK(new->br_startblock));
+	ASSERT(isnullstartblock(new->br_startblock));
 	/*
 	 * Check and set flags if this segment has a left neighbor
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
 	}
 	/*
 	 * Check and set flags if the current (right) segment exists.
@@ -1905,7 +1905,7 @@
 			   idx <
 			   ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
 		xfs_bmbt_get_all(ep, &right);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
 	}
 	/*
 	 * Set contiguity flags on the left and right neighbors.
@@ -1938,12 +1938,12 @@
 		XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1,
 			XFS_DATA_FORK);
 		xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-		oldlen = STARTBLOCKVAL(left.br_startblock) +
-			STARTBLOCKVAL(new->br_startblock) +
-			STARTBLOCKVAL(right.br_startblock);
+		oldlen = startblockval(left.br_startblock) +
+			startblockval(new->br_startblock) +
+			startblockval(right.br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-			NULLSTARTBLOCK((int)newlen));
+			nullstartblock((int)newlen));
 		XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1,
 			XFS_DATA_FORK);
 		XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK);
@@ -1964,11 +1964,11 @@
 		XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1,
 			XFS_DATA_FORK);
 		xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp);
-		oldlen = STARTBLOCKVAL(left.br_startblock) +
-			STARTBLOCKVAL(new->br_startblock);
+		oldlen = startblockval(left.br_startblock) +
+			startblockval(new->br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1),
-			NULLSTARTBLOCK((int)newlen));
+			nullstartblock((int)newlen));
 		XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1,
 			XFS_DATA_FORK);
 		ip->i_df.if_lastex = idx - 1;
@@ -1985,11 +1985,11 @@
 		 */
 		XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK);
 		temp = new->br_blockcount + right.br_blockcount;
-		oldlen = STARTBLOCKVAL(new->br_startblock) +
-			STARTBLOCKVAL(right.br_startblock);
+		oldlen = startblockval(new->br_startblock) +
+			startblockval(right.br_startblock);
 		newlen = xfs_bmap_worst_indlen(ip, temp);
 		xfs_bmbt_set_allf(ep, new->br_startoff,
-			NULLSTARTBLOCK((int)newlen), temp, right.br_state);
+			nullstartblock((int)newlen), temp, right.br_state);
 		XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK);
 		ip->i_df.if_lastex = idx;
 		/* DELTA: One in-core extent grew into a hole. */
@@ -2085,7 +2085,7 @@
 	 */
 	if (STATE_SET_TEST(LEFT_VALID, idx > 0)) {
 		xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left);
-		STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock));
+		STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock));
 	}
 	/*
 	 * Check and set flags if this segment has a current value.
@@ -2095,7 +2095,7 @@
 			   idx <
 			   ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) {
 		xfs_bmbt_get_all(ep, &right);
-		STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock));
+		STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock));
 	}
 	/*
 	 * We're inserting a real allocation between "left" and "right".
@@ -2143,7 +2143,7 @@
 		XFS_IFORK_NEXT_SET(ip, whichfork,
 			XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
 		if (cur == NULL) {
-			rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else {
 			rval = XFS_ILOG_CORE;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2185,7 +2185,7 @@
 		XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork);
 		ifp->if_lastex = idx - 1;
 		if (cur == NULL) {
-			rval = XFS_ILOG_FEXT(whichfork);
+			rval = xfs_ilog_fext(whichfork);
 		} else {
 			rval = 0;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2220,7 +2220,7 @@
 		XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork);
 		ifp->if_lastex = idx;
 		if (cur == NULL) {
-			rval = XFS_ILOG_FEXT(whichfork);
+			rval = xfs_ilog_fext(whichfork);
 		} else {
 			rval = 0;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2254,7 +2254,7 @@
 		XFS_IFORK_NEXT_SET(ip, whichfork,
 			XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
 		if (cur == NULL) {
-			rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+			rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 		} else {
 			rval = XFS_ILOG_CORE;
 			if ((error = xfs_bmbt_lookup_eq(cur,
@@ -2482,7 +2482,7 @@
 	 * try to use it's last block as our starting point.
 	 */
 	if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF &&
-	    !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+	    !isnullstartblock(ap->prevp->br_startblock) &&
 	    ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount,
 		    ap->prevp->br_startblock)) {
 		ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount;
@@ -2511,7 +2511,7 @@
 		 * start block based on it.
 		 */
 		if (ap->prevp->br_startoff != NULLFILEOFF &&
-		    !ISNULLSTARTBLOCK(ap->prevp->br_startblock) &&
+		    !isnullstartblock(ap->prevp->br_startblock) &&
 		    (prevbno = ap->prevp->br_startblock +
 			       ap->prevp->br_blockcount) &&
 		    ISVALID(prevbno, ap->prevp->br_startblock)) {
@@ -2552,7 +2552,7 @@
 		 * If there's a following (right) block, select a requested
 		 * start block based on it.
 		 */
-		if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) {
+		if (!isnullstartblock(ap->gotp->br_startblock)) {
 			/*
 			 * Calculate gap to start of next block.
 			 */
@@ -3082,7 +3082,7 @@
 	ASSERT(ifp->if_broot == NULL);
 	ASSERT((ifp->if_flags & XFS_IFBROOT) == 0);
 	XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS);
-	*logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork);
+	*logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork);
 	return 0;
 }
 
@@ -3136,8 +3136,8 @@
 	del_endoff = del->br_startoff + del->br_blockcount;
 	got_endoff = got.br_startoff + got.br_blockcount;
 	ASSERT(got_endoff >= del_endoff);
-	delay = ISNULLSTARTBLOCK(got.br_startblock);
-	ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay);
+	delay = isnullstartblock(got.br_startblock);
+	ASSERT(isnullstartblock(del->br_startblock) == delay);
 	flags = 0;
 	qfield = 0;
 	error = 0;
@@ -3189,7 +3189,7 @@
 		}
 		da_old = da_new = 0;
 	} else {
-		da_old = STARTBLOCKVAL(got.br_startblock);
+		da_old = startblockval(got.br_startblock);
 		da_new = 0;
 		nblks = 0;
 		do_fx = 0;
@@ -3213,7 +3213,7 @@
 			XFS_IFORK_NEXTENTS(ip, whichfork) - 1);
 		flags |= XFS_ILOG_CORE;
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_btree_delete(cur, &i)))
@@ -3233,7 +3233,7 @@
 		if (delay) {
 			temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
 				da_old);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx,
 				whichfork);
 			da_new = temp;
@@ -3242,7 +3242,7 @@
 		xfs_bmbt_set_startblock(ep, del_endblock);
 		XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork);
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock,
@@ -3262,7 +3262,7 @@
 		if (delay) {
 			temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp),
 				da_old);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx,
 				whichfork);
 			da_new = temp;
@@ -3270,7 +3270,7 @@
 		}
 		XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork);
 		if (!cur) {
-			flags |= XFS_ILOG_FEXT(whichfork);
+			flags |= xfs_ilog_fext(whichfork);
 			break;
 		}
 		if ((error = xfs_bmbt_update(cur, got.br_startoff,
@@ -3345,22 +3345,22 @@
 				}
 				XFS_WANT_CORRUPTED_GOTO(i == 1, done);
 			} else
-				flags |= XFS_ILOG_FEXT(whichfork);
+				flags |= xfs_ilog_fext(whichfork);
 			XFS_IFORK_NEXT_SET(ip, whichfork,
 				XFS_IFORK_NEXTENTS(ip, whichfork) + 1);
 		} else {
 			ASSERT(whichfork == XFS_DATA_FORK);
 			temp = xfs_bmap_worst_indlen(ip, temp);
-			xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp));
+			xfs_bmbt_set_startblock(ep, nullstartblock((int)temp));
 			temp2 = xfs_bmap_worst_indlen(ip, temp2);
-			new.br_startblock = NULLSTARTBLOCK((int)temp2);
+			new.br_startblock = nullstartblock((int)temp2);
 			da_new = temp + temp2;
 			while (da_new > da_old) {
 				if (temp) {
 					temp--;
 					da_new--;
 					xfs_bmbt_set_startblock(ep,
-						NULLSTARTBLOCK((int)temp));
+						nullstartblock((int)temp));
 				}
 				if (da_new == da_old)
 					break;
@@ -3368,7 +3368,7 @@
 					temp2--;
 					da_new--;
 					new.br_startblock =
-						NULLSTARTBLOCK((int)temp2);
+						nullstartblock((int)temp2);
 				}
 			}
 		}
@@ -3545,7 +3545,7 @@
 	nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t);
 	for (cnt = i = 0; i < nextents; i++) {
 		ep = xfs_iext_get_ext(ifp, i);
-		if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) {
+		if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) {
 			arp->l0 = cpu_to_be64(ep->l0);
 			arp->l1 = cpu_to_be64(ep->l1);
 			arp++; cnt++;
@@ -3572,7 +3572,7 @@
 	xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs));
 	ASSERT(*curp == NULL);
 	*curp = cur;
-	*logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork);
+	*logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork);
 	return 0;
 }
 
@@ -3676,7 +3676,7 @@
 		ip->i_d.di_nblocks = 1;
 		XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip,
 			XFS_TRANS_DQ_BCOUNT, 1L);
-		flags |= XFS_ILOG_FEXT(whichfork);
+		flags |= xfs_ilog_fext(whichfork);
 	} else {
 		ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0);
 		xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork);
@@ -4082,7 +4082,7 @@
 		XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t);
 	ip->i_afp->if_flags = XFS_IFEXTENTS;
 	logflags = 0;
-	XFS_BMAP_INIT(&flist, &firstblock);
+	xfs_bmap_init(&flist, &firstblock);
 	switch (ip->i_d.di_format) {
 	case XFS_DINODE_FMT_LOCAL:
 		error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist,
@@ -4162,7 +4162,7 @@
 	ASSERT(bno != NULLFSBLOCK);
 	ASSERT(len > 0);
 	ASSERT(len <= MAXEXTLEN);
-	ASSERT(!ISNULLSTARTBLOCK(bno));
+	ASSERT(!isnullstartblock(bno));
 	agno = XFS_FSB_TO_AGNO(mp, bno);
 	agbno = XFS_FSB_TO_AGBNO(mp, bno);
 	ASSERT(agno < mp->m_sb.sb_agcount);
@@ -4909,7 +4909,7 @@
 			got.br_startoff = end;
 		inhole = eof || got.br_startoff > bno;
 		wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) &&
-			ISNULLSTARTBLOCK(got.br_startblock);
+			isnullstartblock(got.br_startblock);
 		/*
 		 * First, deal with the hole before the allocated space
 		 * that we found, if any.
@@ -5028,7 +5028,7 @@
 				}
 
 				ip->i_delayed_blks += alen;
-				abno = NULLSTARTBLOCK(indlen);
+				abno = nullstartblock(indlen);
 			} else {
 				/*
 				 * If first time, allocate and fill in
@@ -5144,8 +5144,8 @@
 				aoff + alen);
 #ifdef DEBUG
 			if (flags & XFS_BMAPI_DELAY) {
-				ASSERT(ISNULLSTARTBLOCK(got.br_startblock));
-				ASSERT(STARTBLOCKVAL(got.br_startblock) > 0);
+				ASSERT(isnullstartblock(got.br_startblock));
+				ASSERT(startblockval(got.br_startblock) > 0);
 			}
 			ASSERT(got.br_state == XFS_EXT_NORM ||
 			       got.br_state == XFS_EXT_UNWRITTEN);
@@ -5179,7 +5179,7 @@
 			ASSERT((bno >= obno) || (n == 0));
 			ASSERT(bno < end);
 			mval->br_startoff = bno;
-			if (ISNULLSTARTBLOCK(got.br_startblock)) {
+			if (isnullstartblock(got.br_startblock)) {
 				ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
 				mval->br_startblock = DELAYSTARTBLOCK;
 			} else
@@ -5201,7 +5201,7 @@
 			ASSERT(mval->br_blockcount <= len);
 		} else {
 			*mval = got;
-			if (ISNULLSTARTBLOCK(mval->br_startblock)) {
+			if (isnullstartblock(mval->br_startblock)) {
 				ASSERT(!wr || (flags & XFS_BMAPI_DELAY));
 				mval->br_startblock = DELAYSTARTBLOCK;
 			}
@@ -5329,12 +5329,12 @@
 	 * Log everything.  Do this after conversion, there's no point in
 	 * logging the extent records if we've converted to btree format.
 	 */
-	if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+	if ((logflags & xfs_ilog_fext(whichfork)) &&
 	    XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-		logflags &= ~XFS_ILOG_FEXT(whichfork);
-	else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+		logflags &= ~xfs_ilog_fext(whichfork);
+	else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
 		 XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-		logflags &= ~XFS_ILOG_FBROOT(whichfork);
+		logflags &= ~xfs_ilog_fbroot(whichfork);
 	/*
 	 * Log whatever the flags say, even if error.  Otherwise we might miss
 	 * detecting a case where the data is changed, there's an error,
@@ -5411,7 +5411,7 @@
 		*fsb = NULLFSBLOCK;
 		return 0;
 	}
-	ASSERT(!ISNULLSTARTBLOCK(got.br_startblock));
+	ASSERT(!isnullstartblock(got.br_startblock));
 	ASSERT(bno < got.br_startoff + got.br_blockcount);
 	*fsb = got.br_startblock + (bno - got.br_startoff);
 	ifp->if_lastex = lastx;
@@ -5543,7 +5543,7 @@
 		 */
 		ASSERT(ep != NULL);
 		del = got;
-		wasdel = ISNULLSTARTBLOCK(del.br_startblock);
+		wasdel = isnullstartblock(del.br_startblock);
 		if (got.br_startoff < start) {
 			del.br_startoff = start;
 			del.br_blockcount -= start - got.br_startoff;
@@ -5638,7 +5638,7 @@
 				xfs_bmbt_get_all(xfs_iext_get_ext(ifp,
 						lastx - 1), &prev);
 				ASSERT(prev.br_state == XFS_EXT_NORM);
-				ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock));
+				ASSERT(!isnullstartblock(prev.br_startblock));
 				ASSERT(del.br_startblock ==
 				       prev.br_startblock + prev.br_blockcount);
 				if (prev.br_startoff < start) {
@@ -5666,7 +5666,7 @@
 			}
 		}
 		if (wasdel) {
-			ASSERT(STARTBLOCKVAL(del.br_startblock) > 0);
+			ASSERT(startblockval(del.br_startblock) > 0);
 			/* Update realtime/data freespace, unreserve quota */
 			if (isrt) {
 				xfs_filblks_t rtexts;
@@ -5782,12 +5782,12 @@
 	 * Log everything.  Do this after conversion, there's no point in
 	 * logging the extent records if we've converted to btree format.
 	 */
-	if ((logflags & XFS_ILOG_FEXT(whichfork)) &&
+	if ((logflags & xfs_ilog_fext(whichfork)) &&
 	    XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS)
-		logflags &= ~XFS_ILOG_FEXT(whichfork);
-	else if ((logflags & XFS_ILOG_FBROOT(whichfork)) &&
+		logflags &= ~xfs_ilog_fext(whichfork);
+	else if ((logflags & xfs_ilog_fbroot(whichfork)) &&
 		 XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE)
-		logflags &= ~XFS_ILOG_FBROOT(whichfork);
+		logflags &= ~xfs_ilog_fbroot(whichfork);
 	/*
 	 * Log inode even in the error case, if the transaction
 	 * is dirty we'll need to shut down the filesystem.
@@ -5838,7 +5838,7 @@
 		if (startblock == DELAYSTARTBLOCK)
 			out->bmv_block = -2;
 		else
-			out->bmv_block = XFS_FSB_TO_DB(ip, startblock);
+			out->bmv_block = xfs_fsb_to_db(ip, startblock);
 		fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset);
 		ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
 		if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) &&
@@ -5979,7 +5979,7 @@
 	if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
 		nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
 
-	bmapi_flags = XFS_BMAPI_AFLAG(whichfork) |
+	bmapi_flags = xfs_bmapi_aflag(whichfork) |
 			((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
 
 	/*
@@ -6098,7 +6098,7 @@
 	 */
 	*aeof = (off >= s.br_startoff &&
 		 off < s.br_startoff + s.br_blockcount &&
-		 ISNULLSTARTBLOCK(s.br_startblock)) ||
+		 isnullstartblock(s.br_startblock)) ||
 		off >= s.br_startoff + s.br_blockcount;
 	return 0;
 }
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 284571c..be2979d 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -95,7 +95,6 @@
 					/* need write cache flushing and no */
 					/* additional allocation alignments */
 
-#define	XFS_BMAPI_AFLAG(w)	xfs_bmapi_aflag(w)
 static inline int xfs_bmapi_aflag(int w)
 {
 	return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0);
@@ -107,7 +106,6 @@
 #define	DELAYSTARTBLOCK		((xfs_fsblock_t)-1LL)
 #define	HOLESTARTBLOCK		((xfs_fsblock_t)-2LL)
 
-#define	XFS_BMAP_INIT(flp,fbp)	xfs_bmap_init(flp,fbp)
 static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp)
 {
 	((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index ba6b08c..0760d352 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -121,7 +121,7 @@
 
 		b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
 		    (((xfs_dfsbno_t)l1) >> 21);
-		ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+		ASSERT((b >> 32) == 0 || isnulldstartblock(b));
 		s->br_startblock = (xfs_fsblock_t)b;
 	}
 #else	/* !DEBUG */
@@ -172,7 +172,7 @@
 
 	b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
 	    (((xfs_dfsbno_t)r->l1) >> 21);
-	ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
+	ASSERT((b >> 32) == 0 || isnulldstartblock(b));
 	return (xfs_fsblock_t)b;
 #else	/* !DEBUG */
 	return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21);
@@ -261,7 +261,7 @@
 		((xfs_bmbt_rec_base_t)blockcount &
 		(xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(startblock)) {
+	if (isnullstartblock(startblock)) {
 		r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			((xfs_bmbt_rec_base_t)startoff << 9) |
 			 (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
@@ -321,7 +321,7 @@
 		 ((xfs_bmbt_rec_base_t)blockcount &
 		  (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(startblock)) {
+	if (isnullstartblock(startblock)) {
 		r->l0 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			 ((xfs_bmbt_rec_base_t)startoff << 9) |
@@ -382,7 +382,7 @@
 	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
 		  (xfs_bmbt_rec_base_t)(v << 21);
 #else	/* !XFS_BIG_BLKNOS */
-	if (ISNULLSTARTBLOCK(v)) {
+	if (isnullstartblock(v)) {
 		r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
 		r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)v << 21) |
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index a4555ab..0e8df00 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -76,26 +76,22 @@
 #define DSTARTBLOCKMASK		\
 	(((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS)
 
-#define ISNULLSTARTBLOCK(x)	isnullstartblock(x)
 static inline int isnullstartblock(xfs_fsblock_t x)
 {
 	return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK;
 }
 
-#define ISNULLDSTARTBLOCK(x)	isnulldstartblock(x)
 static inline int isnulldstartblock(xfs_dfsbno_t x)
 {
 	return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK;
 }
 
-#define NULLSTARTBLOCK(k)	nullstartblock(k)
 static inline xfs_fsblock_t nullstartblock(int k)
 {
 	ASSERT(k < (1 << STARTBLOCKVALBITS));
 	return STARTBLOCKMASK | (k);
 }
 
-#define STARTBLOCKVAL(x)	startblockval(x)
 static inline xfs_filblks_t startblockval(xfs_fsblock_t x)
 {
 	return (xfs_filblks_t)((x) & ~STARTBLOCKMASK);
diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 2c3ef20..e73c332 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -843,7 +843,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-		return be64_to_cpu(ptr->l) == NULLFSBLOCK;
+		return be64_to_cpu(ptr->l) == NULLDFSBNO;
 	else
 		return be32_to_cpu(ptr->s) == NULLAGBLOCK;
 }
@@ -854,7 +854,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS)
-		ptr->l = cpu_to_be64(NULLFSBLOCK);
+		ptr->l = cpu_to_be64(NULLDFSBNO);
 	else
 		ptr->s = cpu_to_be32(NULLAGBLOCK);
 }
@@ -918,8 +918,8 @@
 	new->bb_numrecs = cpu_to_be16(numrecs);
 
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-		new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK);
-		new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK);
+		new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO);
+		new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO);
 	} else {
 		new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK);
 		new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK);
@@ -960,7 +960,7 @@
 		ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp,
 					XFS_BUF_ADDR(bp)));
 	else {
-		ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp,
+		ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp,
 					XFS_BUF_ADDR(bp)));
 	}
 }
@@ -971,7 +971,7 @@
 	union xfs_btree_ptr	*ptr)
 {
 	if (cur->bc_flags & XFS_BTREE_LONG_PTRS) {
-		ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK);
+		ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO);
 
 		return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l));
 	} else {
@@ -2454,7 +2454,7 @@
 	xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs));
 
 	*logflags |=
-		XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork);
+		XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork);
 	*stat = 1;
 	XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
 	return 0;
@@ -3048,7 +3048,7 @@
 	cur->bc_bufs[level - 1] = NULL;
 	be16_add_cpu(&block->bb_level, -1);
 	xfs_trans_log_inode(cur->bc_tp, ip,
-		XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork));
+		XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork));
 	cur->bc_nlevels--;
 out0:
 	XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT);
diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c
index a11a839..c45f74f 100644
--- a/fs/xfs/xfs_da_btree.c
+++ b/fs/xfs/xfs_da_btree.c
@@ -1597,7 +1597,7 @@
 	nmap = 1;
 	ASSERT(args->firstblock != NULL);
 	if ((error = xfs_bmapi(tp, dp, bno, count,
-			XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
+			xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA|
 			XFS_BMAPI_CONTIG,
 			args->firstblock, args->total, &map, &nmap,
 			args->flist, NULL))) {
@@ -1618,7 +1618,7 @@
 			nmap = MIN(XFS_BMAP_MAX_NMAP, count);
 			c = (int)(bno + count - b);
 			if ((error = xfs_bmapi(tp, dp, b, c,
-					XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|
+					xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|
 					XFS_BMAPI_METADATA,
 					args->firstblock, args->total,
 					&mapp[mapi], &nmap, args->flist,
@@ -1882,7 +1882,7 @@
 		 * the last block to the place we want to kill.
 		 */
 		if ((error = xfs_bunmapi(tp, dp, dead_blkno, count,
-				XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA,
+				xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA,
 				0, args->firstblock, args->flist, NULL,
 				&done)) == ENOSPC) {
 			if (w != XFS_DATA_FORK)
@@ -1987,7 +1987,7 @@
 			if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno,
 					nfsb,
 					XFS_BMAPI_METADATA |
-						XFS_BMAPI_AFLAG(whichfork),
+						xfs_bmapi_aflag(whichfork),
 					NULL, 0, mapp, &nmap, NULL, NULL)))
 				goto exit0;
 		}
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index e6ebbaeb..ab016e5 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -357,7 +357,7 @@
 			int	ioffset = i << args.mp->m_sb.sb_inodelog;
 			uint	isize = sizeof(struct xfs_dinode);
 
-			free = XFS_MAKE_IPTR(args.mp, fbuf, i);
+			free = xfs_make_iptr(args.mp, fbuf, i);
 			free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC);
 			free->di_version = version;
 			free->di_gen = cpu_to_be32(gen);
@@ -937,7 +937,7 @@
 			}
 		}
 	}
-	offset = XFS_IALLOC_FIND_FREE(&rec.ir_free);
+	offset = xfs_ialloc_find_free(&rec.ir_free);
 	ASSERT(offset >= 0);
 	ASSERT(offset < XFS_INODES_PER_CHUNK);
 	ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) %
@@ -1279,7 +1279,7 @@
 		offset = XFS_INO_TO_OFFSET(mp, ino);
 		ASSERT(offset < mp->m_sb.sb_inopblock);
 
-		cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno);
+		cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno);
 		offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock;
 
 		imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster);
diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h
index 50f558a..aeee827 100644
--- a/fs/xfs/xfs_ialloc.h
+++ b/fs/xfs/xfs_ialloc.h
@@ -39,7 +39,6 @@
 /*
  * Make an inode pointer out of the buffer/offset.
  */
-#define	XFS_MAKE_IPTR(mp,b,o)		xfs_make_iptr(mp,b,o)
 static inline struct xfs_dinode *
 xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o)
 {
@@ -50,7 +49,6 @@
 /*
  * Find a free (set) bit in the inode bitmask.
  */
-#define	XFS_IALLOC_FIND_FREE(fp)	xfs_ialloc_find_free(fp)
 static inline int xfs_ialloc_find_free(xfs_inofree_t *fp)
 {
 	return xfs_lowbit64(*fp);
diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h
index 37e5dd0..5580e25 100644
--- a/fs/xfs/xfs_ialloc_btree.h
+++ b/fs/xfs/xfs_ialloc_btree.h
@@ -36,7 +36,6 @@
 #define	XFS_INODES_PER_CHUNK_LOG	(XFS_NBBYLOG + 3)
 #define	XFS_INOBT_ALL_FREE	((xfs_inofree_t)-1)
 
-#define	XFS_INOBT_MASKN(i,n)		xfs_inobt_maskn(i,n)
 static inline xfs_inofree_t xfs_inobt_maskn(int i, int n)
 {
 	return (((n) >= XFS_INODES_PER_CHUNK ? \
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index 5a5e035..e7ae08d 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -424,6 +424,19 @@
 	case XFS_DINODE_FMT_LOCAL:
 		atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip);
 		size = be16_to_cpu(atp->hdr.totsize);
+
+		if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) {
+			xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount,
+				"corrupt inode %Lu "
+				"(bad attr fork size %Ld).",
+				(unsigned long long) ip->i_ino,
+				(long long) size);
+			XFS_CORRUPTION_ERROR("xfs_iformat(8)",
+					     XFS_ERRLEVEL_LOW,
+					     ip->i_mount, dip);
+			return XFS_ERROR(EFSCORRUPTED);
+		}
+
 		error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size);
 		break;
 	case XFS_DINODE_FMT_EXTENTS:
@@ -1601,10 +1614,10 @@
 		 * in this file with garbage in them once recovery
 		 * runs.
 		 */
-		XFS_BMAP_INIT(&free_list, &first_block);
+		xfs_bmap_init(&free_list, &first_block);
 		error = xfs_bunmapi(ntp, ip,
 				    first_unmap_block, unmap_len,
-				    XFS_BMAPI_AFLAG(fork) |
+				    xfs_bmapi_aflag(fork) |
 				      (sync ? 0 : XFS_BMAPI_ASYNC),
 				    XFS_ITRUNC_MAX_EXTENTS,
 				    &first_block, &free_list,
@@ -2557,7 +2570,7 @@
 	for (i = 0; i < nrecs; i++) {
 		xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i);
 		start_block = xfs_bmbt_get_startblock(ep);
-		if (ISNULLSTARTBLOCK(start_block)) {
+		if (isnullstartblock(start_block)) {
 			/*
 			 * It's a delayed allocation extent, so skip it.
 			 */
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index 1ff04cc..9957d06 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -111,20 +111,16 @@
 
 #define	XFS_ILI_IOLOCKED_ANY   (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED)
 
-
-#define	XFS_ILOG_FBROOT(w)	xfs_ilog_fbroot(w)
 static inline int xfs_ilog_fbroot(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
 }
 
-#define	XFS_ILOG_FEXT(w)	xfs_ilog_fext(w)
 static inline int xfs_ilog_fext(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
 }
 
-#define	XFS_ILOG_FDATA(w)	xfs_ilog_fdata(w)
 static inline int xfs_ilog_fdata(int w)
 {
 	return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index 911062c..08ce723 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -155,7 +155,7 @@
 			iomapp->iomap_bn = IOMAP_DADDR_NULL;
 			iomapp->iomap_flags |= IOMAP_DELAY;
 		} else {
-			iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block);
+			iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block);
 			if (ISUNWRITTEN(imap))
 				iomapp->iomap_flags |= IOMAP_UNWRITTEN;
 		}
@@ -261,7 +261,7 @@
 		xfs_iunlock(ip, lockmode);
 		lockmode = 0;
 
-		if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) {
+		if (nimaps && !isnullstartblock(imap.br_startblock)) {
 			xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip,
 					offset, count, iomapp, &imap, flags);
 			break;
@@ -491,7 +491,7 @@
 	/*
 	 * Issue the xfs_bmapi() call to allocate the blocks
 	 */
-	XFS_BMAP_INIT(&free_list, &firstfsb);
+	xfs_bmap_init(&free_list, &firstfsb);
 	nimaps = 1;
 	error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
 		&firstfsb, 0, &imap, &nimaps, &free_list, NULL);
@@ -751,7 +751,7 @@
 			xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
 			xfs_trans_ihold(tp, ip);
 
-			XFS_BMAP_INIT(&free_list, &first_block);
+			xfs_bmap_init(&free_list, &first_block);
 
 			/*
 			 * it is possible that the extents have changed since
@@ -911,7 +911,7 @@
 		/*
 		 * Modify the unwritten extent state of the buffer.
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		nimaps = 1;
 		error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
 				  XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index e19d0a8..cf98a80 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -453,7 +453,7 @@
 			    (chunkidx = agino - gino + 1) <
 				    XFS_INODES_PER_CHUNK &&
 					/* there are some left allocated */
-			    XFS_INOBT_MASKN(chunkidx,
+			    xfs_inobt_maskn(chunkidx,
 				    XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) {
 				/*
 				 * Grab the chunk record.  Mark all the
@@ -464,7 +464,7 @@
 					if (XFS_INOBT_MASK(i) & ~gfree)
 						gcnt++;
 				}
-				gfree |= XFS_INOBT_MASKN(0, chunkidx);
+				gfree |= xfs_inobt_maskn(0, chunkidx);
 				irbp->ir_startino = gino;
 				irbp->ir_freecount = gcnt;
 				irbp->ir_free = gfree;
@@ -535,7 +535,7 @@
 				     chunkidx < XFS_INODES_PER_CHUNK;
 				     chunkidx += nicluster,
 				     agbno += nbcluster) {
-					if (XFS_INOBT_MASKN(chunkidx,
+					if (xfs_inobt_maskn(chunkidx,
 							    nicluster) & ~gfree)
 						xfs_btree_reada_bufs(mp, agno,
 							agbno, nbcluster);
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 3c97c64..3530025 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -45,7 +45,6 @@
 #include "xfs_fsops.h"
 #include "xfs_utils.h"
 
-STATIC int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 STATIC int	xfs_uuid_mount(xfs_mount_t *);
 STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
 
@@ -682,7 +681,7 @@
  * Update alignment values based on mount options and sb values
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags)
+xfs_update_alignment(xfs_mount_t *mp)
 {
 	xfs_sb_t	*sbp = &(mp->m_sb);
 
@@ -736,11 +735,11 @@
 		if (xfs_sb_version_hasdalign(sbp)) {
 			if (sbp->sb_unit != mp->m_dalign) {
 				sbp->sb_unit = mp->m_dalign;
-				*update_flags |= XFS_SB_UNIT;
+				mp->m_update_flags |= XFS_SB_UNIT;
 			}
 			if (sbp->sb_width != mp->m_swidth) {
 				sbp->sb_width = mp->m_swidth;
-				*update_flags |= XFS_SB_WIDTH;
+				mp->m_update_flags |= XFS_SB_WIDTH;
 			}
 		}
 	} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
@@ -905,7 +904,6 @@
 	xfs_sb_t	*sbp = &(mp->m_sb);
 	xfs_inode_t	*rip;
 	__uint64_t	resblks;
-	__int64_t	update_flags = 0LL;
 	uint		quotamount, quotaflags;
 	int		uuid_mounted = 0;
 	int		error = 0;
@@ -933,7 +931,7 @@
 			"XFS: correcting sb_features alignment problem");
 		sbp->sb_features2 |= sbp->sb_bad_features2;
 		sbp->sb_bad_features2 = sbp->sb_features2;
-		update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+		mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
 
 		/*
 		 * Re-check for ATTR2 in case it was found in bad_features2
@@ -947,11 +945,11 @@
 	if (xfs_sb_version_hasattr2(&mp->m_sb) &&
 	   (mp->m_flags & XFS_MOUNT_NOATTR2)) {
 		xfs_sb_version_removeattr2(&mp->m_sb);
-		update_flags |= XFS_SB_FEATURES2;
+		mp->m_update_flags |= XFS_SB_FEATURES2;
 
 		/* update sb_versionnum for the clearing of the morebits */
 		if (!sbp->sb_features2)
-			update_flags |= XFS_SB_VERSIONNUM;
+			mp->m_update_flags |= XFS_SB_VERSIONNUM;
 	}
 
 	/*
@@ -960,7 +958,7 @@
 	 * allocator alignment is within an ag, therefore ag has
 	 * to be aligned at stripe boundary.
 	 */
-	error = xfs_update_alignment(mp, &update_flags);
+	error = xfs_update_alignment(mp);
 	if (error)
 		goto error1;
 
@@ -1137,10 +1135,12 @@
 	}
 
 	/*
-	 * If fs is not mounted readonly, then update the superblock changes.
+	 * If this is a read-only mount defer the superblock updates until
+	 * the next remount into writeable mode.  Otherwise we would never
+	 * perform the update e.g. for the root filesystem.
 	 */
-	if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
-		error = xfs_mount_log_sb(mp, update_flags);
+	if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+		error = xfs_mount_log_sb(mp, mp->m_update_flags);
 		if (error) {
 			cmn_err(CE_WARN, "XFS: failed to write sb changes");
 			goto error4;
@@ -1820,7 +1820,7 @@
  * be altered by the mount options, as well as any potential sb_features2
  * fixup. Only the first superblock is updated.
  */
-STATIC int
+int
 xfs_mount_log_sb(
 	xfs_mount_t	*mp,
 	__int64_t	fields)
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index c1e0284..f5e9937 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -44,9 +44,9 @@
 
 #ifndef __KERNEL__
 
-#define XFS_DADDR_TO_AGNO(mp,d) \
+#define xfs_daddr_to_agno(mp,d) \
 	((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks))
-#define XFS_DADDR_TO_AGBNO(mp,d) \
+#define xfs_daddr_to_agbno(mp,d) \
 	((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks))
 
 #else /* __KERNEL__ */
@@ -327,6 +327,8 @@
 	spinlock_t		m_sync_lock;	/* work item list lock */
 	int			m_sync_seq;	/* sync thread generation no. */
 	wait_queue_head_t	m_wait_single_sync_task;
+	__int64_t		m_update_flags;	/* sb flags we need to update
+						   on the next remount,rw */
 } xfs_mount_t;
 
 /*
@@ -439,7 +441,6 @@
  */
 #define XFS_MFSI_QUIET		0x40	/* Be silent if mount errors found */
 
-#define XFS_DADDR_TO_AGNO(mp,d)         xfs_daddr_to_agno(mp,d)
 static inline xfs_agnumber_t
 xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -448,7 +449,6 @@
 	return (xfs_agnumber_t) ld;
 }
 
-#define XFS_DADDR_TO_AGBNO(mp,d)        xfs_daddr_to_agbno(mp,d)
 static inline xfs_agblock_t
 xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d)
 {
@@ -514,6 +514,7 @@
 			int64_t, int);
 extern int	xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *,
 			uint, int);
+extern int	xfs_mount_log_sb(xfs_mount_t *, __int64_t);
 extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int);
 extern int	xfs_readsb(xfs_mount_t *, int);
 extern void	xfs_freesb(xfs_mount_t *);
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 86471bb..58f85e9 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -147,7 +147,7 @@
 	xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip,
 				inodes, &num_inodes);
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME);
 	cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
 	spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len);
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index edf12c7..c5bb86f 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -120,7 +120,7 @@
 		if ((error = xfs_trans_iget(mp, tp, ino, 0,
 						XFS_ILOCK_EXCL, &ip)))
 			goto error_cancel;
-		XFS_BMAP_INIT(&flist, &firstblock);
+		xfs_bmap_init(&flist, &firstblock);
 		/*
 		 * Allocate blocks to the bitmap file.
 		 */
diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h
index f87db53..f76c003 100644
--- a/fs/xfs/xfs_rw.h
+++ b/fs/xfs/xfs_rw.h
@@ -28,7 +28,6 @@
  * file is a real time file or not, because the bmap code
  * does.
  */
-#define	XFS_FSB_TO_DB(ip,fsb)	xfs_fsb_to_db(ip,fsb)
 static inline xfs_daddr_t
 xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
 {
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index 1ed7191..1b017c6 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -505,7 +505,7 @@
 
 #define	XFS_HDR_BLOCK(mp,d)	((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d))
 #define	XFS_DADDR_TO_FSB(mp,d)	XFS_AGB_TO_FSB(mp, \
-			XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d))
+			xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d))
 #define	XFS_FSB_TO_DADDR(mp,fsbno)	XFS_AGB_TO_DADDR(mp, \
 			XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno))
 
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index f07bf87..0e55c5d 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -862,7 +862,7 @@
 	 * Find the block(s) so we can inval and unmap them.
 	 */
 	done = 0;
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	nmaps = ARRAY_SIZE(mval);
 	if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size),
 			XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps,
@@ -1288,7 +1288,7 @@
 	/*
 	 * Free the inode.
 	 */
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	error = xfs_ifree(tp, ip, &free_list);
 	if (error) {
 		/*
@@ -1461,7 +1461,7 @@
 	xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT);
 	unlock_dp_on_error = B_TRUE;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	ASSERT(ip == NULL);
 
@@ -1879,7 +1879,7 @@
 		}
 	}
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 	error = xfs_dir_removename(tp, dp, name, ip->i_ino,
 					&first_block, &free_list, resblks);
 	if (error) {
@@ -2059,7 +2059,7 @@
 	if (error)
 		goto error_return;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
 					&first_block, &free_list, resblks);
@@ -2231,7 +2231,7 @@
 	xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
 	unlock_dp_on_error = B_FALSE;
 
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino,
 					&first_block, &free_list, resblks ?
@@ -2438,7 +2438,7 @@
 	 * Initialize the bmap freelist prior to calling either
 	 * bmapi or the directory create code.
 	 */
-	XFS_BMAP_INIT(&free_list, &first_block);
+	xfs_bmap_init(&free_list, &first_block);
 
 	/*
 	 * Allocate an inode for the symlink.
@@ -2860,7 +2860,7 @@
 		/*
 		 * Issue the xfs_bmapi() call to allocate the blocks
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bmapi(tp, ip, startoffset_fsb,
 				  allocatesize_fsb, bmapi_flag,
 				  &firstfsb, 0, imapp, &nimaps,
@@ -2980,7 +2980,7 @@
 		XFS_BUF_UNDONE(bp);
 		XFS_BUF_UNWRITE(bp);
 		XFS_BUF_READ(bp);
-		XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock));
+		XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock));
 		xfsbdstrat(mp, bp);
 		error = xfs_iowait(bp);
 		if (error) {
@@ -3186,7 +3186,7 @@
 		/*
 		 * issue the bunmapi() call to free the blocks
 		 */
-		XFS_BMAP_INIT(&free_list, &firstfsb);
+		xfs_bmap_init(&free_list, &firstfsb);
 		error = xfs_bunmapi(tp, ip, startoffset_fsb,
 				  endoffset_fsb - startoffset_fsb,
 				  0, 2, &firstfsb, &free_list, NULL, &done);
diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h
index 9a3274a..937d7c4 100644
--- a/include/asm-generic/bitops/__ffs.h
+++ b/include/asm-generic/bitops/__ffs.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs(unsigned long word)
+static __always_inline unsigned long __ffs(unsigned long word)
 {
 	int num = 0;
 
diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h
index be24465..a60a7cc 100644
--- a/include/asm-generic/bitops/__fls.h
+++ b/include/asm-generic/bitops/__fls.h
@@ -9,7 +9,7 @@
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long __fls(unsigned long word)
+static __always_inline unsigned long __fls(unsigned long word)
 {
 	int num = BITS_PER_LONG - 1;
 
diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h
index 850859b..0576d1f 100644
--- a/include/asm-generic/bitops/fls.h
+++ b/include/asm-generic/bitops/fls.h
@@ -9,7 +9,7 @@
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static inline int fls(int x)
+static __always_inline int fls(int x)
 {
 	int r = 32;
 
diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h
index 86d403f..b097cf8 100644
--- a/include/asm-generic/bitops/fls64.h
+++ b/include/asm-generic/bitops/fls64.h
@@ -15,7 +15,7 @@
  * at position 64.
  */
 #if BITS_PER_LONG == 32
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
 	__u32 h = x >> 32;
 	if (h)
@@ -23,7 +23,7 @@
 	return fls(x);
 }
 #elif BITS_PER_LONG == 64
-static inline int fls64(__u64 x)
+static __always_inline int fls64(__u64 x)
 {
 	if (x == 0)
 		return 0;
diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h
deleted file mode 100644
index 844d6d5..0000000
--- a/include/asm-m68k/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMm68k_AUXVEC_H
-#define __ASMm68k_AUXVEC_H
-
-#endif
diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h
deleted file mode 100644
index d8f9872..0000000
--- a/include/asm-m68k/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h
deleted file mode 100644
index 108d8c4..0000000
--- a/include/asm-m68k/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h
deleted file mode 100644
index 6a332a9..0000000
--- a/include/asm-m68k/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h
deleted file mode 100644
index b279fe0..0000000
--- a/include/asm-m68k/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h
deleted file mode 100644
index 3dd9c0b..0000000
--- a/include/asm-m68k/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h
deleted file mode 100644
index 6ece1b0..0000000
--- a/include/asm-m68k/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h
deleted file mode 100644
index 458c1f7..0000000
--- a/include/asm-m68k/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h
deleted file mode 100644
index ca173e9..0000000
--- a/include/asm-m68k/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_M68K_TOPOLOGY_H
-#define _ASM_M68K_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 47809ac..d54de24 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -528,7 +528,8 @@
  *
  */
 struct drm_mode_config {
-	struct mutex mutex; /* protects configuration and IDR */
+	struct mutex mutex; /* protects configuration (mode lists etc.) */
+	struct mutex idr_mutex; /* for IDR management */
 	struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
 	/* this is limited to one for now */
 	int num_fb;
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 23936b1..af0e01d 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -162,6 +162,13 @@
 	return ERR_PTR(-ENODEV);
 }
 
+static inline struct dentry *debugfs_create_size_t(const char *name, mode_t mode,
+				     struct dentry *parent,
+				     size_t *value)
+{
+	return ERR_PTR(-ENODEV);
+}
+
 static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode,
 						 struct dentry *parent,
 						 u32 *value)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c73f1e2..3e0f64c 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -297,6 +297,11 @@
 	tx->flags |= DMA_CTRL_ACK;
 }
 
+static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx)
+{
+	tx->flags &= ~DMA_CTRL_ACK;
+}
+
 static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx)
 {
 	return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK;
@@ -400,11 +405,16 @@
 enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
 #ifdef CONFIG_DMA_ENGINE
 enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
+void dma_issue_pending_all(void);
 #else
 static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
 {
 	return DMA_SUCCESS;
 }
+static inline void dma_issue_pending_all(void)
+{
+	do { } while (0);
+}
 #endif
 
 /* --- DMA device --- */
@@ -413,7 +423,6 @@
 void dma_async_device_unregister(struct dma_device *device);
 void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
 struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
-void dma_issue_pending_all(void);
 #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
 struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
 void dma_release_channel(struct dma_chan *chan);
diff --git a/include/linux/dmi.h b/include/linux/dmi.h
index 3416190..aea2310 100644
--- a/include/linux/dmi.h
+++ b/include/linux/dmi.h
@@ -38,6 +38,7 @@
 #ifdef CONFIG_DMI
 
 extern int dmi_check_system(const struct dmi_system_id *list);
+const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list);
 extern const char * dmi_get_system_info(int field);
 extern const struct dmi_device * dmi_find_device(int type, const char *name,
 	const struct dmi_device *from);
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 01d67ba..1ffc23b 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -40,9 +40,7 @@
 #define I2C_DRIVERID_SAA7185B	13	/* video encoder		*/
 #define I2C_DRIVERID_SAA7110	22	/* video decoder		*/
 #define I2C_DRIVERID_SAA5249	24	/* SAA5249 and compatibles	*/
-#define I2C_DRIVERID_PCF8583	25	/* real time clock		*/
 #define I2C_DRIVERID_TDA7432	27	/* Stereo sound processor	*/
-#define I2C_DRIVERID_TVMIXER    28      /* Mixer driver for tv cards    */
 #define I2C_DRIVERID_TVAUDIO    29      /* Generic TV sound driver      */
 #define I2C_DRIVERID_TDA9875    32      /* TV sound decoder chip        */
 #define I2C_DRIVERID_BT819	40     /* video decoder			*/
@@ -54,7 +52,6 @@
 #define I2C_DRIVERID_SAA7191	57	/* video decoder		*/
 #define I2C_DRIVERID_INDYCAM	58	/* SGI IndyCam			*/
 #define I2C_DRIVERID_OVCAMCHIP	61	/* OmniVision CMOS image sens.	*/
-#define I2C_DRIVERID_MAX6900	63	/* MAX6900 real-time clock	*/
 #define I2C_DRIVERID_SAA6752HS	67	/* MPEG2 encoder		*/
 #define I2C_DRIVERID_TVEEPROM	68	/* TV EEPROM			*/
 #define I2C_DRIVERID_WM8775	69	/* wm8775 audio processor	*/
@@ -62,23 +59,16 @@
 #define I2C_DRIVERID_CX25840	71	/* cx2584x video encoder	*/
 #define I2C_DRIVERID_SAA7127	72	/* saa7127 video encoder	*/
 #define I2C_DRIVERID_SAA711X	73	/* saa711x video encoders	*/
-#define I2C_DRIVERID_AKITAIOEXP	74	/* IO Expander on Sharp SL-C1000 */
 #define I2C_DRIVERID_INFRARED	75	/* I2C InfraRed on Video boards */
 #define I2C_DRIVERID_TVP5150	76	/* TVP5150 video decoder        */
 #define I2C_DRIVERID_WM8739	77	/* wm8739 audio processor	*/
 #define I2C_DRIVERID_UPD64083	78	/* upd64083 video processor	*/
 #define I2C_DRIVERID_UPD64031A	79	/* upd64031a video processor	*/
 #define I2C_DRIVERID_SAA717X	80	/* saa717x video encoder	*/
-#define I2C_DRIVERID_DS1672	81	/* Dallas/Maxim DS1672 RTC	*/
 #define I2C_DRIVERID_BT866	85	/* Conexant bt866 video encoder */
 #define I2C_DRIVERID_KS0127	86	/* Samsung ks0127 video decoder */
 #define I2C_DRIVERID_TLV320AIC23B 87	/* TI TLV320AIC23B audio codec  */
-#define I2C_DRIVERID_WM8731	89	/* Wolfson WM8731 audio codec */
-#define I2C_DRIVERID_WM8750	90	/* Wolfson WM8750 audio codec */
-#define I2C_DRIVERID_WM8753	91	/* Wolfson WM8753 audio codec */
-#define I2C_DRIVERID_LM4857 	92 	/* LM4857 Audio Amplifier */
 #define I2C_DRIVERID_VP27SMPX	93	/* Panasonic VP27s tuner internal MPX */
-#define I2C_DRIVERID_CS4270	94	/* Cirrus Logic 4270 audio codec */
 #define I2C_DRIVERID_M52790 	95      /* Mitsubishi M52790SP/FP AV switch */
 #define I2C_DRIVERID_CS5345	96	/* cs5345 audio processor	*/
 
@@ -89,74 +79,23 @@
  */
 
 /* --- Bit algorithm adapters						*/
-#define I2C_HW_B_LP		0x010000 /* Parallel port Philips style */
 #define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
-#define I2C_HW_B_VIA		0x010007 /* Via vt82c586b */
-#define I2C_HW_B_HYDRA		0x010008 /* Apple Hydra Mac I/O */
-#define I2C_HW_B_I810		0x01000a /* Intel I810 */
-#define I2C_HW_B_VOO		0x01000b /* 3dfx Voodoo 3 / Banshee */
-#define I2C_HW_B_SCX200		0x01000e /* Nat'l Semi SCx200 I2C */
 #define I2C_HW_B_RIVA		0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_IOC		0x010011 /* IOC bit-wiggling */
-#define I2C_HW_B_IXP2000	0x010016 /* GPIO on IXP2000 systems */
 #define I2C_HW_B_ZR36067	0x010019 /* Zoran-36057/36067 based boards */
-#define I2C_HW_B_PCILYNX	0x01001a /* TI PCILynx I2C adapter */
 #define I2C_HW_B_CX2388x	0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_NVIDIA		0x01001c /* nvidia framebuffer driver */
-#define I2C_HW_B_SAVAGE		0x01001d /* savage framebuffer driver */
-#define I2C_HW_B_RADEON		0x01001e /* radeon framebuffer driver */
 #define I2C_HW_B_EM28XX		0x01001f /* em28xx video capture cards */
 #define I2C_HW_B_CX2341X	0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_INTELFB	0x010021 /* intel framebuffer driver */
 #define I2C_HW_B_CX23885	0x010022 /* conexant 23885 based tv cards (bus1) */
 #define I2C_HW_B_AU0828		0x010023 /* auvitek au0828 usb bridge */
 
-/* --- PCF 8584 based algorithms					*/
-#define I2C_HW_P_ELEK		0x020002 /* Elektor ISA Bus inteface card */
-
-/* --- PCA 9564 based algorithms */
-#define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
-
-/* --- PowerPC on-chip adapters						*/
-#define I2C_HW_OCP		0x120000 /* IBM on-chip I2C adapter */
-
-/* --- Broadcom SiByte adapters						*/
-#define I2C_HW_SIBYTE		0x150000
-
 /* --- SGI adapters							*/
 #define I2C_HW_SGI_VINO		0x160000
 
-/* --- XSCALE on-chip adapters                          */
-#define I2C_HW_IOP3XX		0x140000
-
-/* --- Au1550 PSC adapters adapters					*/
-#define I2C_HW_AU1550_PSC	0x1b0000
-
 /* --- SMBus only adapters						*/
-#define I2C_HW_SMBUS_PIIX4	0x040000
-#define I2C_HW_SMBUS_ALI15X3	0x040001
-#define I2C_HW_SMBUS_VIA2	0x040002
-#define I2C_HW_SMBUS_I801	0x040004
-#define I2C_HW_SMBUS_AMD756	0x040005
-#define I2C_HW_SMBUS_SIS5595	0x040006
-#define I2C_HW_SMBUS_ALI1535	0x040007
-#define I2C_HW_SMBUS_SIS630	0x040008
-#define I2C_HW_SMBUS_SIS96X	0x040009
-#define I2C_HW_SMBUS_AMD8111	0x04000a
-#define I2C_HW_SMBUS_SCX200	0x04000b
-#define I2C_HW_SMBUS_NFORCE2	0x04000c
 #define I2C_HW_SMBUS_W9968CF	0x04000d
 #define I2C_HW_SMBUS_OV511	0x04000e /* OV511(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_OV518	0x04000f /* OV518(+) USB 1.1 webcam ICs */
 #define I2C_HW_SMBUS_CAFE	0x040012 /* Marvell 88ALP01 "CAFE" cam  */
-#define I2C_HW_SMBUS_ALI1563	0x040013
-
-/* --- MCP107 adapter */
-#define I2C_HW_MPC107		0x0d0000
-
-/* --- Embedded adapters */
-#define I2C_HW_MV64XXX		0x190000
-#define I2C_HW_BLACKFIN		0x190001 /* ADI Blackfin I2C TWI driver */
 
 /* --- Miscellaneous adapters */
 #define I2C_HW_SAA7146		0x060000 /* SAA7146 video decoder bus */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 20873d4..fcfbfea 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -151,7 +151,7 @@
 	 * has been dynamically allocated by the driver in the function above,
 	 * it must be freed here.  (LEGACY I2C DRIVERS ONLY)
 	 */
-	int (*detach_client)(struct i2c_client *);
+	int (*detach_client)(struct i2c_client *) __deprecated;
 
 	/* Standard driver model interfaces, for "new style" i2c drivers.
 	 * With the driver model, device enumeration is NEVER done by drivers;
@@ -429,8 +429,10 @@
 	return i2c_register_driver(THIS_MODULE, driver);
 }
 
-extern int i2c_attach_client(struct i2c_client *);
-extern int i2c_detach_client(struct i2c_client *);
+/* These are deprecated, your driver should use the standard .probe()
+ * and .remove() methods instead. */
+extern int __deprecated i2c_attach_client(struct i2c_client *);
+extern int __deprecated i2c_detach_client(struct i2c_client *);
 
 extern struct i2c_client *i2c_use_client(struct i2c_client *client);
 extern void i2c_release_client(struct i2c_client *client);
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 5c34240..60e16a5 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -26,8 +26,6 @@
 
 #include <linux/if.h>
 
-#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
-
 /* Structures and constants associated with the DLCI device driver */
 
 struct dlci_add
@@ -127,6 +125,8 @@
 
 #ifdef __KERNEL__
 
+#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
+
 /* these are the fields of an RFC 1490 header */
 struct frhdr
 {
@@ -190,12 +190,10 @@
    int               buffer;		/* current buffer for S508 firmware */
 };
 
-#endif /* __KERNEL__ */
-
 #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
 
-#ifdef __KERNEL__
 extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
-#endif
+
+#endif /* __KERNEL__ */
 
 #endif
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 2f3c2d4..ea0ea1a 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -48,6 +48,12 @@
 	.posix_timers	 = LIST_HEAD_INIT(sig.posix_timers),		\
 	.cpu_timers	= INIT_CPU_TIMERS(sig.cpu_timers),		\
 	.rlim		= INIT_RLIMITS,					\
+	.cputime	= { .totals = {					\
+		.utime = cputime_zero,					\
+		.stime = cputime_zero,					\
+		.sum_exec_runtime = 0,					\
+		.lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock),	\
+	}, },								\
 }
 
 extern struct nsproxy init_nsproxy;
diff --git a/include/linux/klist.h b/include/linux/klist.h
index d5a27af..e91a4e5 100644
--- a/include/linux/klist.h
+++ b/include/linux/klist.h
@@ -22,7 +22,7 @@
 	struct list_head	k_list;
 	void			(*get)(struct klist_node *);
 	void			(*put)(struct klist_node *);
-};
+} __attribute__ ((aligned (4)));
 
 #define KLIST_INIT(_name, _get, _put)					\
 	{ .k_lock	= __SPIN_LOCK_UNLOCKED(_name.k_lock),		\
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 2c6bd66..bca3ba2 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -187,6 +187,8 @@
 	ATA_FLAG_PIO_POLLING	= (1 << 9), /* use polling PIO if LLD
 					     * doesn't handle PIO interrupts */
 	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */
+	ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */
+	ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */
 	ATA_FLAG_DEBUGMSG	= (1 << 13),
 	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
 	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 97b91d1..fde8667 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -443,6 +443,13 @@
 	struct dmi_strmatch matches[4];
 	void *driver_data;
 };
+/*
+ * struct dmi_device_id appears during expansion of
+ * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it
+ * but this is enough for gcc 3.4.6 to error out:
+ *	error: storage size of '__mod_dmi_device_table' isn't known
+ */
+#define dmi_device_id dmi_system_id
 #endif
 
 #define DMI_MATCH(a, b)	{ a, b }
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 80f8b8b..48890cf 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -117,6 +117,10 @@
 #define PCI_UNKNOWN	((pci_power_t __force) 5)
 #define PCI_POWER_ERROR	((pci_power_t __force) -1)
 
+#define PCI_PM_D2_DELAY	200
+#define PCI_PM_D3_WAIT	10
+#define PCI_PM_BUS_WAIT	50
+
 /** The pci_channel state describes connectivity between the CPU and
  *  the pci device.  If some PCI bus between here and the pci device
  *  has crashed or locked up, this info is reflected here.
@@ -252,6 +256,7 @@
 	unsigned int	ari_enabled:1;	/* ARI forwarding */
 	unsigned int	is_managed:1;
 	unsigned int	is_pcie:1;
+	unsigned int	state_saved:1;
 	pci_dev_flags_t dev_flags;
 	atomic_t	enable_cnt;	/* pci_enable_device has been called */
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d56ad9c..febc10e 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1357,6 +1357,7 @@
 #define PCI_DEVICE_ID_VIA_8783_0	0x3208
 #define PCI_DEVICE_ID_VIA_8237		0x3227
 #define PCI_DEVICE_ID_VIA_8251		0x3287
+#define PCI_DEVICE_ID_VIA_8261		0x3402
 #define PCI_DEVICE_ID_VIA_8237A		0x3337
 #define PCI_DEVICE_ID_VIA_8237S		0x3372
 #define PCI_DEVICE_ID_VIA_SATA_EIDE	0x5324
@@ -1366,10 +1367,13 @@
 #define PCI_DEVICE_ID_VIA_CX700		0x8324
 #define PCI_DEVICE_ID_VIA_CX700_IDE	0x0581
 #define PCI_DEVICE_ID_VIA_VX800		0x8353
+#define PCI_DEVICE_ID_VIA_VX855		0x8409
 #define PCI_DEVICE_ID_VIA_8371_1	0x8391
 #define PCI_DEVICE_ID_VIA_82C598_1	0x8598
 #define PCI_DEVICE_ID_VIA_838X_1	0xB188
 #define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
+#define PCI_DEVICE_ID_VIA_C409_IDE	0XC409
+#define PCI_DEVICE_ID_VIA_ANON		0xFFFF
 
 #define PCI_VENDOR_ID_SIEMENS           0x110A
 #define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index 21b781a..0b35b3a 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -24,10 +24,8 @@
 
 int dquot_initialize(struct inode *inode, int type);
 int dquot_drop(struct inode *inode);
-int dquot_drop_locked(struct inode *inode);
 struct dquot *dqget(struct super_block *sb, unsigned int id, int type);
 void dqput(struct dquot *dquot);
-int dquot_is_cached(struct super_block *sb, unsigned int id, int type);
 int dquot_scan_active(struct super_block *sb,
 		      int (*fn)(struct dquot *dquot, unsigned long priv),
 		      unsigned long priv);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4cae9b8..02e16d2 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -293,6 +293,9 @@
 extern void softlockup_tick(void);
 extern void touch_softlockup_watchdog(void);
 extern void touch_all_softlockup_watchdogs(void);
+extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+				    struct file *filp, void __user *buffer,
+				    size_t *lenp, loff_t *ppos);
 extern unsigned int  softlockup_panic;
 extern unsigned long sysctl_hung_task_check_count;
 extern unsigned long sysctl_hung_task_timeout_secs;
@@ -450,6 +453,7 @@
 	cputime_t utime;
 	cputime_t stime;
 	unsigned long long sum_exec_runtime;
+	spinlock_t lock;
 };
 /* Alternate field names when used to cache expirations. */
 #define prof_exp	stime
@@ -465,7 +469,7 @@
  * used for thread group CPU clock calculations.
  */
 struct thread_group_cputime {
-	struct task_cputime *totals;
+	struct task_cputime totals;
 };
 
 /*
@@ -2180,24 +2184,30 @@
  * Thread group CPU time accounting.
  */
 
-extern int thread_group_cputime_alloc(struct task_struct *);
-extern void thread_group_cputime(struct task_struct *, struct task_cputime *);
+static inline
+void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times)
+{
+	struct task_cputime *totals = &tsk->signal->cputime.totals;
+	unsigned long flags;
+
+	spin_lock_irqsave(&totals->lock, flags);
+	*times = *totals;
+	spin_unlock_irqrestore(&totals->lock, flags);
+}
 
 static inline void thread_group_cputime_init(struct signal_struct *sig)
 {
-	sig->cputime.totals = NULL;
-}
+	sig->cputime.totals = (struct task_cputime){
+		.utime = cputime_zero,
+		.stime = cputime_zero,
+		.sum_exec_runtime = 0,
+	};
 
-static inline int thread_group_cputime_clone_thread(struct task_struct *curr)
-{
-	if (curr->signal->cputime.totals)
-		return 0;
-	return thread_group_cputime_alloc(curr);
+	spin_lock_init(&sig->cputime.totals.lock);
 }
 
 static inline void thread_group_cputime_free(struct signal_struct *sig)
 {
-	free_percpu(sig->cputime.totals);
 }
 
 /*
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 2b409c4..c7d9bb18 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -237,6 +237,7 @@
 extern void hibernate_nvs_free(void);
 extern void hibernate_nvs_save(void);
 extern void hibernate_nvs_restore(void);
+extern bool system_entering_hibernation(void);
 #else /* CONFIG_HIBERNATION */
 static inline int swsusp_page_is_forbidden(struct page *p) { return 0; }
 static inline void swsusp_set_page_free(struct page *p) {}
@@ -252,6 +253,7 @@
 static inline void hibernate_nvs_free(void) {}
 static inline void hibernate_nvs_save(void) {}
 static inline void hibernate_nvs_restore(void) {}
+static inline bool system_entering_hibernation(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 85ee9be..88079fd 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -418,6 +418,8 @@
  * @autosuspend_disabled: autosuspend disabled by the user
  * @autoresume_disabled: autoresume disabled by the user
  * @skip_sys_resume: skip the next system resume
+ * @wusb_dev: if this is a Wireless USB device, link to the WUSB
+ *	specific data for the device.
  *
  * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index ba09fe8..7d38222 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -197,7 +197,9 @@
 #define devdbg(usbnet, fmt, arg...) \
 	printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
 #else
-#define devdbg(usbnet, fmt, arg...) do {} while(0)
+#define devdbg(usbnet, fmt, arg...) \
+	({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \
+		## arg); 0; })
 #endif
 
 #define deverr(usbnet, fmt, arg...) \
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index b362911..3cd51e5 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -118,12 +118,24 @@
 		init_timer(&(_work)->timer);			\
 	} while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer_on_stack(&(_work)->timer);		\
+	} while (0)
+
 #define INIT_DELAYED_WORK_DEFERRABLE(_work, _func)			\
 	do {							\
 		INIT_WORK(&(_work)->work, (_func));		\
 		init_timer_deferrable(&(_work)->timer);		\
 	} while (0)
 
+#define INIT_DELAYED_WORK_ON_STACK(_work, _func)		\
+	do {							\
+		INIT_WORK(&(_work)->work, (_func));		\
+		init_timer_on_stack(&(_work)->timer);		\
+	} while (0)
+
 /**
  * work_pending - Find out whether a work item is currently pending
  * @work: The work item in question
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b3bd00a..559422f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -322,7 +322,6 @@
  * @control: union for control data
  * @status: union for status data
  * @driver_data: array of driver_data pointers
- * @retry_count: number of retries
  * @ampdu_ack_len: number of aggregated frames.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ampdu_ack_map: block ack bit map for the aggregation.
diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h
index b799fb21..2fec3c3 100644
--- a/include/net/sctp/checksum.h
+++ b/include/net/sctp/checksum.h
@@ -79,5 +79,5 @@
 
 static inline __be32 sctp_end_cksum(__be32 crc32)
 {
-	return ~crc32;
+	return (__force __be32)~cpu_to_le32((__force u32)crc32);
 }
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 93a4edb..dfa8049 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -108,7 +108,7 @@
 #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
 	wevent, wflags) \
 {	.id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
-	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \
+	.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \
 	.event = wevent, .event_flags = wflags}
 #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
 	wevent, wflags) \
diff --git a/init/Kconfig b/init/Kconfig
index 2af8382..f068071 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -238,6 +238,98 @@
 	def_bool y
 	depends on AUDITSYSCALL && INOTIFY
 
+menu "RCU Subsystem"
+
+choice
+	prompt "RCU Implementation"
+	default CLASSIC_RCU
+
+config CLASSIC_RCU
+	bool "Classic RCU"
+	help
+	  This option selects the classic RCU implementation that is
+	  designed for best read-side performance on non-realtime
+	  systems.
+
+	  Select this option if you are unsure.
+
+config TREE_RCU
+	bool "Tree-based hierarchical RCU"
+	help
+	  This option selects the RCU implementation that is
+	  designed for very large SMP system with hundreds or
+	  thousands of CPUs.
+
+config PREEMPT_RCU
+	bool "Preemptible RCU"
+	depends on PREEMPT
+	help
+	  This option reduces the latency of the kernel by making certain
+	  RCU sections preemptible. Normally RCU code is non-preemptible, if
+	  this option is selected then read-only RCU sections become
+	  preemptible. This helps latency, but may expose bugs due to
+	  now-naive assumptions about each RCU read-side critical section
+	  remaining on a given CPU through its execution.
+
+endchoice
+
+config RCU_TRACE
+	bool "Enable tracing for RCU"
+	depends on TREE_RCU || PREEMPT_RCU
+	help
+	  This option provides tracing in RCU which presents stats
+	  in debugfs for debugging RCU implementation.
+
+	  Say Y here if you want to enable RCU tracing
+	  Say N if you are unsure.
+
+config RCU_FANOUT
+	int "Tree-based hierarchical RCU fanout value"
+	range 2 64 if 64BIT
+	range 2 32 if !64BIT
+	depends on TREE_RCU
+	default 64 if 64BIT
+	default 32 if !64BIT
+	help
+	  This option controls the fanout of hierarchical implementations
+	  of RCU, allowing RCU to work efficiently on machines with
+	  large numbers of CPUs.  This value must be at least the cube
+	  root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
+	  systems and up to 262,144 for 64-bit systems.
+
+	  Select a specific number if testing RCU itself.
+	  Take the default if unsure.
+
+config RCU_FANOUT_EXACT
+	bool "Disable tree-based hierarchical RCU auto-balancing"
+	depends on TREE_RCU
+	default n
+	help
+	  This option forces use of the exact RCU_FANOUT value specified,
+	  regardless of imbalances in the hierarchy.  This is useful for
+	  testing RCU itself, and might one day be useful on systems with
+	  strong NUMA behavior.
+
+	  Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
+
+	  Say N if unsure.
+
+config TREE_RCU_TRACE
+	def_bool RCU_TRACE && TREE_RCU
+	select DEBUG_FS
+	help
+	  This option provides tracing for the TREE_RCU implementation,
+	  permitting Makefile to trivially select kernel/rcutree_trace.c.
+
+config PREEMPT_RCU_TRACE
+	def_bool RCU_TRACE && PREEMPT_RCU
+	select DEBUG_FS
+	help
+	  This option provides tracing for the PREEMPT_RCU implementation,
+	  permitting Makefile to trivially select kernel/rcupreempt_trace.c.
+
+endmenu # "RCU Subsystem"
+
 config IKCONFIG
 	tristate "Kernel .config support"
 	---help---
@@ -541,6 +633,14 @@
 	  Unless you want to work with an experimental feature
 	  say N here.
 
+config NET_NS
+	bool "Network namespace"
+	default n
+	depends on NAMESPACES && EXPERIMENTAL && NET
+	help
+	  Allow user space to create what appear to be multiple instances
+	  of the network stack.
+
 config BLK_DEV_INITRD
 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
 	depends on BROKEN || !FRV
@@ -625,13 +725,6 @@
 
 	   Say N.
 
-config KALLSYMS_STRIP_GENERATED
-	bool "Strip machine generated symbols from kallsyms"
-	depends on KALLSYMS_ALL
-	default y
-	help
-	  Say N if you want kallsyms to retain even machine generated symbols.
-
 config KALLSYMS_EXTRA_PASS
 	bool "Do an extra kallsyms pass"
 	depends on KALLSYMS
@@ -972,90 +1065,3 @@
 config PREEMPT_NOTIFIERS
 	bool
 
-choice
-	prompt "RCU Implementation"
-	default CLASSIC_RCU
-
-config CLASSIC_RCU
-	bool "Classic RCU"
-	help
-	  This option selects the classic RCU implementation that is
-	  designed for best read-side performance on non-realtime
-	  systems.
-
-	  Select this option if you are unsure.
-
-config TREE_RCU
-	bool "Tree-based hierarchical RCU"
-	help
-	  This option selects the RCU implementation that is
-	  designed for very large SMP system with hundreds or
-	  thousands of CPUs.
-
-config PREEMPT_RCU
-	bool "Preemptible RCU"
-	depends on PREEMPT
-	help
-	  This option reduces the latency of the kernel by making certain
-	  RCU sections preemptible. Normally RCU code is non-preemptible, if
-	  this option is selected then read-only RCU sections become
-	  preemptible. This helps latency, but may expose bugs due to
-	  now-naive assumptions about each RCU read-side critical section
-	  remaining on a given CPU through its execution.
-
-endchoice
-
-config RCU_TRACE
-	bool "Enable tracing for RCU"
-	depends on TREE_RCU || PREEMPT_RCU
-	help
-	  This option provides tracing in RCU which presents stats
-	  in debugfs for debugging RCU implementation.
-
-	  Say Y here if you want to enable RCU tracing
-	  Say N if you are unsure.
-
-config RCU_FANOUT
-	int "Tree-based hierarchical RCU fanout value"
-	range 2 64 if 64BIT
-	range 2 32 if !64BIT
-	depends on TREE_RCU
-	default 64 if 64BIT
-	default 32 if !64BIT
-	help
-	  This option controls the fanout of hierarchical implementations
-	  of RCU, allowing RCU to work efficiently on machines with
-	  large numbers of CPUs.  This value must be at least the cube
-	  root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit
-	  systems and up to 262,144 for 64-bit systems.
-
-	  Select a specific number if testing RCU itself.
-	  Take the default if unsure.
-
-config RCU_FANOUT_EXACT
-	bool "Disable tree-based hierarchical RCU auto-balancing"
-	depends on TREE_RCU
-	default n
-	help
-	  This option forces use of the exact RCU_FANOUT value specified,
-	  regardless of imbalances in the hierarchy.  This is useful for
-	  testing RCU itself, and might one day be useful on systems with
-	  strong NUMA behavior.
-
-	  Without RCU_FANOUT_EXACT, the code will balance the hierarchy.
-
-	  Say N if unsure.
-
-config TREE_RCU_TRACE
-	def_bool RCU_TRACE && TREE_RCU
-	select DEBUG_FS
-	help
-	  This option provides tracing for the TREE_RCU implementation,
-	  permitting Makefile to trivially select kernel/rcutree_trace.c.
-
-config PREEMPT_RCU_TRACE
-	def_bool RCU_TRACE && PREEMPT_RCU
-	select DEBUG_FS
-	help
-	  This option provides tracing for the PREEMPT_RCU implementation,
-	  permitting Makefile to trivially select kernel/rcupreempt_trace.c.
diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c
index 0387074..962a3b5 100644
--- a/kernel/dma-coherent.c
+++ b/kernel/dma-coherent.c
@@ -98,7 +98,7 @@
  * @size:	size of requested memory area
  * @dma_handle:	This will be filled with the correct dma handle
  * @ret:	This pointer will be filled with the virtual address
- * 		to allocated area.
+ *		to allocated area.
  *
  * This function should be only called from per-arch dma_alloc_coherent()
  * to support allocation from per-device coherent memory pools.
@@ -118,31 +118,32 @@
 	mem = dev->dma_mem;
 	if (!mem)
 		return 0;
-	if (unlikely(size > mem->size))
- 		return 0;
+
+	*ret = NULL;
+
+	if (unlikely(size > (mem->size << PAGE_SHIFT)))
+		goto err;
 
 	pageno = bitmap_find_free_region(mem->bitmap, mem->size, order);
-	if (pageno >= 0) {
-		/*
-		 * Memory was found in the per-device arena.
-		 */
-		*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
-		*ret = mem->virt_base + (pageno << PAGE_SHIFT);
-		memset(*ret, 0, size);
-	} else if (mem->flags & DMA_MEMORY_EXCLUSIVE) {
-		/*
-		 * The per-device arena is exhausted and we are not
-		 * permitted to fall back to generic memory.
-		 */
-		*ret = NULL;
-	} else {
-		/*
-		 * The per-device arena is exhausted and we are
-		 * permitted to fall back to generic memory.
-		 */
-		 return 0;
-	}
+	if (unlikely(pageno < 0))
+		goto err;
+
+	/*
+	 * Memory was found in the per-device area.
+	 */
+	*dma_handle = mem->device_base + (pageno << PAGE_SHIFT);
+	*ret = mem->virt_base + (pageno << PAGE_SHIFT);
+	memset(*ret, 0, size);
+
 	return 1;
+
+err:
+	/*
+	 * In the case where the allocation can not be satisfied from the
+	 * per-device area, try to fall back to generic memory if the
+	 * constraints allow it.
+	 */
+	return mem->flags & DMA_MEMORY_EXCLUSIVE;
 }
 EXPORT_SYMBOL(dma_alloc_from_coherent);
 
diff --git a/kernel/fork.c b/kernel/fork.c
index bf0cef8..242a706 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -817,17 +817,17 @@
 static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 {
 	struct signal_struct *sig;
-	int ret;
 
 	if (clone_flags & CLONE_THREAD) {
-		ret = thread_group_cputime_clone_thread(current);
-		if (likely(!ret)) {
-			atomic_inc(&current->signal->count);
-			atomic_inc(&current->signal->live);
-		}
-		return ret;
+		atomic_inc(&current->signal->count);
+		atomic_inc(&current->signal->live);
+		return 0;
 	}
 	sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
+
+	if (sig)
+		posix_cpu_timers_init_group(sig);
+
 	tsk->signal = sig;
 	if (!sig)
 		return -ENOMEM;
@@ -864,8 +864,6 @@
 	memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
 	task_unlock(current->group_leader);
 
-	posix_cpu_timers_init_group(sig);
-
 	acct_init_pacct(&sig->pacct);
 
 	tty_audit_fork(sig);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 2dc30c5..f33afb0 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -614,7 +614,9 @@
  */
 void hres_timers_resume(void)
 {
-	/* Retrigger the CPU local events: */
+	WARN_ONCE(!irqs_disabled(),
+		  KERN_INFO "hres_timers_resume() called with IRQs enabled!");
+
 	retrigger_next_event(NULL);
 }
 
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index c20db0b..3aba8d1 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -39,6 +39,18 @@
 	ack_bad_irq(irq);
 }
 
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+static void __init init_irq_default_affinity(void)
+{
+	alloc_bootmem_cpumask_var(&irq_default_affinity);
+	cpumask_setall(irq_default_affinity);
+}
+#else
+static void __init init_irq_default_affinity(void)
+{
+}
+#endif
+
 /*
  * Linux has a controller-independent interrupt architecture.
  * Every controller has a 'controller-template', that is used
@@ -134,6 +146,8 @@
 	int legacy_count;
 	int i;
 
+	init_irq_default_affinity();
+
 	desc = irq_desc_legacy;
 	legacy_count = ARRAY_SIZE(irq_desc_legacy);
 
@@ -219,6 +233,8 @@
 	int count;
 	int i;
 
+	init_irq_default_affinity();
+
 	desc = irq_desc;
 	count = ARRAY_SIZE(irq_desc);
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index cd0cd8d..291f036 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -15,17 +15,9 @@
 
 #include "internals.h"
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 cpumask_var_t irq_default_affinity;
 
-static int init_irq_default_affinity(void)
-{
-	alloc_cpumask_var(&irq_default_affinity, GFP_KERNEL);
-	cpumask_setall(irq_default_affinity);
-	return 0;
-}
-core_initcall(init_irq_default_affinity);
-
 /**
  *	synchronize_irq - wait for pending IRQ handlers (on other CPUs)
  *	@irq: interrupt number to wait for
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index e694afa..7b8b0f2 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -30,19 +30,20 @@
 #define all_var 0
 #endif
 
-extern const unsigned long kallsyms_addresses[];
-extern const u8 kallsyms_names[];
+/* These will be re-linked against their real values during the second link stage */
+extern const unsigned long kallsyms_addresses[] __attribute__((weak));
+extern const u8 kallsyms_names[] __attribute__((weak));
 
 /* tell the compiler that the count isn't in the small data section if the arch
  * has one (eg: FRV)
  */
 extern const unsigned long kallsyms_num_syms
-	__attribute__((__section__(".rodata")));
+__attribute__((weak, section(".rodata")));
 
-extern const u8 kallsyms_token_table[];
-extern const u16 kallsyms_token_index[];
+extern const u8 kallsyms_token_table[] __attribute__((weak));
+extern const u16 kallsyms_token_index[] __attribute__((weak));
 
-extern const unsigned long kallsyms_markers[];
+extern const unsigned long kallsyms_markers[] __attribute__((weak));
 
 static inline int is_kernel_inittext(unsigned long addr)
 {
@@ -167,6 +168,9 @@
 	unsigned long symbol_start = 0, symbol_end = 0;
 	unsigned long i, low, high, mid;
 
+	/* This kernel should never had been booted. */
+	BUG_ON(!kallsyms_addresses);
+
 	/* do a binary search on the sorted kallsyms_addresses array */
 	low = 0;
 	high = kallsyms_num_syms;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 157de3a..fa07da9 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -10,76 +10,6 @@
 #include <linux/kernel_stat.h>
 
 /*
- * Allocate the thread_group_cputime structure appropriately and fill in the
- * current values of the fields.  Called from copy_signal() via
- * thread_group_cputime_clone_thread() when adding a second or subsequent
- * thread to a thread group.  Assumes interrupts are enabled when called.
- */
-int thread_group_cputime_alloc(struct task_struct *tsk)
-{
-	struct signal_struct *sig = tsk->signal;
-	struct task_cputime *cputime;
-
-	/*
-	 * If we have multiple threads and we don't already have a
-	 * per-CPU task_cputime struct (checked in the caller), allocate
-	 * one and fill it in with the times accumulated so far.  We may
-	 * race with another thread so recheck after we pick up the sighand
-	 * lock.
-	 */
-	cputime = alloc_percpu(struct task_cputime);
-	if (cputime == NULL)
-		return -ENOMEM;
-	spin_lock_irq(&tsk->sighand->siglock);
-	if (sig->cputime.totals) {
-		spin_unlock_irq(&tsk->sighand->siglock);
-		free_percpu(cputime);
-		return 0;
-	}
-	sig->cputime.totals = cputime;
-	cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id());
-	cputime->utime = tsk->utime;
-	cputime->stime = tsk->stime;
-	cputime->sum_exec_runtime = tsk->se.sum_exec_runtime;
-	spin_unlock_irq(&tsk->sighand->siglock);
-	return 0;
-}
-
-/**
- * thread_group_cputime - Sum the thread group time fields across all CPUs.
- *
- * @tsk:	The task we use to identify the thread group.
- * @times:	task_cputime structure in which we return the summed fields.
- *
- * Walk the list of CPUs to sum the per-CPU time fields in the thread group
- * time structure.
- */
-void thread_group_cputime(
-	struct task_struct *tsk,
-	struct task_cputime *times)
-{
-	struct task_cputime *totals, *tot;
-	int i;
-
-	totals = tsk->signal->cputime.totals;
-	if (!totals) {
-		times->utime = tsk->utime;
-		times->stime = tsk->stime;
-		times->sum_exec_runtime = tsk->se.sum_exec_runtime;
-		return;
-	}
-
-	times->stime = times->utime = cputime_zero;
-	times->sum_exec_runtime = 0;
-	for_each_possible_cpu(i) {
-		tot = per_cpu_ptr(totals, i);
-		times->utime = cputime_add(times->utime, tot->utime);
-		times->stime = cputime_add(times->stime, tot->stime);
-		times->sum_exec_runtime += tot->sum_exec_runtime;
-	}
-}
-
-/*
  * Called after updating RLIMIT_CPU to set timer expiration if necessary.
  */
 void update_rlimit_cpu(unsigned long rlim_new)
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 45e8541..432ee57 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -71,6 +71,14 @@
 	mutex_unlock(&pm_mutex);
 }
 
+static bool entering_platform_hibernation;
+
+bool system_entering_hibernation(void)
+{
+	return entering_platform_hibernation;
+}
+EXPORT_SYMBOL(system_entering_hibernation);
+
 #ifdef CONFIG_PM_DEBUG
 static void hibernation_debug_sleep(void)
 {
@@ -411,6 +419,7 @@
 	if (error)
 		goto Close;
 
+	entering_platform_hibernation = true;
 	suspend_console();
 	error = device_suspend(PMSG_HIBERNATE);
 	if (error) {
@@ -445,6 +454,7 @@
  Finish:
 	hibernation_ops->finish();
  Resume_devices:
+	entering_platform_hibernation = false;
 	device_resume(PMSG_RESTORE);
 	resume_console();
  Close:
diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c
index 490934f..bd5a900 100644
--- a/kernel/rcuclassic.c
+++ b/kernel/rcuclassic.c
@@ -716,7 +716,7 @@
 	raise_rcu_softirq();
 }
 
-static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
+static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp,
 						struct rcu_data *rdp)
 {
 	unsigned long flags;
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index f2d8638..b2fd602 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -1314,7 +1314,7 @@
  * access due to the fact that this CPU cannot possibly have any RCU
  * callbacks in flight yet.
  */
-static void
+static void __cpuinit
 rcu_init_percpu_data(int cpu, struct rcu_state *rsp)
 {
 	unsigned long flags;
diff --git a/kernel/relay.c b/kernel/relay.c
index 09ac200..9d79b78 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -663,8 +663,10 @@
 
 	mutex_lock(&relay_channels_mutex);
 	/* Is chan already set up? */
-	if (unlikely(chan->has_base_filename))
+	if (unlikely(chan->has_base_filename)) {
+		mutex_unlock(&relay_channels_mutex);
 		return -EEXIST;
+	}
 	chan->has_base_filename = 1;
 	chan->parent = parent;
 	curr_cpu = get_cpu();
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index f2773b5..8ab0cef 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -296,6 +296,7 @@
 static inline void account_group_user_time(struct task_struct *tsk,
 					   cputime_t cputime)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	/* tsk == current, ensure it is safe to use ->signal */
@@ -303,13 +304,11 @@
 		return;
 
 	sig = tsk->signal;
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->utime = cputime_add(times->utime, cputime);
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->utime = cputime_add(times->utime, cputime);
+	spin_unlock(&times->lock);
 }
 
 /**
@@ -325,6 +324,7 @@
 static inline void account_group_system_time(struct task_struct *tsk,
 					     cputime_t cputime)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	/* tsk == current, ensure it is safe to use ->signal */
@@ -332,13 +332,11 @@
 		return;
 
 	sig = tsk->signal;
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->stime = cputime_add(times->stime, cputime);
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->stime = cputime_add(times->stime, cputime);
+	spin_unlock(&times->lock);
 }
 
 /**
@@ -354,6 +352,7 @@
 static inline void account_group_exec_runtime(struct task_struct *tsk,
 					      unsigned long long ns)
 {
+	struct task_cputime *times;
 	struct signal_struct *sig;
 
 	sig = tsk->signal;
@@ -362,11 +361,9 @@
 	if (unlikely(!sig))
 		return;
 
-	if (sig->cputime.totals) {
-		struct task_cputime *times;
+	times = &sig->cputime.totals;
 
-		times = per_cpu_ptr(sig->cputime.totals, get_cpu());
-		times->sum_exec_runtime += ns;
-		put_cpu_no_resched();
-	}
+	spin_lock(&times->lock);
+	times->sum_exec_runtime += ns;
+	spin_unlock(&times->lock);
 }
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index d9188c6..85d5a24 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -16,6 +16,7 @@
 #include <linux/lockdep.h>
 #include <linux/notifier.h>
 #include <linux/module.h>
+#include <linux/sysctl.h>
 
 #include <asm/irq_regs.h>
 
@@ -88,6 +89,14 @@
 }
 EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
 
+int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
+			     struct file *filp, void __user *buffer,
+			     size_t *lenp, loff_t *ppos)
+{
+	touch_all_softlockup_watchdogs();
+	return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+}
+
 /*
  * This callback runs from the timer interrupt, and checks
  * whether the watchdog thread has hung or not:
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 368d163..790f9d7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -809,7 +809,7 @@
 		.data		= &softlockup_thresh,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= &proc_dosoftlockup_thresh,
 		.strategy	= &sysctl_intvec,
 		.extra1		= &neg_one,
 		.extra2		= &sixty,
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 1b6c05b..d3f1ef4 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -134,7 +134,7 @@
  * value. We do this unconditionally on any cpu, as we don't know whether the
  * cpu, which has the update task assigned is in a long sleep.
  */
-void tick_nohz_update_jiffies(void)
+static void tick_nohz_update_jiffies(void)
 {
 	int cpu = smp_processor_id();
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 2f44583..1f0c509 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -971,6 +971,8 @@
 }
 
 #ifdef CONFIG_SMP
+static struct workqueue_struct *work_on_cpu_wq __read_mostly;
+
 struct work_for_cpu {
 	struct work_struct work;
 	long (*fn)(void *);
@@ -991,8 +993,8 @@
  * @fn: the function to run
  * @arg: the function arg
  *
- * This will return -EINVAL in the cpu is not online, or the return value
- * of @fn otherwise.
+ * This will return the value @fn returns.
+ * It is up to the caller to ensure that the cpu doesn't go offline.
  */
 long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
 {
@@ -1001,14 +1003,8 @@
 	INIT_WORK(&wfc.work, do_work_for_cpu);
 	wfc.fn = fn;
 	wfc.arg = arg;
-	get_online_cpus();
-	if (unlikely(!cpu_online(cpu)))
-		wfc.ret = -EINVAL;
-	else {
-		schedule_work_on(cpu, &wfc.work);
-		flush_work(&wfc.work);
-	}
-	put_online_cpus();
+	queue_work_on(cpu, work_on_cpu_wq, &wfc.work);
+	flush_work(&wfc.work);
 
 	return wfc.ret;
 }
@@ -1025,4 +1021,8 @@
 	hotcpu_notifier(workqueue_cpu_callback, 0);
 	keventd_wq = create_workqueue("events");
 	BUG_ON(!keventd_wq);
+#ifdef CONFIG_SMP
+	work_on_cpu_wq = create_workqueue("work_on_cpu");
+	BUG_ON(!work_on_cpu_wq);
+#endif
 }
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 4c9ae60..29044f5 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -570,6 +570,15 @@
 	  This is a relatively cheap check but if you care about maximum
 	  performance, say N.
 
+#
+# Select this config option from the architecture Kconfig, if it
+# it is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+	bool
+	help
+
 config FRAME_POINTER
 	bool "Compile the kernel with frame pointers"
 	depends on DEBUG_KERNEL && \
@@ -633,19 +642,6 @@
 
 config RCU_CPU_STALL_DETECTOR
 	bool "Check for stalled CPUs delaying RCU grace periods"
-	depends on CLASSIC_RCU
-	default n
-	help
-	  This option causes RCU to printk information on which
-	  CPUs are delaying the current grace period, but only when
-	  the grace period extends for excessive time periods.
-
-	  Say Y if you want RCU to perform such checks.
-
-	  Say N if you are unsure.
-
-config RCU_CPU_STALL_DETECTOR
-	bool "Check for stalled CPUs delaying RCU grace periods"
 	depends on CLASSIC_RCU || TREE_RCU
 	default n
 	help
diff --git a/mm/nommu.c b/mm/nommu.c
index 8cee8c8..0c3e7d2 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -10,7 +10,7 @@
  *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
  *  Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
  *  Copyright (c) 2002      Greg Ungerer <gerg@snapgear.com>
- *  Copyright (c) 2007-2008 Paul Mundt <lethal@linux-sh.org>
+ *  Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
  */
 
 #include <linux/module.h>
@@ -394,6 +394,24 @@
 }
 EXPORT_SYMBOL(vunmap);
 
+void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
+{
+	BUG();
+	return NULL;
+}
+EXPORT_SYMBOL(vm_map_ram);
+
+void vm_unmap_ram(const void *mem, unsigned int count)
+{
+	BUG();
+}
+EXPORT_SYMBOL(vm_unmap_ram);
+
+void vm_unmap_aliases(void)
+{
+}
+EXPORT_SYMBOL_GPL(vm_unmap_aliases);
+
 /*
  * Implement a stub for vmalloc_sync_all() if the architecture chose not to
  * have one.
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 6c13239..e9db889 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -62,13 +62,13 @@
 {
 	return vlan_dev_info(dev)->real_dev;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_real_dev);
+EXPORT_SYMBOL(vlan_dev_real_dev);
 
 u16 vlan_dev_vlan_id(const struct net_device *dev)
 {
 	return vlan_dev_info(dev)->vlan_id;
 }
-EXPORT_SYMBOL_GPL(vlan_dev_vlan_id);
+EXPORT_SYMBOL(vlan_dev_vlan_id);
 
 static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
 			   unsigned int vlan_tci, struct sk_buff *skb)
diff --git a/net/9p/client.c b/net/9p/client.c
index 821f1ec..1eb580c 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -618,7 +618,7 @@
 		return ERR_PTR(-ENOMEM);
 
 	ret = p9_idpool_get(clnt->fidpool);
-	if (fid->fid < 0) {
+	if (ret < 0) {
 		ret = -ENOSPC;
 		goto error;
 	}
diff --git a/net/Kconfig b/net/Kconfig
index bf27760..cdb8fde 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -24,14 +24,6 @@
 
 menu "Networking options"
 
-config NET_NS
-	bool "Network namespace support"
-	default n
-	depends on EXPERIMENTAL && NAMESPACES
-	help
-	  Allow user space to create what appear to be multiple instances
-	  of the network stack.
-
 config COMPAT_NET_DEV_OPS
        def_bool y
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 8d67597..5379b0c 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1534,7 +1534,19 @@
 	skb->mac_len = skb->network_header - skb->mac_header;
 	__skb_pull(skb, skb->mac_len);
 
-	if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) {
+	if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
+		struct net_device *dev = skb->dev;
+		struct ethtool_drvinfo info = {};
+
+		if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo)
+			dev->ethtool_ops->get_drvinfo(dev, &info);
+
+		WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d "
+			"ip_summed=%d",
+		     info.driver, dev ? dev->features : 0L,
+		     skb->sk ? skb->sk->sk_route_caps : 0L,
+		     skb->len, skb->data_len, skb->ip_summed);
+
 		if (skb_header_cloned(skb) &&
 		    (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
 			return ERR_PTR(err);
@@ -2524,6 +2536,7 @@
 
 	if (!pskb_may_pull(skb, ETH_HLEN)) {
 		napi_reuse_skb(napi, skb);
+		skb = NULL;
 		goto out;
 	}
 
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 55cffad..55151fa 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -341,8 +341,8 @@
 	rv = register_pernet_operations(first_device, ops);
 	if (rv < 0)
 		ida_remove(&net_generic_ids, *id);
-	mutex_unlock(&net_mutex);
 out:
+	mutex_unlock(&net_mutex);
 	return rv;
 }
 EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 65eac77..2e5f2ca 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -73,17 +73,13 @@
 static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
 				  struct pipe_buffer *buf)
 {
-	struct sk_buff *skb = (struct sk_buff *) buf->private;
-
-	kfree_skb(skb);
+	put_page(buf->page);
 }
 
 static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
 				struct pipe_buffer *buf)
 {
-	struct sk_buff *skb = (struct sk_buff *) buf->private;
-
-	skb_get(skb);
+	get_page(buf->page);
 }
 
 static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
@@ -1334,9 +1330,19 @@
  */
 static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
 {
-	struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private;
+	put_page(spd->pages[i]);
+}
 
-	kfree_skb(skb);
+static inline struct page *linear_to_page(struct page *page, unsigned int len,
+					  unsigned int offset)
+{
+	struct page *p = alloc_pages(GFP_KERNEL, 0);
+
+	if (!p)
+		return NULL;
+	memcpy(page_address(p) + offset, page_address(page) + offset, len);
+
+	return p;
 }
 
 /*
@@ -1344,16 +1350,23 @@
  */
 static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
 				unsigned int len, unsigned int offset,
-				struct sk_buff *skb)
+				struct sk_buff *skb, int linear)
 {
 	if (unlikely(spd->nr_pages == PIPE_BUFFERS))
 		return 1;
 
+	if (linear) {
+		page = linear_to_page(page, len, offset);
+		if (!page)
+			return 1;
+	} else
+		get_page(page);
+
 	spd->pages[spd->nr_pages] = page;
 	spd->partial[spd->nr_pages].len = len;
 	spd->partial[spd->nr_pages].offset = offset;
-	spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb);
 	spd->nr_pages++;
+
 	return 0;
 }
 
@@ -1369,7 +1382,7 @@
 static inline int __splice_segment(struct page *page, unsigned int poff,
 				   unsigned int plen, unsigned int *off,
 				   unsigned int *len, struct sk_buff *skb,
-				   struct splice_pipe_desc *spd)
+				   struct splice_pipe_desc *spd, int linear)
 {
 	if (!*len)
 		return 1;
@@ -1392,7 +1405,7 @@
 		/* the linear region may spread across several pages  */
 		flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
 
-		if (spd_fill_page(spd, page, flen, poff, skb))
+		if (spd_fill_page(spd, page, flen, poff, skb, linear))
 			return 1;
 
 		__segment_seek(&page, &poff, &plen, flen);
@@ -1419,7 +1432,7 @@
 	if (__splice_segment(virt_to_page(skb->data),
 			     (unsigned long) skb->data & (PAGE_SIZE - 1),
 			     skb_headlen(skb),
-			     offset, len, skb, spd))
+			     offset, len, skb, spd, 1))
 		return 1;
 
 	/*
@@ -1429,7 +1442,7 @@
 		const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
 
 		if (__splice_segment(f->page, f->page_offset, f->size,
-				     offset, len, skb, spd))
+				     offset, len, skb, spd, 0))
 			return 1;
 	}
 
@@ -1442,7 +1455,7 @@
  * the frag list, if such a thing exists. We'd probably need to recurse to
  * handle that cleanly.
  */
-int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
+int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
 		    struct pipe_inode_info *pipe, unsigned int tlen,
 		    unsigned int flags)
 {
@@ -1455,16 +1468,6 @@
 		.ops = &sock_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
-	struct sk_buff *skb;
-
-	/*
-	 * I'd love to avoid the clone here, but tcp_read_sock()
-	 * ignores reference counts and unconditonally kills the sk_buff
-	 * on return from the actor.
-	 */
-	skb = skb_clone(__skb, GFP_KERNEL);
-	if (unlikely(!skb))
-		return -ENOMEM;
 
 	/*
 	 * __skb_splice_bits() only fails if the output has no room left,
@@ -1488,15 +1491,9 @@
 	}
 
 done:
-	/*
-	 * drop our reference to the clone, the pipe consumption will
-	 * drop the rest.
-	 */
-	kfree_skb(skb);
-
 	if (spd.nr_pages) {
+		struct sock *sk = skb->sk;
 		int ret;
-		struct sock *sk = __skb->sk;
 
 		/*
 		 * Drop the socket lock, otherwise we have reverse
@@ -2588,8 +2585,9 @@
 	struct sk_buff *nskb;
 	unsigned int headroom;
 	unsigned int hlen = p->data - skb_mac_header(p);
+	unsigned int len = skb->len;
 
-	if (hlen + p->len + skb->len >= 65536)
+	if (hlen + p->len + len >= 65536)
 		return -E2BIG;
 
 	if (skb_shinfo(p)->frag_list)
@@ -2651,9 +2649,9 @@
 
 done:
 	NAPI_GRO_CB(p)->count++;
-	p->data_len += skb->len;
-	p->truesize += skb->len;
-	p->len += skb->len;
+	p->data_len += len;
+	p->truesize += len;
+	p->len += len;
 
 	NAPI_GRO_CB(skb)->same_flow = 1;
 	return 0;
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 94f74f5..c802bc1 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -797,6 +797,7 @@
 	unsigned int nlen;
 	int flush = 1;
 	int proto;
+	__wsum csum;
 
 	if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
 		goto out;
@@ -808,6 +809,7 @@
 
 	rcu_read_lock();
 	proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr);
+	iph = ipv6_hdr(skb);
 	IPV6_GRO_CB(skb)->proto = proto;
 	ops = rcu_dereference(inet6_protos[proto]);
 	if (!ops || !ops->gro_receive)
@@ -839,8 +841,13 @@
 
 	NAPI_GRO_CB(skb)->flush |= flush;
 
+	csum = skb->csum;
+	skb_postpull_rcsum(skb, iph, skb_network_header_len(skb));
+
 	pp = ops->gro_receive(head, skb);
 
+	skb->csum = csum;
+
 out_unlock:
 	rcu_read_unlock();
 
diff --git a/net/key/af_key.c b/net/key/af_key.c
index f8bd8df..7dcbde3 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1285,6 +1285,7 @@
 				ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1];
 			natt->encap_dport = n_port->sadb_x_nat_t_port_port;
 		}
+		memset(&natt->encap_oa, 0, sizeof(natt->encap_oa));
 	}
 
 	err = xfrm_init_state(x);
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 5ba721b..2b890af 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -620,8 +620,8 @@
 	if (use_short_slot != bss_conf->use_short_slot) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 		if (net_ratelimit()) {
-			printk(KERN_DEBUG "%s: switched to %s slot"
-			       " (BSSID=%s)\n",
+			printk(KERN_DEBUG "%s: switched to %s slot time"
+			       " (BSSID=%pM)\n",
 			       sdata->dev->name,
 			       use_short_slot ? "short" : "long",
 			       ifsta->bssid);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index dc2606d..e49a5b9 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -195,7 +195,6 @@
  * @tx_packets: number of RX/TX MSDUs
  * @tx_bytes: number of bytes transmitted to this STA
  * @tx_fragments: number of transmitted MPDUs
- * @last_txrate: description of the last used transmit rate
  * @tid_seq: per-TID sequence numbers for sending to this STA
  * @ampdu_mlme: A-MPDU state machine state
  * @timer_to_tid: identity mapping to ID timers
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index a4af3a124..4278e54 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1307,8 +1307,10 @@
 		if (is_multicast_ether_addr(hdr->addr3))
 			memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
 		else
-			if (mesh_nexthop_lookup(skb, osdata))
-				return  0;
+			if (mesh_nexthop_lookup(skb, osdata)) {
+				dev_put(odev);
+				return 0;
+			}
 		if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
 			IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
 							    fwded_frames);
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 3dddec6..c32a7e8 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -831,13 +831,16 @@
 	if (!parse_nat_setup) {
 #ifdef CONFIG_MODULES
 		rcu_read_unlock();
+		spin_unlock_bh(&nf_conntrack_lock);
 		nfnl_unlock();
 		if (request_module("nf-nat-ipv4") < 0) {
 			nfnl_lock();
+			spin_lock_bh(&nf_conntrack_lock);
 			rcu_read_lock();
 			return -EOPNOTSUPP;
 		}
 		nfnl_lock();
+		spin_lock_bh(&nf_conntrack_lock);
 		rcu_read_lock();
 		if (nfnetlink_parse_nat_setup_hook)
 			return -EAGAIN;
diff --git a/net/sctp/input.c b/net/sctp/input.c
index bf612d9..2e4a864 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -249,6 +249,19 @@
 	 */
 	sctp_bh_lock_sock(sk);
 
+	if (sk != rcvr->sk) {
+		/* Our cached sk is different from the rcvr->sk.  This is
+		 * because migrate()/accept() may have moved the association
+		 * to a new socket and released all the sockets.  So now we
+		 * are holding a lock on the old socket while the user may
+		 * be doing something with the new socket.  Switch our veiw
+		 * of the current sk.
+		 */
+		sctp_bh_unlock_sock(sk);
+		sk = rcvr->sk;
+		sctp_bh_lock_sock(sk);
+	}
+
 	if (sock_owned_by_user(sk)) {
 		SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
 		sctp_add_backlog(sk, skb);
diff --git a/net/sctp/output.c b/net/sctp/output.c
index c3f417f..7363935 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -324,14 +324,16 @@
 	switch (chunk->chunk_hdr->type) {
 	    case SCTP_CID_DATA:
 		retval = sctp_packet_append_data(packet, chunk);
+		if (SCTP_XMIT_OK != retval)
+			goto finish;
 		/* Disallow SACK bundling after DATA. */
 		packet->has_sack = 1;
 		/* Disallow AUTH bundling after DATA */
 		packet->has_auth = 1;
 		/* Let it be knows that packet has DATA in it */
 		packet->has_data = 1;
-		if (SCTP_XMIT_OK != retval)
-			goto finish;
+		/* timestamp the chunk for rtx purposes */
+		chunk->sent_at = jiffies;
 		break;
 	    case SCTP_CID_COOKIE_ECHO:
 		packet->has_cookie_echo = 1;
@@ -470,7 +472,6 @@
 			} else
 				chunk->resent = 1;
 
-			chunk->sent_at = jiffies;
 			has_data = 1;
 		}
 
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 247ebc9..bc411c8 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -929,7 +929,6 @@
 		}
 
 		/* Finally, transmit new packets.  */
-		start_timer = 0;
 		while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
 			/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
 			 * stream identifier.
@@ -1028,7 +1027,7 @@
 			list_add_tail(&chunk->transmitted_list,
 				      &transport->transmitted);
 
-			sctp_transport_reset_timers(transport, start_timer-1);
+			sctp_transport_reset_timers(transport, 0);
 
 			q->empty = 0;
 
diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig
new file mode 100644
index 0000000..dcef600
--- /dev/null
+++ b/net/sunrpc/Kconfig
@@ -0,0 +1,78 @@
+config SUNRPC
+	tristate
+
+config SUNRPC_GSS
+	tristate
+
+config SUNRPC_XPRT_RDMA
+	tristate
+	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+	default SUNRPC && INFINIBAND
+	help
+	  This option allows the NFS client and server to support
+	  an RDMA-enabled transport.
+
+	  To compile RPC client RDMA transport support as a module,
+	  choose M here: the module will be called xprtrdma.
+
+	  If unsure, say N.
+
+config SUNRPC_REGISTER_V4
+	bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	default n
+	help
+	  Sun added support for registering RPC services at an IPv6
+	  address by creating two new versions of the rpcbind protocol
+	  (RFC 1833).
+
+	  This option enables support in the kernel RPC server for
+	  registering kernel RPC services via version 4 of the rpcbind
+	  protocol.  If you enable this option, you must run a portmapper
+	  daemon that supports rpcbind protocol version 4.
+
+	  Serving NFS over IPv6 from knfsd (the kernel's NFS server)
+	  requires that you enable this option and use a portmapper that
+	  supports rpcbind version 4.
+
+	  If unsure, say N to get traditional behavior (register kernel
+	  RPC services using only rpcbind version 2).  Distributions
+	  using the legacy Linux portmapper daemon must say N here.
+
+config RPCSEC_GSS_KRB5
+	tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	select SUNRPC_GSS
+	select CRYPTO
+	select CRYPTO_MD5
+	select CRYPTO_DES
+	select CRYPTO_CBC
+	help
+	  Choose Y here to enable Secure RPC using the Kerberos version 5
+	  GSS-API mechanism (RFC 1964).
+
+	  Secure RPC calls with Kerberos require an auxiliary user-space
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.  In addition, user-space
+	  Kerberos support should be installed.
+
+	  If unsure, say N.
+
+config RPCSEC_GSS_SPKM3
+	tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
+	depends on SUNRPC && EXPERIMENTAL
+	select SUNRPC_GSS
+	select CRYPTO
+	select CRYPTO_MD5
+	select CRYPTO_DES
+	select CRYPTO_CAST5
+	select CRYPTO_CBC
+	help
+	  Choose Y here to enable Secure RPC using the SPKM3 public key
+	  GSS-API mechansim (RFC 2025).
+
+	  Secure RPC calls with SPKM3 require an auxiliary userspace
+	  daemon which may be found in the Linux nfs-utils package
+	  available from http://linux-nfs.org/.
+
+	  If unsure, say N.
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 4f87753..bc494ce 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -421,6 +421,31 @@
 	return 0;
 }
 
+/**
+ * freq_in_rule_band - tells us if a frequency is in a frequency band
+ * @freq_range: frequency rule we want to query
+ * @freq_khz: frequency we are inquiring about
+ *
+ * This lets us know if a specific frequency rule is or is not relevant to
+ * a specific frequency's band. Bands are device specific and artificial
+ * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
+ * safe for now to assume that a frequency rule should not be part of a
+ * frequency's band if the start freq or end freq are off by more than 2 GHz.
+ * This resolution can be lowered and should be considered as we add
+ * regulatory rule support for other "bands".
+ **/
+static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
+	u32 freq_khz)
+{
+#define ONE_GHZ_IN_KHZ	1000000
+	if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+		return true;
+	if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
+		return true;
+	return false;
+#undef ONE_GHZ_IN_KHZ
+}
+
 /* Converts a country IE to a regulatory domain. A regulatory domain
  * structure has a lot of information which the IE doesn't yet have,
  * so for the other values we use upper max values as we will intersect
@@ -538,6 +563,7 @@
 
 	/* This time around we fill in the rd */
 	while (country_ie_len >= 3) {
+		int end_channel = 0;
 		struct ieee80211_country_ie_triplet *triplet =
 			(struct ieee80211_country_ie_triplet *) country_ie;
 		struct ieee80211_reg_rule *reg_rule = NULL;
@@ -559,6 +585,23 @@
 
 		reg_rule->flags = flags;
 
+		/* 2 GHz */
+		if (triplet->chans.first_channel <= 14)
+			end_channel = triplet->chans.first_channel +
+				triplet->chans.num_channels;
+		else
+			/*
+			 * 5 GHz -- For example in country IEs if the first
+			 * channel given is 36 and the number of channels is 4
+			 * then the individual channel numbers defined for the
+			 * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+			 * and not 36, 37, 38, 39.
+			 *
+			 * See: http://tinyurl.com/11d-clarification
+			 */
+			end_channel =  triplet->chans.first_channel +
+				(4 * (triplet->chans.num_channels - 1));
+
 		/* The +10 is since the regulatory domain expects
 		 * the actual band edge, not the center of freq for
 		 * its start and end freqs, assuming 20 MHz bandwidth on
@@ -568,8 +611,7 @@
 				triplet->chans.first_channel) - 10);
 		freq_range->end_freq_khz =
 			MHZ_TO_KHZ(ieee80211_channel_to_frequency(
-				triplet->chans.first_channel +
-					triplet->chans.num_channels) + 10);
+				end_channel) + 10);
 
 		/* Large arbitrary values, we intersect later */
 		/* Increment this if we ever support >= 40 MHz channels
@@ -748,12 +790,23 @@
  * 	this value to the maximum allowed bandwidth.
  * @reg_rule: the regulatory rule which we have for this frequency
  *
- * Use this function to get the regulatory rule for a specific frequency.
+ * Use this function to get the regulatory rule for a specific frequency on
+ * a given wireless device. If the device has a specific regulatory domain
+ * it wants to follow we respect that unless a country IE has been received
+ * and processed already.
+ *
+ * Returns 0 if it was able to find a valid regulatory rule which does
+ * apply to the given center_freq otherwise it returns non-zero. It will
+ * also return -ERANGE if we determine the given center_freq does not even have
+ * a regulatory rule for a frequency range in the center_freq's band. See
+ * freq_in_rule_band() for our current definition of a band -- this is purely
+ * subjective and right now its 802.11 specific.
  */
 static int freq_reg_info(u32 center_freq, u32 *bandwidth,
 			 const struct ieee80211_reg_rule **reg_rule)
 {
 	int i;
+	bool band_rule_found = false;
 	u32 max_bandwidth = 0;
 
 	if (!cfg80211_regdomain)
@@ -767,7 +820,15 @@
 		rr = &cfg80211_regdomain->reg_rules[i];
 		fr = &rr->freq_range;
 		pr = &rr->power_rule;
+
+		/* We only need to know if one frequency rule was
+		 * was in center_freq's band, that's enough, so lets
+		 * not overwrite it once found */
+		if (!band_rule_found)
+			band_rule_found = freq_in_rule_band(fr, center_freq);
+
 		max_bandwidth = freq_max_bandwidth(fr, center_freq);
+
 		if (max_bandwidth && *bandwidth <= max_bandwidth) {
 			*reg_rule = rr;
 			*bandwidth = max_bandwidth;
@@ -775,23 +836,64 @@
 		}
 	}
 
+	if (!band_rule_found)
+		return -ERANGE;
+
 	return !max_bandwidth;
 }
 
-static void handle_channel(struct ieee80211_channel *chan)
+static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
+			   unsigned int chan_idx)
 {
 	int r;
-	u32 flags = chan->orig_flags;
+	u32 flags;
 	u32 max_bandwidth = 0;
 	const struct ieee80211_reg_rule *reg_rule = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *chan;
+
+	sband = wiphy->bands[band];
+	BUG_ON(chan_idx >= sband->n_channels);
+	chan = &sband->channels[chan_idx];
+
+	flags = chan->orig_flags;
 
 	r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq),
 		&max_bandwidth, &reg_rule);
 
 	if (r) {
-		flags |= IEEE80211_CHAN_DISABLED;
-		chan->flags = flags;
+		/* This means no regulatory rule was found in the country IE
+		 * with a frequency range on the center_freq's band, since
+		 * IEEE-802.11 allows for a country IE to have a subset of the
+		 * regulatory information provided in a country we ignore
+		 * disabling the channel unless at least one reg rule was
+		 * found on the center_freq's band. For details see this
+		 * clarification:
+		 *
+		 * http://tinyurl.com/11d-clarification
+		 */
+		if (r == -ERANGE &&
+		    last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
+#ifdef CONFIG_CFG80211_REG_DEBUG
+			printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
+				"intact on %s - no rule found in band on "
+				"Country IE\n",
+				chan->center_freq, wiphy_name(wiphy));
+#endif
+		} else {
+		/* In this case we know the country IE has at least one reg rule
+		 * for the band so we respect its band definitions */
+#ifdef CONFIG_CFG80211_REG_DEBUG
+			if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
+				printk(KERN_DEBUG "cfg80211: Disabling "
+					"channel %d MHz on %s due to "
+					"Country IE\n",
+					chan->center_freq, wiphy_name(wiphy));
+#endif
+			flags |= IEEE80211_CHAN_DISABLED;
+			chan->flags = flags;
+		}
 		return;
 	}
 
@@ -808,12 +910,16 @@
 		chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
 }
 
-static void handle_band(struct ieee80211_supported_band *sband)
+static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
 {
-	int i;
+	unsigned int i;
+	struct ieee80211_supported_band *sband;
+
+	BUG_ON(!wiphy->bands[band]);
+	sband = wiphy->bands[band];
 
 	for (i = 0; i < sband->n_channels; i++)
-		handle_channel(&sband->channels[i]);
+		handle_channel(wiphy, band, i);
 }
 
 static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby)
@@ -840,7 +946,7 @@
 	enum ieee80211_band band;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		if (wiphy->bands[band])
-			handle_band(wiphy->bands[band]);
+			handle_band(wiphy, band);
 		if (wiphy->reg_notifier)
 			wiphy->reg_notifier(wiphy, setby);
 	}
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 7877e797..b95a2d6 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1914,17 +1914,10 @@
 }
 #endif
 
-/* For the xfrm_usersa_info cases we have to work around some 32-bit vs.
- * 64-bit compatability issues.  On 32-bit the structure is 220 bytes, but
- * for 64-bit it gets padded out to 224 bytes.  Those bytes are just
- * padding and don't have any content we care about.  Therefore as long
- * as we have enough bytes for the content we can make both cases work.
- */
-
 #define XMSGSIZE(type) sizeof(struct type)
 
 static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
-	[XFRM_MSG_NEWSA       - XFRM_MSG_BASE] = 220, /* see above */
+	[XFRM_MSG_NEWSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
 	[XFRM_MSG_DELSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
 	[XFRM_MSG_GETSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
 	[XFRM_MSG_NEWPOLICY   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
@@ -1934,7 +1927,7 @@
 	[XFRM_MSG_ACQUIRE     - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire),
 	[XFRM_MSG_EXPIRE      - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire),
 	[XFRM_MSG_UPDPOLICY   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
-	[XFRM_MSG_UPDSA       - XFRM_MSG_BASE] = 220, /* see above */
+	[XFRM_MSG_UPDSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
 	[XFRM_MSG_POLEXPIRE   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire),
 	[XFRM_MSG_FLUSHSA     - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush),
 	[XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0,
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 5d90030..c7de8b3 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -151,16 +151,16 @@
 $(obj)/%.i: $(src)/%.c FORCE
 	$(call if_changed_dep,cc_i_c)
 
-cmd_genksyms =                                                              \
+cmd_gensymtypes =                                                           \
     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
-    $(GENKSYMS) -T $@ -A -a $(ARCH)                                         \
+    $(GENKSYMS) -T $@ -a $(ARCH)                                            \
      $(if $(KBUILD_PRESERVE),-p)                                            \
      $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null)))
 
 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
 cmd_cc_symtypes_c =                                                         \
     set -e;                                                                 \
-    $(call cmd_genksyms, true) >/dev/null;                                  \
+    $(call cmd_gensymtypes, true) >/dev/null;                               \
     test -s $@ || rm -f $@
 
 $(obj)/%.symtypes : $(src)/%.c FORCE
@@ -177,38 +177,28 @@
 
 else
 # When module versioning is enabled the following steps are executed:
-# o compile a .tmp_<file>.s from <file>.c
-# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does
-#   not export symbols, we just assemble .tmp_<file>.s to <file>.o and
+# o compile a .tmp_<file>.o from <file>.c
+# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
+#   not export symbols, we just rename .tmp_<file>.o to <file>.o and
 #   are done.
 # o otherwise, we calculate symbol versions using the good old
 #   genksyms on the preprocessed source and postprocess them in a way
-#   that they are usable as assembly source
-# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives
-#   defining the actual values of __crc_*, followed by objcopy-ing them
-#   to force these symbols to be local to permit stripping them later.
-s_file = $(@D)/.tmp_$(@F:.o=.s)
-v_file = $(@D)/.tmp_$(@F:.o=.v)
-tmp_o_file = $(@D)/.tmp_$(@F)
-no_g_c_flags = $(filter-out -g%,$(c_flags))
+#   that they are usable as a linker script
+# o generate <file>.o from .tmp_<file>.o using the linker to
+#   replace the unresolved symbols __crc_exported_symbol with
+#   the actual value of the checksum generated by genksyms
 
-cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $<
-
+cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
 cmd_modversions =							\
-	if grep -q __ksymtab $(s_file); then				\
-		if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \
-		   && $(CC) $(no_g_c_flags) -c -Wa,$(v_file)		\
-			    -o $(tmp_o_file) $(s_file)			\
-		   && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w		\
-				 $(tmp_o_file) $@;			\
-		then							\
-			: ;						\
-		else							\
-			rm -f $@; exit 1;				\
-		fi;							\
+	if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then	\
+		$(call cmd_gensymtypes, $(KBUILD_SYMTYPES))		\
+		    > $(@D)/.tmp_$(@F:.o=.ver);				\
+									\
+		$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) 		\
+			-T $(@D)/.tmp_$(@F:.o=.ver);			\
+		rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);	\
 	else								\
-		rm -f $(v_file);					\
-		$(CC) $(no_g_c_flags) -c -o $@ $(s_file);		\
+		mv -f $(@D)/.tmp_$(@F) $@;				\
 	fi;
 endif
 
@@ -225,12 +215,7 @@
 	$(cmd_record_mcount)						  \
 	scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
 	                                              $(dot-target).tmp;  \
-	if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then				  \
-		echo >> $(dot-target).tmp;				  \
-		echo '$@: $(GENKSYMS)' >> $(dot-target).tmp;		  \
-		echo '$(GENKSYMS):: ;' >> $(dot-target).tmp;		  \
-	fi;								  \
-	rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?);			  \
+	rm -f $(depfile);						  \
 	mv -f $(dot-target).tmp $(dot-target).cmd
 endef
 
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index a5122dc..efa5d94 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -17,8 +17,7 @@
 	@:
 
 quiet_cmd_modules_install = INSTALL $@
-      cmd_modules_install = mkdir -p $(2); \
-			    $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2)
+      cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@)
 
 # Modules built outside the kernel source tree go into extra by default
 INSTALL_MOD_DIR ?= extra
diff --git a/scripts/config b/scripts/config
index 68b9761..db6084b 100755
--- a/scripts/config
+++ b/scripts/config
@@ -60,6 +60,10 @@
 	FN=.config
 fi
 
+if [ "$1" = "" ] ; then
+	usage
+fi
+
 while [ "$1" != "" ] ; do
 	CMD="$1"
 	shift
diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c
index f8bb4ca..3a8297b 100644
--- a/scripts/genksyms/genksyms.c
+++ b/scripts/genksyms/genksyms.c
@@ -43,7 +43,7 @@
 char *cur_filename;
 
 static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types,
-	   flag_preserve, flag_warnings, flag_asm;
+	   flag_preserve, flag_warnings;
 static const char *arch = "";
 static const char *mod_prefix = "";
 
@@ -610,11 +610,8 @@
 		if (flag_dump_defs)
 			fputs(">\n", debugfile);
 
-		/* Used as assembly source or a linker script. */
-		printf(flag_asm
-		       ? ".equiv %s__crc_%s, %#08lx\n"
-		       : "%s__crc_%s = %#08lx ;\n",
-		       mod_prefix, name, crc);
+		/* Used as a linker script. */
+		printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc);
 	}
 }
 
@@ -651,10 +648,9 @@
 
 static void genksyms_usage(void)
 {
-	fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
+	fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n"
 #ifdef __GNU_LIBRARY__
 	      "  -a, --arch            Select architecture\n"
-	      "  -A, --asm             Generate assembly rather than linker script\n"
 	      "  -d, --debug           Increment the debug level (repeatable)\n"
 	      "  -D, --dump            Dump expanded symbol defs (for debugging only)\n"
 	      "  -r, --reference file  Read reference symbols from a file\n"
@@ -666,7 +662,6 @@
 	      "  -V, --version         Print the release version\n"
 #else				/* __GNU_LIBRARY__ */
 	      "  -a                    Select architecture\n"
-	      "  -A                    Generate assembly rather than linker script\n"
 	      "  -d                    Increment the debug level (repeatable)\n"
 	      "  -D                    Dump expanded symbol defs (for debugging only)\n"
 	      "  -r file               Read reference symbols from a file\n"
@@ -688,7 +683,6 @@
 #ifdef __GNU_LIBRARY__
 	struct option long_opts[] = {
 		{"arch", 1, 0, 'a'},
-		{"asm", 0, 0, 'A'},
 		{"debug", 0, 0, 'd'},
 		{"warnings", 0, 0, 'w'},
 		{"quiet", 0, 0, 'q'},
@@ -701,10 +695,10 @@
 		{0, 0, 0, 0}
 	};
 
-	while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph",
+	while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph",
 				&long_opts[0], NULL)) != EOF)
 #else				/* __GNU_LIBRARY__ */
-	while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF)
+	while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF)
 #endif				/* __GNU_LIBRARY__ */
 		switch (o) {
 		case 'a':
@@ -722,9 +716,6 @@
 		case 'V':
 			fputs("genksyms version 2.5.60\n", stderr);
 			break;
-		case 'A':
-			flag_asm = 1;
-			break;
 		case 'D':
 			flag_dump_defs = 1;
 			break;
diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped
index 83484fe..971e011 100644
--- a/scripts/genksyms/keywords.c_shipped
+++ b/scripts/genksyms/keywords.c_shipped
@@ -1,4 +1,4 @@
-/* ANSI-C code produced by gperf version 3.0.1 */
+/* ANSI-C code produced by gperf version 3.0.2 */
 /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf  */
 
 #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
@@ -32,7 +32,7 @@
 
 #line 3 "scripts/genksyms/keywords.gperf"
 struct resword { const char *name; int token; };
-/* maximum key range = 64, duplicates = 0 */
+/* maximum key range = 62, duplicates = 0 */
 
 #ifdef __GNUC__
 __inline
@@ -46,32 +46,32 @@
 {
   static const unsigned char asso_values[] =
     {
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67,  0,
-      67, 67, 67, 67, 67, 67, 15, 67, 67, 67,
-       0, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67,  0, 67,  0, 67,  5,
-      25, 20, 15, 30, 67, 15, 67, 67, 10,  0,
-      10, 40, 20, 67, 10,  5,  0, 10, 15, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67, 67, 67, 67, 67,
-      67, 67, 67, 67, 67, 67
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65,  5,
+      65, 65, 65, 65, 65, 65, 35, 65, 65, 65,
+       0, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65,  0, 65,  0, 65,  5,
+      20, 15, 10, 30, 65, 15, 65, 65, 20,  0,
+      10, 35, 20, 65, 10,  5,  0, 10,  5, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65, 65, 65, 65, 65,
+      65, 65, 65, 65, 65, 65
     };
   return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]];
 }
@@ -84,119 +84,116 @@
 {
   enum
     {
-      TOTAL_KEYWORDS = 45,
+      TOTAL_KEYWORDS = 43,
       MIN_WORD_LENGTH = 3,
       MAX_WORD_LENGTH = 24,
       MIN_HASH_VALUE = 3,
-      MAX_HASH_VALUE = 66
+      MAX_HASH_VALUE = 64
     };
 
   static const struct resword wordlist[] =
     {
       {""}, {""}, {""},
-#line 28 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
       {"asm", ASM_KEYW},
       {""},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
       {"__asm", ASM_KEYW},
       {""},
-#line 11 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
       {"__asm__", ASM_KEYW},
       {""}, {""},
-#line 54 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
       {"__typeof__", TYPEOF_KEYW},
       {""},
-#line 14 "scripts/genksyms/keywords.gperf"
-      {"__const", CONST_KEYW},
-#line 13 "scripts/genksyms/keywords.gperf"
-      {"__attribute__", ATTRIBUTE_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
-      {"__const__", CONST_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
-      {"__signed__", SIGNED_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
-      {"static", STATIC_KEYW},
-      {""},
-#line 41 "scripts/genksyms/keywords.gperf"
-      {"int", INT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
-      {"char", CHAR_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
-      {"const", CONST_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
-      {"struct", STRUCT_KEYW},
-#line 26 "scripts/genksyms/keywords.gperf"
-      {"__restrict__", RESTRICT_KEYW},
-#line 27 "scripts/genksyms/keywords.gperf"
-      {"restrict", RESTRICT_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
-      {"__inline__", INLINE_KEYW},
-      {""},
-#line 22 "scripts/genksyms/keywords.gperf"
-      {"__volatile__", VOLATILE_KEYW},
-#line 5 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 25 "scripts/genksyms/keywords.gperf"
-      {"_restrict", RESTRICT_KEYW},
-      {""},
 #line 12 "scripts/genksyms/keywords.gperf"
-      {"__attribute", ATTRIBUTE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+      {"__const", CONST_KEYW},
+#line 11 "scripts/genksyms/keywords.gperf"
+      {"__attribute__", ATTRIBUTE_KEYW},
+#line 13 "scripts/genksyms/keywords.gperf"
+      {"__const__", CONST_KEYW},
+#line 18 "scripts/genksyms/keywords.gperf"
+      {"__signed__", SIGNED_KEYW},
+#line 44 "scripts/genksyms/keywords.gperf"
+      {"static", STATIC_KEYW},
+#line 20 "scripts/genksyms/keywords.gperf"
+      {"__volatile__", VOLATILE_KEYW},
+#line 39 "scripts/genksyms/keywords.gperf"
+      {"int", INT_KEYW},
+#line 32 "scripts/genksyms/keywords.gperf"
+      {"char", CHAR_KEYW},
+#line 33 "scripts/genksyms/keywords.gperf"
+      {"const", CONST_KEYW},
+#line 45 "scripts/genksyms/keywords.gperf"
+      {"struct", STRUCT_KEYW},
+#line 24 "scripts/genksyms/keywords.gperf"
+      {"__restrict__", RESTRICT_KEYW},
+#line 25 "scripts/genksyms/keywords.gperf"
+      {"restrict", RESTRICT_KEYW},
+#line 23 "scripts/genksyms/keywords.gperf"
+      {"_restrict", RESTRICT_KEYW},
 #line 16 "scripts/genksyms/keywords.gperf"
+      {"__inline__", INLINE_KEYW},
+#line 10 "scripts/genksyms/keywords.gperf"
+      {"__attribute", ATTRIBUTE_KEYW},
+      {""},
+#line 14 "scripts/genksyms/keywords.gperf"
       {"__extension__", EXTENSION_KEYW},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
       {"enum", ENUM_KEYW},
-#line 8 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
+      {"__volatile", VOLATILE_KEYW},
+#line 36 "scripts/genksyms/keywords.gperf"
       {"extern", EXTERN_KEYW},
       {""},
-#line 19 "scripts/genksyms/keywords.gperf"
-      {"__signed", SIGNED_KEYW},
-#line 9 "scripts/genksyms/keywords.gperf"
-      {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
-      {"union", UNION_KEYW},
-#line 53 "scripts/genksyms/keywords.gperf"
-      {"typeof", TYPEOF_KEYW},
-#line 48 "scripts/genksyms/keywords.gperf"
-      {"typedef", TYPEDEF_KEYW},
 #line 17 "scripts/genksyms/keywords.gperf"
+      {"__signed", SIGNED_KEYW},
+#line 7 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
+      {""},
+#line 51 "scripts/genksyms/keywords.gperf"
+      {"typeof", TYPEOF_KEYW},
+#line 46 "scripts/genksyms/keywords.gperf"
+      {"typedef", TYPEDEF_KEYW},
+#line 15 "scripts/genksyms/keywords.gperf"
       {"__inline", INLINE_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 31 "scripts/genksyms/keywords.gperf"
       {"auto", AUTO_KEYW},
-#line 21 "scripts/genksyms/keywords.gperf"
-      {"__volatile", VOLATILE_KEYW},
+#line 47 "scripts/genksyms/keywords.gperf"
+      {"union", UNION_KEYW},
+      {""}, {""},
+#line 48 "scripts/genksyms/keywords.gperf"
+      {"unsigned", UNSIGNED_KEYW},
+#line 49 "scripts/genksyms/keywords.gperf"
+      {"void", VOID_KEYW},
+#line 42 "scripts/genksyms/keywords.gperf"
+      {"short", SHORT_KEYW},
       {""}, {""},
 #line 50 "scripts/genksyms/keywords.gperf"
-      {"unsigned", UNSIGNED_KEYW},
-      {""},
-#line 44 "scripts/genksyms/keywords.gperf"
-      {"short", SHORT_KEYW},
-#line 40 "scripts/genksyms/keywords.gperf"
-      {"inline", INLINE_KEYW},
-      {""},
-#line 52 "scripts/genksyms/keywords.gperf"
       {"volatile", VOLATILE_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
-      {"long", LONG_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
-      {"_Bool", BOOL_KEYW},
-      {""}, {""},
-#line 43 "scripts/genksyms/keywords.gperf"
-      {"register", REGISTER_KEYW},
-#line 51 "scripts/genksyms/keywords.gperf"
-      {"void", VOID_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
+      {""},
+#line 37 "scripts/genksyms/keywords.gperf"
       {"float", FLOAT_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
+#line 34 "scripts/genksyms/keywords.gperf"
       {"double", DOUBLE_KEYW},
-      {""}, {""}, {""}, {""},
-#line 45 "scripts/genksyms/keywords.gperf"
-      {"signed", SIGNED_KEYW}
+      {""},
+#line 5 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
+      {""}, {""},
+#line 38 "scripts/genksyms/keywords.gperf"
+      {"inline", INLINE_KEYW},
+#line 6 "scripts/genksyms/keywords.gperf"
+      {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
+#line 41 "scripts/genksyms/keywords.gperf"
+      {"register", REGISTER_KEYW},
+      {""},
+#line 22 "scripts/genksyms/keywords.gperf"
+      {"_Bool", BOOL_KEYW},
+#line 43 "scripts/genksyms/keywords.gperf"
+      {"signed", SIGNED_KEYW},
+      {""}, {""},
+#line 40 "scripts/genksyms/keywords.gperf"
+      {"long", LONG_KEYW}
     };
 
   if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf
index 8abe7ab..5ef3733 100644
--- a/scripts/genksyms/keywords.gperf
+++ b/scripts/genksyms/keywords.gperf
@@ -5,8 +5,6 @@
 EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW
-EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW
 __asm, ASM_KEYW
 __asm__, ASM_KEYW
 __attribute, ATTRIBUTE_KEYW
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 9275812..ad2434b 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -130,9 +130,18 @@
 static int symbol_valid(struct sym_entry *s)
 {
 	/* Symbols which vary between passes.  Passes 1 and 2 must have
-	 * identical symbol lists.
+	 * identical symbol lists.  The kallsyms_* symbols below are only added
+	 * after pass 1, they would be included in pass 2 when --all-symbols is
+	 * specified so exclude them to get a stable symbol list.
 	 */
 	static char *special_symbols[] = {
+		"kallsyms_addresses",
+		"kallsyms_num_syms",
+		"kallsyms_names",
+		"kallsyms_markers",
+		"kallsyms_token_table",
+		"kallsyms_token_index",
+
 	/* Exclude linker generated symbols which vary between passes */
 		"_SDA_BASE_",		/* ppc */
 		"_SDA2_BASE_",		/* ppc */
@@ -164,9 +173,7 @@
 	}
 
 	/* Exclude symbols which vary between passes. */
-	if (strstr((char *)s->sym + offset, "_compiled.") ||
-	    strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 ||
-	    strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0)
+	if (strstr((char *)s->sym + offset, "_compiled."))
 		return 0;
 
 	for (i = 0; special_symbols[i]; i++)
@@ -543,10 +550,8 @@
 		usage();
 
 	read_map(stdin);
-	if (table_cnt) {
-		sort_symbols();
-		optimize_token_table();
-	}
+	sort_symbols();
+	optimize_token_table();
 	write_src();
 
 	return 0;
diff --git a/scripts/mksysmap b/scripts/mksysmap
index 1db316a..6e133a0 100644
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -37,6 +37,9 @@
 
 # readprofile starts reading symbols when _stext is found, and
 # continue until it finds a symbol which is not either of 'T', 't',
-# 'W' or 'w'.
+# 'W' or 'w'. __crc_ are 'A' and placed in the middle
+# so we just ignore them to let readprofile continue to work.
+# (At least sparc64 has __crc_ in the middle).
 
-$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
+
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index d4dc222..491b8b1 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -366,11 +366,17 @@
 
 	for (i = 0; i < count; i++) {
 		const char *id = (char *)devs[i].id;
+		char acpi_id[sizeof(devs[0].id)];
+		int j;
 
 		buf_printf(&mod->dev_table_buf,
 			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+		/* fix broken pnp bus lowercasing */
+		for (j = 0; j < sizeof(acpi_id); j++)
+			acpi_id[j] = toupper(id[j]);
 		buf_printf(&mod->dev_table_buf,
-			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
 	}
 }
 
@@ -416,10 +422,17 @@
 
 			/* add an individual alias for every device entry */
 			if (!dup) {
+				char acpi_id[sizeof(card->devs[0].id)];
+				int k;
+
 				buf_printf(&mod->dev_table_buf,
 					   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+
+				/* fix broken pnp bus lowercasing */
+				for (k = 0; k < sizeof(acpi_id); k++)
+					acpi_id[k] = toupper(id[k]);
 				buf_printf(&mod->dev_table_buf,
-					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+					   "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
 			}
 		}
 	}
diff --git a/scripts/strip-symbols b/scripts/strip-symbols
deleted file mode 100644
index 29ee8c1..0000000
--- a/scripts/strip-symbols
+++ /dev/null
@@ -1,22 +0,0 @@
-<*>
-*.h
-__compound_literal[$.][0-9]*
-__crc_[a-zA-Z_]*
-__exitcall_[a-zA-Z_]*
-__func__[$.][0-9]*
-__FUNCTION__[$.][0-9]*
-gcc[0-9]_compiled[$.]
-__initcall_[a-zA-Z_]*
-__kcrctab_[a-zA-Z_]*
-__kstrtab_[a-zA-Z_]*
-__ksymtab_[a-zA-Z_]*
-__mod_[a-zA-Z_]*[0-9]
-__module_depends
-__param_[a-zA-Z_]*
-__pci_fixup_*PCI_ANY_IDPCI_ANY_ID*
-__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID*
-__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_*
-__PRETTY_FUNCTION__[$.][0-9]*
-__setup_[a-zA-Z_]*
-____versions
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 6e3a184..82b9bdd 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -744,8 +744,8 @@
 	select SND_OXYGEN_LIB
 	help
 	  Say Y here to include support for sound cards based on the
-	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and
-	  HDAV1.3 (Deluxe).
+	  Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
+	  Support for the HDAV1.3 (Deluxe) is very experimental.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-virtuoso.
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 82dd084..5d249a5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8478,6 +8478,7 @@
 	SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
 	SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
+	SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC),
 	SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
 	SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
 	SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL),
@@ -8526,6 +8527,7 @@
 	SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
 	SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
+	SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC),
 	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
 	{}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index c39deeb..3dd4eee 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -81,6 +81,7 @@
 
 enum {
 	STAC_92HD83XXX_REF,
+	STAC_92HD83XXX_PWR_REF,
 	STAC_92HD83XXX_MODELS
 };
 
@@ -334,7 +335,7 @@
 };
 
 static unsigned int stac92hd83xxx_pwr_mapping[4] = {
-	0x03, 0x0c, 0x10, 0x40,
+	0x03, 0x0c, 0x20, 0x40,
 };
 
 static hda_nid_t stac92hd83xxx_amp_nids[1] = {
@@ -841,10 +842,6 @@
 };
 
 static struct hda_verb stac92hd83xxx_core_init[] = {
-	/* start of config #1 */
-	{ 0xe, AC_VERB_SET_CONNECT_SEL, 0x3},
-
-	/* start of config #2 */
 	{ 0xa, AC_VERB_SET_CONNECT_SEL, 0x0},
 	{ 0xb, AC_VERB_SET_CONNECT_SEL, 0x0},
 	{ 0xd, AC_VERB_SET_CONNECT_SEL, 0x1},
@@ -885,8 +882,8 @@
 static struct hda_verb stac925x_core_init[] = {
 	/* set dac0mux for dac converter */
 	{ 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* unmute and set max the selector */
-	{ 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f },
+	/* mute the master volume */
+	{ 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
 	{}
 };
 
@@ -1138,6 +1135,8 @@
 };
 
 static struct snd_kcontrol_new stac925x_mixer[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
 	STAC_INPUT_SOURCE(1),
 	HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
@@ -1736,10 +1735,12 @@
 
 static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
 	[STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs,
+	[STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs,
 };
 
 static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
 	[STAC_92HD83XXX_REF] = "ref",
+	[STAC_92HD83XXX_PWR_REF] = "mic-ref",
 };
 
 static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
@@ -1799,6 +1800,8 @@
 		      "HP dv5", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
 		      "HP dv7", STAC_HP_M4),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7,
+		      "HP dv4", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
 		      "HP dv7", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
@@ -3573,13 +3576,12 @@
 		err = stac92xx_auto_fill_dac_nids(codec);
 		if (err < 0)
 			return err;
+		err = stac92xx_auto_create_multi_out_ctls(codec,
+							  &spec->autocfg);
+		if (err < 0)
+			return err;
 	}
 
-	err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg);
-
-	if (err < 0)
-		return err;
-
 	/* setup analog beep controls */
 	if (spec->anabeep_nid > 0) {
 		err = stac92xx_auto_create_beep_ctls(codec,
@@ -4753,7 +4755,9 @@
 static int patch_stac92hd83xxx(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec;
+	hda_nid_t conn[STAC92HD83_DAC_COUNT + 1];
 	int err;
+	int num_dacs;
 
 	spec  = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -4772,15 +4776,16 @@
 	spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
 	spec->multiout.dac_nids = spec->dac_nids;
 
-	spec->init = stac92hd83xxx_core_init;
-	switch (codec->vendor_id) {
-	case 0x111d7605:
-		break;
-	default:
-		spec->num_pwrs--;
-		spec->init++; /* switch to config #2 */
-	}
 
+	/* set port 0xe to select the last DAC
+	 */
+	num_dacs = snd_hda_get_connections(codec, 0x0e,
+		conn, STAC92HD83_DAC_COUNT + 1) - 1;
+
+	snd_hda_codec_write_cache(codec, 0xe, 0,
+		AC_VERB_SET_CONNECT_SEL, num_dacs);
+
+	spec->init = stac92hd83xxx_core_init;
 	spec->mixer = stac92hd83xxx_mixer;
 	spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
 	spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
@@ -4806,6 +4811,15 @@
 		return err;
 	}
 
+	switch (codec->vendor_id) {
+	case 0x111d7604:
+	case 0x111d7605:
+		if (spec->board_config == STAC_92HD83XXX_PWR_REF)
+			break;
+		spec->num_pwrs = 0;
+		break;
+	}
+
 	err = stac92xx_parse_auto_config(codec, 0x1d, 0);
 	if (!err) {
 		if (spec->board_config < 0) {
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index e9e829e..18c7c91 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -683,7 +683,7 @@
 	if (chip->uart_input_count >= 2 &&
 	    chip->uart_input[chip->uart_input_count - 2] == 'O' &&
 	    chip->uart_input[chip->uart_input_count - 1] == 'K') {
-		printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:");
+		printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
 		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
 				     chip->uart_input, chip->uart_input_count);
 		chip->uart_input_count = 0;
@@ -908,6 +908,7 @@
 	.dac_channels = 8,
 	.dac_volume_min = 0x0f,
 	.dac_volume_max = 0xff,
+	.misc_flags = OXYGEN_MISC_MIDI,
 	.function_flags = OXYGEN_FUNCTION_2WIRE,
 	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c
index 1fac5ef..3dcdc4e 100644
--- a/sound/soc/atmel/atmel-pcm.c
+++ b/sound/soc/atmel/atmel-pcm.c
@@ -44,8 +44,6 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/hardware.h>
-
 #include "atmel-pcm.h"
 
 
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index bcec3f6..acf39a6 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -183,16 +183,6 @@
 };
 
 /**
- * mpc8610_hpcd_machine: ASoC machine data
- */
-static struct snd_soc_card mpc8610_hpcd_machine = {
-	.probe = mpc8610_hpcd_machine_probe,
-	.remove = mpc8610_hpcd_machine_remove,
-	.name = "MPC8610 HPCD",
-	.num_links = 1,
-};
-
-/**
  * mpc8610_hpcd_probe: OF probe function for the fabric driver
  *
  * This function gets called when an SSI node is found in the device tree.
@@ -455,7 +445,11 @@
 	machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */
 	machine_data->dai.ops = &mpc8610_hpcd_ops;
 
-	mpc8610_hpcd_machine.dai_link = &machine_data->dai;
+	machine_data->machine.probe = mpc8610_hpcd_machine_probe;
+	machine_data->machine.remove = mpc8610_hpcd_machine_remove;
+	machine_data->machine.name = "MPC8610 HPCD";
+	machine_data->machine.num_links = 1;
+	machine_data->machine.dai_link = &machine_data->dai;
 
 	/* Allocate a new audio platform device structure */
 	sound_device = platform_device_alloc("soc-audio", -1);
@@ -465,7 +459,7 @@
 		goto error;
 	}
 
-	machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
+	machine_data->sound_devdata.card = &machine_data->machine;
 	machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
 	machine_data->machine.platform = &fsl_soc_platform;