i2c: s3c2410: Add fix for i2c suspend/resume
The I2C driver makes a gpio_request during initialization. This request
happens again on resume and fails due to the earlier successful request.
Re-factor the code to only initialize the gpios during probe.
Errors on resume without this:
[ 16.020000] s3c-i2c s3c2440-i2c.0: gpio [42] request failed
[ 16.020000] s3c-i2c s3c2440-i2c.1: gpio [44] request failed
[ 16.020000] s3c-i2c s3c2440-i2c.2: gpio [6] request failed
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 16592e5..d784c76 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -908,13 +908,6 @@
pdata = i2c->pdata;
- /* inititalise the gpio */
-
- if (pdata->cfg_gpio)
- pdata->cfg_gpio(to_platform_device(i2c->dev));
- else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
- return -EINVAL;
-
/* write slave address */
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
@@ -1055,6 +1048,15 @@
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
+ /* inititalise the i2c gpio lines */
+
+ if (i2c->pdata->cfg_gpio) {
+ i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
+ } else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
+ ret = -EINVAL;
+ goto err_clk;
+ }
+
/* initialise the i2c controller */
ret = s3c24xx_i2c_init(i2c);