ARM i.MX dma: Fix burstsize settings
dmaengine expects the maxburst parameter in words, not bytes.
The imxdma driver and its users do this wrong. Fix this.
As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work
with imx-dma. This broke the driver with imx-sdma support which
correctly takes the maxburst parameter in words. This patch
puts the sdma based sound back to work.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index e18eaab..d99f71c 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -135,7 +135,8 @@
if (ret)
return ret;
- imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+ imx_dma_config_burstlen(imxdmac->imxdma_channel,
+ imxdmac->watermark_level * imxdmac->word_size);
return 0;
default:
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index cc20e02..14aa213 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -715,13 +715,13 @@
int burstlen, ret;
/*
- * use burstlen of 64 in 4 bit mode (--> reg value 0)
- * use burstlen of 16 in 1 bit mode (--> reg value 16)
+ * use burstlen of 64 (16 words) in 4 bit mode (--> reg value 0)
+ * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
*/
if (ios->bus_width == MMC_BUS_WIDTH_4)
- burstlen = 64;
- else
burstlen = 16;
+ else
+ burstlen = 4;
if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
host->burstlen = burstlen;
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index aab7765..b2ed764 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -110,12 +110,12 @@
slave_config.direction = DMA_TO_DEVICE;
slave_config.dst_addr = dma_params->dma_addr;
slave_config.dst_addr_width = buswidth;
- slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+ slave_config.dst_maxburst = dma_params->burstsize;
} else {
slave_config.direction = DMA_FROM_DEVICE;
slave_config.src_addr = dma_params->dma_addr;
slave_config.src_addr_width = buswidth;
- slave_config.src_maxburst = dma_params->burstsize * buswidth;
+ slave_config.src_maxburst = dma_params->burstsize;
}
ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);