netxen: enable ip addr hashing
NX3031 hardware requires local IP addresses for packet
accumulation (LRO). IP address hashing is required to
distinguish a local TCP flow from others (forwarded or
guest).
This patch adds listener for IP and netdev events and
configures IP address in the firmware.
Signed-off-by: Amit Kumar Salecha <amit@netxen.com>
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 847f78b..5d7a2c4 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -880,22 +880,10 @@
return 0;
}
-void netxen_request_firmware(struct netxen_adapter *adapter)
+static int
+netxen_p3_has_mn(struct netxen_adapter *adapter)
{
u32 capability, flashed_ver;
- u8 fw_type;
- struct pci_dev *pdev = adapter->pdev;
- int rc = 0;
-
- if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
- fw_type = NX_P2_MN_ROMIMAGE;
- goto request_fw;
- } else {
- fw_type = NX_P3_CT_ROMIMAGE;
- goto request_fw;
- }
-
-request_mn:
capability = 0;
netxen_rom_fast_read(adapter,
@@ -903,23 +891,35 @@
flashed_ver = NETXEN_DECODE_VERSION(flashed_ver);
if (flashed_ver >= NETXEN_VERSION_CODE(4, 0, 220)) {
+
capability = NXRD32(adapter, NX_PEG_TUNE_CAPABILITY);
- if (capability & NX_PEG_TUNE_MN_PRESENT) {
- fw_type = NX_P3_MN_ROMIMAGE;
- goto request_fw;
- }
+ if (capability & NX_PEG_TUNE_MN_PRESENT)
+ return 1;
+ }
+ return 0;
+}
+
+void netxen_request_firmware(struct netxen_adapter *adapter)
+{
+ u8 fw_type;
+ struct pci_dev *pdev = adapter->pdev;
+ int rc = 0;
+
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ fw_type = NX_P2_MN_ROMIMAGE;
+ goto request_fw;
}
- fw_type = NX_FLASH_ROMIMAGE;
- adapter->fw = NULL;
- goto done;
+ fw_type = netxen_p3_has_mn(adapter) ?
+ NX_P3_MN_ROMIMAGE : NX_P3_CT_ROMIMAGE;
request_fw:
rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
if (rc != 0) {
- if (fw_type == NX_P3_CT_ROMIMAGE) {
+ if (fw_type == NX_P3_MN_ROMIMAGE) {
msleep(1);
- goto request_mn;
+ fw_type = NX_P3_CT_ROMIMAGE;
+ goto request_fw;
}
fw_type = NX_FLASH_ROMIMAGE;
@@ -931,9 +931,10 @@
if (rc != 0) {
release_firmware(adapter->fw);
- if (fw_type == NX_P3_CT_ROMIMAGE) {
+ if (fw_type == NX_P3_MN_ROMIMAGE) {
msleep(1);
- goto request_mn;
+ fw_type = NX_P3_CT_ROMIMAGE;
+ goto request_fw;
}
fw_type = NX_FLASH_ROMIMAGE;
@@ -1292,6 +1293,7 @@
switch (opcode) {
case NETXEN_NIC_RXPKT_DESC:
case NETXEN_OLD_RXPKT_DESC:
+ case NETXEN_NIC_SYN_OFFLOAD:
break;
case NETXEN_NIC_RESPONSE_DESC:
netxen_handle_fw_message(desc_cnt, consumer, sds_ring);