drm/i915/bxt: Implement enable/disable for Display C9 state
v2: Modified as per review comments from Imre
- Mention enabling instead of allowing in the debug trace and
remove unnecessary comments.
v3:
- Rebase to latest.
- Move DC9-related functions from intel_display.c to intel_runtime_pm.c.
v4: (imre)
- remove DC5 disabling, it's a nop at this point
- squashed in Suketu's "Assert the requirements to enter or exit DC9"
patch
- remove check for RUNTIME_PM from assert_can_enable_dc9, it's not a
dependency
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v3)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index ff5cce3..8fe2fde 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -351,6 +351,72 @@
BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) | \
BIT(POWER_DOMAIN_INIT))
+static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n");
+ WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
+ "DC9 already programmed to be enabled.\n");
+ WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled to enable DC9.\n");
+ WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
+ WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
+
+ /*
+ * TODO: check for the following to verify the conditions to enter DC9
+ * state are satisfied:
+ * 1] Check relevant display engine registers to verify if mode set
+ * disable sequence was followed.
+ * 2] Check if display uninitialize sequence is initialized.
+ */
+}
+
+static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
+{
+ WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
+ WARN(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
+ "DC9 already programmed to be disabled.\n");
+ WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled.\n");
+
+ /*
+ * TODO: check for the following to verify DC9 state was indeed
+ * entered before programming to disable it:
+ * 1] Check relevant display engine registers to verify if mode
+ * set disable sequence was followed.
+ * 2] Check if display uninitialize sequence is initialized.
+ */
+}
+
+void bxt_enable_dc9(struct drm_i915_private *dev_priv)
+{
+ uint32_t val;
+
+ assert_can_enable_dc9(dev_priv);
+
+ DRM_DEBUG_KMS("Enabling DC9\n");
+
+ val = I915_READ(DC_STATE_EN);
+ val |= DC_STATE_EN_DC9;
+ I915_WRITE(DC_STATE_EN, val);
+ POSTING_READ(DC_STATE_EN);
+}
+
+void bxt_disable_dc9(struct drm_i915_private *dev_priv)
+{
+ uint32_t val;
+
+ assert_can_disable_dc9(dev_priv);
+
+ DRM_DEBUG_KMS("Disabling DC9\n");
+
+ val = I915_READ(DC_STATE_EN);
+ val &= ~DC_STATE_EN_DC9;
+ I915_WRITE(DC_STATE_EN, val);
+ POSTING_READ(DC_STATE_EN);
+}
+
static void skl_set_power_well(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well, bool enable)
{