V4L/DVB (7673): cx23885: Add support for the Hauppauge HVR1400
DVB-T mode is now supported using the DiBcom dib7000p demodulator
and the Xceive xc3028L silicon tuner. Analog mode is not supported.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 1b9a85e..870d6e1 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -40,6 +40,8 @@
#include "dvb-pll.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
+#include "dib7000p.h"
+#include "dibx000_common.h"
static unsigned int debug;
@@ -189,6 +191,92 @@
.gate = TDA18271_GATE_ANALOG,
};
+struct dibx000_agc_config xc3028_agc_config = {
+ BAND_VHF | BAND_UHF, /* band_caps */
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+ * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
+ * P_agc_nb_est=2, P_agc_write=0
+ */
+ (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+ (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+ 712, /* inv_gain */
+ 21, /* time_stabiliz */
+
+ 0, /* alpha_level */
+ 118, /* thlock */
+
+ 0, /* wbd_inv */
+ 2867, /* wbd_ref */
+ 0, /* wbd_sel */
+ 2, /* wbd_alpha */
+
+ 0, /* agc1_max */
+ 0, /* agc1_min */
+ 39718, /* agc2_max */
+ 9930, /* agc2_min */
+ 0, /* agc1_pt1 */
+ 0, /* agc1_pt2 */
+ 0, /* agc1_pt3 */
+ 0, /* agc1_slope1 */
+ 0, /* agc1_slope2 */
+ 0, /* agc2_pt1 */
+ 128, /* agc2_pt2 */
+ 29, /* agc2_slope1 */
+ 29, /* agc2_slope2 */
+
+ 17, /* alpha_mant */
+ 27, /* alpha_exp */
+ 23, /* beta_mant */
+ 51, /* beta_exp */
+
+ 1, /* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.000000
+ * With external clock = 30.000000 */
+struct dibx000_bandwidth_config xc3028_bw_config = {
+ 60000, /* internal */
+ 30000, /* sampling */
+ 1, /* pll_cfg: prediv */
+ 8, /* pll_cfg: ratio */
+ 3, /* pll_cfg: range */
+ 1, /* pll_cfg: reset */
+ 0, /* pll_cfg: bypass */
+ 0, /* misc: refdiv */
+ 0, /* misc: bypclk_div */
+ 1, /* misc: IO_CLK_en_core */
+ 1, /* misc: ADClkSrc */
+ 0, /* misc: modulo */
+ (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+ (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+ 20452225, /* timf */
+ 30000000 /* xtal_hz */
+};
+
+static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 0,
+ .update_lna = NULL,
+
+ .agc_config_count = 1,
+ .agc = &xc3028_agc_config,
+ .bw = &xc3028_bw_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+ .agc_control = NULL,
+ .spur_protect = 0,
+
+ .output_mode = OUTMODE_MPEG2_SERIAL,
+};
+
static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
{
struct cx23885_tsport *port = ptr;
@@ -343,6 +431,31 @@
&hauppauge_hvr1200_tuner_config);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1400:
+ i2c_bus = &dev->i2c_bus[0];
+ port->dvb.frontend = dvb_attach(dib7000p_attach,
+ &i2c_bus->i2c_adap,
+ 0x12, &hauppauge_hvr1400_dib7000_config);
+ if (port->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_bus[1].i2c_adap,
+ .i2c_addr = 0x64,
+ .callback = cx23885_hvr1500_xc3028_callback,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = "xc3028L-v36.fw",
+ .max_len = 64,
+ .demod = 5000,
+ .d2633 = 1
+ };
+
+ fe = dvb_attach(xc2028_attach,
+ port->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
default:
printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);