diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f5c87e7..6f36b6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -650,47 +650,6 @@
 }
 EXPORT_SYMBOL(iwl_reply_statistics);
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-	int sig_qual;
-	int degradation = PERFECT_RSSI - rssi_dbm;
-
-	/* If we get a noise measurement, use signal-to-noise ratio (SNR)
-	 * as indicator; formula is (signal dbm - noise dbm).
-	 * SNR at or above 40 is a great signal (100%).
-	 * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-	 * Weakest usable signal is usually 10 - 15 dB SNR. */
-	if (noise_dbm) {
-		if (rssi_dbm - noise_dbm >= 40)
-			return 100;
-		else if (rssi_dbm < noise_dbm)
-			return 0;
-		sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-	/* Else use just the signal level.
-	 * This formula is a least squares fit of data points collected and
-	 *   compared with a reference system that had a percentage (%) display
-	 *   for signal quality. */
-	} else
-		sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-			    (15 * RSSI_RANGE + 62 * degradation)) /
-			   (RSSI_RANGE * RSSI_RANGE);
-
-	if (sig_qual > 100)
-		sig_qual = 100;
-	else if (sig_qual < 1)
-		sig_qual = 0;
-
-	return sig_qual;
-}
-
 /* Calc max signal level (dBm) among 3 possible receivers */
 static inline int iwl_calc_rssi(struct iwl_priv *priv,
 				struct iwl_rx_phy_res *rx_resp)
@@ -1101,11 +1060,8 @@
 	if (iwl_is_associated(priv) &&
 	    !test_bit(STATUS_SCANNING, &priv->status)) {
 		rx_status.noise = priv->last_rx_noise;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
-							 rx_status.noise);
 	} else {
 		rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
-		rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
 	}
 
 	/* Reset beacon noise level if not associated. */
@@ -1118,8 +1074,8 @@
 		iwl_dbg_report_frame(priv, phy_res, len, header, 1);
 #endif
 	iwl_dbg_log_rx_data_frame(priv, len, header);
-	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
-		rx_status.signal, rx_status.noise, rx_status.qual,
+	IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+		rx_status.signal, rx_status.noise,
 		(unsigned long long)rx_status.mactime);
 
 	/*