e1000e: Add Support for 38.4MHZ frequency
Add support for 38.4MHz frequency is required for PTP
on CannonLake. SYSTIM frequency adjustment attributes for TIMINCA are
get/set dependent on the hardware clock frequency for a different
types of adapters. 38.4MHz frequency supported by CannonLake
and active once time synchronisation mechanism was enabled
Changed abbreviation from Hz to HZ to be compliant checkpatch code style
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Raanan Avargil <raanan.avargil@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index f16d982..c7c994e 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -379,18 +379,22 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca);
* INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n)
* bits to count nanoseconds leaving the rest for fractional nonseconds.
*/
-#define INCVALUE_96MHz 125
-#define INCVALUE_SHIFT_96MHz 17
-#define INCPERIOD_SHIFT_96MHz 2
-#define INCPERIOD_96MHz (12 >> INCPERIOD_SHIFT_96MHz)
+#define INCVALUE_96MHZ 125
+#define INCVALUE_SHIFT_96MHZ 17
+#define INCPERIOD_SHIFT_96MHZ 2
+#define INCPERIOD_96MHZ (12 >> INCPERIOD_SHIFT_96MHZ)
-#define INCVALUE_25MHz 40
-#define INCVALUE_SHIFT_25MHz 18
-#define INCPERIOD_25MHz 1
+#define INCVALUE_25MHZ 40
+#define INCVALUE_SHIFT_25MHZ 18
+#define INCPERIOD_25MHZ 1
-#define INCVALUE_24MHz 125
-#define INCVALUE_SHIFT_24MHz 14
-#define INCPERIOD_24MHz 3
+#define INCVALUE_24MHZ 125
+#define INCVALUE_SHIFT_24MHZ 14
+#define INCPERIOD_24MHZ 3
+
+#define INCVALUE_38400KHZ 26
+#define INCVALUE_SHIFT_38400KHZ 19
+#define INCPERIOD_38400KHZ 1
/* Another drawback of scaling the incvalue by a large factor is the
* 64-bit SYSTIM register overflows more quickly. This is dealt with
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 256a8a0..b367972 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3509,42 +3509,57 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
switch (hw->mac.type) {
case e1000_pch2lan:
/* Stable 96MHz frequency */
- incperiod = INCPERIOD_96MHz;
- incvalue = INCVALUE_96MHz;
- shift = INCVALUE_SHIFT_96MHz;
- adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ incperiod = INCPERIOD_96MHZ;
+ incvalue = INCVALUE_96MHZ;
+ shift = INCVALUE_SHIFT_96MHZ;
+ adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
break;
case e1000_pch_lpt:
if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
/* Stable 96MHz frequency */
- incperiod = INCPERIOD_96MHz;
- incvalue = INCVALUE_96MHz;
- shift = INCVALUE_SHIFT_96MHz;
- adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHz;
+ incperiod = INCPERIOD_96MHZ;
+ incvalue = INCVALUE_96MHZ;
+ shift = INCVALUE_SHIFT_96MHZ;
+ adapter->cc.shift = shift + INCPERIOD_SHIFT_96MHZ;
} else {
/* Stable 25MHz frequency */
- incperiod = INCPERIOD_25MHz;
- incvalue = INCVALUE_25MHz;
- shift = INCVALUE_SHIFT_25MHz;
+ incperiod = INCPERIOD_25MHZ;
+ incvalue = INCVALUE_25MHZ;
+ shift = INCVALUE_SHIFT_25MHZ;
adapter->cc.shift = shift;
}
break;
case e1000_pch_spt:
if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
/* Stable 24MHz frequency */
- incperiod = INCPERIOD_24MHz;
- incvalue = INCVALUE_24MHz;
- shift = INCVALUE_SHIFT_24MHz;
+ incperiod = INCPERIOD_24MHZ;
+ incvalue = INCVALUE_24MHZ;
+ shift = INCVALUE_SHIFT_24MHZ;
adapter->cc.shift = shift;
break;
}
return -EINVAL;
+ case e1000_pch_cnp:
+ if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
+ /* Stable 24MHz frequency */
+ incperiod = INCPERIOD_24MHZ;
+ incvalue = INCVALUE_24MHZ;
+ shift = INCVALUE_SHIFT_24MHZ;
+ adapter->cc.shift = shift;
+ } else {
+ /* Stable 38400KHz frequency */
+ incperiod = INCPERIOD_38400KHZ;
+ incvalue = INCVALUE_38400KHZ;
+ shift = INCVALUE_SHIFT_38400KHZ;
+ adapter->cc.shift = shift;
+ }
+ break;
case e1000_82574:
case e1000_82583:
/* Stable 25MHz frequency */
- incperiod = INCPERIOD_25MHz;
- incvalue = INCVALUE_25MHz;
- shift = INCVALUE_SHIFT_25MHz;
+ incperiod = INCPERIOD_25MHZ;
+ incvalue = INCVALUE_25MHZ;
+ shift = INCVALUE_SHIFT_25MHZ;
adapter->cc.shift = shift;
break;
default: