regulators: Removed macros for initialization of ab8500 regulators
This patch removes the macros for initializing the regulators.
The purpose is to remove one layer of abstraction and make the
code easier to read.
Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 7d372b8..d9a052c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -311,7 +311,7 @@
return info->fixed_uV;
}
-static struct regulator_ops ab8500_ldo_fixed_ops = {
+static struct regulator_ops ab8500_regulator_fixed_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
@@ -319,79 +319,196 @@
.list_voltage = ab8500_list_voltage,
};
-#define AB8500_LDO(_id, _min_mV, _max_mV, \
- _u_bank, _u_reg, _u_mask, _u_val_enable, \
- _v_bank, _v_reg, _v_mask, _v_table, _v_table_len) \
-[AB8500_LDO_##_id] = { \
- .desc = { \
- .name = "LDO-" #_id, \
- .ops = &ab8500_regulator_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = AB8500_LDO_##_id, \
- .owner = THIS_MODULE, \
- }, \
- .min_uV = (_min_mV) * 1000, \
- .max_uV = (_max_mV) * 1000, \
- .update_bank = _u_bank, \
- .update_reg = _u_reg, \
- .update_mask = _u_mask, \
- .update_val_enable = _u_val_enable, \
- .voltage_bank = _v_bank, \
- .voltage_reg = _v_reg, \
- .voltage_mask = _v_mask, \
- .voltages = _v_table, \
- .voltages_len = _v_table_len, \
- .fixed_uV = 0, \
-}
-
-#define AB8500_FIXED_LDO(_id, _fixed_mV, \
- _u_bank, _u_reg, _u_mask, _u_val_enable) \
-[AB8500_LDO_##_id] = { \
- .desc = { \
- .name = "LDO-" #_id, \
- .ops = &ab8500_ldo_fixed_ops, \
- .type = REGULATOR_VOLTAGE, \
- .id = AB8500_LDO_##_id, \
- .owner = THIS_MODULE, \
- }, \
- .fixed_uV = (_fixed_mV) * 1000, \
- .update_bank = _u_bank, \
- .update_reg = _u_reg, \
- .update_mask = _u_mask, \
- .update_val_enable = _u_val_enable, \
-}
-
-static struct ab8500_regulator_info ab8500_regulator_info[] = {
+static struct ab8500_regulator_info
+ ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
/*
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask, table, table length
*/
- AB8500_LDO(AUX1, 1100, 3300,
- 0x04, 0x09, 0x03, 0x01, 0x04, 0x1f, 0x0f,
- ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX2, 1100, 3300,
- 0x04, 0x09, 0x0c, 0x04, 0x04, 0x20, 0x0f,
- ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
- AB8500_LDO(AUX3, 1100, 3300,
- 0x04, 0x0a, 0x03, 0x01, 0x04, 0x21, 0x07,
- ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)),
- AB8500_LDO(INTCORE, 1100, 3300,
- 0x03, 0x80, 0x44, 0x04, 0x03, 0x80, 0x38,
- ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
+ [AB8500_LDO_AUX1] = {
+ .desc = {
+ .name = "LDO-AUX1",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX1,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x03,
+ .update_val_enable = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x1f,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8500_LDO_AUX2] = {
+ .desc = {
+ .name = "LDO-AUX2",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX2,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .update_bank = 0x04,
+ .update_reg = 0x09,
+ .update_mask = 0x0c,
+ .update_val_enable = 0x04,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x20,
+ .voltage_mask = 0x0f,
+ .voltages = ldo_vauxn_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
+ },
+ [AB8500_LDO_AUX3] = {
+ .desc = {
+ .name = "LDO-AUX3",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUX3,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .update_bank = 0x04,
+ .update_reg = 0x0a,
+ .update_mask = 0x03,
+ .update_val_enable = 0x01,
+ .voltage_bank = 0x04,
+ .voltage_reg = 0x21,
+ .voltage_mask = 0x07,
+ .voltages = ldo_vaux3_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
+ },
+ [AB8500_LDO_INTCORE] = {
+ .desc = {
+ .name = "LDO-INTCORE",
+ .ops = &ab8500_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_INTCORE,
+ .owner = THIS_MODULE,
+ .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x44,
+ .update_val_enable = 0x04,
+ .voltage_bank = 0x03,
+ .voltage_reg = 0x80,
+ .voltage_mask = 0x38,
+ .voltages = ldo_vintcore_voltages,
+ .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
+ },
/*
* Fixed Voltage Regulators
* name, fixed mV,
* update bank, reg, mask, enable val
*/
- AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x02),
- AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x02, 0x02),
- AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08),
- AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10),
- AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04),
- AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0x0c, 0x04),
+ [AB8500_LDO_TVOUT] = {
+ .desc = {
+ .name = "LDO-TVOUT",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_TVOUT,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x80,
+ .update_mask = 0x82,
+ .update_val_enable = 0x02,
+ },
+ [AB8500_LDO_AUDIO] = {
+ .desc = {
+ .name = "LDO-AUDIO",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_AUDIO,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2000000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x02,
+ .update_val_enable = 0x02,
+ },
+ [AB8500_LDO_ANAMIC1] = {
+ .desc = {
+ .name = "LDO-ANAMIC1",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC1,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x08,
+ .update_val_enable = 0x08,
+ },
+ [AB8500_LDO_ANAMIC2] = {
+ .desc = {
+ .name = "LDO-ANAMIC2",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANAMIC2,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 2050000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x10,
+ .update_val_enable = 0x10,
+ },
+ [AB8500_LDO_DMIC] = {
+ .desc = {
+ .name = "LDO-DMIC",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_DMIC,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1800000,
+ .update_bank = 0x03,
+ .update_reg = 0x83,
+ .update_mask = 0x04,
+ .update_val_enable = 0x04,
+ },
+ [AB8500_LDO_ANA] = {
+ .desc = {
+ .name = "LDO-ANA",
+ .ops = &ab8500_regulator_fixed_ops,
+ .type = REGULATOR_VOLTAGE,
+ .id = AB8500_LDO_ANA,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ },
+ .fixed_uV = 1200000,
+ .update_bank = 0x04,
+ .update_reg = 0x06,
+ .update_mask = 0x0c,
+ .update_val_enable = 0x04,
+ },
+
+
};
static __devinit int ab8500_regulator_probe(struct platform_device *pdev)