Merge back cpufreq changes for v4.12.
diff --git a/MAINTAINERS b/MAINTAINERS
index c776906..fabed4c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3450,6 +3450,7 @@
T: git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates)
B: https://bugzilla.kernel.org
F: Documentation/cpu-freq/
+F: Documentation/devicetree/bindings/cpufreq/
F: drivers/cpufreq/
F: include/linux/cpufreq.h
F: tools/testing/selftests/cpufreq/
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 82d8c47..9eea520 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1170,11 +1170,6 @@
status = "disabled";
};
- cpufreq-cooling {
- compatible = "stericsson,db8500-cpufreq-cooling";
- status = "disabled";
- };
-
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
diff --git a/drivers/cpufreq/dbx500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 5c3ec1d..3575b82 100644
--- a/drivers/cpufreq/dbx500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
@@ -18,6 +19,7 @@
static struct cpufreq_frequency_table *freq_table;
static struct clk *armss_clk;
+static struct thermal_cooling_device *cdev;
static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
@@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
return cpufreq_generic_init(policy, freq_table, 20 * 1000);
}
+static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
+{
+ if (!IS_ERR(cdev))
+ cpufreq_cooling_unregister(cdev);
+ return 0;
+}
+
+static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
+{
+ cdev = cpufreq_cooling_register(policy->cpus);
+ if (IS_ERR(cdev))
+ pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
+ else
+ pr_info("Cooling device registered: %s\n", cdev->type);
+}
+
static struct cpufreq_driver dbx500_cpufreq_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
CPUFREQ_NEED_INITIAL_FREQ_CHECK,
@@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
.target_index = dbx500_cpufreq_target,
.get = cpufreq_generic_get,
.init = dbx500_cpufreq_init,
+ .exit = dbx500_cpufreq_exit,
+ .ready = dbx500_cpufreq_ready,
.name = "DBX500",
.attr = cpufreq_generic_attr,
};
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index ab25b123..fd1886f 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
.probe = mt8173_cpufreq_probe,
};
-static int mt8173_cpufreq_driver_init(void)
+/* List of machines supported by this driver */
+static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+ { .compatible = "mediatek,mt817x", },
+ { .compatible = "mediatek,mt8173", },
+ { .compatible = "mediatek,mt8176", },
+
+ { }
+};
+
+static int __init mt8173_cpufreq_driver_init(void)
{
+ struct device_node *np;
+ const struct of_device_id *match;
struct platform_device *pdev;
int err;
- if (!of_machine_is_compatible("mediatek,mt8173"))
+ np = of_find_node_by_path("/");
+ if (!np)
return -ENODEV;
+ match = of_match_node(mt8173_cpufreq_machines, np);
+ of_node_put(np);
+ if (!match) {
+ pr_warn("Machine is not compatible with mt8173-cpufreq\n");
+ return -ENODEV;
+ }
+
err = platform_driver_register(&mt8173_cpufreq_platdrv);
if (err)
return err;
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index bfec1bc..e2ea433 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -52,17 +52,27 @@ static u32 get_bus_freq(void)
{
struct device_node *soc;
u32 sysfreq;
+ struct clk *pltclk;
+ int ret;
+ /* get platform freq by searching bus-frequency property */
soc = of_find_node_by_type(NULL, "soc");
- if (!soc)
- return 0;
+ if (soc) {
+ ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
+ of_node_put(soc);
+ if (!ret)
+ return sysfreq;
+ }
- if (of_property_read_u32(soc, "bus-frequency", &sysfreq))
- sysfreq = 0;
+ /* get platform freq by its clock name */
+ pltclk = clk_get(NULL, "cg-pll0-div1");
+ if (IS_ERR(pltclk)) {
+ pr_err("%s: can't get bus frequency %ld\n",
+ __func__, PTR_ERR(pltclk));
+ return PTR_ERR(pltclk);
+ }
- of_node_put(soc);
-
- return sysfreq;
+ return clk_get_rate(pltclk);
}
static struct clk *cpu_to_clk(int cpu)
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 776b343..0a16cf4 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -291,18 +291,6 @@
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
-config DB8500_CPUFREQ_COOLING
- tristate "DB8500 cpufreq cooling"
- depends on ARCH_U8500 || COMPILE_TEST
- depends on HAS_IOMEM
- depends on CPU_THERMAL
- default y
- help
- Adds DB8500 cpufreq cooling devices, and these cooling devices can be
- bound to thermal zone trip points. When a trip point reached, the
- bound cpufreq cooling device turns active to set CPU frequency low to
- cool down the CPU.
-
config INTEL_POWERCLAMP
tristate "Intel PowerClamp idle injection driver"
depends on THERMAL
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 7adae20..c2372f1 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -41,7 +41,6 @@
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
-obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o
diff --git a/drivers/thermal/db8500_cpufreq_cooling.c b/drivers/thermal/db8500_cpufreq_cooling.c
deleted file mode 100644
index e58bd0b..0000000
--- a/drivers/thermal/db8500_cpufreq_cooling.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
- *
- * Copyright (C) 2012 ST-Ericsson
- * Copyright (C) 2012 Linaro Ltd.
- *
- * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/cpu_cooling.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
-{
- struct thermal_cooling_device *cdev;
-
- cdev = cpufreq_cooling_register(cpu_present_mask);
- if (IS_ERR(cdev)) {
- int ret = PTR_ERR(cdev);
-
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "Failed to register cooling device %d\n",
- ret);
-
- return ret;
- }
-
- platform_set_drvdata(pdev, cdev);
-
- dev_info(&pdev->dev, "Cooling device registered: %s\n", cdev->type);
-
- return 0;
-}
-
-static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
-{
- struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
-
- cpufreq_cooling_unregister(cdev);
-
- return 0;
-}
-
-static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- return -ENOSYS;
-}
-
-static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
-{
- return -ENOSYS;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id db8500_cpufreq_cooling_match[] = {
- { .compatible = "stericsson,db8500-cpufreq-cooling" },
- {},
-};
-MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match);
-#endif
-
-static struct platform_driver db8500_cpufreq_cooling_driver = {
- .driver = {
- .name = "db8500-cpufreq-cooling",
- .of_match_table = of_match_ptr(db8500_cpufreq_cooling_match),
- },
- .probe = db8500_cpufreq_cooling_probe,
- .suspend = db8500_cpufreq_cooling_suspend,
- .resume = db8500_cpufreq_cooling_resume,
- .remove = db8500_cpufreq_cooling_remove,
-};
-
-static int __init db8500_cpufreq_cooling_init(void)
-{
- return platform_driver_register(&db8500_cpufreq_cooling_driver);
-}
-
-static void __exit db8500_cpufreq_cooling_exit(void)
-{
- platform_driver_unregister(&db8500_cpufreq_cooling_driver);
-}
-
-/* Should be later than db8500_cpufreq_register */
-late_initcall(db8500_cpufreq_cooling_init);
-module_exit(db8500_cpufreq_cooling_exit);
-
-MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
-MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
-MODULE_LICENSE("GPL");