| /* |
| * BRIEF MODULE DESCRIPTION |
| * AMD Alchemy Au1xxx IDE interface routines over the Static Bus |
| * |
| * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions |
| * |
| * This program is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License as published by the Free Software |
| * Foundation; either version 2 of the License, or (at your option) any later |
| * version. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND |
| * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR |
| * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE |
| * Interface and Linux Device Driver" Application Note. |
| */ |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/init.h> |
| #include <linux/ide.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm/mach-au1x00/au1xxx.h> |
| #include <asm/mach-au1x00/au1xxx_dbdma.h> |
| #include <asm/mach-au1x00/au1xxx_ide.h> |
| |
| #define DRV_NAME "au1200-ide" |
| #define DRV_AUTHOR "Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>" |
| |
| /* enable the burstmode in the dbdma */ |
| #define IDE_AU1XXX_BURSTMODE 1 |
| |
| static _auide_hwif auide_hwif; |
| |
| #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) |
| |
| static inline void auide_insw(unsigned long port, void *addr, u32 count) |
| { |
| _auide_hwif *ahwif = &auide_hwif; |
| chan_tab_t *ctp; |
| au1x_ddma_desc_t *dp; |
| |
| if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr), |
| count << 1, DDMA_FLAGS_NOIE)) { |
| printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); |
| return; |
| } |
| ctp = *((chan_tab_t **)ahwif->rx_chan); |
| dp = ctp->cur_ptr; |
| while (dp->dscr_cmd0 & DSCR_CMD0_V) |
| ; |
| ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); |
| } |
| |
| static inline void auide_outsw(unsigned long port, void *addr, u32 count) |
| { |
| _auide_hwif *ahwif = &auide_hwif; |
| chan_tab_t *ctp; |
| au1x_ddma_desc_t *dp; |
| |
| if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr), |
| count << 1, DDMA_FLAGS_NOIE)) { |
| printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); |
| return; |
| } |
| ctp = *((chan_tab_t **)ahwif->tx_chan); |
| dp = ctp->cur_ptr; |
| while (dp->dscr_cmd0 & DSCR_CMD0_V) |
| ; |
| ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); |
| } |
| |
| static void au1xxx_input_data(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| auide_insw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); |
| } |
| |
| static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd, |
| void *buf, unsigned int len) |
| { |
| auide_outsw(drive->hwif->io_ports.data_addr, buf, (len + 1) / 2); |
| } |
| #endif |
| |
| static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) |
| { |
| int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); |
| |
| /* set pio mode! */ |
| switch(pio) { |
| case 0: |
| mem_sttime = SBC_IDE_TIMING(PIO0); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; |
| break; |
| |
| case 1: |
| mem_sttime = SBC_IDE_TIMING(PIO1); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; |
| break; |
| |
| case 2: |
| mem_sttime = SBC_IDE_TIMING(PIO2); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; |
| break; |
| |
| case 3: |
| mem_sttime = SBC_IDE_TIMING(PIO3); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; |
| |
| break; |
| |
| case 4: |
| mem_sttime = SBC_IDE_TIMING(PIO4); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; |
| break; |
| } |
| |
| au_writel(mem_sttime,MEM_STTIME2); |
| au_writel(mem_stcfg,MEM_STCFG2); |
| } |
| |
| static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) |
| { |
| int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); |
| |
| switch(speed) { |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| case XFER_MW_DMA_2: |
| mem_sttime = SBC_IDE_TIMING(MDMA2); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; |
| |
| break; |
| case XFER_MW_DMA_1: |
| mem_sttime = SBC_IDE_TIMING(MDMA1); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg &= ~TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; |
| |
| break; |
| case XFER_MW_DMA_0: |
| mem_sttime = SBC_IDE_TIMING(MDMA0); |
| |
| /* set configuration for RCS2# */ |
| mem_stcfg |= TS_MASK; |
| mem_stcfg &= ~TCSOE_MASK; |
| mem_stcfg &= ~TOECS_MASK; |
| mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; |
| |
| break; |
| #endif |
| } |
| |
| au_writel(mem_sttime,MEM_STTIME2); |
| au_writel(mem_stcfg,MEM_STCFG2); |
| } |
| |
| /* |
| * Multi-Word DMA + DbDMA functions |
| */ |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| _auide_hwif *ahwif = &auide_hwif; |
| struct scatterlist *sg; |
| int i = cmd->sg_nents, count = 0; |
| int iswrite = !!(cmd->tf_flags & IDE_TFLAG_WRITE); |
| |
| /* Save for interrupt context */ |
| ahwif->drive = drive; |
| |
| /* fill the descriptors */ |
| sg = hwif->sg_table; |
| while (i && sg_dma_len(sg)) { |
| u32 cur_addr; |
| u32 cur_len; |
| |
| cur_addr = sg_dma_address(sg); |
| cur_len = sg_dma_len(sg); |
| |
| while (cur_len) { |
| u32 flags = DDMA_FLAGS_NOIE; |
| unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; |
| |
| if (++count >= PRD_ENTRIES) { |
| printk(KERN_WARNING "%s: DMA table too small\n", |
| drive->name); |
| return 0; |
| } |
| |
| /* Lets enable intr for the last descriptor only */ |
| if (1==i) |
| flags = DDMA_FLAGS_IE; |
| else |
| flags = DDMA_FLAGS_NOIE; |
| |
| if (iswrite) { |
| if (!au1xxx_dbdma_put_source(ahwif->tx_chan, |
| sg_phys(sg), tc, flags)) { |
| printk(KERN_ERR "%s failed %d\n", |
| __func__, __LINE__); |
| } |
| } else { |
| if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, |
| sg_phys(sg), tc, flags)) { |
| printk(KERN_ERR "%s failed %d\n", |
| __func__, __LINE__); |
| } |
| } |
| |
| cur_addr += tc; |
| cur_len -= tc; |
| } |
| sg = sg_next(sg); |
| i--; |
| } |
| |
| if (count) |
| return 1; |
| |
| return 0; /* revert to PIO for this request */ |
| } |
| |
| static int auide_dma_end(ide_drive_t *drive) |
| { |
| return 0; |
| } |
| |
| static void auide_dma_start(ide_drive_t *drive ) |
| { |
| } |
| |
| |
| static int auide_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| if (auide_build_dmatable(drive, cmd) == 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int auide_dma_test_irq(ide_drive_t *drive) |
| { |
| /* If dbdma didn't execute the STOP command yet, the |
| * active bit is still set |
| */ |
| drive->waiting_for_dma++; |
| if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { |
| printk(KERN_WARNING "%s: timeout waiting for ddma to \ |
| complete\n", drive->name); |
| return 1; |
| } |
| udelay(10); |
| return 0; |
| } |
| |
| static void auide_dma_host_set(ide_drive_t *drive, int on) |
| { |
| } |
| |
| static void auide_ddma_tx_callback(int irq, void *param) |
| { |
| } |
| |
| static void auide_ddma_rx_callback(int irq, void *param) |
| { |
| } |
| #endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ |
| |
| static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags) |
| { |
| dev->dev_id = dev_id; |
| dev->dev_physaddr = (u32)IDE_PHYS_ADDR; |
| dev->dev_intlevel = 0; |
| dev->dev_intpolarity = 0; |
| dev->dev_tsize = tsize; |
| dev->dev_devwidth = devwidth; |
| dev->dev_flags = flags; |
| } |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| static const struct ide_dma_ops au1xxx_dma_ops = { |
| .dma_host_set = auide_dma_host_set, |
| .dma_setup = auide_dma_setup, |
| .dma_start = auide_dma_start, |
| .dma_end = auide_dma_end, |
| .dma_test_irq = auide_dma_test_irq, |
| .dma_lost_irq = ide_dma_lost_irq, |
| }; |
| |
| static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) |
| { |
| _auide_hwif *auide = &auide_hwif; |
| dbdev_tab_t source_dev_tab, target_dev_tab; |
| u32 dev_id, tsize, devwidth, flags; |
| |
| dev_id = IDE_DDMA_REQ; |
| |
| tsize = 8; /* 1 */ |
| devwidth = 32; /* 16 */ |
| |
| #ifdef IDE_AU1XXX_BURSTMODE |
| flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; |
| #else |
| flags = DEV_FLAGS_SYNC; |
| #endif |
| |
| /* setup dev_tab for tx channel */ |
| auide_init_dbdma_dev( &source_dev_tab, |
| dev_id, |
| tsize, devwidth, DEV_FLAGS_OUT | flags); |
| auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| auide_init_dbdma_dev( &source_dev_tab, |
| dev_id, |
| tsize, devwidth, DEV_FLAGS_IN | flags); |
| auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| /* We also need to add a target device for the DMA */ |
| auide_init_dbdma_dev( &target_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| tsize, devwidth, DEV_FLAGS_ANYUSE); |
| auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); |
| |
| /* Get a channel for TX */ |
| auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, |
| auide->tx_dev_id, |
| auide_ddma_tx_callback, |
| (void*)auide); |
| |
| /* Get a channel for RX */ |
| auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, |
| auide->target_dev_id, |
| auide_ddma_rx_callback, |
| (void*)auide); |
| |
| auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, |
| NUM_DESCRIPTORS); |
| auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, |
| NUM_DESCRIPTORS); |
| |
| /* FIXME: check return value */ |
| (void)ide_allocate_dma_engine(hwif); |
| |
| au1xxx_dbdma_start( auide->tx_chan ); |
| au1xxx_dbdma_start( auide->rx_chan ); |
| |
| return 0; |
| } |
| #else |
| static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) |
| { |
| _auide_hwif *auide = &auide_hwif; |
| dbdev_tab_t source_dev_tab; |
| int flags; |
| |
| #ifdef IDE_AU1XXX_BURSTMODE |
| flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE; |
| #else |
| flags = DEV_FLAGS_SYNC; |
| #endif |
| |
| /* setup dev_tab for tx channel */ |
| auide_init_dbdma_dev( &source_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| 8, 32, DEV_FLAGS_OUT | flags); |
| auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| auide_init_dbdma_dev( &source_dev_tab, |
| (u32)DSCR_CMD0_ALWAYS, |
| 8, 32, DEV_FLAGS_IN | flags); |
| auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); |
| |
| /* Get a channel for TX */ |
| auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, |
| auide->tx_dev_id, |
| NULL, |
| (void*)auide); |
| |
| /* Get a channel for RX */ |
| auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, |
| DSCR_CMD0_ALWAYS, |
| NULL, |
| (void*)auide); |
| |
| auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, |
| NUM_DESCRIPTORS); |
| auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, |
| NUM_DESCRIPTORS); |
| |
| au1xxx_dbdma_start( auide->tx_chan ); |
| au1xxx_dbdma_start( auide->rx_chan ); |
| |
| return 0; |
| } |
| #endif |
| |
| static void auide_setup_ports(struct ide_hw *hw, _auide_hwif *ahwif) |
| { |
| int i; |
| unsigned long *ata_regs = hw->io_ports_array; |
| |
| /* FIXME? */ |
| for (i = 0; i < 8; i++) |
| *ata_regs++ = ahwif->regbase + (i << IDE_REG_SHIFT); |
| |
| /* set the Alternative Status register */ |
| *ata_regs = ahwif->regbase + (14 << IDE_REG_SHIFT); |
| } |
| |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA |
| static const struct ide_tp_ops au1xxx_tp_ops = { |
| .exec_command = ide_exec_command, |
| .read_status = ide_read_status, |
| .read_altstatus = ide_read_altstatus, |
| .write_devctl = ide_write_devctl, |
| |
| .dev_select = ide_dev_select, |
| .tf_load = ide_tf_load, |
| .tf_read = ide_tf_read, |
| |
| .input_data = au1xxx_input_data, |
| .output_data = au1xxx_output_data, |
| }; |
| #endif |
| |
| static const struct ide_port_ops au1xxx_port_ops = { |
| .set_pio_mode = au1xxx_set_pio_mode, |
| .set_dma_mode = auide_set_dma_mode, |
| }; |
| |
| static const struct ide_port_info au1xxx_port_info = { |
| .init_dma = auide_ddma_init, |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA |
| .tp_ops = &au1xxx_tp_ops, |
| #endif |
| .port_ops = &au1xxx_port_ops, |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| .dma_ops = &au1xxx_dma_ops, |
| #endif |
| .host_flags = IDE_HFLAG_POST_SET_MODE | |
| IDE_HFLAG_NO_IO_32BIT | |
| IDE_HFLAG_UNMASK_IRQS, |
| .pio_mask = ATA_PIO4, |
| #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
| .mwdma_mask = ATA_MWDMA2, |
| #endif |
| .chipset = ide_au1xxx, |
| }; |
| |
| static int au_ide_probe(struct platform_device *dev) |
| { |
| _auide_hwif *ahwif = &auide_hwif; |
| struct resource *res; |
| struct ide_host *host; |
| int ret = 0; |
| struct ide_hw hw, *hws[] = { &hw }; |
| |
| #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) |
| char *mode = "MWDMA2"; |
| #elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) |
| char *mode = "PIO+DDMA(offload)"; |
| #endif |
| |
| memset(&auide_hwif, 0, sizeof(_auide_hwif)); |
| ahwif->irq = platform_get_irq(dev, 0); |
| |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| |
| if (res == NULL) { |
| pr_debug("%s %d: no base address\n", DRV_NAME, dev->id); |
| ret = -ENODEV; |
| goto out; |
| } |
| if (ahwif->irq < 0) { |
| pr_debug("%s %d: no IRQ\n", DRV_NAME, dev->id); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (!request_mem_region(res->start, resource_size(res), dev->name)) { |
| pr_debug("%s: request_mem_region failed\n", DRV_NAME); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ahwif->regbase = (u32)ioremap(res->start, resource_size(res)); |
| if (ahwif->regbase == 0) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| memset(&hw, 0, sizeof(hw)); |
| auide_setup_ports(&hw, ahwif); |
| hw.irq = ahwif->irq; |
| hw.dev = &dev->dev; |
| |
| ret = ide_host_add(&au1xxx_port_info, hws, 1, &host); |
| if (ret) |
| goto out; |
| |
| auide_hwif.hwif = host->ports[0]; |
| |
| platform_set_drvdata(dev, host); |
| |
| printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); |
| |
| out: |
| return ret; |
| } |
| |
| static int au_ide_remove(struct platform_device *dev) |
| { |
| struct resource *res; |
| struct ide_host *host = platform_get_drvdata(dev); |
| _auide_hwif *ahwif = &auide_hwif; |
| |
| ide_host_remove(host); |
| |
| iounmap((void *)ahwif->regbase); |
| |
| res = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| release_mem_region(res->start, resource_size(res)); |
| |
| return 0; |
| } |
| |
| static struct platform_driver au1200_ide_driver = { |
| .driver = { |
| .name = "au1200-ide", |
| .owner = THIS_MODULE, |
| }, |
| .probe = au_ide_probe, |
| .remove = au_ide_remove, |
| }; |
| |
| static int __init au_ide_init(void) |
| { |
| return platform_driver_register(&au1200_ide_driver); |
| } |
| |
| static void __exit au_ide_exit(void) |
| { |
| platform_driver_unregister(&au1200_ide_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("AU1200 IDE driver"); |
| |
| module_init(au_ide_init); |
| module_exit(au_ide_exit); |