| /* |
| * Copyright (C) 2008 Maarten Maathuis. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sublicense, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial |
| * portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include <acpi/button.h> |
| |
| #include "drmP.h" |
| #include "drm_edid.h" |
| #include "drm_crtc_helper.h" |
| |
| #include "nouveau_reg.h" |
| #include "nouveau_drv.h" |
| #include "nouveau_encoder.h" |
| #include "nouveau_crtc.h" |
| #include "nouveau_connector.h" |
| #include "nouveau_gpio.h" |
| #include "nouveau_hw.h" |
| |
| static void nouveau_connector_hotplug(void *, int); |
| |
| struct nouveau_encoder * |
| find_encoder(struct drm_connector *connector, int type) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_encoder *nv_encoder; |
| struct drm_mode_object *obj; |
| int i, id; |
| |
| for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { |
| id = connector->encoder_ids[i]; |
| if (!id) |
| break; |
| |
| obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER); |
| if (!obj) |
| continue; |
| nv_encoder = nouveau_encoder(obj_to_encoder(obj)); |
| |
| if (type == OUTPUT_ANY || nv_encoder->dcb->type == type) |
| return nv_encoder; |
| } |
| |
| return NULL; |
| } |
| |
| struct nouveau_connector * |
| nouveau_encoder_connector_get(struct nouveau_encoder *encoder) |
| { |
| struct drm_device *dev = to_drm_encoder(encoder)->dev; |
| struct drm_connector *drm_connector; |
| |
| list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) { |
| if (drm_connector->encoder == to_drm_encoder(encoder)) |
| return nouveau_connector(drm_connector); |
| } |
| |
| return NULL; |
| } |
| |
| static void |
| nouveau_connector_destroy(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_nouveau_private *dev_priv; |
| struct drm_device *dev; |
| |
| if (!nv_connector) |
| return; |
| |
| dev = nv_connector->base.dev; |
| dev_priv = dev->dev_private; |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| if (nv_connector->hpd != DCB_GPIO_UNUSED) { |
| nouveau_gpio_isr_del(dev, 0, nv_connector->hpd, 0xff, |
| nouveau_connector_hotplug, connector); |
| } |
| |
| kfree(nv_connector->edid); |
| drm_sysfs_connector_remove(connector); |
| drm_connector_cleanup(connector); |
| kfree(connector); |
| } |
| |
| static struct nouveau_i2c_chan * |
| nouveau_connector_ddc_detect(struct drm_connector *connector, |
| struct nouveau_encoder **pnv_encoder) |
| { |
| struct drm_device *dev = connector->dev; |
| int i; |
| |
| for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { |
| struct nouveau_i2c_chan *i2c = NULL; |
| struct nouveau_encoder *nv_encoder; |
| struct drm_mode_object *obj; |
| int id; |
| |
| id = connector->encoder_ids[i]; |
| if (!id) |
| break; |
| |
| obj = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER); |
| if (!obj) |
| continue; |
| nv_encoder = nouveau_encoder(obj_to_encoder(obj)); |
| |
| if (nv_encoder->dcb->i2c_index < 0xf) |
| i2c = nouveau_i2c_find(dev, nv_encoder->dcb->i2c_index); |
| |
| if (i2c && nouveau_probe_i2c_addr(i2c, 0x50)) { |
| *pnv_encoder = nv_encoder; |
| return i2c; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static struct nouveau_encoder * |
| nouveau_connector_of_detect(struct drm_connector *connector) |
| { |
| #ifdef __powerpc__ |
| struct drm_device *dev = connector->dev; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder; |
| struct device_node *cn, *dn = pci_device_to_OF_node(dev->pdev); |
| |
| if (!dn || |
| !((nv_encoder = find_encoder(connector, OUTPUT_TMDS)) || |
| (nv_encoder = find_encoder(connector, OUTPUT_ANALOG)))) |
| return NULL; |
| |
| for_each_child_of_node(dn, cn) { |
| const char *name = of_get_property(cn, "name", NULL); |
| const void *edid = of_get_property(cn, "EDID", NULL); |
| int idx = name ? name[strlen(name) - 1] - 'A' : 0; |
| |
| if (nv_encoder->dcb->i2c_index == idx && edid) { |
| nv_connector->edid = |
| kmemdup(edid, EDID_LENGTH, GFP_KERNEL); |
| of_node_put(cn); |
| return nv_encoder; |
| } |
| } |
| #endif |
| return NULL; |
| } |
| |
| static void |
| nouveau_connector_set_encoder(struct drm_connector *connector, |
| struct nouveau_encoder *nv_encoder) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_nouveau_private *dev_priv = connector->dev->dev_private; |
| struct drm_device *dev = connector->dev; |
| |
| if (nv_connector->detected_encoder == nv_encoder) |
| return; |
| nv_connector->detected_encoder = nv_encoder; |
| |
| if (dev_priv->card_type >= NV_50) { |
| connector->interlace_allowed = true; |
| connector->doublescan_allowed = true; |
| } else |
| if (nv_encoder->dcb->type == OUTPUT_LVDS || |
| nv_encoder->dcb->type == OUTPUT_TMDS) { |
| connector->doublescan_allowed = false; |
| connector->interlace_allowed = false; |
| } else { |
| connector->doublescan_allowed = true; |
| if (dev_priv->card_type == NV_20 || |
| (dev_priv->card_type == NV_10 && |
| (dev->pci_device & 0x0ff0) != 0x0100 && |
| (dev->pci_device & 0x0ff0) != 0x0150)) |
| /* HW is broken */ |
| connector->interlace_allowed = false; |
| else |
| connector->interlace_allowed = true; |
| } |
| |
| if (nv_connector->type == DCB_CONNECTOR_DVI_I) { |
| drm_connector_property_set_value(connector, |
| dev->mode_config.dvi_i_subconnector_property, |
| nv_encoder->dcb->type == OUTPUT_TMDS ? |
| DRM_MODE_SUBCONNECTOR_DVID : |
| DRM_MODE_SUBCONNECTOR_DVIA); |
| } |
| } |
| |
| static enum drm_connector_status |
| nouveau_connector_detect(struct drm_connector *connector, bool force) |
| { |
| struct drm_device *dev = connector->dev; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = NULL; |
| struct nouveau_encoder *nv_partner; |
| struct nouveau_i2c_chan *i2c; |
| int type; |
| |
| /* Cleanup the previous EDID block. */ |
| if (nv_connector->edid) { |
| drm_mode_connector_update_edid_property(connector, NULL); |
| kfree(nv_connector->edid); |
| nv_connector->edid = NULL; |
| } |
| |
| i2c = nouveau_connector_ddc_detect(connector, &nv_encoder); |
| if (i2c) { |
| nv_connector->edid = drm_get_edid(connector, &i2c->adapter); |
| drm_mode_connector_update_edid_property(connector, |
| nv_connector->edid); |
| if (!nv_connector->edid) { |
| NV_ERROR(dev, "DDC responded, but no EDID for %s\n", |
| drm_get_connector_name(connector)); |
| goto detect_analog; |
| } |
| |
| if (nv_encoder->dcb->type == OUTPUT_DP && |
| !nouveau_dp_detect(to_drm_encoder(nv_encoder))) { |
| NV_ERROR(dev, "Detected %s, but failed init\n", |
| drm_get_connector_name(connector)); |
| return connector_status_disconnected; |
| } |
| |
| /* Override encoder type for DVI-I based on whether EDID |
| * says the display is digital or analog, both use the |
| * same i2c channel so the value returned from ddc_detect |
| * isn't necessarily correct. |
| */ |
| nv_partner = NULL; |
| if (nv_encoder->dcb->type == OUTPUT_TMDS) |
| nv_partner = find_encoder(connector, OUTPUT_ANALOG); |
| if (nv_encoder->dcb->type == OUTPUT_ANALOG) |
| nv_partner = find_encoder(connector, OUTPUT_TMDS); |
| |
| if (nv_partner && ((nv_encoder->dcb->type == OUTPUT_ANALOG && |
| nv_partner->dcb->type == OUTPUT_TMDS) || |
| (nv_encoder->dcb->type == OUTPUT_TMDS && |
| nv_partner->dcb->type == OUTPUT_ANALOG))) { |
| if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL) |
| type = OUTPUT_TMDS; |
| else |
| type = OUTPUT_ANALOG; |
| |
| nv_encoder = find_encoder(connector, type); |
| } |
| |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| return connector_status_connected; |
| } |
| |
| nv_encoder = nouveau_connector_of_detect(connector); |
| if (nv_encoder) { |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| return connector_status_connected; |
| } |
| |
| detect_analog: |
| nv_encoder = find_encoder(connector, OUTPUT_ANALOG); |
| if (!nv_encoder && !nouveau_tv_disable) |
| nv_encoder = find_encoder(connector, OUTPUT_TV); |
| if (nv_encoder && force) { |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| struct drm_encoder_helper_funcs *helper = |
| encoder->helper_private; |
| |
| if (helper->detect(encoder, connector) == |
| connector_status_connected) { |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| return connector_status_connected; |
| } |
| |
| } |
| |
| return connector_status_disconnected; |
| } |
| |
| static enum drm_connector_status |
| nouveau_connector_detect_lvds(struct drm_connector *connector, bool force) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = NULL; |
| enum drm_connector_status status = connector_status_disconnected; |
| |
| /* Cleanup the previous EDID block. */ |
| if (nv_connector->edid) { |
| drm_mode_connector_update_edid_property(connector, NULL); |
| kfree(nv_connector->edid); |
| nv_connector->edid = NULL; |
| } |
| |
| nv_encoder = find_encoder(connector, OUTPUT_LVDS); |
| if (!nv_encoder) |
| return connector_status_disconnected; |
| |
| /* Try retrieving EDID via DDC */ |
| if (!dev_priv->vbios.fp_no_ddc) { |
| status = nouveau_connector_detect(connector, force); |
| if (status == connector_status_connected) |
| goto out; |
| } |
| |
| /* On some laptops (Sony, i'm looking at you) there appears to |
| * be no direct way of accessing the panel's EDID. The only |
| * option available to us appears to be to ask ACPI for help.. |
| * |
| * It's important this check's before trying straps, one of the |
| * said manufacturer's laptops are configured in such a way |
| * the nouveau decides an entry in the VBIOS FP mode table is |
| * valid - it's not (rh#613284) |
| */ |
| if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) { |
| if (!nouveau_acpi_edid(dev, connector)) { |
| status = connector_status_connected; |
| goto out; |
| } |
| } |
| |
| /* If no EDID found above, and the VBIOS indicates a hardcoded |
| * modeline is avalilable for the panel, set it as the panel's |
| * native mode and exit. |
| */ |
| if (nouveau_bios_fp_mode(dev, NULL) && (dev_priv->vbios.fp_no_ddc || |
| nv_encoder->dcb->lvdsconf.use_straps_for_mode)) { |
| status = connector_status_connected; |
| goto out; |
| } |
| |
| /* Still nothing, some VBIOS images have a hardcoded EDID block |
| * stored for the panel stored in them. |
| */ |
| if (!dev_priv->vbios.fp_no_ddc) { |
| struct edid *edid = |
| (struct edid *)nouveau_bios_embedded_edid(dev); |
| if (edid) { |
| nv_connector->edid = kmalloc(EDID_LENGTH, GFP_KERNEL); |
| *(nv_connector->edid) = *edid; |
| status = connector_status_connected; |
| } |
| } |
| |
| out: |
| #if defined(CONFIG_ACPI_BUTTON) || \ |
| (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE)) |
| if (status == connector_status_connected && |
| !nouveau_ignorelid && !acpi_lid_open()) |
| status = connector_status_unknown; |
| #endif |
| |
| drm_mode_connector_update_edid_property(connector, nv_connector->edid); |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| return status; |
| } |
| |
| static void |
| nouveau_connector_force(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder; |
| int type; |
| |
| if (nv_connector->type == DCB_CONNECTOR_DVI_I) { |
| if (connector->force == DRM_FORCE_ON_DIGITAL) |
| type = OUTPUT_TMDS; |
| else |
| type = OUTPUT_ANALOG; |
| } else |
| type = OUTPUT_ANY; |
| |
| nv_encoder = find_encoder(connector, type); |
| if (!nv_encoder) { |
| NV_ERROR(connector->dev, "can't find encoder to force %s on!\n", |
| drm_get_connector_name(connector)); |
| connector->status = connector_status_disconnected; |
| return; |
| } |
| |
| nouveau_connector_set_encoder(connector, nv_encoder); |
| } |
| |
| static int |
| nouveau_connector_set_property(struct drm_connector *connector, |
| struct drm_property *property, uint64_t value) |
| { |
| struct drm_nouveau_private *dev_priv = connector->dev->dev_private; |
| struct nouveau_display_engine *disp = &dev_priv->engine.display; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| struct drm_device *dev = connector->dev; |
| struct nouveau_crtc *nv_crtc; |
| int ret; |
| |
| nv_crtc = NULL; |
| if (connector->encoder && connector->encoder->crtc) |
| nv_crtc = nouveau_crtc(connector->encoder->crtc); |
| |
| /* Scaling mode */ |
| if (property == dev->mode_config.scaling_mode_property) { |
| bool modeset = false; |
| |
| switch (value) { |
| case DRM_MODE_SCALE_NONE: |
| case DRM_MODE_SCALE_FULLSCREEN: |
| case DRM_MODE_SCALE_CENTER: |
| case DRM_MODE_SCALE_ASPECT: |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* LVDS always needs gpu scaling */ |
| if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS && |
| value == DRM_MODE_SCALE_NONE) |
| return -EINVAL; |
| |
| /* Changing between GPU and panel scaling requires a full |
| * modeset |
| */ |
| if ((nv_connector->scaling_mode == DRM_MODE_SCALE_NONE) || |
| (value == DRM_MODE_SCALE_NONE)) |
| modeset = true; |
| nv_connector->scaling_mode = value; |
| |
| if (!nv_crtc) |
| return 0; |
| |
| if (modeset || !nv_crtc->set_scale) { |
| ret = drm_crtc_helper_set_mode(&nv_crtc->base, |
| &nv_crtc->base.mode, |
| nv_crtc->base.x, |
| nv_crtc->base.y, NULL); |
| if (!ret) |
| return -EINVAL; |
| } else { |
| ret = nv_crtc->set_scale(nv_crtc, true); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* Underscan */ |
| if (property == disp->underscan_property) { |
| if (nv_connector->underscan != value) { |
| nv_connector->underscan = value; |
| if (!nv_crtc || !nv_crtc->set_scale) |
| return 0; |
| |
| return nv_crtc->set_scale(nv_crtc, true); |
| } |
| |
| return 0; |
| } |
| |
| if (property == disp->underscan_hborder_property) { |
| if (nv_connector->underscan_hborder != value) { |
| nv_connector->underscan_hborder = value; |
| if (!nv_crtc || !nv_crtc->set_scale) |
| return 0; |
| |
| return nv_crtc->set_scale(nv_crtc, true); |
| } |
| |
| return 0; |
| } |
| |
| if (property == disp->underscan_vborder_property) { |
| if (nv_connector->underscan_vborder != value) { |
| nv_connector->underscan_vborder = value; |
| if (!nv_crtc || !nv_crtc->set_scale) |
| return 0; |
| |
| return nv_crtc->set_scale(nv_crtc, true); |
| } |
| |
| return 0; |
| } |
| |
| /* Dithering */ |
| if (property == disp->dithering_mode) { |
| nv_connector->dithering_mode = value; |
| if (!nv_crtc || !nv_crtc->set_dither) |
| return 0; |
| |
| return nv_crtc->set_dither(nv_crtc, true); |
| } |
| |
| if (property == disp->dithering_depth) { |
| nv_connector->dithering_depth = value; |
| if (!nv_crtc || !nv_crtc->set_dither) |
| return 0; |
| |
| return nv_crtc->set_dither(nv_crtc, true); |
| } |
| |
| if (nv_crtc && nv_crtc->set_color_vibrance) { |
| /* Hue */ |
| if (property == disp->vibrant_hue_property) { |
| nv_crtc->vibrant_hue = value - 90; |
| return nv_crtc->set_color_vibrance(nv_crtc, true); |
| } |
| /* Saturation */ |
| if (property == disp->color_vibrance_property) { |
| nv_crtc->color_vibrance = value - 100; |
| return nv_crtc->set_color_vibrance(nv_crtc, true); |
| } |
| } |
| |
| if (nv_encoder && nv_encoder->dcb->type == OUTPUT_TV) |
| return get_slave_funcs(encoder)->set_property( |
| encoder, connector, property, value); |
| |
| return -EINVAL; |
| } |
| |
| static struct drm_display_mode * |
| nouveau_connector_native_mode(struct drm_connector *connector) |
| { |
| struct drm_connector_helper_funcs *helper = connector->helper_private; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_device *dev = connector->dev; |
| struct drm_display_mode *mode, *largest = NULL; |
| int high_w = 0, high_h = 0, high_v = 0; |
| |
| list_for_each_entry(mode, &nv_connector->base.probed_modes, head) { |
| mode->vrefresh = drm_mode_vrefresh(mode); |
| if (helper->mode_valid(connector, mode) != MODE_OK || |
| (mode->flags & DRM_MODE_FLAG_INTERLACE)) |
| continue; |
| |
| /* Use preferred mode if there is one.. */ |
| if (mode->type & DRM_MODE_TYPE_PREFERRED) { |
| NV_DEBUG_KMS(dev, "native mode from preferred\n"); |
| return drm_mode_duplicate(dev, mode); |
| } |
| |
| /* Otherwise, take the resolution with the largest width, then |
| * height, then vertical refresh |
| */ |
| if (mode->hdisplay < high_w) |
| continue; |
| |
| if (mode->hdisplay == high_w && mode->vdisplay < high_h) |
| continue; |
| |
| if (mode->hdisplay == high_w && mode->vdisplay == high_h && |
| mode->vrefresh < high_v) |
| continue; |
| |
| high_w = mode->hdisplay; |
| high_h = mode->vdisplay; |
| high_v = mode->vrefresh; |
| largest = mode; |
| } |
| |
| NV_DEBUG_KMS(dev, "native mode from largest: %dx%d@%d\n", |
| high_w, high_h, high_v); |
| return largest ? drm_mode_duplicate(dev, largest) : NULL; |
| } |
| |
| struct moderec { |
| int hdisplay; |
| int vdisplay; |
| }; |
| |
| static struct moderec scaler_modes[] = { |
| { 1920, 1200 }, |
| { 1920, 1080 }, |
| { 1680, 1050 }, |
| { 1600, 1200 }, |
| { 1400, 1050 }, |
| { 1280, 1024 }, |
| { 1280, 960 }, |
| { 1152, 864 }, |
| { 1024, 768 }, |
| { 800, 600 }, |
| { 720, 400 }, |
| { 640, 480 }, |
| { 640, 400 }, |
| { 640, 350 }, |
| {} |
| }; |
| |
| static int |
| nouveau_connector_scaler_modes_add(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_display_mode *native = nv_connector->native_mode, *m; |
| struct drm_device *dev = connector->dev; |
| struct moderec *mode = &scaler_modes[0]; |
| int modes = 0; |
| |
| if (!native) |
| return 0; |
| |
| while (mode->hdisplay) { |
| if (mode->hdisplay <= native->hdisplay && |
| mode->vdisplay <= native->vdisplay) { |
| m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay, |
| drm_mode_vrefresh(native), false, |
| false, false); |
| if (!m) |
| continue; |
| |
| m->type |= DRM_MODE_TYPE_DRIVER; |
| |
| drm_mode_probed_add(connector, m); |
| modes++; |
| } |
| |
| mode++; |
| } |
| |
| return modes; |
| } |
| |
| static void |
| nouveau_connector_detect_depth(struct drm_connector *connector) |
| { |
| struct drm_nouveau_private *dev_priv = connector->dev->dev_private; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct nvbios *bios = &dev_priv->vbios; |
| struct drm_display_mode *mode = nv_connector->native_mode; |
| bool duallink; |
| |
| /* if the edid is feeling nice enough to provide this info, use it */ |
| if (nv_connector->edid && connector->display_info.bpc) |
| return; |
| |
| /* if not, we're out of options unless we're LVDS, default to 8bpc */ |
| if (nv_encoder->dcb->type != OUTPUT_LVDS) { |
| connector->display_info.bpc = 8; |
| return; |
| } |
| |
| connector->display_info.bpc = 6; |
| |
| /* LVDS: panel straps */ |
| if (bios->fp_no_ddc) { |
| if (bios->fp.if_is_24bit) |
| connector->display_info.bpc = 8; |
| return; |
| } |
| |
| /* LVDS: DDC panel, need to first determine the number of links to |
| * know which if_is_24bit flag to check... |
| */ |
| if (nv_connector->edid && |
| nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) |
| duallink = ((u8 *)nv_connector->edid)[121] == 2; |
| else |
| duallink = mode->clock >= bios->fp.duallink_transition_clk; |
| |
| if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || |
| ( duallink && (bios->fp.strapless_is_24bit & 2))) |
| connector->display_info.bpc = 8; |
| } |
| |
| static int |
| nouveau_connector_get_modes(struct drm_connector *connector) |
| { |
| struct drm_device *dev = connector->dev; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| int ret = 0; |
| |
| /* destroy the native mode, the attached monitor could have changed. |
| */ |
| if (nv_connector->native_mode) { |
| drm_mode_destroy(dev, nv_connector->native_mode); |
| nv_connector->native_mode = NULL; |
| } |
| |
| if (nv_connector->edid) |
| ret = drm_add_edid_modes(connector, nv_connector->edid); |
| else |
| if (nv_encoder->dcb->type == OUTPUT_LVDS && |
| (nv_encoder->dcb->lvdsconf.use_straps_for_mode || |
| dev_priv->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) { |
| struct drm_display_mode mode; |
| |
| nouveau_bios_fp_mode(dev, &mode); |
| nv_connector->native_mode = drm_mode_duplicate(dev, &mode); |
| } |
| |
| /* Determine display colour depth for everything except LVDS now, |
| * DP requires this before mode_valid() is called. |
| */ |
| if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS) |
| nouveau_connector_detect_depth(connector); |
| |
| /* Find the native mode if this is a digital panel, if we didn't |
| * find any modes through DDC previously add the native mode to |
| * the list of modes. |
| */ |
| if (!nv_connector->native_mode) |
| nv_connector->native_mode = |
| nouveau_connector_native_mode(connector); |
| if (ret == 0 && nv_connector->native_mode) { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(dev, nv_connector->native_mode); |
| drm_mode_probed_add(connector, mode); |
| ret = 1; |
| } |
| |
| /* Determine LVDS colour depth, must happen after determining |
| * "native" mode as some VBIOS tables require us to use the |
| * pixel clock as part of the lookup... |
| */ |
| if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS) |
| nouveau_connector_detect_depth(connector); |
| |
| if (nv_encoder->dcb->type == OUTPUT_TV) |
| ret = get_slave_funcs(encoder)->get_modes(encoder, connector); |
| |
| if (nv_connector->type == DCB_CONNECTOR_LVDS || |
| nv_connector->type == DCB_CONNECTOR_LVDS_SPWG || |
| nv_connector->type == DCB_CONNECTOR_eDP) |
| ret += nouveau_connector_scaler_modes_add(connector); |
| |
| return ret; |
| } |
| |
| static unsigned |
| get_tmds_link_bandwidth(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct drm_nouveau_private *dev_priv = connector->dev->dev_private; |
| struct dcb_entry *dcb = nv_connector->detected_encoder->dcb; |
| |
| if (dcb->location != DCB_LOC_ON_CHIP || |
| dev_priv->chipset >= 0x46) |
| return 165000; |
| else if (dev_priv->chipset >= 0x40) |
| return 155000; |
| else if (dev_priv->chipset >= 0x18) |
| return 135000; |
| else |
| return 112000; |
| } |
| |
| static int |
| nouveau_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; |
| struct drm_encoder *encoder = to_drm_encoder(nv_encoder); |
| unsigned min_clock = 25000, max_clock = min_clock; |
| unsigned clock = mode->clock; |
| |
| switch (nv_encoder->dcb->type) { |
| case OUTPUT_LVDS: |
| if (nv_connector->native_mode && |
| (mode->hdisplay > nv_connector->native_mode->hdisplay || |
| mode->vdisplay > nv_connector->native_mode->vdisplay)) |
| return MODE_PANEL; |
| |
| min_clock = 0; |
| max_clock = 400000; |
| break; |
| case OUTPUT_TMDS: |
| max_clock = get_tmds_link_bandwidth(connector); |
| if (nouveau_duallink && nv_encoder->dcb->duallink_possible) |
| max_clock *= 2; |
| break; |
| case OUTPUT_ANALOG: |
| max_clock = nv_encoder->dcb->crtconf.maxfreq; |
| if (!max_clock) |
| max_clock = 350000; |
| break; |
| case OUTPUT_TV: |
| return get_slave_funcs(encoder)->mode_valid(encoder, mode); |
| case OUTPUT_DP: |
| max_clock = nv_encoder->dp.link_nr; |
| max_clock *= nv_encoder->dp.link_bw; |
| clock = clock * (connector->display_info.bpc * 3) / 10; |
| break; |
| default: |
| BUG_ON(1); |
| return MODE_BAD; |
| } |
| |
| if (clock < min_clock) |
| return MODE_CLOCK_LOW; |
| |
| if (clock > max_clock) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static struct drm_encoder * |
| nouveau_connector_best_encoder(struct drm_connector *connector) |
| { |
| struct nouveau_connector *nv_connector = nouveau_connector(connector); |
| |
| if (nv_connector->detected_encoder) |
| return to_drm_encoder(nv_connector->detected_encoder); |
| |
| return NULL; |
| } |
| |
| static const struct drm_connector_helper_funcs |
| nouveau_connector_helper_funcs = { |
| .get_modes = nouveau_connector_get_modes, |
| .mode_valid = nouveau_connector_mode_valid, |
| .best_encoder = nouveau_connector_best_encoder, |
| }; |
| |
| static const struct drm_connector_funcs |
| nouveau_connector_funcs = { |
| .dpms = drm_helper_connector_dpms, |
| .save = NULL, |
| .restore = NULL, |
| .detect = nouveau_connector_detect, |
| .destroy = nouveau_connector_destroy, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = nouveau_connector_set_property, |
| .force = nouveau_connector_force |
| }; |
| |
| static const struct drm_connector_funcs |
| nouveau_connector_funcs_lvds = { |
| .dpms = drm_helper_connector_dpms, |
| .save = NULL, |
| .restore = NULL, |
| .detect = nouveau_connector_detect_lvds, |
| .destroy = nouveau_connector_destroy, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .set_property = nouveau_connector_set_property, |
| .force = nouveau_connector_force |
| }; |
| |
| static int |
| drm_conntype_from_dcb(enum dcb_connector_type dcb) |
| { |
| switch (dcb) { |
| case DCB_CONNECTOR_VGA : return DRM_MODE_CONNECTOR_VGA; |
| case DCB_CONNECTOR_TV_0 : |
| case DCB_CONNECTOR_TV_1 : |
| case DCB_CONNECTOR_TV_3 : return DRM_MODE_CONNECTOR_TV; |
| case DCB_CONNECTOR_DMS59_0 : |
| case DCB_CONNECTOR_DMS59_1 : |
| case DCB_CONNECTOR_DVI_I : return DRM_MODE_CONNECTOR_DVII; |
| case DCB_CONNECTOR_DVI_D : return DRM_MODE_CONNECTOR_DVID; |
| case DCB_CONNECTOR_LVDS : |
| case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS; |
| case DCB_CONNECTOR_DMS59_DP0: |
| case DCB_CONNECTOR_DMS59_DP1: |
| case DCB_CONNECTOR_DP : return DRM_MODE_CONNECTOR_DisplayPort; |
| case DCB_CONNECTOR_eDP : return DRM_MODE_CONNECTOR_eDP; |
| case DCB_CONNECTOR_HDMI_0 : |
| case DCB_CONNECTOR_HDMI_1 : return DRM_MODE_CONNECTOR_HDMIA; |
| default: |
| break; |
| } |
| |
| return DRM_MODE_CONNECTOR_Unknown; |
| } |
| |
| struct drm_connector * |
| nouveau_connector_create(struct drm_device *dev, int index) |
| { |
| const struct drm_connector_funcs *funcs = &nouveau_connector_funcs; |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct nouveau_display_engine *disp = &dev_priv->engine.display; |
| struct nouveau_connector *nv_connector = NULL; |
| struct drm_connector *connector; |
| int type, ret = 0; |
| bool dummy; |
| |
| NV_DEBUG_KMS(dev, "\n"); |
| |
| list_for_each_entry(connector, &dev->mode_config.connector_list, head) { |
| nv_connector = nouveau_connector(connector); |
| if (nv_connector->index == index) |
| return connector; |
| } |
| |
| nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); |
| if (!nv_connector) |
| return ERR_PTR(-ENOMEM); |
| |
| connector = &nv_connector->base; |
| nv_connector->index = index; |
| |
| /* attempt to parse vbios connector type and hotplug gpio */ |
| nv_connector->dcb = dcb_conn(dev, index); |
| if (nv_connector->dcb) { |
| static const u8 hpd[16] = { |
| 0xff, 0x07, 0x08, 0xff, 0xff, 0x51, 0x52, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff, 0x5e, 0x5f, 0x60, |
| }; |
| |
| u32 entry = ROM16(nv_connector->dcb[0]); |
| if (dcb_conntab(dev)[3] >= 4) |
| entry |= (u32)ROM16(nv_connector->dcb[2]) << 16; |
| |
| nv_connector->hpd = ffs((entry & 0x07033000) >> 12); |
| nv_connector->hpd = hpd[nv_connector->hpd]; |
| |
| nv_connector->type = nv_connector->dcb[0]; |
| if (drm_conntype_from_dcb(nv_connector->type) == |
| DRM_MODE_CONNECTOR_Unknown) { |
| NV_WARN(dev, "unknown connector type %02x\n", |
| nv_connector->type); |
| nv_connector->type = DCB_CONNECTOR_NONE; |
| } |
| |
| /* Gigabyte NX85T */ |
| if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) { |
| if (nv_connector->type == DCB_CONNECTOR_HDMI_1) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| } |
| |
| /* Gigabyte GV-NX86T512H */ |
| if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) { |
| if (nv_connector->type == DCB_CONNECTOR_HDMI_1) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| } |
| } else { |
| nv_connector->type = DCB_CONNECTOR_NONE; |
| nv_connector->hpd = DCB_GPIO_UNUSED; |
| } |
| |
| /* no vbios data, or an unknown dcb connector type - attempt to |
| * figure out something suitable ourselves |
| */ |
| if (nv_connector->type == DCB_CONNECTOR_NONE) { |
| struct drm_nouveau_private *dev_priv = dev->dev_private; |
| struct dcb_table *dcbt = &dev_priv->vbios.dcb; |
| u32 encoders = 0; |
| int i; |
| |
| for (i = 0; i < dcbt->entries; i++) { |
| if (dcbt->entry[i].connector == nv_connector->index) |
| encoders |= (1 << dcbt->entry[i].type); |
| } |
| |
| if (encoders & (1 << OUTPUT_DP)) { |
| if (encoders & (1 << OUTPUT_TMDS)) |
| nv_connector->type = DCB_CONNECTOR_DP; |
| else |
| nv_connector->type = DCB_CONNECTOR_eDP; |
| } else |
| if (encoders & (1 << OUTPUT_TMDS)) { |
| if (encoders & (1 << OUTPUT_ANALOG)) |
| nv_connector->type = DCB_CONNECTOR_DVI_I; |
| else |
| nv_connector->type = DCB_CONNECTOR_DVI_D; |
| } else |
| if (encoders & (1 << OUTPUT_ANALOG)) { |
| nv_connector->type = DCB_CONNECTOR_VGA; |
| } else |
| if (encoders & (1 << OUTPUT_LVDS)) { |
| nv_connector->type = DCB_CONNECTOR_LVDS; |
| } else |
| if (encoders & (1 << OUTPUT_TV)) { |
| nv_connector->type = DCB_CONNECTOR_TV_0; |
| } |
| } |
| |
| type = drm_conntype_from_dcb(nv_connector->type); |
| if (type == DRM_MODE_CONNECTOR_LVDS) { |
| ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy); |
| if (ret) { |
| NV_ERROR(dev, "Error parsing LVDS table, disabling\n"); |
| kfree(nv_connector); |
| return ERR_PTR(ret); |
| } |
| |
| funcs = &nouveau_connector_funcs_lvds; |
| } else { |
| funcs = &nouveau_connector_funcs; |
| } |
| |
| /* defaults, will get overridden in detect() */ |
| connector->interlace_allowed = false; |
| connector->doublescan_allowed = false; |
| |
| drm_connector_init(dev, connector, funcs, type); |
| drm_connector_helper_add(connector, &nouveau_connector_helper_funcs); |
| |
| /* Init DVI-I specific properties */ |
| if (nv_connector->type == DCB_CONNECTOR_DVI_I) |
| drm_connector_attach_property(connector, dev->mode_config.dvi_i_subconnector_property, 0); |
| |
| /* Add overscan compensation options to digital outputs */ |
| if (disp->underscan_property && |
| (type == DRM_MODE_CONNECTOR_DVID || |
| type == DRM_MODE_CONNECTOR_DVII || |
| type == DRM_MODE_CONNECTOR_HDMIA || |
| type == DRM_MODE_CONNECTOR_DisplayPort)) { |
| drm_connector_attach_property(connector, |
| disp->underscan_property, |
| UNDERSCAN_OFF); |
| drm_connector_attach_property(connector, |
| disp->underscan_hborder_property, |
| 0); |
| drm_connector_attach_property(connector, |
| disp->underscan_vborder_property, |
| 0); |
| } |
| |
| /* Add hue and saturation options */ |
| if (disp->vibrant_hue_property) |
| drm_connector_attach_property(connector, |
| disp->vibrant_hue_property, |
| 90); |
| if (disp->color_vibrance_property) |
| drm_connector_attach_property(connector, |
| disp->color_vibrance_property, |
| 150); |
| |
| switch (nv_connector->type) { |
| case DCB_CONNECTOR_VGA: |
| if (dev_priv->card_type >= NV_50) { |
| drm_connector_attach_property(connector, |
| dev->mode_config.scaling_mode_property, |
| nv_connector->scaling_mode); |
| } |
| /* fall-through */ |
| case DCB_CONNECTOR_TV_0: |
| case DCB_CONNECTOR_TV_1: |
| case DCB_CONNECTOR_TV_3: |
| nv_connector->scaling_mode = DRM_MODE_SCALE_NONE; |
| break; |
| default: |
| nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN; |
| |
| drm_connector_attach_property(connector, |
| dev->mode_config.scaling_mode_property, |
| nv_connector->scaling_mode); |
| if (disp->dithering_mode) { |
| nv_connector->dithering_mode = DITHERING_MODE_AUTO; |
| drm_connector_attach_property(connector, |
| disp->dithering_mode, |
| nv_connector->dithering_mode); |
| } |
| if (disp->dithering_depth) { |
| nv_connector->dithering_depth = DITHERING_DEPTH_AUTO; |
| drm_connector_attach_property(connector, |
| disp->dithering_depth, |
| nv_connector->dithering_depth); |
| } |
| break; |
| } |
| |
| connector->polled = DRM_CONNECTOR_POLL_CONNECT; |
| if (nv_connector->hpd != DCB_GPIO_UNUSED) { |
| ret = nouveau_gpio_isr_add(dev, 0, nv_connector->hpd, 0xff, |
| nouveau_connector_hotplug, |
| connector); |
| if (ret == 0) |
| connector->polled = DRM_CONNECTOR_POLL_HPD; |
| } |
| |
| drm_sysfs_connector_add(connector); |
| return connector; |
| } |
| |
| static void |
| nouveau_connector_hotplug(void *data, int plugged) |
| { |
| struct drm_connector *connector = data; |
| struct drm_device *dev = connector->dev; |
| |
| NV_DEBUG(dev, "%splugged %s\n", plugged ? "" : "un", |
| drm_get_connector_name(connector)); |
| |
| if (plugged) |
| drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON); |
| else |
| drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF); |
| |
| drm_helper_hpd_irq_event(dev); |
| } |