[SCSI] lpfc 8.3.29: SLI related fixes
SLI related fixes:
- Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230)
- Fix ELS FDISC failing with local reject / invalid RPI. (126350)
- Fix reset port when reset is needed during fw_dump (125807)
- Fix unbounded firmware revision string from port cause panic (126560)
- Fix driver behavior when receiving an ADISC (126654)
- Fix driver not returning when bad ndlp found in abts error event
handling (126209)
- Add more driver logs in area of SLI4 port error attention and reset
recovery (126813, 124466)
- Fix failure in handling large CQ/EQ identifiers in an IOV
environment (126856)
- Fix for driver using duplicate RPIs after lancer port reset (126723)
- Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a
zero SID (126779, 126897)
- Fix for SLI4 Port delivery for BLS ABORT ACC (126289)
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 42ea367..1a391e2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -293,7 +293,9 @@
}
bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
- bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+ bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
+ (q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
/* PCI read to flush PCI pipeline on re-arming for INTx mode */
if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
@@ -372,7 +374,9 @@
bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
- bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+ bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell,
+ (q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT));
+ bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
return released;
}
@@ -5596,6 +5600,8 @@
for (i = 0; i < count; i++)
phba->sli4_hba.rpi_ids[i] = base + i;
+ lpfc_sli4_node_prep(phba);
+
/* VPIs. */
count = phba->sli4_hba.max_cfg_param.max_vpi;
base = phba->sli4_hba.max_cfg_param.vpi_base;
@@ -7555,6 +7561,8 @@
sgl = (struct sli4_sge *)sglq->sgl;
icmd = &piocbq->iocb;
+ if (icmd->ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+ return sglq->sli4_xritag;
if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
numBdes = icmd->un.genreq64.bdl.bdeSize /
sizeof(struct ulp_bde64);
@@ -7756,6 +7764,7 @@
if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
if (pcmd && (*pcmd == ELS_CMD_FLOGI ||
*pcmd == ELS_CMD_SCR ||
+ *pcmd == ELS_CMD_FDISC ||
*pcmd == ELS_CMD_PLOGI)) {
bf_set(els_req64_sp, &wqe->els_req, 1);
bf_set(els_req64_sid, &wqe->els_req,
@@ -7982,6 +7991,7 @@
xritag = 0;
break;
case CMD_XMIT_BLS_RSP64_CX:
+ ndlp = (struct lpfc_nodelist *)iocbq->context1;
/* As BLS ABTS RSP WQE is very different from other WQEs,
* we re-construct this WQE here based on information in
* iocbq from scratch.
@@ -8008,8 +8018,15 @@
}
bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+
+ /* Use CT=VPI */
+ bf_set(wqe_els_did, &wqe->xmit_bls_rsp.wqe_dest,
+ ndlp->nlp_DID);
+ bf_set(xmit_bls_rsp64_temprpi, &wqe->xmit_bls_rsp,
+ iocbq->iocb.ulpContext);
+ bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1);
bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
- iocbq->iocb.ulpContext);
+ phba->vpi_ids[phba->pport->vpi]);
bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1);
bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com,
LPFC_WQE_LENLOC_NONE);
@@ -8073,8 +8090,7 @@
if (piocb->sli4_xritag == NO_XRI) {
if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
- piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN ||
- piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX)
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
sglq = NULL;
else {
if (pring->txq_cnt) {
@@ -8384,10 +8400,13 @@
{
struct lpfc_vport *vport;
- if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"3115 Node Context not found, driver "
"ignoring abts err event\n");
+ return;
+ }
+
vport = ndlp->vport;
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"3116 Port generated FCP XRI ABORT event on "
@@ -14042,6 +14061,13 @@
{
if (cmd_iocbq)
lpfc_sli_release_iocbq(phba, cmd_iocbq);
+
+ /* Failure means BLS ABORT RSP did not get delivered to remote node*/
+ if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus)
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3154 BLS ABORT RSP failed, data: x%x/x%x\n",
+ rsp_iocbq->iocb.ulpStatus,
+ rsp_iocbq->iocb.un.ulpWord[4]);
}
/**
@@ -14748,7 +14774,8 @@
* provided rpi via a bitmask.
**/
int
-lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp,
+ void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg)
{
LPFC_MBOXQ_t *mboxq;
struct lpfc_hba *phba = ndlp->phba;
@@ -14761,6 +14788,12 @@
/* Post all rpi memory regions to the port. */
lpfc_resume_rpi(mboxq, ndlp);
+ if (cmpl) {
+ mboxq->mbox_cmpl = cmpl;
+ mboxq->context1 = arg;
+ mboxq->context2 = ndlp;
+ }
+ mboxq->vport = ndlp->vport;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,