[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:
s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d8e9c2c..63e0943 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -517,13 +517,13 @@
u32 gpio_bit = 1 << gpio;
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & __IRQT_LOWLVL);
+ trigger & IRQ_TYPE_LEVEL_LOW);
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & __IRQT_HIGHLVL);
+ trigger & IRQ_TYPE_LEVEL_HIGH);
MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & __IRQT_RISEDGE);
+ trigger & IRQ_TYPE_EDGE_RISING);
MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & __IRQT_FALEDGE);
+ trigger & IRQ_TYPE_EDGE_FALLING);
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (trigger != 0)
@@ -555,9 +555,9 @@
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
- if (trigger & __IRQT_RISEDGE)
+ if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
- else if (trigger & __IRQT_FALEDGE)
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio);
else
goto bad;
@@ -567,9 +567,9 @@
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & __IRQT_RISEDGE)
+ if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
- else if (trigger & __IRQT_FALEDGE)
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio);
else
goto bad;
@@ -584,9 +584,9 @@
gpio &= 0x07;
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
- if (trigger & __IRQT_RISEDGE)
+ if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 2 << (gpio << 1);
- if (trigger & __IRQT_FALEDGE)
+ if (trigger & IRQ_TYPE_EDGE_FALLING)
l |= 1 << (gpio << 1);
if (trigger)
/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@
case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & __IRQT_RISEDGE)
+ if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
- else if (trigger & __IRQT_FALEDGE)
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio);
else
goto bad;
@@ -887,7 +887,7 @@
_set_gpio_direction(bank, get_gpio_index(gpio), 1);
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@
/* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type().
*/
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+ _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
#ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) {