e1000: fix whitespace issues and multi-line comments
Fixes whitespace issues, such as lines exceeding 80 chars, needless blank
lines and the use of spaces where tabs are needed. In addition, fix
multi-line comments to align with the networking standard.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000/e1000_param.c b/drivers/net/ethernet/intel/e1000/e1000_param.c
index 750fc01..c9cde35 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_param.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_param.c
@@ -267,7 +267,6 @@
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
**/
-
void e1000_check_options(struct e1000_adapter *adapter)
{
struct e1000_option opt;
@@ -319,7 +318,8 @@
.def = E1000_DEFAULT_RXD,
.arg = { .r = {
.min = E1000_MIN_RXD,
- .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD
}}
};
@@ -408,7 +408,7 @@
if (num_TxAbsIntDelay > bd) {
adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->tx_abs_int_delay = opt.def;
}
@@ -426,7 +426,7 @@
if (num_RxIntDelay > bd) {
adapter->rx_int_delay = RxIntDelay[bd];
e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->rx_int_delay = opt.def;
}
@@ -444,7 +444,7 @@
if (num_RxAbsIntDelay > bd) {
adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
+ adapter);
} else {
adapter->rx_abs_int_delay = opt.def;
}
@@ -479,16 +479,17 @@
break;
case 4:
e_dev_info("%s set to simplified "
- "(2000-8000) ints mode\n", opt.name);
+ "(2000-8000) ints mode\n", opt.name);
adapter->itr_setting = adapter->itr;
break;
default:
e1000_validate_option(&adapter->itr, &opt,
- adapter);
+ adapter);
/* save the setting, because the dynamic bits
* change itr.
* clear the lower two bits because they are
- * used as control */
+ * used as control
+ */
adapter->itr_setting = adapter->itr & ~3;
break;
}
@@ -533,7 +534,6 @@
*
* Handles speed and duplex options on fiber adapters
**/
-
static void e1000_check_fiber_options(struct e1000_adapter *adapter)
{
int bd = adapter->bd_number;
@@ -559,7 +559,6 @@
*
* Handles speed and duplex options on copper adapters
**/
-
static void e1000_check_copper_options(struct e1000_adapter *adapter)
{
struct e1000_option opt;
@@ -681,22 +680,22 @@
e_dev_info("Using Autonegotiation at Half Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
- ADVERTISE_100_HALF;
+ ADVERTISE_100_HALF;
break;
case FULL_DUPLEX:
e_dev_info("Full Duplex specified without Speed\n");
e_dev_info("Using Autonegotiation at Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
- ADVERTISE_100_FULL |
- ADVERTISE_1000_FULL;
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
break;
case SPEED_10:
e_dev_info("10 Mbps Speed specified without Duplex\n");
e_dev_info("Using Autonegotiation at 10 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
- ADVERTISE_10_FULL;
+ ADVERTISE_10_FULL;
break;
case SPEED_10 + HALF_DUPLEX:
e_dev_info("Forcing to 10 Mbps Half Duplex\n");
@@ -715,7 +714,7 @@
e_dev_info("Using Autonegotiation at 100 Mbps only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
- ADVERTISE_100_FULL;
+ ADVERTISE_100_FULL;
break;
case SPEED_100 + HALF_DUPLEX:
e_dev_info("Forcing to 100 Mbps Half Duplex\n");