ath10k: introduce dynamic vdev parameters
Both firmwares (main and 10.x) have different set of vdev
parameters. To stay in sync with FW API, this patch introduces
a dynamic registering method.
ath10k_wmi_vdev_set_param() takes now indirect u32 value
to identify the Vdev parameter it want's to set.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 5383f7e..1518586 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2695,6 +2695,61 @@
/* Value to disable fixed rate setting */
#define WMI_FIXED_RATE_NONE (0xff)
+struct wmi_vdev_param_map {
+ u32 rts_threshold;
+ u32 fragmentation_threshold;
+ u32 beacon_interval;
+ u32 listen_interval;
+ u32 multicast_rate;
+ u32 mgmt_tx_rate;
+ u32 slot_time;
+ u32 preamble;
+ u32 swba_time;
+ u32 wmi_vdev_stats_update_period;
+ u32 wmi_vdev_pwrsave_ageout_time;
+ u32 wmi_vdev_host_swba_interval;
+ u32 dtim_period;
+ u32 wmi_vdev_oc_scheduler_air_time_limit;
+ u32 wds;
+ u32 atim_window;
+ u32 bmiss_count_max;
+ u32 bmiss_first_bcnt;
+ u32 bmiss_final_bcnt;
+ u32 feature_wmm;
+ u32 chwidth;
+ u32 chextoffset;
+ u32 disable_htprotection;
+ u32 sta_quickkickout;
+ u32 mgmt_rate;
+ u32 protection_mode;
+ u32 fixed_rate;
+ u32 sgi;
+ u32 ldpc;
+ u32 tx_stbc;
+ u32 rx_stbc;
+ u32 intra_bss_fwd;
+ u32 def_keyid;
+ u32 nss;
+ u32 bcast_data_rate;
+ u32 mcast_data_rate;
+ u32 mcast_indicate;
+ u32 dhcp_indicate;
+ u32 unknown_dest_indicate;
+ u32 ap_keepalive_min_idle_inactive_time_secs;
+ u32 ap_keepalive_max_idle_inactive_time_secs;
+ u32 ap_keepalive_max_unresponsive_time_secs;
+ u32 ap_enable_nawds;
+ u32 mcast2ucast_set;
+ u32 enable_rtscts;
+ u32 txbf;
+ u32 packet_powersave;
+ u32 drop_unencry;
+ u32 tx_encap_type;
+ u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
+};
+
+#define WMI_VDEV_PARAM_UNSUPPORTED 0
+
/* the definition of different VDEV parameters */
enum wmi_vdev_param {
/* RTS Threshold */
@@ -2826,6 +2881,121 @@
WMI_VDEV_PARAM_TX_ENCAP_TYPE,
};
+/* the definition of different VDEV parameters */
+enum wmi_10x_vdev_param {
+ /* RTS Threshold */
+ WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
+ /* Fragmentation threshold */
+ WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ /* beacon interval in TUs */
+ WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
+ /* Listen interval in TUs */
+ WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
+ /* muticast rate in Mbps */
+ WMI_10X_VDEV_PARAM_MULTICAST_RATE,
+ /* management frame rate in Mbps */
+ WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
+ /* slot time (long vs short) */
+ WMI_10X_VDEV_PARAM_SLOT_TIME,
+ /* preamble (long vs short) */
+ WMI_10X_VDEV_PARAM_PREAMBLE,
+ /* SWBA time (time before tbtt in msec) */
+ WMI_10X_VDEV_PARAM_SWBA_TIME,
+ /* time period for updating VDEV stats */
+ WMI_10X_VDEV_STATS_UPDATE_PERIOD,
+ /* age out time in msec for frames queued for station in power save */
+ WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
+ /*
+ * Host SWBA interval (time in msec before tbtt for SWBA event
+ * generation).
+ */
+ WMI_10X_VDEV_HOST_SWBA_INTERVAL,
+ /* DTIM period (specified in units of num beacon intervals) */
+ WMI_10X_VDEV_PARAM_DTIM_PERIOD,
+ /*
+ * scheduler air time limit for this VDEV. used by off chan
+ * scheduler.
+ */
+ WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
+ /* enable/dsiable WDS for this VDEV */
+ WMI_10X_VDEV_PARAM_WDS,
+ /* ATIM Window */
+ WMI_10X_VDEV_PARAM_ATIM_WINDOW,
+ /* BMISS max */
+ WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
+ /* WMM enables/disabled */
+ WMI_10X_VDEV_PARAM_FEATURE_WMM,
+ /* Channel width */
+ WMI_10X_VDEV_PARAM_CHWIDTH,
+ /* Channel Offset */
+ WMI_10X_VDEV_PARAM_CHEXTOFFSET,
+ /* Disable HT Protection */
+ WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
+ /* Quick STA Kickout */
+ WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
+ /* Rate to be used with Management frames */
+ WMI_10X_VDEV_PARAM_MGMT_RATE,
+ /* Protection Mode */
+ WMI_10X_VDEV_PARAM_PROTECTION_MODE,
+ /* Fixed rate setting */
+ WMI_10X_VDEV_PARAM_FIXED_RATE,
+ /* Short GI Enable/Disable */
+ WMI_10X_VDEV_PARAM_SGI,
+ /* Enable LDPC */
+ WMI_10X_VDEV_PARAM_LDPC,
+ /* Enable Tx STBC */
+ WMI_10X_VDEV_PARAM_TX_STBC,
+ /* Enable Rx STBC */
+ WMI_10X_VDEV_PARAM_RX_STBC,
+ /* Intra BSS forwarding */
+ WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
+ /* Setting Default xmit key for Vdev */
+ WMI_10X_VDEV_PARAM_DEF_KEYID,
+ /* NSS width */
+ WMI_10X_VDEV_PARAM_NSS,
+ /* Set the custom rate for the broadcast data frames */
+ WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
+ /* Set the custom rate (rate-code) for multicast data frames */
+ WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
+ /* Tx multicast packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_MCAST_INDICATE,
+ /* Tx DHCP packet indicate Enable/Disable */
+ WMI_10X_VDEV_PARAM_DHCP_INDICATE,
+ /* Enable host inspection of Tx unicast packet to unknown destination */
+ WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
+
+ /* The minimum amount of time AP begins to consider STA inactive */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered inactive when there is no recent
+ * TX/RX activity and no downlink frames are buffered for it. Once a
+ * STA exceeds the maximum idle inactive time, the AP will send an
+ * 802.11 data-null as a keep alive to verify the STA is still
+ * associated. If the STA does ACK the data-null, or if the data-null
+ * is buffered and the STA does not retrieve it, the STA will be
+ * considered unresponsive
+ * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
+ */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
+
+ /*
+ * An associated STA is considered unresponsive if there is no recent
+ * TX/RX activity and downlink frames are buffered for it. Once a STA
+ * exceeds the maximum unresponsive time, the AP will send a
+ * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
+ WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
+
+ /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
+ WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
+
+ WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
+ /* Enable/Disable RTS-CTS */
+ WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
+
+ WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
+};
+
/* slot time long */
#define WMI_VDEV_SLOT_TIME_LONG 0x1
/* slot time short */
@@ -3648,7 +3818,7 @@
const u8 *bssid);
int ath10k_wmi_vdev_down(struct ath10k *ar, u32 vdev_id);
int ath10k_wmi_vdev_set_param(struct ath10k *ar, u32 vdev_id,
- enum wmi_vdev_param param_id, u32 param_value);
+ u32 param_id, u32 param_value);
int ath10k_wmi_vdev_install_key(struct ath10k *ar,
const struct wmi_vdev_install_key_arg *arg);
int ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,