| /* |
| * phy-mvebu-sata.c: SATA Phy driver for the Marvell mvebu SoCs. |
| * |
| * Copyright (C) 2013 Andrew Lunn <andrew@lunn.ch> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/clk.h> |
| #include <linux/phy/phy.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| |
| struct priv { |
| struct clk *clk; |
| void __iomem *base; |
| }; |
| |
| #define SATA_PHY_MODE_2 0x0330 |
| #define MODE_2_FORCE_PU_TX BIT(0) |
| #define MODE_2_FORCE_PU_RX BIT(1) |
| #define MODE_2_PU_PLL BIT(2) |
| #define MODE_2_PU_IVREF BIT(3) |
| #define SATA_IF_CTRL 0x0050 |
| #define CTRL_PHY_SHUTDOWN BIT(9) |
| |
| static int phy_mvebu_sata_power_on(struct phy *phy) |
| { |
| struct priv *priv = phy_get_drvdata(phy); |
| u32 reg; |
| |
| clk_prepare_enable(priv->clk); |
| |
| /* Enable PLL and IVREF */ |
| reg = readl(priv->base + SATA_PHY_MODE_2); |
| reg |= (MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX | |
| MODE_2_PU_PLL | MODE_2_PU_IVREF); |
| writel(reg , priv->base + SATA_PHY_MODE_2); |
| |
| /* Enable PHY */ |
| reg = readl(priv->base + SATA_IF_CTRL); |
| reg &= ~CTRL_PHY_SHUTDOWN; |
| writel(reg, priv->base + SATA_IF_CTRL); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| static int phy_mvebu_sata_power_off(struct phy *phy) |
| { |
| struct priv *priv = phy_get_drvdata(phy); |
| u32 reg; |
| |
| clk_prepare_enable(priv->clk); |
| |
| /* Disable PLL and IVREF */ |
| reg = readl(priv->base + SATA_PHY_MODE_2); |
| reg &= ~(MODE_2_FORCE_PU_TX | MODE_2_FORCE_PU_RX | |
| MODE_2_PU_PLL | MODE_2_PU_IVREF); |
| writel(reg, priv->base + SATA_PHY_MODE_2); |
| |
| /* Disable PHY */ |
| reg = readl(priv->base + SATA_IF_CTRL); |
| reg |= CTRL_PHY_SHUTDOWN; |
| writel(reg, priv->base + SATA_IF_CTRL); |
| |
| clk_disable_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| static struct phy_ops phy_mvebu_sata_ops = { |
| .power_on = phy_mvebu_sata_power_on, |
| .power_off = phy_mvebu_sata_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int phy_mvebu_sata_probe(struct platform_device *pdev) |
| { |
| struct phy_provider *phy_provider; |
| struct resource *res; |
| struct priv *priv; |
| struct phy *phy; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| priv->clk = devm_clk_get(&pdev->dev, "sata"); |
| if (IS_ERR(priv->clk)) |
| return PTR_ERR(priv->clk); |
| |
| phy_provider = devm_of_phy_provider_register(&pdev->dev, |
| of_phy_simple_xlate); |
| if (IS_ERR(phy_provider)) |
| return PTR_ERR(phy_provider); |
| |
| phy = devm_phy_create(&pdev->dev, &phy_mvebu_sata_ops, NULL); |
| if (IS_ERR(phy)) |
| return PTR_ERR(phy); |
| |
| phy_set_drvdata(phy, priv); |
| |
| /* The boot loader may of left it on. Turn it off. */ |
| phy_mvebu_sata_power_off(phy); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id phy_mvebu_sata_of_match[] = { |
| { .compatible = "marvell,mvebu-sata-phy" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match); |
| |
| static struct platform_driver phy_mvebu_sata_driver = { |
| .probe = phy_mvebu_sata_probe, |
| .driver = { |
| .name = "phy-mvebu-sata", |
| .owner = THIS_MODULE, |
| .of_match_table = phy_mvebu_sata_of_match, |
| } |
| }; |
| module_platform_driver(phy_mvebu_sata_driver); |
| |
| MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); |
| MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver"); |
| MODULE_LICENSE("GPL v2"); |