MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S
index 6b876ca..507147a 100644
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@@ -67,8 +67,8 @@
#define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3) \
LOAD _t0, (offset + UNIT(0))(src); \
LOAD _t1, (offset + UNIT(1))(src); \
- LOAD _t2, (offset + UNIT(2))(src); \
- LOAD _t3, (offset + UNIT(3))(src); \
+ LOAD _t2, (offset + UNIT(2))(src); \
+ LOAD _t3, (offset + UNIT(3))(src); \
ADDC(sum, _t0); \
ADDC(sum, _t1); \
ADDC(sum, _t2); \
@@ -285,7 +285,7 @@
1:
#endif
.set reorder
- /* Add the passed partial csum. */
+ /* Add the passed partial csum. */
ADDC32(sum, a2)
jr ra
.set noreorder
@@ -298,7 +298,7 @@
* csum_partial_copy_nocheck(src, dst, len, sum)
* __csum_partial_copy_user(src, dst, len, sum, errp)
*
- * See "Spec" in memcpy.S for details. Unlike __copy_user, all
+ * See "Spec" in memcpy.S for details. Unlike __copy_user, all
* function in this file use the standard calling convention.
*/
@@ -371,16 +371,16 @@
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define LDFIRST LOADR
-#define LDREST LOADL
+#define LDREST LOADL
#define STFIRST STORER
-#define STREST STOREL
+#define STREST STOREL
#define SHIFT_DISCARD SLLV
#define SHIFT_DISCARD_REVERT SRLV
#else
#define LDFIRST LOADL
-#define LDREST LOADR
+#define LDREST LOADR
#define STFIRST STOREL
-#define STREST STORER
+#define STREST STORER
#define SHIFT_DISCARD SRLV
#define SHIFT_DISCARD_REVERT SLLV
#endif
@@ -430,7 +430,7 @@
* src and dst are aligned; need to compute rem
*/
.Lboth_aligned:
- SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
+ SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
beqz t0, .Lcleanup_both_aligned # len < 8*NBYTES
nop
SUB len, 8*NBYTES # subtract here for bgez loop
@@ -518,7 +518,7 @@
/*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch
- * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
+ * mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
* because can't assume read-access to dst. Instead, use
* STREST dst, which doesn't require read access to dst.
*
@@ -532,7 +532,7 @@
li bits, 8*NBYTES
SLL rem, len, 3 # rem = number of bits to keep
EXC( LOAD t0, 0(src), .Ll_exc)
- SUB bits, bits, rem # bits = number of bits to discard
+ SUB bits, bits, rem # bits = number of bits to discard
SHIFT_DISCARD t0, t0, bits
EXC( STREST t0, -1(t1), .Ls_exc)
SHIFT_DISCARD_REVERT t0, t0, bits
@@ -551,7 +551,7 @@
* Set match = (src and dst have same alignment)
*/
#define match rem
-EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc)
+EXC( LDFIRST t3, FIRST(0)(src), .Ll_exc)
ADD t2, zero, NBYTES
EXC( LDREST t3, REST(0)(src), .Ll_exc_copy)
SUB t2, t2, t1 # t2 = number of bytes copied
@@ -568,9 +568,9 @@
ADD src, src, t2
.Lsrc_unaligned_dst_aligned:
- SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
+ SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
beqz t0, .Lcleanup_src_unaligned
- and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
+ and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
1:
/*
* Avoid consecutive LD*'s to the same register since some mips
@@ -578,13 +578,13 @@
* It's OK to load FIRST(N+1) before REST(N) because the two addresses
* are to the same unit (unless src is aligned, but it's not).
*/
-EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
-EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy)
- SUB len, len, 4*NBYTES
+EXC( LDFIRST t0, FIRST(0)(src), .Ll_exc)
+EXC( LDFIRST t1, FIRST(1)(src), .Ll_exc_copy)
+ SUB len, len, 4*NBYTES
EXC( LDREST t0, REST(0)(src), .Ll_exc_copy)
EXC( LDREST t1, REST(1)(src), .Ll_exc_copy)
-EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy)
-EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy)
+EXC( LDFIRST t2, FIRST(2)(src), .Ll_exc_copy)
+EXC( LDFIRST t3, FIRST(3)(src), .Ll_exc_copy)
EXC( LDREST t2, REST(2)(src), .Ll_exc_copy)
EXC( LDREST t3, REST(3)(src), .Ll_exc_copy)
ADD src, src, 4*NBYTES
@@ -634,7 +634,7 @@
#define SHIFT_INC -8
#endif
move t2, zero # partial word
- li t3, SHIFT_START # shift
+ li t3, SHIFT_START # shift
/* use .Ll_exc_copy here to return correct sum on fault */
#define COPY_BYTE(N) \
EXC( lbu t0, N(src), .Ll_exc_copy); \
@@ -642,7 +642,7 @@
EXC( sb t0, N(dst), .Ls_exc); \
SLLV t0, t0, t3; \
addu t3, SHIFT_INC; \
- beqz len, .Lcopy_bytes_done; \
+ beqz len, .Lcopy_bytes_done; \
or t2, t0
COPY_BYTE(0)