Merge branch 'bnx2x'
Yuval Mintz says:
====================
bnx2x: Bug fixes patch series
Most of what this parch series contains is SR-IOV related bug fixes.
Additionally, it contains some small fixes for legacy devices/modes.
Please consider applying these patches to `net'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a1f66e2..2d5fce4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1250,7 +1250,10 @@
* Therefore, if they would have been defined in the same union,
* data can get corrupted.
*/
- struct afex_vif_list_ramrod_data func_afex_rdata;
+ union {
+ struct afex_vif_list_ramrod_data viflist_data;
+ struct function_update_data func_update;
+ } func_afex_rdata;
/* used by dmae command executer */
struct dmae_command dmae[MAX_DMAE_C];
@@ -2499,4 +2502,6 @@
#define MCPR_SCRATCH_BASE(bp) \
(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
+
#endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 814d0ec..8b3107b 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -11447,9 +11447,9 @@
}
}
- /* adjust igu_sb_cnt to MF for E1x */
- if (CHIP_IS_E1x(bp) && IS_MF(bp))
- bp->igu_sb_cnt /= E1HVN_MAX;
+ /* adjust igu_sb_cnt to MF for E1H */
+ if (CHIP_IS_E1H(bp) && IS_MF(bp))
+ bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT);
/* port info */
bnx2x_get_port_hwinfo(bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 32c92ab..18438a5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -2038,6 +2038,7 @@
struct bnx2x_vlan_mac_ramrod_params p;
struct bnx2x_exe_queue_obj *exeq = &o->exe_queue;
struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n;
+ unsigned long flags;
int read_lock;
int rc = 0;
@@ -2046,8 +2047,9 @@
spin_lock_bh(&exeq->lock);
list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) {
- if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags ==
- *vlan_mac_flags) {
+ flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags;
+ if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+ BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
rc = exeq->remove(bp, exeq->owner, exeq_pos);
if (rc) {
BNX2X_ERR("Failed to remove command\n");
@@ -2080,7 +2082,9 @@
return read_lock;
list_for_each_entry(pos, &o->head, link) {
- if (pos->vlan_mac_flags == *vlan_mac_flags) {
+ flags = pos->vlan_mac_flags;
+ if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) ==
+ BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) {
p.user_req.vlan_mac_flags = pos->vlan_mac_flags;
memcpy(&p.user_req.u, &pos->u, sizeof(pos->u));
rc = bnx2x_config_vlan_mac(bp, &p);
@@ -4382,8 +4386,11 @@
struct bnx2x_raw_obj *r = &o->raw;
/* Do nothing if only driver cleanup was requested */
- if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags))
+ if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) {
+ DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n",
+ p->ramrod_flags);
return 0;
+ }
r->set_pending(r);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 658f4e3..6a53c15 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -266,6 +266,13 @@
BNX2X_DONT_CONSUME_CAM_CREDIT,
BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
};
+/* When looking for matching filters, some flags are not interesting */
+#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \
+ 1 << BNX2X_ETH_MAC | \
+ 1 << BNX2X_ISCSI_ETH_MAC | \
+ 1 << BNX2X_NETQ_ETH_MAC)
+#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
+ ((flags) & BNX2X_VLAN_MAC_CMP_MASK)
struct bnx2x_vlan_mac_ramrod_params {
/* Object to run the command from */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 2e46c28..e7845e5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1209,6 +1209,11 @@
/* next state */
vfop->state = BNX2X_VFOP_RXMODE_DONE;
+ /* record the accept flags in vfdb so hypervisor can modify them
+ * if necessary
+ */
+ bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) =
+ ramrod->rx_accept_flags;
vfop->rc = bnx2x_config_rx_mode(bp, ramrod);
bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE);
op_err:
@@ -1224,39 +1229,43 @@
return;
}
+static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid,
+ struct bnx2x_rx_mode_ramrod_params *ramrod,
+ struct bnx2x_virtf *vf,
+ unsigned long accept_flags)
+{
+ struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
+
+ memset(ramrod, 0, sizeof(*ramrod));
+ ramrod->cid = vfq->cid;
+ ramrod->cl_id = vfq_cl_id(vf, vfq);
+ ramrod->rx_mode_obj = &bp->rx_mode_obj;
+ ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
+ ramrod->rx_accept_flags = accept_flags;
+ ramrod->tx_accept_flags = accept_flags;
+ ramrod->pstate = &vf->filter_state;
+ ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
+
+ set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
+ set_bit(RAMROD_RX, &ramrod->ramrod_flags);
+ set_bit(RAMROD_TX, &ramrod->ramrod_flags);
+
+ ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
+ ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+}
+
int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp,
struct bnx2x_virtf *vf,
struct bnx2x_vfop_cmd *cmd,
int qid, unsigned long accept_flags)
{
- struct bnx2x_vf_queue *vfq = vfq_get(vf, qid);
struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf);
if (vfop) {
struct bnx2x_rx_mode_ramrod_params *ramrod =
&vf->op_params.rx_mode;
- memset(ramrod, 0, sizeof(*ramrod));
-
- /* Prepare ramrod parameters */
- ramrod->cid = vfq->cid;
- ramrod->cl_id = vfq_cl_id(vf, vfq);
- ramrod->rx_mode_obj = &bp->rx_mode_obj;
- ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid);
-
- ramrod->rx_accept_flags = accept_flags;
- ramrod->tx_accept_flags = accept_flags;
- ramrod->pstate = &vf->filter_state;
- ramrod->state = BNX2X_FILTER_RX_MODE_PENDING;
-
- set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state);
- set_bit(RAMROD_RX, &ramrod->ramrod_flags);
- set_bit(RAMROD_TX, &ramrod->ramrod_flags);
-
- ramrod->rdata =
- bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2);
- ramrod->rdata_mapping =
- bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2);
+ bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags);
bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG,
bnx2x_vfop_rxmode, cmd->done);
@@ -3202,13 +3211,16 @@
bnx2x_iov_static_resc(bp, vf);
}
- /* prepare msix vectors in VF configuration space */
+ /* prepare msix vectors in VF configuration space - the value in the
+ * PCI configuration space should be the index of the last entry,
+ * namely one less than the actual size of the table
+ */
for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) {
bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx));
REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL,
- num_vf_queues);
+ num_vf_queues - 1);
DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n",
- vf_idx, num_vf_queues);
+ vf_idx, num_vf_queues - 1);
}
bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
@@ -3436,10 +3448,18 @@
int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
{
- struct bnx2x *bp = netdev_priv(dev);
- int rc, q_logical_state;
- struct bnx2x_virtf *vf = NULL;
+ struct bnx2x_queue_state_params q_params = {NULL};
+ struct bnx2x_vlan_mac_ramrod_params ramrod_param;
+ struct bnx2x_queue_update_params *update_params;
struct pf_vf_bulletin_content *bulletin = NULL;
+ struct bnx2x_rx_mode_ramrod_params rx_ramrod;
+ struct bnx2x *bp = netdev_priv(dev);
+ struct bnx2x_vlan_mac_obj *vlan_obj;
+ unsigned long vlan_mac_flags = 0;
+ unsigned long ramrod_flags = 0;
+ struct bnx2x_virtf *vf = NULL;
+ unsigned long accept_flags;
+ int rc;
/* sanity and init */
rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin);
@@ -3457,104 +3477,118 @@
/* update PF's copy of the VF's bulletin. No point in posting the vlan
* to the VF since it doesn't have anything to do with it. But it useful
* to store it here in case the VF is not up yet and we can only
- * configure the vlan later when it does.
+ * configure the vlan later when it does. Treat vlan id 0 as remove the
+ * Host tag.
*/
- bulletin->valid_bitmap |= 1 << VLAN_VALID;
+ if (vlan > 0)
+ bulletin->valid_bitmap |= 1 << VLAN_VALID;
+ else
+ bulletin->valid_bitmap &= ~(1 << VLAN_VALID);
bulletin->vlan = vlan;
/* is vf initialized and queue set up? */
- q_logical_state =
- bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj));
- if (vf->state == VF_ENABLED &&
- q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
- /* configure the vlan in device on this vf's queue */
- unsigned long ramrod_flags = 0;
- unsigned long vlan_mac_flags = 0;
- struct bnx2x_vlan_mac_obj *vlan_obj =
- &bnx2x_leading_vfq(vf, vlan_obj);
- struct bnx2x_vlan_mac_ramrod_params ramrod_param;
- struct bnx2x_queue_state_params q_params = {NULL};
- struct bnx2x_queue_update_params *update_params;
+ if (vf->state != VF_ENABLED ||
+ bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) !=
+ BNX2X_Q_LOGICAL_STATE_ACTIVE)
+ return rc;
- rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
- if (rc)
- return rc;
- memset(&ramrod_param, 0, sizeof(ramrod_param));
+ /* configure the vlan in device on this vf's queue */
+ vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj);
+ rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj));
+ if (rc)
+ return rc;
- /* must lock vfpf channel to protect against vf flows */
- bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+ /* must lock vfpf channel to protect against vf flows */
+ bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
- /* remove existing vlans */
- __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
- rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
- &ramrod_flags);
- if (rc) {
- BNX2X_ERR("failed to delete vlans\n");
- rc = -EINVAL;
- goto out;
- }
-
- /* send queue update ramrod to configure default vlan and silent
- * vlan removal
- */
- __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
- q_params.cmd = BNX2X_Q_CMD_UPDATE;
- q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
- update_params = &q_params.params.update;
- __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
- &update_params->update_flags);
- __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
- &update_params->update_flags);
-
- if (vlan == 0) {
- /* if vlan is 0 then we want to leave the VF traffic
- * untagged, and leave the incoming traffic untouched
- * (i.e. do not remove any vlan tags).
- */
- __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
- &update_params->update_flags);
- __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
- &update_params->update_flags);
- } else {
- /* configure the new vlan to device */
- __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
- ramrod_param.vlan_mac_obj = vlan_obj;
- ramrod_param.ramrod_flags = ramrod_flags;
- ramrod_param.user_req.u.vlan.vlan = vlan;
- ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
- rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
- if (rc) {
- BNX2X_ERR("failed to configure vlan\n");
- rc = -EINVAL;
- goto out;
- }
-
- /* configure default vlan to vf queue and set silent
- * vlan removal (the vf remains unaware of this vlan).
- */
- update_params = &q_params.params.update;
- __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
- &update_params->update_flags);
- __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
- &update_params->update_flags);
- update_params->def_vlan = vlan;
- }
-
- /* Update the Queue state */
- rc = bnx2x_queue_state_change(bp, &q_params);
- if (rc) {
- BNX2X_ERR("Failed to configure default VLAN\n");
- goto out;
- }
-
- /* clear the flag indicating that this VF needs its vlan
- * (will only be set if the HV configured the Vlan before vf was
- * up and we were called because the VF came up later
- */
-out:
- vf->cfg_flags &= ~VF_CFG_VLAN;
- bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+ /* remove existing vlans */
+ __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
+ &ramrod_flags);
+ if (rc) {
+ BNX2X_ERR("failed to delete vlans\n");
+ rc = -EINVAL;
+ goto out;
}
+
+ /* need to remove/add the VF's accept_any_vlan bit */
+ accept_flags = bnx2x_leading_vfq(vf, accept_flags);
+ if (vlan)
+ clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+ else
+ set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags);
+
+ bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf,
+ accept_flags);
+ bnx2x_leading_vfq(vf, accept_flags) = accept_flags;
+ bnx2x_config_rx_mode(bp, &rx_ramrod);
+
+ /* configure the new vlan to device */
+ memset(&ramrod_param, 0, sizeof(ramrod_param));
+ __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ ramrod_param.vlan_mac_obj = vlan_obj;
+ ramrod_param.ramrod_flags = ramrod_flags;
+ set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT,
+ &ramrod_param.user_req.vlan_mac_flags);
+ ramrod_param.user_req.u.vlan.vlan = vlan;
+ ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
+ rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
+ if (rc) {
+ BNX2X_ERR("failed to configure vlan\n");
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* send queue update ramrod to configure default vlan and silent
+ * vlan removal
+ */
+ __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+ q_params.cmd = BNX2X_Q_CMD_UPDATE;
+ q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj);
+ update_params = &q_params.params.update;
+ __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+ &update_params->update_flags);
+ __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+ &update_params->update_flags);
+ if (vlan == 0) {
+ /* if vlan is 0 then we want to leave the VF traffic
+ * untagged, and leave the incoming traffic untouched
+ * (i.e. do not remove any vlan tags).
+ */
+ __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+ &update_params->update_flags);
+ __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+ &update_params->update_flags);
+ } else {
+ /* configure default vlan to vf queue and set silent
+ * vlan removal (the vf remains unaware of this vlan).
+ */
+ __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+ &update_params->update_flags);
+ __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+ &update_params->update_flags);
+ update_params->def_vlan = vlan;
+ update_params->silent_removal_value =
+ vlan & VLAN_VID_MASK;
+ update_params->silent_removal_mask = VLAN_VID_MASK;
+ }
+
+ /* Update the Queue state */
+ rc = bnx2x_queue_state_change(bp, &q_params);
+ if (rc) {
+ BNX2X_ERR("Failed to configure default VLAN\n");
+ goto out;
+ }
+
+
+ /* clear the flag indicating that this VF needs its vlan
+ * (will only be set if the HV configured the Vlan before vf was
+ * up and we were called because the VF came up later
+ */
+out:
+ vf->cfg_flags &= ~VF_CFG_VLAN;
+ bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+
return rc;
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
index 1ff6a936..8c213fa52 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h
@@ -74,6 +74,7 @@
/* VLANs object */
struct bnx2x_vlan_mac_obj vlan_obj;
atomic_t vlan_count; /* 0 means vlan-0 is set ~ untagged */
+ unsigned long accept_flags; /* last accept flags configured */
/* Queue Slow-path State object */
struct bnx2x_queue_sp_obj sp_obj;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index 3dc2537..0756d7d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -1598,6 +1598,8 @@
if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) {
unsigned long accept = 0;
+ struct pf_vf_bulletin_content *bulletin =
+ BP_VF_BULLETIN(bp, vf->index);
/* covert VF-PF if mask to bnx2x accept flags */
if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST)
@@ -1617,9 +1619,11 @@
__set_bit(BNX2X_ACCEPT_BROADCAST, &accept);
/* A packet arriving the vf's mac should be accepted
- * with any vlan
+ * with any vlan, unless a vlan has already been
+ * configured.
*/
- __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
+ if (!(bulletin->valid_bitmap & (1 << VLAN_VALID)))
+ __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept);
/* set rx-mode */
rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd,
@@ -1710,6 +1714,21 @@
goto response;
}
}
+ /* if vlan was set by hypervisor we don't allow guest to config vlan */
+ if (bulletin->valid_bitmap & 1 << VLAN_VALID) {
+ int i;
+
+ /* search for vlan filters */
+ for (i = 0; i < filters->n_mac_vlan_filters; i++) {
+ if (filters->filters[i].flags &
+ VFPF_Q_FILTER_VLAN_TAG_VALID) {
+ BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n",
+ vf->abs_vfid);
+ vf->op_rc = -EPERM;
+ goto response;
+ }
+ }
+ }
/* verify vf_qid */
if (filters->vf_qid > vf_rxq_count(vf))
@@ -1805,6 +1824,9 @@
vf_op_params->rss_result_mask = rss_tlv->rss_result_mask;
/* flags handled individually for backward/forward compatability */
+ vf_op_params->rss_flags = 0;
+ vf_op_params->ramrod_flags = 0;
+
if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED)
__set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags);
if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR)