diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index 147231f..00c9a90 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -12,3 +12,13 @@
 	- info on the PCI subsystem for device driver authors
 pcieaer-howto.txt
 	- the PCI Express Advanced Error Reporting Driver Guide HOWTO
+endpoint/pci-endpoint.txt
+	- guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+	- guide to use configfs to configure the PCI endpoint function.
+endpoint/pci-test-function.txt
+	- specification of *PCI test* function device.
+endpoint/pci-test-howto.txt
+	- userguide for PCI endpoint test function.
+endpoint/function/binding/
+	- binding documentation for PCI endpoint function
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
new file mode 100644
index 0000000..3b68b95
--- /dev/null
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -0,0 +1,17 @@
+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid	 : should be 0x104c
+deviceid	 : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		 : don't care
+progif_code	 : don't care
+subclass_code	 : don't care
+baseclass_code	 : should be 0xff
+cache_line_size	 : don't care
+subsys_vendor_id : don't care
+subsys_id	 : don't care
+interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
+		   to test
diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.txt b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
new file mode 100644
index 0000000..d740f29
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.txt
@@ -0,0 +1,105 @@
+                   CONFIGURING PCI ENDPOINT USING CONFIGFS
+                    Kishon Vijay Abraham I <kishon@ti.com>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
+PCI endpoint function and to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer to [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+	mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs has two directories at its root: controllers and
+functions. Every EPC device present in the system will have an entry in
+the *controllers* directory and and every EPF driver present in the system
+will have an entry in the *functions* directory.
+
+/sys/kernel/config/pci_ep/
+	.. controllers/
+	.. functions/
+
+*) Creating EPF Device
+
+Every registered EPF driver will be listed in controllers directory. The
+entries corresponding to EPF driver will be created by the EPF core.
+
+/sys/kernel/config/pci_ep/functions/
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+		... <EPF Device 21>/
+	.. <EPF Driver2>/
+		... <EPF Device 12>/
+		... <EPF Device 22>/
+
+In order to create a <EPF device> of the type probed by <EPF Driver>, the
+user has to create a directory inside <EPF DriverN>.
+
+Every <EPF device> directory consists of the following entries that can be
+used to configure the standard configuration header of the endpoint function.
+(These entries are created by the framework when any new <EPF Device> is
+created)
+
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+			... vendorid
+			... deviceid
+			... revid
+			... progif_code
+			... subclass_code
+			... baseclass_code
+			... cache_line_size
+			... subsys_vendor_id
+			... subsys_id
+			... interrupt_pin
+
+*) EPC Device
+
+Every registered EPC device will be listed in controllers directory. The
+entries corresponding to EPC device will be created by the EPC core.
+
+/sys/kernel/config/pci_ep/controllers/
+	.. <EPC Device1>/
+		... <Symlink EPF Device11>/
+		... <Symlink EPF Device12>/
+		... start
+	.. <EPC Device2>/
+		... <Symlink EPF Device21>/
+		... <Symlink EPF Device22>/
+		... start
+
+The <EPC Device> directory will have a list of symbolic links to
+<EPF Device>. These symbolic links should be created by the user to
+represent the functions present in the endpoint device.
+
+The <EPC Device> directory will also have a *start* field. Once
+"1" is written to this field, the endpoint device will be ready to
+establish the link with the host. This is usually done after
+all the EPF devices are created and linked with the EPC device.
+
+
+			 | controllers/
+				| <Directory: EPC name>/
+					| <Symbolic Link: Function>
+					| start
+			 | functions/
+				| <Directory: EPF driver>/
+					| <Directory: EPF device>/
+						| vendorid
+						| deviceid
+						| revid
+						| progif_code
+						| subclass_code
+						| baseclass_code
+						| cache_line_size
+						| subsys_vendor_id
+						| subsys_id
+						| interrupt_pin
+						| function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt
new file mode 100644
index 0000000..9b1d668
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-endpoint.txt
@@ -0,0 +1,215 @@
+			    PCI ENDPOINT FRAMEWORK
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to use the PCI Endpoint Framework in order to create
+endpoint controller driver, endpoint function driver, and using configfs
+interface to bind the function driver to the controller driver.
+
+1. Introduction
+
+Linux has a comprehensive PCI subsystem to support PCI controllers that
+operates in Root Complex mode. The subsystem has capability to scan PCI bus,
+assign memory resources and IRQ resources, load PCI driver (based on
+vendor ID, device ID), support other services like hot-plug, power management,
+advanced error reporting and virtual channels.
+
+However the PCI controller IP integrated in some SoCs is capable of operating
+either in Root Complex mode or Endpoint mode. PCI Endpoint Framework will
+add endpoint mode support in Linux. This will help to run Linux in an
+EP system which can have a wide variety of use cases from testing or
+validation, co-processor accelerator, etc.
+
+2. PCI Endpoint Core
+
+The PCI Endpoint Core layer comprises 3 components: the Endpoint Controller
+library, the Endpoint Function library, and the configfs layer to bind the
+endpoint function with the endpoint controller.
+
+2.1 PCI Endpoint Controller(EPC) Library
+
+The EPC library provides APIs to be used by the controller that can operate
+in endpoint mode. It also provides APIs to be used by function driver/library
+in order to implement a particular endpoint function.
+
+2.1.1 APIs for the PCI controller Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI controller driver.
+
+*) devm_pci_epc_create()/pci_epc_create()
+
+   The PCI controller driver should implement the following ops:
+	 * write_header: ops to populate configuration space header
+	 * set_bar: ops to configure the BAR
+	 * clear_bar: ops to reset the BAR
+	 * alloc_addr_space: ops to allocate in PCI controller address space
+	 * free_addr_space: ops to free the allocated address space
+	 * raise_irq: ops to raise a legacy or MSI interrupt
+	 * start: ops to start the PCI link
+	 * stop: ops to stop the PCI link
+
+   The PCI controller driver can then create a new EPC device by invoking
+   devm_pci_epc_create()/pci_epc_create().
+
+*) devm_pci_epc_destroy()/pci_epc_destroy()
+
+   The PCI controller driver can destroy the EPC device created by either
+   devm_pci_epc_create() or pci_epc_create() using devm_pci_epc_destroy() or
+   pci_epc_destroy().
+
+*) pci_epc_linkup()
+
+   In order to notify all the function devices that the EPC device to which
+   they are linked has established a link with the host, the PCI controller
+   driver should invoke pci_epc_linkup().
+
+*) pci_epc_mem_init()
+
+   Initialize the pci_epc_mem structure used for allocating EPC addr space.
+
+*) pci_epc_mem_exit()
+
+   Cleanup the pci_epc_mem structure allocated during pci_epc_mem_init().
+
+2.1.2 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epc_write_header()
+
+   The PCI endpoint function driver should use pci_epc_write_header() to
+   write the standard configuration header to the endpoint controller.
+
+*) pci_epc_set_bar()
+
+   The PCI endpoint function driver should use pci_epc_set_bar() to configure
+   the Base Address Register in order for the host to assign PCI addr space.
+   Register space of the function driver is usually configured
+   using this API.
+
+*) pci_epc_clear_bar()
+
+   The PCI endpoint function driver should use pci_epc_clear_bar() to reset
+   the BAR.
+
+*) pci_epc_raise_irq()
+
+   The PCI endpoint function driver should use pci_epc_raise_irq() to raise
+   Legacy Interrupt or MSI Interrupt.
+
+*) pci_epc_mem_alloc_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_alloc_addr(), to
+   allocate memory address from EPC addr space which is required to access
+   RC's buffer
+
+*) pci_epc_mem_free_addr()
+
+   The PCI endpoint function driver should use pci_epc_mem_free_addr() to
+   free the memory space allocated using pci_epc_mem_alloc_addr().
+
+2.1.3 Other APIs
+
+There are other APIs provided by the EPC library. These are used for binding
+the EPF device with EPC device. pci-ep-cfs.c can be used as reference for
+using these APIs.
+
+*) pci_epc_get()
+
+   Get a reference to the PCI endpoint controller based on the device name of
+   the controller.
+
+*) pci_epc_put()
+
+   Release the reference to the PCI endpoint controller obtained using
+   pci_epc_get()
+
+*) pci_epc_add_epf()
+
+   Add a PCI endpoint function to a PCI endpoint controller. A PCIe device
+   can have up to 8 functions according to the specification.
+
+*) pci_epc_remove_epf()
+
+   Remove the PCI endpoint function from PCI endpoint controller.
+
+*) pci_epc_start()
+
+   The PCI endpoint function driver should invoke pci_epc_start() once it
+   has configured the endpoint function and wants to start the PCI link.
+
+*) pci_epc_stop()
+
+   The PCI endpoint function driver should invoke pci_epc_stop() to stop
+   the PCI LINK.
+
+2.2 PCI Endpoint Function(EPF) Library
+
+The EPF library provides APIs to be used by the function driver and the EPC
+library to provide endpoint mode functionality.
+
+2.2.1 APIs for the PCI Endpoint Function Driver
+
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint function driver.
+
+*) pci_epf_register_driver()
+
+   The PCI Endpoint Function driver should implement the following ops:
+	 * bind: ops to perform when a EPC device has been bound to EPF device
+	 * unbind: ops to perform when a binding has been lost between a EPC
+	   device and EPF device
+	 * linkup: ops to perform when the EPC device has established a
+	   connection with a host system
+
+  The PCI Function driver can then register the PCI EPF driver by using
+  pci_epf_register_driver().
+
+*) pci_epf_unregister_driver()
+
+  The PCI Function driver can unregister the PCI EPF driver by using
+  pci_epf_unregister_driver().
+
+*) pci_epf_alloc_space()
+
+  The PCI Function driver can allocate space for a particular BAR using
+  pci_epf_alloc_space().
+
+*) pci_epf_free_space()
+
+  The PCI Function driver can free the allocated space
+  (using pci_epf_alloc_space) by invoking pci_epf_free_space().
+
+2.2.2 APIs for the PCI Endpoint Controller Library
+This section lists the APIs that the PCI Endpoint core provides to be used
+by the PCI endpoint controller library.
+
+*) pci_epf_linkup()
+
+   The PCI endpoint controller library invokes pci_epf_linkup() when the
+   EPC device has established the connection to the host.
+
+2.2.2 Other APIs
+There are other APIs provided by the EPF library. These are used to notify
+the function driver when the EPF device is bound to the EPC device.
+pci-ep-cfs.c can be used as reference for using these APIs.
+
+*) pci_epf_create()
+
+   Create a new PCI EPF device by passing the name of the PCI EPF device.
+   This name will be used to bind the the EPF device to a EPF driver.
+
+*) pci_epf_destroy()
+
+   Destroy the created PCI EPF device.
+
+*) pci_epf_bind()
+
+   pci_epf_bind() should be invoked when the EPF device has been bound to
+   a EPC device.
+
+*) pci_epf_unbind()
+
+   pci_epf_unbind() should be invoked when the binding between EPC device
+   and EPF device is lost.
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
new file mode 100644
index 0000000..0c519c9
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -0,0 +1,66 @@
+				PCI TEST
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+Traditionally PCI RC has always been validated by using standard
+PCI cards like ethernet PCI cards or USB PCI cards or SATA PCI cards.
+However with the addition of EP-core in linux kernel, it is possible
+to configure a PCI controller that can operate in EP mode to work as
+a test device.
+
+The PCI endpoint test device is a virtual device (defined in software)
+used to test the endpoint functionality and serve as a sample driver
+for other PCI endpoint devices (to use the EP framework).
+
+The PCI endpoint test device has the following registers:
+
+	1) PCI_ENDPOINT_TEST_MAGIC
+	2) PCI_ENDPOINT_TEST_COMMAND
+	3) PCI_ENDPOINT_TEST_STATUS
+	4) PCI_ENDPOINT_TEST_SRC_ADDR
+	5) PCI_ENDPOINT_TEST_DST_ADDR
+	6) PCI_ENDPOINT_TEST_SIZE
+	7) PCI_ENDPOINT_TEST_CHECKSUM
+
+*) PCI_ENDPOINT_TEST_MAGIC
+
+This register will be used to test BAR0. A known pattern will be written
+and read back from MAGIC register to verify BAR0.
+
+*) PCI_ENDPOINT_TEST_COMMAND:
+
+This register will be used by the host driver to indicate the function
+that the endpoint device must perform.
+
+Bitfield Description:
+  Bit 0		: raise legacy IRQ
+  Bit 1		: raise MSI IRQ
+  Bit 2 - 7	: MSI interrupt number
+  Bit 8		: read command (read data from RC buffer)
+  Bit 9		: write command (write data to RC buffer)
+  Bit 10	: copy command (copy data from one RC buffer to another
+		  RC buffer)
+
+*) PCI_ENDPOINT_TEST_STATUS
+
+This register reflects the status of the PCI endpoint device.
+
+Bitfield Description:
+  Bit 0		: read success
+  Bit 1		: read fail
+  Bit 2		: write success
+  Bit 3		: write fail
+  Bit 4		: copy success
+  Bit 5		: copy fail
+  Bit 6		: IRQ raised
+  Bit 7		: source address is invalid
+  Bit 8		: destination address is invalid
+
+*) PCI_ENDPOINT_TEST_SRC_ADDR
+
+This register contains the source address (RC buffer address) for the
+COPY/READ command.
+
+*) PCI_ENDPOINT_TEST_DST_ADDR
+
+This register contains the destination address (RC buffer address) for
+the COPY/WRITE command.
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
new file mode 100644
index 0000000..75f48c3
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -0,0 +1,179 @@
+			    PCI TEST USERGUIDE
+		    Kishon Vijay Abraham I <kishon@ti.com>
+
+This document is a guide to help users use pci-epf-test function driver
+and pci_endpoint_test host driver for testing PCI. The list of steps to
+be followed in the host side and EP side is given below.
+
+1. Endpoint Device
+
+1.1 Endpoint Controller Devices
+
+To find the list of endpoint controller devices in the system:
+
+	# ls /sys/class/pci_epc/
+	  51000000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/controllers
+	  51000000.pcie_ep
+
+1.2 Endpoint Function Drivers
+
+To find the list of endpoint function drivers in the system:
+
+	# ls /sys/bus/pci-epf/drivers
+	  pci_epf_test
+
+If PCI_ENDPOINT_CONFIGFS is enabled
+	# ls /sys/kernel/config/pci_ep/functions
+	  pci_epf_test
+
+1.3 Creating pci-epf-test Device
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-test device, the following commands can be used
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_test/func1
+
+The "mkdir func1" above creates the pci-epf-test function device that will
+be probed by pci_epf_test driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields.
+
+	# ls functions/pci_epf_test/func1
+	  baseclass_code	interrupt_pin	revid		subsys_vendor_id
+	  cache_line_size	msi_interrupts	subclass_code	vendorid
+	  deviceid          	progif_code	subsys_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-test driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001
+
+	# cat functions/pci_epf_test/func1/vendorid
+	  0xffff
+	# cat functions/pci_epf_test/func1/interrupt_pin
+	  0x0001
+
+1.4 Configuring pci-epf-test Device
+
+The user can configure the pci-epf-test device using configfs entry. In order
+to change the vendorid and the number of MSI interrupts used by the function
+device, the following commands can be used.
+
+	# echo 0x104c > functions/pci_epf_test/func1/vendorid
+	# echo 0xb500 > functions/pci_epf_test/func1/deviceid
+	# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+
+1.5 Binding pci-epf-test Device to EP Controller
+
+In order for the endpoint function device to be useful, it has to be bound to
+a PCI endpoint controller driver. Use the configfs to bind the function
+device to one of the controller driver present in the system.
+
+	# ln -s functions/pci_epf_test/func1 controllers/51000000.pcie_ep/
+
+Once the above step is completed, the PCI endpoint is ready to establish a link
+with the host.
+
+1.6 Start the Link
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'.
+
+	# echo 1 > controllers/51000000.pcie_ep/start
+
+2. RootComplex Device
+
+2.1 lspci Output
+
+Note that the devices listed here correspond to the value populated in 1.4 above
+
+	00:00.0 PCI bridge: Texas Instruments Device 8888 (rev 01)
+	01:00.0 Unassigned class [ff00]: Texas Instruments Device b500
+
+2.2 Using Endpoint Test function Device
+
+pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint
+tests. Before pcitest.sh can be used pcitest.c should be compiled using the
+following commands.
+
+	cd <kernel-dir>
+	make headers_install ARCH=arm
+	arm-linux-gnueabihf-gcc -Iusr/include tools/pci/pcitest.c -o pcitest
+	cp pcitest  <rootfs>/usr/sbin/
+	cp tools/pci/pcitest.sh <rootfs>
+
+2.2.1 pcitest.sh Output
+	# ./pcitest.sh
+	BAR tests
+
+	BAR0:           OKAY
+	BAR1:           OKAY
+	BAR2:           OKAY
+	BAR3:           OKAY
+	BAR4:           NOT OKAY
+	BAR5:           NOT OKAY
+
+	Interrupt tests
+
+	LEGACY IRQ:     NOT OKAY
+	MSI1:           OKAY
+	MSI2:           OKAY
+	MSI3:           OKAY
+	MSI4:           OKAY
+	MSI5:           OKAY
+	MSI6:           OKAY
+	MSI7:           OKAY
+	MSI8:           OKAY
+	MSI9:           OKAY
+	MSI10:          OKAY
+	MSI11:          OKAY
+	MSI12:          OKAY
+	MSI13:          OKAY
+	MSI14:          OKAY
+	MSI15:          OKAY
+	MSI16:          OKAY
+	MSI17:          NOT OKAY
+	MSI18:          NOT OKAY
+	MSI19:          NOT OKAY
+	MSI20:          NOT OKAY
+	MSI21:          NOT OKAY
+	MSI22:          NOT OKAY
+	MSI23:          NOT OKAY
+	MSI24:          NOT OKAY
+	MSI25:          NOT OKAY
+	MSI26:          NOT OKAY
+	MSI27:          NOT OKAY
+	MSI28:          NOT OKAY
+	MSI29:          NOT OKAY
+	MSI30:          NOT OKAY
+	MSI31:          NOT OKAY
+	MSI32:          NOT OKAY
+
+	Read Tests
+
+	READ (      1 bytes):           OKAY
+	READ (   1024 bytes):           OKAY
+	READ (   1025 bytes):           OKAY
+	READ (1024000 bytes):           OKAY
+	READ (1024001 bytes):           OKAY
+
+	Write Tests
+
+	WRITE (      1 bytes):          OKAY
+	WRITE (   1024 bytes):          OKAY
+	WRITE (   1025 bytes):          OKAY
+	WRITE (1024000 bytes):          OKAY
+	WRITE (1024001 bytes):          OKAY
+
+	Copy Tests
+
+	COPY (      1 bytes):           OKAY
+	COPY (   1024 bytes):           OKAY
+	COPY (   1025 bytes):           OKAY
+	COPY (1024000 bytes):           OKAY
+	COPY (1024001 bytes):           OKAY
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 1392c70..b2480dd 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -6,30 +6,40 @@
 - reg-names: Must be "config" for the PCIe configuration space.
     (The old way of getting the configuration address space from "ranges"
     is deprecated and should be avoided.)
+- num-lanes: number of lanes to use
+RC mode:
 - #address-cells: set to <3>
 - #size-cells: set to <2>
 - device_type: set to "pci"
 - ranges: ranges for the PCI memory and I/O regions
 - #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI properties
-	to define the mapping of the PCIe interface to interrupt
+- interrupt-map-mask and interrupt-map: standard PCI
+	properties to define the mapping of the PCIe interface to interrupt
 	numbers.
-- num-lanes: number of lanes to use
+EP mode:
+- num-ib-windows: number of inbound address translation
+        windows
+- num-ob-windows: number of outbound address translation
+        windows
 
 Optional properties:
-- num-viewport: number of view ports configured in hardware.  If a platform
-  does not specify it, the driver assumes 2.
 - num-lanes: number of lanes to use (this property should be specified unless
   the link is brought already up in BIOS)
 - reset-gpio: gpio pin number of power good signal
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
-  specify this property, to keep backwards compatibility a range of 0x00-0xff
-  is assumed if not present)
 - clocks: Must contain an entry for each entry in clock-names.
 	See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
 	- "pcie"
 	- "pcie_bus"
+RC mode:
+- num-viewport: number of view ports configured in
+  hardware. If a platform does not specify it, the driver assumes 2.
+- bus-range: PCI bus numbers covered (it is recommended
+  for new devicetrees to specify this property, to keep backwards
+  compatibility a range of 0x00-0xff is assumed if not present)
+EP mode:
+- max-functions: maximum number of functions that can be
+  configured
 
 Example configuration:
 
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
new file mode 100644
index 0000000..35d4a97
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt
@@ -0,0 +1,129 @@
+Faraday Technology FTPCI100 PCI Host Bridge
+
+This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+is a generic IP block from Faraday Technology. It exists in two variants:
+plain and dual PCI. The plain version embeds a cascading interrupt controller
+into the host bridge. The dual version routes the interrupts to the host
+chips interrupt controller.
+
+The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+Technology) and product ID 0x4321.
+
+Mandatory properties:
+
+- compatible: ranging from specific to generic, should be one of
+  "cortina,gemini-pci", "faraday,ftpci100"
+  "cortina,gemini-pci-dual", "faraday,ftpci100-dual"
+  "faraday,ftpci100"
+  "faraday,ftpci100-dual"
+- reg: memory base and size for the host bridge
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- bus-range: set to <0x00 0xff>
+- device_type, set to "pci"
+- ranges: see pci.txt
+- interrupt-map-mask: see pci.txt
+- interrupt-map: see pci.txt
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+  be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+  128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+  pre-fetchable.
+
+Mandatory subnodes:
+- For "faraday,ftpci100" a node representing the interrupt-controller inside the
+  host bridge is mandatory. It has the following mandatory properties:
+  - interrupt: see interrupt-controller/interrupts.txt
+  - interrupt-parent: see interrupt-controller/interrupts.txt
+  - interrupt-controller: see interrupt-controller/interrupts.txt
+  - #address-cells: set to <0>
+  - #interrupt-cells: set to <1>
+
+I/O space considerations:
+
+The plain variant has 128MiB of non-prefetchable memory space, whereas the
+"dual" variant has 64MiB. Take this into account when describing the ranges.
+
+Interrupt map considerations:
+
+The "dual" variant will get INT A, B, C, D from the system interrupt controller
+and should point to respective interrupt in that controller in its
+interrupt-map.
+
+The code which is the only documentation of how the Faraday PCI (the non-dual
+variant) interrupts assigns the default interrupt mapping/swizzling has
+typically been like this, doing the swizzling on the interrupt controller side
+rather than in the interconnect:
+
+interrupt-map-mask = <0xf800 0 0 7>;
+interrupt-map =
+	<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+	<0x4800 0 0 2 &pci_intc 1>,
+	<0x4800 0 0 3 &pci_intc 2>,
+	<0x4800 0 0 4 &pci_intc 3>,
+	<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+	<0x5000 0 0 2 &pci_intc 2>,
+	<0x5000 0 0 3 &pci_intc 3>,
+	<0x5000 0 0 4 &pci_intc 0>,
+	<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+	<0x5800 0 0 2 &pci_intc 3>,
+	<0x5800 0 0 3 &pci_intc 0>,
+	<0x5800 0 0 4 &pci_intc 1>,
+	<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+	<0x6000 0 0 2 &pci_intc 0>,
+	<0x6000 0 0 3 &pci_intc 1>,
+	<0x6000 0 0 4 &pci_intc 2>;
+
+Example:
+
+pci@50000000 {
+	compatible = "cortina,gemini-pci", "faraday,ftpci100";
+	reg = <0x50000000 0x100>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
+			<26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
+			<27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
+			<28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+
+	bus-range = <0x00 0xff>;
+	ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+		 <0x01000000 0 0          0x50000000 0 0x00100000>,
+		 /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+		 <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+	/* DMA ranges */
+	dma-ranges =
+	/* 128MiB at 0x00000000-0x07ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+	/* 64MiB at 0x00000000-0x03ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+	/* 64MiB at 0x00000000-0x03ffffff */
+	<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+	interrupt-map-mask = <0xf800 0 0 7>;
+	interrupt-map =
+		<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+		<0x4800 0 0 2 &pci_intc 1>,
+		<0x4800 0 0 3 &pci_intc 2>,
+		<0x4800 0 0 4 &pci_intc 3>,
+		<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+		<0x5000 0 0 2 &pci_intc 2>,
+		<0x5000 0 0 3 &pci_intc 3>,
+		<0x5000 0 0 4 &pci_intc 0>,
+		<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+		<0x5800 0 0 2 &pci_intc 3>,
+		<0x5800 0 0 3 &pci_intc 0>,
+		<0x5800 0 0 4 &pci_intc 1>,
+		<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+		<0x6000 0 0 2 &pci_intc 0>,
+		<0x6000 0 0 3 &pci_intc 0>,
+		<0x6000 0 0 4 &pci_intc 0>;
+	pci_intc: interrupt-controller {
+		interrupt-parent = <&intcon>;
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 60e2516..6a07c96 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,17 +1,22 @@
 TI PCI Controllers
 
 PCIe Designware Controller
- - compatible: Should be "ti,dra7-pcie""
- - reg : Two register ranges as listed in the reg-names property
- - reg-names : The first entry must be "ti-conf" for the TI specific registers
-	       The second entry must be "rc-dbics" for the designware pcie
-	       registers
-	       The third entry must be "config" for the PCIe configuration space
+ - compatible: Should be "ti,dra7-pcie" for RC
+	       Should be "ti,dra7-pcie-ep" for EP
  - phys : list of PHY specifiers (used by generic PHY framework)
  - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
 	       number of PHYs as specified in *phys* property.
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../designware-pcie.txt
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI specific registers
+	       The second entry must be "rc-dbics" for the DesignWare PCIe
+	       registers
+	       The third entry must be "config" for the PCIe configuration space
  - interrupts : Two interrupt entries must be specified. The first one is for
 		main interrupt line and the second for MSI interrupt line.
  - #address-cells,
@@ -19,13 +24,36 @@
    #interrupt-cells,
    device_type,
    ranges,
-   num-lanes,
    interrupt-map-mask,
    interrupt-map : as specified in ../designware-pcie.txt
 
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI specific registers
+	       "ep_dbics" for the standard configuration registers as
+		they are locally accessed within the DIF CS space
+	       "ep_dbics2" for the standard configuration registers as
+		they are locally accessed within the DIF CS2 space
+	       "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+			       should contain the register offset within syscon
+			       and the 2nd argument should contain the bit field
+			       for setting the bit to enable unaligned
+			       access.
+
 Optional Property:
  - gpios : Should be added if a gpio line is required to drive PERST# line
 
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
 Example:
 axi {
 	compatible = "simple-bus";
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
new file mode 100644
index 0000000..4ebc359
--- /dev/null
+++ b/Documentation/misc-devices/pci-endpoint-test.txt
@@ -0,0 +1,35 @@
+Driver for PCI Endpoint Test Function
+
+This driver should be used as a host side driver if the root complex is
+connected to a configurable PCI endpoint running *pci_epf_test* function
+driver configured according to [1].
+
+The "pci_endpoint_test" driver can be used to perform the following tests.
+
+The PCI driver for the test device performs the following tests
+	*) verifying addresses programmed in BAR
+	*) raise legacy IRQ
+	*) raise MSI IRQ
+	*) read data
+	*) write data
+	*) copy data
+
+This misc driver creates /dev/pci-endpoint-test.<num> for every
+*pci_epf_test* function connected to the root complex and "ioctls"
+should be used to perform the above tests.
+
+ioctl
+-----
+ PCITEST_BAR: Tests the BAR. The number of the BAR to be tested
+	      should be passed as argument.
+ PCITEST_LEGACY_IRQ: Tests legacy IRQ
+ PCITEST_MSI: Tests message signalled interrupts. The MSI number
+	      to be tested should be passed as argument.
+ PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
+		as argument.
+ PCITEST_READ: Perform read tests. The size of the buffer should be passed
+	       as argument.
+ PCITEST_COPY: Perform read tests. The size of the buffer should be passed
+	       as argument.
+
+[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index c265a5f..15ed843 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9581,6 +9581,15 @@
 F:	arch/x86/pci/
 F:	arch/x86/kernel/quirks.c
 
+PCI ENDPOINT SUBSYSTEM
+M:	Kishon Vijay Abraham I <kishon@ti.com>
+L:	linux-pci@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git
+S:	Supported
+F:	drivers/pci/endpoint/
+F:	drivers/misc/pci_endpoint_test.c
+F:	tools/pci/
+
 PCI DRIVER FOR ALTERA PCIE IP
 M:	Ley Foon Tan <lftan@altera.com>
 L:	rfi@lists.rocketboards.org (moderated for non-subscribers)
diff --git a/arch/arm/mach-omap2/clockdomains7xx_data.c b/arch/arm/mach-omap2/clockdomains7xx_data.c
index 6c67965..67ebff8 100644
--- a/arch/arm/mach-omap2/clockdomains7xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains7xx_data.c
@@ -524,7 +524,7 @@ static struct clockdomain pcie_7xx_clkdm = {
 	.dep_bit	  = DRA7XX_PCIE_STATDEP_SHIFT,
 	.wkdep_srcs	  = pcie_wkup_sleep_deps,
 	.sleepdep_srcs	  = pcie_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain atl_7xx_clkdm = {
diff --git a/drivers/Makefile b/drivers/Makefile
index 2eced9a..a5f8e43 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -14,7 +14,9 @@
 obj-$(CONFIG_PINCTRL)		+= pinctrl/
 obj-$(CONFIG_GPIOLIB)		+= gpio/
 obj-y				+= pwm/
+
 obj-$(CONFIG_PCI)		+= pci/
+obj-$(CONFIG_PCI_ENDPOINT)	+= pci/endpoint/
 # PCI dwc controller drivers
 obj-y				+= pci/dwc/
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index c290990..527b115 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -771,6 +771,13 @@
 
 endif # PANEL
 
+config PCI_ENDPOINT_TEST
+	depends on PCI
+	tristate "PCI Endpoint Test driver"
+	---help---
+           Enable this configuration option to enable the host side test driver
+           for PCI Endpoint.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7a3ea89..6e139cd 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -54,6 +54,7 @@
 obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_PANEL)             += panel.o
+obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
new file mode 100644
index 0000000..09c10f4
--- /dev/null
+++ b/drivers/misc/pci_endpoint_test.c
@@ -0,0 +1,534 @@
+/**
+ * Host side test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <linux/pci_regs.h>
+
+#include <uapi/linux/pcitest.h>
+
+#define DRV_MODULE_NAME			"pci-endpoint-test"
+
+#define PCI_ENDPOINT_TEST_MAGIC		0x0
+
+#define PCI_ENDPOINT_TEST_COMMAND	0x4
+#define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
+#define COMMAND_RAISE_MSI_IRQ		BIT(1)
+#define MSI_NUMBER_SHIFT		2
+/* 6 bits for MSI number */
+#define COMMAND_READ                    BIT(8)
+#define COMMAND_WRITE                   BIT(9)
+#define COMMAND_COPY                    BIT(10)
+
+#define PCI_ENDPOINT_TEST_STATUS	0x8
+#define STATUS_READ_SUCCESS             BIT(0)
+#define STATUS_READ_FAIL                BIT(1)
+#define STATUS_WRITE_SUCCESS            BIT(2)
+#define STATUS_WRITE_FAIL               BIT(3)
+#define STATUS_COPY_SUCCESS             BIT(4)
+#define STATUS_COPY_FAIL                BIT(5)
+#define STATUS_IRQ_RAISED               BIT(6)
+#define STATUS_SRC_ADDR_INVALID         BIT(7)
+#define STATUS_DST_ADDR_INVALID         BIT(8)
+
+#define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR	0xc
+#define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR	0x10
+
+#define PCI_ENDPOINT_TEST_LOWER_DST_ADDR	0x14
+#define PCI_ENDPOINT_TEST_UPPER_DST_ADDR	0x18
+
+#define PCI_ENDPOINT_TEST_SIZE		0x1c
+#define PCI_ENDPOINT_TEST_CHECKSUM	0x20
+
+static DEFINE_IDA(pci_endpoint_test_ida);
+
+#define to_endpoint_test(priv) container_of((priv), struct pci_endpoint_test, \
+					    miscdev)
+enum pci_barno {
+	BAR_0,
+	BAR_1,
+	BAR_2,
+	BAR_3,
+	BAR_4,
+	BAR_5,
+};
+
+struct pci_endpoint_test {
+	struct pci_dev	*pdev;
+	void __iomem	*base;
+	void __iomem	*bar[6];
+	struct completion irq_raised;
+	int		last_irq;
+	/* mutex to protect the ioctls */
+	struct mutex	mutex;
+	struct miscdevice miscdev;
+};
+
+static int bar_size[] = { 4, 512, 1024, 16384, 131072, 1048576 };
+
+static inline u32 pci_endpoint_test_readl(struct pci_endpoint_test *test,
+					  u32 offset)
+{
+	return readl(test->base + offset);
+}
+
+static inline void pci_endpoint_test_writel(struct pci_endpoint_test *test,
+					    u32 offset, u32 value)
+{
+	writel(value, test->base + offset);
+}
+
+static inline u32 pci_endpoint_test_bar_readl(struct pci_endpoint_test *test,
+					      int bar, int offset)
+{
+	return readl(test->bar[bar] + offset);
+}
+
+static inline void pci_endpoint_test_bar_writel(struct pci_endpoint_test *test,
+						int bar, u32 offset, u32 value)
+{
+	writel(value, test->bar[bar] + offset);
+}
+
+static irqreturn_t pci_endpoint_test_irqhandler(int irq, void *dev_id)
+{
+	struct pci_endpoint_test *test = dev_id;
+	u32 reg;
+
+	reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+	if (reg & STATUS_IRQ_RAISED) {
+		test->last_irq = irq;
+		complete(&test->irq_raised);
+		reg &= ~STATUS_IRQ_RAISED;
+	}
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS,
+				 reg);
+
+	return IRQ_HANDLED;
+}
+
+static bool pci_endpoint_test_bar(struct pci_endpoint_test *test,
+				  enum pci_barno barno)
+{
+	int j;
+	u32 val;
+	int size;
+
+	if (!test->bar[barno])
+		return false;
+
+	size = bar_size[barno];
+
+	for (j = 0; j < size; j += 4)
+		pci_endpoint_test_bar_writel(test, barno, j, 0xA0A0A0A0);
+
+	for (j = 0; j < size; j += 4) {
+		val = pci_endpoint_test_bar_readl(test, barno, j);
+		if (val != 0xA0A0A0A0)
+			return false;
+	}
+
+	return true;
+}
+
+static bool pci_endpoint_test_legacy_irq(struct pci_endpoint_test *test)
+{
+	u32 val;
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 COMMAND_RAISE_LEGACY_IRQ);
+	val = wait_for_completion_timeout(&test->irq_raised,
+					  msecs_to_jiffies(1000));
+	if (!val)
+		return false;
+
+	return true;
+}
+
+static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
+				      u8 msi_num)
+{
+	u32 val;
+	struct pci_dev *pdev = test->pdev;
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 msi_num << MSI_NUMBER_SHIFT |
+				 COMMAND_RAISE_MSI_IRQ);
+	val = wait_for_completion_timeout(&test->irq_raised,
+					  msecs_to_jiffies(1000));
+	if (!val)
+		return false;
+
+	if (test->last_irq - pdev->irq == msi_num - 1)
+		return true;
+
+	return false;
+}
+
+static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	void *src_addr;
+	void *dst_addr;
+	dma_addr_t src_phys_addr;
+	dma_addr_t dst_phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 src_crc32;
+	u32 dst_crc32;
+
+	src_addr = dma_alloc_coherent(dev, size, &src_phys_addr, GFP_KERNEL);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate source buffer\n");
+		ret = false;
+		goto err;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+				 lower_32_bits(src_phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+				 upper_32_bits(src_phys_addr));
+
+	get_random_bytes(src_addr, size);
+	src_crc32 = crc32_le(~0, src_addr, size);
+
+	dst_addr = dma_alloc_coherent(dev, size, &dst_phys_addr, GFP_KERNEL);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		ret = false;
+		goto err_src_addr;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+				 lower_32_bits(dst_phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+				 upper_32_bits(dst_phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE,
+				 size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_COPY);
+
+	wait_for_completion(&test->irq_raised);
+
+	dst_crc32 = crc32_le(~0, dst_addr, size);
+	if (dst_crc32 == src_crc32)
+		ret = true;
+
+	dma_free_coherent(dev, size, dst_addr, dst_phys_addr);
+
+err_src_addr:
+	dma_free_coherent(dev, size, src_addr, src_phys_addr);
+
+err:
+	return ret;
+}
+
+static bool pci_endpoint_test_write(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	u32 reg;
+	void *addr;
+	dma_addr_t phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 crc32;
+
+	addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!addr) {
+		dev_err(dev, "failed to allocate address\n");
+		ret = false;
+		goto err;
+	}
+
+	get_random_bytes(addr, size);
+
+	crc32 = crc32_le(~0, addr, size);
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_CHECKSUM,
+				 crc32);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_SRC_ADDR,
+				 lower_32_bits(phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_SRC_ADDR,
+				 upper_32_bits(phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_READ);
+
+	wait_for_completion(&test->irq_raised);
+
+	reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
+	if (reg & STATUS_READ_SUCCESS)
+		ret = true;
+
+	dma_free_coherent(dev, size, addr, phys_addr);
+
+err:
+	return ret;
+}
+
+static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t size)
+{
+	bool ret = false;
+	void *addr;
+	dma_addr_t phys_addr;
+	struct pci_dev *pdev = test->pdev;
+	struct device *dev = &pdev->dev;
+	u32 crc32;
+
+	addr = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		ret = false;
+		goto err;
+	}
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_LOWER_DST_ADDR,
+				 lower_32_bits(phys_addr));
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_UPPER_DST_ADDR,
+				 upper_32_bits(phys_addr));
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_SIZE, size);
+
+	pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_COMMAND,
+				 1 << MSI_NUMBER_SHIFT | COMMAND_WRITE);
+
+	wait_for_completion(&test->irq_raised);
+
+	crc32 = crc32_le(~0, addr, size);
+	if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM))
+		ret = true;
+
+	dma_free_coherent(dev, size, addr, phys_addr);
+err:
+	return ret;
+}
+
+static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
+				    unsigned long arg)
+{
+	int ret = -EINVAL;
+	enum pci_barno bar;
+	struct pci_endpoint_test *test = to_endpoint_test(file->private_data);
+
+	mutex_lock(&test->mutex);
+	switch (cmd) {
+	case PCITEST_BAR:
+		bar = arg;
+		if (bar < 0 || bar > 5)
+			goto ret;
+		ret = pci_endpoint_test_bar(test, bar);
+		break;
+	case PCITEST_LEGACY_IRQ:
+		ret = pci_endpoint_test_legacy_irq(test);
+		break;
+	case PCITEST_MSI:
+		ret = pci_endpoint_test_msi_irq(test, arg);
+		break;
+	case PCITEST_WRITE:
+		ret = pci_endpoint_test_write(test, arg);
+		break;
+	case PCITEST_READ:
+		ret = pci_endpoint_test_read(test, arg);
+		break;
+	case PCITEST_COPY:
+		ret = pci_endpoint_test_copy(test, arg);
+		break;
+	}
+
+ret:
+	mutex_unlock(&test->mutex);
+	return ret;
+}
+
+static const struct file_operations pci_endpoint_test_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = pci_endpoint_test_ioctl,
+};
+
+static int pci_endpoint_test_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *ent)
+{
+	int i;
+	int err;
+	int irq;
+	int id;
+	char name[20];
+	enum pci_barno bar;
+	void __iomem *base;
+	struct device *dev = &pdev->dev;
+	struct pci_endpoint_test *test;
+	struct miscdevice *misc_device;
+
+	if (pci_is_bridge(pdev))
+		return -ENODEV;
+
+	test = devm_kzalloc(dev, sizeof(*test), GFP_KERNEL);
+	if (!test)
+		return -ENOMEM;
+
+	test->pdev = pdev;
+	init_completion(&test->irq_raised);
+	mutex_init(&test->mutex);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		dev_err(dev, "Cannot enable PCI device\n");
+		return err;
+	}
+
+	err = pci_request_regions(pdev, DRV_MODULE_NAME);
+	if (err) {
+		dev_err(dev, "Cannot obtain PCI resources\n");
+		goto err_disable_pdev;
+	}
+
+	pci_set_master(pdev);
+
+	irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
+	if (irq < 0)
+		dev_err(dev, "failed to get MSI interrupts\n");
+
+	err = devm_request_irq(dev, pdev->irq, pci_endpoint_test_irqhandler,
+			       IRQF_SHARED, DRV_MODULE_NAME, test);
+	if (err) {
+		dev_err(dev, "failed to request IRQ %d\n", pdev->irq);
+		goto err_disable_msi;
+	}
+
+	for (i = 1; i < irq; i++) {
+		err = devm_request_irq(dev, pdev->irq + i,
+				       pci_endpoint_test_irqhandler,
+				       IRQF_SHARED, DRV_MODULE_NAME, test);
+		if (err)
+			dev_err(dev, "failed to request IRQ %d for MSI %d\n",
+				pdev->irq + i, i + 1);
+	}
+
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		base = pci_ioremap_bar(pdev, bar);
+		if (!base) {
+			dev_err(dev, "failed to read BAR%d\n", bar);
+			WARN_ON(bar == BAR_0);
+		}
+		test->bar[bar] = base;
+	}
+
+	test->base = test->bar[0];
+	if (!test->base) {
+		dev_err(dev, "Cannot perform PCI test without BAR0\n");
+		goto err_iounmap;
+	}
+
+	pci_set_drvdata(pdev, test);
+
+	id = ida_simple_get(&pci_endpoint_test_ida, 0, 0, GFP_KERNEL);
+	if (id < 0) {
+		dev_err(dev, "unable to get id\n");
+		goto err_iounmap;
+	}
+
+	snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
+	misc_device = &test->miscdev;
+	misc_device->minor = MISC_DYNAMIC_MINOR;
+	misc_device->name = name;
+	misc_device->fops = &pci_endpoint_test_fops,
+
+	err = misc_register(misc_device);
+	if (err) {
+		dev_err(dev, "failed to register device\n");
+		goto err_ida_remove;
+	}
+
+	return 0;
+
+err_ida_remove:
+	ida_simple_remove(&pci_endpoint_test_ida, id);
+
+err_iounmap:
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (test->bar[bar])
+			pci_iounmap(pdev, test->bar[bar]);
+	}
+
+err_disable_msi:
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+
+err_disable_pdev:
+	pci_disable_device(pdev);
+
+	return err;
+}
+
+static void pci_endpoint_test_remove(struct pci_dev *pdev)
+{
+	int id;
+	enum pci_barno bar;
+	struct pci_endpoint_test *test = pci_get_drvdata(pdev);
+	struct miscdevice *misc_device = &test->miscdev;
+
+	if (sscanf(misc_device->name, DRV_MODULE_NAME ".%d", &id) != 1)
+		return;
+
+	misc_deregister(&test->miscdev);
+	ida_simple_remove(&pci_endpoint_test_ida, id);
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (test->bar[bar])
+			pci_iounmap(pdev, test->bar[bar]);
+	}
+	pci_disable_msi(pdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static const struct pci_device_id pci_endpoint_test_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA74x) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_DRA72x) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);
+
+static struct pci_driver pci_endpoint_test_driver = {
+	.name		= DRV_MODULE_NAME,
+	.id_table	= pci_endpoint_test_tbl,
+	.probe		= pci_endpoint_test_probe,
+	.remove		= pci_endpoint_test_remove,
+};
+module_pci_driver(pci_endpoint_test_driver);
+
+MODULE_DESCRIPTION("PCI ENDPOINT TEST HOST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index df14142..9747c1e 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -134,3 +134,4 @@
 source "drivers/pci/hotplug/Kconfig"
 source "drivers/pci/dwc/Kconfig"
 source "drivers/pci/host/Kconfig"
+source "drivers/pci/endpoint/Kconfig"
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index dfb8a69..b7e1552 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -9,16 +9,44 @@
 	depends on PCI_MSI_IRQ_DOMAIN
         select PCIE_DW
 
+config PCIE_DW_EP
+	bool
+	depends on PCI_ENDPOINT
+	select PCIE_DW
+
 config PCI_DRA7XX
 	bool "TI DRA7xx PCIe controller"
-	depends on PCI
+	depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT
 	depends on OF && HAS_IOMEM && TI_PIPE3
+	help
+	 Enables support for the PCIe controller in the DRA7xx SoC. There
+	 are two instances of PCIe controller in DRA7xx. This controller can
+	 work either as EP or RC. In order to enable host-specific features
+	 PCI_DRA7XX_HOST must be selected and in order to enable device-
+	 specific features PCI_DRA7XX_EP must be selected. This uses
+	 the Designware core.
+
+if PCI_DRA7XX
+
+config PCI_DRA7XX_HOST
+	bool "PCI DRA7xx Host Mode"
+	depends on PCI
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIE_DW_HOST
+	default y
 	help
-	 Enables support for the PCIe controller in the DRA7xx SoC.  There
-	 are two instances of PCIe controller in DRA7xx.  This controller can
-	 act both as EP and RC.  This reuses the Designware core.
+	 Enables support for the PCIe controller in the DRA7xx SoC to work in
+	 host mode.
+
+config PCI_DRA7XX_EP
+	bool "PCI DRA7xx Endpoint Mode"
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	help
+	 Enables support for the PCIe controller in the DRA7xx SoC to work in
+	 endpoint mode.
+
+endif
 
 config PCIE_DW_PLAT
 	bool "Platform bus based DesignWare PCIe Controller"
@@ -89,6 +117,7 @@
 	depends on PCI_MSI_IRQ_DOMAIN
 	select PCIEPORTBUS
 	select PCIE_DW_HOST
+	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want PCIe controller support on HiSilicon
 	  Hip05 and Hip06 SoCs
diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile
index a2df13c..f31a859 100644
--- a/drivers/pci/dwc/Makefile
+++ b/drivers/pci/dwc/Makefile
@@ -1,7 +1,10 @@
 obj-$(CONFIG_PCIE_DW) += pcie-designware.o
 obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
+obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
 obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
-obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),)
+        obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
+endif
 obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
 obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 0984baf..8decf46 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -10,12 +10,14 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
@@ -24,6 +26,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "pcie-designware.h"
 
@@ -57,6 +61,11 @@
 #define	MSI						BIT(4)
 #define	LEG_EP_INTERRUPTS (INTA | INTB | INTC | INTD)
 
+#define	PCIECTRL_TI_CONF_DEVICE_TYPE			0x0100
+#define	DEVICE_TYPE_EP					0x0
+#define	DEVICE_TYPE_LEG_EP				0x1
+#define	DEVICE_TYPE_RC					0x4
+
 #define	PCIECTRL_DRA7XX_CONF_DEVICE_CMD			0x0104
 #define	LTSSM_EN					0x1
 
@@ -66,6 +75,13 @@
 
 #define EXP_CAP_ID_OFFSET				0x70
 
+#define	PCIECTRL_TI_CONF_INTX_ASSERT			0x0124
+#define	PCIECTRL_TI_CONF_INTX_DEASSERT			0x0128
+
+#define	PCIECTRL_TI_CONF_MSI_XMT			0x012c
+#define MSI_REQ_GRANT					BIT(0)
+#define MSI_VECTOR_SHIFT				7
+
 struct dra7xx_pcie {
 	struct dw_pcie		*pci;
 	void __iomem		*base;		/* DT ti_conf */
@@ -73,6 +89,11 @@ struct dra7xx_pcie {
 	struct phy		**phy;
 	int			link_gen;
 	struct irq_domain	*irq_domain;
+	enum dw_pcie_device_mode mode;
+};
+
+struct dra7xx_pcie_of_data {
+	enum dw_pcie_device_mode mode;
 };
 
 #define to_dra7xx_pcie(x)	dev_get_drvdata((x)->dev)
@@ -88,6 +109,11 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
 	writel(value, pcie->base + offset);
 }
 
+static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+	return pci_addr & DRA7XX_CPU_TO_BUS_ADDR;
+}
+
 static int dra7xx_pcie_link_up(struct dw_pcie *pci)
 {
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
@@ -96,9 +122,19 @@ static int dra7xx_pcie_link_up(struct dw_pcie *pci)
 	return !!(reg & LINK_UP);
 }
 
-static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx)
+static void dra7xx_pcie_stop_link(struct dw_pcie *pci)
 {
-	struct dw_pcie *pci = dra7xx->pci;
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+	u32 reg;
+
+	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
+	reg &= ~LTSSM_EN;
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
+}
+
+static int dra7xx_pcie_establish_link(struct dw_pcie *pci)
+{
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
 	struct device *dev = pci->dev;
 	u32 reg;
 	u32 exp_cap_off = EXP_CAP_ID_OFFSET;
@@ -132,19 +168,31 @@ static int dra7xx_pcie_establish_link(struct dra7xx_pcie *dra7xx)
 	reg |= LTSSM_EN;
 	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
 
-	return dw_pcie_wait_for_link(pci);
+	return 0;
+}
+
+static void dra7xx_pcie_enable_msi_interrupts(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
+			   ~LEG_EP_INTERRUPTS & ~MSI);
+
+	dra7xx_pcie_writel(dra7xx,
+			   PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
+			   MSI | LEG_EP_INTERRUPTS);
+}
+
+static void dra7xx_pcie_enable_wrapper_interrupts(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
+			   ~INTERRUPTS);
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN,
+			   INTERRUPTS);
 }
 
 static void dra7xx_pcie_enable_interrupts(struct dra7xx_pcie *dra7xx)
 {
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN,
-			   ~INTERRUPTS);
-	dra7xx_pcie_writel(dra7xx,
-			   PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MAIN, INTERRUPTS);
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MSI,
-			   ~LEG_EP_INTERRUPTS & ~MSI);
-	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_IRQENABLE_SET_MSI,
-			   MSI | LEG_EP_INTERRUPTS);
+	dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+	dra7xx_pcie_enable_msi_interrupts(dra7xx);
 }
 
 static void dra7xx_pcie_host_init(struct pcie_port *pp)
@@ -152,14 +200,10 @@ static void dra7xx_pcie_host_init(struct pcie_port *pp)
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
 
-	pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
-	pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
-
 	dw_pcie_setup_rc(pp);
 
-	dra7xx_pcie_establish_link(dra7xx);
+	dra7xx_pcie_establish_link(pci);
+	dw_pcie_wait_for_link(pci);
 	dw_pcie_msi_init(pp);
 	dra7xx_pcie_enable_interrupts(dra7xx);
 }
@@ -237,6 +281,7 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
 	struct dra7xx_pcie *dra7xx = arg;
 	struct dw_pcie *pci = dra7xx->pci;
 	struct device *dev = pci->dev;
+	struct dw_pcie_ep *ep = &pci->ep;
 	u32 reg;
 
 	reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_IRQSTATUS_MAIN);
@@ -273,8 +318,11 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
 	if (reg & LINK_REQ_RST)
 		dev_dbg(dev, "Link Request Reset\n");
 
-	if (reg & LINK_UP_EVT)
+	if (reg & LINK_UP_EVT) {
+		if (dra7xx->mode == DW_PCIE_EP_TYPE)
+			dw_pcie_ep_linkup(ep);
 		dev_dbg(dev, "Link-up state change\n");
+	}
 
 	if (reg & CFG_BME_EVT)
 		dev_dbg(dev, "CFG 'Bus Master Enable' change\n");
@@ -287,6 +335,94 @@ static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static void dra7xx_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+	dra7xx_pcie_enable_wrapper_interrupts(dra7xx);
+}
+
+static void dra7xx_pcie_raise_legacy_irq(struct dra7xx_pcie *dra7xx)
+{
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_ASSERT, 0x1);
+	mdelay(1);
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_INTX_DEASSERT, 0x1);
+}
+
+static void dra7xx_pcie_raise_msi_irq(struct dra7xx_pcie *dra7xx,
+				      u8 interrupt_num)
+{
+	u32 reg;
+
+	reg = (interrupt_num - 1) << MSI_VECTOR_SHIFT;
+	reg |= MSI_REQ_GRANT;
+	dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_MSI_XMT, reg);
+}
+
+static int dra7xx_pcie_raise_irq(struct dw_pcie_ep *ep,
+				 enum pci_epc_irq_type type, u8 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pci);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		dra7xx_pcie_raise_legacy_irq(dra7xx);
+		break;
+	case PCI_EPC_IRQ_MSI:
+		dra7xx_pcie_raise_msi_irq(dra7xx, interrupt_num);
+		break;
+	default:
+		dev_err(pci->dev, "UNKNOWN IRQ type\n");
+	}
+
+	return 0;
+}
+
+static struct dw_pcie_ep_ops pcie_ep_ops = {
+	.ep_init = dra7xx_pcie_ep_init,
+	.raise_irq = dra7xx_pcie_raise_irq,
+};
+
+static int __init dra7xx_add_pcie_ep(struct dra7xx_pcie *dra7xx,
+				     struct platform_device *pdev)
+{
+	int ret;
+	struct dw_pcie_ep *ep;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct dw_pcie *pci = dra7xx->pci;
+
+	ep = &pci->ep;
+	ep->ops = &pcie_ep_ops;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics");
+	pci->dbi_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pci->dbi_base)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ep_dbics2");
+	pci->dbi_base2 = devm_ioremap(dev, res->start, resource_size(res));
+	if (!pci->dbi_base2)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
+	if (!res)
+		return -EINVAL;
+
+	ep->phys_base = res->start;
+	ep->addr_size = resource_size(res);
+
+	ret = dw_pcie_ep_init(ep);
+	if (ret) {
+		dev_err(dev, "failed to initialize endpoint\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 				       struct platform_device *pdev)
 {
@@ -329,6 +465,9 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = dra7xx_pcie_cpu_addr_fixup,
+	.start_link = dra7xx_pcie_establish_link,
+	.stop_link = dra7xx_pcie_stop_link,
 	.link_up = dra7xx_pcie_link_up,
 };
 
@@ -371,6 +510,68 @@ static int dra7xx_pcie_enable_phy(struct dra7xx_pcie *dra7xx)
 	return ret;
 }
 
+static const struct dra7xx_pcie_of_data dra7xx_pcie_rc_of_data = {
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id of_dra7xx_pcie_match[] = {
+	{
+		.compatible = "ti,dra7-pcie",
+		.data = &dra7xx_pcie_rc_of_data,
+	},
+	{
+		.compatible = "ti,dra7-pcie-ep",
+		.data = &dra7xx_pcie_ep_of_data,
+	},
+	{},
+};
+
+/*
+ * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * @dra7xx: the dra7xx device where the workaround should be applied
+ *
+ * Access to the PCIe slave port that are not 32-bit aligned will result
+ * in incorrect mapping to TLP Address and Byte enable fields. Therefore,
+ * byte and half-word accesses are not possible to byte offset 0x1, 0x2, or
+ * 0x3.
+ *
+ * To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
+ */
+static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+{
+	int ret;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_phandle(np,
+						 "ti,syscon-unaligned-access");
+	if (IS_ERR(regmap)) {
+		dev_dbg(dev, "can't get ti,syscon-unaligned-access\n");
+		return -EINVAL;
+	}
+
+	ret = of_parse_phandle_with_fixed_args(np, "ti,syscon-unaligned-access",
+					       2, 0, &args);
+	if (ret) {
+		dev_err(dev, "failed to parse ti,syscon-unaligned-access\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(regmap, args.args[0], args.args[1],
+				 args.args[1]);
+	if (ret)
+		dev_err(dev, "failed to enable unaligned access\n");
+
+	of_node_put(args.np);
+
+	return ret;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
@@ -388,6 +589,16 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	char name[10];
 	struct gpio_desc *reset;
+	const struct of_device_id *match;
+	const struct dra7xx_pcie_of_data *data;
+	enum dw_pcie_device_mode mode;
+
+	match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct dra7xx_pcie_of_data *)match->data;
+	mode = (enum dw_pcie_device_mode)data->mode;
 
 	dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
 	if (!dra7xx)
@@ -409,13 +620,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
-			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
-	if (ret) {
-		dev_err(dev, "failed to request irq\n");
-		return ret;
-	}
-
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ti_conf");
 	base = devm_ioremap_nocache(dev, res->start, resource_size(res));
 	if (!base)
@@ -473,9 +677,37 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	if (dra7xx->link_gen < 0 || dra7xx->link_gen > 2)
 		dra7xx->link_gen = 2;
 
-	ret = dra7xx_add_pcie_port(dra7xx, pdev);
-	if (ret < 0)
+	switch (mode) {
+	case DW_PCIE_RC_TYPE:
+		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+				   DEVICE_TYPE_RC);
+		ret = dra7xx_add_pcie_port(dra7xx, pdev);
+		if (ret < 0)
+			goto err_gpio;
+		break;
+	case DW_PCIE_EP_TYPE:
+		dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
+				   DEVICE_TYPE_EP);
+
+		ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
+		if (ret)
+			goto err_gpio;
+
+		ret = dra7xx_add_pcie_ep(dra7xx, pdev);
+		if (ret < 0)
+			goto err_gpio;
+		break;
+	default:
+		dev_err(dev, "INVALID device type %d\n", mode);
+	}
+	dra7xx->mode = mode;
+
+	ret = devm_request_irq(dev, irq, dra7xx_pcie_irq_handler,
+			       IRQF_SHARED, "dra7xx-pcie-main", dra7xx);
+	if (ret) {
+		dev_err(dev, "failed to request irq\n");
 		goto err_gpio;
+	}
 
 	return 0;
 
@@ -496,6 +728,9 @@ static int dra7xx_pcie_suspend(struct device *dev)
 	struct dw_pcie *pci = dra7xx->pci;
 	u32 val;
 
+	if (dra7xx->mode != DW_PCIE_RC_TYPE)
+		return 0;
+
 	/* clear MSE */
 	val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
 	val &= ~PCI_COMMAND_MEMORY;
@@ -510,6 +745,9 @@ static int dra7xx_pcie_resume(struct device *dev)
 	struct dw_pcie *pci = dra7xx->pci;
 	u32 val;
 
+	if (dra7xx->mode != DW_PCIE_RC_TYPE)
+		return 0;
+
 	/* set MSE */
 	val = dw_pcie_readl_dbi(pci, PCI_COMMAND);
 	val |= PCI_COMMAND_MEMORY;
@@ -548,11 +786,6 @@ static const struct dev_pm_ops dra7xx_pcie_pm_ops = {
 				      dra7xx_pcie_resume_noirq)
 };
 
-static const struct of_device_id of_dra7xx_pcie_match[] = {
-	{ .compatible = "ti,dra7-pcie", },
-	{},
-};
-
 static struct platform_driver dra7xx_pcie_driver = {
 	.driver = {
 		.name	= "dra7-pcie",
diff --git a/drivers/pci/dwc/pci-exynos.c b/drivers/pci/dwc/pci-exynos.c
index 993b650..546082a 100644
--- a/drivers/pci/dwc/pci-exynos.c
+++ b/drivers/pci/dwc/pci-exynos.c
@@ -132,10 +132,6 @@ static int exynos5440_pcie_get_mem_resources(struct platform_device *pdev,
 	struct device *dev = pci->dev;
 	struct resource *res;
 
-	/* If using the PHY framework, doesn't need to get other resource */
-	if (ep->using_phy)
-		return 0;
-
 	ep->mem_res = devm_kzalloc(dev, sizeof(*ep->mem_res), GFP_KERNEL);
 	if (!ep->mem_res)
 		return -ENOMEM;
@@ -145,6 +141,10 @@ static int exynos5440_pcie_get_mem_resources(struct platform_device *pdev,
 	if (IS_ERR(ep->mem_res->elbi_base))
 		return PTR_ERR(ep->mem_res->elbi_base);
 
+	/* If using the PHY framework, doesn't need to get other resource */
+	if (ep->using_phy)
+		return 0;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	ep->mem_res->phy_base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(ep->mem_res->phy_base))
@@ -521,23 +521,25 @@ static void exynos_pcie_enable_interrupts(struct exynos_pcie *ep)
 		exynos_pcie_msi_init(ep);
 }
 
-static u32 exynos_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+static u32 exynos_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
+				u32 reg, size_t size)
 {
 	struct exynos_pcie *ep = to_exynos_pcie(pci);
 	u32 val;
 
 	exynos_pcie_sideband_dbi_r_mode(ep, true);
-	val = readl(pci->dbi_base + reg);
+	dw_pcie_read(base + reg, size, &val);
 	exynos_pcie_sideband_dbi_r_mode(ep, false);
 	return val;
 }
 
-static void exynos_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+static void exynos_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
+				  u32 reg, size_t size, u32 val)
 {
 	struct exynos_pcie *ep = to_exynos_pcie(pci);
 
 	exynos_pcie_sideband_dbi_w_mode(ep, true);
-	writel(val, pci->dbi_base + reg);
+	dw_pcie_write(base + reg, size, val);
 	exynos_pcie_sideband_dbi_w_mode(ep, false);
 }
 
@@ -644,8 +646,8 @@ static int __init exynos_add_pcie_port(struct exynos_pcie *ep,
 }
 
 static const struct dw_pcie_ops dw_pcie_ops = {
-	.readl_dbi = exynos_pcie_readl_dbi,
-	.writel_dbi = exynos_pcie_writel_dbi,
+	.read_dbi = exynos_pcie_read_dbi,
+	.write_dbi = exynos_pcie_write_dbi,
 	.link_up = exynos_pcie_link_up,
 };
 
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index fcd3ef8..5b3b3af 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -78,6 +78,11 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u
 	regmap_write(artpec6_pcie->regmap, offset, val);
 }
 
+static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
+{
+	return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
+}
+
 static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
 {
 	struct dw_pcie *pci = artpec6_pcie->pci;
@@ -142,11 +147,6 @@ static int artpec6_pcie_establish_link(struct artpec6_pcie *artpec6_pcie)
 	 */
 	dw_pcie_writel_dbi(pci, MISC_CONTROL_1_OFF, DBI_RO_WR_EN);
 
-	pp->io_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->mem_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->cfg0_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-	pp->cfg1_base &= ARTPEC6_CPU_TO_BUS_ADDR;
-
 	/* setup root complex */
 	dw_pcie_setup_rc(pp);
 
@@ -234,6 +234,10 @@ static int artpec6_add_pcie_port(struct artpec6_pcie *artpec6_pcie,
 	return 0;
 }
 
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = artpec6_pcie_cpu_addr_fixup,
+};
+
 static int artpec6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -252,6 +256,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
 
 	artpec6_pcie->pci = pci;
 
diff --git a/drivers/pci/dwc/pcie-designware-ep.c b/drivers/pci/dwc/pcie-designware-ep.c
new file mode 100644
index 0000000..3984063
--- /dev/null
+++ b/drivers/pci/dwc/pcie-designware-ep.c
@@ -0,0 +1,342 @@
+/**
+ * Synopsys Designware PCIe Endpoint controller driver
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/of.h>
+
+#include "pcie-designware.h"
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	pci_epc_linkup(epc);
+}
+
+static void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
+{
+	u32 reg;
+
+	reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+	dw_pcie_writel_dbi2(pci, reg, 0x0);
+	dw_pcie_writel_dbi(pci, reg, 0x0);
+}
+
+static int dw_pcie_ep_write_header(struct pci_epc *epc,
+				   struct pci_epf_header *hdr)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, hdr->vendorid);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, hdr->deviceid);
+	dw_pcie_writeb_dbi(pci, PCI_REVISION_ID, hdr->revid);
+	dw_pcie_writeb_dbi(pci, PCI_CLASS_PROG, hdr->progif_code);
+	dw_pcie_writew_dbi(pci, PCI_CLASS_DEVICE,
+			   hdr->subclass_code | hdr->baseclass_code << 8);
+	dw_pcie_writeb_dbi(pci, PCI_CACHE_LINE_SIZE,
+			   hdr->cache_line_size);
+	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_VENDOR_ID,
+			   hdr->subsys_vendor_id);
+	dw_pcie_writew_dbi(pci, PCI_SUBSYSTEM_ID, hdr->subsys_id);
+	dw_pcie_writeb_dbi(pci, PCI_INTERRUPT_PIN,
+			   hdr->interrupt_pin);
+
+	return 0;
+}
+
+static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, enum pci_barno bar,
+				  dma_addr_t cpu_addr,
+				  enum dw_pcie_as_type as_type)
+{
+	int ret;
+	u32 free_win;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	free_win = find_first_zero_bit(&ep->ib_window_map,
+				       sizeof(ep->ib_window_map));
+	if (free_win >= ep->num_ib_windows) {
+		dev_err(pci->dev, "no free inbound window\n");
+		return -EINVAL;
+	}
+
+	ret = dw_pcie_prog_inbound_atu(pci, free_win, bar, cpu_addr,
+				       as_type);
+	if (ret < 0) {
+		dev_err(pci->dev, "Failed to program IB window\n");
+		return ret;
+	}
+
+	ep->bar_to_atu[bar] = free_win;
+	set_bit(free_win, &ep->ib_window_map);
+
+	return 0;
+}
+
+static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, phys_addr_t phys_addr,
+				   u64 pci_addr, size_t size)
+{
+	u32 free_win;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	free_win = find_first_zero_bit(&ep->ob_window_map,
+				       sizeof(ep->ob_window_map));
+	if (free_win >= ep->num_ob_windows) {
+		dev_err(pci->dev, "no free outbound window\n");
+		return -EINVAL;
+	}
+
+	dw_pcie_prog_outbound_atu(pci, free_win, PCIE_ATU_TYPE_MEM,
+				  phys_addr, pci_addr, size);
+
+	set_bit(free_win, &ep->ob_window_map);
+	ep->outbound_addr[free_win] = phys_addr;
+
+	return 0;
+}
+
+static void dw_pcie_ep_clear_bar(struct pci_epc *epc, enum pci_barno bar)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	u32 atu_index = ep->bar_to_atu[bar];
+
+	dw_pcie_ep_reset_bar(pci, bar);
+
+	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_INBOUND);
+	clear_bit(atu_index, &ep->ib_window_map);
+}
+
+static int dw_pcie_ep_set_bar(struct pci_epc *epc, enum pci_barno bar,
+			      dma_addr_t bar_phys, size_t size, int flags)
+{
+	int ret;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	enum dw_pcie_as_type as_type;
+	u32 reg = PCI_BASE_ADDRESS_0 + (4 * bar);
+
+	if (!(flags & PCI_BASE_ADDRESS_SPACE))
+		as_type = DW_PCIE_AS_MEM;
+	else
+		as_type = DW_PCIE_AS_IO;
+
+	ret = dw_pcie_ep_inbound_atu(ep, bar, bar_phys, as_type);
+	if (ret)
+		return ret;
+
+	dw_pcie_writel_dbi2(pci, reg, size - 1);
+	dw_pcie_writel_dbi(pci, reg, flags);
+
+	return 0;
+}
+
+static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
+			      u32 *atu_index)
+{
+	u32 index;
+
+	for (index = 0; index < ep->num_ob_windows; index++) {
+		if (ep->outbound_addr[index] != addr)
+			continue;
+		*atu_index = index;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, phys_addr_t addr)
+{
+	int ret;
+	u32 atu_index;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	ret = dw_pcie_find_index(ep, addr, &atu_index);
+	if (ret < 0)
+		return;
+
+	dw_pcie_disable_atu(pci, atu_index, DW_PCIE_REGION_OUTBOUND);
+	clear_bit(atu_index, &ep->ob_window_map);
+}
+
+static int dw_pcie_ep_map_addr(struct pci_epc *epc, phys_addr_t addr,
+			       u64 pci_addr, size_t size)
+{
+	int ret;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	ret = dw_pcie_ep_outbound_atu(ep, addr, pci_addr, size);
+	if (ret) {
+		dev_err(pci->dev, "failed to enable address\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_pcie_ep_get_msi(struct pci_epc *epc)
+{
+	int val;
+	u32 lower_addr;
+	u32 upper_addr;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	val = dw_pcie_readb_dbi(pci, MSI_MESSAGE_CONTROL);
+	val = (val & MSI_CAP_MME_MASK) >> MSI_CAP_MME_SHIFT;
+
+	lower_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_L32);
+	upper_addr = dw_pcie_readl_dbi(pci, MSI_MESSAGE_ADDR_U32);
+
+	if (!(lower_addr || upper_addr))
+		return -EINVAL;
+
+	return val;
+}
+
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 encode_int)
+{
+	int val;
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	val = (encode_int << MSI_CAP_MMC_SHIFT);
+	dw_pcie_writew_dbi(pci, MSI_MESSAGE_CONTROL, val);
+
+	return 0;
+}
+
+static int dw_pcie_ep_raise_irq(struct pci_epc *epc,
+				enum pci_epc_irq_type type, u8 interrupt_num)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+
+	if (!ep->ops->raise_irq)
+		return -EINVAL;
+
+	return ep->ops->raise_irq(ep, type, interrupt_num);
+}
+
+static void dw_pcie_ep_stop(struct pci_epc *epc)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	if (!pci->ops->stop_link)
+		return;
+
+	pci->ops->stop_link(pci);
+}
+
+static int dw_pcie_ep_start(struct pci_epc *epc)
+{
+	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	if (!pci->ops->start_link)
+		return -EINVAL;
+
+	return pci->ops->start_link(pci);
+}
+
+static const struct pci_epc_ops epc_ops = {
+	.write_header		= dw_pcie_ep_write_header,
+	.set_bar		= dw_pcie_ep_set_bar,
+	.clear_bar		= dw_pcie_ep_clear_bar,
+	.map_addr		= dw_pcie_ep_map_addr,
+	.unmap_addr		= dw_pcie_ep_unmap_addr,
+	.set_msi		= dw_pcie_ep_set_msi,
+	.get_msi		= dw_pcie_ep_get_msi,
+	.raise_irq		= dw_pcie_ep_raise_irq,
+	.start			= dw_pcie_ep_start,
+	.stop			= dw_pcie_ep_stop,
+};
+
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	pci_epc_mem_exit(epc);
+}
+
+int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	int ret;
+	void *addr;
+	enum pci_barno bar;
+	struct pci_epc *epc;
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	if (!pci->dbi_base || !pci->dbi_base2) {
+		dev_err(dev, "dbi_base/deb_base2 is not populated\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "num-ib-windows", &ep->num_ib_windows);
+	if (ret < 0) {
+		dev_err(dev, "unable to read *num-ib-windows* property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "num-ob-windows", &ep->num_ob_windows);
+	if (ret < 0) {
+		dev_err(dev, "unable to read *num-ob-windows* property\n");
+		return ret;
+	}
+
+	addr = devm_kzalloc(dev, sizeof(phys_addr_t) * ep->num_ob_windows,
+			    GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+	ep->outbound_addr = addr;
+
+	for (bar = BAR_0; bar <= BAR_5; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+
+	if (ep->ops->ep_init)
+		ep->ops->ep_init(ep);
+
+	epc = devm_pci_epc_create(dev, &epc_ops);
+	if (IS_ERR(epc)) {
+		dev_err(dev, "failed to create epc device\n");
+		return PTR_ERR(epc);
+	}
+
+	ret = of_property_read_u8(np, "max-functions", &epc->max_functions);
+	if (ret < 0)
+		epc->max_functions = 1;
+
+	ret = pci_epc_mem_init(epc, ep->phys_base, ep->addr_size);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize address space\n");
+		return ret;
+	}
+
+	ep->epc = epc;
+	epc_set_drvdata(epc, ep);
+	dw_pcie_setup(pci);
+
+	return 0;
+}
diff --git a/drivers/pci/dwc/pcie-designware-host.c b/drivers/pci/dwc/pcie-designware-host.c
index 5ba3349..aece296 100644
--- a/drivers/pci/dwc/pcie-designware-host.c
+++ b/drivers/pci/dwc/pcie-designware-host.c
@@ -56,24 +56,25 @@ static struct irq_chip dw_msi_irq_chip = {
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
-	unsigned long val;
+	u32 val;
 	int i, pos, irq;
 	irqreturn_t ret = IRQ_NONE;
 
 	for (i = 0; i < MAX_MSI_CTRLS; i++) {
 		dw_pcie_rd_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4,
-				    (u32 *)&val);
-		if (val) {
-			ret = IRQ_HANDLED;
-			pos = 0;
-			while ((pos = find_next_bit(&val, 32, pos)) != 32) {
-				irq = irq_find_mapping(pp->irq_domain,
-						       i * 32 + pos);
-				dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS +
-						    i * 12, 4, 1 << pos);
-				generic_handle_irq(irq);
-				pos++;
-			}
+				    &val);
+		if (!val)
+			continue;
+
+		ret = IRQ_HANDLED;
+		pos = 0;
+		while ((pos = find_next_bit((unsigned long *) &val, 32,
+					    pos)) != 32) {
+			irq = irq_find_mapping(pp->irq_domain, i * 32 + pos);
+			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12,
+					    4, 1 << pos);
+			generic_handle_irq(irq);
+			pos++;
 		}
 	}
 
diff --git a/drivers/pci/dwc/pcie-designware-plat.c b/drivers/pci/dwc/pcie-designware-plat.c
index b6c832b..f20d494 100644
--- a/drivers/pci/dwc/pcie-designware-plat.c
+++ b/drivers/pci/dwc/pcie-designware-plat.c
@@ -86,6 +86,9 @@ static int dw_plat_add_pcie_port(struct pcie_port *pp,
 	return 0;
 }
 
+static const struct dw_pcie_ops dw_pcie_ops = {
+};
+
 static int dw_plat_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -103,6 +106,7 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
 
 	dw_plat_pcie->pci = pci;
 
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index 7e1fb7d..0e03af2 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -61,91 +61,253 @@ int dw_pcie_write(void __iomem *addr, int size, u32 val)
 	return PCIBIOS_SUCCESSFUL;
 }
 
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+		       size_t size)
 {
-	if (pci->ops->readl_dbi)
-		return pci->ops->readl_dbi(pci, reg);
+	int ret;
+	u32 val;
 
-	return readl(pci->dbi_base + reg);
+	if (pci->ops->read_dbi)
+		return pci->ops->read_dbi(pci, base, reg, size);
+
+	ret = dw_pcie_read(base + reg, size, &val);
+	if (ret)
+		dev_err(pci->dev, "read DBI address failed\n");
+
+	return val;
 }
 
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+			 size_t size, u32 val)
 {
-	if (pci->ops->writel_dbi)
-		pci->ops->writel_dbi(pci, reg, val);
-	else
-		writel(val, pci->dbi_base + reg);
+	int ret;
+
+	if (pci->ops->write_dbi) {
+		pci->ops->write_dbi(pci, base, reg, size, val);
+		return;
+	}
+
+	ret = dw_pcie_write(base + reg, size, val);
+	if (ret)
+		dev_err(pci->dev, "write DBI address failed\n");
 }
 
-static u32 dw_pcie_readl_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
 	return dw_pcie_readl_dbi(pci, offset + reg);
 }
 
-static void dw_pcie_writel_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				  u32 val)
+static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+				     u32 val)
 {
 	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
 
 	dw_pcie_writel_dbi(pci, offset + reg, val);
 }
 
+void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index, int type,
+				      u64 cpu_addr, u64 pci_addr, u32 size)
+{
+	u32 retries, val;
+
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
+				 lower_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
+				 upper_32_bits(cpu_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
+				 lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+				 lower_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+				 upper_32_bits(pci_addr));
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
+				 type);
+	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_ENABLE);
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_ob_unroll(pci, index,
+					      PCIE_ATU_UNR_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
 			       u64 cpu_addr, u64 pci_addr, u32 size)
 {
 	u32 retries, val;
 
+	if (pci->ops->cpu_addr_fixup)
+		cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
+
 	if (pci->iatu_unroll_enabled) {
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
-				      lower_32_bits(cpu_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
-				      upper_32_bits(cpu_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
-				      lower_32_bits(cpu_addr + size - 1));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				      lower_32_bits(pci_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				      upper_32_bits(pci_addr));
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
-				      type);
-		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				      PCIE_ATU_ENABLE);
-	} else {
-		dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
-				   PCIE_ATU_REGION_OUTBOUND | index);
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
-				   lower_32_bits(cpu_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
-				   upper_32_bits(cpu_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
-				   lower_32_bits(cpu_addr + size - 1));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
-				   lower_32_bits(pci_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
-				   upper_32_bits(pci_addr));
-		dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-		dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+		dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
+						 pci_addr, size);
+		return;
 	}
 
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
+			   PCIE_ATU_REGION_OUTBOUND | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
+			   lower_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
+			   upper_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
+			   lower_32_bits(cpu_addr + size - 1));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
+			   lower_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
+			   upper_32_bits(pci_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+
 	/*
 	 * Make sure ATU enable takes effect before any subsequent config
 	 * and I/O accesses.
 	 */
 	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		if (pci->iatu_unroll_enabled)
-			val = dw_pcie_readl_unroll(pci, index,
-						   PCIE_ATU_UNR_REGION_CTRL2);
-		else
-			val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
 		if (val == PCIE_ATU_ENABLE)
 			return;
 
 		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
 	}
-	dev_err(pci->dev, "iATU is not being enabled\n");
+	dev_err(pci->dev, "outbound iATU is not being enabled\n");
+}
+
+static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+{
+	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+	return dw_pcie_readl_dbi(pci, offset + reg);
+}
+
+static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+				     u32 val)
+{
+	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
+
+	dw_pcie_writel_dbi(pci, offset + reg, val);
+}
+
+int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index, int bar,
+				    u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+	int type;
+	u32 retries, val;
+
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+				 lower_32_bits(cpu_addr));
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+				 upper_32_bits(cpu_addr));
+
+	switch (as_type) {
+	case DW_PCIE_AS_MEM:
+		type = PCIE_ATU_TYPE_MEM;
+		break;
+	case DW_PCIE_AS_IO:
+		type = PCIE_ATU_TYPE_IO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
+	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+				 PCIE_ATU_ENABLE |
+				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_ib_unroll(pci, index,
+					      PCIE_ATU_UNR_REGION_CTRL2);
+		if (val & PCIE_ATU_ENABLE)
+			return 0;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+	return -EBUSY;
+}
+
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+			     u64 cpu_addr, enum dw_pcie_as_type as_type)
+{
+	int type;
+	u32 retries, val;
+
+	if (pci->iatu_unroll_enabled)
+		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
+						       cpu_addr, as_type);
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
+			   index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
+	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
+
+	switch (as_type) {
+	case DW_PCIE_AS_MEM:
+		type = PCIE_ATU_TYPE_MEM;
+		break;
+	case DW_PCIE_AS_IO:
+		type = PCIE_ATU_TYPE_IO;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
+			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
+
+	/*
+	 * Make sure ATU enable takes effect before any subsequent config
+	 * and I/O accesses.
+	 */
+	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
+		if (val & PCIE_ATU_ENABLE)
+			return 0;
+
+		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+	}
+	dev_err(pci->dev, "inbound iATU is not being enabled\n");
+
+	return -EBUSY;
+}
+
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type)
+{
+	int region;
+
+	switch (type) {
+	case DW_PCIE_REGION_INBOUND:
+		region = PCIE_ATU_REGION_INBOUND;
+		break;
+	case DW_PCIE_REGION_OUTBOUND:
+		region = PCIE_ATU_REGION_OUTBOUND;
+		break;
+	default:
+		return;
+	}
+
+	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
 }
 
 int dw_pcie_wait_for_link(struct dw_pcie *pci)
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index cd3b871..c6a8405 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -18,6 +18,9 @@
 #include <linux/msi.h>
 #include <linux/pci.h>
 
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+
 /* Parameters for the waiting for link up routine */
 #define LINK_WAIT_MAX_RETRIES		10
 #define LINK_WAIT_USLEEP_MIN		90000
@@ -89,6 +92,16 @@
 #define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region)	\
 			((0x3 << 20) | ((region) << 9))
 
+#define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region)				\
+			((0x3 << 20) | ((region) << 9) | (0x1 << 8))
+
+#define MSI_MESSAGE_CONTROL		0x52
+#define MSI_CAP_MMC_SHIFT		1
+#define MSI_CAP_MME_SHIFT		4
+#define MSI_CAP_MME_MASK		(7 << MSI_CAP_MME_SHIFT)
+#define MSI_MESSAGE_ADDR_L32		0x54
+#define MSI_MESSAGE_ADDR_U32		0x58
+
 /*
  * Maximum number of MSI IRQs can be 256 per controller. But keep
  * it 32 as of now. Probably we will never need more than 32. If needed,
@@ -99,6 +112,20 @@
 
 struct pcie_port;
 struct dw_pcie;
+struct dw_pcie_ep;
+
+enum dw_pcie_region_type {
+	DW_PCIE_REGION_UNKNOWN,
+	DW_PCIE_REGION_INBOUND,
+	DW_PCIE_REGION_OUTBOUND,
+};
+
+enum dw_pcie_device_mode {
+	DW_PCIE_UNKNOWN_TYPE,
+	DW_PCIE_EP_TYPE,
+	DW_PCIE_LEG_EP_TYPE,
+	DW_PCIE_RC_TYPE,
+};
 
 struct dw_pcie_host_ops {
 	int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
@@ -142,35 +169,116 @@ struct pcie_port {
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };
 
+enum dw_pcie_as_type {
+	DW_PCIE_AS_UNKNOWN,
+	DW_PCIE_AS_MEM,
+	DW_PCIE_AS_IO,
+};
+
+struct dw_pcie_ep_ops {
+	void	(*ep_init)(struct dw_pcie_ep *ep);
+	int	(*raise_irq)(struct dw_pcie_ep *ep, enum pci_epc_irq_type type,
+			     u8 interrupt_num);
+};
+
+struct dw_pcie_ep {
+	struct pci_epc		*epc;
+	struct dw_pcie_ep_ops	*ops;
+	phys_addr_t		phys_base;
+	size_t			addr_size;
+	u8			bar_to_atu[6];
+	phys_addr_t		*outbound_addr;
+	unsigned long		ib_window_map;
+	unsigned long		ob_window_map;
+	u32			num_ib_windows;
+	u32			num_ob_windows;
+};
+
 struct dw_pcie_ops {
-	u32	(*readl_dbi)(struct dw_pcie *pcie, u32 reg);
-	void	(*writel_dbi)(struct dw_pcie *pcie, u32 reg, u32 val);
+	u64	(*cpu_addr_fixup)(u64 cpu_addr);
+	u32	(*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			    size_t size);
+	void	(*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
+			     size_t size, u32 val);
 	int	(*link_up)(struct dw_pcie *pcie);
+	int	(*start_link)(struct dw_pcie *pcie);
+	void	(*stop_link)(struct dw_pcie *pcie);
 };
 
 struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
+	void __iomem		*dbi_base2;
 	u32			num_viewport;
 	u8			iatu_unroll_enabled;
 	struct pcie_port	pp;
+	struct dw_pcie_ep	ep;
 	const struct dw_pcie_ops *ops;
 };
 
 #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
 
+#define to_dw_pcie_from_ep(endpoint)   \
+		container_of((endpoint), struct dw_pcie, ep)
+
 int dw_pcie_read(void __iomem *addr, int size, u32 *val);
 int dw_pcie_write(void __iomem *addr, int size, u32 val);
 
-u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg);
-void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val);
+u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+		       size_t size);
+void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
+			 size_t size, u32 val);
 int dw_pcie_link_up(struct dw_pcie *pci);
 int dw_pcie_wait_for_link(struct dw_pcie *pci);
 void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
 			       int type, u64 cpu_addr, u64 pci_addr,
 			       u32 size);
+int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
+			     u64 cpu_addr, enum dw_pcie_as_type as_type);
+void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
+			 enum dw_pcie_region_type type);
 void dw_pcie_setup(struct dw_pcie *pci);
 
+static inline void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x4);
+}
+
+static inline void dw_pcie_writew_dbi(struct dw_pcie *pci, u32 reg, u16 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x2, val);
+}
+
+static inline u16 dw_pcie_readw_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x2);
+}
+
+static inline void dw_pcie_writeb_dbi(struct dw_pcie *pci, u32 reg, u8 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base, reg, 0x1, val);
+}
+
+static inline u8 dw_pcie_readb_dbi(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base, reg, 0x1);
+}
+
+static inline void dw_pcie_writel_dbi2(struct dw_pcie *pci, u32 reg, u32 val)
+{
+	__dw_pcie_write_dbi(pci, pci->dbi_base2, reg, 0x4, val);
+}
+
+static inline u32 dw_pcie_readl_dbi2(struct dw_pcie *pci, u32 reg)
+{
+	return __dw_pcie_read_dbi(pci, pci->dbi_base2, reg, 0x4);
+}
+
 #ifdef CONFIG_PCIE_DW_HOST
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
 void dw_pcie_msi_init(struct pcie_port *pp);
@@ -195,4 +303,23 @@ static inline int dw_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 #endif
+
+#ifdef CONFIG_PCIE_DW_EP
+void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
+int dw_pcie_ep_init(struct dw_pcie_ep *ep);
+void dw_pcie_ep_exit(struct dw_pcie_ep *ep);
+#else
+static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
+{
+}
+
+static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	return 0;
+}
+
+static inline void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
+{
+}
+#endif
 #endif /* _PCIE_DESIGNWARE_H */
diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig
new file mode 100644
index 0000000..c23f146
--- /dev/null
+++ b/drivers/pci/endpoint/Kconfig
@@ -0,0 +1,31 @@
+#
+# PCI Endpoint Support
+#
+
+menu "PCI Endpoint"
+
+config PCI_ENDPOINT
+	bool "PCI Endpoint Support"
+	help
+	   Enable this configuration option to support configurable PCI
+	   endpoint. This should be enabled if the platform has a PCI
+	   controller that can operate in endpoint mode.
+
+	   Enabling this option will build the endpoint library, which
+	   includes endpoint controller library and endpoint function
+	   library.
+
+	   If in doubt, say "N" to disable Endpoint support.
+
+config PCI_ENDPOINT_CONFIGFS
+	bool "PCI Endpoint Configfs Support"
+	depends on PCI_ENDPOINT
+	select CONFIGFS_FS
+	help
+	   This will enable the configfs entry that can be used to
+	   configure the endpoint function and used to bind the
+	   function with a endpoint controller.
+
+source "drivers/pci/endpoint/functions/Kconfig"
+
+endmenu
diff --git a/drivers/pci/endpoint/Makefile b/drivers/pci/endpoint/Makefile
new file mode 100644
index 0000000..1041f80
--- /dev/null
+++ b/drivers/pci/endpoint/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for PCI Endpoint Support
+#
+
+obj-$(CONFIG_PCI_ENDPOINT_CONFIGFS)	+= pci-ep-cfs.o
+obj-$(CONFIG_PCI_ENDPOINT)		+= pci-epc-core.o pci-epf-core.o\
+					   pci-epc-mem.o functions/
diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
new file mode 100644
index 0000000..175edad
--- /dev/null
+++ b/drivers/pci/endpoint/functions/Kconfig
@@ -0,0 +1,12 @@
+#
+# PCI Endpoint Functions
+#
+
+config PCI_EPF_TEST
+	tristate "PCI Endpoint Test driver"
+	depends on PCI_ENDPOINT
+	help
+	   Enable this configuration option to enable the test driver
+	   for PCI Endpoint.
+
+	   If in doubt, say "N" to disable Endpoint test driver.
diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
new file mode 100644
index 0000000..6d94a48
--- /dev/null
+++ b/drivers/pci/endpoint/functions/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for PCI Endpoint Functions
+#
+
+obj-$(CONFIG_PCI_EPF_TEST)		+= pci-epf-test.o
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
new file mode 100644
index 0000000..53fff80
--- /dev/null
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -0,0 +1,510 @@
+/**
+ * Test driver to test endpoint functionality
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+#include <linux/random.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci_regs.h>
+
+#define COMMAND_RAISE_LEGACY_IRQ	BIT(0)
+#define COMMAND_RAISE_MSI_IRQ		BIT(1)
+#define MSI_NUMBER_SHIFT		2
+#define MSI_NUMBER_MASK			(0x3f << MSI_NUMBER_SHIFT)
+#define COMMAND_READ			BIT(8)
+#define COMMAND_WRITE			BIT(9)
+#define COMMAND_COPY			BIT(10)
+
+#define STATUS_READ_SUCCESS		BIT(0)
+#define STATUS_READ_FAIL		BIT(1)
+#define STATUS_WRITE_SUCCESS		BIT(2)
+#define STATUS_WRITE_FAIL		BIT(3)
+#define STATUS_COPY_SUCCESS		BIT(4)
+#define STATUS_COPY_FAIL		BIT(5)
+#define STATUS_IRQ_RAISED		BIT(6)
+#define STATUS_SRC_ADDR_INVALID		BIT(7)
+#define STATUS_DST_ADDR_INVALID		BIT(8)
+
+#define TIMER_RESOLUTION		1
+
+static struct workqueue_struct *kpcitest_workqueue;
+
+struct pci_epf_test {
+	void			*reg[6];
+	struct pci_epf		*epf;
+	struct delayed_work	cmd_handler;
+};
+
+struct pci_epf_test_reg {
+	u32	magic;
+	u32	command;
+	u32	status;
+	u64	src_addr;
+	u64	dst_addr;
+	u32	size;
+	u32	checksum;
+} __packed;
+
+static struct pci_epf_header test_header = {
+	.vendorid	= PCI_ANY_ID,
+	.deviceid	= PCI_ANY_ID,
+	.baseclass_code = PCI_CLASS_OTHERS,
+	.interrupt_pin	= PCI_INTERRUPT_INTA,
+};
+
+static int bar_size[] = { 512, 1024, 16384, 131072, 1048576 };
+
+static int pci_epf_test_copy(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *src_addr;
+	void __iomem *dst_addr;
+	phys_addr_t src_phys_addr;
+	phys_addr_t dst_phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	src_addr = pci_epc_mem_alloc_addr(epc, &src_phys_addr, reg->size);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate source address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, src_phys_addr, reg->src_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map source address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		goto err_src_addr;
+	}
+
+	dst_addr = pci_epc_mem_alloc_addr(epc, &dst_phys_addr, reg->size);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate destination address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err_src_map_addr;
+	}
+
+	ret = pci_epc_map_addr(epc, dst_phys_addr, reg->dst_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map destination address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		goto err_dst_addr;
+	}
+
+	memcpy(dst_addr, src_addr, reg->size);
+
+	pci_epc_unmap_addr(epc, dst_phys_addr);
+
+err_dst_addr:
+	pci_epc_mem_free_addr(epc, dst_phys_addr, dst_addr, reg->size);
+
+err_src_map_addr:
+	pci_epc_unmap_addr(epc, src_phys_addr);
+
+err_src_addr:
+	pci_epc_mem_free_addr(epc, src_phys_addr, src_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static int pci_epf_test_read(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *src_addr;
+	void *buf;
+	u32 crc32;
+	phys_addr_t phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	src_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+	if (!src_addr) {
+		dev_err(dev, "failed to allocate address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, phys_addr, reg->src_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map address\n");
+		reg->status = STATUS_SRC_ADDR_INVALID;
+		goto err_addr;
+	}
+
+	buf = kzalloc(reg->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_map_addr;
+	}
+
+	memcpy(buf, src_addr, reg->size);
+
+	crc32 = crc32_le(~0, buf, reg->size);
+	if (crc32 != reg->checksum)
+		ret = -EIO;
+
+	kfree(buf);
+
+err_map_addr:
+	pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+	pci_epc_mem_free_addr(epc, phys_addr, src_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static int pci_epf_test_write(struct pci_epf_test *epf_test)
+{
+	int ret;
+	void __iomem *dst_addr;
+	void *buf;
+	phys_addr_t phys_addr;
+	struct pci_epf *epf = epf_test->epf;
+	struct device *dev = &epf->dev;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	dst_addr = pci_epc_mem_alloc_addr(epc, &phys_addr, reg->size);
+	if (!dst_addr) {
+		dev_err(dev, "failed to allocate address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = pci_epc_map_addr(epc, phys_addr, reg->dst_addr, reg->size);
+	if (ret) {
+		dev_err(dev, "failed to map address\n");
+		reg->status = STATUS_DST_ADDR_INVALID;
+		goto err_addr;
+	}
+
+	buf = kzalloc(reg->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err_map_addr;
+	}
+
+	get_random_bytes(buf, reg->size);
+	reg->checksum = crc32_le(~0, buf, reg->size);
+
+	memcpy(dst_addr, buf, reg->size);
+
+	/*
+	 * wait 1ms inorder for the write to complete. Without this delay L3
+	 * error in observed in the host system.
+	 */
+	mdelay(1);
+
+	kfree(buf);
+
+err_map_addr:
+	pci_epc_unmap_addr(epc, phys_addr);
+
+err_addr:
+	pci_epc_mem_free_addr(epc, phys_addr, dst_addr, reg->size);
+
+err:
+	return ret;
+}
+
+static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test)
+{
+	u8 irq;
+	u8 msi_count;
+	struct pci_epf *epf = epf_test->epf;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	reg->status |= STATUS_IRQ_RAISED;
+	msi_count = pci_epc_get_msi(epc);
+	irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+	if (irq > msi_count || msi_count <= 0)
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+	else
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+}
+
+static void pci_epf_test_cmd_handler(struct work_struct *work)
+{
+	int ret;
+	u8 irq;
+	u8 msi_count;
+	struct pci_epf_test *epf_test = container_of(work, struct pci_epf_test,
+						     cmd_handler.work);
+	struct pci_epf *epf = epf_test->epf;
+	struct pci_epc *epc = epf->epc;
+	struct pci_epf_test_reg *reg = epf_test->reg[0];
+
+	if (!reg->command)
+		goto reset_handler;
+
+	if (reg->command & COMMAND_RAISE_LEGACY_IRQ) {
+		reg->status = STATUS_IRQ_RAISED;
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_LEGACY, 0);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_WRITE) {
+		ret = pci_epf_test_write(epf_test);
+		if (ret)
+			reg->status |= STATUS_WRITE_FAIL;
+		else
+			reg->status |= STATUS_WRITE_SUCCESS;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_READ) {
+		ret = pci_epf_test_read(epf_test);
+		if (!ret)
+			reg->status |= STATUS_READ_SUCCESS;
+		else
+			reg->status |= STATUS_READ_FAIL;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_COPY) {
+		ret = pci_epf_test_copy(epf_test);
+		if (!ret)
+			reg->status |= STATUS_COPY_SUCCESS;
+		else
+			reg->status |= STATUS_COPY_FAIL;
+		pci_epf_test_raise_irq(epf_test);
+		goto reset_handler;
+	}
+
+	if (reg->command & COMMAND_RAISE_MSI_IRQ) {
+		msi_count = pci_epc_get_msi(epc);
+		irq = (reg->command & MSI_NUMBER_MASK) >> MSI_NUMBER_SHIFT;
+		if (irq > msi_count || msi_count <= 0)
+			goto reset_handler;
+		reg->status = STATUS_IRQ_RAISED;
+		pci_epc_raise_irq(epc, PCI_EPC_IRQ_MSI, irq);
+		goto reset_handler;
+	}
+
+reset_handler:
+	reg->command = 0;
+
+	queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+			   msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_linkup(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	queue_delayed_work(kpcitest_workqueue, &epf_test->cmd_handler,
+			   msecs_to_jiffies(1));
+}
+
+static void pci_epf_test_unbind(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	struct pci_epc *epc = epf->epc;
+	int bar;
+
+	cancel_delayed_work(&epf_test->cmd_handler);
+	pci_epc_stop(epc);
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		if (epf_test->reg[bar]) {
+			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			pci_epc_clear_bar(epc, bar);
+		}
+	}
+}
+
+static int pci_epf_test_set_bar(struct pci_epf *epf)
+{
+	int flags;
+	int bar;
+	int ret;
+	struct pci_epf_bar *epf_bar;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	flags = PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_32;
+	if (sizeof(dma_addr_t) == 0x8)
+		flags |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
+	for (bar = BAR_0; bar <= BAR_5; bar++) {
+		epf_bar = &epf->bar[bar];
+		ret = pci_epc_set_bar(epc, bar, epf_bar->phys_addr,
+				      epf_bar->size, flags);
+		if (ret) {
+			pci_epf_free_space(epf, epf_test->reg[bar], bar);
+			dev_err(dev, "failed to set BAR%d\n", bar);
+			if (bar == BAR_0)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int pci_epf_test_alloc_space(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+	struct device *dev = &epf->dev;
+	void *base;
+	int bar;
+
+	base = pci_epf_alloc_space(epf, sizeof(struct pci_epf_test_reg),
+				   BAR_0);
+	if (!base) {
+		dev_err(dev, "failed to allocated register space\n");
+		return -ENOMEM;
+	}
+	epf_test->reg[0] = base;
+
+	for (bar = BAR_1; bar <= BAR_5; bar++) {
+		base = pci_epf_alloc_space(epf, bar_size[bar - 1], bar);
+		if (!base)
+			dev_err(dev, "failed to allocate space for BAR%d\n",
+				bar);
+		epf_test->reg[bar] = base;
+	}
+
+	return 0;
+}
+
+static int pci_epf_test_bind(struct pci_epf *epf)
+{
+	int ret;
+	struct pci_epf_header *header = epf->header;
+	struct pci_epc *epc = epf->epc;
+	struct device *dev = &epf->dev;
+
+	if (WARN_ON_ONCE(!epc))
+		return -EINVAL;
+
+	ret = pci_epc_write_header(epc, header);
+	if (ret) {
+		dev_err(dev, "configuration header write failed\n");
+		return ret;
+	}
+
+	ret = pci_epf_test_alloc_space(epf);
+	if (ret)
+		return ret;
+
+	ret = pci_epf_test_set_bar(epf);
+	if (ret)
+		return ret;
+
+	ret = pci_epc_set_msi(epc, epf->msi_interrupts);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int pci_epf_test_probe(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test;
+	struct device *dev = &epf->dev;
+
+	epf_test = devm_kzalloc(dev, sizeof(*epf_test), GFP_KERNEL);
+	if (!epf_test)
+		return -ENOMEM;
+
+	epf->header = &test_header;
+	epf_test->epf = epf;
+
+	INIT_DELAYED_WORK(&epf_test->cmd_handler, pci_epf_test_cmd_handler);
+
+	epf_set_drvdata(epf, epf_test);
+	return 0;
+}
+
+static int pci_epf_test_remove(struct pci_epf *epf)
+{
+	struct pci_epf_test *epf_test = epf_get_drvdata(epf);
+
+	kfree(epf_test);
+	return 0;
+}
+
+static struct pci_epf_ops ops = {
+	.unbind	= pci_epf_test_unbind,
+	.bind	= pci_epf_test_bind,
+	.linkup = pci_epf_test_linkup,
+};
+
+static const struct pci_epf_device_id pci_epf_test_ids[] = {
+	{
+		.name = "pci_epf_test",
+	},
+	{},
+};
+
+static struct pci_epf_driver test_driver = {
+	.driver.name	= "pci_epf_test",
+	.probe		= pci_epf_test_probe,
+	.remove		= pci_epf_test_remove,
+	.id_table	= pci_epf_test_ids,
+	.ops		= &ops,
+	.owner		= THIS_MODULE,
+};
+
+static int __init pci_epf_test_init(void)
+{
+	int ret;
+
+	kpcitest_workqueue = alloc_workqueue("kpcitest",
+					     WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
+	ret = pci_epf_register_driver(&test_driver);
+	if (ret) {
+		pr_err("failed to register pci epf test driver --> %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(pci_epf_test_init);
+
+static void __exit pci_epf_test_exit(void)
+{
+	pci_epf_unregister_driver(&test_driver);
+}
+module_exit(pci_epf_test_exit);
+
+MODULE_DESCRIPTION("PCI EPF TEST DRIVER");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
new file mode 100644
index 0000000..424fdd6
--- /dev/null
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -0,0 +1,509 @@
+/**
+ * configfs to configure the PCI endpoint
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct config_group *functions_group;
+static struct config_group *controllers_group;
+
+struct pci_epf_group {
+	struct config_group group;
+	struct pci_epf *epf;
+};
+
+struct pci_epc_group {
+	struct config_group group;
+	struct pci_epc *epc;
+	bool start;
+	unsigned long function_num_map;
+};
+
+static inline struct pci_epf_group *to_pci_epf_group(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct pci_epf_group, group);
+}
+
+static inline struct pci_epc_group *to_pci_epc_group(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct pci_epc_group, group);
+}
+
+static ssize_t pci_epc_start_store(struct config_item *item, const char *page,
+				   size_t len)
+{
+	int ret;
+	bool start;
+	struct pci_epc *epc;
+	struct pci_epc_group *epc_group = to_pci_epc_group(item);
+
+	epc = epc_group->epc;
+
+	ret = kstrtobool(page, &start);
+	if (ret)
+		return ret;
+
+	if (!start) {
+		pci_epc_stop(epc);
+		return len;
+	}
+
+	ret = pci_epc_start(epc);
+	if (ret) {
+		dev_err(&epc->dev, "failed to start endpoint controller\n");
+		return -EINVAL;
+	}
+
+	epc_group->start = start;
+
+	return len;
+}
+
+static ssize_t pci_epc_start_show(struct config_item *item, char *page)
+{
+	return sprintf(page, "%d\n",
+		       to_pci_epc_group(item)->start);
+}
+
+CONFIGFS_ATTR(pci_epc_, start);
+
+static struct configfs_attribute *pci_epc_attrs[] = {
+	&pci_epc_attr_start,
+	NULL,
+};
+
+static int pci_epc_epf_link(struct config_item *epc_item,
+			    struct config_item *epf_item)
+{
+	int ret;
+	u32 func_no = 0;
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	ret = pci_epc_add_epf(epc, epf);
+	if (ret)
+		goto err_add_epf;
+
+	func_no = find_first_zero_bit(&epc_group->function_num_map,
+				      sizeof(epc_group->function_num_map));
+	set_bit(func_no, &epc_group->function_num_map);
+	epf->func_no = func_no;
+
+	ret = pci_epf_bind(epf);
+	if (ret)
+		goto err_epf_bind;
+
+	return 0;
+
+err_epf_bind:
+	pci_epc_remove_epf(epc, epf);
+
+err_add_epf:
+	clear_bit(func_no, &epc_group->function_num_map);
+
+	return ret;
+}
+
+static void pci_epc_epf_unlink(struct config_item *epc_item,
+			       struct config_item *epf_item)
+{
+	struct pci_epc *epc;
+	struct pci_epf *epf;
+	struct pci_epf_group *epf_group = to_pci_epf_group(epf_item);
+	struct pci_epc_group *epc_group = to_pci_epc_group(epc_item);
+
+	WARN_ON_ONCE(epc_group->start);
+
+	epc = epc_group->epc;
+	epf = epf_group->epf;
+	clear_bit(epf->func_no, &epc_group->function_num_map);
+	pci_epf_unbind(epf);
+	pci_epc_remove_epf(epc, epf);
+}
+
+static struct configfs_item_operations pci_epc_item_ops = {
+	.allow_link	= pci_epc_epf_link,
+	.drop_link	= pci_epc_epf_unlink,
+};
+
+static struct config_item_type pci_epc_type = {
+	.ct_item_ops	= &pci_epc_item_ops,
+	.ct_attrs	= pci_epc_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+	int ret;
+	struct pci_epc *epc;
+	struct config_group *group;
+	struct pci_epc_group *epc_group;
+
+	epc_group = kzalloc(sizeof(*epc_group), GFP_KERNEL);
+	if (!epc_group) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	group = &epc_group->group;
+
+	config_group_init_type_name(group, name, &pci_epc_type);
+	ret = configfs_register_group(controllers_group, group);
+	if (ret) {
+		pr_err("failed to register configfs group for %s\n", name);
+		goto err_register_group;
+	}
+
+	epc = pci_epc_get(name);
+	if (IS_ERR(epc)) {
+		ret = PTR_ERR(epc);
+		goto err_epc_get;
+	}
+
+	epc_group->epc = epc;
+
+	return group;
+
+err_epc_get:
+	configfs_unregister_group(group);
+
+err_register_group:
+	kfree(epc_group);
+
+err:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epc_group);
+
+void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+	struct pci_epc_group *epc_group;
+
+	if (!group)
+		return;
+
+	epc_group = container_of(group, struct pci_epc_group, group);
+	pci_epc_put(epc_group->epc);
+	configfs_unregister_group(&epc_group->group);
+	kfree(epc_group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epc_group);
+
+#define PCI_EPF_HEADER_R(_name)						       \
+static ssize_t pci_epf_##_name##_show(struct config_item *item,	char *page)    \
+{									       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	return sprintf(page, "0x%04x\n", epf->header->_name);		       \
+}
+
+#define PCI_EPF_HEADER_W_u32(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u32 val;							       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou32(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+#define PCI_EPF_HEADER_W_u16(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u16 val;							       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou16(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+#define PCI_EPF_HEADER_W_u8(_name)					       \
+static ssize_t pci_epf_##_name##_store(struct config_item *item,	       \
+				       const char *page, size_t len)	       \
+{									       \
+	u8 val;								       \
+	int ret;							       \
+	struct pci_epf *epf = to_pci_epf_group(item)->epf;		       \
+	if (WARN_ON_ONCE(!epf->header))					       \
+		return -EINVAL;						       \
+	ret = kstrtou8(page, 0, &val);					       \
+	if (ret)							       \
+		return ret;						       \
+	epf->header->_name = val;					       \
+	return len;							       \
+}
+
+static ssize_t pci_epf_msi_interrupts_store(struct config_item *item,
+					    const char *page, size_t len)
+{
+	u8 val;
+	int ret;
+
+	ret = kstrtou8(page, 0, &val);
+	if (ret)
+		return ret;
+
+	to_pci_epf_group(item)->epf->msi_interrupts = val;
+
+	return len;
+}
+
+static ssize_t pci_epf_msi_interrupts_show(struct config_item *item,
+					   char *page)
+{
+	return sprintf(page, "%d\n",
+		       to_pci_epf_group(item)->epf->msi_interrupts);
+}
+
+PCI_EPF_HEADER_R(vendorid)
+PCI_EPF_HEADER_W_u16(vendorid)
+
+PCI_EPF_HEADER_R(deviceid)
+PCI_EPF_HEADER_W_u16(deviceid)
+
+PCI_EPF_HEADER_R(revid)
+PCI_EPF_HEADER_W_u8(revid)
+
+PCI_EPF_HEADER_R(progif_code)
+PCI_EPF_HEADER_W_u8(progif_code)
+
+PCI_EPF_HEADER_R(subclass_code)
+PCI_EPF_HEADER_W_u8(subclass_code)
+
+PCI_EPF_HEADER_R(baseclass_code)
+PCI_EPF_HEADER_W_u8(baseclass_code)
+
+PCI_EPF_HEADER_R(cache_line_size)
+PCI_EPF_HEADER_W_u8(cache_line_size)
+
+PCI_EPF_HEADER_R(subsys_vendor_id)
+PCI_EPF_HEADER_W_u16(subsys_vendor_id)
+
+PCI_EPF_HEADER_R(subsys_id)
+PCI_EPF_HEADER_W_u16(subsys_id)
+
+PCI_EPF_HEADER_R(interrupt_pin)
+PCI_EPF_HEADER_W_u8(interrupt_pin)
+
+CONFIGFS_ATTR(pci_epf_, vendorid);
+CONFIGFS_ATTR(pci_epf_, deviceid);
+CONFIGFS_ATTR(pci_epf_, revid);
+CONFIGFS_ATTR(pci_epf_, progif_code);
+CONFIGFS_ATTR(pci_epf_, subclass_code);
+CONFIGFS_ATTR(pci_epf_, baseclass_code);
+CONFIGFS_ATTR(pci_epf_, cache_line_size);
+CONFIGFS_ATTR(pci_epf_, subsys_vendor_id);
+CONFIGFS_ATTR(pci_epf_, subsys_id);
+CONFIGFS_ATTR(pci_epf_, interrupt_pin);
+CONFIGFS_ATTR(pci_epf_, msi_interrupts);
+
+static struct configfs_attribute *pci_epf_attrs[] = {
+	&pci_epf_attr_vendorid,
+	&pci_epf_attr_deviceid,
+	&pci_epf_attr_revid,
+	&pci_epf_attr_progif_code,
+	&pci_epf_attr_subclass_code,
+	&pci_epf_attr_baseclass_code,
+	&pci_epf_attr_cache_line_size,
+	&pci_epf_attr_subsys_vendor_id,
+	&pci_epf_attr_subsys_id,
+	&pci_epf_attr_interrupt_pin,
+	&pci_epf_attr_msi_interrupts,
+	NULL,
+};
+
+static void pci_epf_release(struct config_item *item)
+{
+	struct pci_epf_group *epf_group = to_pci_epf_group(item);
+
+	pci_epf_destroy(epf_group->epf);
+	kfree(epf_group);
+}
+
+static struct configfs_item_operations pci_epf_ops = {
+	.release		= pci_epf_release,
+};
+
+static struct config_item_type pci_epf_type = {
+	.ct_item_ops	= &pci_epf_ops,
+	.ct_attrs	= pci_epf_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_group *pci_epf_make(struct config_group *group,
+					 const char *name)
+{
+	struct pci_epf_group *epf_group;
+	struct pci_epf *epf;
+
+	epf_group = kzalloc(sizeof(*epf_group), GFP_KERNEL);
+	if (!epf_group)
+		return ERR_PTR(-ENOMEM);
+
+	config_group_init_type_name(&epf_group->group, name, &pci_epf_type);
+
+	epf = pci_epf_create(group->cg_item.ci_name);
+	if (IS_ERR(epf)) {
+		pr_err("failed to create endpoint function device\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	epf_group->epf = epf;
+
+	return &epf_group->group;
+}
+
+static void pci_epf_drop(struct config_group *group, struct config_item *item)
+{
+	config_item_put(item);
+}
+
+static struct configfs_group_operations pci_epf_group_ops = {
+	.make_group     = &pci_epf_make,
+	.drop_item      = &pci_epf_drop,
+};
+
+static struct config_item_type pci_epf_group_type = {
+	.ct_group_ops	= &pci_epf_group_ops,
+	.ct_owner	= THIS_MODULE,
+};
+
+struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+	struct config_group *group;
+
+	group = configfs_register_default_group(functions_group, name,
+						&pci_epf_group_type);
+	if (IS_ERR(group))
+		pr_err("failed to register configfs group for %s function\n",
+		       name);
+
+	return group;
+}
+EXPORT_SYMBOL(pci_ep_cfs_add_epf_group);
+
+void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+	if (IS_ERR_OR_NULL(group))
+		return;
+
+	configfs_unregister_default_group(group);
+}
+EXPORT_SYMBOL(pci_ep_cfs_remove_epf_group);
+
+static struct config_item_type pci_functions_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item_type pci_controllers_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct config_item_type pci_ep_type = {
+	.ct_owner	= THIS_MODULE,
+};
+
+static struct configfs_subsystem pci_ep_cfs_subsys = {
+	.su_group = {
+		.cg_item = {
+			.ci_namebuf = "pci_ep",
+			.ci_type = &pci_ep_type,
+		},
+	},
+	.su_mutex = __MUTEX_INITIALIZER(pci_ep_cfs_subsys.su_mutex),
+};
+
+static int __init pci_ep_cfs_init(void)
+{
+	int ret;
+	struct config_group *root = &pci_ep_cfs_subsys.su_group;
+
+	config_group_init(root);
+
+	ret = configfs_register_subsystem(&pci_ep_cfs_subsys);
+	if (ret) {
+		pr_err("Error %d while registering subsystem %s\n",
+		       ret, root->cg_item.ci_namebuf);
+		goto err;
+	}
+
+	functions_group = configfs_register_default_group(root, "functions",
+							  &pci_functions_type);
+	if (IS_ERR(functions_group)) {
+		ret = PTR_ERR(functions_group);
+		pr_err("Error %d while registering functions group\n",
+		       ret);
+		goto err_functions_group;
+	}
+
+	controllers_group =
+		configfs_register_default_group(root, "controllers",
+						&pci_controllers_type);
+	if (IS_ERR(controllers_group)) {
+		ret = PTR_ERR(controllers_group);
+		pr_err("Error %d while registering controllers group\n",
+		       ret);
+		goto err_controllers_group;
+	}
+
+	return 0;
+
+err_controllers_group:
+	configfs_unregister_default_group(functions_group);
+
+err_functions_group:
+	configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+
+err:
+	return ret;
+}
+module_init(pci_ep_cfs_init);
+
+static void __exit pci_ep_cfs_exit(void)
+{
+	configfs_unregister_default_group(controllers_group);
+	configfs_unregister_default_group(functions_group);
+	configfs_unregister_subsystem(&pci_ep_cfs_subsys);
+}
+module_exit(pci_ep_cfs_exit);
+
+MODULE_DESCRIPTION("PCI EP CONFIGFS");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
new file mode 100644
index 0000000..caa7be1
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -0,0 +1,580 @@
+/**
+ * PCI Endpoint *Controller* (EPC) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct class *pci_epc_class;
+
+static void devm_pci_epc_release(struct device *dev, void *res)
+{
+	struct pci_epc *epc = *(struct pci_epc **)res;
+
+	pci_epc_destroy(epc);
+}
+
+static int devm_pci_epc_match(struct device *dev, void *res, void *match_data)
+{
+	struct pci_epc **epc = res;
+
+	return *epc == match_data;
+}
+
+/**
+ * pci_epc_put() - release the PCI endpoint controller
+ * @epc: epc returned by pci_epc_get()
+ *
+ * release the refcount the caller obtained by invoking pci_epc_get()
+ */
+void pci_epc_put(struct pci_epc *epc)
+{
+	if (!epc || IS_ERR(epc))
+		return;
+
+	module_put(epc->ops->owner);
+	put_device(&epc->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epc_put);
+
+/**
+ * pci_epc_get() - get the PCI endpoint controller
+ * @epc_name: device name of the endpoint controller
+ *
+ * Invoke to get struct pci_epc * corresponding to the device name of the
+ * endpoint controller
+ */
+struct pci_epc *pci_epc_get(const char *epc_name)
+{
+	int ret = -EINVAL;
+	struct pci_epc *epc;
+	struct device *dev;
+	struct class_dev_iter iter;
+
+	class_dev_iter_init(&iter, pci_epc_class, NULL, NULL);
+	while ((dev = class_dev_iter_next(&iter))) {
+		if (strcmp(epc_name, dev_name(dev)))
+			continue;
+
+		epc = to_pci_epc(dev);
+		if (!try_module_get(epc->ops->owner)) {
+			ret = -EINVAL;
+			goto err;
+		}
+
+		class_dev_iter_exit(&iter);
+		get_device(&epc->dev);
+		return epc;
+	}
+
+err:
+	class_dev_iter_exit(&iter);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epc_get);
+
+/**
+ * pci_epc_stop() - stop the PCI link
+ * @epc: the link of the EPC device that has to be stopped
+ *
+ * Invoke to stop the PCI link
+ */
+void pci_epc_stop(struct pci_epc *epc)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc) || !epc->ops->stop)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->stop(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_stop);
+
+/**
+ * pci_epc_start() - start the PCI link
+ * @epc: the link of *this* EPC device has to be started
+ *
+ * Invoke to start the PCI link
+ */
+int pci_epc_start(struct pci_epc *epc)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->start)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->start(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_start);
+
+/**
+ * pci_epc_raise_irq() - interrupt the host system
+ * @epc: the EPC device which has to interrupt the host
+ * @type: specify the type of interrupt; legacy or MSI
+ * @interrupt_num: the MSI interrupt number
+ *
+ * Invoke to raise an MSI or legacy interrupt
+ */
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+		      u8 interrupt_num)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->raise_irq)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->raise_irq(epc, type, interrupt_num);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
+
+/**
+ * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
+ * @epc: the EPC device to which MSI interrupts was requested
+ *
+ * Invoke to get the number of MSI interrupts allocated by the RC
+ */
+int pci_epc_get_msi(struct pci_epc *epc)
+{
+	int interrupt;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return 0;
+
+	if (!epc->ops->get_msi)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	interrupt = epc->ops->get_msi(epc);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	if (interrupt < 0)
+		return 0;
+
+	interrupt = 1 << interrupt;
+
+	return interrupt;
+}
+EXPORT_SYMBOL_GPL(pci_epc_get_msi);
+
+/**
+ * pci_epc_set_msi() - set the number of MSI interrupt numbers required
+ * @epc: the EPC device on which MSI has to be configured
+ * @interrupts: number of MSI interrupts required by the EPF
+ *
+ * Invoke to set the required number of MSI interrupts.
+ */
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts)
+{
+	int ret;
+	u8 encode_int;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->set_msi)
+		return 0;
+
+	encode_int = order_base_2(interrupts);
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->set_msi(epc, encode_int);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_msi);
+
+/**
+ * pci_epc_unmap_addr() - unmap CPU address from PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ *
+ * Invoke to unmap the CPU address from PCI address.
+ */
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return;
+
+	if (!epc->ops->unmap_addr)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->unmap_addr(epc, phys_addr);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
+
+/**
+ * pci_epc_map_addr() - map CPU address to PCI address
+ * @epc: the EPC device on which address is allocated
+ * @phys_addr: physical address of the local system
+ * @pci_addr: PCI address to which the physical address should be mapped
+ * @size: the size of the allocation
+ *
+ * Invoke to map CPU address with PCI address.
+ */
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+		     u64 pci_addr, size_t size)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->map_addr)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->map_addr(epc, phys_addr, pci_addr, size);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_map_addr);
+
+/**
+ * pci_epc_clear_bar() - reset the BAR
+ * @epc: the EPC device for which the BAR has to be cleared
+ * @bar: the BAR number that has to be reset
+ *
+ * Invoke to reset the BAR of the endpoint device.
+ */
+void pci_epc_clear_bar(struct pci_epc *epc, int bar)
+{
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return;
+
+	if (!epc->ops->clear_bar)
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	epc->ops->clear_bar(epc, bar);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
+
+/**
+ * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
+ * @epc: the EPC device on which BAR has to be configured
+ * @bar: the BAR number that has to be configured
+ * @size: the size of the addr space
+ * @flags: specify memory allocation/io allocation/32bit address/64 bit address
+ *
+ * Invoke to configure the BAR of the endpoint device.
+ */
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+		    dma_addr_t bar_phys, size_t size, int flags)
+{
+	int ret;
+	unsigned long irq_flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->set_bar)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, irq_flags);
+	ret = epc->ops->set_bar(epc, bar, bar_phys, size, flags);
+	spin_unlock_irqrestore(&epc->lock, irq_flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_set_bar);
+
+/**
+ * pci_epc_write_header() - write standard configuration header
+ * @epc: the EPC device to which the configuration header should be written
+ * @header: standard configuration header fields
+ *
+ * Invoke to write the configuration header to the endpoint controller. Every
+ * endpoint controller will have a dedicated location to which the standard
+ * configuration header would be written. The callback function should write
+ * the header fields to this dedicated location.
+ */
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *header)
+{
+	int ret;
+	unsigned long flags;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (!epc->ops->write_header)
+		return 0;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	ret = epc->ops->write_header(epc, header);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_write_header);
+
+/**
+ * pci_epc_add_epf() - bind PCI endpoint function to an endpoint controller
+ * @epc: the EPC device to which the endpoint function should be added
+ * @epf: the endpoint function to be added
+ *
+ * A PCI endpoint device can have one or more functions. In the case of PCIe,
+ * the specification allows up to 8 PCIe endpoint functions. Invoke
+ * pci_epc_add_epf() to add a PCI endpoint function to an endpoint controller.
+ */
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+	unsigned long flags;
+
+	if (epf->epc)
+		return -EBUSY;
+
+	if (IS_ERR(epc))
+		return -EINVAL;
+
+	if (epf->func_no > epc->max_functions - 1)
+		return -EINVAL;
+
+	epf->epc = epc;
+	dma_set_coherent_mask(&epf->dev, epc->dev.coherent_dma_mask);
+	epf->dev.dma_mask = epc->dev.dma_mask;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_add_tail(&epf->list, &epc->pci_epf);
+	spin_unlock_irqrestore(&epc->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_epc_add_epf);
+
+/**
+ * pci_epc_remove_epf() - remove PCI endpoint function from endpoint controller
+ * @epc: the EPC device from which the endpoint function should be removed
+ * @epf: the endpoint function to be removed
+ *
+ * Invoke to remove PCI endpoint function from the endpoint controller.
+ */
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf)
+{
+	unsigned long flags;
+
+	if (!epc || IS_ERR(epc))
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_del(&epf->list);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_remove_epf);
+
+/**
+ * pci_epc_linkup() - Notify the EPF device that EPC device has established a
+ *		      connection with the Root Complex.
+ * @epc: the EPC device which has established link with the host
+ *
+ * Invoke to Notify the EPF device that the EPC device has established a
+ * connection with the Root Complex.
+ */
+void pci_epc_linkup(struct pci_epc *epc)
+{
+	unsigned long flags;
+	struct pci_epf *epf;
+
+	if (!epc || IS_ERR(epc))
+		return;
+
+	spin_lock_irqsave(&epc->lock, flags);
+	list_for_each_entry(epf, &epc->pci_epf, list)
+		pci_epf_linkup(epf);
+	spin_unlock_irqrestore(&epc->lock, flags);
+}
+EXPORT_SYMBOL_GPL(pci_epc_linkup);
+
+/**
+ * pci_epc_destroy() - destroy the EPC device
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the PCI EPC device
+ */
+void pci_epc_destroy(struct pci_epc *epc)
+{
+	pci_ep_cfs_remove_epc_group(epc->group);
+	device_unregister(&epc->dev);
+	kfree(epc);
+}
+EXPORT_SYMBOL_GPL(pci_epc_destroy);
+
+/**
+ * devm_pci_epc_destroy() - destroy the EPC device
+ * @dev: device that wants to destroy the EPC
+ * @epc: the EPC device that has to be destroyed
+ *
+ * Invoke to destroy the devres associated with this
+ * pci_epc and destroy the EPC device.
+ */
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc)
+{
+	int r;
+
+	r = devres_destroy(dev, devm_pci_epc_release, devm_pci_epc_match,
+			   epc);
+	dev_WARN_ONCE(dev, r, "couldn't find PCI EPC resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_pci_epc_destroy);
+
+/**
+ * __pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ */
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		 struct module *owner)
+{
+	int ret;
+	struct pci_epc *epc;
+
+	if (WARN_ON(!dev)) {
+		ret = -EINVAL;
+		goto err_ret;
+	}
+
+	epc = kzalloc(sizeof(*epc), GFP_KERNEL);
+	if (!epc) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	spin_lock_init(&epc->lock);
+	INIT_LIST_HEAD(&epc->pci_epf);
+
+	device_initialize(&epc->dev);
+	dma_set_coherent_mask(&epc->dev, dev->coherent_dma_mask);
+	epc->dev.class = pci_epc_class;
+	epc->dev.dma_mask = dev->dma_mask;
+	epc->ops = ops;
+
+	ret = dev_set_name(&epc->dev, "%s", dev_name(dev));
+	if (ret)
+		goto put_dev;
+
+	ret = device_add(&epc->dev);
+	if (ret)
+		goto put_dev;
+
+	epc->group = pci_ep_cfs_add_epc_group(dev_name(dev));
+
+	return epc;
+
+put_dev:
+	put_device(&epc->dev);
+	kfree(epc);
+
+err_ret:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(__pci_epc_create);
+
+/**
+ * __devm_pci_epc_create() - create a new endpoint controller (EPC) device
+ * @dev: device that is creating the new EPC
+ * @ops: function pointers for performing EPC operations
+ * @owner: the owner of the module that creates the EPC device
+ *
+ * Invoke to create a new EPC device and add it to pci_epc class.
+ * While at that, it also associates the device with the pci_epc using devres.
+ * On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ */
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		      struct module *owner)
+{
+	struct pci_epc **ptr, *epc;
+
+	ptr = devres_alloc(devm_pci_epc_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	epc = __pci_epc_create(dev, ops, owner);
+	if (!IS_ERR(epc)) {
+		*ptr = epc;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return epc;
+}
+EXPORT_SYMBOL_GPL(__devm_pci_epc_create);
+
+static int __init pci_epc_init(void)
+{
+	pci_epc_class = class_create(THIS_MODULE, "pci_epc");
+	if (IS_ERR(pci_epc_class)) {
+		pr_err("failed to create pci epc class --> %ld\n",
+		       PTR_ERR(pci_epc_class));
+		return PTR_ERR(pci_epc_class);
+	}
+
+	return 0;
+}
+module_init(pci_epc_init);
+
+static void __exit pci_epc_exit(void)
+{
+	class_destroy(pci_epc_class);
+}
+module_exit(pci_epc_exit);
+
+MODULE_DESCRIPTION("PCI EPC Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
new file mode 100644
index 0000000..3a94cc1
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epc-mem.c
@@ -0,0 +1,143 @@
+/**
+ * PCI Endpoint *Controller* Address Space Management
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/pci-epc.h>
+
+/**
+ * pci_epc_mem_init() - initialize the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_init
+ * @phys_base: the physical address of the base
+ * @size: the size of the address space
+ *
+ * Invoke to initialize the pci_epc_mem structure used by the
+ * endpoint functions to allocate mapped PCI address.
+ */
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_base, size_t size)
+{
+	int ret;
+	struct pci_epc_mem *mem;
+	unsigned long *bitmap;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+	mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+	if (!mem) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!bitmap) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	mem->bitmap = bitmap;
+	mem->phys_base = phys_base;
+	mem->pages = pages;
+	mem->size = size;
+
+	epc->mem = mem;
+
+	return 0;
+
+err_mem:
+	kfree(mem);
+
+err:
+return ret;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_init);
+
+/**
+ * pci_epc_mem_exit() - cleanup the pci_epc_mem structure
+ * @epc: the EPC device that invoked pci_epc_mem_exit
+ *
+ * Invoke to cleanup the pci_epc_mem structure allocated in
+ * pci_epc_mem_init().
+ */
+void pci_epc_mem_exit(struct pci_epc *epc)
+{
+	struct pci_epc_mem *mem = epc->mem;
+
+	epc->mem = NULL;
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_exit);
+
+/**
+ * pci_epc_mem_alloc_addr() - allocate memory address from EPC addr space
+ * @epc: the EPC device on which memory has to be allocated
+ * @phys_addr: populate the allocated physical address here
+ * @size: the size of the address space that has to be allocated
+ *
+ * Invoke to allocate memory address from the EPC address space. This
+ * is usually done to map the remote RC address into the local system.
+ */
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+				     phys_addr_t *phys_addr, size_t size)
+{
+	int pageno;
+	void __iomem *virt_addr;
+	struct pci_epc_mem *mem = epc->mem;
+	int order = get_order(size);
+
+	pageno = bitmap_find_free_region(mem->bitmap, mem->pages, order);
+	if (pageno < 0)
+		return NULL;
+
+	*phys_addr = mem->phys_base + (pageno << PAGE_SHIFT);
+	virt_addr = ioremap(*phys_addr, size);
+	if (!virt_addr)
+		bitmap_release_region(mem->bitmap, pageno, order);
+
+	return virt_addr;
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_alloc_addr);
+
+/**
+ * pci_epc_mem_free_addr() - free the allocated memory address
+ * @epc: the EPC device on which memory was allocated
+ * @phys_addr: the allocated physical address
+ * @virt_addr: virtual address of the allocated mem space
+ * @size: the size of the allocated address space
+ *
+ * Invoke to free the memory allocated using pci_epc_mem_alloc_addr.
+ */
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+			   void __iomem *virt_addr, size_t size)
+{
+	int pageno;
+	int order = get_order(size);
+	struct pci_epc_mem *mem = epc->mem;
+
+	iounmap(virt_addr);
+	pageno = (phys_addr - mem->phys_base) >> PAGE_SHIFT;
+	bitmap_release_region(mem->bitmap, pageno, order);
+}
+EXPORT_SYMBOL_GPL(pci_epc_mem_free_addr);
+
+MODULE_DESCRIPTION("PCI EPC Address Space Management");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
new file mode 100644
index 0000000..6877d6a
--- /dev/null
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -0,0 +1,359 @@
+/**
+ * PCI Endpoint *Function* (EPF) library
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <linux/pci-epc.h>
+#include <linux/pci-epf.h>
+#include <linux/pci-ep-cfs.h>
+
+static struct bus_type pci_epf_bus_type;
+static struct device_type pci_epf_type;
+
+/**
+ * pci_epf_linkup() - Notify the function driver that EPC device has
+ *		      established a connection with the Root Complex.
+ * @epf: the EPF device bound to the EPC device which has established
+ *	 the connection with the host
+ *
+ * Invoke to notify the function driver that EPC device has established
+ * a connection with the Root Complex.
+ */
+void pci_epf_linkup(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return;
+	}
+
+	epf->driver->ops->linkup(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_linkup);
+
+/**
+ * pci_epf_unbind() - Notify the function driver that the binding between the
+ *		      EPF device and EPC device has been lost
+ * @epf: the EPF device which has lost the binding with the EPC device
+ *
+ * Invoke to notify the function driver that the binding between the EPF device
+ * and EPC device has been lost.
+ */
+void pci_epf_unbind(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return;
+	}
+
+	epf->driver->ops->unbind(epf);
+	module_put(epf->driver->owner);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unbind);
+
+/**
+ * pci_epf_bind() - Notify the function driver that the EPF device has been
+ *		    bound to a EPC device
+ * @epf: the EPF device which has been bound to the EPC device
+ *
+ * Invoke to notify the function driver that it has been bound to a EPC device
+ */
+int pci_epf_bind(struct pci_epf *epf)
+{
+	if (!epf->driver) {
+		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		return -EINVAL;
+	}
+
+	if (!try_module_get(epf->driver->owner))
+		return -EAGAIN;
+
+	return epf->driver->ops->bind(epf);
+}
+EXPORT_SYMBOL_GPL(pci_epf_bind);
+
+/**
+ * pci_epf_free_space() - free the allocated PCI EPF register space
+ * @addr: the virtual address of the PCI EPF register space
+ * @bar: the BAR number corresponding to the register space
+ *
+ * Invoke to free the allocated PCI EPF register space.
+ */
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar)
+{
+	struct device *dev = &epf->dev;
+
+	if (!addr)
+		return;
+
+	dma_free_coherent(dev, epf->bar[bar].size, addr,
+			  epf->bar[bar].phys_addr);
+
+	epf->bar[bar].phys_addr = 0;
+	epf->bar[bar].size = 0;
+}
+EXPORT_SYMBOL_GPL(pci_epf_free_space);
+
+/**
+ * pci_epf_alloc_space() - allocate memory for the PCI EPF register space
+ * @size: the size of the memory that has to be allocated
+ * @bar: the BAR number corresponding to the allocated register space
+ *
+ * Invoke to allocate memory for the PCI EPF register space.
+ */
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar)
+{
+	void *space;
+	struct device *dev = &epf->dev;
+	dma_addr_t phys_addr;
+
+	if (size < 128)
+		size = 128;
+	size = roundup_pow_of_two(size);
+
+	space = dma_alloc_coherent(dev, size, &phys_addr, GFP_KERNEL);
+	if (!space) {
+		dev_err(dev, "failed to allocate mem space\n");
+		return NULL;
+	}
+
+	epf->bar[bar].phys_addr = phys_addr;
+	epf->bar[bar].size = size;
+
+	return space;
+}
+EXPORT_SYMBOL_GPL(pci_epf_alloc_space);
+
+/**
+ * pci_epf_unregister_driver() - unregister the PCI EPF driver
+ * @driver: the PCI EPF driver that has to be unregistered
+ *
+ * Invoke to unregister the PCI EPF driver.
+ */
+void pci_epf_unregister_driver(struct pci_epf_driver *driver)
+{
+	pci_ep_cfs_remove_epf_group(driver->group);
+	driver_unregister(&driver->driver);
+}
+EXPORT_SYMBOL_GPL(pci_epf_unregister_driver);
+
+/**
+ * __pci_epf_register_driver() - register a new PCI EPF driver
+ * @driver: structure representing PCI EPF driver
+ * @owner: the owner of the module that registers the PCI EPF driver
+ *
+ * Invoke to register a new PCI EPF driver.
+ */
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+			      struct module *owner)
+{
+	int ret;
+
+	if (!driver->ops)
+		return -EINVAL;
+
+	if (!driver->ops->bind || !driver->ops->unbind || !driver->ops->linkup)
+		return -EINVAL;
+
+	driver->driver.bus = &pci_epf_bus_type;
+	driver->driver.owner = owner;
+
+	ret = driver_register(&driver->driver);
+	if (ret)
+		return ret;
+
+	driver->group = pci_ep_cfs_add_epf_group(driver->driver.name);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__pci_epf_register_driver);
+
+/**
+ * pci_epf_destroy() - destroy the created PCI EPF device
+ * @epf: the PCI EPF device that has to be destroyed.
+ *
+ * Invoke to destroy the PCI EPF device created by invoking pci_epf_create().
+ */
+void pci_epf_destroy(struct pci_epf *epf)
+{
+	device_unregister(&epf->dev);
+}
+EXPORT_SYMBOL_GPL(pci_epf_destroy);
+
+/**
+ * pci_epf_create() - create a new PCI EPF device
+ * @name: the name of the PCI EPF device. This name will be used to bind the
+ *	  the EPF device to a EPF driver
+ *
+ * Invoke to create a new PCI EPF device by providing the name of the function
+ * device.
+ */
+struct pci_epf *pci_epf_create(const char *name)
+{
+	int ret;
+	struct pci_epf *epf;
+	struct device *dev;
+	char *func_name;
+	char *buf;
+
+	epf = kzalloc(sizeof(*epf), GFP_KERNEL);
+	if (!epf) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	buf = kstrdup(name, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto free_epf;
+	}
+
+	func_name = buf;
+	buf = strchrnul(buf, '.');
+	*buf = '\0';
+
+	epf->name = kstrdup(func_name, GFP_KERNEL);
+	if (!epf->name) {
+		ret = -ENOMEM;
+		goto free_func_name;
+	}
+
+	dev = &epf->dev;
+	device_initialize(dev);
+	dev->bus = &pci_epf_bus_type;
+	dev->type = &pci_epf_type;
+
+	ret = dev_set_name(dev, "%s", name);
+	if (ret)
+		goto put_dev;
+
+	ret = device_add(dev);
+	if (ret)
+		goto put_dev;
+
+	kfree(func_name);
+	return epf;
+
+put_dev:
+	put_device(dev);
+	kfree(epf->name);
+
+free_func_name:
+	kfree(func_name);
+
+free_epf:
+	kfree(epf);
+
+err_ret:
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(pci_epf_create);
+
+static void pci_epf_dev_release(struct device *dev)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+
+	kfree(epf->name);
+	kfree(epf);
+}
+
+static struct device_type pci_epf_type = {
+	.release	= pci_epf_dev_release,
+};
+
+static int
+pci_epf_match_id(const struct pci_epf_device_id *id, const struct pci_epf *epf)
+{
+	while (id->name[0]) {
+		if (strcmp(epf->name, id->name) == 0)
+			return true;
+		id++;
+	}
+
+	return false;
+}
+
+static int pci_epf_device_match(struct device *dev, struct device_driver *drv)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(drv);
+
+	if (driver->id_table)
+		return pci_epf_match_id(driver->id_table, epf);
+
+	return !strcmp(epf->name, drv->name);
+}
+
+static int pci_epf_device_probe(struct device *dev)
+{
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+	if (!driver->probe)
+		return -ENODEV;
+
+	epf->driver = driver;
+
+	return driver->probe(epf);
+}
+
+static int pci_epf_device_remove(struct device *dev)
+{
+	int ret;
+	struct pci_epf *epf = to_pci_epf(dev);
+	struct pci_epf_driver *driver = to_pci_epf_driver(dev->driver);
+
+	ret = driver->remove(epf);
+	epf->driver = NULL;
+
+	return ret;
+}
+
+static struct bus_type pci_epf_bus_type = {
+	.name		= "pci-epf",
+	.match		= pci_epf_device_match,
+	.probe		= pci_epf_device_probe,
+	.remove		= pci_epf_device_remove,
+};
+
+static int __init pci_epf_init(void)
+{
+	int ret;
+
+	ret = bus_register(&pci_epf_bus_type);
+	if (ret) {
+		pr_err("failed to register pci epf bus --> %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+module_init(pci_epf_init);
+
+static void __exit pci_epf_exit(void)
+{
+	bus_unregister(&pci_epf_bus_type);
+}
+module_exit(pci_epf_exit);
+
+MODULE_DESCRIPTION("PCI EPF Library");
+MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index f7c1d4d..aa23b70 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -27,6 +27,12 @@
 	 or End Point. The current option selection will only
 	 support root port enabling.
 
+config PCI_FTPCI100
+	bool "Faraday Technology FTPCI100 PCI controller"
+	depends on OF
+	depends on ARM
+	default ARCH_GEMINI
+
 config PCI_TEGRA
 	bool "NVIDIA Tegra PCIe controller"
 	depends on ARCH_TEGRA
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 4d36866..cab8795 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c
new file mode 100644
index 0000000..c0f29d1
--- /dev/null
+++ b/drivers/pci/host/pci-ftpci100.c
@@ -0,0 +1,562 @@
+/*
+ * Support for Faraday Technology FTPC100 PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the out-of-tree OpenWRT patch for Cortina Gemini:
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+/*
+ * Special configuration registers directly in the first few words
+ * in I/O space.
+ */
+#define PCI_IOSIZE	0x00
+#define PCI_PROT	0x04 /* AHB protection */
+#define PCI_CTRL	0x08 /* PCI control signal */
+#define PCI_SOFTRST	0x10 /* Soft reset counter and response error enable */
+#define PCI_CONFIG	0x28 /* PCI configuration command register */
+#define PCI_DATA	0x2C
+
+#define FARADAY_PCI_PMC			0x40 /* Power management control */
+#define FARADAY_PCI_PMCSR		0x44 /* Power management status */
+#define FARADAY_PCI_CTRL1		0x48 /* Control register 1 */
+#define FARADAY_PCI_CTRL2		0x4C /* Control register 2 */
+#define FARADAY_PCI_MEM1_BASE_SIZE	0x50 /* Memory base and size #1 */
+#define FARADAY_PCI_MEM2_BASE_SIZE	0x54 /* Memory base and size #2 */
+#define FARADAY_PCI_MEM3_BASE_SIZE	0x58 /* Memory base and size #3 */
+
+/* Bits 31..28 gives INTD..INTA status */
+#define PCI_CTRL2_INTSTS_SHIFT		28
+#define PCI_CTRL2_INTMASK_CMDERR	BIT(27)
+#define PCI_CTRL2_INTMASK_PARERR	BIT(26)
+/* Bits 25..22 masks INTD..INTA */
+#define PCI_CTRL2_INTMASK_SHIFT		22
+#define PCI_CTRL2_INTMASK_MABRT_RX	BIT(21)
+#define PCI_CTRL2_INTMASK_TABRT_RX	BIT(20)
+#define PCI_CTRL2_INTMASK_TABRT_TX	BIT(19)
+#define PCI_CTRL2_INTMASK_RETRY4	BIT(18)
+#define PCI_CTRL2_INTMASK_SERR_RX	BIT(17)
+#define PCI_CTRL2_INTMASK_PERR_RX	BIT(16)
+/* Bit 15 reserved */
+#define PCI_CTRL2_MSTPRI_REQ6		BIT(14)
+#define PCI_CTRL2_MSTPRI_REQ5		BIT(13)
+#define PCI_CTRL2_MSTPRI_REQ4		BIT(12)
+#define PCI_CTRL2_MSTPRI_REQ3		BIT(11)
+#define PCI_CTRL2_MSTPRI_REQ2		BIT(10)
+#define PCI_CTRL2_MSTPRI_REQ1		BIT(9)
+#define PCI_CTRL2_MSTPRI_REQ0		BIT(8)
+/* Bits 7..4 reserved */
+/* Bits 3..0 TRDYW */
+
+/*
+ * Memory configs:
+ * Bit 31..20 defines the PCI side memory base
+ * Bit 19..16 (4 bits) defines the size per below
+ */
+#define FARADAY_PCI_MEMBASE_MASK	0xfff00000
+#define FARADAY_PCI_MEMSIZE_1MB		0x0
+#define FARADAY_PCI_MEMSIZE_2MB		0x1
+#define FARADAY_PCI_MEMSIZE_4MB		0x2
+#define FARADAY_PCI_MEMSIZE_8MB		0x3
+#define FARADAY_PCI_MEMSIZE_16MB	0x4
+#define FARADAY_PCI_MEMSIZE_32MB	0x5
+#define FARADAY_PCI_MEMSIZE_64MB	0x6
+#define FARADAY_PCI_MEMSIZE_128MB	0x7
+#define FARADAY_PCI_MEMSIZE_256MB	0x8
+#define FARADAY_PCI_MEMSIZE_512MB	0x9
+#define FARADAY_PCI_MEMSIZE_1GB		0xa
+#define FARADAY_PCI_MEMSIZE_2GB		0xb
+#define FARADAY_PCI_MEMSIZE_SHIFT	16
+
+/*
+ * The DMA base is set to 0x0 for all memory segments, it reflects the
+ * fact that the memory of the host system starts at 0x0.
+ */
+#define FARADAY_PCI_DMA_MEM1_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM2_BASE	0x00000000
+#define FARADAY_PCI_DMA_MEM3_BASE	0x00000000
+
+/* Defines for PCI configuration command register */
+#define PCI_CONF_ENABLE		BIT(31)
+#define PCI_CONF_WHERE(r)	((r) & 0xFC)
+#define PCI_CONF_BUS(b)		(((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d)	(((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f)	(((f) & 0x07) << 8)
+
+/**
+ * struct faraday_pci_variant - encodes IP block differences
+ * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
+ *	embedded in the host bridge.
+ */
+struct faraday_pci_variant {
+	bool cascaded_irq;
+};
+
+struct faraday_pci {
+	struct device *dev;
+	void __iomem *base;
+	struct irq_domain *irqdomain;
+	struct pci_bus *bus;
+};
+
+static int faraday_res_to_memcfg(resource_size_t mem_base,
+				 resource_size_t mem_size, u32 *val)
+{
+	u32 outval;
+
+	switch (mem_size) {
+	case SZ_1M:
+		outval = FARADAY_PCI_MEMSIZE_1MB;
+		break;
+	case SZ_2M:
+		outval = FARADAY_PCI_MEMSIZE_2MB;
+		break;
+	case SZ_4M:
+		outval = FARADAY_PCI_MEMSIZE_4MB;
+		break;
+	case SZ_8M:
+		outval = FARADAY_PCI_MEMSIZE_8MB;
+		break;
+	case SZ_16M:
+		outval = FARADAY_PCI_MEMSIZE_16MB;
+		break;
+	case SZ_32M:
+		outval = FARADAY_PCI_MEMSIZE_32MB;
+		break;
+	case SZ_64M:
+		outval = FARADAY_PCI_MEMSIZE_64MB;
+		break;
+	case SZ_128M:
+		outval = FARADAY_PCI_MEMSIZE_128MB;
+		break;
+	case SZ_256M:
+		outval = FARADAY_PCI_MEMSIZE_256MB;
+		break;
+	case SZ_512M:
+		outval = FARADAY_PCI_MEMSIZE_512MB;
+		break;
+	case SZ_1G:
+		outval = FARADAY_PCI_MEMSIZE_1GB;
+		break;
+	case SZ_2G:
+		outval = FARADAY_PCI_MEMSIZE_2GB;
+		break;
+	default:
+		return -EINVAL;
+	}
+	outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
+
+	/* This is probably not good */
+	if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
+		pr_warn("truncated PCI memory base\n");
+	/* Translate to bridge side address space */
+	outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
+	pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
+		 &mem_base, &mem_size, outval);
+
+	*val = outval;
+	return 0;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+				   int config, int size, u32 *value)
+{
+	struct faraday_pci *p = bus->sysdata;
+
+	writel(PCI_CONF_BUS(bus->number) |
+			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+			PCI_CONF_WHERE(config) |
+			PCI_CONF_ENABLE,
+			p->base + PCI_CONFIG);
+
+	*value = readl(p->base + PCI_DATA);
+
+	if (size == 1)
+		*value = (*value >> (8 * (config & 3))) & 0xFF;
+	else if (size == 2)
+		*value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+	dev_dbg(&bus->dev,
+		"[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
+				    int config, int size, u32 value)
+{
+	struct faraday_pci *p = bus->sysdata;
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	dev_dbg(&bus->dev,
+		"[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+		PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+	writel(PCI_CONF_BUS(bus->number) |
+			PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+			PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+			PCI_CONF_WHERE(config) |
+			PCI_CONF_ENABLE,
+			p->base + PCI_CONFIG);
+
+	switch (size) {
+	case 4:
+		writel(value, p->base + PCI_DATA);
+		break;
+	case 2:
+		writew(value, p->base + PCI_DATA + (config & 3));
+		break;
+	case 1:
+		writeb(value, p->base + PCI_DATA + (config & 3));
+		break;
+	default:
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return ret;
+}
+
+static struct pci_ops faraday_pci_ops = {
+	.read	= faraday_pci_read_config,
+	.write	= faraday_pci_write_config,
+};
+
+static void faraday_pci_ack_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_mask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+		 | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_unmask_irq(struct irq_data *d)
+{
+	struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+	unsigned int reg;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+	reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_irq_handler(struct irq_desc *desc)
+{
+	struct faraday_pci *p = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	unsigned int irq_stat, reg, i;
+
+	faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+	irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+	chained_irq_enter(irqchip, desc);
+
+	for (i = 0; i < 4; i++) {
+		if ((irq_stat & BIT(i)) == 0)
+			continue;
+		generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+	}
+
+	chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip faraday_pci_irq_chip = {
+	.name = "PCI",
+	.irq_ack = faraday_pci_ack_irq,
+	.irq_mask = faraday_pci_mask_irq,
+	.irq_unmask = faraday_pci_unmask_irq,
+};
+
+static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+			       irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
+	.map = faraday_pci_irq_map,
+};
+
+static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
+{
+	struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+	int irq;
+	int i;
+
+	if (!intc) {
+		dev_err(p->dev, "missing child interrupt-controller node\n");
+		return -EINVAL;
+	}
+
+	/* All PCI IRQs cascade off this one */
+	irq = of_irq_get(intc, 0);
+	if (!irq) {
+		dev_err(p->dev, "failed to get parent IRQ\n");
+		return -EINVAL;
+	}
+
+	p->irqdomain = irq_domain_add_linear(intc, 4,
+					     &faraday_pci_irqdomain_ops, p);
+	if (!p->irqdomain) {
+		dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+		return -EINVAL;
+	}
+
+	irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
+
+	for (i = 0; i < 4; i++)
+		irq_create_mapping(p->irqdomain, i);
+
+	return 0;
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+				     struct device_node *node)
+{
+	const int na = 3, ns = 2;
+	int rlen;
+
+	parser->node = node;
+	parser->pna = of_n_addr_cells(node);
+	parser->np = parser->pna + na + ns;
+
+	parser->range = of_get_property(node, "dma-ranges", &rlen);
+	if (!parser->range)
+		return -ENOENT;
+	parser->end = parser->range + rlen / sizeof(__be32);
+
+	return 0;
+}
+
+static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
+					    struct device_node *np)
+{
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	struct device *dev = p->dev;
+	u32 confreg[3] = {
+		FARADAY_PCI_MEM1_BASE_SIZE,
+		FARADAY_PCI_MEM2_BASE_SIZE,
+		FARADAY_PCI_MEM3_BASE_SIZE,
+	};
+	int i = 0;
+	u32 val;
+
+	if (pci_dma_range_parser_init(&parser, np)) {
+		dev_err(dev, "missing dma-ranges property\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the dma-ranges from the device tree
+	 */
+	for_each_of_pci_range(&parser, &range) {
+		u64 end = range.pci_addr + range.size - 1;
+		int ret;
+
+		ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val);
+		if (ret) {
+			dev_err(dev,
+				"DMA range %d: illegal MEM resource size\n", i);
+			return -EINVAL;
+		}
+
+		dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
+			 i + 1, range.pci_addr, end, val);
+		if (i <= 2) {
+			faraday_pci_write_config(p->bus, 0, confreg[i],
+						 4, val);
+		} else {
+			dev_err(dev, "ignore extraneous dma-range %d\n", i);
+			break;
+		}
+
+		i++;
+	}
+
+	return 0;
+}
+
+static int faraday_pci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct faraday_pci_variant *variant =
+		of_device_get_match_data(dev);
+	struct resource *regs;
+	resource_size_t io_base;
+	struct resource_entry *win;
+	struct faraday_pci *p;
+	struct resource *mem;
+	struct resource *io;
+	struct pci_host_bridge *host;
+	int ret;
+	u32 val;
+	LIST_HEAD(res);
+
+	host = pci_alloc_host_bridge(sizeof(*p));
+	if (!host)
+		return -ENOMEM;
+
+	host->dev.parent = dev;
+	host->ops = &faraday_pci_ops;
+	host->busnr = 0;
+	host->msi = NULL;
+	p = pci_host_bridge_priv(host);
+	host->sysdata = p;
+	p->dev = dev;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	p->base = devm_ioremap_resource(dev, regs);
+	if (IS_ERR(p->base))
+		return PTR_ERR(p->base);
+
+	ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
+					       &res, &io_base);
+	if (ret)
+		return ret;
+
+	ret = devm_request_pci_bus_resources(dev, &res);
+	if (ret)
+		return ret;
+
+	/* Get the I/O and memory ranges from DT */
+	resource_list_for_each_entry(win, &res) {
+		switch (resource_type(win->res)) {
+		case IORESOURCE_IO:
+			io = win->res;
+			io->name = "Gemini PCI I/O";
+			if (!faraday_res_to_memcfg(io->start - win->offset,
+						   resource_size(io), &val)) {
+				/* setup I/O space size */
+				writel(val, p->base + PCI_IOSIZE);
+			} else {
+				dev_err(dev, "illegal IO mem size\n");
+				return -EINVAL;
+			}
+			ret = pci_remap_iospace(io, io_base);
+			if (ret) {
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 ret, io);
+				continue;
+			}
+			break;
+		case IORESOURCE_MEM:
+			mem = win->res;
+			mem->name = "Gemini PCI MEM";
+			break;
+		case IORESOURCE_BUS:
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Setup hostbridge */
+	val = readl(p->base + PCI_CTRL);
+	val |= PCI_COMMAND_IO;
+	val |= PCI_COMMAND_MEMORY;
+	val |= PCI_COMMAND_MASTER;
+	writel(val, p->base + PCI_CTRL);
+
+	list_splice_init(&res, &host->windows);
+	ret = pci_register_host_bridge(host);
+	if (ret) {
+		dev_err(dev, "failed to register host: %d\n", ret);
+		return ret;
+	}
+	p->bus = host->bus;
+
+	/* Mask and clear all interrupts */
+	faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
+	if (variant->cascaded_irq) {
+		ret = faraday_pci_setup_cascaded_irq(p);
+		if (ret) {
+			dev_err(dev, "failed to setup cascaded IRQ\n");
+			return ret;
+		}
+	}
+
+	ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
+	if (ret)
+		return ret;
+
+	pci_scan_child_bus(p->bus);
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_bus_assign_resources(p->bus);
+	pci_bus_add_devices(p->bus);
+	pci_free_resource_list(&res);
+
+	return 0;
+}
+
+/*
+ * We encode bridge variants here, we have at least two so it doesn't
+ * hurt to have infrastructure to encompass future variants as well.
+ */
+const struct faraday_pci_variant faraday_regular = {
+	.cascaded_irq = true,
+};
+
+const struct faraday_pci_variant faraday_dual = {
+	.cascaded_irq = false,
+};
+
+static const struct of_device_id faraday_pci_of_match[] = {
+	{
+		.compatible = "faraday,ftpci100",
+		.data = &faraday_regular,
+	},
+	{
+		.compatible = "faraday,ftpci100-dual",
+		.data = &faraday_dual,
+	},
+	{},
+};
+
+static struct platform_driver faraday_pci_driver = {
+	.driver = {
+		.name = "ftpci100",
+		.of_match_table = of_match_ptr(faraday_pci_of_match),
+	},
+	.probe  = faraday_pci_probe,
+};
+builtin_platform_driver(faraday_pci_driver);
diff --git a/drivers/pci/host/pci-hyperv.c b/drivers/pci/host/pci-hyperv.c
index ada9856..8493638 100644
--- a/drivers/pci/host/pci-hyperv.c
+++ b/drivers/pci/host/pci-hyperv.c
@@ -56,6 +56,7 @@
 #include <asm/apic.h>
 #include <linux/msi.h>
 #include <linux/hyperv.h>
+#include <linux/refcount.h>
 #include <asm/mshyperv.h>
 
 /*
@@ -72,6 +73,7 @@ enum {
 	PCI_PROTOCOL_VERSION_CURRENT = PCI_PROTOCOL_VERSION_1_1
 };
 
+#define CPU_AFFINITY_ALL	-1ULL
 #define PCI_CONFIG_MMIO_LENGTH	0x2000
 #define CFG_PAGE_OFFSET 0x1000
 #define CFG_PAGE_SIZE (PCI_CONFIG_MMIO_LENGTH - CFG_PAGE_OFFSET)
@@ -350,6 +352,7 @@ enum hv_pcibus_state {
 	hv_pcibus_init = 0,
 	hv_pcibus_probed,
 	hv_pcibus_installed,
+	hv_pcibus_removed,
 	hv_pcibus_maximum
 };
 
@@ -421,7 +424,7 @@ enum hv_pcidev_ref_reason {
 struct hv_pci_dev {
 	/* List protected by pci_rescan_remove_lock */
 	struct list_head list_entry;
-	atomic_t refs;
+	refcount_t refs;
 	enum hv_pcichild_state state;
 	struct pci_function_description desc;
 	bool reported_missing;
@@ -876,7 +879,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		hv_int_desc_free(hpdev, int_desc);
 	}
 
-	int_desc = kzalloc(sizeof(*int_desc), GFP_KERNEL);
+	int_desc = kzalloc(sizeof(*int_desc), GFP_ATOMIC);
 	if (!int_desc)
 		goto drop_reference;
 
@@ -897,9 +900,13 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	 * processors because Hyper-V only supports 64 in a guest.
 	 */
 	affinity = irq_data_get_affinity_mask(data);
-	for_each_cpu_and(cpu, affinity, cpu_online_mask) {
-		int_pkt->int_desc.cpu_mask |=
-			(1ULL << vmbus_cpu_number_to_vp_number(cpu));
+	if (cpumask_weight(affinity) >= 32) {
+		int_pkt->int_desc.cpu_mask = CPU_AFFINITY_ALL;
+	} else {
+		for_each_cpu_and(cpu, affinity, cpu_online_mask) {
+			int_pkt->int_desc.cpu_mask |=
+				(1ULL << vmbus_cpu_number_to_vp_number(cpu));
+		}
 	}
 
 	ret = vmbus_sendpacket(hpdev->hbus->hdev->channel, int_pkt,
@@ -1208,9 +1215,11 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
 	hbus->pci_bus->msi = &hbus->msi_chip;
 	hbus->pci_bus->msi->dev = &hbus->hdev->device;
 
+	pci_lock_rescan_remove();
 	pci_scan_child_bus(hbus->pci_bus);
 	pci_bus_assign_resources(hbus->pci_bus);
 	pci_bus_add_devices(hbus->pci_bus);
+	pci_unlock_rescan_remove();
 	hbus->state = hv_pcibus_installed;
 	return 0;
 }
@@ -1254,13 +1263,13 @@ static void q_resource_requirements(void *context, struct pci_response *resp,
 static void get_pcichild(struct hv_pci_dev *hpdev,
 			    enum hv_pcidev_ref_reason reason)
 {
-	atomic_inc(&hpdev->refs);
+	refcount_inc(&hpdev->refs);
 }
 
 static void put_pcichild(struct hv_pci_dev *hpdev,
 			    enum hv_pcidev_ref_reason reason)
 {
-	if (atomic_dec_and_test(&hpdev->refs))
+	if (refcount_dec_and_test(&hpdev->refs))
 		kfree(hpdev);
 }
 
@@ -1314,7 +1323,7 @@ static struct hv_pci_dev *new_pcichild_device(struct hv_pcibus_device *hbus,
 	wait_for_completion(&comp_pkt.host_event);
 
 	hpdev->desc = *desc;
-	get_pcichild(hpdev, hv_pcidev_ref_initial);
+	refcount_set(&hpdev->refs, 1);
 	get_pcichild(hpdev, hv_pcidev_ref_childlist);
 	spin_lock_irqsave(&hbus->device_list_lock, flags);
 
@@ -1504,13 +1513,24 @@ static void pci_devices_present_work(struct work_struct *work)
 		put_pcichild(hpdev, hv_pcidev_ref_initial);
 	}
 
-	/* Tell the core to rescan bus because there may have been changes. */
-	if (hbus->state == hv_pcibus_installed) {
+	switch(hbus->state) {
+	case hv_pcibus_installed:
+		/*
+		* Tell the core to rescan bus
+		* because there may have been changes.
+		*/
 		pci_lock_rescan_remove();
 		pci_scan_child_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
-	} else {
+		break;
+
+	case hv_pcibus_init:
+	case hv_pcibus_probed:
 		survey_child_resources(hbus);
+		break;
+
+	default:
+		break;
 	}
 
 	up(&hbus->enum_sem);
@@ -1600,8 +1620,10 @@ static void hv_eject_device_work(struct work_struct *work)
 	pdev = pci_get_domain_bus_and_slot(hpdev->hbus->sysdata.domain, 0,
 					   wslot);
 	if (pdev) {
+		pci_lock_rescan_remove();
 		pci_stop_and_remove_bus_device(pdev);
 		pci_dev_put(pdev);
+		pci_unlock_rescan_remove();
 	}
 
 	spin_lock_irqsave(&hpdev->hbus->device_list_lock, flags);
@@ -2185,6 +2207,7 @@ static int hv_pci_probe(struct hv_device *hdev,
 	hbus = kzalloc(sizeof(*hbus), GFP_KERNEL);
 	if (!hbus)
 		return -ENOMEM;
+	hbus->state = hv_pcibus_init;
 
 	/*
 	 * The PCI bus "domain" is what is called "segment" in ACPI and
@@ -2348,6 +2371,7 @@ static int hv_pci_remove(struct hv_device *hdev)
 		pci_stop_root_bus(hbus->pci_bus);
 		pci_remove_root_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
+		hbus->state = hv_pcibus_removed;
 	}
 
 	hv_pci_bus_exit(hdev);
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 52b5bdc..6e031b5 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -14,6 +14,7 @@
  * Copyright (C) 2015 - 2016 Cavium, Inc.
  */
 
+#include <linux/bitfield.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of_address.h>
@@ -334,6 +335,49 @@ static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg,
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 
+#define PEM_RES_BASE		0x87e0c0000000UL
+#define PEM_NODE_MASK		GENMASK(45, 44)
+#define PEM_INDX_MASK		GENMASK(26, 24)
+#define PEM_MIN_DOM_IN_NODE	4
+#define PEM_MAX_DOM_IN_NODE	10
+
+static void thunder_pem_reserve_range(struct device *dev, int seg,
+				      struct resource *r)
+{
+	resource_size_t start = r->start, end = r->end;
+	struct resource *res;
+	const char *regionid;
+
+	regionid = kasprintf(GFP_KERNEL, "PEM RC:%d", seg);
+	if (!regionid)
+		return;
+
+	res = request_mem_region(start, end - start + 1, regionid);
+	if (res)
+		res->flags &= ~IORESOURCE_BUSY;
+	else
+		kfree(regionid);
+
+	dev_info(dev, "%pR %s reserved\n", r,
+		 res ? "has been" : "could not be");
+}
+
+static void thunder_pem_legacy_fw(struct acpi_pci_root *root,
+				 struct resource *res_pem)
+{
+	int node = acpi_get_node(root->device->handle);
+	int index;
+
+	if (node == NUMA_NO_NODE)
+		node = 0;
+
+	index = root->segment - PEM_MIN_DOM_IN_NODE;
+	index -= node * PEM_MAX_DOM_IN_NODE;
+	res_pem->start = PEM_RES_BASE | FIELD_PREP(PEM_NODE_MASK, node) |
+					FIELD_PREP(PEM_INDX_MASK, index);
+	res_pem->flags = IORESOURCE_MEM;
+}
+
 static int thunder_pem_acpi_init(struct pci_config_window *cfg)
 {
 	struct device *dev = cfg->parent;
@@ -346,10 +390,24 @@ static int thunder_pem_acpi_init(struct pci_config_window *cfg)
 	if (!res_pem)
 		return -ENOMEM;
 
-	ret = acpi_get_rc_resources(dev, "THRX0002", root->segment, res_pem);
+	ret = acpi_get_rc_resources(dev, "CAVA02B", root->segment, res_pem);
+
+	/*
+	 * If we fail to gather resources it means that we run with old
+	 * FW where we need to calculate PEM-specific resources manually.
+	 */
 	if (ret) {
-		dev_err(dev, "can't get rc base address\n");
-		return ret;
+		thunder_pem_legacy_fw(root, res_pem);
+		/*
+		 * Reserve 64K size PEM specific resources. The full 16M range
+		 * size is required for thunder_pem_init() call.
+		 */
+		res_pem->end = res_pem->start + SZ_64K - 1;
+		thunder_pem_reserve_range(dev, root->segment, res_pem);
+		res_pem->end = res_pem->start + SZ_16M - 1;
+
+		/* Reserve PCI configuration space as well. */
+		thunder_pem_reserve_range(dev, root->segment, &cfg->res);
 	}
 
 	return thunder_pem_init(dev, cfg, res_pem);
diff --git a/drivers/pci/host/pcie-iproc-bcma.c b/drivers/pci/host/pcie-iproc-bcma.c
index bd4c9ec..384c27e 100644
--- a/drivers/pci/host/pcie-iproc-bcma.c
+++ b/drivers/pci/host/pcie-iproc-bcma.c
@@ -44,8 +44,7 @@ static int iproc_pcie_bcma_probe(struct bcma_device *bdev)
 {
 	struct device *dev = &bdev->dev;
 	struct iproc_pcie *pcie;
-	LIST_HEAD(res);
-	struct resource res_mem;
+	LIST_HEAD(resources);
 	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -63,22 +62,23 @@ static int iproc_pcie_bcma_probe(struct bcma_device *bdev)
 
 	pcie->base_addr = bdev->addr;
 
-	res_mem.start = bdev->addr_s[0];
-	res_mem.end = bdev->addr_s[0] + SZ_128M - 1;
-	res_mem.name = "PCIe MEM space";
-	res_mem.flags = IORESOURCE_MEM;
-	pci_add_resource(&res, &res_mem);
+	pcie->mem.start = bdev->addr_s[0];
+	pcie->mem.end = bdev->addr_s[0] + SZ_128M - 1;
+	pcie->mem.name = "PCIe MEM space";
+	pcie->mem.flags = IORESOURCE_MEM;
+	pci_add_resource(&resources, &pcie->mem);
 
 	pcie->map_irq = iproc_pcie_bcma_map_irq;
 
-	ret = iproc_pcie_setup(pcie, &res);
-	if (ret)
+	ret = iproc_pcie_setup(pcie, &resources);
+	if (ret) {
 		dev_err(dev, "PCIe controller setup failed\n");
-
-	pci_free_resource_list(&res);
+		pci_free_resource_list(&resources);
+		return ret;
+	}
 
 	bcma_set_drvdata(bdev, pcie);
-	return ret;
+	return 0;
 }
 
 static void iproc_pcie_bcma_remove(struct bcma_device *bdev)
diff --git a/drivers/pci/host/pcie-iproc-platform.c b/drivers/pci/host/pcie-iproc-platform.c
index f4909bb..8c6a327 100644
--- a/drivers/pci/host/pcie-iproc-platform.c
+++ b/drivers/pci/host/pcie-iproc-platform.c
@@ -51,7 +51,7 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct resource reg;
 	resource_size_t iobase = 0;
-	LIST_HEAD(res);
+	LIST_HEAD(resources);
 	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
@@ -96,10 +96,10 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 		pcie->phy = NULL;
 	}
 
-	ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &iobase);
+	ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &resources,
+					       &iobase);
 	if (ret) {
-		dev_err(dev,
-			"unable to get PCI host bridge resources\n");
+		dev_err(dev, "unable to get PCI host bridge resources\n");
 		return ret;
 	}
 
@@ -112,14 +112,15 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 		pcie->map_irq = of_irq_parse_and_map_pci;
 	}
 
-	ret = iproc_pcie_setup(pcie, &res);
-	if (ret)
+	ret = iproc_pcie_setup(pcie, &resources);
+	if (ret) {
 		dev_err(dev, "PCIe controller setup failed\n");
-
-	pci_free_resource_list(&res);
+		pci_free_resource_list(&resources);
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, pcie);
-	return ret;
+	return 0;
 }
 
 static int iproc_pcie_pltfm_remove(struct platform_device *pdev)
diff --git a/drivers/pci/host/pcie-iproc.h b/drivers/pci/host/pcie-iproc.h
index 04fed8e..0bbe2ea 100644
--- a/drivers/pci/host/pcie-iproc.h
+++ b/drivers/pci/host/pcie-iproc.h
@@ -90,6 +90,7 @@ struct iproc_pcie {
 #ifdef CONFIG_ARM
 	struct pci_sys_data sysdata;
 #endif
+	struct resource mem;
 	struct pci_bus *root_bus;
 	struct phy *phy;
 	int (*map_irq)(const struct pci_dev *, u8, u8);
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 973472c..1dfa10c 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -478,7 +478,7 @@ static void aspm_calc_l1ss_info(struct pcie_link_state *link,
 
 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 {
-	struct pci_dev *child, *parent = link->pdev;
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
 	struct pci_bus *linkbus = parent->subordinate;
 	struct aspm_register_info upreg, dwreg;
 
@@ -491,9 +491,7 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 
 	/* Get upstream/downstream components' register state */
 	pcie_get_aspm_reg(parent, &upreg);
-	child = pci_function_0(linkbus);
 	pcie_get_aspm_reg(child, &dwreg);
-	link->downstream = child;
 
 	/*
 	 * If ASPM not supported, don't mess with the clocks and link,
@@ -800,6 +798,7 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
 	INIT_LIST_HEAD(&link->children);
 	INIT_LIST_HEAD(&link->link);
 	link->pdev = pdev;
+	link->downstream = pci_function_0(pdev->subordinate);
 
 	/*
 	 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f754453..6736836 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2174,6 +2174,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
 		quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd);
 
 /*
  * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 8850fca..566fda5 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -428,6 +428,16 @@ struct i2c_device_id {
 	kernel_ulong_t driver_data;	/* Data private to the driver */
 };
 
+/* pci_epf */
+
+#define PCI_EPF_NAME_SIZE	20
+#define PCI_EPF_MODULE_PREFIX	"pci_epf:"
+
+struct pci_epf_device_id {
+	char name[PCI_EPF_NAME_SIZE];
+	kernel_ulong_t driver_data;
+};
+
 /* spi */
 
 #define SPI_NAME_SIZE	32
diff --git a/include/linux/pci-ep-cfs.h b/include/linux/pci-ep-cfs.h
new file mode 100644
index 0000000..263b89e
--- /dev/null
+++ b/include/linux/pci-ep-cfs.h
@@ -0,0 +1,41 @@
+/**
+ * PCI Endpoint ConfigFS header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EP_CFS_H
+#define __LINUX_PCI_EP_CFS_H
+
+#include <linux/configfs.h>
+
+#ifdef CONFIG_PCI_ENDPOINT_CONFIGFS
+struct config_group *pci_ep_cfs_add_epc_group(const char *name);
+void pci_ep_cfs_remove_epc_group(struct config_group *group);
+struct config_group *pci_ep_cfs_add_epf_group(const char *name);
+void pci_ep_cfs_remove_epf_group(struct config_group *group);
+#else
+static inline struct config_group *pci_ep_cfs_add_epc_group(const char *name)
+{
+	return 0;
+}
+
+static inline void pci_ep_cfs_remove_epc_group(struct config_group *group)
+{
+}
+
+static inline struct config_group *pci_ep_cfs_add_epf_group(const char *name)
+{
+	return 0;
+}
+
+static inline void pci_ep_cfs_remove_epf_group(struct config_group *group)
+{
+}
+#endif
+#endif /* __LINUX_PCI_EP_CFS_H */
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
new file mode 100644
index 0000000..af5edbf
--- /dev/null
+++ b/include/linux/pci-epc.h
@@ -0,0 +1,144 @@
+/**
+ * PCI Endpoint *Controller* (EPC) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPC_H
+#define __LINUX_PCI_EPC_H
+
+#include <linux/pci-epf.h>
+
+struct pci_epc;
+
+enum pci_epc_irq_type {
+	PCI_EPC_IRQ_UNKNOWN,
+	PCI_EPC_IRQ_LEGACY,
+	PCI_EPC_IRQ_MSI,
+};
+
+/**
+ * struct pci_epc_ops - set of function pointers for performing EPC operations
+ * @write_header: ops to populate configuration space header
+ * @set_bar: ops to configure the BAR
+ * @clear_bar: ops to reset the BAR
+ * @map_addr: ops to map CPU address to PCI address
+ * @unmap_addr: ops to unmap CPU address and PCI address
+ * @set_msi: ops to set the requested number of MSI interrupts in the MSI
+ *	     capability register
+ * @get_msi: ops to get the number of MSI interrupts allocated by the RC from
+ *	     the MSI capability register
+ * @raise_irq: ops to raise a legacy or MSI interrupt
+ * @start: ops to start the PCI link
+ * @stop: ops to stop the PCI link
+ * @owner: the module owner containing the ops
+ */
+struct pci_epc_ops {
+	int	(*write_header)(struct pci_epc *pci_epc,
+				struct pci_epf_header *hdr);
+	int	(*set_bar)(struct pci_epc *epc, enum pci_barno bar,
+			   dma_addr_t bar_phys, size_t size, int flags);
+	void	(*clear_bar)(struct pci_epc *epc, enum pci_barno bar);
+	int	(*map_addr)(struct pci_epc *epc, phys_addr_t addr,
+			    u64 pci_addr, size_t size);
+	void	(*unmap_addr)(struct pci_epc *epc, phys_addr_t addr);
+	int	(*set_msi)(struct pci_epc *epc, u8 interrupts);
+	int	(*get_msi)(struct pci_epc *epc);
+	int	(*raise_irq)(struct pci_epc *pci_epc,
+			     enum pci_epc_irq_type type, u8 interrupt_num);
+	int	(*start)(struct pci_epc *epc);
+	void	(*stop)(struct pci_epc *epc);
+	struct module *owner;
+};
+
+/**
+ * struct pci_epc_mem - address space of the endpoint controller
+ * @phys_base: physical base address of the PCI address space
+ * @size: the size of the PCI address space
+ * @bitmap: bitmap to manage the PCI address space
+ * @pages: number of bits representing the address region
+ */
+struct pci_epc_mem {
+	phys_addr_t	phys_base;
+	size_t		size;
+	unsigned long	*bitmap;
+	int		pages;
+};
+
+/**
+ * struct pci_epc - represents the PCI EPC device
+ * @dev: PCI EPC device
+ * @pci_epf: list of endpoint functions present in this EPC device
+ * @ops: function pointers for performing endpoint operations
+ * @mem: address space of the endpoint controller
+ * @max_functions: max number of functions that can be configured in this EPC
+ * @group: configfs group representing the PCI EPC device
+ * @lock: spinlock to protect pci_epc ops
+ */
+struct pci_epc {
+	struct device			dev;
+	struct list_head		pci_epf;
+	const struct pci_epc_ops	*ops;
+	struct pci_epc_mem		*mem;
+	u8				max_functions;
+	struct config_group		*group;
+	/* spinlock to protect against concurrent access of EP controller */
+	spinlock_t			lock;
+};
+
+#define to_pci_epc(device) container_of((device), struct pci_epc, dev)
+
+#define pci_epc_create(dev, ops)    \
+		__pci_epc_create((dev), (ops), THIS_MODULE)
+#define devm_pci_epc_create(dev, ops)    \
+		__devm_pci_epc_create((dev), (ops), THIS_MODULE)
+
+static inline void epc_set_drvdata(struct pci_epc *epc, void *data)
+{
+	dev_set_drvdata(&epc->dev, data);
+}
+
+static inline void *epc_get_drvdata(struct pci_epc *epc)
+{
+	return dev_get_drvdata(&epc->dev);
+}
+
+struct pci_epc *
+__devm_pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		      struct module *owner);
+struct pci_epc *
+__pci_epc_create(struct device *dev, const struct pci_epc_ops *ops,
+		 struct module *owner);
+void devm_pci_epc_destroy(struct device *dev, struct pci_epc *epc);
+void pci_epc_destroy(struct pci_epc *epc);
+int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf);
+void pci_epc_linkup(struct pci_epc *epc);
+void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf);
+int pci_epc_write_header(struct pci_epc *epc, struct pci_epf_header *hdr);
+int pci_epc_set_bar(struct pci_epc *epc, enum pci_barno bar,
+		    dma_addr_t bar_phys, size_t size, int flags);
+void pci_epc_clear_bar(struct pci_epc *epc, int bar);
+int pci_epc_map_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+		     u64 pci_addr, size_t size);
+void pci_epc_unmap_addr(struct pci_epc *epc, phys_addr_t phys_addr);
+int pci_epc_set_msi(struct pci_epc *epc, u8 interrupts);
+int pci_epc_get_msi(struct pci_epc *epc);
+int pci_epc_raise_irq(struct pci_epc *epc, enum pci_epc_irq_type type,
+		      u8 interrupt_num);
+int pci_epc_start(struct pci_epc *epc);
+void pci_epc_stop(struct pci_epc *epc);
+struct pci_epc *pci_epc_get(const char *epc_name);
+void pci_epc_put(struct pci_epc *epc);
+
+int pci_epc_mem_init(struct pci_epc *epc, phys_addr_t phys_addr, size_t size);
+void pci_epc_mem_exit(struct pci_epc *epc);
+void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
+				     phys_addr_t *phys_addr, size_t size);
+void pci_epc_mem_free_addr(struct pci_epc *epc, phys_addr_t phys_addr,
+			   void __iomem *virt_addr, size_t size);
+#endif /* __LINUX_PCI_EPC_H */
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
new file mode 100644
index 0000000..0d529cb
--- /dev/null
+++ b/include/linux/pci-epf.h
@@ -0,0 +1,162 @@
+/**
+ * PCI Endpoint *Function* (EPF) header file
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_PCI_EPF_H
+#define __LINUX_PCI_EPF_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+
+struct pci_epf;
+
+enum pci_interrupt_pin {
+	PCI_INTERRUPT_UNKNOWN,
+	PCI_INTERRUPT_INTA,
+	PCI_INTERRUPT_INTB,
+	PCI_INTERRUPT_INTC,
+	PCI_INTERRUPT_INTD,
+};
+
+enum pci_barno {
+	BAR_0,
+	BAR_1,
+	BAR_2,
+	BAR_3,
+	BAR_4,
+	BAR_5,
+};
+
+/**
+ * struct pci_epf_header - represents standard configuration header
+ * @vendorid: identifies device manufacturer
+ * @deviceid: identifies a particular device
+ * @revid: specifies a device-specific revision identifier
+ * @progif_code: identifies a specific register-level programming interface
+ * @subclass_code: identifies more specifically the function of the device
+ * @baseclass_code: broadly classifies the type of function the device performs
+ * @cache_line_size: specifies the system cacheline size in units of DWORDs
+ * @subsys_vendor_id: vendor of the add-in card or subsystem
+ * @subsys_id: id specific to vendor
+ * @interrupt_pin: interrupt pin the device (or device function) uses
+ */
+struct pci_epf_header {
+	u16	vendorid;
+	u16	deviceid;
+	u8	revid;
+	u8	progif_code;
+	u8	subclass_code;
+	u8	baseclass_code;
+	u8	cache_line_size;
+	u16	subsys_vendor_id;
+	u16	subsys_id;
+	enum pci_interrupt_pin interrupt_pin;
+};
+
+/**
+ * struct pci_epf_ops - set of function pointers for performing EPF operations
+ * @bind: ops to perform when a EPC device has been bound to EPF device
+ * @unbind: ops to perform when a binding has been lost between a EPC device
+ *	    and EPF device
+ * @linkup: ops to perform when the EPC device has established a connection with
+ *	    a host system
+ */
+struct pci_epf_ops {
+	int	(*bind)(struct pci_epf *epf);
+	void	(*unbind)(struct pci_epf *epf);
+	void	(*linkup)(struct pci_epf *epf);
+};
+
+/**
+ * struct pci_epf_driver - represents the PCI EPF driver
+ * @probe: ops to perform when a new EPF device has been bound to the EPF driver
+ * @remove: ops to perform when the binding between the EPF device and EPF
+ *	    driver is broken
+ * @driver: PCI EPF driver
+ * @ops: set of function pointers for performing EPF operations
+ * @owner: the owner of the module that registers the PCI EPF driver
+ * @group: configfs group corresponding to the PCI EPF driver
+ * @id_table: identifies EPF devices for probing
+ */
+struct pci_epf_driver {
+	int	(*probe)(struct pci_epf *epf);
+	int	(*remove)(struct pci_epf *epf);
+
+	struct device_driver	driver;
+	struct pci_epf_ops	*ops;
+	struct module		*owner;
+	struct config_group	*group;
+	const struct pci_epf_device_id	*id_table;
+};
+
+#define to_pci_epf_driver(drv) (container_of((drv), struct pci_epf_driver, \
+				driver))
+
+/**
+ * struct pci_epf_bar - represents the BAR of EPF device
+ * @phys_addr: physical address that should be mapped to the BAR
+ * @size: the size of the address space present in BAR
+ */
+struct pci_epf_bar {
+	dma_addr_t	phys_addr;
+	size_t		size;
+};
+
+/**
+ * struct pci_epf - represents the PCI EPF device
+ * @dev: the PCI EPF device
+ * @name: the name of the PCI EPF device
+ * @header: represents standard configuration header
+ * @bar: represents the BAR of EPF device
+ * @msi_interrupts: number of MSI interrupts required by this function
+ * @func_no: unique function number within this endpoint device
+ * @epc: the EPC device to which this EPF device is bound
+ * @driver: the EPF driver to which this EPF device is bound
+ * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
+ */
+struct pci_epf {
+	struct device		dev;
+	const char		*name;
+	struct pci_epf_header	*header;
+	struct pci_epf_bar	bar[6];
+	u8			msi_interrupts;
+	u8			func_no;
+
+	struct pci_epc		*epc;
+	struct pci_epf_driver	*driver;
+	struct list_head	list;
+};
+
+#define to_pci_epf(epf_dev) container_of((epf_dev), struct pci_epf, dev)
+
+#define pci_epf_register_driver(driver)    \
+		__pci_epf_register_driver((driver), THIS_MODULE)
+
+static inline void epf_set_drvdata(struct pci_epf *epf, void *data)
+{
+	dev_set_drvdata(&epf->dev, data);
+}
+
+static inline void *epf_get_drvdata(struct pci_epf *epf)
+{
+	return dev_get_drvdata(&epf->dev);
+}
+
+struct pci_epf *pci_epf_create(const char *name);
+void pci_epf_destroy(struct pci_epf *epf);
+int __pci_epf_register_driver(struct pci_epf_driver *driver,
+			      struct module *owner);
+void pci_epf_unregister_driver(struct pci_epf_driver *driver);
+void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar);
+void pci_epf_free_space(struct pci_epf *epf, void *addr, enum pci_barno bar);
+int pci_epf_bind(struct pci_epf *epf);
+void pci_epf_unbind(struct pci_epf *epf);
+void pci_epf_linkup(struct pci_epf *epf);
+#endif /* __LINUX_PCI_EPF_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a4f77fe..5f6b71d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -862,6 +862,8 @@
 #define PCI_DEVICE_ID_TI_X620		0xac8d
 #define PCI_DEVICE_ID_TI_X420		0xac8e
 #define PCI_DEVICE_ID_TI_XX20_FM	0xac8f
+#define PCI_DEVICE_ID_TI_DRA74x		0xb500
+#define PCI_DEVICE_ID_TI_DRA72x		0xb501
 
 #define PCI_VENDOR_ID_SONY		0x104d
 
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index dd9820b..baee6db 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -333,6 +333,7 @@
 header-y += patchkey.h
 header-y += pci.h
 header-y += pci_regs.h
+header-y += pcitest.h
 header-y += perf_event.h
 header-y += personality.h
 header-y += pfkeyv2.h
diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
new file mode 100644
index 0000000..a6aa10c4
--- /dev/null
+++ b/include/uapi/linux/pcitest.h
@@ -0,0 +1,19 @@
+/**
+ * pcitest.h - PCI test uapi defines
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ */
+
+#ifndef __UAPI_LINUX_PCITEST_H
+#define __UAPI_LINUX_PCITEST_H
+
+#define PCITEST_BAR		_IO('P', 0x1)
+#define PCITEST_LEGACY_IRQ	_IO('P', 0x2)
+#define PCITEST_MSI		_IOW('P', 0x3, int)
+#define PCITEST_WRITE		_IOW('P', 0x4, unsigned long)
+#define PCITEST_READ		_IOW('P', 0x5, unsigned long)
+#define PCITEST_COPY		_IOW('P', 0x6, unsigned long)
+
+#endif /* __UAPI_LINUX_PCITEST_H */
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
new file mode 100644
index 0000000..ad54a58
--- /dev/null
+++ b/tools/pci/pcitest.c
@@ -0,0 +1,186 @@
+/**
+ * Userspace PCI Endpoint Test Module
+ *
+ * Copyright (C) 2017 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <time.h>
+#include <unistd.h>
+
+#include <linux/pcitest.h>
+
+#define BILLION 1E9
+
+static char *result[] = { "NOT OKAY", "OKAY" };
+
+struct pci_test {
+	char		*device;
+	char		barnum;
+	bool		legacyirq;
+	unsigned int	msinum;
+	bool		read;
+	bool		write;
+	bool		copy;
+	unsigned long	size;
+};
+
+static int run_test(struct pci_test *test)
+{
+	long ret;
+	int fd;
+	struct timespec start, end;
+	double time;
+
+	fd = open(test->device, O_RDWR);
+	if (fd < 0) {
+		perror("can't open PCI Endpoint Test device");
+		return fd;
+	}
+
+	if (test->barnum >= 0 && test->barnum <= 5) {
+		ret = ioctl(fd, PCITEST_BAR, test->barnum);
+		fprintf(stdout, "BAR%d:\t\t", test->barnum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->legacyirq) {
+		ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0);
+		fprintf(stdout, "LEGACY IRQ:\t");
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->msinum > 0 && test->msinum <= 32) {
+		ret = ioctl(fd, PCITEST_MSI, test->msinum);
+		fprintf(stdout, "MSI%d:\t\t", test->msinum);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->write) {
+		ret = ioctl(fd, PCITEST_WRITE, test->size);
+		fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->read) {
+		ret = ioctl(fd, PCITEST_READ, test->size);
+		fprintf(stdout, "READ (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	if (test->copy) {
+		ret = ioctl(fd, PCITEST_COPY, test->size);
+		fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size);
+		if (ret < 0)
+			fprintf(stdout, "TEST FAILED\n");
+		else
+			fprintf(stdout, "%s\n", result[ret]);
+	}
+
+	fflush(stdout);
+}
+
+int main(int argc, char **argv)
+{
+	int c;
+	struct pci_test *test;
+
+	test = calloc(1, sizeof(*test));
+	if (!test) {
+		perror("Fail to allocate memory for pci_test\n");
+		return -ENOMEM;
+	}
+
+	/* since '0' is a valid BAR number, initialize it to -1 */
+	test->barnum = -1;
+
+	/* set default size as 100KB */
+	test->size = 0x19000;
+
+	/* set default endpoint device */
+	test->device = "/dev/pci-endpoint-test.0";
+
+	while ((c = getopt(argc, argv, "D:b:m:lrwcs:")) != EOF)
+	switch (c) {
+	case 'D':
+		test->device = optarg;
+		continue;
+	case 'b':
+		test->barnum = atoi(optarg);
+		if (test->barnum < 0 || test->barnum > 5)
+			goto usage;
+		continue;
+	case 'l':
+		test->legacyirq = true;
+		continue;
+	case 'm':
+		test->msinum = atoi(optarg);
+		if (test->msinum < 1 || test->msinum > 32)
+			goto usage;
+		continue;
+	case 'r':
+		test->read = true;
+		continue;
+	case 'w':
+		test->write = true;
+		continue;
+	case 'c':
+		test->copy = true;
+		continue;
+	case 's':
+		test->size = strtoul(optarg, NULL, 0);
+		continue;
+	case '?':
+	case 'h':
+	default:
+usage:
+		fprintf(stderr,
+			"usage: %s [options]\n"
+			"Options:\n"
+			"\t-D <dev>		PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n"
+			"\t-b <bar num>		BAR test (bar number between 0..5)\n"
+			"\t-m <msi num>		MSI test (msi number between 1..32)\n"
+			"\t-r			Read buffer test\n"
+			"\t-w			Write buffer test\n"
+			"\t-c			Copy buffer test\n"
+			"\t-s <size>		Size of buffer {default: 100KB}\n",
+			argv[0]);
+		return -EINVAL;
+	}
+
+	run_test(test);
+	return 0;
+}
diff --git a/tools/pci/pcitest.sh b/tools/pci/pcitest.sh
new file mode 100644
index 0000000..5442bbe
--- /dev/null
+++ b/tools/pci/pcitest.sh
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+echo "BAR tests"
+echo
+
+bar=0
+
+while [ $bar -lt 6 ]
+do
+	pcitest -b $bar
+	bar=`expr $bar + 1`
+done
+echo
+
+echo "Interrupt tests"
+echo
+
+pcitest -l
+msi=1
+
+while [ $msi -lt 33 ]
+do
+        pcitest -m $msi
+        msi=`expr $msi + 1`
+done
+echo
+
+echo "Read Tests"
+echo
+
+pcitest -r -s 1
+pcitest -r -s 1024
+pcitest -r -s 1025
+pcitest -r -s 1024000
+pcitest -r -s 1024001
+echo
+
+echo "Write Tests"
+echo
+
+pcitest -w -s 1
+pcitest -w -s 1024
+pcitest -w -s 1025
+pcitest -w -s 1024000
+pcitest -w -s 1024001
+echo
+
+echo "Copy Tests"
+echo
+
+pcitest -c -s 1
+pcitest -c -s 1024
+pcitest -c -s 1025
+pcitest -c -s 1024000
+pcitest -c -s 1024001
+echo