ARM: OMAP: Add minimal OMAP2430 support
This patch adds minimal OMAP2430 support to get the kernel booting on 2430SDP.
Signed-off-by: Syed Mohammed Khasim <x0khasim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index cf4268e..7069c9d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,6 +11,10 @@
select OMAP_DM_TIMER
select ARCH_OMAP_OTG
+config ARCH_OMAP2430
+ bool "OMAP2430 support"
+ depends on ARCH_OMAP24XX
+
comment "OMAP Board Type"
depends on ARCH_OMAP2
@@ -26,3 +30,8 @@
config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
+config MACH_OMAP_2430SDP
+ bool "OMAP 2430 SDP board"
+ depends on ARCH_OMAP2 && ARCH_OMAP24XX
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 266d88e..b05b738 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -14,5 +14,6 @@
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
+obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
new file mode 100644
index 0000000..7e76fbf
--- /dev/null
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-omap2/board-2430sdp.c
+ *
+ * Copyright (C) 2006 Texas Instruments
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * Initial Code : Based on a patch from Komal Shah and Richard Woodruff
+ * Updated the Code for 2430 SDP : Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/gpmc.h>
+#include "prcm-regs.h"
+
+#include <asm/io.h>
+
+
+#define SDP2430_FLASH_CS 0
+#define SDP2430_SMC91X_CS 5
+
+static struct mtd_partition sdp2430_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct flash_platform_data sdp2430_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = sdp2430_partitions,
+ .nr_parts = ARRAY_SIZE(sdp2430_partitions),
+};
+
+static struct resource sdp2430_flash_resource = {
+ .start = SDP2430_CS0_BASE,
+ .end = SDP2430_CS0_BASE + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sdp2430_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdp2430_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &sdp2430_flash_resource,
+};
+
+static struct resource sdp2430_smc91x_resources[] = {
+ [0] = {
+ .start = SDP2430_CS0_BASE,
+ .end = SDP2430_CS0_BASE + SZ_64M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdp2430_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
+ .resource = sdp2430_smc91x_resources,
+};
+
+static struct platform_device *sdp2430_devices[] __initdata = {
+ &sdp2430_smc91x_device,
+ &sdp2430_flash_device,
+};
+
+static inline void __init sdp2430_init_smc91x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ unsigned int rate;
+ struct clk *l3ck;
+
+ eth_cs = SDP2430_SMC91X_CS;
+
+ l3ck = clk_get(NULL, "core_l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ /* Make sure CS1 timings are correct, for 2430 always muxed */
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
+
+ if (rate >= 160000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else if (rate >= 130000000) {
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+ } else { /* rate = 100000000 */
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+ gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+ }
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
+ sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ udelay(100);
+
+ if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
+ OMAP24XX_ETHR_GPIO_IRQ);
+ gpmc_cs_free(eth_cs);
+ return;
+ }
+ omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+
+}
+
+static void __init omap_2430sdp_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+ sdp2430_init_smc91x();
+}
+
+static struct omap_uart_config sdp2430_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel sdp2430_config[] = {
+ {OMAP_TAG_UART, &sdp2430_uart_config},
+};
+
+static void __init omap_2430sdp_init(void)
+{
+ platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
+ omap_board_config = sdp2430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp2430_config);
+ omap_serial_init();
+}
+
+static void __init omap_2430sdp_map_io(void)
+{
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
+ /* Maintainer: Syed Khasim - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_2430sdp_map_io,
+ .init_irq = omap_2430sdp_init_irq,
+ .init_machine = omap_2430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 52ec2f2..b603bc5 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -55,8 +55,10 @@
if (machine_is_omap_h4())
return;
- omap_cfg_reg(J15_24XX_I2C2_SCL);
- omap_cfg_reg(H19_24XX_I2C2_SDA);
+ if (!cpu_is_omap2430()) {
+ omap_cfg_reg(J15_24XX_I2C2_SCL);
+ omap_cfg_reg(H19_24XX_I2C2_SDA);
+ }
(void) platform_device_register(&omap_i2c_device2);
}
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 6d6b25c..03595ee 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -22,7 +22,14 @@
#undef DEBUG
+#ifdef CONFIG_ARCH_OMAP2420
#define GPMC_BASE 0x6800a000
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define GPMC_BASE 0x6E000000
+#endif
+
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
#define GPMC_SYSSTATUS 0x14
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 871ace4..4dfd878 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,7 +17,13 @@
#include <asm/io.h>
+#if defined(CONFIG_ARCH_OMAP2420)
#define OMAP24XX_TAP_BASE io_p2v(0x48014000)
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+#define OMAP24XX_TAP_BASE io_p2v(0x4900A000)
+#endif
#define OMAP_TAP_IDCODE 0x0204
#define OMAP_TAP_PROD_ID 0x0208
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index a57a429..5a4091f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2005 Nokia Corporation
* Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * Updated map desc to add 2430 support : <x0khasim@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -41,6 +42,20 @@
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
+#ifdef CONFIG_ARCH_OMAP2430
+ {
+ .virtual = L4_WK_243X_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_243X_PHYS),
+ .length = L4_WK_243X_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP243X_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
+ .length = OMAP243X_GPMC_SIZE,
+ .type = MT_DEVICE
+ },
+#endif
{
.virtual = DSP_MEM_24XX_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS),
@@ -81,6 +96,11 @@
{
omap2_mux_init();
omap2_clk_init();
+/*
+ * Need to Fix this for 2430
+ */
+#ifndef CONFIG_ARCH_OMAP2430
omap2_init_memory();
+#endif
gpmc_init();
}
diff --git a/include/asm-arm/arch-omap/board-2430sdp.h b/include/asm-arm/arch-omap/board-2430sdp.h
new file mode 100644
index 0000000..e9c65ce
--- /dev/null
+++ b/include/asm-arm/arch-omap/board-2430sdp.h
@@ -0,0 +1,44 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ 149
+#define SDP2430_CS0_BASE 0x04000000
+
+#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+
+/* TWL4030 Primary Interrupt Handler (PIH) interrupts */
+#define IH_TWL4030_BASE IH_BOARD_BASE
+#define IH_TWL4030_END (IH_TWL4030_BASE+8)
+#define NR_IRQS (IH_TWL4030_END)
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index e225f4f..98a8eb8 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -318,6 +318,10 @@
#include "board-h4.h"
#endif
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
#ifdef CONFIG_MACH_OMAP_APOLLON
#include "board-apollon.h"
#endif
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 4aca7e3..289082d 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -72,6 +72,16 @@
#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 */
#define L4_24XX_VIRT 0xd8000000
#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */
+#define L4_WK_243X_VIRT 0xd9000000
+#define L4_WK_243X_SIZE SZ_1M
+#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */
+#define OMAP243X_GPMC_VIRT 0xFE000000
+#define OMAP243X_GPMC_SIZE SZ_1M
+#endif
+
#define IO_OFFSET 0x90000000
#define IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
#define io_p2v(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */
diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h
index 708b2fa..14c0f94 100644
--- a/include/asm-arm/arch-omap/omap24xx.h
+++ b/include/asm-arm/arch-omap/omap24xx.h
@@ -8,6 +8,7 @@
*/
#define L4_24XX_BASE 0x48000000
+#define L4_WK_243X_BASE 0x49000000
#define L3_24XX_BASE 0x68000000
/* interrupt controller */
@@ -16,9 +17,20 @@
#define OMAP24XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
+#ifdef CONFIG_ARCH_OMAP2420
#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000)
#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000)
#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000)
+#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define OMAP24XX_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000)
+#define OMAP24XX_PRCM_BASE (L4_WK_243X_BASE + 0x6000)
+#define OMAP24XX_SDRC_BASE (0x6D000000)
+#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8)
+#define OMAP243X_GPMC_BASE 0x6E000000
+#endif
/* DSP SS */
#define OMAP24XX_DSP_BASE 0x58000000