mfd: arizona: Correct small errors in the DT binding documentation
This patch does not alter the binding at all it only brings the
documentation up to date with the existing binding.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 0e295c9..36a0c3d 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -5,9 +5,10 @@
Required properties:
- - compatible : one of the following chip-specific strings:
- "wlf,wm5102"
- "wlf,wm5110"
+ - compatible : One of the following chip-specific strings:
+ "wlf,wm5102"
+ "wlf,wm5110"
+ "wlf,wm8997"
- reg : I2C slave address when connected using I2C, chip select number when
using SPI.
@@ -25,8 +26,9 @@
- #gpio-cells : Must be 2. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- - AVDD1-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply, CPVDD-supply,
- SPKVDDL-supply, SPKVDDR-supply : power supplies for the device, as covered
+ - AVDD-supply, DBVDD1-supply, DBVDD2-supply, DBVDD3-supply (wm5102, wm5110),
+ CPVDD-supply, SPKVDDL-supply (wm5102, wm5110), SPKVDDR-supply (wm5102,
+ wm5110), SPKVDD-supply (wm8997) : Power supplies for the device, as covered
in Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
@@ -46,6 +48,7 @@
compatible = "wlf,wm5102";
reg = <0x1a>;
interrupts = <347>;
+ interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gic>;
@@ -53,10 +56,10 @@
#gpio-cells = <2>;
wlf,gpio-defaults = <
- 0x00000000, /* AIF1TXLRCLK */
- 0xffffffff,
- 0xffffffff,
- 0xffffffff,
- 0xffffffff,
+ 0x00000000 /* AIF1TXLRCLK */
+ 0xffffffff
+ 0xffffffff
+ 0xffffffff
+ 0xffffffff
>;
};