iwlwifi: drop non-production PCI-IDs
Remove the support for all the PCI_IDs never make into production
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 1f769ea..f732f6d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -90,11 +90,7 @@
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* no locking required for register write */
- if (priv->cfg->pa_type == IWL_PA_HYBRID) {
- /* 2x2 hybrid phy type */
- iwl_write32(priv, CSR_GP_DRIVER_REG,
- CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB);
- } else if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
+ if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
@@ -279,98 +275,6 @@
.led = &iwlagn_led_ops,
};
-
-/*
- * "h": Hybrid configuration, use both internal and external Power Amplifier
- */
-struct iwl_cfg iwl6000h_2agn_cfg = {
- .name = "6000 Series 2x2 AGN",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
- .ops = &iwl6000_ops,
- .eeprom_size = OTP_LOW_IMAGE_SIZE,
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .num_of_queues = IWL50_NUM_QUEUES,
- .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
- .mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
- .pa_type = IWL_PA_HYBRID,
- .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
- .shadow_ram_support = true,
- .ht_greenfield_support = true,
- .led_compensation = 51,
- .use_rts_for_ht = true, /* use rts/cts protection */
- .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .supports_idle = true,
- .adv_thermal_throttle = true,
- .support_ct_kill_exit = true,
-};
-
-struct iwl_cfg iwl6000h_2abg_cfg = {
- .name = "6000 Series 2x2 ABG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_A|IWL_SKU_G,
- .ops = &iwl6000_ops,
- .eeprom_size = OTP_LOW_IMAGE_SIZE,
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .num_of_queues = IWL50_NUM_QUEUES,
- .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
- .mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
- .pa_type = IWL_PA_HYBRID,
- .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
- .shadow_ram_support = true,
- .ht_greenfield_support = true,
- .led_compensation = 51,
- .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .supports_idle = true,
- .adv_thermal_throttle = true,
- .support_ct_kill_exit = true,
-};
-
-struct iwl_cfg iwl6000h_2bg_cfg = {
- .name = "6000 Series 2x2 BG",
- .fw_name_pre = IWL6000_FW_PRE,
- .ucode_api_max = IWL6000_UCODE_API_MAX,
- .ucode_api_min = IWL6000_UCODE_API_MIN,
- .sku = IWL_SKU_G,
- .ops = &iwl6000_ops,
- .eeprom_size = OTP_LOW_IMAGE_SIZE,
- .eeprom_ver = EEPROM_6000_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
- .num_of_queues = IWL50_NUM_QUEUES,
- .num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
- .mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_AB,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = false,
- .pa_type = IWL_PA_HYBRID,
- .max_ll_items = OTP_MAX_LL_ITEMS_6x00,
- .shadow_ram_support = true,
- .ht_greenfield_support = true,
- .led_compensation = 51,
- .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .supports_idle = true,
- .adv_thermal_throttle = true,
- .support_ct_kill_exit = true,
-};
-
/*
* "i": Internal configuration, use internal Power Amplifier
*/