drm/i915: Pre-compute pipe enabled state
Add 'new_enabled' to intel_crtc and precompute it alongside new_encoder
and new_crtc. This will allow making decisions about shared resources
that are affected by the set of active pipes, before we've clobbered
anything for real.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 40a9338..204c09c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8774,6 +8774,7 @@
*/
static void intel_modeset_update_staged_output_state(struct drm_device *dev)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
@@ -8788,6 +8789,11 @@
encoder->new_crtc =
to_intel_crtc(encoder->base.crtc);
}
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->new_enabled = crtc->base.enabled;
+ }
}
/**
@@ -8797,6 +8803,7 @@
*/
static void intel_modeset_commit_output_state(struct drm_device *dev)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
@@ -8809,6 +8816,11 @@
base.head) {
encoder->base.crtc = &encoder->new_crtc->base;
}
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->base.enabled = crtc->new_enabled;
+ }
}
static void
@@ -9135,29 +9147,22 @@
*prepare_pipes |= 1 << encoder->new_crtc->pipe;
}
- /* Check for any pipes that will be fully disabled ... */
+ /* Check for pipes that will be enabled/disabled ... */
list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
base.head) {
- bool used = false;
-
- /* Don't try to disable disabled crtcs. */
- if (!intel_crtc->base.enabled)
+ if (intel_crtc->base.enabled == intel_crtc->new_enabled)
continue;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list,
- base.head) {
- if (encoder->new_crtc == intel_crtc)
- used = true;
- }
-
- if (!used)
+ if (!intel_crtc->new_enabled)
*disable_pipes |= 1 << intel_crtc->pipe;
+ else
+ *prepare_pipes |= 1 << intel_crtc->pipe;
}
/* set_mode is also used to update properties on life display pipes. */
intel_crtc = to_intel_crtc(crtc);
- if (crtc->enabled)
+ if (intel_crtc->new_enabled)
*prepare_pipes |= 1 << intel_crtc->pipe;
/*
@@ -9216,10 +9221,10 @@
intel_modeset_commit_output_state(dev);
- /* Update computed state. */
+ /* Double check state. */
list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
base.head) {
- intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
+ WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -9754,16 +9759,24 @@
kfree(config->save_connector_encoders);
kfree(config->save_encoder_crtcs);
+ kfree(config->save_crtc_enabled);
kfree(config);
}
static int intel_set_config_save_state(struct drm_device *dev,
struct intel_set_config *config)
{
+ struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_connector *connector;
int count;
+ config->save_crtc_enabled =
+ kcalloc(dev->mode_config.num_crtc,
+ sizeof(bool), GFP_KERNEL);
+ if (!config->save_crtc_enabled)
+ return -ENOMEM;
+
config->save_encoder_crtcs =
kcalloc(dev->mode_config.num_encoder,
sizeof(struct drm_crtc *), GFP_KERNEL);
@@ -9781,6 +9794,11 @@
* restored, not the drivers personal bookkeeping.
*/
count = 0;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ config->save_crtc_enabled[count++] = crtc->enabled;
+ }
+
+ count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
config->save_encoder_crtcs[count++] = encoder->crtc;
}
@@ -9796,11 +9814,17 @@
static void intel_set_config_restore_state(struct drm_device *dev,
struct intel_set_config *config)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
int count;
count = 0;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ crtc->new_enabled = config->save_crtc_enabled[count++];
+ }
+
+ count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
encoder->new_crtc =
to_intel_crtc(config->save_encoder_crtcs[count++]);
@@ -9884,9 +9908,9 @@
struct drm_mode_set *set,
struct intel_set_config *config)
{
- struct drm_crtc *new_crtc;
struct intel_connector *connector;
struct intel_encoder *encoder;
+ struct intel_crtc *crtc;
int ro;
/* The upper layers ensure that we either disable a crtc or have a list
@@ -9929,6 +9953,8 @@
/* Update crtc of enabled connectors. */
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
+ struct drm_crtc *new_crtc;
+
if (!connector->new_encoder)
continue;
@@ -9979,6 +10005,26 @@
}
/* Now we've also updated encoder->new_crtc for all encoders. */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->new_enabled = false;
+
+ list_for_each_entry(encoder,
+ &dev->mode_config.encoder_list,
+ base.head) {
+ if (encoder->new_crtc == crtc) {
+ crtc->new_enabled = true;
+ break;
+ }
+ }
+
+ if (crtc->new_enabled != crtc->base.enabled) {
+ DRM_DEBUG_KMS("crtc %sabled, full mode switch\n",
+ crtc->new_enabled ? "en" : "dis");
+ config->mode_changed = true;
+ }
+ }
+
return 0;
}