drm/i915/vlv: WA to fix Voltage not getting dropped to Vmin when Gfx is power gated.
When we enter RC6 and GFX Clocks are off, the voltage remains higher
than Vmin. When we try to set the freq to RPn, it might fail since the
Gfx clocks are down. So to fix this in Gfx idle, Bring the GFX clock up
and set the freq to RPn then move GFx down.
v2: remove vlv_update_rps_cur_delay function. Update commit message (Daniel)
v3: Fix the timeout during wait for gfx clock (Jesse)
v4: addressed comments on set freq and punit wait (Ville)
v5: use wait_for while waiting for GFX clk to be up. (Daniel)
update cur_delay before requesting min_delay. (Ville)
v6: use wait_for while waiting for punit. (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index df18bb6..9ab3883 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3038,6 +3038,58 @@
trace_intel_gpu_freq_change(val * 50);
}
+/* vlv_set_rps_idle: Set the frequency to Rpn if Gfx clocks are down
+ *
+ * * If Gfx is Idle, then
+ * 1. Mask Turbo interrupts
+ * 2. Bring up Gfx clock
+ * 3. Change the freq to Rpn and wait till P-Unit updates freq
+ * 4. Clear the Force GFX CLK ON bit so that Gfx can down
+ * 5. Unmask Turbo interrupts
+*/
+static void vlv_set_rps_idle(struct drm_i915_private *dev_priv)
+{
+ /*
+ * When we are idle. Drop to min voltage state.
+ */
+
+ if (dev_priv->rps.cur_delay <= dev_priv->rps.min_delay)
+ return;
+
+ /* Mask turbo interrupt so that they will not come in between */
+ I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
+
+ /* Bring up the Gfx clock */
+ I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
+ I915_READ(VLV_GTLC_SURVIVABILITY_REG) |
+ VLV_GFX_CLK_FORCE_ON_BIT);
+
+ if (wait_for(((VLV_GFX_CLK_STATUS_BIT &
+ I915_READ(VLV_GTLC_SURVIVABILITY_REG)) != 0), 5)) {
+ DRM_ERROR("GFX_CLK_ON request timed out\n");
+ return;
+ }
+
+ dev_priv->rps.cur_delay = dev_priv->rps.min_delay;
+
+ vlv_punit_write(dev_priv, PUNIT_REG_GPU_FREQ_REQ,
+ dev_priv->rps.min_delay);
+
+ if (wait_for(((vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS))
+ & GENFREQSTATUS) == 0, 5))
+ DRM_ERROR("timed out waiting for Punit\n");
+
+ /* Release the Gfx clock */
+ I915_WRITE(VLV_GTLC_SURVIVABILITY_REG,
+ I915_READ(VLV_GTLC_SURVIVABILITY_REG) &
+ ~VLV_GFX_CLK_FORCE_ON_BIT);
+
+ /* Unmask Up interrupts */
+ dev_priv->rps.rp_up_masked = true;
+ gen6_set_pm_mask(dev_priv, GEN6_PM_RP_DOWN_THRESHOLD,
+ dev_priv->rps.min_delay);
+}
+
void gen6_rps_idle(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
@@ -3045,7 +3097,7 @@
mutex_lock(&dev_priv->rps.hw_lock);
if (dev_priv->rps.enabled) {
if (IS_VALLEYVIEW(dev))
- valleyview_set_rps(dev_priv->dev, dev_priv->rps.min_delay);
+ vlv_set_rps_idle(dev_priv);
else
gen6_set_rps(dev_priv->dev, dev_priv->rps.min_delay);
dev_priv->rps.last_adj = 0;
@@ -4276,6 +4328,7 @@
i915_mch_dev = NULL;
spin_unlock_irq(&mchdev_lock);
}
+
static void intel_init_emon(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;