diff --git a/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c b/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c
new file mode 100644
index 0000000..c4fcbc2
--- /dev/null
+++ b/drivers/scsi/mpt2sas/mpt2sas_warpdrive.c
@@ -0,0 +1,338 @@
+/*
+ * Scsi Host Layer for MPT (Message Passing Technology) based controllers
+ *
+ * Copyright (C) 2012-2014  LSI Corporation
+ * Copyright (C) 2013-2015 Avago Technologies
+ *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * NO WARRANTY
+ * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ * solely responsible for determining the appropriateness of using and
+ * distributing the Program and assumes all risks associated with its
+ * exercise of rights under this Agreement, including but not limited to
+ * the risks and costs of program errors, damage to or loss of data,
+ * programs or equipment, and unavailability or interruption of operations.
+
+ * DISCLAIMER OF LIABILITY
+ * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program.
+ */
+
+/**
+ * _scsih_disable_ddio - Disable direct I/O for all the volumes
+ * @ioc: per adapter object
+ */
+static void
+_scsih_disable_ddio(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	struct _raid_device *raid_device;
+	u16 handle;
+	u16 ioc_status;
+	unsigned long flags;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+		spin_lock_irqsave(&ioc->raid_device_lock, flags);
+		raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
+		if (raid_device)
+			raid_device->direct_io_enabled = 0;
+		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
+	}
+	return;
+}
+
+
+/**
+ * _scsih_get_num_volumes - Get number of volumes in the ioc
+ * @ioc: per adapter object
+ */
+static u8
+_scsih_get_num_volumes(struct MPT3SAS_ADAPTER *ioc)
+{
+	Mpi2RaidVolPage1_t vol_pg1;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 handle;
+	u8 vol_cnt = 0;
+	u16 ioc_status;
+
+	handle = 0xFFFF;
+	while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
+	    &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+		ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+		    MPI2_IOCSTATUS_MASK;
+		if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
+			break;
+		vol_cnt++;
+		handle = le16_to_cpu(vol_pg1.DevHandle);
+	}
+	return vol_cnt;
+}
+
+
+/**
+ * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
+ * @ioc: per adapter object
+ * @raid_device: the raid_device object
+ */
+static void
+_scsih_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc,
+	struct _raid_device *raid_device)
+{
+	Mpi2RaidVolPage0_t *vol_pg0;
+	Mpi2RaidPhysDiskPage0_t pd_pg0;
+	Mpi2ConfigReply_t mpi_reply;
+	u16 sz;
+	u8 num_pds, count;
+	unsigned long stripe_sz, block_sz;
+	u8 stripe_exp, block_exp;
+	u64 dev_max_lba;
+
+	if (!ioc->is_warpdrive)
+		return;
+
+	if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as drives are exposed\n", ioc->name);
+		return;
+	}
+	if (_scsih_get_num_volumes(ioc) > 1) {
+		_scsih_disable_ddio(ioc);
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "globally as number of drives > 1\n", ioc->name);
+		return;
+	}
+	if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
+	    &num_pds)) || !num_pds) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in computing number of drives\n", ioc->name);
+		return;
+	}
+
+	sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
+	    sizeof(Mpi2RaidVol0PhysDisk_t));
+	vol_pg0 = kzalloc(sz, GFP_KERNEL);
+	if (!vol_pg0) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Memory allocation failure for RVPG0\n", ioc->name);
+		return;
+	}
+
+	if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
+	     MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "Failure in retrieving RVPG0\n", ioc->name);
+		kfree(vol_pg0);
+		return;
+	}
+
+	/*
+	 * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
+	 * assumed for WARPDRIVE, disable direct I/O
+	 */
+	if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
+		pr_warn(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): num_mem=%d, "
+		    "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
+		    num_pds, MPT_MAX_WARPDRIVE_PDS);
+		kfree(vol_pg0);
+		return;
+	}
+	for (count = 0; count < num_pds; count++) {
+		if (mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
+		    &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
+		    vol_pg0->PhysDisk[count].PhysDiskNum) ||
+		    pd_pg0.DevHandle == MPT3SAS_INVALID_DEVICE_HANDLE) {
+			pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+			    "disabled for the drive with handle(0x%04x) member"
+			    "handle retrieval failed for member number=%d\n",
+			    ioc->name, raid_device->handle,
+			    vol_pg0->PhysDisk[count].PhysDiskNum);
+			goto out_error;
+		}
+		/* Disable direct I/O if member drive lba exceeds 4 bytes */
+		dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
+		if (dev_max_lba >> 32) {
+			pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is "
+			    "disabled for the drive with handle(0x%04x) member"
+			    " handle (0x%04x) unsupported max lba 0x%016llx\n",
+			    ioc->name, raid_device->handle,
+			    le16_to_cpu(pd_pg0.DevHandle),
+			    (unsigned long long)dev_max_lba);
+			goto out_error;
+		}
+
+		raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
+	}
+
+	/*
+	 * Assumption for WD: Direct I/O is not supported if the volume is
+	 * not RAID0
+	 */
+	if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x): type=%d, "
+		    "s_sz=%uK, blk_size=%u\n", ioc->name,
+		    raid_device->handle, raid_device->volume_type,
+		    (le32_to_cpu(vol_pg0->StripeSize) *
+		    le16_to_cpu(vol_pg0->BlockSize)) / 1024,
+		    le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+
+	stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	stripe_exp = find_first_bit(&stripe_sz, 32);
+	if (stripe_exp == 32) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		"for the drive with handle(0x%04x) invalid stripe sz %uK\n",
+		    ioc->name, raid_device->handle,
+		    (le32_to_cpu(vol_pg0->StripeSize) *
+		    le16_to_cpu(vol_pg0->BlockSize)) / 1024);
+		goto out_error;
+	}
+	raid_device->stripe_exponent = stripe_exp;
+	block_sz = le16_to_cpu(vol_pg0->BlockSize);
+	block_exp = find_first_bit(&block_sz, 16);
+	if (block_exp == 16) {
+		pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is disabled "
+		    "for the drive with handle(0x%04x) invalid block sz %u\n",
+		    ioc->name, raid_device->handle,
+		    le16_to_cpu(vol_pg0->BlockSize));
+		goto out_error;
+	}
+	raid_device->block_exponent = block_exp;
+	raid_device->direct_io_enabled = 1;
+
+	pr_info(MPT3SAS_FMT "WarpDrive : Direct IO is Enabled for the drive"
+	    " with handle(0x%04x)\n", ioc->name, raid_device->handle);
+	/*
+	 * WARPDRIVE: Though the following fields are not used for direct IO,
+	 * stored for future purpose:
+	 */
+	raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
+	raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
+	raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
+
+
+	kfree(vol_pg0);
+	return;
+
+out_error:
+	raid_device->direct_io_enabled = 0;
+	for (count = 0; count < num_pds; count++)
+		raid_device->pd_handle[count] = 0;
+	kfree(vol_pg0);
+	return;
+}
+
+/**
+ * _scsih_scsi_direct_io_get - returns direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Returns the smid stored scmd pointer.
+ */
+static inline u8
+_scsih_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
+{
+	return ioc->scsi_lookup[smid - 1].direct_io;
+}
+
+/**
+ * _scsih_scsi_direct_io_set - sets direct io flag
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @direct_io: Zero or non-zero value to set in the direct_io flag
+ *
+ * Returns Nothing.
+ */
+static inline void
+_scsih_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
+{
+	ioc->scsi_lookup[smid - 1].direct_io = direct_io;
+}
+
+/**
+ * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ * @raid_device: pointer to raid device data structure
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ * @smid: system request message index
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_direct_io(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
+	struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
+	u16 smid)
+{
+	sector_t v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
+	u32 stripe_sz, stripe_exp;
+	u8 num_pds, cmd = scmd->cmnd[0];
+
+	if (cmd != READ_10 && cmd != WRITE_10 &&
+	    cmd != READ_16 && cmd != WRITE_16)
+		return;
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
+	else
+		v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
+
+	io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
+
+	if (v_lba + io_size - 1 > raid_device->max_lba)
+		return;
+
+	stripe_sz = raid_device->stripe_sz;
+	stripe_exp = raid_device->stripe_exponent;
+	stripe_off = v_lba & (stripe_sz - 1);
+
+	/* Return unless IO falls within a stripe */
+	if (stripe_off + io_size > stripe_sz)
+		return;
+
+	num_pds = raid_device->num_pds;
+	p_lba = v_lba >> stripe_exp;
+	stripe_unit = p_lba / num_pds;
+	column = p_lba % num_pds;
+	p_lba = (stripe_unit << stripe_exp) + stripe_off;
+	mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
+
+	if (cmd == READ_10 || cmd == WRITE_10)
+		put_unaligned_be32(lower_32_bits(p_lba),
+				   &mpi_request->CDB.CDB32[2]);
+	else
+		put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
+
+	_scsih_scsi_direct_io_set(ioc, smid, 1);
+}