cfg80211: clean up signal type
It wasn't a good idea to make the signal type a per-BSS option,
although then it is closer to the actual value. Move it to be
a per-wiphy setting, update mac80211 to match.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index fce9d08..f38db4d 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -861,6 +861,11 @@
/* mac80211 always supports monitor */
local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+ if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
+ local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+ else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
+ local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+
result = wiphy_register(local->hw.wiphy);
if (result < 0)
goto fail_wiphy_register;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index c063f82..23f4de2 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -63,20 +63,15 @@
{
struct ieee80211_bss *bss;
int clen;
- enum cfg80211_signal_type sigtype = CFG80211_SIGNAL_TYPE_NONE;
s32 signal = 0;
- if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
- sigtype = CFG80211_SIGNAL_TYPE_MBM;
+ if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
signal = rx_status->signal * 100;
- } else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) {
- sigtype = CFG80211_SIGNAL_TYPE_UNSPEC;
+ else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
signal = (rx_status->signal * 100) / local->hw.max_signal;
- }
bss = (void *)cfg80211_inform_bss_frame(local->hw.wiphy, channel,
- mgmt, len, signal, sigtype,
- GFP_ATOMIC);
+ mgmt, len, signal, GFP_ATOMIC);
if (!bss)
return NULL;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 245fddc..a7e751e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2457,7 +2457,7 @@
NLA_PUT_U16(msg, NL80211_BSS_CAPABILITY, res->capability);
NLA_PUT_U32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq);
- switch (res->signal_type) {
+ switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
NLA_PUT_U32(msg, NL80211_BSS_SIGNAL_MBM, res->signal);
break;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 01c136d..6060065 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -370,7 +370,6 @@
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
- found->pub.signal_type = res->pub.signal_type;
found->pub.capability = res->pub.capability;
found->ts = res->ts;
kref_put(&res->ref, bss_release);
@@ -392,8 +391,7 @@
cfg80211_inform_bss_frame(struct wiphy *wiphy,
struct ieee80211_channel *channel,
struct ieee80211_mgmt *mgmt, size_t len,
- s32 signal, enum cfg80211_signal_type sigtype,
- gfp_t gfp)
+ s32 signal, gfp_t gfp)
{
struct cfg80211_internal_bss *res;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
@@ -401,7 +399,7 @@
bool overwrite;
size_t privsz = wiphy->bss_priv_size;
- if (WARN_ON(sigtype == NL80211_BSS_SIGNAL_UNSPEC &&
+ if (WARN_ON(wiphy->signal_type == NL80211_BSS_SIGNAL_UNSPEC &&
(signal < 0 || signal > 100)))
return NULL;
@@ -415,7 +413,6 @@
memcpy(res->pub.bssid, mgmt->bssid, ETH_ALEN);
res->pub.channel = channel;
- res->pub.signal_type = sigtype;
res->pub.signal = signal;
res->pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
res->pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
@@ -607,9 +604,9 @@
}
static char *
-ieee80211_bss(struct iw_request_info *info,
- struct cfg80211_internal_bss *bss,
- char *current_ev, char *end_buf)
+ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info,
+ struct cfg80211_internal_bss *bss, char *current_ev,
+ char *end_buf)
{
struct iw_event iwe;
u8 *buf, *cfg, *p;
@@ -638,13 +635,13 @@
current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
- if (bss->pub.signal_type != CFG80211_SIGNAL_TYPE_NONE) {
+ if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED |
IW_QUAL_NOISE_INVALID |
IW_QUAL_QUAL_UPDATED;
- switch (bss->pub.signal_type) {
+ switch (wiphy->signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
sig = bss->pub.signal / 100;
iwe.u.qual.level = sig;
@@ -823,8 +820,8 @@
spin_unlock_bh(&dev->bss_lock);
return -E2BIG;
}
- current_ev = ieee80211_bss(info, bss,
- current_ev, end_buf);
+ current_ev = ieee80211_bss(&dev->wiphy, info, bss,
+ current_ev, end_buf);
}
spin_unlock_bh(&dev->bss_lock);
return current_ev - buf;