MIPS: Cosmetic cleanups of page table headers.

   * Clean up white spaces and tabs.
   * Remove _PAGE_R4KBUG which is no longer used.
   * Get rid of hardcoded values and calculate shifts and
     masks where possible.

Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h
index 3021a94..68984b6 100644
--- a/arch/mips/include/asm/pgtable-32.h
+++ b/arch/mips/include/asm/pgtable-32.h
@@ -155,73 +155,75 @@
 #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
 
 /* Swap entries must have VALID bit cleared. */
-#define __swp_type(x)		(((x).val >> 10) & 0x1f)
-#define __swp_offset(x)		((x).val >> 15)
-#define __swp_entry(type,offset)	\
-	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+#define __swp_type(x)			(((x).val >> 10) & 0x1f)
+#define __swp_offset(x)			((x).val >> 15)
+#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(_pte)		((((_pte).pte >> 1 ) & 0x07) | \
+					 (((_pte).pte >> 2 ) & 0x38) | \
+					 (((_pte).pte >> 10) <<	 6 ))
+
+#define pgoff_to_pte(off)		((pte_t) { (((off) & 0x07) << 1 ) | \
+						   (((off) & 0x38) << 2 ) | \
+						   (((off) >>  6 ) << 10) | \
+						   _PAGE_FILE })
 
 /*
  * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
  */
-#define PTE_FILE_MAX_BITS	28
-
-#define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
-				 (((_pte).pte >> 2 ) & 0x38) | \
-				 (((_pte).pte >> 10) <<	 6 ))
-
-#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
-					   (((off) & 0x38) << 2 ) | \
-					   (((off) >>  6 ) << 10) | \
-					   _PAGE_FILE })
-
+#define PTE_FILE_MAX_BITS		28
 #else
 
+#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+
 /* Swap entries must have VALID and GLOBAL bits cleared. */
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
-#define __swp_type(x)		(((x).val >> 2) & 0x1f)
-#define __swp_offset(x)		 ((x).val >> 7)
-#define __swp_entry(type,offset)	\
-		((swp_entry_t)	{ ((type) << 2) | ((offset) << 7) })
-#else
-#define __swp_type(x)		(((x).val >> 8) & 0x1f)
-#define __swp_offset(x)		 ((x).val >> 13)
-#define __swp_entry(type,offset)	\
-		((swp_entry_t)	{ ((type) << 8) | ((offset) << 13) })
-#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
+#define __swp_type(x)			(((x).val >> 2) & 0x1f)
+#define __swp_offset(x)			 ((x).val >> 7)
+#define __swp_entry(type,offset)	((swp_entry_t)	{ ((type) << 2) | ((offset) << 7) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t) { 0, (x).val })
 
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
 /*
  * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
  */
-#define PTE_FILE_MAX_BITS	30
+#define pte_to_pgoff(_pte)		((_pte).pte_high >> 2)
+#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) << 2 })
 
-#define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
-#define pgoff_to_pte(off)	((pte_t) { _PAGE_FILE, (off) << 2 })
-
+#define PTE_FILE_MAX_BITS		30
 #else
 /*
- * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ * Constraints:
+ *      _PAGE_PRESENT at bit 0
+ *      _PAGE_MODIFIED at bit 4
+ *      _PAGE_GLOBAL at bit 6
+ *      _PAGE_VALID at bit 7
  */
-#define PTE_FILE_MAX_BITS	28
+#define __swp_type(x)			(((x).val >> 8) & 0x1f)
+#define __swp_offset(x)			 ((x).val >> 13)
+#define __swp_entry(type,offset)	((swp_entry_t)	{ ((type) << 8) | ((offset) << 13) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
 
-#define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
-				 (((_pte).pte >> 2) & 0x8) | \
-				 (((_pte).pte >> 8) <<	4))
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(_pte)		((((_pte).pte >> 1) & 0x7) | \
+					 (((_pte).pte >> 2) & 0x8) | \
+					 (((_pte).pte >> 8) <<	4))
 
-#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
-					   (((off) & 0x8) << 2) | \
-					   (((off) >>  4) << 8) | \
-					   _PAGE_FILE })
-#endif
+#define pgoff_to_pte(off)		((pte_t) { (((off) & 0x7) << 1) | \
+						   (((off) & 0x8) << 2) | \
+						   (((off) >>  4) << 8) | \
+						   _PAGE_FILE })
 
-#endif
+#define PTE_FILE_MAX_BITS		28
+#endif /* defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32) */
 
-#if defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
-#define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
-#else
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-#endif
+#endif /* defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) */
 
 #endif /* _ASM_PGTABLE_32_H */