OMAPDSS: HDMI: Use our own omap_video_timings field when setting interface timings
The hdmi driver currently updates only the 'code' member of hdmi_config when
the op omapdss_hdmi_display_set_timing() is called by the hdmi panel driver.
The 'timing' field of hdmi_config is updated only when hdmi_power_on is called.
It makes more sense to configure the whole hdmi_config field in the set_timing
op called by the panel driver. This way, we don't need to call both functions
to ensure that our hdmi_config is configured correctly. Also, we don't need to
calculate hdmi_config during hdmi_power_on, or rely on the omap_video_timings
in the panel's omap_dss_device struct.
The default timings of the hdmi panel are represented in a cleaner form. Since
the hdmi output is now configured by it's own copy of timings (in
hdmi.ip_data.cfg), the panel driver needs to set it to a valid value before
enabling hdmi output. We now call omapdss_hdmi_set_timing() before enabling
hdmi output, this is done to atleast have the hdmi output configured to the
panel's default timings if the DSS user didn't call panel driver's set_timings()
op explicitly.
Signed-off-by: Archit Taneja <archit@ti.com>
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 3682e3f..ea39a99 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -484,7 +484,8 @@
#endif
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev);
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev);
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int omapdss_hdmi_read_edid(u8 *buf, int len);
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index a65dafa..964a195 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -459,7 +459,6 @@
static int hdmi_power_on(struct omap_dss_device *dssdev)
{
int r;
- const struct hdmi_config *timing;
struct omap_video_timings *p;
unsigned long phy;
@@ -469,22 +468,10 @@
dss_mgr_disable(dssdev->manager);
- p = &dssdev->panel.timings;
+ p = &hdmi.ip_data.cfg.timings;
- DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
- dssdev->panel.timings.x_res,
- dssdev->panel.timings.y_res);
+ DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
- timing = hdmi_get_timings();
- if (timing == NULL) {
- /* HDMI code 4 corresponds to 640 * 480 VGA */
- hdmi.ip_data.cfg.cm.code = 4;
- /* DVI mode 1 corresponds to HDMI 0 to DVI */
- hdmi.ip_data.cfg.cm.mode = HDMI_DVI;
- hdmi.ip_data.cfg = vesa_timings[0];
- } else {
- hdmi.ip_data.cfg = *timing;
- }
phy = p->pixel_clock;
hdmi_compute_pll(dssdev, phy, &hdmi.ip_data.pll_data);
@@ -521,7 +508,7 @@
dispc_enable_gamma_table(0);
/* tv size */
- dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+ dss_mgr_set_timings(dssdev->manager, p);
r = hdmi.ip_data.ops->video_enable(&hdmi.ip_data);
if (r)
@@ -568,13 +555,18 @@
}
-void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
+void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
{
struct hdmi_cm cm;
+ const struct hdmi_config *t;
- cm = hdmi_get_code(&dssdev->panel.timings);
- hdmi.ip_data.cfg.cm.code = cm.code;
- hdmi.ip_data.cfg.cm.mode = cm.mode;
+ cm = hdmi_get_code(timings);
+ hdmi.ip_data.cfg.cm = cm;
+
+ t = hdmi_get_timings();
+ if (t != NULL)
+ hdmi.ip_data.cfg = *t;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
int r;
@@ -585,7 +577,7 @@
if (r)
DSSERR("failed to power on device\n");
} else {
- dss_mgr_set_timings(dssdev->manager, &dssdev->panel.timings);
+ dss_mgr_set_timings(dssdev->manager, &t->timings);
}
}
@@ -930,6 +922,7 @@
hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
hdmi.ip_data.phy_offset = HDMI_PHY;
+
mutex_init(&hdmi.ip_data.lock);
hdmi_panel_init();
diff --git a/drivers/video/omap2/dss/hdmi_panel.c b/drivers/video/omap2/dss/hdmi_panel.c
index e10844f..2feb2cd 100644
--- a/drivers/video/omap2/dss/hdmi_panel.c
+++ b/drivers/video/omap2/dss/hdmi_panel.c
@@ -41,17 +41,32 @@
static int hdmi_panel_probe(struct omap_dss_device *dssdev)
{
+ /* Initialize default timings to VGA in DVI mode */
+ const struct omap_video_timings default_timings = {
+ .x_res = 640,
+ .y_res = 480,
+ .pixel_clock = 25175,
+ .hsw = 96,
+ .hfp = 16,
+ .hbp = 48,
+ .vsw = 2,
+ .vfp = 11,
+ .vbp = 31,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+
+ .interlace = false,
+ };
+
DSSDBG("ENTER hdmi_panel_probe\n");
- dssdev->panel.timings = (struct omap_video_timings)
- { 640, 480, 25175, 96, 16, 48, 2, 11, 31,
- OMAPDSS_SIG_ACTIVE_LOW, OMAPDSS_SIG_ACTIVE_LOW,
- false,
- };
+ dssdev->panel.timings = default_timings;
DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
+
return 0;
}
@@ -228,6 +243,8 @@
goto err;
}
+ omapdss_hdmi_display_set_timing(dssdev, &dssdev->panel.timings);
+
r = omapdss_hdmi_display_enable(dssdev);
if (r) {
DSSERR("failed to power on\n");
@@ -336,8 +353,8 @@
*/
hdmi_panel_audio_disable(dssdev);
+ omapdss_hdmi_display_set_timing(dssdev, timings);
dssdev->panel.timings = *timings;
- omapdss_hdmi_display_set_timing(dssdev);
mutex_unlock(&hdmi.lock);
}