MIPS: Alchemy: Stop IRQ name sharing
Eliminate the sharing of IRQ names among the differenct Alchemy
variants. IRQ numbers need no longer be hidden behind a
CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy
code less reliant on a hardcoded subtype.
This patch also renames the GPIO irq number constants. It's really
an interrupt line, NOT a GPIO number!
Code which relied on certain irq numbers to have the same name
across all supported cpu subtypes is changed to determine current
cpu subtype at runtime; in some places this isn't possible so
a "compat" symbol is used.
Run-tested on DB1200.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c
index b762b79..0ac5dd0 100644
--- a/arch/mips/alchemy/devboards/db1x00/platform.c
+++ b/arch/mips/alchemy/devboards/db1x00/platform.c
@@ -24,32 +24,46 @@
#include <asm/mach-au1x00/au1xxx.h>
#include "../platform.h"
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
- defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
-#define DB1XXX_HAS_PCMCIA
-#endif
-
/* DB1xxx PCMCIA interrupt sources:
* CD0/1 GPIO0/3
* STSCHG0/1 GPIO1/4
* CARD0/1 GPIO2/5
* Db1550: 0/1, 21/22, 3/5
*/
-#ifndef CONFIG_MIPS_DB1550
-/* Db1000, Db1100, Db1500 */
-#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
-#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO_1
-#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_2
-#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_3
-#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO_4
-#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
+
+#define DB1XXX_HAS_PCMCIA
+
+#if defined(CONFIG_MIPS_DB1000)
+#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1100)
+#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1500)
+#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT
+#elif defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT
+#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT
+#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT
+#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT
+#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT
#else
-#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
-#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO_21
-#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_3
-#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_1
-#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO_22
-#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
+/* other board: no PCMCIA */
+#undef DB1XXX_HAS_PCMCIA
#endif
static int __init db1xxx_dev_init(void)