| /* |
| * 2.5 block I/O model |
| * |
| * Copyright (C) 2001 Jens Axboe <axboe@suse.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public Licens |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111- |
| */ |
| #ifndef __LINUX_BIO_H |
| #define __LINUX_BIO_H |
| |
| #include <linux/highmem.h> |
| #include <linux/mempool.h> |
| #include <linux/ioprio.h> |
| |
| /* Platforms may set this to teach the BIO layer about IOMMU hardware. */ |
| #include <asm/io.h> |
| |
| #if defined(BIO_VMERGE_MAX_SIZE) && defined(BIO_VMERGE_BOUNDARY) |
| #define BIOVEC_VIRT_START_SIZE(x) (bvec_to_phys(x) & (BIO_VMERGE_BOUNDARY - 1)) |
| #define BIOVEC_VIRT_OVERSIZE(x) ((x) > BIO_VMERGE_MAX_SIZE) |
| #else |
| #define BIOVEC_VIRT_START_SIZE(x) 0 |
| #define BIOVEC_VIRT_OVERSIZE(x) 0 |
| #endif |
| |
| #ifndef BIO_VMERGE_BOUNDARY |
| #define BIO_VMERGE_BOUNDARY 0 |
| #endif |
| |
| #define BIO_DEBUG |
| |
| #ifdef BIO_DEBUG |
| #define BIO_BUG_ON BUG_ON |
| #else |
| #define BIO_BUG_ON |
| #endif |
| |
| #define BIO_MAX_PAGES (256) |
| #define BIO_MAX_SIZE (BIO_MAX_PAGES << PAGE_CACHE_SHIFT) |
| #define BIO_MAX_SECTORS (BIO_MAX_SIZE >> 9) |
| |
| /* |
| * was unsigned short, but we might as well be ready for > 64kB I/O pages |
| */ |
| struct bio_vec { |
| struct page *bv_page; |
| unsigned int bv_len; |
| unsigned int bv_offset; |
| }; |
| |
| struct bio_set; |
| struct bio; |
| typedef int (bio_end_io_t) (struct bio *, unsigned int, int); |
| typedef void (bio_destructor_t) (struct bio *); |
| |
| /* |
| * main unit of I/O for the block layer and lower layers (ie drivers and |
| * stacking drivers) |
| */ |
| struct bio { |
| sector_t bi_sector; |
| struct bio *bi_next; /* request queue link */ |
| struct block_device *bi_bdev; |
| unsigned long bi_flags; /* status, command, etc */ |
| unsigned long bi_rw; /* bottom bits READ/WRITE, |
| * top bits priority |
| */ |
| |
| unsigned short bi_vcnt; /* how many bio_vec's */ |
| unsigned short bi_idx; /* current index into bvl_vec */ |
| |
| /* Number of segments in this BIO after |
| * physical address coalescing is performed. |
| */ |
| unsigned short bi_phys_segments; |
| |
| /* Number of segments after physical and DMA remapping |
| * hardware coalescing is performed. |
| */ |
| unsigned short bi_hw_segments; |
| |
| unsigned int bi_size; /* residual I/O count */ |
| |
| /* |
| * To keep track of the max hw size, we account for the |
| * sizes of the first and last virtually mergeable segments |
| * in this bio |
| */ |
| unsigned int bi_hw_front_size; |
| unsigned int bi_hw_back_size; |
| |
| unsigned int bi_max_vecs; /* max bvl_vecs we can hold */ |
| |
| struct bio_vec *bi_io_vec; /* the actual vec list */ |
| |
| bio_end_io_t *bi_end_io; |
| atomic_t bi_cnt; /* pin count */ |
| |
| void *bi_private; |
| |
| bio_destructor_t *bi_destructor; /* destructor */ |
| }; |
| |
| /* |
| * bio flags |
| */ |
| #define BIO_UPTODATE 0 /* ok after I/O completion */ |
| #define BIO_RW_BLOCK 1 /* RW_AHEAD set, and read/write would block */ |
| #define BIO_EOF 2 /* out-out-bounds error */ |
| #define BIO_SEG_VALID 3 /* nr_hw_seg valid */ |
| #define BIO_CLONED 4 /* doesn't own data */ |
| #define BIO_BOUNCED 5 /* bio is a bounce bio */ |
| #define BIO_USER_MAPPED 6 /* contains user pages */ |
| #define BIO_EOPNOTSUPP 7 /* not supported */ |
| #define bio_flagged(bio, flag) ((bio)->bi_flags & (1 << (flag))) |
| |
| /* |
| * top 4 bits of bio flags indicate the pool this bio came from |
| */ |
| #define BIO_POOL_BITS (4) |
| #define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS) |
| #define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET) |
| #define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET) |
| |
| /* |
| * bio bi_rw flags |
| * |
| * bit 0 -- read (not set) or write (set) |
| * bit 1 -- rw-ahead when set |
| * bit 2 -- barrier |
| * bit 3 -- fail fast, don't want low level driver retries |
| * bit 4 -- synchronous I/O hint: the block layer will unplug immediately |
| */ |
| #define BIO_RW 0 |
| #define BIO_RW_AHEAD 1 |
| #define BIO_RW_BARRIER 2 |
| #define BIO_RW_FAILFAST 3 |
| #define BIO_RW_SYNC 4 |
| |
| /* |
| * upper 16 bits of bi_rw define the io priority of this bio |
| */ |
| #define BIO_PRIO_SHIFT (8 * sizeof(unsigned long) - IOPRIO_BITS) |
| #define bio_prio(bio) ((bio)->bi_rw >> BIO_PRIO_SHIFT) |
| #define bio_prio_valid(bio) ioprio_valid(bio_prio(bio)) |
| |
| #define bio_set_prio(bio, prio) do { \ |
| WARN_ON(prio >= (1 << IOPRIO_BITS)); \ |
| (bio)->bi_rw &= ((1UL << BIO_PRIO_SHIFT) - 1); \ |
| (bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT); \ |
| } while (0) |
| |
| /* |
| * various member access, note that bio_data should of course not be used |
| * on highmem page vectors |
| */ |
| #define bio_iovec_idx(bio, idx) (&((bio)->bi_io_vec[(idx)])) |
| #define bio_iovec(bio) bio_iovec_idx((bio), (bio)->bi_idx) |
| #define bio_page(bio) bio_iovec((bio))->bv_page |
| #define bio_offset(bio) bio_iovec((bio))->bv_offset |
| #define bio_segments(bio) ((bio)->bi_vcnt - (bio)->bi_idx) |
| #define bio_sectors(bio) ((bio)->bi_size >> 9) |
| #define bio_cur_sectors(bio) (bio_iovec(bio)->bv_len >> 9) |
| #define bio_data(bio) (page_address(bio_page((bio))) + bio_offset((bio))) |
| #define bio_barrier(bio) ((bio)->bi_rw & (1 << BIO_RW_BARRIER)) |
| #define bio_sync(bio) ((bio)->bi_rw & (1 << BIO_RW_SYNC)) |
| #define bio_failfast(bio) ((bio)->bi_rw & (1 << BIO_RW_FAILFAST)) |
| #define bio_rw_ahead(bio) ((bio)->bi_rw & (1 << BIO_RW_AHEAD)) |
| |
| /* |
| * will die |
| */ |
| #define bio_to_phys(bio) (page_to_phys(bio_page((bio))) + (unsigned long) bio_offset((bio))) |
| #define bvec_to_phys(bv) (page_to_phys((bv)->bv_page) + (unsigned long) (bv)->bv_offset) |
| |
| /* |
| * queues that have highmem support enabled may still need to revert to |
| * PIO transfers occasionally and thus map high pages temporarily. For |
| * permanent PIO fall back, user is probably better off disabling highmem |
| * I/O completely on that queue (see ide-dma for example) |
| */ |
| #define __bio_kmap_atomic(bio, idx, kmtype) \ |
| (kmap_atomic(bio_iovec_idx((bio), (idx))->bv_page, kmtype) + \ |
| bio_iovec_idx((bio), (idx))->bv_offset) |
| |
| #define __bio_kunmap_atomic(addr, kmtype) kunmap_atomic(addr, kmtype) |
| |
| /* |
| * merge helpers etc |
| */ |
| |
| #define __BVEC_END(bio) bio_iovec_idx((bio), (bio)->bi_vcnt - 1) |
| #define __BVEC_START(bio) bio_iovec_idx((bio), (bio)->bi_idx) |
| |
| /* |
| * allow arch override, for eg virtualized architectures (put in asm/io.h) |
| */ |
| #ifndef BIOVEC_PHYS_MERGEABLE |
| #define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ |
| ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) |
| #endif |
| |
| #define BIOVEC_VIRT_MERGEABLE(vec1, vec2) \ |
| ((((bvec_to_phys((vec1)) + (vec1)->bv_len) | bvec_to_phys((vec2))) & (BIO_VMERGE_BOUNDARY - 1)) == 0) |
| #define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \ |
| (((addr1) | (mask)) == (((addr2) - 1) | (mask))) |
| #define BIOVEC_SEG_BOUNDARY(q, b1, b2) \ |
| __BIO_SEG_BOUNDARY(bvec_to_phys((b1)), bvec_to_phys((b2)) + (b2)->bv_len, (q)->seg_boundary_mask) |
| #define BIO_SEG_BOUNDARY(q, b1, b2) \ |
| BIOVEC_SEG_BOUNDARY((q), __BVEC_END((b1)), __BVEC_START((b2))) |
| |
| #define bio_io_error(bio, bytes) bio_endio((bio), (bytes), -EIO) |
| |
| /* |
| * drivers should not use the __ version unless they _really_ want to |
| * run through the entire bio and not just pending pieces |
| */ |
| #define __bio_for_each_segment(bvl, bio, i, start_idx) \ |
| for (bvl = bio_iovec_idx((bio), (start_idx)), i = (start_idx); \ |
| i < (bio)->bi_vcnt; \ |
| bvl++, i++) |
| |
| #define bio_for_each_segment(bvl, bio, i) \ |
| __bio_for_each_segment(bvl, bio, i, (bio)->bi_idx) |
| |
| /* |
| * get a reference to a bio, so it won't disappear. the intended use is |
| * something like: |
| * |
| * bio_get(bio); |
| * submit_bio(rw, bio); |
| * if (bio->bi_flags ...) |
| * do_something |
| * bio_put(bio); |
| * |
| * without the bio_get(), it could potentially complete I/O before submit_bio |
| * returns. and then bio would be freed memory when if (bio->bi_flags ...) |
| * runs |
| */ |
| #define bio_get(bio) atomic_inc(&(bio)->bi_cnt) |
| |
| |
| /* |
| * A bio_pair is used when we need to split a bio. |
| * This can only happen for a bio that refers to just one |
| * page of data, and in the unusual situation when the |
| * page crosses a chunk/device boundary |
| * |
| * The address of the master bio is stored in bio1.bi_private |
| * The address of the pool the pair was allocated from is stored |
| * in bio2.bi_private |
| */ |
| struct bio_pair { |
| struct bio bio1, bio2; |
| struct bio_vec bv1, bv2; |
| atomic_t cnt; |
| int error; |
| }; |
| extern struct bio_pair *bio_split(struct bio *bi, mempool_t *pool, |
| int first_sectors); |
| extern mempool_t *bio_split_pool; |
| extern void bio_pair_release(struct bio_pair *dbio); |
| |
| extern struct bio_set *bioset_create(int, int, int); |
| extern void bioset_free(struct bio_set *); |
| |
| extern struct bio *bio_alloc(gfp_t, int); |
| extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *); |
| extern void bio_put(struct bio *); |
| extern void bio_free(struct bio *, struct bio_set *); |
| |
| extern void bio_endio(struct bio *, unsigned int, int); |
| struct request_queue; |
| extern int bio_phys_segments(struct request_queue *, struct bio *); |
| extern int bio_hw_segments(struct request_queue *, struct bio *); |
| |
| extern void __bio_clone(struct bio *, struct bio *); |
| extern struct bio *bio_clone(struct bio *, gfp_t); |
| |
| extern void bio_init(struct bio *); |
| |
| extern int bio_add_page(struct bio *, struct page *, unsigned int,unsigned int); |
| extern int bio_add_pc_page(struct request_queue *, struct bio *, struct page *, |
| unsigned int, unsigned int); |
| extern int bio_get_nr_vecs(struct block_device *); |
| extern struct bio *bio_map_user(struct request_queue *, struct block_device *, |
| unsigned long, unsigned int, int); |
| struct sg_iovec; |
| extern struct bio *bio_map_user_iov(struct request_queue *, |
| struct block_device *, |
| struct sg_iovec *, int, int); |
| extern void bio_unmap_user(struct bio *); |
| extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, |
| gfp_t); |
| extern void bio_set_pages_dirty(struct bio *bio); |
| extern void bio_check_pages_dirty(struct bio *bio); |
| extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); |
| extern int bio_uncopy_user(struct bio *); |
| void zero_fill_bio(struct bio *bio); |
| |
| #ifdef CONFIG_HIGHMEM |
| /* |
| * remember to add offset! and never ever reenable interrupts between a |
| * bvec_kmap_irq and bvec_kunmap_irq!! |
| * |
| * This function MUST be inlined - it plays with the CPU interrupt flags. |
| */ |
| static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags) |
| { |
| unsigned long addr; |
| |
| /* |
| * might not be a highmem page, but the preempt/irq count |
| * balancing is a lot nicer this way |
| */ |
| local_irq_save(*flags); |
| addr = (unsigned long) kmap_atomic(bvec->bv_page, KM_BIO_SRC_IRQ); |
| |
| BUG_ON(addr & ~PAGE_MASK); |
| |
| return (char *) addr + bvec->bv_offset; |
| } |
| |
| static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags) |
| { |
| unsigned long ptr = (unsigned long) buffer & PAGE_MASK; |
| |
| kunmap_atomic((void *) ptr, KM_BIO_SRC_IRQ); |
| local_irq_restore(*flags); |
| } |
| |
| #else |
| #define bvec_kmap_irq(bvec, flags) (page_address((bvec)->bv_page) + (bvec)->bv_offset) |
| #define bvec_kunmap_irq(buf, flags) do { *(flags) = 0; } while (0) |
| #endif |
| |
| static inline char *__bio_kmap_irq(struct bio *bio, unsigned short idx, |
| unsigned long *flags) |
| { |
| return bvec_kmap_irq(bio_iovec_idx(bio, idx), flags); |
| } |
| #define __bio_kunmap_irq(buf, flags) bvec_kunmap_irq(buf, flags) |
| |
| #define bio_kmap_irq(bio, flags) \ |
| __bio_kmap_irq((bio), (bio)->bi_idx, (flags)) |
| #define bio_kunmap_irq(buf,flags) __bio_kunmap_irq(buf, flags) |
| |
| #endif /* __LINUX_BIO_H */ |