qlcnic: Register netdev in FAILED state for 83xx/84xx
o Without failing probe, register netdev when device is in FAILED state.
o Device will come up with minimum functionality and allow diagnostics and
repair of the adapter.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index b97e4a0..47a33fe 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2307,10 +2307,23 @@
qlcnic_83xx_check_vf(adapter, ent);
adapter->portnum = adapter->ahw->pci_func;
err = qlcnic_83xx_init(adapter, pci_using_dac);
+
if (err) {
- dev_err(&pdev->dev, "%s: failed\n", __func__);
- goto err_out_free_hw;
+ switch (err) {
+ case -ENOTRECOVERABLE:
+ dev_err(&pdev->dev, "Adapter initialization failed due to a faulty hardware. Please reboot\n");
+ dev_err(&pdev->dev, "If reboot doesn't help, please replace the adapter with new one and return the faulty adapter for repair\n");
+ goto err_out_free_hw;
+ case -ENOMEM:
+ dev_err(&pdev->dev, "Adapter initialization failed. Please reboot\n");
+ goto err_out_free_hw;
+ default:
+ dev_err(&pdev->dev, "Adapter initialization failed. A reboot may be required to recover from this failure\n");
+ dev_err(&pdev->dev, "If reboot does not help to recover from this failure, try a flash update of the adapter\n");
+ goto err_out_maintenance_mode;
+ }
}
+
if (qlcnic_sriov_vf_check(adapter))
return 0;
} else {
@@ -2412,8 +2425,16 @@
return err;
err_out_maintenance_mode:
+ set_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state);
netdev->netdev_ops = &qlcnic_netdev_failed_ops;
SET_ETHTOOL_OPS(netdev, &qlcnic_ethtool_failed_ops);
+ ahw->port_type = QLCNIC_XGBE;
+
+ if (qlcnic_83xx_check(adapter))
+ adapter->tgt_status_reg = NULL;
+ else
+ ahw->board_type = QLCNIC_BRDTYPE_P3P_10G_SFP_PLUS;
+
err = register_netdev(netdev);
if (err) {
@@ -2535,12 +2556,11 @@
static int qlcnic_open(struct net_device *netdev)
{
struct qlcnic_adapter *adapter = netdev_priv(netdev);
- u32 state;
int err;
- state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
- if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) {
- netdev_err(netdev, "%s: Device is in FAILED state\n", __func__);
+ if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
+ netdev_err(netdev, "%s: Device is in non-operational state\n",
+ __func__);
return -EIO;
}
@@ -3253,8 +3273,9 @@
return;
state = QLC_SHARED_REG_RD32(adapter, QLCNIC_CRB_DEV_STATE);
- if (state == QLCNIC_DEV_FAILED || state == QLCNIC_DEV_BADBAD) {
- netdev_err(adapter->netdev, "%s: Device is in FAILED state\n",
+
+ if (test_bit(__QLCNIC_MAINTENANCE_MODE, &adapter->state)) {
+ netdev_err(adapter->netdev, "%s: Device is in non-operational state\n",
__func__);
qlcnic_api_unlock(adapter);