| /* |
| * Texas Instruments TNETV107X Keypad Driver |
| * |
| * Copyright (C) 2010 Texas Instruments |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any |
| * kind, whether express or implied; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/module.h> |
| |
| #define BITS(x) (BIT(x) - 1) |
| |
| #define KEYPAD_ROWS 9 |
| #define KEYPAD_COLS 9 |
| |
| #define DEBOUNCE_MIN 0x400ul |
| #define DEBOUNCE_MAX 0x3ffffffful |
| |
| struct keypad_regs { |
| u32 rev; |
| u32 mode; |
| u32 mask; |
| u32 pol; |
| u32 dclock; |
| u32 rclock; |
| u32 stable_cnt; |
| u32 in_en; |
| u32 out; |
| u32 out_en; |
| u32 in; |
| u32 lock; |
| u32 pres[3]; |
| }; |
| |
| #define keypad_read(kp, reg) __raw_readl(&(kp)->regs->reg) |
| #define keypad_write(kp, reg, val) __raw_writel(val, &(kp)->regs->reg) |
| |
| struct keypad_data { |
| struct input_dev *input_dev; |
| struct resource *res; |
| struct keypad_regs __iomem *regs; |
| struct clk *clk; |
| struct device *dev; |
| spinlock_t lock; |
| u32 irq_press; |
| u32 irq_release; |
| int rows, cols, row_shift; |
| int debounce_ms, active_low; |
| u32 prev_keys[3]; |
| unsigned short keycodes[]; |
| }; |
| |
| static irqreturn_t keypad_irq(int irq, void *data) |
| { |
| struct keypad_data *kp = data; |
| int i, bit, val, row, col, code; |
| unsigned long flags; |
| u32 curr_keys[3]; |
| u32 change; |
| |
| spin_lock_irqsave(&kp->lock, flags); |
| |
| memset(curr_keys, 0, sizeof(curr_keys)); |
| if (irq == kp->irq_press) |
| for (i = 0; i < 3; i++) |
| curr_keys[i] = keypad_read(kp, pres[i]); |
| |
| for (i = 0; i < 3; i++) { |
| change = curr_keys[i] ^ kp->prev_keys[i]; |
| |
| while (change) { |
| bit = fls(change) - 1; |
| change ^= BIT(bit); |
| val = curr_keys[i] & BIT(bit); |
| bit += i * 32; |
| row = bit / KEYPAD_COLS; |
| col = bit % KEYPAD_COLS; |
| |
| code = MATRIX_SCAN_CODE(row, col, kp->row_shift); |
| input_event(kp->input_dev, EV_MSC, MSC_SCAN, code); |
| input_report_key(kp->input_dev, kp->keycodes[code], |
| val); |
| } |
| } |
| input_sync(kp->input_dev); |
| memcpy(kp->prev_keys, curr_keys, sizeof(curr_keys)); |
| |
| if (irq == kp->irq_press) |
| keypad_write(kp, lock, 0); /* Allow hardware updates */ |
| |
| spin_unlock_irqrestore(&kp->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int keypad_start(struct input_dev *dev) |
| { |
| struct keypad_data *kp = input_get_drvdata(dev); |
| unsigned long mask, debounce, clk_rate_khz; |
| unsigned long flags; |
| |
| clk_enable(kp->clk); |
| clk_rate_khz = clk_get_rate(kp->clk) / 1000; |
| |
| spin_lock_irqsave(&kp->lock, flags); |
| |
| /* Initialize device registers */ |
| keypad_write(kp, mode, 0); |
| |
| mask = BITS(kp->rows) << KEYPAD_COLS; |
| mask |= BITS(kp->cols); |
| keypad_write(kp, mask, ~mask); |
| |
| keypad_write(kp, pol, kp->active_low ? 0 : 0x3ffff); |
| keypad_write(kp, stable_cnt, 3); |
| |
| debounce = kp->debounce_ms * clk_rate_khz; |
| debounce = clamp(debounce, DEBOUNCE_MIN, DEBOUNCE_MAX); |
| keypad_write(kp, dclock, debounce); |
| keypad_write(kp, rclock, 4 * debounce); |
| |
| keypad_write(kp, in_en, 1); |
| |
| spin_unlock_irqrestore(&kp->lock, flags); |
| |
| return 0; |
| } |
| |
| static void keypad_stop(struct input_dev *dev) |
| { |
| struct keypad_data *kp = input_get_drvdata(dev); |
| |
| synchronize_irq(kp->irq_press); |
| synchronize_irq(kp->irq_release); |
| clk_disable(kp->clk); |
| } |
| |
| static int __devinit keypad_probe(struct platform_device *pdev) |
| { |
| const struct matrix_keypad_platform_data *pdata; |
| const struct matrix_keymap_data *keymap_data; |
| struct device *dev = &pdev->dev; |
| struct keypad_data *kp; |
| int error = 0, sz, row_shift; |
| u32 rev = 0; |
| |
| pdata = pdev->dev.platform_data; |
| if (!pdata) { |
| dev_err(dev, "cannot find device data\n"); |
| return -EINVAL; |
| } |
| |
| keymap_data = pdata->keymap_data; |
| if (!keymap_data) { |
| dev_err(dev, "cannot find keymap data\n"); |
| return -EINVAL; |
| } |
| |
| row_shift = get_count_order(pdata->num_col_gpios); |
| sz = offsetof(struct keypad_data, keycodes); |
| sz += (pdata->num_row_gpios << row_shift) * sizeof(kp->keycodes[0]); |
| kp = kzalloc(sz, GFP_KERNEL); |
| if (!kp) { |
| dev_err(dev, "cannot allocate device info\n"); |
| return -ENOMEM; |
| } |
| |
| kp->dev = dev; |
| kp->rows = pdata->num_row_gpios; |
| kp->cols = pdata->num_col_gpios; |
| kp->row_shift = row_shift; |
| platform_set_drvdata(pdev, kp); |
| spin_lock_init(&kp->lock); |
| |
| kp->irq_press = platform_get_irq_byname(pdev, "press"); |
| kp->irq_release = platform_get_irq_byname(pdev, "release"); |
| if (kp->irq_press < 0 || kp->irq_release < 0) { |
| dev_err(dev, "cannot determine device interrupts\n"); |
| error = -ENODEV; |
| goto error_res; |
| } |
| |
| kp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!kp->res) { |
| dev_err(dev, "cannot determine register area\n"); |
| error = -ENODEV; |
| goto error_res; |
| } |
| |
| if (!request_mem_region(kp->res->start, resource_size(kp->res), |
| pdev->name)) { |
| dev_err(dev, "cannot claim register memory\n"); |
| kp->res = NULL; |
| error = -EINVAL; |
| goto error_res; |
| } |
| |
| kp->regs = ioremap(kp->res->start, resource_size(kp->res)); |
| if (!kp->regs) { |
| dev_err(dev, "cannot map register memory\n"); |
| error = -ENOMEM; |
| goto error_map; |
| } |
| |
| kp->clk = clk_get(dev, NULL); |
| if (IS_ERR(kp->clk)) { |
| dev_err(dev, "cannot claim device clock\n"); |
| error = PTR_ERR(kp->clk); |
| goto error_clk; |
| } |
| |
| error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, |
| IRQF_ONESHOT, dev_name(dev), kp); |
| if (error < 0) { |
| dev_err(kp->dev, "Could not allocate keypad press key irq\n"); |
| goto error_irq_press; |
| } |
| |
| error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, |
| IRQF_ONESHOT, dev_name(dev), kp); |
| if (error < 0) { |
| dev_err(kp->dev, "Could not allocate keypad release key irq\n"); |
| goto error_irq_release; |
| } |
| |
| kp->input_dev = input_allocate_device(); |
| if (!kp->input_dev) { |
| dev_err(dev, "cannot allocate input device\n"); |
| error = -ENOMEM; |
| goto error_input; |
| } |
| |
| kp->input_dev->name = pdev->name; |
| kp->input_dev->dev.parent = &pdev->dev; |
| kp->input_dev->open = keypad_start; |
| kp->input_dev->close = keypad_stop; |
| |
| clk_enable(kp->clk); |
| rev = keypad_read(kp, rev); |
| kp->input_dev->id.bustype = BUS_HOST; |
| kp->input_dev->id.product = ((rev >> 8) & 0x07); |
| kp->input_dev->id.version = ((rev >> 16) & 0xfff); |
| clk_disable(kp->clk); |
| |
| error = matrix_keypad_build_keymap(keymap_data, NULL, |
| kp->rows, kp->cols, |
| kp->keycodes, kp->input_dev); |
| if (error) { |
| dev_err(dev, "Failed to build keymap\n"); |
| goto error_reg; |
| } |
| |
| if (!pdata->no_autorepeat) |
| kp->input_dev->evbit[0] |= BIT_MASK(EV_REP); |
| input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN); |
| |
| input_set_drvdata(kp->input_dev, kp); |
| |
| error = input_register_device(kp->input_dev); |
| if (error < 0) { |
| dev_err(dev, "Could not register input device\n"); |
| goto error_reg; |
| } |
| |
| return 0; |
| |
| |
| error_reg: |
| input_free_device(kp->input_dev); |
| error_input: |
| free_irq(kp->irq_release, kp); |
| error_irq_release: |
| free_irq(kp->irq_press, kp); |
| error_irq_press: |
| clk_put(kp->clk); |
| error_clk: |
| iounmap(kp->regs); |
| error_map: |
| release_mem_region(kp->res->start, resource_size(kp->res)); |
| error_res: |
| platform_set_drvdata(pdev, NULL); |
| kfree(kp); |
| return error; |
| } |
| |
| static int __devexit keypad_remove(struct platform_device *pdev) |
| { |
| struct keypad_data *kp = platform_get_drvdata(pdev); |
| |
| free_irq(kp->irq_press, kp); |
| free_irq(kp->irq_release, kp); |
| input_unregister_device(kp->input_dev); |
| clk_put(kp->clk); |
| iounmap(kp->regs); |
| release_mem_region(kp->res->start, resource_size(kp->res)); |
| platform_set_drvdata(pdev, NULL); |
| kfree(kp); |
| |
| return 0; |
| } |
| |
| static struct platform_driver keypad_driver = { |
| .probe = keypad_probe, |
| .remove = keypad_remove, |
| .driver.name = "tnetv107x-keypad", |
| .driver.owner = THIS_MODULE, |
| }; |
| module_platform_driver(keypad_driver); |
| |
| MODULE_AUTHOR("Cyril Chemparathy"); |
| MODULE_DESCRIPTION("TNETV107X Keypad Driver"); |
| MODULE_ALIAS("platform:tnetv107x-keypad"); |
| MODULE_LICENSE("GPL"); |