| /* |
| * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc. |
| * |
| * Author: Courtney Cavin <courtney.cavin@sonyericsson.com> |
| * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2, as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <linux/delay.h> |
| #include <linux/input/gp2ap002a00f.h> |
| |
| struct gp2a_data { |
| struct input_dev *input; |
| const struct gp2a_platform_data *pdata; |
| struct i2c_client *i2c_client; |
| }; |
| |
| enum gp2a_addr { |
| GP2A_ADDR_PROX = 0x0, |
| GP2A_ADDR_GAIN = 0x1, |
| GP2A_ADDR_HYS = 0x2, |
| GP2A_ADDR_CYCLE = 0x3, |
| GP2A_ADDR_OPMOD = 0x4, |
| GP2A_ADDR_CON = 0x6 |
| }; |
| |
| enum gp2a_controls { |
| /* Software Shutdown control: 0 = shutdown, 1 = normal operation */ |
| GP2A_CTRL_SSD = 0x01 |
| }; |
| |
| static int gp2a_report(struct gp2a_data *dt) |
| { |
| int vo = gpio_get_value(dt->pdata->vout_gpio); |
| |
| input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo); |
| input_sync(dt->input); |
| |
| return 0; |
| } |
| |
| static irqreturn_t gp2a_irq(int irq, void *handle) |
| { |
| struct gp2a_data *dt = handle; |
| |
| gp2a_report(dt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int gp2a_enable(struct gp2a_data *dt) |
| { |
| return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, |
| GP2A_CTRL_SSD); |
| } |
| |
| static int gp2a_disable(struct gp2a_data *dt) |
| { |
| return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD, |
| 0x00); |
| } |
| |
| static int gp2a_device_open(struct input_dev *dev) |
| { |
| struct gp2a_data *dt = input_get_drvdata(dev); |
| int error; |
| |
| error = gp2a_enable(dt); |
| if (error < 0) { |
| dev_err(&dt->i2c_client->dev, |
| "unable to activate, err %d\n", error); |
| return error; |
| } |
| |
| gp2a_report(dt); |
| |
| return 0; |
| } |
| |
| static void gp2a_device_close(struct input_dev *dev) |
| { |
| struct gp2a_data *dt = input_get_drvdata(dev); |
| int error; |
| |
| error = gp2a_disable(dt); |
| if (error < 0) |
| dev_err(&dt->i2c_client->dev, |
| "unable to deactivate, err %d\n", error); |
| } |
| |
| static int __devinit gp2a_initialize(struct gp2a_data *dt) |
| { |
| int error; |
| |
| error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN, |
| 0x08); |
| if (error < 0) |
| return error; |
| |
| error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS, |
| 0xc2); |
| if (error < 0) |
| return error; |
| |
| error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE, |
| 0x04); |
| if (error < 0) |
| return error; |
| |
| error = gp2a_disable(dt); |
| |
| return error; |
| } |
| |
| static int __devinit gp2a_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| const struct gp2a_platform_data *pdata = client->dev.platform_data; |
| struct gp2a_data *dt; |
| int error; |
| |
| if (!pdata) |
| return -EINVAL; |
| |
| if (pdata->hw_setup) { |
| error = pdata->hw_setup(client); |
| if (error < 0) |
| return error; |
| } |
| |
| error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME); |
| if (error) |
| goto err_hw_shutdown; |
| |
| dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL); |
| if (!dt) { |
| error = -ENOMEM; |
| goto err_free_gpio; |
| } |
| |
| dt->pdata = pdata; |
| dt->i2c_client = client; |
| |
| error = gp2a_initialize(dt); |
| if (error < 0) |
| goto err_free_mem; |
| |
| dt->input = input_allocate_device(); |
| if (!dt->input) { |
| error = -ENOMEM; |
| goto err_free_mem; |
| } |
| |
| input_set_drvdata(dt->input, dt); |
| |
| dt->input->open = gp2a_device_open; |
| dt->input->close = gp2a_device_close; |
| dt->input->name = GP2A_I2C_NAME; |
| dt->input->id.bustype = BUS_I2C; |
| dt->input->dev.parent = &client->dev; |
| |
| input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY); |
| |
| error = request_threaded_irq(client->irq, NULL, gp2a_irq, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT, |
| GP2A_I2C_NAME, dt); |
| if (error) { |
| dev_err(&client->dev, "irq request failed\n"); |
| goto err_free_input_dev; |
| } |
| |
| error = input_register_device(dt->input); |
| if (error) { |
| dev_err(&client->dev, "device registration failed\n"); |
| goto err_free_irq; |
| } |
| |
| device_init_wakeup(&client->dev, pdata->wakeup); |
| i2c_set_clientdata(client, dt); |
| |
| return 0; |
| |
| err_free_irq: |
| free_irq(client->irq, dt); |
| err_free_input_dev: |
| input_free_device(dt->input); |
| err_free_mem: |
| kfree(dt); |
| err_free_gpio: |
| gpio_free(pdata->vout_gpio); |
| err_hw_shutdown: |
| if (pdata->hw_shutdown) |
| pdata->hw_shutdown(client); |
| return error; |
| } |
| |
| static int __devexit gp2a_remove(struct i2c_client *client) |
| { |
| struct gp2a_data *dt = i2c_get_clientdata(client); |
| const struct gp2a_platform_data *pdata = dt->pdata; |
| |
| device_init_wakeup(&client->dev, false); |
| |
| free_irq(client->irq, dt); |
| |
| input_unregister_device(dt->input); |
| kfree(dt); |
| |
| gpio_free(pdata->vout_gpio); |
| |
| if (pdata->hw_shutdown) |
| pdata->hw_shutdown(client); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int gp2a_suspend(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct gp2a_data *dt = i2c_get_clientdata(client); |
| int retval = 0; |
| |
| if (device_may_wakeup(&client->dev)) { |
| enable_irq_wake(client->irq); |
| } else { |
| mutex_lock(&dt->input->mutex); |
| if (dt->input->users) |
| retval = gp2a_disable(dt); |
| mutex_unlock(&dt->input->mutex); |
| } |
| |
| return retval; |
| } |
| |
| static int gp2a_resume(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct gp2a_data *dt = i2c_get_clientdata(client); |
| int retval = 0; |
| |
| if (device_may_wakeup(&client->dev)) { |
| disable_irq_wake(client->irq); |
| } else { |
| mutex_lock(&dt->input->mutex); |
| if (dt->input->users) |
| retval = gp2a_enable(dt); |
| mutex_unlock(&dt->input->mutex); |
| } |
| |
| return retval; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume); |
| |
| static const struct i2c_device_id gp2a_i2c_id[] = { |
| { GP2A_I2C_NAME, 0 }, |
| { } |
| }; |
| |
| static struct i2c_driver gp2a_i2c_driver = { |
| .driver = { |
| .name = GP2A_I2C_NAME, |
| .owner = THIS_MODULE, |
| .pm = &gp2a_pm, |
| }, |
| .probe = gp2a_probe, |
| .remove = gp2a_remove, |
| .id_table = gp2a_i2c_id, |
| }; |
| |
| module_i2c_driver(gp2a_i2c_driver); |
| |
| MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>"); |
| MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"); |
| MODULE_LICENSE("GPL v2"); |